Attachment 181931 Details for Bug 338959

dmesg output of the machine

dmesg.txt (text/plain), 16.06 KB, created by Moritz Mühlenhoff on 2007-11-03 19:53:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Moritz Mühlenhoff

Created: 2007-11-03 19:53:49 UTC

Size: 16.06 KB

patch

obsolete

>Linux version 2.6.22.9-0.4-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/10/05 21:32:04 UTC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Entering add_active_range(0, 0, 131056) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131056
>  HighMem    131056 ->   131056
>early_node_map[1] active PFN ranges
>    0:        0 ->   131056
>On node 0 totalpages: 131056
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125969 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F6A20, 0014 (r0 VIA694)
>ACPI: RSDT 1FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 1FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 1FFF30C0, 3147 (r1 VIA694 AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 1FFF0000, 0040
>ACPI: PM-Timer IO Port: 0x4008
>Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
>Built 1 zonelists.  Total pages: 130033
>Kernel command line: root=/dev/sda2 vga=0x31a resume=/dev/sda3 splash=silent
>bootsplash: silent mode.
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0140d000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1794.896 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511464k/524224k available (1824k kernel code, 12232k reserved, 761k data, 228k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
>      .init : 0xc038e000 - 0xc03c7000   ( 228 kB)
>      .data : 0xc02c832b - 0xc0386964   ( 761 kB)
>      .text : 0xc0100000 - 0xc02c832b   (1824 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3593.03 BogoMIPS (lpj=7186067)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>Unpacking initramfs... done
>Freeing initrd memory: 4329k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 457 Objects with 43 Devices 118 Methods 25 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>ACPI: setting ELCR to 0200 (from 0e28)
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>CPU0: AMD Athlon(tm) XP 2200+ stepping 00
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 1 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:...............................................................
>Initialized 25/25 Regions 13/13 Fields 17/17 Buffers 8/18 Packages (466 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:..
>Executed 2 _INI methods requiring 1 _STA executions (examined 47 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 4000-407f claimed by vt8235 PM
>PCI quirk: region 5000-500f claimed by vt8235 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>ACPI: RTC can wake from S4
>pnp: 00:00: iomem range 0xcd000-0xcffff has been reserved
>pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x4000-0x407f has been reserved
>pnp: 00:02: ioport range 0x5000-0x500f has been reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: e0000000-e1ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>audit(1194120299.372:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Boot video device is 0000:01:00.0
>vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 10240k, total 16384k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=5
>vesafb: protected mode interface info at c000:5781
>vesafb: pmi: set display start = c00c5815, set palette = c00c5861
>vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 160x64
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>Switched to NOHz mode on CPU #0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
>PNP: PS/2 controller doesn't have KBD irq; using default 1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 228k freed
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (40 C)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_via 0000:00:11.1: version 0.3.1
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001e000 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001e008 irq 15
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: acpi_pm clocksource has been installed.
>ata1.00: ATA-6: WDC WD800BB-00DKA0, 77.07W77, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: RICOH   DVD+RW MP5240, 1.11, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BB-00DK 77.0 PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            RICOH    DVD+RW MP5240    1.11 PQ: 0 ANSI: 5
>ACPI: Fan [FAN] (on)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d400
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:10.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 3, io base 0x0000d800
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:10.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 10, io base 0x0000dc00
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:10.2
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:10.3: irq 5, io mem 0xe2001000
>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: EHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.22.9-0.4-default ehci_hcd
>usb usb4: SerialNumber: 0000:00:10.3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>usb 1-2: unable to read config index 0 descriptor/all
>usb 1-2: can't read configurations, error -71
>hub 4-0:1.0: 6 ports detected
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>usb 1-2: new low speed USB device using uhci_hcd and address 4
>usb 1-2: new device found, idVendor=046d, idProduct=c315
>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2: Product: Logitech USB Keyboard
>usb 1-2: Manufacturer: Logitech
>usb 1-2: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver hiddev
>input: Logitech Logitech USB Keyboard as /class/input/input2
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:10.0-2
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>REISERFS (device sda2): found reiserfs format "3.6" with standard journal
>REISERFS (device sda2): using ordered data mode
>reiserfs: using flush barriers
>REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda2): checking transaction log (sda2)
>REISERFS (device sda2): Using r5 hash to sort names
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Linux agpgart interface v0.102 (c) Dave Jones
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>agpgart: Detected VIA KT266/KY266x/KT333 chipset
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>via-rhine: Broken BIOS detected, avoid_D3 enabled.
>agpgart: AGP aperture is 256M @ 0xc0000000
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>eth0: VIA Rhine II at 0x1ec00, 00:0d:87:5d:01:2b, IRQ 11.
>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (CM) as /class/input/input4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:05 failed with error -16
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>parport0: Printer, Samsung ML-1210
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>NET: Registered protocol family 23
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>Adding 618492k swap on /dev/sda3.  Priority:42 extents:1 across:618492k
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>loop: module loaded
>NTFS driver 2.1.28 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>powernow-k8: Processor cpuid 6a0 not supported
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1194116739.715:2): audit_pid=3316 old=0 by auid=4294967295
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 338959: 181931 | 181945