Attachment 147483 Details for Bug 278533

Boot logs after applying pio-inquire-horkage patch

pio-inquire-horkage_boot.msg (text/plain), 28.50 KB, created by Forgotten User 9WJQF5tTlz on 2007-06-20 21:27:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Forgotten User 9WJQF5tTlz

Created: 2007-06-20 21:27:49 UTC

Size: 28.50 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.22-rc5-default
>Loaded 25233 symbols from /boot/System.map-2.6.22-rc5-default.
>Symbols match kernel version 2.6.22.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.22-rc5-default (root@vaio) (gcc version 4.1.3 20070430 (prerelease) (SUSE Linux)) #1 SMP Mon Jun 18 14:41:27 EDT 2007
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000001df70000 (usable)
><4> BIOS-e820: 000000001df70000 - 000000001df7c000 (ACPI data)
><4> BIOS-e820: 000000001df7c000 - 000000001df80000 (ACPI NVS)
><4> BIOS-e820: 000000001df80000 - 000000001e000000 (reserved)
><4> BIOS-e820: 000000002df80000 - 000000002e000000 (reserved)
><4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
><5>0MB HIGHMEM available.
><5>479MB LOWMEM available.
><7>Entering add_active_range(0, 0, 122736) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  Normal       4096 ->   122736
><4>  HighMem    122736 ->   122736
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->   122736
><7>On node 0 totalpages: 122736
><7>  DMA zone: 32 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 4064 pages, LIFO batch:0
><7>  Normal zone: 926 pages used for memmap
><7>  Normal zone: 117714 pages, LIFO batch:31
><7>  HighMem zone: 0 pages used for memmap
><6>DMI present.
><6>Using APIC driver default
><4>ACPI: RSDP 000F6FE0, 0014 (r0 PTLTD )
><4>ACPI: RSDT 1DF7750E, 002C (r1 SONY   K7        6040000  LTP        0)
><4>ACPI: FACP 1DF7BF64, 0074 (r1 SONY   K7        6040000 PTL     F4240)
><4>ACPI: DSDT 1DF7753A, 4A2A (r1  SONY  K7        6040000 MSFT  100000E)
><4>ACPI: FACS 1DF7CFC0, 0040
><4>ACPI: BOOT 1DF7BFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
><6>ATI board detected. Disabling timer routing over 8254.
><6>ACPI: PM-Timer IO Port: 0x8008
><4>Allocating PCI resources starting at 30000000 (gap: 2e000000:d1f80000)
><4>Built 1 zonelists.  Total pages: 121778
><5>Kernel command line: root=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 vga=0x317 resume=/dev/hda5 splash=verbose
><6>Local APIC disabled by BIOS -- you can enable it with "lapic"
><7>mapped APIC to ffffd000 (013cd000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 2048 (order: 11, 8192 bytes)
><4>Detected 2658.251 MHz processor.
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
><4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
><6>Memory: 476696k/490944k available (1731k kernel code, 13732k reserved, 728k data, 204k init, 0k highmem)
><4>virtual kernel memory layout:
><4>    fixmap  : 0xffe15000 - 0xfffff000   (1960 kB)
><4>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
><4>    vmalloc : 0xde800000 - 0xff7fe000   ( 527 MB)
><4>    lowmem  : 0xc0000000 - 0xddf70000   ( 479 MB)
><4>      .init : 0xc036e000 - 0xc03a1000   ( 204 kB)
><4>      .data : 0xc02b0ec3 - 0xc0367244   ( 728 kB)
><4>      .text : 0xc0100000 - 0xc02b0ec3   (1731 kB)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 5320.34 BogoMIPS (lpj=10640693)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
><6>CPU: Trace cache: 12K uops, L1 D cache: 8K
><6>CPU: L2 cache: 512K
><6>CPU: Hyper-Threading is disabled
><7>CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080 00004400 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
><6>CPU0: Thermal monitoring enabled
><4>Compat vDSO mapped to ffffe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 12k freed
><6>ACPI: Core revision 20070126
><4>ACPI: setting ELCR to 0200 (from 0c00)
><4>CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
><5>SMP motherboard not detected.
><5>Local APIC not detected. Using dummy APIC emulation.
><6>Brought up 1 CPUs
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=1
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using PIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><4>PCI quirk: region 8000-803f claimed by ali7101 ACPI
><4>PCI quirk: region 8040-805f claimed by ali7101 SMB
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT]
><4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 *11)
><4>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 *11)
><4>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 *10 11)
><4>ACPI: PCI Interrupt Link [LNK5] (IRQs 10) *11
><4>ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 7 10 *11)
><4>ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 7 10 *11)
><4>ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 11) *0, disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 11 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PnPBIOS: Disabled by ACPI PNP
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>ACPI: RTC can wake from S4
><6>pnp: 00:05: ioport range 0x40b-0x40b has been reserved
><6>pnp: 00:05: ioport range 0x480-0x48f has been reserved
><6>pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
><6>pnp: 00:05: ioport range 0x4d6-0x4d6 has been reserved
><6>pnp: 00:05: ioport range 0x8000-0x807f could not be reserved
><6>pnp: 00:06: iomem range 0x0-0x9ffff could not be reserved
><6>pnp: 00:06: iomem range 0xdc000-0xdffff has been reserved
><6>pnp: 00:06: iomem range 0xe0000-0xfffff could not be reserved
><6>pnp: 00:06: iomem range 0x100000-0x1dffffff could not be reserved
><6>Time: tsc clocksource has been installed.
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: a000-afff
><6>  MEM window: f0500000-f05fffff
><6>  PREFETCH window: f8000000-fbffffff
><4>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
><4>  IO window: 00001000-000010ff
><4>  IO window: 00001400-000014ff
><4>  PREFETCH window: 30000000-33ffffff
><4>  MEM window: 34000000-37ffffff
><4>PCI: Bus 6, cardbus bridge: 0000:00:0a.1
><4>  IO window: 00001800-000018ff
><4>  IO window: 00001c00-00001cff
><4>  PREFETCH window: 38000000-3bffffff
><4>  MEM window: 3c000000-3fffffff
><4>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
><7>PCI: setting IRQ 11 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
><4>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
><7>PCI: setting IRQ 10 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
><4>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
><4>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
><6>TCP: Hash tables configured (established 16384 bind 16384)
><6>TCP reno registered
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 6388k freed
><6>Simple Boot Flag at 0x35 set to 0x1
><6>Machine check exception polling timer started.
><6>audit: initializing netlink socket (disabled)
><5>audit(1182359494.508:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>Activating ISA DMA hang workarounds.
><7>Boot video device is 0000:01:05.0
><6>vesafb: framebuffer at 0xf8000000, mapped to 0xde880000, using 3072k, total 32704k
><6>vesafb: mode is 1024x768x16, linelength=2048, pages=20
><6>vesafb: protected mode interface info at c000:51eb
><6>vesafb: pmi: set display start = c00c527f, set palette = c00c52cb
><6>vesafb: pmi: ports = a010 a016 a054 a038 a03c a05c a000 a004 a0b0 a0b2 a0b4 
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><4>Console: switching to colour frame buffer device 128x48
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><4>ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 11
><6>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNK6] -> GSI 11 (level, low) -> IRQ 11
><6>0000:00:03.0: ttyS0 at I/O 0x8428 (irq = 11) is a 8250
><6>0000:00:03.0: ttyS1 at I/O 0x8440 (irq = 11) is a 8250
><6>0000:00:03.0: ttyS2 at I/O 0x8450 (irq = 11) is a 8250
><6>0000:00:03.0: ttyS3 at I/O 0x8460 (irq = 11) is a 8250
><4>Couldn't register serial port 0000:00:03.0: -28
><6>Floppy drive(s): fd0 is 1.44M
><4>floppy0: no floppy controllers found
><6>input: Macintosh mouse button emulation as /class/input/input0
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input1
><6>input: PC Speaker as /class/input/input2
><6>input: PS/2 Mouse as /class/input/input3
><6>input: AlpsPS/2 ALPS GlidePoint as /class/input/input4
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 204k freed
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><5>SCSI subsystem initialized
><6>ACPI: CPU0 (power states: C1[C1] C2[C2])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><6>ACPI: Thermal Zone [TZ01] (53 C)
><7>libata version 2.21 loaded.
><4>ACPI: Unable to derive IRQ for device 0000:00:0f.0
><4>ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
><6>scsi0 : pata_ali
><6>scsi1 : pata_ali
><6>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000180c0 irq 14
><6>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000180c8 irq 15
><4>Marking TSC unstable due to: possible TSC halt in C2.
><6>Time: acpi_pm clocksource has been installed.
><6>ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
><6>ata1.00: ATA-5: HITACHI_DK23EA-40, 00K3A0A3, max UDMA/100
><6>ata1.00: 78140160 sectors, multi 16: LBA 
><6>ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
><6>ata1.00: configured for UDMA/100
><6>ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-241, VS03, max UDMA/33
><6>ata2.00: configured for UDMA/33
><5>scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23EA-4 00K3 PQ: 0 ANSI: 5
><5>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><5>scsi 1:0:0:0: CD-ROM            QSI      CDRW/DVD SBW-241 VS03 PQ: 0 ANSI: 5
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>scsi 1:0:0:0: Attached scsi generic sg1 type 5
><4>sr0: scsi3-mmc drive: 17x/24x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 1:0:0:0: Attached scsi CD-ROM sr0
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda6, internal journal
><6>EXT3-fs: mounted filesystem with journal data mode.
><6>parport_pc 00:09: reported by Plug and Play ACPI
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><6>lp0: using parport0 (interrupt-driven).
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>Yenta: CardBus bridge found at 0000:00:0a.0 [104d:8158]
><6>8139too Fast Ethernet driver 0.9.28
><6>alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
><6>alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
><6>Yenta: ISA IRQ mask 0x0428, PCI irq 11
><6>Socket status: 30000820
><6>Yenta: CardBus bridge found at 0000:00:0a.1 [104d:8158]
><6>USB Universal Host Controller Interface driver v3.0
><6>Yenta: ISA IRQ mask 0x0028, PCI irq 10
><6>Socket status: 30000006
><6>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
><6>uhci_hcd 0000:00:0c.0: UHCI Host Controller
><6>uhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:0c.0: irq 11, io base 0x00008080
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:0c.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
><6>uhci_hcd 0000:00:0c.1: UHCI Host Controller
><6>uhci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:0c.1: irq 10, io base 0x000080a0
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><4>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
><6>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
><6>eth0: RealTek RTL8139 at 0xdec94c00, 08:00:46:a6:50:ca, IRQ 11
><7>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
><4>rtc_cmos: probe of 00:02 failed with error -16
><5>pccard: CardBus card inserted into slot 0
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><4>ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10
><6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[f0404000-f04047ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
><6>agpgart: Detected Ati IGP345M chipset
><6>agpgart: AGP aperture is 64M @ 0xf4000000
><6>ACPI: PCI Interrupt 0000:00:0c.2[C] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10
><6>ehci_hcd 0000:00:0c.2: EHCI Host Controller
><6>ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 3
><6>ehci_hcd 0000:00:0c.2: irq 10, io mem 0xf0404800
><6>ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 4 ports detected
><6>alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
><6>alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
><6>usb 1-1: new low speed USB device using uhci_hcd and address 2
><6>usb 1-1: configuration #1 chosen from 1 choice
><4>ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11
><6>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[08004603016647e3]
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f8-0x3ff
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>usbcore: registered new interface driver hiddev
><6>input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /class/input/input5
><6>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:0c.0-1
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><4>ALSA sound/pci/ac97/ac97_codec.c:2046: AC'97 1 does not respond - RESET
><3>ALSA sound/pci/ac97/ac97_codec.c:2055: AC'97 1 access is not valid [0xffffffff], removing mixer.
><3>ALSA sound/pci/ali5451/ali5451.c:1936: ali mixer 1 creating error.
><4>fuse init (API version 7.8)
><6>Adding 1052216k swap on /dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part5.  Priority:-1 extents:1 across:1052216k
><6>md: Autodetecting RAID arrays.
><6>md: autorun ...
><6>md: ... autorun DONE.
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda7, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>NTFS driver 2.1.28 [Flags: R/W MODULE].
><6>NTFS volume version 3.1.
><3>NTFS-fs warning (device sda2): load_system_files(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
><3>NTFS-fs warning (device sda2): load_system_files(): Windows is hibernated.  Will not be able to remount read-write.  Run chkdsk.
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Wed Jun 20 17:11:38 2007
>
>Trying manual resume from /dev/hda5
>Creating device nodes with udev
>Loading ide-core
>Loading ide-disk
>Loading scsi_mod
>Loading sd_mod
>Loading processor
>Loading thermal
>Loading libata
>Loading pata_ali
>Loading alim15x3
>Loading fan
>Loading edd
>Loading jbd
>Loading mbcache
>Loading ext3
>resume device /dev/hda5 not found (ignoring)
>Waiting for device /dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 to appear:  ok
>showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
>fsck 1.40-WIP (14-Nov-2006)
>[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 
>suse_10.3 (/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6): Clearing orphaned inode 181131 (uid=0, gid=0, mode=0100600, size=217016)
>suse_10.3 (/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6): Superblock last write time is in the future.  FIXED.
>suse_10.3 (/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6): clean, 230649/1158720 files, 2041038/2315368 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6
>
>Boot logging started on /dev/tty1(/dev/console) at Wed Jun 20 17:12:16 2007
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Loading AppArmor module failed
><notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ SPLASH=no splash=verbose ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>Starting D-Bus daemondone
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ SPLASH=no splash=verbose ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Initializing random number generatordone
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Starting resource managerdone
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/sbin/acpid ]
>acpid: loading ACPI modules ( ac battery button ) done
>acpid: will not skip unsupported modules
>acpid: loading ACPI laptop modules ( dock ) failed
>Starting acpid done
><notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ]
>Loading keymap i386/qwerty/us.map.gz
>doneLoading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneStarting PolicyKit daemondone
><notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>Starting HAL daemondone
>Loading CPUFreq modules (CPUFreq not supported)
><notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ]
><notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
><notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
>Starting the DHCP DBUS Daemondone
>Starting the NetworkManagerDispatcherdone
>Starting the NetworkManagerdone
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/sbin/portmap ]
>Starting RPC portmap daemondone
>Importing Net File System (NFS)unused
>Starting nfsboot (sm-notify) done
>Mount CIFS File Systems unused
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
>Starting cupsddone
>Starting irqbalance unused
>Starting hotkey-setup done
>Starting up sensors: failed
>Checking/updating CPU microcode done
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting Name Service Cache Daemondone
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>Starting powersaved: done
><notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
>Starting SMPPPDdone
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting SSH daemondone
><notice>startproc: execve (/usr/sbin/gdm) [ /usr/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=en_US.UTF-8 PREVLEVEL=N LINES=48 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=Industrial WINDOWMANAGER= splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/sbin/gdm ]
>Starting mail service (Postfix)i!
>done
>Starting service gdmdone
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/disk/by-id/ata-HITACHI_DK23EA-40_BM6935-part6 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>Starting CRON daemondone
>done
>Starting Firewall Initialization (phase 2 of 2) FATAL: Error inserting ip6table_mangle (/lib/modules/2.6.22-rc5-default/kernel/net/ipv6/netfilter/ip6table_mangle.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>done
>Master Resource Control: runlevel 5 has been reached
>Failed services in runlevel 5: acpid boot.apparmor lm_sensors
>Skipped services in runlevel 5: nfs smbfs irq_balancer splash
><notice>killproc: kill(2391,3)

Actions: View

Attachments on bug 278533: 145201 | 145362 | 145363 | 145779 | 145985 | 146256 | 146392 | 146692 | 147306 | 147483 | 147484 | 147515 | 150145 | 150327 | 150401 | 150596 | 156739 | 156868 | 173973 | 179366 | 184967 | 186964 | 187272