Attachment 179480 Details for Bug 229260

/var/log/boot.msg from ATAPI transfer length fix

boot.msg (text/plain), 46.54 KB, created by Benjamin McCann on 2007-10-19 15:44:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Benjamin McCann

Created: 2007-10-19 15:44:05 UTC

Size: 46.54 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.22.9-0.4-atapi-trans-len
>Loaded 26661 symbols from /boot/System.map-2.6.22.9-0.4-atapi-trans-len.
>Symbols match kernel version 2.6.22.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.22.9-0.4-atapi-trans-len (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP Fri Oct 19 10:10:16 EDT 2007
><6>Command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 vga=0x31a resume=/dev/sda1 splash=silent
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
><4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000007ffef800 (usable)
><4> BIOS-e820: 000000007ffef800 - 000000007fff0000 (reserved)
><4> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
><4> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
><4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 524271) 1 entries of 3200 used
><4>end_pfn_map = 1048576
><6>DMI 2.2 present.
><4>ACPI: RSDP 000F76B0, 0014 (r0 IntelR)
><4>ACPI: RSDT 7FFF3040, 0030 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
><4>ACPI: FACP 7FFF30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
><4>ACPI: DSDT 7FFF3180, 4B36 (r1 INTELR AWRDACPI     1000 MSFT  100000E)
><4>ACPI: FACS 7FFF0000, 0040
><4>ACPI: MCFG 7FFF7E00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
><4>ACPI: APIC 7FFF7D00, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000007ffef000
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 524271) 1 entries of 3200 used
><6>Bootmem setup node 0 0000000000000000-000000007ffef000
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1048576
><4>early_node_map[2] active PFN ranges
><4>    0:        0 ->      159
><4>    0:      256 ->   524271
><7>On node 0 totalpages: 524174
><7>  DMA zone: 56 pages used for memmap
><7>  DMA zone: 1271 pages reserved
><7>  DMA zone: 2672 pages, LIFO batch:0
><7>  DMA32 zone: 7111 pages used for memmap
><7>  DMA32 zone: 513064 pages, LIFO batch:31
><7>  Normal zone: 0 pages used for memmap
><6>ACPI: PM-Timer IO Port: 0x408
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><6>Processor #0 (Bootup-CPU)
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><6>Processor #1
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
><6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Setting APIC routing to flat
><6>Using ACPI (MADT) for SMP configuration information
><4>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
><4>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
><4>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
><6>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
><6>SMP: Allowing 4 CPUs, 2 hotplug CPUs
><6>PERCPU: Allocating 50296 bytes of per cpu data
><4>Built 1 zonelists.  Total pages: 515736
><5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 vga=0x31a resume=/dev/sda1 splash=silent
><6>bootsplash: silent mode.
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>time.c: Detected 2660.107 MHz processor.
><4>Console: colour dummy device 80x25
><4>Checking aperture...
><7>Calgary: detecting Calgary via BIOS EBDA area
><7>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
><4>Memory: 2054796k/2097084k available (2049k kernel code, 41900k reserved, 1018k data, 316k init)
><4>Calibrating delay using timer specific routine.. 5325.14 BogoMIPS (lpj=10650291)
><6>Security Framework v1.0.0 initialized
><4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Mount-cache hash table entries: 256
><6>CPU: Trace cache: 12K uops, L1 D cache: 16K
><6>CPU: L2 cache: 1024K
><6>CPU 0/0 -> Node 0
><4>using mwait in idle threads.
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>CPU0: Thermal monitoring enabled (TM1)
><6>SMP alternatives: switching to UP code
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 7815k freed
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 650 Objects with 62 Devices 184 Methods 38 Regions
><4> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><6>Using local APIC timer interrupts.
><4>result 8312807
><6>Detected 8.312 MHz APIC timer.
><6>SMP alternatives: switching to SMP code
><6>Booting processor 1/2 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 5320.53 BogoMIPS (lpj=10641078)
><6>CPU: Trace cache: 12K uops, L1 D cache: 16K
><6>CPU: L2 cache: 1024K
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>CPU1: Thermal monitoring enabled (TM1)
><4>             Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
><6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
><6>Brought up 2 CPUs
><4>migration_cost=609
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support.
><6>PCI: Using MMCONFIG at e0000000 - efffffff
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 2 Runtime GPEs in this block
><4>Completing Region/Field/Buffer/Package initialization:.........................................................................................
><4>Initialized 38/38 Regions 9/9 Fields 19/19 Buffers 23/28 Packages (659 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:..
><4>Executed 2 _INI methods requiring 1 _STA executions (examined 69 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><4>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
><4>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 13 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>PCI-GART: No AMD northbridge found.
><4>ACPI: RTC can wake from S4
><6>pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
><6>pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
><6>pnp: 00:0c: iomem range 0xd0000-0xd3fff has been reserved
><6>pnp: 00:0c: iomem range 0xd9000-0xdbfff has been reserved
><6>pnp: 00:0c: iomem range 0xf0000-0xfbfff could not be reserved
><6>pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: c000-cfff
><6>  MEM window: fa000000-fcffffff
><6>  PREFETCH window: c0000000-cfffffff
><6>PCI: Bridge: 0000:02:02.0
><6>  IO window: d000-dfff
><6>  MEM window: dfe00000-dfefffff
><6>  PREFETCH window: d0000000-d7ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: d000-efff
><6>  MEM window: d8000000-dfffffff
><6>  PREFETCH window: d0000000-d7ffffff
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><6>Time: tsc clocksource has been installed.
><4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><4>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
><4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>audit: initializing netlink socket (disabled)
><5>audit(1192808035.012:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>Boot video device is 0000:01:00.0
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>Allocate Port Service[0000:00:01.0:pcie03]
><6>vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010b80000, using 10240k, total 262144k
><6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 98233 bytes
><6>bootsplash: ...found (1280x1024, 35219 bytes, v3).
><4>Console: switching to colour frame buffer device 156x60
><6>fb0: VESA VGA frame buffer device
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker as /class/input/input0
><6>NET: Registered protocol family 1
><6>Freeing unused kernel memory: 316k freed
><4>ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
><4>ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
><6>ACPI: Thermal Zone [THRM] (40 C)
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>ata_piix 0000:00:1f.2: version 2.11
><6>ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>scsi0 : ata_piix
><6>scsi1 : ata_piix
><6>ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fb00 irq 14
><6>ata2: SATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fb08 irq 15
><6>ata1.00: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100
><6>ata1.00: 312581808 sectors, multi 16: LBA48 
><6>ata1.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS06, max UDMA/33
><6>ata1.00: configured for UDMA/100
><6>ata1.01: configured for UDMA/33
><6>ata2.01: ATA-7: ST3500641AS, 3.ADG, max UDMA/133
><6>ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata2.01: configured for UDMA/133
><5>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
><3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 96 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
><4>ata1: port is slow to respond, please be patient (Status 0xd0)
><4>ata1: device not ready (errno=-16), forcing hardreset
><6>ata1: soft resetting link
><6>ata1.00: configured for UDMA/100
><6>ata1.01: configured for UDMA/33
><6>ata1: EH complete
><3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 96 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
><4>ata1: port is slow to respond, please be patient (Status 0xd0)
><4>ata1: device not ready (errno=-16), forcing hardreset
><6>ata1: soft resetting link
><6>ata1.00: configured for UDMA/100
><6>ata1.01: configured for UDMA/33
><6>ata1: EH complete
><3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 96 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
><4>ata1: port is slow to respond, please be patient (Status 0xd0)
><4>ata1: device not ready (errno=-16), forcing hardreset
><6>ata1: soft resetting link
><6>ata1.00: configured for UDMA/100
><6>ata1.01: configured for UDMA/33
><6>ata1: EH complete
><4>ata1.01: limiting speed to UDMA/25:PIO4
><3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.01: cmd a0/01:00:00:60:00/00:00:00:00:00/b0 tag 0 cdb 0x12 data 96 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
><4>ata1: port is slow to respond, please be patient (Status 0xd0)
><4>ata1: device not ready (errno=-16), forcing hardreset
><6>ata1: soft resetting link
><6>ata1.00: configured for UDMA/100
><6>ata1.01: configured for UDMA/25
><6>ata1: EH complete
><6>scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
><5>scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S162L TS06 PQ: 0 ANSI: 5
><5>scsi 1:0:1:0: Direct-Access     ATA      ST3500641AS      3.AD PQ: 0 ANSI: 5
><6>ACPI: Fan [FAN] (on)
><6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.22.9-0.4-atapi-trans-len uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:1d.0
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.22.9-0.4-atapi-trans-len uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.1
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6> sda: sda1 sda2
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><5>sd 1:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
><5>sd 1:0:1:0: [sdb] Write Protect is off
><7>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 1:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
><5>sd 1:0:1:0: [sdb] Write Protect is off
><7>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
><6>usb 1-1: new low speed USB device using uhci_hcd and address 2
><5>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb:<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
><7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb3: new device found, idVendor=0000, idProduct=0000
><6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: EHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.22.9-0.4-atapi-trans-len ehci_hcd
><6>usb usb3: SerialNumber: 0000:00:1d.7
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 8 ports detected
><4> sdb1
><5>sd 1:0:1:0: [sdb] Attached SCSI disk
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
><6>usb usb4: new device found, idVendor=0000, idProduct=0000
><6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.22.9-0.4-atapi-trans-len uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.2
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
><6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
><6>usb usb5: new device found, idVendor=0000, idProduct=0000
><6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: UHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.22.9-0.4-atapi-trans-len uhci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.3
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>usb 3-6: new high speed USB device using ehci_hcd and address 4
><4>swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
><4>swsusp: Basic memory bitmaps created
><4>swsusp: Basic memory bitmaps freed
><4>Attempting manual resume
><6>usb 3-6: new device found, idVendor=058f, idProduct=6362
><6>usb 3-6: new device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 3-6: Product: Mass Storage Device
><6>usb 3-6: Manufacturer: Generic
><6>usb 3-6: SerialNumber: 058F312D81B
><6>usb 3-6: configuration #1 chosen from 1 choice
><6>usb 1-1: new low speed USB device using uhci_hcd and address 3
><6>usb 1-1: new device found, idVendor=046d, idProduct=c517
><6>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 1-1: Product: USB Receiver
><6>usb 1-1: Manufacturer: Logitech
><6>usb 1-1: configuration #1 chosen from 1 choice
><6>usb 2-1: new full speed USB device using uhci_hcd and address 2
><6>usb 2-1: new device found, idVendor=0471, idProduct=0815
><6>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 2-1: Product: eHome Infrared Transceiver
><6>usb 2-1: Manufacturer: Philips
><6>usb 2-1: SerialNumber: PH00OsT9
><6>usb 2-1: configuration #1 chosen from 1 choice
><6>usbcore: registered new interface driver hiddev
><6>input: Logitech USB Receiver as /class/input/input1
><6>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1
><6>drivers/hid/usbhid/hid-core.c: Fixing up Logitech keyboard report descriptor
><6>input: Logitech USB Receiver as /class/input/input2
><6>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda2, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>scsi 0:0:1:0: Attached scsi generic sg1 type 5
><5>sd 1:0:1:0: Attached scsi generic sg2 type 0
><6>input: Power Button (FF) as /class/input/input3
><6>ACPI: Power Button (FF) [PWRF]
><6>input: Power Button (CM) as /class/input/input4
><6>ACPI: Power Button (CM) [PWRB]
><6>iTCO_vendor_support: vendor-support=0
><6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
><6>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
><6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
><6>FDC 0 is a post-1991 82077
><3>intel_rng: FWH not detected
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>Initializing USB Mass Storage driver...
><6>scsi2 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 4
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><6>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 19
><6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[dffff000-dffff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
><6>Linux video capture interface: v2.00
><6>r8169 Gigabit Ethernet driver 2.2LK loaded
><6>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20
><6>eth0: RTL8169s/8110s at 0xffffc2000032a000, 00:16:ec:14:b5:19, IRQ 20
><6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
><4>rtc_cmos: probe of 00:03 failed with error -16
><5>scsi 2:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
><5>sd 2:0:0:0: [sdc] Attached SCSI removable disk
><5>sd 2:0:0:0: Attached scsi generic sg3 type 0
><5>scsi 2:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
><5>sd 2:0:0:1: [sdd] Attached SCSI removable disk
><5>sd 2:0:0:1: Attached scsi generic sg4 type 0
><5>scsi 2:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
><5>sd 2:0:0:2: [sde] Attached SCSI removable disk
><5>sd 2:0:0:2: Attached scsi generic sg5 type 0
><5>scsi 2:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
><5>sd 2:0:0:3: [sdf] Attached SCSI removable disk
><5>sd 2:0:0:3: Attached scsi generic sg6 type 0
><7>usb-storage: device scan complete
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00000ae6ff46fc60]
><3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.01: cmd a0/01:00:00:80:00/00:00:00:00:00/b0 tag 0 cdb 0x5a data 128 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
><4>ata1: port is slow to respond, please be patient (Status 0xd0)
><4>ata1: device not ready (errno=-16), forcing hardreset
><6>ata1: soft resetting link
><6>ata1.00: configured for UDMA/100
><6>ata1.01: configured for UDMA/25
><6>ata1: EH complete
><3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.01: cmd a0/01:00:00:80:00/00:00:00:00:00/b0 tag 0 cdb 0x5a data 128 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
><4>ata1: port is slow to respond, please be patient (Status 0xd0)
><4>ata1: device not ready (errno=-16), forcing hardreset
><6>ata1: soft resetting link
><6>ata1.00: configured for UDMA/100
><6>ata1.01: configured for UDMA/25
><6>ata1: EH complete
><5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
><3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.01: cmd a0/01:00:00:80:00/00:00:00:00:00/b0 tag 0 cdb 0x5a data 128 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
><4>ata1: port is slow to respond, please be patient (Status 0xd0)
><4>ata1: device not ready (errno=-16), forcing hardreset
><6>ata1: soft resetting link
><6>ata1.00: configured for UDMA/100
><6>ata1.01: configured for UDMA/25
><6>ata1: EH complete
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><3>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.01: cmd a0/01:00:00:80:00/00:00:00:00:00/b0 tag 0 cdb 0x5a data 128 in
><4>         res 40/00:02:00:24:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
><4>ata1: port is slow to respond, please be patient (Status 0xd0)
><4>ata1: device not ready (errno=-16), forcing hardreset
><6>ata1: soft resetting link
><6>ata1.00: configured for UDMA/100
><6>ata1.01: configured for UDMA/25
><6>ata1: EH complete
><4>sr0: scsi-1 drive
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 0:0:1:0: Attached scsi CD-ROM sr0
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6>parport_pc 00:08: reported by Plug and Play ACPI
><5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
><6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
><6>hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
><7>ALSA sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2335:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2339:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2347:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x1c
><6>ivtv:  ==================== START INIT IVTV ====================
><6>ivtv:  version 1.0.0 (2.6.22.9-0.4-atapi-trans-len SMP mod_unload ) loading
><6>ivtv0: Autodetected Hauppauge card (cx23416 based)
><6>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 19 (level, low) -> IRQ 19
><6>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
><6>ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
><6>ivtv0: Encoder revision: 0x02060039
><6>ivtv i2c driver #0: Test OK
><6>tveeprom 1-0050: Hauppauge model 23552, rev D492, serial# 8006143
><6>tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
><6>tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
><6>tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
><6>tveeprom 1-0050: audio processor is CX25843 (idx 37)
><6>tveeprom 1-0050: decoder processor is CX25843 (idx 30)
><6>tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter
><6>ivtv0: Autodetected WinTV PVR 500 (unit #1)
><6>tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
><6>tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
><4>tuner 1-0060: TEA5767 detected.
><6>tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
><6>tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
><6>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
><6>cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
><6>cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
><6>wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
><6>tuner 1-0061: type set to 57 (Philips FQ1236A MK4)
><6>ivtv0: Registered device video0 for encoder MPEG (4 MB)
><6>ivtv0: Registered device video32 for encoder YUV (2 MB)
><6>ivtv0: Registered device vbi0 for encoder VBI (1 MB)
><6>ivtv0: Registered device video24 for encoder PCM audio (1 MB)
><6>ivtv0: Registered device radio0 for encoder radio
><6>ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
><6>ivtv:  ======================  NEXT CARD  ======================
><6>ivtv1: Autodetected Hauppauge card (cx23416 based)
><6>ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 20 (level, low) -> IRQ 20
><6>ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
><6>ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
><6>ivtv1: Encoder revision: 0x02060039
><6>ivtv i2c driver #1: Test OK
><6>tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
><6>tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
><6>tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
><6>cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
><6>cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
><6>wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
><6>tveeprom 2-0050: Hauppauge model 23552, rev D492, serial# 8006143
><6>tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
><6>tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
><6>tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
><6>tveeprom 2-0050: audio processor is CX25843 (idx 37)
><6>tveeprom 2-0050: decoder processor is CX25843 (idx 30)
><6>tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter
><6>ivtv1: Correcting tveeprom data: no radio present on second unit
><6>ivtv1: Autodetected WinTV PVR 500 (unit #2)
><6>tuner 2-0061: type set to 57 (Philips FQ1236A MK4)
><6>ivtv1: Registered device video1 for encoder MPEG (4 MB)
><6>ivtv1: Registered device video33 for encoder YUV (2 MB)
><6>ivtv1: Registered device vbi1 for encoder VBI (1 MB)
><6>ivtv1: Registered device video25 for encoder PCM audio (1 MB)
><6>ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
><6>ivtv:  ====================  END INIT IVTV  ====================
><6>Adding 4200956k swap on /dev/sda1.  Priority:-1 extents:1 across:4200956k
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sdb1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>AppArmor: AppArmor initialized
><5>audit(1192808303.823:2):  type=1505 info="AppArmor initialized" pid=2165
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Fri Oct 19 15:33:56 2007
>
>Creating device nodes with udev
>Trying manual resume from /dev/sda1
>Invoking userspace resume from /dev/sda1
>resume: Could not stat configuration file
>resume: libgcrypt version: 1.2.4
>Trying manual resume from /dev/sda1
>Invoking in-kernel resume from /dev/sda1
>Waiting for device /dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 to appear:  ok
>fsck 1.40.2 (12-Jul-2007)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: recovering journal
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: Clearing orphaned inode 9322625 (uid=1000, gid=100, mode=0140755, size=0)
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: Clearing orphaned inode 9322624 (uid=1000, gid=100, mode=0140755, size=0)
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: Clearing orphaned inode 9322623 (uid=1000, gid=100, mode=0140755, size=0)
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: Clearing orphaned inode 9322621 (uid=1000, gid=100, mode=0140755, size=0)
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: Clearing orphaned inode 6915606 (uid=1000, gid=100, mode=0100600, size=2048)
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: Clearing orphaned inode 6915595 (uid=1000, gid=100, mode=0100600, size=2048)
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: Clearing orphaned inode 6915586 (uid=0, gid=0, mode=0100600, size=217016)
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: Clearing orphaned inode 6915488 (uid=1000, gid=100, mode=0100600, size=0)
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: Clearing orphaned inode 9322611 (uid=1000, gid=100, mode=0140755, size=0)
>/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2: clean, 323819/19021824 files, 4231168/38021838 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Oct 19 11:35:24 2007
>
>done
>Starting udevd udevd-event[1825]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
>
>done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda2 is already mounted on /
>
>Activating device mapper...
>done
>Checking file systems...
>fsck 1.40.2 (12-Jul-2007)
>/dev/disk/by-id/scsi-SATA_ST3500641AS_3PM163FB-part1: recovering journal
>/dev/disk/by-id/scsi-SATA_ST3500641AS_3PM163FB-part1: clean, 821/61063168 files, 1970178/122096000 blocks
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sdb1 on /home type ext3 (rw,acl,user_xattr)
>doneActivating remaining swap-devices in /etc/fstab...
>doneConfiguring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>Configured serial ports
>done<notice>killproc: kill(1145,29)
>Creating /var/log/boot.msg
>doneSetting up the hardware clockdone
>Cleaning up using /sbin/modify_resolvconf:
>restored /etc/resolv.conf from /etc/resolv.conf.saved.by.dhcpcd.eth0
>done
>Mounting securityfs on /sys/kernel/security done
>Loading AppArmor module done
>Loading AppArmor profiles done
>Setting up hostname 'chameleon-htpc'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>Setting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>Can't determine current runlevel
>done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1145,3)
>
>INIT: Entering runlevel: 5
>
>
>
>Boot logging started on /dev/tty1(/dev/console) at Fri Oct 19 11:38:28 2007
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
><notice>startproc: execve (/bin/dbus-daemon) [ /bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/bin/dbus-daemon ]
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/sbin/acpid ]
>Starting resource managerdone
>Starting D-Bus daemonInitializing random number generatordone
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Starting acpid done
>done
>.Unknown username "gdm" in message bus configuration file
>Starting ConsoleKitChecking/updating CPU microcode done
><notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>done
>Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>done
>Loading CPUFreq modules (CPUFreq not supported)
>Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>done
>Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>done
>Setting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>done    eth0      device: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
>    eth0      (DHCP) . <notice>pidofproc: dhcpcd 3132
>. <notice>killproc: kill(2549,20)
><notice>killproc: kill(2561,1)
><notice>killproc: kill(2549,18)
><notice>killproc: kill(2549,12)
>IP/Netmask: 192.168.10.3 / 255.255.255.0 
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
>Mount CIFS File Systems unused
><notice>checkproc: /opt/kde3/bin/kdm 2835
>Loading keymap i386/qwerty/us.map.gz
>done<notice>killproc: kill(2828,15)
>Loading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>done<notice>checkproc: /opt/kde3/bin/kdm 2835
>Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/sbin/auditd ]
>done
>Starting Avahi daemon<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
>done
>Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>done
>Starting irqbalance <notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
>done
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
>Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/sbin/portmap ]
>done
>Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>done
>Starting mail service (Postfix)<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting SSH daemondone
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>Starting powersaved: done
>done
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>done
>Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
>done
>Starting Firewall Initialization (phase 2 of 2) done
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: smbfs
><notice>killproc: kill(2459,3)

Actions: View

Attachments on bug 229260: 110439 | 110440 | 112812 | 113034 | 146652 | 146927 | 147389 | 157226 | 158345 | 159331 | 159332 | 159974 | 160145 | 160656 | 160699 | 161349 | 161350 | 173856 | 179005 | 179156 | 179246 | 179479 | 179480 | 179499 | 179500 | 179503 | 179556 | 179801