Bugzilla – Attachment 213992 Details for
Bug 384150
ata errors causing hang in Yast
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
dmesg output after disabling hal for sr0
dmesg2.log (text/x-log), 42.51 KB, created by
Andras Mantia
on 2008-05-09 14:54:22 UTC
(
hide
)
Description:
dmesg output after disabling hal for sr0
Filename:
MIME Type:
Creator:
Andras Mantia
Created:
2008-05-09 14:54:22 UTC
Size:
42.51 KB
patch
obsolete
>Linux version 2.6.25-26-default (geeko@buildhost) (gcc version 4.3.1 20080425 (prerelease) [gcc-4_3-branch revision 134659] (SUSE Linux) ) #1 SMP 2008-04-30 07:56:05 +0200 >Command line: root=/dev/disk/by-id/scsi-SATA_ST3250620AS_9QE06NM6-part2 resume=/dev/disk/by-id/scsi-SATA_ST3250620AS_9QE06NM6-part6 splash=silent vga=0x317 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) > BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) > BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) > BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) > BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) >Entering add_active_range(0, 0, 159) 0 entries of 3200 used >Entering add_active_range(0, 256, 524208) 1 entries of 3200 used >end_pfn_map = 1048576 >DMI 2.3 present. >ACPI: RSDP 000FA7C0, 0021 (r2 ACPIAM) >ACPI: XSDT 7FFB0100, 003C (r1 A M I OEMXSDT 12000530 MSFT 97) >ACPI: FACP 7FFB0290, 00F4 (r3 A M I OEMFACP 12000530 MSFT 97) >ACPI: DSDT 7FFB03F0, 3A3E (r1 A0036 A0036001 1 MSFT 100000D) >ACPI: FACS 7FFC0000, 0040 >ACPI: APIC 7FFB0390, 0052 (r1 A M I OEMAPIC 12000530 MSFT 97) >ACPI: OEMB 7FFC0040, 003F (r1 A M I OEMBIOS 12000530 MSFT 97) >Scanning NUMA topology in Northbridge 24 >No NUMA configuration found >Faking a node at 0000000000000000-000000007ffb0000 >Entering add_active_range(0, 0, 159) 0 entries of 3200 used >Entering add_active_range(0, 256, 524208) 1 entries of 3200 used >Bootmem setup node 0 0000000000000000-000000007ffb0000 > NODE_DATA [000000000000c000 - 0000000000013fff] > bootmap [0000000000014000 - 0000000000023ff7] pages 10 >early res: 0 [0-fff] BIOS data page >early res: 1 [6000-7fff] SMP_TRAMPOLINE >early res: 2 [200000-8b6bd7] TEXT DATA BSS >early res: 3 [37b69000-37fefb42] RAMDISK >early res: 4 [9fc00-a0bff] EBDA >early res: 5 [8000-bfff] PGTABLE > [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 > [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 > [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 > [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 > [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 > [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 > [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 > [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 > [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 > [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 > [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 > [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 > [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 > [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 >Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 >Movable zone start PFN for each node >early_node_map[2] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 524208 >On node 0 totalpages: 524111 > DMA zone: 56 pages used for memmap > DMA zone: 1728 pages reserved > DMA zone: 2215 pages, LIFO batch:0 > DMA32 zone: 7110 pages used for memmap > DMA32 zone: 513002 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap >Detected use of extended apic ids on hypertransport bus >ACPI: PM-Timer IO Port: 0x808 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >Processor #0 (Bootup-CPU) >ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >Processor #1 >ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Setting APIC routing to flat >Using ACPI (MADT) for SMP configuration information >PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 >PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 >PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 >Allocating PCI resources starting at 88000000 (gap: 80000000:7f780000) >SMP: Allowing 2 CPUs, 0 hotplug CPUs >PERCPU: Allocating 50608 bytes of per cpu data >Built 1 zonelists in Node order, mobility grouping on. Total pages: 515217 >Policy zone: DMA32 >Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST3250620AS_9QE06NM6-part2 resume=/dev/disk/by-id/scsi-SATA_ST3250620AS_9QE06NM6-part6 splash=silent vga=0x317 >bootsplash: silent mode. >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 32768 bytes) >Extended CMOS year: 2000 >TSC calibrated against PM_TIMER >Marking TSC unstable due to TSCs unsynchronized >time.c: Detected 2403.065 MHz processor. >Console: colour dummy device 80x25 >console [tty0] enabled >Checking aperture... >Node 0: aperture @ d8000000 size 64 MB >Memory: 2055916k/2096832k available (2368k kernel code, 40528k reserved, 1918k data, 404k init) >CPA: page pool initialized 1 of 1 pages preallocated >Calibrating delay using timer specific routine.. 4812.07 BogoMIPS (lpj=9624156) >Security Framework initialized >AppArmor: AppArmor initialized <NULL> >AppArmor: Registered secondary security module capability >Capability LSM initialized as secondary >Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) >Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) >Mount-cache hash table entries: 256 >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 1024K (64 bytes/line) >CPU 0/0 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 0 >ACPI: Core revision 20070126 >Parsing all Control Methods: >Table [DSDT](id 0001) - 557 Objects with 51 Devices 147 Methods 25 Regions > tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired >evxfevnt-0091 [00] enable : Transition to ACPI mode successful >Using local APIC timer interrupts. >APIC timer calibration result 12515970 >Detected 12.515 MHz APIC timer. >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4806.14 BogoMIPS (lpj=9612285) >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 1024K (64 bytes/line) >CPU 1/1 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >Dual Core AMD Opteron(tm) Processor 180 stepping 02 >Brought up 2 CPUs >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >net_namespace: 1016 bytes >Booting paravirtualized kernel on bare hardware >NET: Registered protocol family 16 >ACPI: bus type pci registered >PCI: Using configuration type 1 >evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 >evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block >ACPI: EC: Look up EC in DSDT >Completing Region/Field/Buffer/Package initialization:.................................................................................................................................. >Initialized 21/25 Regions 44/44 Fields 51/51 Buffers 14/16 Packages (566 nodes) >Initializing Device/Processor/Thermal objects by executing _INI methods: >Executed 0 _INI methods requiring 0 _STA executions (examined 55 objects) >ACPI: Interpreter enabled >ACPI: (supports S0 S1 S3 S4 S5) >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (0000:00) >pci 0000:00:11.0: Enabled onboard AC97/MC97 devices >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) >ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) >ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. >ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 8B, should be 7E [20070126] >Linux Plug and Play Support v0.97 (c) Adam Belay >pnp: PnP ACPI init >ACPI: bus type pnp registered >pnp: PnP ACPI: found 14 devices >ACPI: ACPI bus type pnp unregistered >PCI: Using ACPI for IRQ routing >PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >PCI: Cannot allocate resource region 0 of device 0000:00:00.0 >agpgart: Detected AGP bridge 0 >agpgart: AGP aperture is 64M @ 0xd8000000 >AppArmor: AppArmor Filesystem Enabled >ACPI: RTC can wake from S4 >system 00:09: ioport range 0x680-0x6ff has been reserved >system 00:09: ioport range 0x290-0x297 has been reserved >system 00:0a: ioport range 0x3e1-0x3e7 has been reserved >system 00:0a: ioport range 0x4d0-0x4d1 has been reserved >system 00:0a: ioport range 0x800-0x87f has been reserved >system 00:0a: ioport range 0x400-0x41f has been reserved >system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved >system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved >system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved >system 00:0d: iomem range 0x0-0x9ffff could not be reserved >system 00:0d: iomem range 0xc0000-0xdffff has been reserved >system 00:0d: iomem range 0xe0000-0xfffff could not be reserved >system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved >system 00:0d: iomem range 0x0-0x0 could not be reserved >PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: 0xf9f00000-0xfbffffff > PREFETCH window: 0x00000000e0000000-0x00000000f8ffffff >PCI: Setting latency timer of device 0000:00:01.0 to 64 >NET: Registered protocol family 2 >Switched to high resolution mode on CPU 0 >Switched to high resolution mode on CPU 1 >IP route cache hash table entries: 65536 (order: 7, 524288 bytes) >TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >TCP: Hash tables configured (established 262144 bind 65536) >TCP reno registered >Unpacking initramfs... done >Freeing initrd memory: 4634k freed >audit: initializing netlink socket (disabled) >type=2000 audit(1210354860.464:1): initialized >Total HugeTLB memory allocated, 0 >VFS: Disk quotas dquot_6.5.1 >Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered >io scheduler cfq registered (default) >PCI: VIA PCI bridge detected. Disabling DAC. >pci 0000:01:00.0: Boot video device >vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000900000, using 6144k, total 262144k >vesafb: mode is 1024x768x16, linelength=2048, pages=1 >vesafb: scrolling: redraw >vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >bootsplash 3.1.6-2004/03/31: looking for picture... >bootsplash: silentjpeg size 78436 bytes >bootsplash: ...found (1024x768, 28133 bytes, v3). >Console: switching to colour frame buffer device 124x44 >fb0: VESA VGA frame buffer device >Non-volatile memory driver v1.2 >Linux agpgart interface v0.103 >Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled >serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >serio: i8042 AUX port at 0x60,0x64 irq 12 >mice: PS/2 mouse device common for all mice >input: PC Speaker as /devices/platform/pcspkr/input/input0 >input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 >cpuidle: using governor ladder >cpuidle: using governor menu >NET: Registered protocol family 1 >registered taskstats version 1 >Freeing unused kernel memory: 404k freed >Write protecting the kernel read-only data: 1680k >ACPI: ACPI0007:00 is registered as cooling_device0 >ACPI: ACPI0007:01 is registered as cooling_device1 >No dock devices found. >SCSI subsystem initialized >libata version 3.00 loaded. >pata_via 0000:00:0f.1: version 0.3.3 >ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 >scsi0 : pata_via >scsi1 : pata_via >ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 >ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 >input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2 >ata1.00: ATAPI: JLMS XJ-HD163, GH5S, max UDMA/33 >ata1.00: configured for UDMA/33 >scsi 0:0:0:0: CD-ROM JLMS XJ-HD163 GH5S PQ: 0 ANSI: 5 >sata_via 0000:00:0f.0: version 2.3 >ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 >sata_via 0000:00:0f.0: routed to hard irq line 10 >scsi2 : sata_via >scsi3 : sata_via >ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd000 bmdma 0xc000 irq 20 >ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xc008 irq 20 >ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata3.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133 >ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) >ata3.00: configured for UDMA/133 >ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100 >ata4.00: configured for UDMA/100 >scsi 2:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5 >scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5 >BIOS EDD facility v0.16 2004-Jun-25, 6 devices found >Driver 'sd' needs updating - please use bus_type methods >sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) >sd 2:0:0:0: [sda] Write Protect is off >sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) >sd 2:0:0:0: [sda] Write Protect is off >sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda:<6>usbcore: registered new interface driver usbfs >usbcore: registered new interface driver hub > sda1 sda2 sda3 <<6>usbcore: registered new device driver usb > sda5<6>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 > sda6<6>ehci_hcd 0000:00:10.4: EHCI Host Controller > sda7 ><6>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 >ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9e00000 >ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >usb usb1: configuration #1 chosen from 1 choice >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 8 ports detected > >USB Universal Host Controller Interface driver v3.0 >sd 2:0:0:0: [sda] Attached SCSI disk >usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 >usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb1: Product: EHCI Host Controller >usb usb1: Manufacturer: Linux 2.6.25-26-default ehci_hcd >usb usb1: SerialNumber: 0000:00:10.4 >ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 >uhci_hcd 0000:00:10.0: UHCI Host Controller >uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 >uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800 >usb usb2: configuration #1 chosen from 1 choice >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 2 ports detected >usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb2: Product: UHCI Host Controller >usb usb2: Manufacturer: Linux 2.6.25-26-default uhci_hcd >usb usb2: SerialNumber: 0000:00:10.0 >ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 >usb 1-4: new high speed USB device using ehci_hcd and address 2 >uhci_hcd 0000:00:10.1: UHCI Host Controller >uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 >uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e000 >usb usb3: configuration #1 chosen from 1 choice >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 2 ports detected >usb 1-4: configuration #1 chosen from 1 choice >usb 1-4: New USB device found, idVendor=05e3, idProduct=0710 >usb 1-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5 >usb 1-4: Product: USB Care Reader >usb 1-4: Manufacturer: Generic >usb 1-4: SerialNumber: 000232 >usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb3: Product: UHCI Host Controller >usb usb3: Manufacturer: Linux 2.6.25-26-default uhci_hcd >usb usb3: SerialNumber: 0000:00:10.1 >ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 >uhci_hcd 0000:00:10.2: UHCI Host Controller >uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 >uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e400 >usb usb4: configuration #1 chosen from 1 choice >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 2 ports detected >usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb4: Product: UHCI Host Controller >usb usb4: Manufacturer: Linux 2.6.25-26-default uhci_hcd >usb usb4: SerialNumber: 0000:00:10.2 >ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 >uhci_hcd 0000:00:10.3: UHCI Host Controller >uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 >uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e800 >usb usb5: configuration #1 chosen from 1 choice >hub 5-0:1.0: USB hub found >hub 5-0:1.0: 2 ports detected >usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb5: Product: UHCI Host Controller >usb usb5: Manufacturer: Linux 2.6.25-26-default uhci_hcd >usb usb5: SerialNumber: 0000:00:10.3 >PM: Starting manual resume from disk >REISERFS (device sda2): found reiserfs format "3.6" with standard journal >REISERFS (device sda2): using ordered data mode >REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >REISERFS (device sda2): checking transaction log (sda2) >REISERFS (device sda2): Using r5 hash to sort names >REISERFS (device sda2): Removing [1900902 916239 0x0 SD]..done >REISERFS (device sda2): Removing [1696712 358228 0x0 SD]..done >REISERFS (device sda2): Removing [41783 90843 0x0 SD]..done >REISERFS (device sda2): There were 3 uncompleted unlinks/truncates. Completed >ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 >PCI: Disallowing DAC for device 0000:00:0a.0 >skge 1.13 addr 0xf9c00000 irq 17 chip Yukon-Lite rev 9 >skge eth0: addr 00:13:d4:aa:99:5f >scsi 0:0:0:0: Attached scsi generic sg0 type 5 >sd 2:0:0:0: Attached scsi generic sg1 type 0 >scsi 3:0:0:0: Attached scsi generic sg2 type 5 >Driver 'sr' needs updating - please use bus_type methods >sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray >Uniform CD-ROM driver Revision: 3.20 >sr 0:0:0:0: Attached scsi CD-ROM sr0 >sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray >sr 3:0:0:0: Attached scsi CD-ROM sr1 >Floppy drive(s): fd0 is 1.44M >FDC 0 is a post-1991 82077 >end_request: I/O error, dev fd0, sector 0 >pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 >ACPI: Power Button (FF) [PWRF] >input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 >ACPI: Power Button (CM) [PWRB] >input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 >Initializing USB Mass Storage driver... >scsi4 : SCSI emulation for USB Mass Storage devices >usbcore: registered new interface driver usb-storage >usb-storage: device found at 2 >usb-storage: waiting for device to settle before scanning >USB Mass Storage support registered. >gameport: EMU10K1 is pci0000:00:0d.1/gameport0, io 0xb400, speed 1173kHz >shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 >ACPI: Sleep Button (CM) [SLPB] >ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 >ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f9a00000-f9a007ff] Max Packet=[2048] IR/IT contexts=[4/8] >rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 >rtc0: alarms up to one year, y3k >parport_pc 00:08: reported by Plug and Play ACPI >parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] >nvidia: module license 'NVIDIA' taints kernel. >ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 >sd 4:0:0:0: [sdb] Attached SCSI removable disk >sd 4:0:0:0: Attached scsi generic sg3 type 0 >scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 >sd 4:0:0:1: [sdc] Attached SCSI removable disk >sd 4:0:0:1: Attached scsi generic sg4 type 0 >scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 >sd 4:0:0:2: [sdd] Attached SCSI removable disk >sd 4:0:0:2: Attached scsi generic sg5 type 0 >scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0 >sd 4:0:0:3: [sde] Attached SCSI removable disk >sd 4:0:0:3: Attached scsi generic sg6 type 0 >usb-storage: device scan complete >NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.08 Wed Apr 2 07:55:48 PST 2008 >ppdev: user-space parallel port driver >Linux video capture interface: v2.00 >bttv: driver version 0.9.17 loaded >bttv: using 8 buffers with 2080k (520 pages) each for capture >bttv: Bt8xx card found (0). >ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16 >bttv0: Bt848 (rev 18) at 0000:00:09.0, irq: 16, latency: 64, mmio: 0xdff00000 >bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] >bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init] >bt848 #0 [sw]: Test OK >ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800005b5351] >tveeprom 1-0050: Huh, no eeprom present (err=-121)? >bttv0: tuner type unset >bttv0: i2c: checking for MSP34xx @ 0x80... not found >bttv0: i2c: checking for TDA9875 @ 0xb0... not found >bttv0: i2c: checking for TDA7432 @ 0x8a... not found >bttv0: registered device video0 >bttv0: registered device vbi0 >ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18 >PCI: Enabling device 0000:00:11.5 (0000 -> 0001) >ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:11.5 to 64 >PCI: Enabling device 0000:00:11.6 (0000 -> 0001) >ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:11.6 to 64 >ACPI: PCI interrupt for device 0000:00:11.6 disabled >VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 >Adding 1959888k swap on /dev/sda6. Priority:-1 extents:1 across:1959888k >device-mapper: uevent: version 1.0.3 >device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com >loop: module loaded >REISERFS (device sda7): found reiserfs format "3.6" with standard journal >REISERFS (device sda7): using ordered data mode >REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >REISERFS (device sda7): checking transaction log (sda7) >REISERFS (device sda7): Using r5 hash to sort names >kjournald starting. Commit interval 5 seconds >EXT3 FS on sda5, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >kjournald starting. Commit interval 5 seconds >EXT3 FS on sda1, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >fuse init (API version 7.9) >powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 180 processors (2 cpu cores) (version 2.20.00) >powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8 >powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xa >powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xc >powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe >powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 >NET: Registered protocol family 10 >lo: Disabled Privacy Extensions >ip6_tables: (C) 2000-2006 Netfilter Core Team >ip_tables: (C) 2000-2006 Netfilter Core Team >nf_conntrack version 0.5.0 (16384 buckets, 65536 max) >Clocksource tsc unstable (delta = -186535633 ns) >skge eth0: enabling interface >ADDRCONF(NETDEV_UP): eth0: link is not ready >NET: Registered protocol family 17 >skge eth0: Link is up at 100 Mbps, full duplex, flow control none >ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >/dev/vmmon[3180]: Module vmmon: registered with major=10 minor=165 >/dev/vmmon[3180]: Module vmmon: initialized >/dev/vmnet: open called by PID 3334 (vmnet-bridge) >/dev/vmnet: hub 0 does not exist, allocating memory. >/dev/vmnet: port on hub 0 successfully opened >bridge-eth0: enabling the bridge >bridge-eth0: up >bridge-eth0: already up >bridge-eth0: attached >eth0: no IPv6 routers present >/dev/vmnet: open called by PID 3381 (vmnet-natd) >/dev/vmnet: hub 8 does not exist, allocating memory. >/dev/vmnet: port on hub 8 successfully opened >w83627hf: Found W83627THF chip at 0x290 >w83627hf w83627hf.656: Reading VID from GPIO5 >/dev/vmnet: open called by PID 3877 (vmnet-netifup) >/dev/vmnet: hub 1 does not exist, allocating memory. >/dev/vmnet: port on hub 1 successfully opened >/dev/vmnet: open called by PID 3878 (vmnet-netifup) >/dev/vmnet: port on hub 8 successfully opened >SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=172.16.26.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=192.168.150.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=172.16.26.1 DST=224.0.0.251 LEN=352 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=332 >SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=192.168.150.1 DST=224.0.0.251 LEN=292 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=272 >SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=172.16.26.1 DST=224.0.0.251 LEN=245 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=225 >/dev/vmnet: open called by PID 4009 (vmnet-dhcpd) >/dev/vmnet: port on hub 8 successfully opened >/dev/vmnet: open called by PID 4010 (vmnet-dhcpd) >/dev/vmnet: port on hub 1 successfully opened >vmnet8: no IPv6 routers present >vmnet1: no IPv6 routers present >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=172.16.26.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=172.16.26.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=192.168.150.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK >sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] >sr 0:0:0:0: [sr0] Add. Sense: No seek complete >end_request: I/O error, dev sr0, sector 9180288 >Buffer I/O error on device sr0, logical block 1147536 >sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK >sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] >sr 0:0:0:0: [sr0] Add. Sense: No seek complete >end_request: I/O error, dev sr0, sector 9180288 >Buffer I/O error on device sr0, logical block 1147536 >sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK >sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] >sr 0:0:0:0: [sr0] Add. Sense: No seek complete >end_request: I/O error, dev sr0, sector 9180400 >Buffer I/O error on device sr0, logical block 1147550 >sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK >sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] >sr 0:0:0:0: [sr0] Add. Sense: No seek complete >end_request: I/O error, dev sr0, sector 9180400 >Buffer I/O error on device sr0, logical block 1147550 >sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK >sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] >sr 0:0:0:0: [sr0] Add. Sense: No seek complete >end_request: I/O error, dev sr0, sector 9180408 >Buffer I/O error on device sr0, logical block 1147551 >sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current] >sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present >end_request: I/O error, dev sr0, sector 9180408 >Buffer I/O error on device sr0, logical block 1147551 >sr 0:0:0:0: [sr0] Device not ready: Sense Key : Not Ready [current] >sr 0:0:0:0: [sr0] Device not ready: Add. Sense: Medium not present >end_request: I/O error, dev sr0, sector 9180408 >Buffer I/O error on device sr0, logical block 1147551 >sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK >sr 0:0:0:0: [sr0] Sense Key : Medium Error [current] >sr 0:0:0:0: [sr0] Add. Sense: No seek complete >end_request: I/O error, dev sr0, sector 9180408 >Buffer I/O error on device sr0, logical block 1147551 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=172.16.26.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=192.168.150.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >end_request: I/O error, dev sr0, sector 9180288 >Buffer I/O error on device sr0, logical block 1147536 >end_request: I/O error, dev sr0, sector 9180288 >Buffer I/O error on device sr0, logical block 1147536 >end_request: I/O error, dev sr0, sector 9180400 >Buffer I/O error on device sr0, logical block 1147550 >end_request: I/O error, dev sr0, sector 9180400 >Buffer I/O error on device sr0, logical block 1147550 >end_request: I/O error, dev sr0, sector 9180408 >Buffer I/O error on device sr0, logical block 1147551 >end_request: I/O error, dev sr0, sector 9180408 >Buffer I/O error on device sr0, logical block 1147551 >end_request: I/O error, dev sr0, sector 9180408 >Buffer I/O error on device sr0, logical block 1147551 >end_request: I/O error, dev sr0, sector 9180408 >Buffer I/O error on device sr0, logical block 1147551 >end_request: I/O error, dev sr0, sector 9180408 >Buffer I/O error on device sr0, logical block 1147551 >end_request: I/O error, dev sr0, sector 9180408 >Buffer I/O error on device sr0, logical block 1147551 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180352 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180352 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180352 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180352 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180352 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180352 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180288 >printk: 80 messages suppressed. >Buffer I/O error on device sr0, logical block 1147536 >end_request: I/O error, dev sr0, sector 9180288 >Buffer I/O error on device sr0, logical block 1147536 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180352 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180352 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180288 >printk: 28 messages suppressed. >Buffer I/O error on device sr0, logical block 1147536 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180352 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180288 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180352 >end_request: I/O error, dev sr0, sector 9180400 >end_request: I/O error, dev sr0, sector 9180408 >end_request: I/O error, dev sr0, sector 9180408 >ISO 9660 Extensions: Microsoft Joliet Level 3 >ISO 9660 Extensions: RRIP_1991A >printk: 29 messages suppressed. >strigidaemon[4540]: segfault at 0 ip 417e15 sp 43551f10 error 4 in strigidaemon[400000+4f000] >strigidaemon[4547]: segfault at 0 ip 417e15 sp 41dc0f10 error 4 in strigidaemon[400000+4f000] >strigidaemon[4555]: segfault at 0 ip 416d08 sp 439fbe98 error 4 in strigidaemon[400000+4f000] >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=172.16.26.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=192.168.150.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >/dev/vmnet: open called by PID 4667 (vmware-vmx) >RTNL: assertion failed at net/core/dev.c (2826) >Pid: 4667, comm: vmware-vmx Tainted: P N 2.6.25-26-default #1 > >Call Trace: > [<ffffffff8020d686>] dump_trace+0xc4/0x576 > [<ffffffff8020db78>] show_trace+0x40/0x57 > [<ffffffff804502d5>] _etext+0x72/0x7b > [<ffffffff803d4781>] __dev_set_promiscuity+0x47/0x13f > [<ffffffff803d4c82>] dev_set_promiscuity+0x16/0x2d > [<ffffffff88dd3d7b>] :vmnet:VNetBridgeStartPromisc+0x29/0x47 > [<ffffffff88dd4235>] :vmnet:VNetBridgePortsChanged+0x25/0x2e > [<ffffffff88dd22a3>] :vmnet:VNetHubPortsChanged+0xb0/0xc6 > [<ffffffff88dd16d5>] :vmnet:VNetConnect+0x101/0x114 > [<ffffffff88dd1bf6>] :vmnet:VNetFileOpOpen+0xcb/0x164 > [<ffffffff802a3bfb>] chrdev_open+0x15d/0x181 > [<ffffffff8029f906>] __dentry_open+0xf5/0x1c8 > [<ffffffff8029fa8e>] nameidata_to_filp+0x2e/0x3f > [<ffffffff8029fad8>] do_filp_open+0x39/0x4b > [<ffffffff8029fb3b>] do_sys_open+0x51/0xd2 > [<ffffffff802ced67>] compat_sys_open+0x15/0x17 > [<ffffffff80226ad4>] cstar_do_call+0x1b/0x65 >DWARF2 unwinder stuck at cstar_do_call+0x1b/0x65 > >Leftover inexact backtrace: > > >device eth0 entered promiscuous mode >bridge-eth0: enabled promiscuous mode >/dev/vmnet: port on hub 0 successfully opened >/dev/vmmon[4677]: host clock rate change request 0 -> 19 >/dev/vmmon[4677]: host clock rate change request 19 -> 83 >/dev/vmnet: open called by PID 4677 (vmware-vmx) >RTNL: assertion failed at net/core/dev.c (2826) >Pid: 4679, comm: vmware-vmx Tainted: P N 2.6.25-26-default #1 > >Call Trace: > [<ffffffff8020d686>] dump_trace+0xc4/0x576 > [<ffffffff8020db78>] show_trace+0x40/0x57 > [<ffffffff804502d5>] _etext+0x72/0x7b > [<ffffffff803d4781>] __dev_set_promiscuity+0x47/0x13f > [<ffffffff803d4c82>] dev_set_promiscuity+0x16/0x2d > [<ffffffff88dd41f6>] :vmnet:VNetBridgeStopPromisc+0x27/0x41 > [<ffffffff88dd423c>] :vmnet:VNetBridgePortsChanged+0x2c/0x2e > [<ffffffff88dd22a3>] :vmnet:VNetHubPortsChanged+0xb0/0xc6 > [<ffffffff88dd15cc>] :vmnet:VNetDisconnect+0x75/0x7d > [<ffffffff88dd175d>] :vmnet:VNetFileOpClose+0x4d/0xb9 > [<ffffffff802a2292>] __fput+0xb9/0x178 > [<ffffffff802a2365>] fput+0x14/0x16 > [<ffffffff802adc94>] poll_freewait+0x39/0x89 > [<ffffffff802adfd0>] do_sys_poll+0x2ec/0x370 > [<ffffffff802ae280>] sys_poll+0x39/0x85 > [<ffffffff80226ad4>] cstar_do_call+0x1b/0x65 >DWARF2 unwinder stuck at cstar_do_call+0x1b/0x65 > >Leftover inexact backtrace: > > >device eth0 left promiscuous mode >bridge-eth0: disabled promiscuous mode >RTNL: assertion failed at net/core/dev.c (2826) >Pid: 4677, comm: vmware-vmx Tainted: P N 2.6.25-26-default #1 > >Call Trace: > [<ffffffff8020d686>] dump_trace+0xc4/0x576 > [<ffffffff8020db78>] show_trace+0x40/0x57 > [<ffffffff804502d5>] _etext+0x72/0x7b > [<ffffffff803d4781>] __dev_set_promiscuity+0x47/0x13f > [<ffffffff803d4c82>] dev_set_promiscuity+0x16/0x2d > [<ffffffff88dd3d7b>] :vmnet:VNetBridgeStartPromisc+0x29/0x47 > [<ffffffff88dd4235>] :vmnet:VNetBridgePortsChanged+0x25/0x2e > [<ffffffff88dd22a3>] :vmnet:VNetHubPortsChanged+0xb0/0xc6 > [<ffffffff88dd16d5>] :vmnet:VNetConnect+0x101/0x114 > [<ffffffff88dd1bf6>] :vmnet:VNetFileOpOpen+0xcb/0x164 > [<ffffffff802a3bfb>] chrdev_open+0x15d/0x181 > [<ffffffff8029f906>] __dentry_open+0xf5/0x1c8 > [<ffffffff8029fa8e>] nameidata_to_filp+0x2e/0x3f > [<ffffffff8029fad8>] do_filp_open+0x39/0x4b > [<ffffffff8029fb3b>] do_sys_open+0x51/0xd2 > [<ffffffff802ced67>] compat_sys_open+0x15/0x17 > [<ffffffff80226ad4>] cstar_do_call+0x1b/0x65 >DWARF2 unwinder stuck at cstar_do_call+0x1b/0x65 > >Leftover inexact backtrace: > > >device eth0 entered promiscuous mode >bridge-eth0: enabled promiscuous mode >/dev/vmnet: port on hub 0 successfully opened >SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:13:d4:aa:99:5f:00:0c:29:07:58:29:08:00 SRC=192.168.1.4 DST=192.168.1.2 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=13 DF PROTO=TCP SPT=1025 DPT=445 WINDOW=64240 RES=0x00 SYN URGP=0 OPT (020405B401010402) >SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:13:d4:aa:99:5f:00:0c:29:07:58:29:08:00 SRC=192.168.1.4 DST=192.168.1.2 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=15 DF PROTO=TCP SPT=1025 DPT=445 WINDOW=64240 RES=0x00 SYN URGP=0 OPT (020405B401010402) >SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:13:d4:aa:99:5f:00:0c:29:07:58:29:08:00 SRC=192.168.1.4 DST=192.168.1.2 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=17 DF PROTO=TCP SPT=1025 DPT=445 WINDOW=64240 RES=0x00 SYN URGP=0 OPT (020405B401010402)
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 384150
:
213984
| 213992 |
219360