Attachment 102376 Details for Bug 213840

dmesg - with Stefan comment #25

dmesg-xorg-x11-driver-video.txt (text/plain), 17.54 KB, created by Tamás Cservenák on 2006-10-23 22:03:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tamás Cservenák

Created: 2006-10-23 22:03:45 UTC

Size: 17.54 KB

patch

obsolete

>Linux version 2.6.18.1-3-default (geeko@buildhost) (gcc version 4.1.2 20061013 (prerelease) (SUSE Linux)) #1 SMP Mon Oct 16 19:24:36 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5d10
>On node 0 totalpages: 262128
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32752 pages, LIFO batch:7
>DMI 2.2 present.
>Using APIC driver default
>IO/L-APIC allowed because system is MP or new enough
>ACPI: RSDP (v000 IntelR                                ) @ 0x000f95e0
>ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
>ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
>ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7a40
>ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Detected 2606.063 MHz processor.
>Built 1 zonelists.  Total pages: 262128
>Kernel command line: root=/dev/sda5 vga=0x317    resume=/dev/sda2  splash=silent 3
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032644k/1048512k available (1700k kernel code, 15224k reserved, 681k data, 196k init, 131008k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5215.89 BogoMIPS (lpj=10431784)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>checking if image is initramfs... it is
>Freeing initrd memory: 2871k freed
>ACPI: Core revision 20060707
> not found!
>CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5212.18 BogoMIPS (lpj=10424378)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09
>Total of 2 processors activated (10428.08 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=48
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb720, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: Power Resource [PFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: f8000000-f9ffffff
>  PREFETCH window: d0000000-efffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-afff
>  MEM window: fa000000-fbffffff
>  PREFETCH window: 50000000-500fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Machine check exception polling timer started.
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1161647145.952:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 131072k
>vesafb: mode is 1024x768x16, linelength=2048, pages=84
>vesafb: protected mode interface info at c000:579f
>vesafb: pmi: set display start = c00c5833, set palette = c00c587f
>vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 62426 bytes, v3).
>Console: switching to colour frame buffer device 124x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>input: AT Translated Set 2 keyboard as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 196k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
>Probing IDE interface ide0...
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>Probing IDE interface ide1...
>hdd: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac6
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: PATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 169
>ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 169
>scsi0 : ata_piix
>ata1.00: ATA-6, max UDMA/100, 321672960 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>ATA: abnormal status 0x7F on port 0xC807
>  Vendor: ATA       Model: HDS722516VLSA80   Rev: V34O
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
>sd 0:0:0:0: Attached scsi disk sda
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ACPI: Invalid passive threshold
>ACPI: Thermal Zone [THRM] (52 C)
>ACPI: Transitioning device [FAN] to D3
>ACPI: Transitioning device [FAN] to D3
>ACPI: Fan [FAN] (off)
>Attempting manual resume
>ReiserFS: sda5: found reiserfs format "3.6" with standard journal
>ReiserFS: sda5: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda5: checking transaction log (sda5)
>ReiserFS: sda5: Using r5 hash to sort names
>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
>audit(1161647154.540:2): AppArmor (version 2.0-19.43r6320) initialized
>
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>intel_rng: module not supported by Novell, setting U taint flag.
>Intel 82802 RNG detected
>USB Universal Host Controller Interface driver v3.0
>edac_mc: module not supported by Novell, setting U taint flag.
>EDAC MC: Ver: 2.0.1 Oct 17 2006
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000bc00
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.18.1-3-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Linux agpgart interface v0.101 (c) Dave Jones
>i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000b000
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.18.1-3-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>hdd: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000b400
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.18.1-3-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000b800
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.18.1-3-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>agpgart: Detected an Intel i875 Chipset.
>agpgart: AGP aperture is 128M @ 0xf0000000
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 52805 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 201, io mem 0xfc000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.18.1-3-default ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 193
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 169
>8139too Fast Ethernet driver 0.9.27
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169]  MMIO=[fb006000-fb0067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 209
>eth0: RealTek RTL8139 at 0xf887e000, 00:40:f4:65:16:9b, IRQ 209
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00508d0000fa44ba]
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>loop: loaded (max 8 devices)
>ReiserFS: sda6: found reiserfs format "3.6" with standard journal
>ReiserFS: sda6: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda6: checking transaction log (sda6)
>ReiserFS: sda6: Using r5 hash to sort names
>NTFS driver 2.1.27 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>Adding 1044216k swap on /dev/sda2.  Priority:-1 extents:1 across:1044216k
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>NET: Registered protocol family 17
>audit(1161640028.400:3): REJECTING access to capability 'sys_tty_config' (mdnsd(2707) profile /usr/sbin/mdnsd active /usr/sbin/mdnsd)
>audit(1161640029.324:4): audit_backlog_limit=256 old=64 by auid=4294967295
>audit(1161640029.552:5): audit_pid=2767 old=0 by auid=4294967295
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>ACPI: Invalid passive threshold
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 213840: 102088 | 102089 | 102091 | 102092 | 102098 | 102101 | 102123 | 102124 | 102125 | 102126 | 102346 | 102376 | 102377 | 102378