Attachment 179556 Details for Bug 229260

dmesg after inserting DVD without GPCMD_READ_CD

dmesg.log (text/plain), 32.56 KB, created by Benjamin McCann on 2007-10-20 06:39:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Benjamin McCann

Created: 2007-10-20 06:39:23 UTC

Size: 32.56 KB

patch

obsolete

>Linux version 2.6.22.9-0.4-comment115 (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP Sat Oct 20 01:49:16 EDT 2007
>Command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 vga=0x31a resume=/dev/sda1 splash=silent
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffef800 (usable)
> BIOS-e820: 000000007ffef800 - 000000007fff0000 (reserved)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524271) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.2 present.
>ACPI: RSDP 000F76B0, 0014 (r0 IntelR)
>ACPI: RSDT 7FFF3040, 0030 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FFF30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FFF3180, 4B36 (r1 INTELR AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FFF0000, 0040
>ACPI: MCFG 7FFF7E00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FFF7D00, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ffef000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524271) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007ffef000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524271
>On node 0 totalpages: 524174
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1271 pages reserved
>  DMA zone: 2672 pages, LIFO batch:0
>  DMA32 zone: 7111 pages used for memmap
>  DMA32 zone: 513064 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 50296 bytes of per cpu data
>Built 1 zonelists.  Total pages: 515736
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD1600JB-00WD-WMAL91085282-part2 vga=0x31a resume=/dev/sda1 splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2660.104 MHz processor.
>Console: colour dummy device 80x25
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2054796k/2097084k available (2049k kernel code, 41900k reserved, 1018k data, 316k init)
>Calibrating delay using timer specific routine.. 5325.15 BogoMIPS (lpj=10650303)
>Security Framework v1.0.0 initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>Unpacking initramfs... done
>Freeing initrd memory: 7813k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 650 Objects with 62 Devices 184 Methods 38 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>result 8312761
>Detected 8.312 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5320.56 BogoMIPS (lpj=10641120)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>             Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>migration_cost=641
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support.
>PCI: Using MMCONFIG at e0000000 - efffffff
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 2 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:.........................................................................................
>Initialized 38/38 Regions 9/9 Fields 19/19 Buffers 23/28 Packages (659 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:..
>Executed 2 _INI methods requiring 1 _STA executions (examined 69 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>ACPI: RTC can wake from S4
>pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
>pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0c: iomem range 0xd0000-0xd3fff has been reserved
>pnp: 00:0c: iomem range 0xd9000-0xdbfff has been reserved
>pnp: 00:0c: iomem range 0xf0000-0xfbfff could not be reserved
>pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:02:02.0
>  IO window: d000-dfff
>  MEM window: dfe00000-dfefffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-efff
>  MEM window: d8000000-dfffffff
>  PREFETCH window: d0000000-d7ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>Time: tsc clocksource has been installed.
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1192861280.008:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010b80000, using 10240k, total 262144k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 98233 bytes
>bootsplash: ...found (1280x1024, 35219 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>NET: Registered protocol family 1
>Freeing unused kernel memory: 316k freed
>ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THRM] (40 C)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.11
>ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fb00 irq 14
>ata2: SATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fb08 irq 15
>ata1.00: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>ata1.01: ATAPI: TSSTcorpCD/DVDW SH-S162L, TS06, max UDMA/33
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata2.01: ATA-7: ST3500641AS, 3.ADG, max UDMA/133
>ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.01: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
>scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S162L TS06 PQ: 0 ANSI: 5
>scsi 1:0:1:0: Direct-Access     ATA      ST3500641AS      3.AD PQ: 0 ANSI: 5
>ACPI: Fan [FAN] (on)
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.9-0.4-comment115 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.22.9-0.4-comment115 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
> sda1 sda2
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 1:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:1:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: EHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.22.9-0.4-comment115 ehci_hcd
>usb usb3: SerialNumber: 0000:00:1d.7
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.22.9-0.4-comment115 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.22.9-0.4-comment115 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
>swsusp: Basic memory bitmaps created
>usb 3-6: new high speed USB device using ehci_hcd and address 4
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>usb 3-6: new device found, idVendor=058f, idProduct=6362
>usb 3-6: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-6: Product: Mass Storage Device
>usb 3-6: Manufacturer: Generic
>usb 3-6: SerialNumber: 058F312D81B
>usb 3-6: configuration #1 chosen from 1 choice
>usb 1-1: new low speed USB device using uhci_hcd and address 3
>usb 1-1: new device found, idVendor=046d, idProduct=c517
>usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: USB Receiver
>usb 1-1: Manufacturer: Logitech
>usb 1-1: configuration #1 chosen from 1 choice
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: new device found, idVendor=0471, idProduct=0815
>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1: Product: eHome Infrared Transceiver
>usb 2-1: Manufacturer: Philips
>usb 2-1: SerialNumber: PH00OsT9
>usb 2-1: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: Logitech USB Receiver as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1
>drivers/hid/usbhid/hid-core.c: Fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /class/input/input2
>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>sd 1:0:1:0: Attached scsi generic sg2 type 0
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>FDC 0 is a post-1991 82077
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>r8169 Gigabit Ethernet driver 2.2LK loaded
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20
>eth0: RTL8169s/8110s at 0xffffc20000326000, 00:16:ec:14:b5:19, IRQ 20
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>ALSA sound/pci/hda/hda_codec.c:2335:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2339:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2347:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x1c
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[dffff000-dffff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>GSI 19 (level, low) -> IRQ 19
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:03 failed with error -16
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Linux video capture interface: v2.00
>ivtv:  ==================== START INIT IVTV ====================
>ivtv:  version 1.0.0 (2.6.22.9-0.4-comment115 SMP mod_unload ) loading
>ivtv0: Autodetected Hauppauge card (cx23416 based)
>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 19 (level, low) -> IRQ 19
>ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
>scsi 2:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 2:0:0:0: [sdc] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>scsi 2:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 2:0:0:1: [sdd] Attached SCSI removable disk
>sd 2:0:0:1: Attached scsi generic sg4 type 0
>scsi 2:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 2:0:0:2: [sde] Attached SCSI removable disk
>sd 2:0:0:2: Attached scsi generic sg5 type 0
>scsi 2:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 2:0:0:3: [sdf] Attached SCSI removable disk
>sd 2:0:0:3: Attached scsi generic sg6 type 0
>usb-storage: device scan complete
>ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00000ae6ff46fc60]
>ivtv0: Encoder revision: 0x02060039
>ivtv i2c driver #0: Test OK
>tveeprom 1-0050: Hauppauge model 23552, rev D492, serial# 8006143
>tveeprom 1-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
>tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
>tveeprom 1-0050: audio processor is CX25843 (idx 37)
>tveeprom 1-0050: decoder processor is CX25843 (idx 30)
>tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter
>ivtv0: Autodetected WinTV PVR 500 (unit #1)
>tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
>tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
>tuner 1-0060: TEA5767 detected.
>tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
>tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio)
>tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
>cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
>wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
>tuner 1-0061: type set to 57 (Philips FQ1236A MK4)
>ivtv0: Registered device video0 for encoder MPEG (4 MB)
>ivtv0: Registered device video32 for encoder YUV (2 MB)
>ivtv0: Registered device vbi0 for encoder VBI (1 MB)
>ivtv0: Registered device video24 for encoder PCM audio (1 MB)
>ivtv0: Registered device radio0 for encoder radio
>ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
>ivtv:  ======================  NEXT CARD  ======================
>ivtv1: Autodetected Hauppauge card (cx23416 based)
>ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 20 (level, low) -> IRQ 20
>ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
>ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
>ivtv1: Encoder revision: 0x02060039
>ivtv i2c driver #1: Test OK
>tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
>tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
>tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
>cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
>cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
>wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
>tveeprom 2-0050: Hauppauge model 23552, rev D492, serial# 8006143
>tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57)
>tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
>tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
>tveeprom 2-0050: audio processor is CX25843 (idx 37)
>tveeprom 2-0050: decoder processor is CX25843 (idx 30)
>tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter
>ivtv1: Correcting tveeprom data: no radio present on second unit
>ivtv1: Autodetected WinTV PVR 500 (unit #2)
>tuner 2-0061: type set to 57 (Philips FQ1236A MK4)
>ivtv1: Registered device video1 for encoder MPEG (4 MB)
>ivtv1: Registered device video33 for encoder YUV (2 MB)
>ivtv1: Registered device vbi1 for encoder VBI (1 MB)
>ivtv1: Registered device video25 for encoder PCM audio (1 MB)
>ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
>ivtv:  ====================  END INIT IVTV  ====================
>Adding 4200956k swap on /dev/sda1.  Priority:-1 extents:1 across:4200956k
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>AppArmor: AppArmor initialized
>audit(1192861320.846:2):  type=1505 info="AppArmor initialized" pid=2163
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sr 0:0:1:0: [sr0] Sense Key : Hardware Error [current] 
>sr 0:0:1:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 64
>Buffer I/O error on device sr0, logical block 8
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sr 0:0:1:0: [sr0] Sense Key : Hardware Error [current] 
>sr 0:0:1:0: [sr0] Add. Sense: Timeout on logical unit
>end_request: I/O error, dev sr0, sector 64
>Buffer I/O error on device sr0, logical block 8
>r8169: eth0: link up
>NET: Registered protocol family 17
>audit(1192861353.217:3): audit_pid=3739 old=0 by auid=4294967295
>eth0: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:10/00:00:00:00:00/b0 tag 0 cdb 0x28 data 4096 in
>         res 40/00:02:00:0c:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting link
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:10/00:00:00:00:00/b0 tag 0 cdb 0x28 data 4096 in
>         res 40/00:02:00:0c:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting link
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:10/00:00:00:00:00/b0 tag 0 cdb 0x28 data 4096 in
>         res 40/00:02:00:0c:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting link
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>usb 3-6: reset high speed USB device using ehci_hcd and address 4
>ata1.01: limiting speed to UDMA/25:PIO4
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:10/00:00:00:00:00/b0 tag 0 cdb 0x28 data 4096 in
>         res 40/00:02:00:0c:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting link
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/25
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sr 0:0:1:0: [sr0] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0e 09 0c 00 00 00 02 00 00 
>        00 0c 00 00 b0 40 
>sr 0:0:1:0: [sr0] Add. Sense: No additional sense information
>end_request: I/O error, dev sr0, sector 64
>Buffer I/O error on device sr0, logical block 16
>Buffer I/O error on device sr0, logical block 17
>ata1: EH complete
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:10/00:00:00:00:00/b0 tag 0 cdb 0x28 data 4096 in
>         res 40/00:02:00:0c:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting link
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/25
>ata1: EH complete
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:10/00:00:00:00:00/b0 tag 0 cdb 0x28 data 4096 in
>         res 40/00:02:00:0c:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting link
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/25
>ata1: EH complete
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:10/00:00:00:00:00/b0 tag 0 cdb 0x28 data 4096 in
>         res 40/00:02:00:0c:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>usb 3-6: reset high speed USB device using ehci_hcd and address 4
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting link
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/25
>ata1: EH complete
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:10/00:00:00:00:00/b0 tag 0 cdb 0x28 data 4096 in
>         res 40/00:02:00:0c:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: device not ready (errno=-16), forcing hardreset
>ata1: soft resetting link
>SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:16:ec:14:b5:19:00:12:25:57:71:7f:08:00 SRC=130.57.4.24 DST=192.168.10.3 LEN=40 TOS=0x00 PREC=0x00 TTL=105 ID=33620 DF PROTO=TCP SPT=80 DPT=26909 WINDOW=0 RES=0x00 ACK RST URGP=0 
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/25
>sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sr 0:0:1:0: [sr0] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0e 09 0c 00 00 00 02 00 00 
>        00 0c 00 00 b0 40 
>sr 0:0:1:0: [sr0] Add. Sense: No additional sense information
>end_request: I/O error, dev sr0, sector 64
>Buffer I/O error on device sr0, logical block 16
>Buffer I/O error on device sr0, logical block 17
>ata1: EH complete
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.10.3 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44

Actions: View

Attachments on bug 229260: 110439 | 110440 | 112812 | 113034 | 146652 | 146927 | 147389 | 157226 | 158345 | 159331 | 159332 | 159974 | 160145 | 160656 | 160699 | 161349 | 161350 | 173856 | 179005 | 179156 | 179246 | 179479 | 179480 | 179499 | 179500 | 179503 | 179556 | 179801