Bugzilla – Attachment 214205 Details for
Bug 373098
ath5k failure with AR242x
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
ath_info 54100000
ath_info 54100000 (text/plain), 3.91 KB, created by
Luiz Fernando Ranghetti
on 2008-05-10 20:01:35 UTC
(
hide
)
Description:
ath_info 54100000
Filename:
MIME Type:
Creator:
Luiz Fernando Ranghetti
Created:
2008-05-10 20:01:35 UTC
Size:
3.91 KB
patch
obsolete
>linux:/home/elchevive # ./ath_info 54100000 > -==Device Information==- >MAC Version: 2425 (0xe0) >MAC Revision: ????? (0xe2) >Warning: Invalid EEPROM Magic number! >Device type: 3 > >/============== EEPROM Information =============\ >| EEPROM Version: 5.3 | EEPROM Size: 4 kbit | >| EEMAP: 2 | Reg. Domain: 0x65 | >|================= Capabilities ================| >| 802.11a Support: no | Turbo-A disabled: yes | >| 802.11b Support: no | Turbo-G disabled: yes | >| 802.11g Support: yes | 2GHz XR disabled: yes | >| RFKill Support: yes | 5GHz XR disabled: yes | >| 32kHz Crystal: no | | >\===============================================/ > >/=========================================================\ >| Calibration data common for all modes | >|=========================================================| >| CCK/OFDM gain delta: 1 | >| CCK/OFDM power delta: 5 | >| Scaled CCK delta: 5 | >| 2GHz Antenna gain: 1 | >| 5GHz Antenna gain: 4 | >| Turbo 2W maximum dBm: 38 | >| Target power start: 0x16e | >| EAR Start: 0x1b8 | >\=========================================================/ > >/=========================================================\ >| Calibration data for 802.11g operation | >|=========================================================| >| I power: 0x00 | Q power: 0x10 | >| Use fixed bias: 0x01 | Max turbo power: 0x26 | >| Max XR power: 0x24 | Switch Settling Time: 0x28 | >| Tx/Rx attenuation: 0x19 | TX end to XLNA On: 0x00 | >| TX end to XPA Off: 0x00 | TX end to XPA On: 0x0e | >| 62db Threshold: 0x1c | XLNA gain: 0x00 | >| XPD: 0x01 | XPD gain: 0x0a | >| I gain: 0x00 | Tx/Rx margin: 0x01 | >| False detect backoff: 0x00 | Noise Floor Threshold: -1 | >| ADC desired size: -38 | PGA desired size: -80 | >|=========================================================| >| Antenna control 0: 0x00 | Antenna control 1: 0x02 | >| Antenna control 2: 0x21 | Antenna control 3: 0x21 | >| Antenna control 4: 0x00 | Antenna control 5: 0x00 | >| Antenna control 6: 0x01 | Antenna control 7: 0x22 | >| Antenna control 8: 0x22 | Antenna control 9: 0x00 | >| Antenna control 10: 0x00 | Antenna control 11: 0x02 | >|=========================================================| >| Octave Band 0: 3 | db 0: 3 | >| Octave Band 1: 4 | db 1: 4 | >| Octave Band 2: 0 | db 2: 0 | >| Octave Band 3: 0 | db 3: 0 | >\=========================================================/ >/=================== Per channel power calibration ====================\ >| Freq | pwr_0 | pwr_1 | pwr_2 | pwr_3 |pwrx3_0|pwrx3_1|pwrx3_2|max_pwr| >| | pcdac | pcdac | pcdac | pcdac | pcdac | pcdac | pcdac | | >|======|=======|=======|=======|=======|=======|=======|=======|=======| >| 2412 | 25.00 | 25.00 | 0.00 | 25.00 | 0.00 | 0.00 | 29.01 | 25.00 | >| | [112] | [112] | [112] | [112] | [20] | [35] | [63] | | >\======================================================================/ > >GPIO registers: CR 0x00000000, DO 0x00000000, DI 0x0000000b >STA_ID0: 6f:ba:cb:ff:6f:ba >STA_ID1: 0x0000ba6f, AP: 0, IBSS: 0, KeyCache Disable: 0 >TIMER0: 0x0000bbff, TBTT: 48127, TU: 0x0002bbff >TIMER1: 0x0001f7f8, DMAb: 16127, TU: 0x00033eff (+33536) >TIMER2: 0x01601124, SWBA: 548, TU: 0x002c0224 (+2704933) >TIMER3: 0x0000ebc1, ATIM: 60353, TU: 0x0002ebc1 (+12226) >TSF: 0x000000000aacc266, TSFTU: 43824, TU: 0x0002ab30 >BEACON: 0x004baa6f >LAST_TSTP: 0xdf04970c >linux:/home/elchevive # uname -r >2.6.25.2-2-default >linux:/home/elchevive #
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 373098
:
214113
|
214122
|
214123
| 214205 |
232821