Attachment 173973 Details for Bug 278533

Boot messages.

boot.msg (text/plain), 31.32 KB, created by Forgotten User 9WJQF5tTlz on 2007-09-21 20:35:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Forgotten User 9WJQF5tTlz

Created: 2007-09-21 20:35:40 UTC

Size: 31.32 KB

patch

obsolete

><5>Linux version 2.6.22.5-23-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/18 05:23:45 UTC
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 0000000017f70000 (usable)
><4> BIOS-e820: 0000000017f70000 - 0000000017f7c000 (ACPI data)
><4> BIOS-e820: 0000000017f7c000 - 0000000017f80000 (ACPI NVS)
><4> BIOS-e820: 0000000017f80000 - 0000000018000000 (reserved)
><4> BIOS-e820: 0000000027f80000 - 0000000028000000 (reserved)
><4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
><5>0MB HIGHMEM available.
><5>383MB LOWMEM available.
><7>Entering add_active_range(0, 0, 98160) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  Normal       4096 ->    98160
><4>  HighMem     98160 ->    98160
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->    98160
><7>On node 0 totalpages: 98160
><7>  DMA zone: 32 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 4064 pages, LIFO batch:0
><7>  Normal zone: 734 pages used for memmap
><7>  Normal zone: 93330 pages, LIFO batch:31
><7>  HighMem zone: 0 pages used for memmap
><6>DMI present.
><6>Using APIC driver default
><4>ACPI: RSDP 000F6FE0, 0014 (r0 PTLTD )
><4>ACPI: RSDT 17F774D1, 002C (r1 SONY   K7        6040000  LTP        0)
><4>ACPI: FACP 17F7BF64, 0074 (r1 SONY   K7        6040000 PTL     F4240)
><4>ACPI: DSDT 17F774FD, 4A67 (r1  SONY  K7        6040000 MSFT  100000E)
><4>ACPI: FACS 17F7CFC0, 0040
><4>ACPI: BOOT 17F7BFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
><6>ATI board detected. Disabling timer routing over 8254.
><6>ACPI: PM-Timer IO Port: 0x8008
><4>Allocating PCI resources starting at 30000000 (gap: 28000000:d7f80000)
><4>Built 1 zonelists.  Total pages: 97394
><5>Kernel command line: BOOT_IMAGE=linux initrd=initrd,10240768.spl splash=silent vga=0x317 libata.pata_dma=1 splash=verbose
><6>bootsplash: silent mode.
><3>Unknown boot option `libata.pata_dma=1': ignoring
><6>bootsplash: verbose mode.
><6>Local APIC disabled by BIOS -- you can enable it with "lapic"
><7>mapped APIC to ffffd000 (0130d000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 2048 (order: 11, 8192 bytes)
><4>Detected 2658.155 MHz processor.
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
><4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
><6>Memory: 370288k/392640k available (1820k kernel code, 21660k reserved, 761k data, 228k init, 0k highmem)
><4>virtual kernel memory layout:
><4>    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)
><4>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
><4>    vmalloc : 0xd8800000 - 0xff7fe000   ( 623 MB)
><4>    lowmem  : 0xc0000000 - 0xd7f70000   ( 383 MB)
><4>      .init : 0xc038c000 - 0xc03c5000   ( 228 kB)
><4>      .data : 0xc02c725d - 0xc0385964   ( 761 kB)
><4>      .text : 0xc0100000 - 0xc02c725d   (1820 kB)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 5320.55 BogoMIPS (lpj=10641111)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
><6>CPU: Trace cache: 12K uops, L1 D cache: 8K
><6>CPU: L2 cache: 512K
><6>CPU: Hyper-Threading is disabled
><7>CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080 00004400 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
><6>CPU0: Thermal monitoring enabled
><4>Compat vDSO mapped to ffffe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 12k freed
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 14790k freed
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 557 Objects with 53 Devices 187 Methods 17 Regions
><4> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>ACPI: setting ELCR to 0200 (from 0c00)
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><4>CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
><5>SMP motherboard not detected.
><5>Local APIC not detected. Using dummy APIC emulation.
><6>Brought up 1 CPUs
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd8a0, last bus=1
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 1 Runtime GPEs in this block
><4>Completing Region/Field/Buffer/Package initialization:...............................................................
><4>Initialized 17/17 Regions 3/3 Fields 22/22 Buffers 21/29 Packages (566 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:.
><4>Executed 1 _INI methods requiring 0 _STA executions (examined 57 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using PIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><4>PCI quirk: region 8000-803f claimed by ali7101 ACPI
><4>PCI quirk: region 8040-805f claimed by ali7101 SMB
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT]
><4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 *11)
><4>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 *11)
><4>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 *10 11)
><4>ACPI: PCI Interrupt Link [LNK5] (IRQs 10) *11
><4>ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 7 10 *11)
><4>ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 7 10 *11)
><4>ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 7 10 11) *0, disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 11 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PnPBIOS: Disabled by ACPI PNP
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>ACPI: RTC can wake from S4
><6>pnp: 00:05: ioport range 0x40b-0x40b has been reserved
><6>pnp: 00:05: ioport range 0x480-0x48f has been reserved
><6>pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
><6>pnp: 00:05: ioport range 0x4d6-0x4d6 has been reserved
><6>pnp: 00:05: ioport range 0x8000-0x807f could not be reserved
><6>pnp: 00:06: iomem range 0x0-0x9ffff could not be reserved
><6>pnp: 00:06: iomem range 0xdc000-0xdffff has been reserved
><6>pnp: 00:06: iomem range 0xe0000-0xfffff could not be reserved
><6>pnp: 00:06: iomem range 0x100000-0x17ffffff could not be reserved
><6>Time: tsc clocksource has been installed.
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: a000-afff
><6>  MEM window: c0500000-c05fffff
><6>  PREFETCH window: e0000000-efffffff
><4>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
><4>  IO window: 00001000-000010ff
><4>  IO window: 00001400-000014ff
><4>  PREFETCH window: 30000000-33ffffff
><4>  MEM window: 34000000-37ffffff
><4>PCI: Bus 6, cardbus bridge: 0000:00:0a.1
><4>  IO window: 00001800-000018ff
><4>  IO window: 00001c00-00001cff
><4>  PREFETCH window: 38000000-3bffffff
><4>  MEM window: 3c000000-3fffffff
><4>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
><7>PCI: setting IRQ 11 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
><4>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
><7>PCI: setting IRQ 10 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
><4>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
><4>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
><6>TCP: Hash tables configured (established 16384 bind 16384)
><6>TCP reno registered
><6>Simple Boot Flag at 0x35 set to 0x1
><6>Machine check exception polling timer started.
><6>audit: initializing netlink socket (disabled)
><5>audit(1190375123.816:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>Activating ISA DMA hang workarounds.
><7>Boot video device is 0000:01:05.0
><6>vesafb: framebuffer at 0xe0000000, mapped to 0xd8880000, using 6144k, total 131008k
><6>vesafb: mode is 1024x768x16, linelength=2048, pages=84
><6>vesafb: protected mode interface info at c000:51eb
><6>vesafb: pmi: set display start = c00c527f, set palette = c00c52cb
><6>vesafb: pmi: ports = a010 a016 a054 a038 a03c a05c a000 a004 a0b0 a0b2 a0b4 
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 78436 bytes
><6>bootsplash: ...found (1024x768, 28133 bytes, v3).
><4>Console: switching to colour frame buffer device 124x44
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550
><4>ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 11
><6>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNK6] -> GSI 11 (level, low) -> IRQ 11
><6>0000:00:03.0: ttyS1 at I/O 0x8428 (irq = 11) is a 8250
><6>0000:00:03.0: ttyS2 at I/O 0x8440 (irq = 11) is a 8250
><6>0000:00:03.0: ttyS3 at I/O 0x8450 (irq = 11) is a 8250
><4>Couldn't register serial port 0000:00:03.0: -28
><6>Floppy drive(s): fd0 is 1.44M
><6>Switched to NOHz mode on CPU #0
><4>floppy0: no floppy controllers found
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>input: PC Speaker as /class/input/input1
><6>input: PS/2 Mouse as /class/input/input2
><6>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 228k freed
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><5>SCSI subsystem initialized
><6>st: Version 20070203, fixed bufsize 32768, s/g segs 256
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>Non-volatile memory driver v1.2
><6>NET: Registered protocol family 17
><6>loop: module loaded
><6>ACPI: CPU0 (power states: C1[C1] C2[C2])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><6>ACPI: Thermal Zone [TZ01] (56 C)
><6>powernow: This module only works with AMD K7 CPUs
><4>Marking TSC unstable due to: possible TSC halt in C2.
><6>Time: acpi_pm clocksource has been installed.
><6>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
><4>ppa: Version 2.07 (for Linux 2.4.x)
><7>libata version 3.00 loaded.
><4>ACPI: Unable to derive IRQ for device 0000:00:0f.0
><4>ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
><6>scsi0 : pata_ali
><6>scsi1 : pata_ali
><6>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000180c0 irq 14
><6>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000180c8 irq 15
><6>ata1.00: ATA-5: HITACHI_DK23EA-40, 00K3A0A3, max UDMA/100
><6>ata1.00: 78140160 sectors, multi 16: LBA 
><6>ata1.00: configured for UDMA/100
><6>ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-241, VS03, max UDMA/33
><6>ata2.00: configured for UDMA/33
><5>scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23EA-4 00K3 PQ: 0 ANSI: 5
><5>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 96 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: model number mismatch 'QSI CD-RW/DVD-ROM SBW-241' != ''
><3>ata2.00: revalidation failed (errno=-19)
><4>ata2.00: limiting speed to UDMA/33:PIO3
><4>ata2: failed to recover some devices, retrying in 5 secs
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/33
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 96 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/33
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 96 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/33
><6>ata2: EH complete
><4>ata2.00: limiting speed to UDMA/25:PIO3
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 96 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><6>scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for UDMA/25
><6>ata2: EH complete
><4>ata2.00: limiting speed to PIO3
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO3
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO3
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO3
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO3
><6>ata2: EH complete
><4>ata2.00: limiting speed to PIO2
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO2
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO2
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO2
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO2
><6>ata2: EH complete
><4>ata2.00: limiting speed to PIO0
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO0
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO0
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO0
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO0
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO0
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO0
><6>ata2: EH complete
><3>ata2: WARNING: synchronous SCSI scan failed without making any progress,
><4>                  switching to async
><6>Yenta: CardBus bridge found at 0000:00:0a.0 [104d:8158]
><6>Yenta: ISA IRQ mask 0x04a8, PCI irq 11
><6>Socket status: 30000820
><6>Yenta: CardBus bridge found at 0000:00:0a.1 [104d:8158]
><6>Yenta: ISA IRQ mask 0x00a8, PCI irq 10
><6>Socket status: 30000820
><5>pccard: CardBus card inserted into slot 0
><5>pccard: CardBus card inserted into slot 1
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO0
><6>ata2: EH complete
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: clean.
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>cs: IO port probe 0x100-0x3af: clean.
><6>cs: IO port probe 0x3e0-0x4ff: clean.
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xc00-0xcf7: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><4>ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:0c.2[C] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10
><6>ehci_hcd 0000:00:0c.2: EHCI Host Controller
><6>ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:0c.2: irq 10, io mem 0xc0404800
><6>ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: EHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.22.5-23-default ehci_hcd
><6>usb usb1: SerialNumber: 0000:00:0c.2
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 4 ports detected
><6>usb 1-1: new high speed USB device using ehci_hcd and address 2
><6>usb 1-1: new device found, idVendor=08ec, idProduct=0015
><6>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 1-1: Product: Dell Memory Key
><6>usb 1-1: Manufacturer: M-SysT5
><6>usb 1-1: SerialNumber: 0C705840D1B10980
><6>usb 1-1: configuration #1 chosen from 1 choice
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
><6>uhci_hcd 0000:00:0c.0: UHCI Host Controller
><6>uhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:0c.0: irq 11, io base 0x00008080
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.22.5-23-default uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:0c.0
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:0c.1[B] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
><6>uhci_hcd 0000:00:0c.1: UHCI Host Controller
><6>uhci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:0c.1: irq 10, io base 0x000080a0
><6>usb usb3: new device found, idVendor=0000, idProduct=0000
><6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.22.5-23-default uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:0c.1
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>Initializing USB Mass Storage driver...
><6>scsi2 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><5>scsi 2:0:0:0: Direct-Access     M-SysT5  Dell Memory Key  5.00 PQ: 0 ANSI: 0 CCS
><5>sd 2:0:0:0: [sdb] Attached SCSI removable disk
><5>sd 2:0:0:0: Attached scsi generic sg1 type 0
><7>usb-storage: device scan complete
><5>sd 2:0:0:0: [sdb] 249599 512-byte hardware sectors (128 MB)
><5>sd 2:0:0:0: [sdb] Write Protect is off
><7>sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
><3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
><5>sd 2:0:0:0: [sdb] 249599 512-byte hardware sectors (128 MB)
><5>sd 2:0:0:0: [sdb] Write Protect is off
><7>sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
><3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
><6> sdb: sdb1
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO0
><6>ata2: EH complete
><3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
><6>ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10
><6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[c0404000-c04047ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[08004603016647e3]
><4>ata2: port is slow to respond, please be patient (Status 0xd0)
><4>ata2: device not ready (errno=-16), forcing hardreset
><6>ata2: soft resetting link
><6>ata2.00: configured for PIO0
><6>ata2: EH complete
><6>8139too Fast Ethernet driver 0.9.28
><4>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
><6>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
><6>eth0: RealTek RTL8139 at 0xd90eac00, 08:00:46:a6:50:ca, IRQ 11
><7>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
><4>PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
><6>ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:06:00.0 to 64
><6>eth1: RealTek RTL8139 at 0xd90f8000, 00:40:05:3c:c5:8b, IRQ 10
><7>eth1:  Identified 8139 chip type 'RTL-8139C'

Actions: View

Attachments on bug 278533: 145201 | 145362 | 145363 | 145779 | 145985 | 146256 | 146392 | 146692 | 147306 | 147483 | 147484 | 147515 | 150145 | 150327 | 150401 | 150596 | 156739 | 156868 | 173973 | 179366 | 184967 | 186964 | 187272