Attachment 211555 Details for Bug 374307

dmesg.txt

dmesg.txt (text/plain), 31.64 KB, created by Casual J. Programmer on 2008-04-30 15:13:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Casual J. Programmer

Created: 2008-04-30 15:13:52 UTC

Size: 31.64 KB

patch

obsolete

>Linux version 2.6.25-19-pae (geeko@buildhost) (gcc version 4.3.1 20080409 (prerelease) [gcc-4_3-branch revision 134138] (SUSE Linux) ) #1 SMP 2008-04-22 17:29:12 +0200
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
> BIOS-e820: 000000007f690000 - 000000007f700000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>1142MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00f7640] 000f7640
>NX (Execute Disable) protection: active
>Entering add_active_range(0, 0, 521872) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   521872
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   521872
>On node 0 totalpages: 521872
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2285 pages used for memmap
>  HighMem zone: 290211 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F7500, 0014 (r0 PTLTD )
>ACPI: RSDT 7F691C1A, 0044 (r1 FSC    PC       20070126  LTP        0)
>ACPI: FACP 7F697CAA, 0074 (r1 FUJ___ DW1_____ 20070126 LOHR       5A)
>ACPI: DSDT 7F692626, 5684 (r1 FUJ___ DW1_____ 20070126 MSFT  100000E)
>ACPI: FACS 7F698FC0, 0040
>ACPI: APIC 7F697D1E, 0068 (r1 FUJ___ DW1_____ 20070126 LOHR       5A)
>ACPI: HPET 7F697D86, 0038 (r1 FUJ___ DW1_____ 20070126 LOHR       5A)
>ACPI: MCFG 7F697DBE, 003C (r1 FUJ___ DW1_____ 20070126 LOHR       5A)
>ACPI: APIC 7F697DFA, 0068 (r1 FUJ___ DW1_____ 20070126  LTP        0)
>ACPI: BOOT 7F697E62, 0028 (r1 FUJ___ DW1_____ 20070126  LTP        1)
>ACPI: SLIC 7F697E8A, 0176 (r1 FSC    PC       20070126  LTP        0)
>ACPI: SSDT 7F691C5E, 0500 (r1  PmRef    CpuPm     3000 INTL 20050228)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: DMI detected: Fujitsu Siemens
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517795
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHV2080_NW78T662BLKF-part4 vga=0x314 resume=/dev/sda3 splash=silent elevator=cfq
>bootsplash: silent mode.
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.840 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2060172k/2087488k available (1955k kernel code, 26048k reserved, 1678k data, 264k init, 1169984k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xff8b2000 - 0xfffff000   (7476 kB)
>    pkmap   : 0xff400000 - 0xff600000   (2048 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0495000 - 0xc04d7000   ( 264 kB)
>      .data : 0xc02e8c4a - 0xc048c784   (1678 kB)
>      .text : 0xc0100000 - 0xc02e8c4a   (1955 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3996.08 BogoMIPS (lpj=7992166)
>Security Framework initialized
>AppArmor: AppArmor initialized <NULL>
>AppArmor: Registered secondary security module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 862 Objects with 84 Devices 184 Methods 21 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 13 Objects with 0 Devices 4 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>CPU0: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>Booting processor 1/1 ip 4000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3991.53 BogoMIPS (lpj=7983072)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>Total of 2 processors activated (7987.61 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>APIC calibration not consistent with PM Timer: 175ms instead of 100ms
>APIC delta adjusted to PM-Timer: 1039444 (1829401)
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1
>Setting up standard PCI resources
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:...............................................
>Initialized 17/21 Regions 0/0 Fields 20/20 Buffers 10/22 Packages (884 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI
>..
>Executed 2 _INI methods requiring 0 _STA executions (examined 89 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>AppArmor: AppArmor Filesystem Enabled 
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
>system 00:05: ioport range 0x800-0x80f has been reserved
>system 00:05: ioport range 0x1000-0x107f has been reserved
>system 00:05: ioport range 0x1180-0x11bf has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: 0xda000000-0xdbffffff
>  PREFETCH window: 0x00000000d4000000-0x00000000d5ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: 0xd6000000-0xd7ffffff
>  PREFETCH window: 0x00000000d0000000-0x00000000d1ffffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 4000-4fff
>  MEM window: 0xd8000000-0xd9ffffff
>  PREFETCH window: 0x00000000d2000000-0x00000000d3ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: 0xdc000000-0xdc0fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Unpacking initramfs...<7>Switched to high resolution mode on CPU 1
> done
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 4318k freed
>Simple Boot Flag value 0x82 read from CMOS RAM was invalid
>Simple Boot Flag at 0x36 set to 0x1
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1209553422.504:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pci 0000:07:08.0: Firmware left e100 interrupts enabled; disabling
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3750k, total 7872k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 78734 bytes
>bootsplash: ...found (800x600, 27773 bytes, v3).
>Console: switching to colour frame buffer device 96x33
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>floppy0: no floppy controllers found
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2F] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>input: PC Speaker as /devices/platform/pcspkr/input/input1
>Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 264k freed
>Write protecting the kernel read-only data: 1436k
>ACPI: SSDT 7F6923B3, 01EA (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
>Parsing all Control Methods:
>Table [SSDT](id 0020) - 5 Objects with 0 Devices 3 Methods 0 Regions
>ACPI: SSDT 7F69215E, 01D0 (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
>Parsing all Control Methods:
>Table [SSDT](id 0021) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F69259D, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
>Parsing all Control Methods:
>Table [SSDT](id 0026) - 3 Objects with 0 Devices 3 Methods 0 Regions
>ACPI: SSDT 7F69232E, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050228)
>Parsing all Control Methods:
>Table [SSDT](id 0027) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to: TSC halts in idle.
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (60 C)
>ACPI: ACPI Dock Station Driver 
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>Clocksource tsc unstable (delta = -201266931 ns)
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xdc444400 port 0xdc444500 irq 220
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m1024@0xdc444400 port 0xdc444600 irq 220
>ata4: DUMMY
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: FUJITSU MHV2080BH, 00000025, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080B 0000 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>ata5.00: ATAPI: _NEC DVD_RW ND-6750A, 2.42, max UDMA/33
>ata5.00: configured for UDMA/33
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            _NEC     DVD_RW ND-6750A  2.42 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v3.0
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-19-pae ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-19-pae uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-19-pae uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=0766, idProduct=0012
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: Storagebird XL-E
>usb 1-2: Manufacturer: Fujitsu Siemens Computers
>usb 1-2: SerialNumber: S07F1601A00000210520
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-19-pae uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-19-pae uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>PM: Starting manual resume from disk
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: New USB device found, idVendor=045e, idProduct=007d
>usb 3-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
>usb 3-1: Product: Microsoft 3-Button Mouse with IntelliEye?
>usb 3-1: Manufacturer: Microsoft
>usb 3-2: new full speed USB device using uhci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice
>hub 3-2:1.0: USB hub found
>hub 3-2:1.0: 4 ports detected
>usb 3-2: New USB device found, idVendor=03eb, idProduct=3301
>usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 3-2: Product: Standard USB Hub
>usb 3-2.2: new full speed USB device using uhci_hcd and address 4
>usb 3-2.2: configuration #1 chosen from 1 choice
>usb 3-2.2: New USB device found, idVendor=067b, idProduct=2303
>usb 3-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 3-2.3: new full speed USB device using uhci_hcd and address 5
>usb 3-2.3: configuration #1 chosen from 1 choice
>usb 3-2.3: New USB device found, idVendor=04a9, idProduct=1093
>usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 3-2.3: Product: iP4000
>usb 3-2.3: Manufacturer: Canon
>usb 3-2.3: SerialNumber: 111A09
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>iTCO_vendor_support: vendor-support=0
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1093
>usbcore: registered new interface driver usblp
>ACPI: AC Adapter [ACAD] (on-line)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Battery Slot [BAT1] (battery present)
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:07:09.2 [1180:0843] (rev 1)
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ricoh-mmc: Controller is now disabled.
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
>ACPI: Lid Switch [LID]
>scsi 6:0:0:0: Direct-Access     Ext Hard  Disk                 PQ: 0 ANSI: 4
>sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 10 00 00 00
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
>sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 10 00 00 00
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
> sdb:<6>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
> sdb1
>sd 6:0:0:0: [sdb] Attached SCSI disk
>sd 6:0:0:0: Attached scsi generic sg2 type 0
>sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 19)
>PCI: Enabling device 0000:07:09.1 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 21
>usb-storage: device scan complete
>sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
>PCI: Setting latency timer of device 0000:07:09.1 to 64
>mmc0: SDHCI at 0xdc001800 irq 21 DMA
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/input/input8
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>mmc0: new SD card at address b368
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:07:08.0 to 64
>e100: eth0: e100_probe: addr 0xdc000000, irq 20, MAC addr 00:16:36:34:25:66
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef]
>ACPI: Device needs an ACPI driver
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>usbcore: registered new interface driver hiddev
>PCI: Enabling device 0000:07:09.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:07:09.0 to 64
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[dc001000-dc0017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb-0000:00:1d.1-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
>pl2303 3-2.2:1.0: pl2303 converter detected
>mmcblk0: mmc0:b368       4020224KiB 
> mmcblk0:
>usb 3-2.2: pl2303 converter now attached to ttyUSB0
>usbcore: registered new interface driver pl2303
>drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
>ACPI: PCI interrupt for device 0000:01:00.0 disabled
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>wmaster0 renamed to wmaster0_rename
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f00008ffd54]
>Adding 4200988k swap on /dev/sda3.  Priority:-1 extents:1 across:4200988k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>loop: module loaded
>fuse init (API version 7.9)
>type=1505 audit(1209553471.004:2): operation="profile_load" name="/bin/ping" name2="default" pid=1712
>type=1505 audit(1209553471.024:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1719
>type=1505 audit(1209553471.073:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1722
>type=1505 audit(1209553471.112:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1723
>type=1505 audit(1209553471.156:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1724
>type=1505 audit(1209553471.192:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1734
>type=1505 audit(1209553471.229:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1742
>type=1505 audit(1209553471.292:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1750
>type=1505 audit(1209553471.341:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1775
>type=1505 audit(1209553471.396:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1776
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100002, writing 100006)
>NET: Registered protocol family 17
>ACPI: PCI interrupt for device 0000:01:00.0 disabled
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>powernow: This module only works with AMD K7 CPUs
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100002, writing 100006)
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:04:0e:a4:4f:a7
>wlan0: RX authentication from 00:04:0e:a4:4f:a7 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:04:0e:a4:4f:a7
>wlan0: RX AssocResp from 00:04:0e:a4:4f:a7 (capab=0x451 status=0 aid=1)
>wlan0: associated
>padlock: VIA PadLock not detected.
>warning: `ntpd' uses 32-bit capabilities (legacy support in use)
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>powersaved[4458]: segfault at 1 ip b7eb352b sp bf951f08 error 4 in libdbus-1.so.3.4.0[b7e8b000+36000]

Actions: View

Attachments on bug 374307: 210798 | 211555