Attachment 210216 Details for Bug 368234

efika-usbstorage.txt

efika-usbstorage.txt (text/plain), 17.02 KB, created by Olaf Hering on 2008-04-24 14:08:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Olaf Hering

Created: 2008-04-24 14:08:38 UTC

Size: 17.02 KB

patch

obsolete

>EFIKA 5K2 Boot Strap [RELEASE BUILD] (c) 2002-2006 bplan GmbH (BUILD 20061101134833)
>Running on    CPU PVR: 0x80822014
>Running on system SVR: 0x80110022
>BIOS Code position: 0xFFF040D0
>Setup System Config...                                                 [32mDone.[0m
>Setup Memory Config...                                                 [32mDone.[0m
>Setup PCI...                                                           [32mDone.[0m
>Setup ATA...                                                           [32mDone.[0m
>Setup USB...                                                           [32mDone.[0m
>Setup ETH...                                                           [32mDone.[0m
>Memory Test skipped (Warmboot detected)
>cpu0: PowerPC,G2 CPUClock 396 Mhz BUSClock 132 Mhz (Version 0x8082,0x2014)
>channel 0 unit 0 :   ata | IBM-DJSA-205                             | JS1OAB0A
>ATA device not present or not responding
>Welcome to SmartFirmware(tm) for bplan EFIKA5K2
>Version 1.3 (20061107101950)
>SmartFirmware(tm) Copyright 1996-2001 by CodeGen, Inc.
>All Rights Reserved.
>Pegasos BIOS Extensions Copyright 2001-2006 by bplan GmbH.
>All Rights Reserved.
>Auto-boot in 5 seconds - press ESC to abort, ENTER to boot: Auto-boot in 5 seconds - press ESC to abort, ENTER to boot:        Auto-boot in 4 seconds - press ESC to abort, ENTER to boot:        Auto-boot in 3 seconds - press ESC to abort, ENTER to boot:        Auto-boot in 2 seconds - press ESC to abort, ENTER to boot:        Auto-boot in 1 seconds - press ESC to abort, ENTER to boot:        Auto-boot in 0 seconds - press ESC to abort, ENTER to boot:        
>/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- 
>yaboot starting: loaded at 00040000 00063250 (0/0/01003ed8; sp: 017ffe50)
>MAC for /builtin@F0000000/ethernet@F0003000: 00:0b:2f:e7:81:21
>MAC for /builtin@F0000000/ethernet@F0003000: 00:0b:2f:e7:81:21
>\|TFTP error 1: File not found
>method 'load' failed fffff29e
>download failed: 0
>MAC for /builtin@F0000000/ethernet@F0003000: 00:0b:2f:e7:81:21
>/-\R|R/yaboot downloaded 00001920 bytes via network
>Config file 'yaboot.conf' read, 6432 bytes
>
> yaboot from boettger.suse.de ... 
>Welcome to yaboot version 10.1.22-r1034.SuSE
>booted from '/builtin@F0000000/ethernet@F0003000:'
>Enter "help" to get some basic usage information
>boot: 11.0 debug
>MAC for /builtin@F0000000/ethernet@F0003000: 00:0b:2f:e7:81:21
>Please wait, loading kernel...
>-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\yaboot downloaded 00dbcc40 bytes via network
>Allocated 00f00000 bytes for executable @ 03a00000
>   Elf32 kernel loaded...
>
>SuSE Linux zImage starting: loaded at 03a00000-047b7cbc (40000/0/01003ed8; sp: 017ffbf0)
>uncompressing ELF header done. (00000100 bytes)
>Allocated 008544f0 bytes for kernel @ 02000000
>Allocated 00b6b3ce bytes for initrd @ 02855000
>uncompressing kernel done. (00502afc bytes)
>entering kernel at 02010000(2855000/b6b3ce/01003ed8)
>OF stdout device is: /failsafe
>command line: sysrq=1 start_shell nosshkey quiet install=nfs://dist.suse.de/dist/install/SLP/openSUSE-11.0-Beta1-DVD/ppc/DVD1 linuxrcstderr=/dev/console lxrcdbg=4  debug
>memory layout at init:
>  alloc_bottom : 033c1000
>  alloc_top    : 30000000
>  alloc_top_hi : f000c000
>  rmo_top      : 30000000
>  ram_top      : f000c000
>Looking for displays
>instantiating rtas at 0x07ffb000 ... done
>Applying EFIKA device tree fixups
>Fixing bestcomm interrupts property
>Adding sound interrupts property
>Adding Ethernet MDIO node
>Adding Ethernet PHY node
>copying OF device tree ...
>Building dt strings...
>Building dt structure...
>Device tree strings 0x033c2000 -> 0x033c2733
>Device tree struct  0x033c3000 -> 0x033c6000
>Calling quiesce ...
>returning from prom_init
>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
>High memory: 0k
>Memory: 112552k/131072k available (4792k kernel code, 18356k reserved, 164k data, 461k bss, 228k init)
>Calibrating delay loop... 65.79 BogoMIPS (lpj=131584)
>Security Framework initialized
>AppArmor: AppArmor initialized
>AppArmor: Unable to log event (1505) to audit subsys
>AppArmor: Registered secondary security module name="capability"
>AppArmor: Unable to log event (1505) to audit subsys
>Capability LSM initialized as secondary
>Failure registering Root Plug module with the kernel
>AppArmor: Unable to register %s as a secondary security module name="root_plug"
>AppArmor: Unable to log event (1505) to audit subsys
>Failure registering Root Plug  module with primary security module.
>Mount-cache hash table entries: 512
>net_namespace: 540 bytes
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>DMA: MPC52xx BestComm driver
>DMA: MPC52xx BestComm engine @f0001200 ok !
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>NET: Registered protocol family 2
>Switched to high resolution mode on CPU 0
>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
>TCP: Hash tables configured (established 4096 bind 4096)
>TCP reno registered
>Unpacking initramfs... done
>Freeing initrd memory: 11692k freed
>Thermal assist unit not available
>audit: initializing netlink socket (disabled)
>type=2000 audit(1209045576.512:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Generic RTC Driver v1.07
>Macintosh non-volatile memory driver v1.1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>Serial: MPC52xx PSC UART driver
>f0002000.serial: ttyPSC0 at MMIO 0xf0002000 (irq = 129) is a MPC52xx PSC
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>apm_emu: PMU APM Emulation initialized.
>Uniform Multi-Platform E-IDE driver
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ppc-of-ohci f0001000.usb: OF OHCI
>ppc-of-ohci f0001000.usb: new USB bus registered, assigned bus number 1
>ppc-of-ohci f0001000.usb: irq 134, io mem 0xf0001000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OF OHCI
>usb usb1: Manufacturer: Linux 2.6.25-rc9-17-default ohci_hcd
>usb usb1: SerialNumber: PPC-OF USB
>mice: PS/2 mouse device common for all mice
>EDAC MC: Ver: 2.1.0 Apr 17 2008
>usb 1-2: new full speed USB device using ppc-of-ohci and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=0324, idProduct=bc06
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: RALLY2
>usb 1-2: Manufacturer: OCZ Technology
>usb 1-2: SerialNumber: AA04012700041653
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>registered taskstats version 1
>Freeing unused kernel memory: 228k init
>Moving into tmpfs... done.
>
>
>>>> openSUSE installation program v3.1.17 (c) 1996-2008 SUSE Linux Products GmbH <<<
>
>Starting udev... ok
>Remount of / ok
>Console: /dev/ttyPSC0, serial line params "ttyPSC0"
>error setting kbd mode: Invalid argument
>CPU: 0, Memory: 91404
>Loading basic drivers...insmod /modules/sunrpc.ko
>insmod /modules/lockd.ko
>insmod /modules/nfs_acl.ko
>insmod /modules/nfs.ko
>insmod /modules/loop.ko 'max_loop=64'
>insmod /modules/crypto_blkcipher.ko
>insmod /modules/ecb.ko
>insmod /modules/arc4.ko
> ok
>Setting up localhost...done
>Starting hardware detection...
>Starting hardware detection... ok
>Hardware detection finished.
>(If a driver is not working for you, try booting with brokenmodules=driver_name.)
>
>Freescale mpc5200 SATA 0
>  drivers: pata_mpc52xx
>  loading pata_mpc52xxinsmod /modules/libata.ko
>insmod /modules/pata_mpc52xx.ko
>
>Activating ieee1394 devices...insmod /modules/ieee1394.ko
>insmod /modules/sbp2.ko
> ok
>Freescale mpc5200 Ethernet 0
>  drivers: fec_mpc52xx
>  loading fec_mpc52xxinsmod /modules/bestcomm-fec.ko
>insmod /modules/libphy.ko
>insmod /modules/fec_mpc52xx_phy.ko
>insmod /modules/fec_mpc52xx.ko
>
>scanning devices
>repository: looking for nfs://dist.suse.de/dist/install/SLP/openSUSE-11.0-Beta1-DVD/ppc/DVD1
>url mount: trying nfs://dist.suse.de/dist/install/SLP/openSUSE-11.0-Beta1-DVD/ppc/DVD1?device=eth0
>(Freescale mpc5200 Ethernet 0)
>interface setup: eth0
>Sending DHCP request to eth0...
>sending DHCP request to eth0... ok.
>eth0 activated
>hostip: 10.10.4.114/16
>gateway: 10.10.0.8
>nameserver 0: 10.10.2.88
>nameserver 1: 10.10.0.1
>nameserver 2: 149.44.160.146
>dns: dist.suse.de is 10.10.0.100
>nfs: /dist/install/SLP/openSUSE-11.0-Beta1-DVD/ppc/DVD1 -> /var/adm/mount (0)
>loading file:/var/adm/mount/content -> /content
>sha1 9bcb6bd16bb612dcc2b9ae48d59625451d6496a8
>sha1 not checked
>loading file:/var/adm/mount/content.asc -> /content.asc
>sha1 cae337c866832b8a678969afbf83bfb654b846dc
>sha1 not checked
>signature ok
>mount /var/adm/mount/boot/ppc/common -> /mounts/mp_0000
>insmod /modules/squashfs.ko
>mount: /var/adm/mount/boot/ppc/common: we need a loop device
>mount: using /dev/loop0
>mount /var/adm/mount/boot/ppc/root -> /mounts/mp_0001
>mount: /var/adm/mount/boot/ppc/root: we need a loop device
>mount: using /dev/loop1
>mount /var/adm/mount/boot/ppc/cracklib-dict-full.rpm -> /mounts/mp_0002
>/var/adm/mount/boot/ppc/cracklib-dict-full.rpm -> /download/file_0001: converting to squashfs
>[«¹Ñé /download/file_0001: we need a loop device
>mount: using /dev/loop2
>mount /var/adm/mount/boot/ppc/yast2-trans-en_US.rpm -> /mounts/mp_0003
>/var/adm/mount/boot/ppc/yast2-trans-en_US.rpm -> /download/file_0003: converting to squashfs
>mount: /download/file_0003: we need a loop device
>mount: using /dev/loop3
>url mount: nfs://dist.suse.de/dist/install/SLP/openSUSE-11.0-Beta1-DVD/ppc/DVD1?device=eth0 @ /var/adm/mount
>repository: using nfs://dist.suse.de/dist/install/SLP/openSUSE-11.0-Beta1-DVD/ppc/DVD1?device=eth0 @ /var/adm/mount
>loading file:/var/adm/mount/media.1/info.txt -> /info.txt
>sha1 0d78a8d7c21a062f16b1ce37704609e6611406e4
>sha1 ok
>loading file:/var/adm/mount/license.tar.gz -> /license.tar.gz
>sha1 388b86f55bd7a57c12097b6071f4755fa5670788
>sha1 ok
>loading file:/var/adm/mount/part.info -> /part.info
>error 37: Couldn't open file /var/adm/mount/part.info
>loading file:/var/adm/mount/control.xml -> /control.xml
>sha1 7ed3bc9ed4fc61151ef049c9cea1067127e00163
>sha1 ok
>loading file:/var/adm/mount/driverupdate -> /download/file_0004
>error 37: Couldn't open file /var/adm/mount/driverupdate
>No new driver updates found.
>
>To continue, activate some swap space.
>
>1) sda1 (2.0 GB, swap)                
>2) create swap partition              
>3) create swap file                   
>
>> 1
>swapon /dev/sda1
>
>
>starting setctsid `showconsole` inst_setup yast
>starting hald... ok
>starting syslogd (logging to /dev/tty4)... ok
>starting klogd... ok
>
>ATTENTION: Starting shell... (use 'exit' to proceed)
>Welcome to the inst-sys on 10.10.4.114 2.6.25-rc9-17-default ppc
>inst-sys:/ # hwinfo --usb
>                                                                > hal.1: read hal data                                                                > sys.1: cpu                                                                > sys.2: assign udi                                                                > hal.1: read hal data                                                                > sys.1: cpu                                                                > block.1: block modules                                                                > block.2: sysfs drivers                                                                > block.3: cdrom                                                                > block.4: partition                                                                > block.5: get sysfs block dev data                                                                > block.5: /dev/sda                                                                > block.5.1: /dev/sda geo                                                                > block.5.2: /dev/sda serial                                                                > scsi.1: scsi modules                                                                > scsi.2: scsi tape                                                                > scsi.3: scsi generic                                                                > usb.1: sysfs drivers                                                                > usb.2: usb                                                                > usb.3.1: joydev mod                                                                > usb.3.2: evdev mod                                                                > usb.3.3: input                                                                > usb.3.4: lp                                                                > usb.3.5: serial                                                                > input.1: joydev mod                                                                > input.1.1: evdev mod                                                                > input.2: input                                                                > net.1: get network data                                                                > net.2: assign udi                                                                > isdn.1: list                                                                > dsl.1: list                                                                > int.2: cdrom                                                                > int.3: media                                                                > int.4.1: /dev/sda                                                                > int.4: floppy                                                                > int.6: mouse                                                                > int.7: hdb                                                                > int.7.1: modules                                                                > int.8: usbscsi                                                                > int.9: hotplug                                                                > int.10: modem                                                                > int.11: wlan                                                                > int.12: udev                                                                > int.13: device names                                                                > int.16: parent                                                                04: USB 00.0: 10600 Disk
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_324_bc06_AA04012700041653_if0
>  Unique ID: mQbf.1jgKp33wQcE
>  Parent ID: u9LK.nUU7fp8MYPA
>  SysFS ID: /devices/f0000000.builtin/f0001000.usb/usb1/1-2/1-2:1.0
>  SysFS BusID: 1-2:1.0
>  Hardware Class: disk
>  Model: "OCZ RALLY2"
>  Hotplug: USB
>  Vendor: usb 0x0324 "OCZ Technology"
>  Device: usb 0xbc06 "RALLY2"
>  Revision: "11.00"
>  Serial ID: "AA04012700041653"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0324pBC06d1100dc00dsc00dp00ic08isc06ip50"
>  Driver Info #0:
>    Driver Status: usb_storage is not active
>    Driver Activation Cmd: "modprobe usb_storage"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #5 (Hub)
>
>05: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_1d6b_1_PPC_OF_USB_if0
>  Unique ID: u9LK.nUU7fp8MYPA
>  SysFS ID: /devices/f0000000.builtin/f0001000.usb/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.25-rc9-17-default ohci_hcd OF OHCI"
>  Hotplug: USB
>  Vendor: usb 0x1d6b "Linux 2.6.25-rc9-17-default ohci_hcd"
>  Device: usb 0x0001 "OF OHCI"
>  Revision: "2.06"
>  Serial ID: "PPC-OF USB"
>  Driver: "hub"
>  Driver Modules: "usbcore"
>  Speed: 12 Mbps
>  Module Alias: "usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>inst-sys:/ #

Actions: View

Attachments on bug 368234: 210216