Attachment 194754 Details for Bug 157514

/var/log/boot.msg Suse 10.3

bootmsg.txt (text/plain), 35.95 KB, created by Bernhard Heibler on 2008-02-13 19:17:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bernhard Heibler

Created: 2008-02-13 19:17:15 UTC

Size: 35.95 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.22.17-0.1-default
>Loaded 26163 symbols from /boot/System.map-2.6.22.17-0.1-default.
>Symbols match kernel version 2.6.22.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
><4> BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
><4> BIOS-e820: 000000003ff70000 - 000000003ff7c000 (ACPI data)
><4> BIOS-e820: 000000003ff7c000 - 000000003ff80000 (ACPI NVS)
><4> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><4> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
><4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
><5>127MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>found SMP MP-table at 000f6540
><7>Entering add_active_range(0, 0, 262000) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  Normal       4096 ->   229376
><4>  HighMem    229376 ->   262000
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->   262000
><7>On node 0 totalpages: 262000
><7>  DMA zone: 32 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 4064 pages, LIFO batch:0
><7>  Normal zone: 1760 pages used for memmap
><7>  Normal zone: 223520 pages, LIFO batch:31
><7>  HighMem zone: 254 pages used for memmap
><7>  HighMem zone: 32370 pages, LIFO batch:7
><6>DMI present.
><6>Using APIC driver default
><4>ACPI: RSDP 000F64A0, 0014 (r0 PTLTD )
><4>ACPI: RSDT 3FF7876A, 0030 (r1 PTLTD    RSDT    6040000  LTP        0)
><4>ACPI: FACP 3FF7BEE0, 0074 (r1 INTEL  PLACER    6040000 PTL         8)
><4>ACPI: DSDT 3FF7879A, 3746 (r1   TYAN    S2668  6040000 MSFT  100000D)
><4>ACPI: FACS 3FF7CFC0, 0040
><4>ACPI: APIC 3FF7BF54, 0084 (r1 PTLTD  	 APIC    6040000  LTP        0)
><4>ACPI: BOOT 3FF7BFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
><6>ACPI: PM-Timer IO Port: 0x1008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><4>Processor #0 15:2 APIC version 20
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
><4>Processor #6 15:2 APIC version 20
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x07] enabled)
><4>Processor #7 15:2 APIC version 20
><6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
><4>Processor #1 15:2 APIC version 20
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
><4>Built 1 zonelists.  Total pages: 259954
><5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 vga=0x31a resume=/dev/sda1 splash=silent
><6>bootsplash: silent mode.
><7>mapped APIC to ffffd000 (fee00000)
><7>mapped IOAPIC to ffffc000 (fec00000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 16384 bytes)
><4>Detected 2799.349 MHz processor.
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 1030656k/1048000k available (1829k kernel code, 16596k reserved, 764k data, 228k init, 130496k highmem)
><4>virtual kernel memory layout:
><4>    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)
><4>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
><4>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
><4>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
><4>      .init : 0xc0390000 - 0xc03c9000   ( 228 kB)
><4>      .data : 0xc02c95cb - 0xc0388964   ( 764 kB)
><4>      .text : 0xc0100000 - 0xc02c95cb   (1829 kB)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 5603.11 BogoMIPS (lpj=11206229)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
><6>CPU: Trace cache: 12K uops, L1 D cache: 8K
><6>CPU: L2 cache: 512K
><6>CPU: Physical Processor ID: 0
><7>CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
><6>CPU0: Thermal monitoring enabled
><4>Compat vDSO mapped to ffffe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 4072k freed
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 360 Objects with 39 Devices 125 Methods 19 Regions
><4> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><4>CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
><6>SMP alternatives: switching to SMP code
><4>Booting processor 1/1 eip 3000
><6>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 5598.86 BogoMIPS (lpj=11197731)
><7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
><6>CPU: Trace cache: 12K uops, L1 D cache: 8K
><6>CPU: L2 cache: 512K
><6>CPU: Physical Processor ID: 0
><7>CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#1.
><6>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
><6>CPU1: Thermal monitoring enabled
><4>CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
><6>SMP alternatives: switching to SMP code
><4>Booting processor 2/6 eip 3000
><6>Initializing CPU#2
><4>Calibrating delay using timer specific routine.. 5598.90 BogoMIPS (lpj=11197812)
><7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
><6>CPU: Trace cache: 12K uops, L1 D cache: 8K
><6>CPU: L2 cache: 512K
><6>CPU: Physical Processor ID: 3
><7>CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#2.
><6>CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
><6>CPU2: Thermal monitoring enabled
><4>CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
><6>SMP alternatives: switching to SMP code
><4>Booting processor 3/7 eip 3000
><6>Initializing CPU#3
><4>Calibrating delay using timer specific routine.. 5598.91 BogoMIPS (lpj=11197825)
><7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
><6>CPU: Trace cache: 12K uops, L1 D cache: 8K
><6>CPU: L2 cache: 512K
><6>CPU: Physical Processor ID: 3
><7>CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#3.
><6>CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
><6>CPU3: Thermal monitoring enabled
><4>CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
><6>Total of 4 processors activated (22399.79 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
><6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
><6>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
><6>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
><6>Brought up 4 CPUs
><4>migration_cost=6,595
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd915, last bus=2
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 0 Runtime GPEs in this block
><7>ACPI: EC: Look up EC in DSDT
><4>Completing Region/Field/Buffer/Package initialization:..........................................................
><4>Initialized 15/19 Regions 0/0 Fields 39/39 Buffers 4/13 Packages (369 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:
><4>Executed 0 _INI methods requiring 0 _STA executions (examined 45 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><4>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
><4>* this clock source is slow. If you are sure your timer does not have
><4>* this bug, please use "acpi_pm_good" to disable the workaround
><4>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
><4>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICH4._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 14 15)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 14 15)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 14 15)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 15 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PnPBIOS: Disabled by ACPI PNP
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>ACPI: RTC can wake from S4
><6>Time: tsc clocksource has been installed.
><3>PCI: Failed to allocate mem resource #6:20000@f8000000 for 0000:01:00.0
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: disabled.
><6>  MEM window: d9000000-d9ffffff
><6>  PREFETCH window: f0000000-f7ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 2000-2fff
><6>  MEM window: da000000-da0fffff
><6>  PREFETCH window: disabled.
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
><4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>Simple Boot Flag at 0x36 set to 0x1
><6>Machine check exception polling timer started.
><6>audit: initializing netlink socket (disabled)
><5>audit(1202933611.700:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>Boot video device is 0000:01:00.0
><6>vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 65536k
><6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
><6>vesafb: protected mode interface info at 00ff:44f0
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 98233 bytes
><6>bootsplash: ...found (1280x1024, 35219 bytes, v3).
><4>Console: switching to colour frame buffer device 156x60
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>Switched to NOHz mode on CPU #2
><6>Switched to NOHz mode on CPU #3
><6>Switched to NOHz mode on CPU #0
><6>Switched to NOHz mode on CPU #1
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><4>floppy0: no floppy controllers found
><6>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker as /class/input/input0
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 228k freed
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>ata_piix 0000:00:1f.1: version 2.11
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>scsi0 : ata_piix
><6>scsi1 : ata_piix
><6>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118c0 irq 14
><6>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118c8 irq 15
><6>ata1.00: ATAPI: LITE-ON DVDRW LH-20A1P, KL0G, max UDMA/66
><4>ata1.00: limited to UDMA/33 due to 40-wire cable
><6>ata1.00: configured for UDMA/33
><5>scsi 0:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1P   KL0G PQ: 0 ANSI: 5
><7>sata_promise 0000:02:02.0: version 2.09
><6>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 20 (level, low) -> IRQ 17
><6>scsi2 : sata_promise
><6>scsi3 : sata_promise
><6>scsi4 : sata_promise
><6>ata3: SATA max UDMA/133 cmd 0xf881a200 ctl 0xf881a238 bmdma 0x00000000 irq 17
><6>ata4: SATA max UDMA/133 cmd 0xf881a280 ctl 0xf881a2b8 bmdma 0x00000000 irq 17
><6>ata5: PATA max UDMA/133 cmd 0xf881a300 ctl 0xf881a338 bmdma 0x00000000 irq 17
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata3.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133
><6>ata3.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 0/32)
><6>ata3.00: configured for UDMA/133
><6>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata4.00: ATA-7: ST380815AS, 3.AAD, max UDMA/133
><6>ata4.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 0/32)
><6>ata4.00: configured for UDMA/133
><5>scsi 2:0:0:0: Direct-Access     ATA      ST380811AS       3.AA PQ: 0 ANSI: 5
><5>scsi 3:0:0:0: Direct-Access     ATA      ST380815AS       3.AA PQ: 0 ANSI: 5
><6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><5>sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
><6>USB Universal Host Controller Interface driver v3.0
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1<6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd8000000
><4> sda2 sda3
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><5>sd 2:0:0:0: [sda] Attached SCSI disk
><5>sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
><5>sd 3:0:0:0: [sdb] Write Protect is off
><7>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
><5>sd 3:0:0:0: [sdb] Write Protect is off
><7>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: sdb1 sdb2 sdb3
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><5>sd 3:0:0:0: [sdb] Attached SCSI disk
><6>usb usb1: Product: EHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
><6>usb usb1: SerialNumber: 0000:00:1d.7
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 6 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001840
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.0
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001860
><6>usb usb3: new device found, idVendor=0000, idProduct=0000
><6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1d.1
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.2: irq 16, io base 0x00001880
><6>usb usb4: new device found, idVendor=0000, idProduct=0000
><6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.2
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>usb 2-1: new low speed USB device using uhci_hcd and address 2
><4>swsusp: Basic memory bitmaps created
><4>swsusp: Basic memory bitmaps freed
><4>Attempting manual resume
><6>usb 2-1: new device found, idVendor=1241, idProduct=1177
><6>usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 2-1: configuration #1 chosen from 1 choice
><6>usb 2-2: new low speed USB device using uhci_hcd and address 3
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda2, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>usb 2-2: new device found, idVendor=046a, idProduct=0001
><6>usb 2-2: new device strings: Mfr=1, Product=0, SerialNumber=0
><6>usb 2-2: Manufacturer: Cherry GmbH
><6>usb 2-2: configuration #1 chosen from 1 choice
><6>usbcore: registered new interface driver hiddev
><6>input: HID 1241:1177 as /class/input/input1
><6>input: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:1d.0-1
><6>input: Cherry GmbH as /class/input/input2
><6>input: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:1d.0-2
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><5>scsi 0:0:0:0: Attached scsi generic sg0 type 5
><5>sd 2:0:0:0: Attached scsi generic sg1 type 0
><5>sd 3:0:0:0: Attached scsi generic sg2 type 0
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>EDAC MC: Ver: 2.0.1 Feb 11 2008
><6>EDAC e7xxx: tolm = 40000, remapbase = ffc000, remaplimit = 0
><6>EDAC MC0: Giving out device to e7xxx_edac E7505: DEV 0000:00:00.0
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
><6>Linux agpgart interface v0.102 (c) Dave Jones
><4>rtc_cmos: probe of 00:04 failed with error -16
><6>gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 523kHz
><6>iTCO_vendor_support: vendor-support=0
><6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
><6>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x1060)
><6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
><3>intel_rng: FWH not detected
><6>input: Power Button (FF) as /class/input/input3
><6>ACPI: Power Button (FF) [PWRF]
><6>parport_pc 00:0c: reported by Plug and Play ACPI
><6>input: Power Button (CM) as /class/input/input4
><6>ACPI: Power Button (CM) [PWRB]
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
><6>Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
><6>Copyright (c) 1999-2007 Intel Corporation.
><6>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 16
><6>e1000: 0000:02:03.0: e1000_probe: (PCI:33MHz:32-bit) 00:e0:81:64:ab:f3
><4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 0:0:0:0: Attached scsi CD-ROM sr0
><6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
><6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 21
><6>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1f.5 to 64
><6>intel8x0_measure_ac97_clock: measured 52022 usecs
><6>intel8x0: clocking to 48000
><6>Adding 2104472k swap on /dev/sda1.  Priority:-1 extents:1 across:2104472k
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>loop: module loaded
><6>AppArmor: AppArmor initialized
><5>audit(1202933625.700:2):  type=1505 info="AppArmor initialized" pid=2140
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Wed Feb 13 20:13:35 2008
>
>Creating device nodes with udev
>Trying manual resume from /dev/sda1
>Invoking userspace resume from /dev/sda1
>resume: Could not stat configuration file
>resume: libgcrypt version: 1.2.4
>Trying manual resume from /dev/sda1
>Invoking in-kernel resume from /dev/sda1
>Waiting for device /dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 to appear:  ok
>fsck 1.40.2 (12-Jul-2007)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 
>/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2: clean, 164522/1311552 files, 956330/2622611 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Feb 13 21:13:42 2008
>
>done
>Starting udevd udevd-event[1765]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
>
>done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda2 is already mounted on /
>
>Activating device mapper...
>done
>Checking file systems...
>fsck 1.40.2 (12-Jul-2007)
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>nothing was mounted
>doneConfiguring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
>Configured serial ports
>doneActivating remaining swap-devices in /etc/fstab...
>doneMounting securityfs on /sys/kernel/security done
>Loading AppArmor module done
>Loading AppArmor profiles Setting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
><notice>killproc: kill(1149,29)
>Creating /var/log/boot.msg
>donedone
>Setting up the hardware clockdone
>Setting up hostname 'suse103'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>Can't determine current runlevel
>done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1149,3)
>
>INIT: 
>Boot logging started on /dev/tty1(/dev/console) at Wed Feb 13 20:13:49 2008
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Entering runlevel: 5
>
>
>Initializing random number generatordone
>Starting D-Bus daemonUnknown username "gdm" in message bus configuration file
>done
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Checking/updating CPU microcode done
>Starting resource managerdone
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/sbin/acpid ]
><notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>acpid: starting up
>
>
>Starting irqbalance done
>Starting acpid done
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>.Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>done
>Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>done
>Loading CPUFreq modules (CPUFreq not supported)
>Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>done
>Loading keymap i386/qwerty/us.map.gz
>doneLoading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneSetting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>done    eth0      device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
>    eth0      (DHCP) . . . . . <notice>pidofproc: dhcpcd 3402
><notice>killproc: kill(2492,20)
><notice>killproc: kill(2483,1)
><notice>killproc: kill(2492,18)
><notice>killproc: kill(2492,12)
>IP/Netmask: 10.31.220.52 / 255.0.0.0 
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
><notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/sbin/auditd ]
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting SSH daemondone
>Starting Name Service Cache Daemondone
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/sbin/portmap ]
>Starting RPC portmap daemondone
>Starting Avahi daemon.done
>Starting auditd done
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>Starting powersaved: done
>Starting service xdm<notice>startproc: execve (/usr/bin/xdm) [ /usr/bin/xdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg LANG=en_US.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME= WINDOWMANAGER=/usr/bin/twm splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/bin/xdm ]
>done
>Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>done
>Starting mail service (Postfix)done
>Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>done
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>done
>Starting smartd <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST380811AS_6PS22BHK-part2 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
>done
>Starting Firewall Initialization (phase 2 of 2) done
>done
>Master Resource Control: runlevel 5 has been reached
><notice>killproc: kill(2338,3)

Actions: View

Attachments on bug 157514: 72487 | 72488 | 72489 | 72490 | 72969 | 72970 | 194753 | 194754 | 194755