Attachment 113034 Details for Bug 229260

Output of "dmesg" from SUSE 10.1

dmesg.log (text/plain), 28.82 KB, created by Benjamin McCann on 2007-01-15 22:42:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Benjamin McCann

Created: 2007-01-15 22:42:08 UTC

Size: 28.82 KB

patch

obsolete

>Linux version 2.6.16.27-0.6-smp (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Wed Dec 13 09:34:50 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffef800 (usable)
> BIOS-e820: 000000007ffef800 - 000000007fff0000 (reserved)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f37e0
>On node 0 totalpages: 524271
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 294895 pages, LIFO batch:31
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP (v000 IntelR                                ) @ 0x000f76b0
>ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3040
>ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff30c0
>ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff7e00
>ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff7d00
>ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>Overriding APIC driver with bigsmp
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Physflat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda2 vga=0x31a    resume=/dev/sda1  splash=silent
>bootsplash: silent mode.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 2660.529 MHz processor.
>Using tsc for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2072312k/2097084k available (1611k kernel code, 23584k reserved, 730k data, 188k init, 1179580k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5328.93 BogoMIPS (lpj=10657876)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000651d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2354k freed
> not found!
>CPU0: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>Leaving ESR disabled.
>Enabling SMP...
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5320.51 BogoMIPS (lpj=10641025)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000651d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>Total of 2 processors activated (10649.45 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Enabling SMP...
>Brought up 2 CPUs
>migration_cost=555
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfa110, last bus=3
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>Setting up standard PCI resources
>pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:02:02.0
>  IO window: d000-dfff
>  MEM window: dfe00000-dfefffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-efff
>  MEM window: d8000000-dfffffff
>  PREFETCH window: d0000000-d7ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1168900819.992:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 10240k, total 262144k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: protected mode interface info at c000:d6a0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76045 bytes,<6>...found (1280x1024, 33692 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
>TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI wakeup devices: 
>PCI0 PEX0 PEX1 PEX2 PEX3 PEX4 PEX5 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE AC97 AZAL 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 188k freed
>SCSI subsystem initialized
>libata version 1.20 loaded.
>ata_piix 0000:00:1f.2: version 1.05
>ata_pci_init_one: pci_dev class+intf: 0x10180
>ata_pci_init_one: NO_LEGACY == 0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFB00 irq 14
>ata1: dev 0 cfg 00:427a 49:2f00 82:346b 83:4b01 84:4003 85:3469 86:0a01 87:4003 88:203f 93:403b
>ata1: dev 0 ATA-5, max UDMA/100, 117231408 sectors: LBA
>ata1(0): applying bridge limits
>ata_acpi_push_id: skipping for PATA mode
>ata1: dev 1 cfg 00:85c0 49:0f00 82:0000 83:4000 84:4000 85:0000 86:0000 87:4000 88:0407 93:4101
>ata1: dev 1 ATAPI, max UDMA/33
>ata1(0): applying bridge limits
>ata_acpi_push_id: skipping for PATA mode
>ata1: dev 0 configured for UDMA/33
>ata1: dev 1 configured for UDMA/33
>pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
>pata_get_dev_handle: dev_handle: 0xdffe5dc0, parent_handle: 0xdffe8940
>pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff62600, *handle=0xdffe5dc0
>do_drive_get_GTF:   drive w/ adr=0: v: 0xdffe5b40
>pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
>pata_get_dev_handle: dev_handle: 0xdffe5dc0, parent_handle: 0xdffe8940
>pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff62600, *handle=0xdffe5dc0
>do_drive_get_GTF:   drive w/ adr=1: v: 0xdffe5ac0
>scsi0 : ata_piix
>  Vendor: ATA       Model: WDC WD600BB-00CA  Rev: 17.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata1: command 0xa0 timeout, stat 0xd0 host_stat 0x61
>ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
>pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
>pata_get_dev_handle: dev_handle: 0xdffe5dc0, parent_handle: 0xdffe8940
>pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff62600, *handle=0xdffe5dc0
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFB08 irq 15
>ata2: dev 1 cfg 00:0c5a 49:2f00 82:346b 83:7701 84:4023 85:3469 86:3401 87:4023 88:207f 93:0000
>ata2: dev 1 ATA-7, max UDMA/133, 976773168 sectors: LBA48
>ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00
>ata1: status=0x51 { DriveReady SeekComplete Error }
>ata1: error=0x84 { DriveStatusError BadCRC }
>ata_acpi_push_id: skipping for PATA mode
>ata2: dev 1 configured for UDMA/133
>scsi1 : ata_piix
>  Vendor: ATA       Model: ST3500641AS       Rev: 3.AD
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
> sdb: sdb1
>sd 1:0:1:0: Attached scsi disk sdb
>sd 1:0:1:0: Attached scsi generic sg1 type 0
>pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
>pata_get_dev_handle: dev_handle: 0xdffe5dc0, parent_handle: 0xdffe8940
>pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff62600, *handle=0xdffe5dc0
>Hotpluggable processor device is not present
>Hotpluggable processor device is not present
>ACPI: Thermal Zone [THRM] (40 C)
>ACPI: Fan [FAN] (on)
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 4200956k swap on /dev/sda1.  Priority:-1 extents:1 across:4200956k
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>Linux video capture interface: v1.00
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=0)
>r8169 Gigabit Ethernet driver 2.2LK loaded
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 201
>ieee1394: Initialized config rom entry `ip1394'
>eth0: Identified chip type is 'RTL8169s/8110s'.
>eth0: RTL8169 at 0xf979c000, 00:16:ec:14:b5:19, IRQ 201
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>Linux agpgart interface v0.101 (c) Dave Jones
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000ff00
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16.27-0.6-smp uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000fe00
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16.27-0.6-smp uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
>ivtv: module not supported by Novell, setting U taint flag.
>ivtv:  ==================== START INIT IVTV ====================
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000fd00
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16.27-0.6-smp uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ivtv:  version 0.7.0 (development snapshot compiled on Tue Jul 18 02:37:25 2006) loading
>ivtv:  Linux version: 2.6.16.21-0.13-smp SMP 586 REGPARM gcc-4.1
>ivtv:  In case of problems please include the debug info between
>ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
>ivtv:  any module options, when mailing the ivtv-users mailinglist.
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000fc00
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.16.27-0.6-smp uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 193
>agpgart: Detected an Intel 945G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193]  MMIO=[dffff000-dffff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 209, io mem 0xfdfff000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.16.27-0.6-smp ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 19 (level, low) -> IRQ 193
>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
>tveeprom 1-0050: Hauppauge model 23552, rev D492, serial# 8006143
>tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
>tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
>tveeprom 1-0050: audio processor is CX25843 (idx 37)
>tveeprom 1-0050: decoder processor is CX25843 (idx 30)
>tveeprom 1-0050: has radio, has no IR remote
>ivtv0: This is the first unit of a PVR500
>tuner 1-0060: TEA5767 detected.
>tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
>tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
>cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>cx25840 1-0044: unable to open firmware v4l-cx25840.fw
>wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
>usb 5-6: new high speed USB device using ehci_hcd and address 4
>hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2097: autoconfig: line_outs=4 (0x14/0x17/0x16/0x15/0x0)
>ALSA sound/pci/hda/hda_codec.c:2101:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2103:    hp=0x0, dig_out=0x1e, din_in=0x0
>ALSA sound/pci/hda/hda_codec.c:2111:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x1c
>usb 5-6: new device found, idVendor=058f, idProduct=6362
>usb 5-6: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-6: Product: Mass Storage Device
>usb 5-6: Manufacturer: Generic
>usb 5-6: SerialNumber: 058F312D81B
>usb 5-6: configuration #1 chosen from 1 choice
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00000ae6ff46fc60]
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Initializing USB Mass Storage driver...
>usb 1-1: new full speed USB device using uhci_hcd and address 3
>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
>ivtv0: did you put the firmware in the hotplug firmware directory?
>ivtv0 warning: failed loading encoder firmware
>ivtv0 warning: Error loading firmware -3!
>ivtv0: Error -3 initializing firmware.
>ivtv0: Error -12 on initialization
>ivtv: probe of 0000:03:08.0 failed with error -12
>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
>ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 20 (level, low) -> IRQ 201
>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>usb 1-1: new device found, idVendor=0471, idProduct=0815
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: eHome Infrared Transceiver
>usb 1-1: Manufacturer: Philips
>usb 1-1: SerialNumber: PH00OsT9
>usb 1-1: configuration #1 chosen from 1 choice
>tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
>cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>cx25840 1-0044: unable to open firmware v4l-cx25840.fw
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
>tveeprom 1-0050: Hauppauge model 23552, rev D492, serial# 8006143
>tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
>tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
>tveeprom 1-0050: audio processor is CX25843 (idx 37)
>tveeprom 1-0050: decoder processor is CX25843 (idx 30)
>tveeprom 1-0050: has radio, has no IR remote
>ivtv0: This is the second unit of a PVR500
>ivtv0: Correcting tveeprom data: no radio present on second unit
>usb 2-1: new device found, idVendor=046d, idProduct=c517
>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB Receiver
>usb 2-1: Manufacturer: Logitech
>usb 2-1: configuration #1 chosen from 1 choice
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new driver hiddev
>input: Logitech USB Receiver as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1
>input: Logitech USB Receiver as /class/input/input2
>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>lirc_dev: module not supported by Novell, setting U taint flag.
>lirc_dev: IR Remote Control driver registered, at major 61 
>lirc_mceusb2: module not supported by Novell, setting U taint flag.
>
>lirc_mceusb2: USB remote driver for LIRC v0.22
>lirc_mceusb2: Martin Blatter <martin_a_blatter@yahoo.com>
>usb 1-1: reset full speed USB device using uhci_hcd and address 3
>lirc_dev: lirc_register_plugin: sample_rate: 0
>lirc_mceusb2[3]: Philips eHome Infrared Transceiver on usb1:3
>usbcore: registered new driver lirc_mceusb2
>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
>ivtv0: did you put the firmware in the hotplug firmware directory?
>ivtv0 warning: failed loading encoder firmware
>ivtv0 warning: Error loading firmware -3!
>ivtv0: Error -3 initializing firmware.
>ivtv0: Error -12 on initialization
>ivtv: probe of 0000:03:09.0 failed with error -12
>ivtv:  ====================  END INIT IVTV  ====================
>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
>ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 20 (level, low) -> IRQ 201
>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
>cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>cx25840 1-0044: unable to open firmware v4l-cx25840.fw
>wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
>tveeprom 1-0050: Hauppauge model 23552, rev D492, serial# 8006143
>tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
>tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
>tveeprom 1-0050: audio processor is CX25843 (idx 37)
>tveeprom 1-0050: decoder processor is CX25843 (idx 30)
>tveeprom 1-0050: has radio, has no IR remote
>ivtv0: This is the second unit of a PVR500
>ivtv0: Correcting tveeprom data: no radio present on second unit
>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
>ivtv0: did you put the firmware in the hotplug firmware directory?
>ivtv0 warning: failed loading encoder firmware
>ivtv0 warning: Error loading firmware -3!
>ivtv0: Error -3 initializing firmware.
>ivtv0: Error -12 on initialization
>ivtv: probe of 0000:03:09.0 failed with error -12
>ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 19 (level, low) -> IRQ 193
>tuner 1-0060: TEA5767 detected.
>tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
>tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
>cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>cx25840 1-0044: unable to open firmware v4l-cx25840.fw
>wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
>tveeprom 1-0050: Hauppauge model 23552, rev D492, serial# 8006143
>tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
>tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
>tveeprom 1-0050: audio processor is CX25843 (idx 37)
>tveeprom 1-0050: decoder processor is CX25843 (idx 30)
>tveeprom 1-0050: has radio, has no IR remote
>ivtv0: This is the first unit of a PVR500
>ivtv0: unable to open firmware v4l-cx2341x-enc.fw
>ivtv0: did you put the firmware in the hotplug firmware directory?
>ivtv0 warning: failed loading encoder firmware
>ivtv0 warning: Error loading firmware -3!
>ivtv0: Error -3 initializing firmware.
>ivtv0: Error -12 on initialization
>ivtv: probe of 0000:03:08.0 failed with error -12
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hw_random: RNG not detected
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>loop: loaded (max 8 devices)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:0: Attached scsi removable disk sdc
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:1: Attached scsi removable disk sdd
>sd 2:0:0:1: Attached scsi generic sg3 type 0
>  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:2: Attached scsi removable disk sde
>sd 2:0:0:2: Attached scsi generic sg4 type 0
>  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:3: Attached scsi removable disk sdf
>sd 2:0:0:3: Attached scsi generic sg5 type 0
>usb-storage: device scan complete
>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
>audit(1168900843.861:2): AppArmor (version 2.0-19.43r6320) initialized
>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>r8169: eth0: link up
>NET: Registered protocol family 17
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>IA-32 Microcode Update Driver v1.14 unregistered
>powernow: This module only works with AMD K7 CPUs
>eth0: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.4 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.4 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.4 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88

Actions: View

Attachments on bug 229260: 110439 | 110440 | 112812 | 113034 | 146652 | 146927 | 147389 | 157226 | 158345 | 159331 | 159332 | 159974 | 160145 | 160656 | 160699 | 161349 | 161350 | 173856 | 179005 | 179156 | 179246 | 179479 | 179480 | 179499 | 179500 | 179503 | 179556 | 179801