Attachment 156981 Details for Bug 299690

Output of Knoppix 5.1.1 dmesg command

dmesg-knoppix5.1.1.txt (text/plain), 19.44 KB, created by Jacek Glinkowski on 2007-08-13 02:54:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jacek Glinkowski

Created: 2007-08-13 02:54:05 UTC

Size: 19.44 KB

patch

obsolete

>root@Knoppix:/etc# dmesg
>Linux version 2.6.19 (root@Knoppix) (gcc version 4.1.2 20061028 (prerelease) (Debian 4.1.1-19)) #7 SMP PREEMPT Sun Dec 17 22:01:07 CET 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
> BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
> BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
> BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
>Warning only 4GB will be used.
>Use a PAE enabled kernel.
>3200MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f4ff0
>Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->  1048576
>early_node_map[1] active PFN ranges
>    0:        0 ->  1048576
>On node 0 totalpages: 1048576
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 6400 pages used for memmap
>  HighMem zone: 812800 pages, LIFO batch:31
>DMI 2.4 present.
>ACPI: RSDP (v000 GBT                                   ) @ 0x000f6990
>ACPI: RSDT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0xcfee3000
>ACPI: FADT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0xcfee3040
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0xcfee7840
>ACPI: HPET (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x00000098) @ 0xcfee7a80
>ACPI: MCFG (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0xcfee7ac0
>ACPI: MADT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0xcfee77c0
>ACPI: DSDT (v001 GBT    GBTUACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
>Detected 2104.847 MHz processor.
>Built 1 zonelists.  Total pages: 1040384
>Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce loglevel=0 quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3366228k/4194304k available (2747k kernel code, 39276k reserved, 958k data, 336k init, 2489216k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc04a6000 - 0xc04fa000   ( 336 kB)
>      .data : 0xc03aef9c - 0xc049e7b4   ( 958 kB)
>      .text : 0xc0100000 - 0xc03aef9c   (2747 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 4212.77 BogoMIPS (lpj=8425543)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>Checking for popad bug... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor BE-2350 stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4209.61 BogoMIPS (lpj=8419229)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
>MTRR: CPU 1: Writing MSR 250 to 1e1e1e1e:1e1e1e1e failed
>MTRR: CPU 1: Writing MSR 258 to 1e1e1e1e:1e1e1e1e failed
>MTRR: CPU 1: Writing MSR 268 to 15151515:15151515 failed
>MTRR: CPU 1: Writing MSR 269 to 10101010:10101010 failed
>MTRR: CPU 1: Writing MSR 26c to 10101010:10101010 failed
>MTRR: CPU 1: Writing MSR 26d to 10101010:10101010 failed
>MTRR: CPU 1: Writing MSR 26e to 10101010:10101010 failed
>MTRR: CPU 1: Writing MSR 26f to 10101010:10101010 failed
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor BE-2350 stepping 01
>Total of 2 processors activated (8422.38 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs:
>CPU#0 had -51 usecs TSC skew, fixed it up.
>CPU#1 had 51 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>migration_cost=156
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 1188k freed
>NET: Registered protocol family 16
>EISA bus registered
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: No mmconfig possible on 0:18
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>PnPBIOS: Disabled by ACPI PNP
>SCSI subsystem initialized
>libata version 2.00 loaded.
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x4100-0x411f has been reserved
>pnp: 00:01: ioport range 0x228-0x22f has been reserved
>pnp: 00:01: ioport range 0x40b-0x40b has been reserved
>pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:01: ioport range 0xc00-0xc01 has been reserved
>pnp: 00:01: ioport range 0xc14-0xc14 has been reserved
>pnp: 00:01: ioport range 0xc50-0xc52 has been reserved
>pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: fde00000-fdffffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: d000-dfff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fdc00000-fdcfffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1186968388.628:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>fuse init (API version 7.8)
>fuse distribution version: 2.6.1
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered (default)
>io scheduler cfq registered
>vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 3072k, total 16384k
>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>vesafb: protected mode interface info at c000:a0e2
>vesafb: pmi: set display start = c00ca16c, set palette = c00ca22a
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf900-0xf907, BIOS settings: hda:pio, hdb:pio
>ATIIXP: simplex device: DMA disabled
>ide1: ATIIXP Bus-Master DMA disabled (BIOS)
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>Loading iSCSI transport class v2.0-724.<7>ahci 0000:00:12.0: version 2.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part
>ata1: SATA max UDMA/133 cmd 0xF8820100 ctl 0x0 bmdma 0x0 irq 17
>ata2: SATA max UDMA/133 cmd 0xF8820180 ctl 0x0 bmdma 0x0 irq 17
>ata3: SATA max UDMA/133 cmd 0xF8820200 ctl 0x0 bmdma 0x0 irq 17
>ata4: SATA max UDMA/133 cmd 0xF8820280 ctl 0x0 bmdma 0x0 irq 17
>scsi0 : ahci
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 781420655 sectors: LBA48 NCQ (depth 31/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi2 : ahci
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI, max UDMA/66
>ata3.00: configured for UDMA/66
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
>SCSI device sda: 781420655 512-byte hdwr sectors (400087 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 781420655 512-byte hdwr sectors (400087 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>scsi 2:0:0:0: CD-ROM            ASUS     DRW-1814BLT      1.04 PQ: 0 ANSI: 5
>ata3.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
>ata3.00: (irq_stat 0x40000001)
>ata3.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x60 (internal error)
>ata3: soft resetting port
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: configured for UDMA/66
>ata3: EH complete
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>EISA: Probing bus 0 at eisa.0
>Cannot allocate resource for EISA slot 4
>EISA: Detected 0 cards.
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 15
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Time: hpet clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>RAMDISK: Compressed image found at block 0
>EXT2-fs warning: checktime reached, running e2fsck is recommended
>VFS: Mounted root (ext2 filesystem).
>Failed initialization of WD-7000 SCSI card!
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 18
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 18, io mem 0xfe029000
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 20
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 20, io mem 0xfe02c000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 19, io mem 0xfe02b000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 20
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 20, io mem 0xfe02a000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 4-1: new low speed USB device using ohci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>input: Logitech USB Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:13.2-1
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 22 (level, low) -> IRQ 17
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fddff000-fddff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
>ieee1394: sbp2: Try serialize_io=0 for better performance
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001a4d0000e89192]
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>cloop: Initializing cloop v2.05
>cloop: loaded (max 8 devices)
>cloop: /cdrom/KNOPPIX/KNOPPIX: 15609 blocks, 131072 bytes/block, largest block is 131098 bytes.
>cloop: loaded 256 blocks into cache.
>ISO 9660 Extensions: RRIP_1991A
>aufs 2.6.19-20061211
>Freeing unused kernel memory: 336k freed
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>Using specific hotkey driver
>cpufreq: No nForce2 chipset.
>powernow: This module only works with AMD K7 CPUs
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor BE-2350 processors (version 2.00.00)
>powernow-k8:    0 : fid 0xd (2100 MHz), vid 0xc
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xd
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xf
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 2:0:0:0: Attached scsi generic sg1 type 5
>ata3.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
>ata3.00: (irq_stat 0x40000001)
>ata3.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x54 (internal error)
>ata3: soft resetting port
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: configured for UDMA/66
>ata3: EH complete
>ata3.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
>ata3.00: (irq_stat 0x40000001)
>ata3.00: tag 0 cmd 0xa0 Emask 0x40 stat 0x51 err 0x54 (internal error)
>ata3: soft resetting port
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: configured for UDMA/66
>ata3: EH complete
>Linux agpgart interface v0.101 (c) Dave Jones
>r8169 Gigabit Ethernet driver 2.2LK loaded
>ACPI: PCI Interrupt 0000:02:0f.0[A] -> GSI 23 (level, low) -> IRQ 21
>eth1: RTL8169sc/8110sc at 0xfae3a000, 00:1a:4d:82:fa:ff, IRQ 21
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>r8169: eth1: link down
>r8169: eth1: link up
>NET: Registered protocol family 17
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
>ACPI: PCI Interrupt 0000:01:05.2[B] -> GSI 19 (level, low) -> IRQ 18
>r8169: eth1: link up
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>eth1: no IPv6 routers present
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>r8169: eth1: link up
>eth1: no IPv6 routers present
>hda-intel: Invalid position buffer, using LPIB read method instead.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>root@Knoppix:/etc#

Actions: View

Attachments on bug 299690: 156981 | 156982 | 156989 | 156990 | 156991 | 156992