Attachment 214185 Details for Bug 357881

dmesg after an upgrade from OpenSuse 10.3->11.0 beta 2

dmesg.log (text/x-log), 29.84 KB, created by Foolish Ewe on 2008-05-10 13:40:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Foolish Ewe

Created: 2008-05-10 13:40:43 UTC

Size: 29.84 KB

patch

obsolete

>Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
>Command line: root=/dev/disk/by-id/scsi-SATA_TOSHIBA_MK2035G_87QST25FT-part7 resume=/dev/sda6 splash=silent vga=0x314
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f4fe000 (usable)
> BIOS-e820: 000000007f4fe000 - 000000007f509000 (reserved)
> BIOS-e820: 000000007f509000 - 000000007f552000 (usable)
> BIOS-e820: 000000007f552000 - 000000007f555000 (reserved)
> BIOS-e820: 000000007f555000 - 000000007f5bb000 (usable)
> BIOS-e820: 000000007f5bb000 - 000000007f5bf000 (reserved)
> BIOS-e820: 000000007f5bf000 - 000000007f676000 (usable)
> BIOS-e820: 000000007f676000 - 000000007f6bf000 (ACPI NVS)
> BIOS-e820: 000000007f6bf000 - 000000007f700000 (ACPI data)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521470) 1 entries of 3200 used
>Entering add_active_range(0, 521481, 521554) 2 entries of 3200 used
>Entering add_active_range(0, 521557, 521659) 3 entries of 3200 used
>Entering add_active_range(0, 521663, 521846) 4 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000FE020, 0024 (r2 ACRSYS)
>ACPI: XSDT 7F6FE120, 0064 (r1 ACRSYS ACRPRDCT        1       1000013)
>ACPI: FACP 7F6FD000, 00F4 (r4 ACRSYS ACRPRDCT        1 MSFT  1000013)
>ACPI: DSDT 7F6F4000, 8500 (r1 ACRSYS ACRPRDCT        1 MSFT  1000013)
>ACPI: FACS 7F67B000, 0040
>ACPI: APIC 7F6F3000, 0068 (r2 ACRSYS ACRPRDCT        1 MSFT  1000013)
>ACPI: MCFG 7F6F2000, 003C (r1 ACRSYS ACRPRDCT        1 MSFT  1000013)
>ACPI: SLIC 7F6F1000, 0176 (r1 ACRSYS ACRPRDCT        1 MSFT  1000013)
>ACPI: HPET 7F6F0000, 0038 (r1 ACRSYS ACRPRDCT        1 MSFT  1000013)
>ACPI: SSDT 7F6EF000, 04C4 (r1  PmRef    CpuPm     3000 INTL 20051117)
>ACPI: SSDT 7F6EE000, 0232 (r1  PmRef  Cpu0Tst     3000 INTL 20051117)
>ACPI: SSDT 7F6ED000, 00A0 (r1  PmRef  Cpu1Tst     3000 INTL 20051117)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f676000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521470) 1 entries of 3200 used
>Entering add_active_range(0, 521481, 521554) 2 entries of 3200 used
>Entering add_active_range(0, 521557, 521659) 3 entries of 3200 used
>Entering add_active_range(0, 521663, 521846) 4 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007f676000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[5] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   521470
>    0:   521481 ->   521554
>    0:   521557 ->   521659
>    0:   521663 ->   521846
>On node 0 totalpages: 521731
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1271 pages reserved
>  DMA zone: 2672 pages, LIFO batch:0
>  DMA32 zone: 7078 pages used for memmap
>  DMA32 zone: 510654 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>swsusp: Registered nosave memory region: 000000007f4fe000 - 000000007f509000
>swsusp: Registered nosave memory region: 000000007f552000 - 000000007f555000
>swsusp: Registered nosave memory region: 000000007f5bb000 - 000000007f5bf000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 50296 bytes of per cpu data
>Built 1 zonelists.  Total pages: 513326
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_TOSHIBA_MK2035G_87QST25FT-part7 resume=/dev/sda6 splash=silent vga=0x314
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 1462.999 MHz processor.
>Console: colour dummy device 80x25
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2048448k/2087384k available (2053k kernel code, 38476k reserved, 1017k data, 316k init)
>Calibrating delay using timer specific routine.. 2929.48 BogoMIPS (lpj=5858967)
>Security Framework v1.0.0 initialized
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>Unpacking initramfs... done
>Freeing initrd memory: 4628k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 1296 Objects with 106 Devices 238 Methods 39 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 13 Objects with 0 Devices 4 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>result 8312493
>Detected 8.312 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 2926.02 BogoMIPS (lpj=5852040)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>Intel(R) Pentium(R) Dual  CPU  T2310  @ 1.46GHz stepping 0d
>Brought up 2 CPUs
>migration_cost=15
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 7 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:.....................................................................................................................................
>Initialized 35/39 Regions 39/39 Fields 40/40 Buffers 19/30 Packages (1329 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:<4>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: Please test with "acpi_osi=!Linux"
>Please send dmidecode to linux-acpi@vger.kernel.org
>.
>Executed 1 _INI methods requiring 0 _STA executions (examined 111 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>pnp: 00:01: ioport range 0x164e-0x164f has been reserved
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 4000-4fff
>  MEM window: 97400000-983fffff
>  PREFETCH window: 90000000-90ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: 96400000-973fffff
>  PREFETCH window: 91000000-91ffffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 2000-2fff
>  MEM window: 95300000-963fffff
>  PREFETCH window: 92000000-92ffffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 1000-1fff
>  MEM window: 94200000-952fffff
>  PREFETCH window: 93000000-93ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 94100000-941fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>Time: hpet clocksource has been installed.
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1210408609.708:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>vesafb: framebuffer at 0x80000000, mapped to 0xffffc20010b80000, using 3750k, total 7616k
>vesafb: mode is 800x600x16, linelength=1600, pages=6
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 78734 bytes
>bootsplash: ...found (800x600, 27773 bytes, v3).
>Console: switching to colour frame buffer device 96x33
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>NET: Registered protocol family 1
>Freeing unused kernel memory: 316k freed
>ACPI: SSDT 7F67AC90, 01EA (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
>Parsing all Control Methods:
>Table [SSDT](id 00EF) - 6 Objects with 0 Devices 3 Methods 0 Regions
>ACPI: SSDT 7F679610, 05D7 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
>Parsing all Control Methods:
>Table [SSDT](id 00F0) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F67AF10, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
>Parsing all Control Methods:
>Table [SSDT](id 00F4) - 4 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT 7F67CD10, 0083 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
>Parsing all Control Methods:
>Table [SSDT](id 00F5) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [TZ01] (50 C)
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x3) don't match
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc20000344100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4347
>ata2: SATA max UDMA/133 cmd 0xffffc20000344180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 4347
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: TOSHIBA MK2035GSS, DK022A, max UDMA/100
>ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.1: version 2.11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000150e0 irq 14
>ata4: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000150e8 irq 15
>ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
>ata3.00: configured for UDMA/33
>scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050c0
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050a0
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
> sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
>usb usb4: new device found, idVendor=0000, idProduct=0000
>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.1
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
>usb usb5: new device found, idVendor=0000, idProduct=0000
>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.22.17-0.1-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.2
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0x98404c00
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: new device found, idVendor=0000, idProduct=0000
>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: EHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
>usb usb6: SerialNumber: 0000:00:1a.7
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>usb 4-2: not running at top speed; connect to a high speed hub
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x98404800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: new device found, idVendor=0000, idProduct=0000
>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb 4-2: unable to read config index 0 descriptor/start
>usb 4-2: chopping to 0 config(s)
>usb usb7: Product: EHCI Host Controller
>usb 4-2: string descriptor 0 read error: -71
>usb usb7: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
>usb usb7: SerialNumber: 0000:00:1d.7
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb 4-2: string descriptor 0 read error: -71
>usb 4-2: string descriptor 0 read error: -71
>usb 4-2: new device found, idVendor=064e, idProduct=a101
>usb 4-2: new device strings: Mfr=2, Product=1, SerialNumber=3
>usb 4-2: no configuration chosen from 0 choices
>usb 4-2: USB disconnect, address 2
>usb 7-4: new high speed USB device using ehci_hcd and address 2
>swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
>swsusp: Marking nosave pages: 000000007f4fe000 - 000000007f509000
>swsusp: Marking nosave pages: 000000007f552000 - 000000007f555000
>swsusp: Marking nosave pages: 000000007f5bb000 - 000000007f5bf000
>swsusp: Basic memory bitmaps created
>swsusp: Basic memory bitmaps freed
>Attempting manual resume
>usb 7-4: new device found, idVendor=064e, idProduct=a101
>usb 7-4: new device strings: Mfr=2, Product=1, SerialNumber=3
>usb 7-4: Product: Acer CrystalEye webcam
>usb 7-4: Manufacturer: SuYin
>usb 7-4: SerialNumber: CN0314-OV03-VA-R02.00.00
>usb 7-4: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0x80000000
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:03 failed with error -16
>ieee80211_crypt: registered algorithm 'NULL'
>tg3.c:v3.77 (May 31, 2007)
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>eth0: Tigon3 [partno(BCM95787m) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1b:38:52:c6:d6
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2337:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2341:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:2349:    inputs: mic=0x19, fmic=0x18, line=0x0, fline=0x1a, cd=0x0, aux=0x0
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ACPI: AC Adapter [AC] (on-line)
>sdhci: SDHCI controller found at 0000:07:00.1 [1180:0822] (rev 22)
>ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:07:00.1 to 64
>mmc0: SDHCI at 0x94100b00 irq 22 DMA
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[94100000-941007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2dmpr
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>Linux video capture interface: v2.00
>ACPI: Battery Slot [BAT0] (battery present)
>uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>set_level status: 0
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>set_level status: 0
>ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
>ipw3945: ipw3945.ucode load failed: Reason -2
>ipw3945: Could not read microcode: -2
>ACPI: PCI interrupt for device 0000:06:00.0 disabled
>ipw3945: probe of 0000:06:00.0 failed with error -2
>Adding 4200956k swap on /dev/sda6.  Priority:-1 extents:1 across:4200956k
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[b641660300023f78]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>AppArmor: AppArmor initialized
>audit(1210408638.701:2):  type=1505 info="AppArmor initialized" pid=2241
>audit(1210408638.989:3):  type=1505 operation="profile_load" info="unsupported interface version" pid=2252
>audit(1210408639.061:4):  type=1505 operation="profile_load" info="unsupported interface version" pid=2253
>audit(1210408639.149:5):  type=1505 operation="profile_load" info="unsupported interface version" pid=2254
>audit(1210408639.237:6):  type=1505 operation="profile_load" info="unsupported interface version" pid=2255
>audit(1210408639.333:7):  type=1505 operation="profile_load" info="unsupported interface version" pid=2262
>audit(1210408639.409:8):  type=1505 operation="profile_load" info="unsupported interface version" pid=2302
>audit(1210408639.461:9):  type=1505 operation="profile_load" info="unsupported interface version" pid=2303
>audit(1210408639.525:10):  type=1505 operation="profile_load" info="unsupported interface version" pid=2316
>audit(1210408639.593:11):  type=1505 operation="profile_load" info="unsupported interface version" pid=2335
>audit(1210408639.649:12):  type=1505 operation="profile_load" info="unsupported interface version" pid=2344
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100406, writing 100006)
>set_level status: 0
>audit(1210408661.574:13): audit_pid=3221 old=0 by auid=4294967295
>set_level status: 0
>set_level status: 0
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>Mobile IPv6
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>set_level status: 0
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Machine check events logged
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal
>set_level status: 0
>set_level status: 0
>set_level status: 0
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>NET: Registered protocol family 17
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>set_level status: 0
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>eth0: no IPv6 routers present
>set_level status: 0
>Machine check events logged
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>Machine check events logged
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>Machine check events logged
>CPU1: Temperature/speed normal
>CPU0: Temperature/speed normal
>Machine check events logged
>CPU0: Temperature/speed normal
>CPU1: Temperature/speed normal

Actions: View

Attachments on bug 357881: 192808 | 192809 | 193540 | 193636 | 214185 | 214193 | 217436 | 217782 | 217969 | 217971 | 218188 | 218756 | 218757 | 218758