Attachment 110440 Details for Bug 229260

Output from "dmesg"

dmesg.log (text/plain), 24.47 KB, created by Benjamin McCann on 2006-12-20 01:24:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Benjamin McCann

Created: 2006-12-20 01:24:00 UTC

Size: 24.47 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/sda2 vga=0x31a    resume=/dev/sda1 splash=silent)
>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffef800 (usable)
> BIOS-e820: 000000007ffef800 - 000000007fff0000 (reserved)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>DMI 2.2 present.
>ACPI: RSDP (v000 IntelR                                ) @ 0x00000000000f76b0
>ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff3040
>ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff30c0
>ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff7e00
>ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff7d00
>ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ffef000
>Bootmem setup node 0 0000000000000000-000000007ffef000
>On node 0 totalpages: 515957
>  DMA zone: 2893 pages, LIFO batch:0
>  DMA32 zone: 513064 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>Built 1 zonelists.  Total pages: 515957
>Kernel command line: root=/dev/sda2 vga=0x31a    resume=/dev/sda1 splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 2660.085 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Memory: 2057436k/2097084k available (1915k kernel code, 39260k reserved, 1278k data, 188k init)
>Calibrating delay using timer specific routine.. 5325.25 BogoMIPS (lpj=10650515)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>checking if image is initramfs... it is
>Freeing initrd memory: 3071k freed
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 8312685
>Detected 8.312 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5320.42 BogoMIPS (lpj=10640841)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>             Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>Brought up 2 CPUs
>testing NMI watchdog ... OK.
>migration_cost=611
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:02:02.0
>  IO window: d000-dfff
>  MEM window: dfe00000-dfefffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-efff
>  MEM window: d8000000-dfffffff
>  PREFETCH window: d0000000-d7ffffff
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1166494967.888:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 10240k, total 262144k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 1
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 188k freed
>SCSI subsystem initialized
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x2
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI: Thermal Zone [THRM] (40 C)
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac7
>ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
>GSI 17 sharing vector 0xC1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFB00 irq 14
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFB08 irq 15
>scsi0 : ata_piix
>ata1.00: ATA-5, max UDMA/100, 117231408 sectors: LBA 
>ata1.00: ata1: dev 0 multi count 16
>ata1.01: ATAPI, max UDMA/33
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>scsi1 : ata_piix
>ATA: abnormal status 0x7F on port 0x177
>ATA: abnormal status 0x7F on port 0x177
>ata2.01: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32)
>ata2.01: ata2: dev 1 multi count 16
>ata2.01: configured for UDMA/133
>  Vendor: ATA       Model: WDC WD600BB-00CA  Rev: 17.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 36 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: port failed to respond (30 secs, Status 0xd0)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 36 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: port failed to respond (30 secs, Status 0xd0)
>Losing some ticks... checking if CPU frequency changed.
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 36 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: port failed to respond (30 secs, Status 0xd0)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>ata1.01: limiting speed to UDMA/25
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 36 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: port failed to respond (30 secs, Status 0xd0)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/25
>ata1: EH complete
>  Vendor: ATA       Model: ST3500641AS       Rev: 3.AD
>SCSI device sda: drive cache: write back
>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
> sdb: sdb1
>sd 1:0:1:0: Attached scsi disk sdb
>sd 1:0:1:0: Attached scsi generic sg1 type 0
>ACPI: Fan [FAN] (on)
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>intel_rng: FWH not detected
>hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
>ieee1394: Initialized config rom entry `ip1394'
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>USB Universal Host Controller Interface driver v3.0
>ALSA sound/pci/hda/hda_codec.c:2117: autoconfig: line_outs=4 (0x14/0x17/0x16/0x15/0x0)
>ALSA sound/pci/hda/hda_codec.c:2121:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2123:    hp=0x0, dig_out=0x1e, din_in=0x0
>ALSA sound/pci/hda/hda_codec.c:2131:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x1c
>agpgart: Detected an Intel 945G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>GSI 18 sharing vector 0xC9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 201, io base 0x0000ff00
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000fe00
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 19 sharing vector 0xD1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 209, io base 0x0000fd00
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>nvidia: module license 'NVIDIA' taints kernel.
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new device found, idVendor=0471, idProduct=0815
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: eHome Infrared Transceiver
>usb 1-1: Manufacturer: Philips
>usb 1-1: SerialNumber: PH00OsT9
>usb 1-1: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000fc00
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 201, io mem 0xfdfff000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193]  MMIO=[dffff000-dffff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 1-1: USB disconnect, address 2
>r8169 Gigabit Ethernet driver 2.2LK loaded
>GSI 20 sharing vector 0xD9 and IRQ 20
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 217
>eth0: RTL8169s/8110s at 0xffffc20010084000, 00:16:ec:14:b5:19, IRQ 217
>lirc_dev: IR Remote Control driver registered, at major 61 
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-9631  Thu Nov  9 17:35:27 PST 2006
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 193
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>
>lirc_mceusb2: USB remote driver for LIRC v0.22
>lirc_mceusb2: Martin Blatter <martin_a_blatter@yahoo.com>
>Linux video capture interface: v2.00
>ivtv:  ==================== START INIT IVTV ====================
>ivtv:  version 0.8.0 (tagged release) loading
>ivtv:  Linux version: 2.6.18.2-34-default SMP mod_unload gcc-4.1
>ivtv:  In case of problems please include the debug info between
>ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
>ivtv:  any module options, when mailing the ivtv-users mailinglist.
>usb 5-6: new high speed USB device using ehci_hcd and address 4
>usb 5-6: new device found, idVendor=058f, idProduct=6362
>usb 5-6: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-6: Product: Mass Storage Device
>usb 5-6: Manufacturer: Generic
>usb 5-6: SerialNumber: 058F312D81B
>usb 5-6: configuration #1 chosen from 1 choice
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00000ae6ff46fc60]
>usbcore: registered new driver lirc_mceusb2
>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 19 (level, low) -> IRQ 193
>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Initializing USB Mass Storage driver...
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>usb 2-1: new device found, idVendor=046d, idProduct=c517
>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB Receiver
>usb 2-1: Manufacturer: Logitech
>usb 2-1: configuration #1 chosen from 1 choice
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usb 1-1: new full speed USB device using uhci_hcd and address 3
>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
>ivtv0: did you put the firmware in the hotplug firmware directory?
>ivtv0 warning: failed loading encoder firmware
>ivtv0 warning: Error loading firmware -3!
>ivtv0: Error -3 initializing firmware.
>Trying to free already-free IRQ 193
>ivtv0: Error -12 on initialization
>ivtv: probe of 0000:03:08.0 failed with error -12
>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
>ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 20 (level, low) -> IRQ 217
>usb 1-1: new device found, idVendor=0471, idProduct=0815
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: eHome Infrared Transceiver
>usb 1-1: Manufacturer: Philips
>usb 1-1: SerialNumber: PH00OsT9
>usb 1-1: configuration #1 chosen from 1 choice
>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
>usb 1-1: reset full speed USB device using uhci_hcd and address 3
>lirc_dev: lirc_register_plugin: sample_rate: 0
>lirc_mceusb2[3]: Philips eHome Infrared Transceiver on usb1:3
>usbcore: registered new driver hiddev
>input: Logitech USB Receiver as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1
>input: Logitech USB Receiver as /class/input/input2
>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:0: Attached scsi removable disk sdc
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:1: Attached scsi removable disk sdd
>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
>sd 2:0:0:1: Attached scsi generic sg3 type 0
>ivtv0: did you put the firmware in the hotplug firmware directory?
>ivtv0 warning: failed loading encoder firmware
>ivtv0 warning: Error loading firmware -3!
>ivtv0: Error -3 initializing firmware.
>  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Trying to free already-free IRQ 217
>ivtv0: Error -12 on initialization
>ivtv: probe of 0000:03:09.0 failed with error -12
>ivtv:  ====================  END INIT IVTV  ====================
>sd 2:0:0:2: Attached scsi removable disk sde
>sd 2:0:0:2: Attached scsi generic sg4 type 0
>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
>  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:3: Attached scsi removable disk sdf
>sd 2:0:0:3: Attached scsi generic sg5 type 0
>usb-storage: device scan complete
>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
>ivtv0: did you put the firmware in the hotplug firmware directory?
>ivtv0 warning: failed loading encoder firmware
>ivtv0 warning: Error loading firmware -3!
>ivtv0: Error -3 initializing firmware.
>Trying to free already-free IRQ 193
>ivtv0: Error -12 on initialization
>ivtv: probe of 0000:03:08.0 failed with error -12
>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
>ivtv0: did you put the firmware in the hotplug firmware directory?
>ivtv0 warning: failed loading encoder firmware
>ivtv0 warning: Error loading firmware -3!
>ivtv0: Error -3 initializing firmware.
>Trying to free already-free IRQ 217
>ivtv0: Error -12 on initialization
>ivtv: probe of 0000:03:09.0 failed with error -12
>Adding 4200956k swap on /dev/sda1.  Priority:-1 extents:1 across:4200956k
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>loop: loaded (max 8 devices)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>AppArmor: AppArmor initialized
>audit(1166495129.702:2): AppArmor initialized
>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 288 bytes per conntrack
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>r8169: eth0: link up
>NET: Registered protocol family 17
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>audit(1166495147.555:3): audit_backlog_limit=256 old=64 by auid=4294967295
>audit(1166495147.967:4): audit_pid=3335 old=0 by auid=4294967295
>eth0: no IPv6 routers present
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.10.4 DST=134.76.11.100 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=12121 DF PROTO=TCP SPT=11519 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A000053C141D26714)

Actions: View

Attachments on bug 229260: 110439 | 110440 | 112812 | 113034 | 146652 | 146927 | 147389 | 157226 | 158345 | 159331 | 159332 | 159974 | 160145 | 160656 | 160699 | 161349 | 161350 | 173856 | 179005 | 179156 | 179246 | 179479 | 179480 | 179499 | 179500 | 179503 | 179556 | 179801