Attachment 107800 Details for Bug 225135

dmesg output

dmesg (text/plain), 27.47 KB, created by Norman Cleesattel on 2006-12-01 06:56:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Norman Cleesattel

Created: 2006-12-01 06:56:35 UTC

Size: 27.47 KB

patch

obsolete

> 
>Linux version 2.6.18.2-23-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Tue Nov 21 12:59:21 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
> BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
> BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 524192
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 294816 pages, LIFO batch:31
>DMI 2.4 present.
>Using APIC driver default
>IO/L-APIC allowed because system is MP or new enough
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000fa980
>ACPI: XSDT (v001 A M I  OEMXSDT  0x10000626 MSFT 0x00000097) @ 0x7ffa0100
>ACPI: FADT (v003 A M I  OEMFACP  0x10000626 MSFT 0x00000097) @ 0x7ffa0290
>ACPI: MADT (v001 A M I  OEMAPIC  0x10000626 MSFT 0x00000097) @ 0x7ffa0390
>ACPI: MCFG (v001 A M I  OEMMCFG  0x10000626 MSFT 0x00000097) @ 0x7ffa0400
>ACPI: OEMB (v001 A M I  AMI_OEM  0x10000626 MSFT 0x00000097) @ 0x7ffae040
>ACPI: HPET (v001 A M I  OEMHPET  0x10000626 MSFT 0x00000097) @ 0x7ffa8eb0
>ACPI: DSDT (v001  A0637 A0637000 0x00000000 INTL 0x20060113) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a202 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
>Detected 2402.055 MHz processor.
>Built 1 zonelists.  Total pages: 524192
>Kernel command line: root=/dev/sda2 vga=0x31a resume=/dev/sda3  splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2071976k/2096768k available (1696k kernel code, 23476k reserved, 965k data, 196k init, 1179264k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 4807.15 BogoMIPS (lpj=9614306)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>checking if image is initramfs... it is
>Freeing initrd memory: 2913k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4803.92 BogoMIPS (lpj=9607851)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>Total of 2 processors activated (9611.07 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=32
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:06: ioport range 0x290-0x297 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f4800000-fe8fffff
>  PREFETCH window: cfe00000-dfdfffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: dfe00000-dfefffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: fe900000-fe9fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: fea00000-feafffff
>  PREFETCH window: 88000000-880fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>Machine check exception polling timer started.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1164955140.776:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 131072k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: protected mode interface info at c000:d460
>vesafb: pmi: set display start = c00cd496, set palette = c00cd500
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 76041 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>input: AT Translated Set 2 keyboard as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 196k freed
>Time: tsc clocksource has been installed.
>SCSI subsystem initialized
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU2PM] [20060707]
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports ? Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ilck stag led pmp pio
>ata1: SATA max UDMA/133 cmd 0xF8836900 ctl 0x0 bmdma 0x0 irq 217
>ata2: SATA max UDMA/133 cmd 0xF8836980 ctl 0x0 bmdma 0x0 irq 217
>ata3: SATA max UDMA/133 cmd 0xF8836A00 ctl 0x0 bmdma 0x0 irq 217
>ata4: SATA max UDMA/133 cmd 0xF8836A80 ctl 0x0 bmdma 0x0 irq 217
>ata5: SATA max UDMA/133 cmd 0xF8836B00 ctl 0x0 bmdma 0x0 irq 217
>ata6: SATA max UDMA/133 cmd 0xF8836B80 ctl 0x0 bmdma 0x0 irq 217
>scsi0 : ahci
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi2 : ahci
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi4 : ahci
>ata5: SATA link down (SStatus 0 SControl 300)
>scsi5 : ahci
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata6.00: ATAPI, max UDMA/66
>ata6.00: configured for UDMA/66
>  Vendor: ATA       Model: ST3750640AS       Rev: 3.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 > sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: PLEXTOR   Model: DVDR   PX-755A    Rev: 1.06
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 5:0:0:0: Attached scsi generic sg1 type 5
>Attempting manual resume
>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>ReiserFS: sda2: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda2: checking transaction log (sda2)
>ReiserFS: sda2: Using r5 hash to sort names
>lp: driver loaded but no devices found
>PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 225
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000e000
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.18.2-23-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Linux agpgart interface v0.101 (c) Dave Jones
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 233, io base 0x0000e080
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.18.2-23-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 50
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:04:01.0: 3Com PCI 3c905B Cyclone 100baseTx at f96aec00.
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
>gameport: EMU10K1 is pci0000:04:02.1/gameport0, io 0xcc00, speed 1028kHz
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 225, io mem 0xfebff400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.18.2-23-default ehci_hcd
>usb usb3: SerialNumber: 0000:00:1a.7
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 58
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 58, io base 0x0000d800
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.18.2-23-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000d880
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.18.2-23-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.1
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 3-2: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000dc00
>usb usb6: new device found, idVendor=0000, idProduct=0000
>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.18.2-23-default uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.2
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 3-2: new device found, idVendor=0dda, idProduct=2001
>usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-2: Product: USB2.0 Card Reader
>usb 3-2: Manufacturer: ICSI
>usb 3-2: SerialNumber: 00000000001
>usb 3-2: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 23 (level, low) -> IRQ 58
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 58
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ALSA sound/pci/emu10k1/emufx.c:1435: Installing spdif_bug patch: Audigy 2 ZS [SB0350]
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 58, io mem 0xfebff000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: new device found, idVendor=0000, idProduct=0000
>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.18.2-23-default ehci_hcd
>usb usb7: SerialNumber: 0000:00:1d.7
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:04:02.2[B] -> GSI 20 (level, low) -> IRQ 66
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[66]  MMIO=[feaff000-feaff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 21 (level, low) -> IRQ 74
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ohci1394: fw-host1: OHCI-1394 1.0 (PCI): IRQ=[74]  MMIO=[feafe800-feafefff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9629  Wed Nov  1 19:30:07 PST 2006
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb 7-1: new high speed USB device using ehci_hcd and address 2
>usb 7-1: new device found, idVendor=0424, idProduct=2504
>usb 7-1: new device strings: Mfr=0, Product=0, SerialNumber=0
>usb 7-1: configuration #1 chosen from 1 choice
>hub 7-1:1.0: USB hub found
>hub 7-1:1.0: 4 ports detected
>usb 7-1.3: new low speed USB device using ehci_hcd and address 3
>usb 7-1.3: new device found, idVendor=046d, idProduct=c01e
>usb 7-1.3: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 7-1.3: Product: USB-PS/2 Optical Mouse
>usb 7-1.3: Manufacturer: Logitech
>usb 7-1.3: configuration #1 chosen from 1 choice
>usb 7-1.4: new full speed USB device using ehci_hcd and address 4
>  Vendor: ICSI      Model: CF Card       CF  Rev: 1.6B
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 6:0:0:0: Attached scsi removable disk sdb
>sd 6:0:0:0: Attached scsi generic sg2 type 0
>  Vendor: ICSI      Model: MS Card       MS  Rev: 1.6B
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>usb 7-1.4: new device found, idVendor=044f, idProduct=0400
>usb 7-1.4: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 7-1.4: Product: Thrustmaster HOTAS Cougar
>usb 7-1.4: Manufacturer: Thrustmaster
>usb 7-1.4: configuration #1 chosen from 1 choice
>usbcore: registered new driver usb-storage
>usbcore: registered new driver hiddev
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.3
>input: Thrustmaster Thrustmaster HOTAS Cougar as /class/input/input3
>input: USB HID v1.10 Joystick [Thrustmaster Thrustmaster HOTAS Cougar] on usb-0000:00:1d.7-1.4
>input: Thrustmaster Thrustmaster HOTAS Cougar as /class/input/input4
>input: USB HID v1.00 Keyboard [Thrustmaster Thrustmaster HOTAS Cougar] on usb-0000:00:1d.7-1.4
>input: Thrustmaster Thrustmaster HOTAS Cougar as /class/input/input5
>input: USB HID v1.00 Mouse [Thrustmaster Thrustmaster HOTAS Cougar] on usb-0000:00:1d.7-1.4
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>sd 6:0:0:1: Attached scsi removable disk sdc
>sd 6:0:0:1: Attached scsi generic sg3 type 0
>USB Mass Storage support registered.
>  Vendor: ICSI      Model: SD Card   MMC/SD  Rev: 1.6B
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 6:0:0:2: Attached scsi removable disk sdd
>sd 6:0:0:2: Attached scsi generic sg4 type 0
>  Vendor: ICSI      Model: Combo Card    SM  Rev: 1.6B
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 6:0:0:3: Attached scsi removable disk sde
>sd 6:0:0:3: Attached scsi generic sg5 type 0
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c015110d16c]
>usb-storage: device scan complete
>Adding 4217052k swap on /dev/sda3.  Priority:-1 extents:1 across:4217052k
>ieee1394: Host added: ID:BUS[1-00:1023]  GUID[0011d80000de815c]
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>loop: loaded (max 8 devices)
>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>ReiserFS: sda7: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda7: checking transaction log (sda7)
>ReiserFS: sda7: Using r5 hash to sort names
>ReiserFS: sda5: found reiserfs format "3.6" with standard journal
>ReiserFS: sda5: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda5: checking transaction log (sda5)
>ReiserFS: sda5: Using r5 hash to sort names
>ReiserFS: sda6: found reiserfs format "3.6" with standard journal
>ReiserFS: sda6: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda6: checking transaction log (sda6)
>ReiserFS: sda6: Using r5 hash to sort names
>mbcache: module not supported by Novell, setting U taint flag.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda10, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>AppArmor: AppArmor initialized
>audit(1164955185.294:2): AppArmor initialized
>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>eth0:  setting full-duplex.
>NET: Registered protocol family 17
>audit(1164954894.073:3): audit_backlog_limit=256 old=64 by auid=4294967295
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>audit(1164954894.673:4): audit_pid=4104 old=0 by auid=4294967295
>eth0: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:6e:36:be:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=40655 DF OPT (94040000) PROTO=2
>ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-0: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-0: checking transaction log (dm-0)
>ReiserFS: dm-0: Using r5 hash to sort names
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:6e:36:be:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=40911 DF OPT (94040000) PROTO=2
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:6e:36:be:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=41167 DF OPT (94040000) PROTO=2
>usb 3-1: new high speed USB device using ehci_hcd and address 3
>usb 3-1: new device found, idVendor=090c, idProduct=1000
>usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-1: Product: Cn Memory
>usb 3-1: SerialNumber: AA04012700020090
>usb 3-1: configuration #1 chosen from 1 choice
>scsi7 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>  Vendor:           Model: Cn Memory         Rev: 1100
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdf: 1981440 512-byte hdwr sectors (1014 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 43 00 00 00
>sdf: assuming drive cache: write through
>SCSI device sdf: 1981440 512-byte hdwr sectors (1014 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 43 00 00 00
>sdf: assuming drive cache: write through
> sdf: sdf1
>sd 7:0:0:0: Attached scsi removable disk sdf
>sd 7:0:0:0: Attached scsi generic sg6 type 0
>usb-storage: device scan complete
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:15:0c:6e:36:be:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=41423 DF OPT (94040000) PROTO=2

Actions: View

Attachments on bug 225135: 107800 | 108970 | 109986 | 109987 | 109988 | 110201 | 110202 | 110203