Attachment 159695 Details for Bug 302422

dmesg.txt

dmesg.txt (text/plain), 25.61 KB, created by Holger Sickenberg on 2007-08-24 11:40:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Holger Sickenberg

Created: 2007-08-24 11:40:16 UTC

Size: 25.61 KB

patch

obsolete

>Linux version 2.6.22.3-7-bigsmp (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/08/20 16:50:09 UTC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f72f800 (usable)
> BIOS-e820: 000000003f72f800 - 000000003f730000 (ACPI NVS)
> BIOS-e820: 000000003f730000 - 000000003f740000 (ACPI data)
> BIOS-e820: 000000003f740000 - 000000003f7f0000 (ACPI NVS)
> BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000feda0000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Entering add_active_range(0, 0, 259887) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   259887
>early_node_map[1] active PFN ranges
>    0:        0 ->   259887
>On node 0 totalpages: 259887
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 238 pages used for memmap
>  HighMem zone: 30273 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F4EB0, 0014 (r0 ACPIAM)
>ACPI: RSDT 3F730000, 003C (r1 INTEL  D915GEV  20060222 MSFT       97)
>ACPI: FACP 3F730200, 0081 (r2 INTEL  D915GEV  20060222 MSFT       97)
>ACPI: DSDT 3F730440, 5C05 (r1 INTEL  D915GEV         1 INTL  2002026)
>ACPI: FACS 3F740000, 0040
>ACPI: APIC 3F730390, 0068 (r1 INTEL  D915GEV  20060222 MSFT       97)
>ACPI: MCFG 3F730400, 003C (r1 INTEL  D915GEV  20060222 MSFT       97)
>ACPI: ASF! 3F736050, 0099 (r16 LEGEND I865PASF        1 INTL  2002026)
>ACPI: TCPA 3F7360F0, 0032 (r1 INTEL  TBLOEMID        1 MSFT       97)
>ACPI: WDDT 3F736122, 0040 (r1 INTEL  OEMWDDT         1 INTL  2002026)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3f800000:a0800000)
>Built 1 zonelists.  Total pages: 257857
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST3120026AS_5MS0AZKW-part5 vga=0x34b resume=/dev/sda15 splash=verbose
>bootsplash: verbose mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3200.188 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1021424k/1039548k available (1821k kernel code, 17432k reserved, 900k data, 212k init, 122044k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xff8b5000 - 0xfffff000   (7464 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xf8800000 - 0xff5fe000   ( 109 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc03b0000 - 0xc03e5000   ( 212 kB)
>      .data : 0xc02c755c - 0xc03a8698   ( 900 kB)
>      .text : 0xc0100000 - 0xc02c755c   (1821 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6405.79 BogoMIPS (lpj=12811590)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Unpacking initramfs... done
>Freeing initrd memory: 4913k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 875 Objects with 58 Devices 233 Methods 36 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6400.45 BogoMIPS (lpj=12800910)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
>Total of 2 processors activated (12806.25 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>migration_cost=54
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>evgpeblk-0952 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1048 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:..............................................................................................................................................
>Initialized 35/36 Regions 33/33 Fields 51/51 Buffers 23/24 Packages (884 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:...
>Executed 3 _INI methods requiring 0 _STA executions (examined 62 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: Power Resource [URP2] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>ACPI: RTC can wake from S4
>pnp: 00:0c: iomem range 0xffc00000-0xfff7ffff has been reserved
>pnp: 00:0d: ioport range 0x400-0x47f has been reserved
>pnp: 00:0d: ioport range 0x680-0x6ff has been reserved
>pnp: 00:0d: ioport range 0x500-0x53f has been reserved
>pnp: 00:0d: iomem range 0xeec00000-0xeec03fff could not be reserved
>pnp: 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
>pnp: 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0f: iomem range 0xc0000-0xdffff could not be reserved
>pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0f: iomem range 0x100000-0x3f7fffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: ffa00000-ffafffff
>  PREFETCH window: cff00000-cfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: ff600000-ff6fffff
>  PREFETCH window: cfb00000-cfbfffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: a000-afff
>  MEM window: ff700000-ff7fffff
>  PREFETCH window: cfc00000-cfcfffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: ff800000-ff8fffff
>  PREFETCH window: cfd00000-cfdfffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: ff900000-ff9fffff
>  PREFETCH window: cfe00000-cfefffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: ff500000-ff5fffff
>  PREFETCH window: cfa00000-cfafffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>audit(1187955451.528:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 7872k, total 7872k
>vesafb: mode is 1600x1200x16, linelength=3200, pages=1
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 103127 bytes,<6>...found (1600x1200, 39122 bytes, v3).
>Console: switching to colour frame buffer device 196x71
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>Switched to NOHz mode on CPU #1
>Switched to NOHz mode on CPU #0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>input: PS2++ Logitech Wheel Mouse as /class/input/input2
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 212k freed
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>ata1.00: ATAPI: TSSTcorpDVD-ROM SH-D162C, TS04, max UDMA/33
>ata1.00: configured for UDMA/33
>scsi 0:0:0:0: CD-ROM            TSSTcorp DVD-ROM SH-D162C TS04 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 19
>ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 19
>ata3.00: ATA-6: ST3120026AS, 3.00, max UDMA/133
>ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata4.00: ATA-6: ST3120026AS, 3.05, max UDMA/133
>ata4.00: 234441648 sectors, multi 16: LBA48 
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      ST3120026AS      3.00 PQ: 0 ANSI: 5
>scsi 3:0:0:0: Direct-Access     ATA      ST3120026AS      3.05 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000c800
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.3-7-bigsmp uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
> sda1<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xff43bc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.22.3-7-bigsmp ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
> sda2 <<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> sda5<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.22.3-7-bigsmp uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> sda6<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.22.3-7-bigsmp uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
> sda7<7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.22.3-7-bigsmp uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
> sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>sd 3:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>usb 2-3: new high speed USB device using ehci_hcd and address 2
>sd 3:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 >
>sd 3:0:0:0: [sdb] Attached SCSI disk
>usb 2-3: new device found, idVendor=067b, idProduct=3507
>usb 2-3: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-3: Product: PL-3507C USB Storage Device
>usb 2-3: Manufacturer: Prolific
>usb 2-3: SerialNumber: 01300949
>usb 2-3: configuration #1 chosen from 1 choice
>usb 2-8: new high speed USB device using ehci_hcd and address 4
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>usb 2-8: new device found, idVendor=152e, idProduct=2507
>usb 2-8: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-8: Product: Super Multi DVD Rewriter
>usb 2-8: Manufacturer: HLDS Inc.
>usb 2-8: SerialNumber: P01051114111650
>usb 2-8: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>usb 5-1: new device found, idVendor=0a5c, idProduct=200a
>usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-1: Product: CCBT2035BDGP23-1
>usb 5-1: Manufacturer: Broadcom
>usb 5-1: SerialNumber: 000272C32BA9
>usb 5-1: configuration #1 chosen from 1 choice
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 915G Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>sky2 0000:04:00.0: v1.14 addr 0xff720000 irq 17 Yukon-EC (0xb6) rev 1
>sky2 eth0: addr 00:11:11:42:ef:b1
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
> don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
> you are certain that your <4>intel_rng: system has a functional
> RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi5 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:02 failed with error -16
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21
>tulip0:  EEPROM default media type Autosense.
>tulip0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
>scsi 4:0:0:0: Direct-Access     SAMSUNG  MP0402H          UC10 PQ: 0 ANSI: 0
>tulip0:  MII transceiver #5 config 1000 status 782d advertising 01e1.
>eth1: Digital DS21142/43 Tulip rev 65 at Port 0xbc00, 00:00:1C:B5:9E:6B, IRQ 21.
>sd 4:0:0:0: [sdc] 78242975 512-byte hardware sectors (40060 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
>sd 4:0:0:0: [sdc] Assuming drive cache: write through
>scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRRW GSA-2166D 1.01 PQ: 0 ANSI: 0
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 5:0:0:0: Attached scsi CD-ROM sr1
>sr 5:0:0:0: Attached scsi generic sg3 type 5
>usb-storage: device scan complete
>sd 4:0:0:0: [sdc] 78242975 512-byte hardware sectors (40060 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
>sd 4:0:0:0: [sdc] Assuming drive cache: write through
> sdc:<6>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
> sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 >
>sd 4:0:0:0: [sdc] Attached SCSI disk
>sd 4:0:0:0: Attached scsi generic sg4 type 0
>usb-storage: device scan complete
>Adding 1028120k swap on /dev/sda15.  Priority:-1 extents:1 across:1028120k
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>loop: module loaded
>AppArmor: AppArmor initialized
>audit(1187955463.528:2):  info="AppArmor initialized" pid=2291
>powernow: This module only works with AMD K7 CPUs
>NET: Registered protocol family 17
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>audit(1187955477.221:3): audit_pid=4163 old=0 by auid=4294967295

Actions: View

Attachments on bug 302422: 159695 | 159697