Attachment 112812 Details for Bug 229260

Output of "dmesg" from Knoppix 5.01

dmesg.log (text/plain), 17.25 KB, created by Benjamin McCann on 2007-01-13 01:46:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Benjamin McCann

Created: 2007-01-13 01:46:41 UTC

Size: 17.25 KB

patch

obsolete

>Linux version 2.6.17 (root@Knoppix) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #4 SMP PREEMPT Wed May 10 13:53:45 CEST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffef800 (usable)
> BIOS-e820: 000000007ffef800 - 000000007fff0000 (reserved)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f37e0
>On node 0 totalpages: 524271
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 294895 pages, LIFO batch:31
>DMI 2.2 present.
>ACPI: RSDP (v000 IntelR                                ) @ 0x000f76b0
>ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3040
>ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff30c0
>ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff7e00
>ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff7d00
>ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>Built 1 zonelists
>Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux 
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2660.524 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2074120k/2097084k available (2225k kernel code, 21716k reserved, 807k data, 324k init, 1179580k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5327.37 BogoMIPS (lpj=10654755)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000651d 00000000 00000001
>Checking 'hlt' instruction... OK.
>Checking for popad bug... OK.
>SMP alternatives: switching to UP code
>CPU0: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5320.45 BogoMIPS (lpj=10640916)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000651d 00000000 00000001
>CPU1: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>Total of 2 processors activated (10647.83 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=4000
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 729k freed
>NET: Registered protocol family 16
>EISA bus registered
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>PnPBIOS: Disabled by ACPI PNP
>SCSI subsystem initialized
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:02:02.0
>  IO window: d000-dfff
>  MEM window: dfe00000-dfefffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-efff
>  MEM window: d8000000-dfffffff
>  PREFETCH window: d0000000-d7ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
>TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1168653055.968:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered (default)
>io scheduler cfq registered
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 262144k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:d6a0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>hda: WDC WD600BB-00CAA1, ATA DISK drive
>hdb: TSSTcorpCD/DVDW SH-S162L, ATAPI CD/DVD-ROM drive
>ide1: I/O resource 0x170-0x177 not free.
>ide1: ports already in use, skipping probe
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63
>hda: cache flushes not supported
> hda: hda1 hda2
>hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>libata version 1.20 loaded.
>ata_piix 0000:00:1f.2: version 1.05
>ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
>ata: 0x1f0 IDE port busy
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFB08 irq 15
>ata1: dev 1 cfg 49:2f00 82:346b 83:7701 84:4023 85:3469 86:3401 87:4023 88:207f
>ata1: dev 1 ATA-7, max UDMA/133, 976773168 sectors: LBA48
>ata1: dev 1 configured for UDMA/133
>scsi0 : ata_piix
>  Vendor: ATA       Model: ST3500641AS       Rev: 3.AD
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1
>sd 0:0:1:0: Attached scsi disk sda
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>EISA: Probing bus 0 at eisa.0
>EISA: Detected 0 cards.
>NET: Registered protocol family 1
>NET: Registered protocol family 15
>Starting balanced_irq
>Using IPI No-Shortcut mode
>ACPI wakeup devices: 
>PCI0 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE AC97 AZAL 
>ACPI: (supports S0 S3 S4 S5)
>RAMDISK: Compressed image found at block 0
>EXT2-fs warning: checktime reached, running e2fsck is recommended
>VFS: Mounted root (ext2 filesystem).
>Failed initialization of WD-7000 SCSI card!
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfdfff000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000fe00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000fd00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>Initializing USB Mass Storage driver...
>usb 1-6: new high speed USB device using ehci_hcd and address 4
>usb 1-6: configuration #1 chosen from 1 choice
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 17
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[dffff000-dffff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
>ieee1394: sbp2: Try serialize_io=0 for better performance
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00000ae6ff46fc60]
>  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 1:0:0:0: Attached scsi removable disk sdb
>  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 1:0:0:1: Attached scsi removable disk sdc
>  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 1:0:0:2: Attached scsi removable disk sdd
>  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 1:0:0:3: Attached scsi removable disk sde
>usb-storage: device scan complete
>Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
>Unable to identify CD-ROM format.
>VFS: Can't find an ext2 filesystem on dev hda.
>FAT: invalid media value (0x00)
>VFS: Can't find a valid FAT filesystem on dev hda.
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>cloop: Initializing cloop v2.04
>cloop: loaded (max 8 devices)
>cloop: /cdrom/KNOPPIX/KNOPPIX: 31120 blocks, 65536 bytes/block, largest block is 65552 bytes.
>ISO 9660 Extensions: RRIP_1991A
>Registering unionfs 20060221-0341
>Freeing unused kernel memory: 324k freed
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Fan [FAN] (on)
>Using specific hotkey driver
>ACPI: Thermal Zone [THRM] (40 C)
>usbcore: registered new driver hiddev
>input: Logitech USB Receiver as /class/input/input0
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1
>input: Logitech USB Receiver as /class/input/input1
>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Linux agpgart interface v0.101 (c) Dave Jones
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>agpgart: Detected an Intel 945G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>r8169 Gigabit Ethernet driver 2.2LK loaded
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20
>eth0: Identified chip type is 'RTL8169s/8110s'.
>eth0: RTL8169 at 0xf8bec000, 00:16:ec:14:b5:19, IRQ 20
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hw_random: RNG not detected
>hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
>fuse init (API version 7.6)
>hw_random: RNG not detected
>device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
>Adding 4200956k swap on /dev/hda1.  Priority:-1 extents:1 across:4200956k
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>r8169: eth0: link up
>NET: Registered protocol family 17
>r8169: eth0: link up
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 229260: 110439 | 110440 | 112812 | 113034 | 146652 | 146927 | 147389 | 157226 | 158345 | 159331 | 159332 | 159974 | 160145 | 160656 | 160699 | 161349 | 161350 | 173856 | 179005 | 179156 | 179246 | 179479 | 179480 | 179499 | 179500 | 179503 | 179556 | 179801