Attachment 215829 Details for Bug 383083

dmesg3

dmesg3.txt (text/plain), 48.38 KB, created by Quentin Jackson on 2008-05-16 07:07:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Quentin Jackson

Created: 2008-05-16 07:07:59 UTC

Size: 48.38 KB

patch

obsolete

>Linux version 2.6.25.3-2-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-05-10 07:46:36 +0200
>Command line: root=/dev/sda2 resume=/dev/sda1 splash=silent showopts vga=0x314
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000100 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
> BIOS-e820: 00000000bffb0000 - 00000000bffc5400 (reserved)
> BIOS-e820: 00000000bffc5400 - 00000000bffe7fb8 (ACPI NVS)
> BIOS-e820: 00000000bffe7fb8 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>Entering add_active_range(0, 1, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 786352) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
>end_pfn_map = 1310720
>DMI 2.4 present.
>ACPI: RSDP 000F7AF0, 0024 (r2 HP    )
>ACPI: XSDT BFFC81C8, 007C (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: FACP BFFC8084, 00F4 (r4 HP     30C5            3 HP          1)
>ACPI: DSDT BFFC84CC, 12E41 (r1 HP        8510x    10000 MSFT  3000001)
>ACPI: FACS BFFE7D80, 0040
>ACPI: SLIC BFFC8244, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: HPET BFFC83BC, 0038 (r1 HP     30C5            1 HP          1)
>ACPI: APIC BFFC83F4, 0068 (r1 HP     30C5            1 HP          1)
>ACPI: MCFG BFFC845C, 003C (r1 HP     30C5            1 HP          1)
>ACPI: TCPA BFFC8498, 0032 (r2 HP     30C5            1 HP          1)
>ACPI: SSDT BFFDB30D, 0328 (r1 HP       HPQSAT        1 MSFT  3000001)
>ACPI: SSDT BFFDB635, 017C (r1 HP       HPQMRM        1 MSFT  3000001)
>ACPI: SSDT BFFDC1B9, 025F (r1 HP      Cpu0Tst     3000 INTL 20060317)
>ACPI: SSDT BFFDC418, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20060317)
>ACPI: SSDT BFFDC4BE, 04D7 (r1 HP        CpuPm     3000 INTL 20060317)
>ACPI: DMI detected: Hewlett-Packard
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000140000000
>Entering add_active_range(0, 1, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 786352) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000140000000
>  NODE_DATA [000000000000e000 - 0000000000015fff]
>  bootmap [0000000000016000 -  000000000003dfff] pages 28
>early res: 0 [0-fff] BIOS data page
>early res: 1 [6000-7fff] SMP_TRAMPOLINE
>early res: 2 [200000-8b8bd7] TEXT DATA BSS
>early res: 3 [7fb36000-7fff3393] RAMDISK
>early res: 4 [9fc00-a0bff] EBDA
>early res: 5 [8000-dfff] PGTABLE
>No mptable found.
> [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
> [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
> [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
> [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
> [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
> [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
> [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
> [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006600000 on node 0
> [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810006a00000 on node 0
> [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810006e00000 on node 0
> [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007200000 on node 0
> [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007600000 on node 0
> [ffffe20004200000-ffffe200043fffff] PMD ->ffff810007a00000 on node 0
> [ffffe20004400000-ffffe200045fffff] PMD ->ffff810007e00000 on node 0
>Zone PFN ranges:
>  DMA             1 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1310720
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        1 ->      159
>    0:      256 ->   786352
>    0:  1048576 ->  1310720
>On node 0 totalpages: 1048398
>  DMA zone: 55 pages used for memmap
>  DMA zone: 1730 pages reserved
>  DMA zone: 2213 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 767976 pages, LIFO batch:31
>  Normal zone: 3584 pages used for memmap
>  Normal zone: 258560 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 00000000bffb0000 - 00000000bffc5000
>PM: Registered nosave memory: 00000000bffc5000 - 00000000bffc6000
>PM: Registered nosave memory: 00000000bffc6000 - 00000000bffe7000
>PM: Registered nosave memory: 00000000bffe7000 - 00000000bffe8000
>PM: Registered nosave memory: 00000000bffe8000 - 00000000c0000000
>PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000
>PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000
>PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000
>PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000
>PM: Registered nosave memory: 00000000fedc0000 - 00000000ffb00000
>PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000
>PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000
>PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
>Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 50608 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1028749
>Policy zone: Normal
>Kernel command line: root=/dev/sda2 resume=/dev/sda1 splash=silent showopts vga=0x314
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>time.c: Detected 2393.997 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x8021000 - 0xc021000
>Memory: 4058084k/5242880k available (2368k kernel code, 135508k reserved, 1930k data, 404k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4793.14 BogoMIPS (lpj=9586291)
>Security Framework initialized
>AppArmor: AppArmor initialized <NULL>
>AppArmor: Registered secondary security module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring handled by SMI
>using mwait in idle threads.
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 1424 Objects with 123 Devices 461 Methods 44 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 17 Objects with 4 Devices 5 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 23 Objects with 0 Devices 13 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0004) - 7 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0005) - 4 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0006) - 14 Objects with 0 Devices 5 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0079 [00] enable                : System is already in ACPI mode
>Using local APIC timer interrupts.
>APIC timer calibration result 12468717
>Detected 12.468 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4787.96 BogoMIPS (lpj=9575938)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>net_namespace: 1016 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 6 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:......................................................................................................................................................................................
>Initialized 37/44 Regions 0/0 Fields 68/69 Buffers 77/92 Packages (1498 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.........
>Executed 9 _INI methods requiring 3 _STA executions (examined 137 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [C003] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C096._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
>ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C12E] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C12F] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C140] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C141] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
>ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
>ACPI: Power Resource [C238] (on)
>ACPI: Power Resource [C254] (on)
>ACPI: Power Resource [C17C] (off)
>ACPI: Power Resource [C362] (off)
>ACPI: Power Resource [C365] (off)
>ACPI: Power Resource [C366] (off)
>ACPI: Power Resource [C367] (off)
>ACPI: Power Resource [C368] (off)
>ACPI: Power Resource [C369] (off)
>ACPI: Power Resource [C382] (off)
>ACPI: Power Resource [C383] (off)
>ACPI: Power Resource [C384] (off)
>ACPI: Power Resource [C385] (off)
>ACPI: Power Resource [C386] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>AppArmor: AppArmor Filesystem Enabled 
>ACPI: RTC can wake from S4
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
>system 00:0b: ioport range 0x500-0x55f has been reserved
>system 00:0b: ioport range 0x800-0x80f has been reserved
>system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0d: ioport range 0x1000-0x107f has been reserved
>system 00:0d: ioport range 0x1100-0x113f has been reserved
>system 00:0d: ioport range 0x1200-0x121f has been reserved
>system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
>system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
>system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
>system 00:0d: iomem range 0xfed90000-0xfed99fff could not be reserved
>system 00:0e: iomem range 0xcd200-0xcffff has been reserved
>system 00:0e: iomem range 0xd2000-0xd3fff has been reserved
>system 00:0e: iomem range 0xfeda0000-0xfedbffff could not be reserved
>system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 4000-4fff
>  MEM window: 0xe5000000-0xe7ffffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: 0xe4000000-0xe40fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: 2000-3fff
>  MEM window: 0xe0000000-0xe3ffffff
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 0x00006000-0x000060ff
>  IO window: 0x00006400-0x000064ff
>  PREFETCH window: 0xc4000000-0xc7ffffff
>  MEM window: 0xcc000000-0xcfffffff
>PCI: Bus 7, cardbus bridge: 0000:02:06.1
>  IO window: 0x00006800-0x000068ff
>  IO window: 0x00006c00-0x00006cff
>  PREFETCH window: 0xc8000000-0xcbffffff
>  MEM window: 0xec000000-0xefffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 6000-6fff
>  MEM window: 0xe4100000-0xe43fffff
>  PREFETCH window: 0x00000000c4000000-0x00000000cbffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 17 (level, low) -> IRQ 17
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>Unpacking initramfs...<7>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> done
>Freeing initrd memory: 4852k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1210963607.600:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>vesafb: framebuffer at 0xe7000000, mapped to 0xffffc20001080000, using 3750k, total 3776k
>vesafb: mode is 800x600x16, linelength=1600, pages=938
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 95134 bytes
>bootsplash: ...found (800x600, 169778 bytes, v3).
>Console: switching to colour frame buffer device 96x33
>fb0: VESA VGA frame buffer device
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>PNP: PS/2 Controller [PNP0303:C251,PNP0f13:C252] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>registered taskstats version 1
>Freeing unused kernel memory: 404k freed
>Write protecting the kernel read-only data: 1688k
>ACPI: SSDT BFFDB879, 02C1 (r1 HP      Cpu0Ist     3000 INTL 20060317)
>Parsing all Control Methods:
>Table [SSDT](id 005B) - 6 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT BFFDBBBF, 05FA (r1 HP      Cpu0Cst     3001 INTL 20060317)
>Parsing all Control Methods:
>Table [SSDT](id 005C) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT BFFDB7B1, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
>Parsing all Control Methods:
>Table [SSDT](id 0070) - 4 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT BFFDBB3A, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
>Parsing all Control Methods:
>Table [SSDT](id 0071) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:01 is registered as cooling_device1
>Marking TSC unstable due to TSC halts in idle
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZ2] (51 C)
>ACPI: LNXTHERM:02 is registered as thermal_zone1
>ACPI: Thermal Zone [TZ3] (45 C)
>ACPI: LNXTHERM:03 is registered as thermal_zone2
>ACPI: Thermal Zone [TZ4] (27 C)
>ACPI: LNXTHERM:04 is registered as thermal_zone3
>ACPI: Thermal Zone [TZ5] (58 C)
>ACPI: LNXTHERM:05 is registered as thermal_zone4
>ACPI: Thermal Zone [TZ0] (61 C)
>ACPI: LNXTHERM:06 is registered as thermal_zone5
>ACPI: Thermal Zone [TZ1] (58 C)
>No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 21 (level, low) -> IRQ 21
>Clocksource tsc unstable (delta = -384997012 ns)
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa44793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed
>ata2: DUMMY
>ata3: DUMMY
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: ST9120823AS, 3.BHC, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST9120823AS      3.BH PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
>input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input3
>ata4.00: ATAPI: MATSHITABD-MLT UJ-210S, 1.24, max MWDMA2
>ata4.00: configured for MWDMA2
>ata5: port disabled. ignoring.
>scsi 3:0:0:0: CD-ROM            MATSHITA BD-MLT UJ-210S   1.24 PQ: 0 ANSI: 5
>ACPI: Transitioning device [C36A] to D3
>ACPI: PNP0C0B:00 is registered as cooling_device2
>ACPI: Fan [C36A] (off)
>ACPI: Transitioning device [C36B] to D3
>ACPI: PNP0C0B:01 is registered as cooling_device3
>ACPI: Fan [C36B] (off)
>ACPI: Transitioning device [C36C] to D3
>ACPI: PNP0C0B:02 is registered as cooling_device4
>ACPI: Fan [C36C] (off)
>ACPI: PNP0C0B:03 is registered as cooling_device5
>ACPI: Fan [C36D] (on)
>ACPI: PNP0C0B:04 is registered as cooling_device6
>ACPI: Fan [C36E] (on)
>ACPI: Transitioning device [C36F] to D3
>ACPI: PNP0C0B:05 is registered as cooling_device7
>ACPI: Fan [C36F] (off)
>ACPI: Transitioning device [C387] to D3
>ACPI: PNP0C0B:06 is registered as cooling_device8
>ACPI: Fan [C387] (off)
>ACPI: Transitioning device [C388] to D3
>ACPI: PNP0C0B:07 is registered as cooling_device9
>ACPI: Fan [C388] (off)
>ACPI: PNP0C0B:08 is registered as cooling_device10
>ACPI: Fan [C389] (on)
>ACPI: PNP0C0B:09 is registered as cooling_device11
>ACPI: Fan [C38A] (on)
>ACPI: PNP0C0B:0a is registered as cooling_device12
>ACPI: Fan [C38B] (on)
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00005020
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.3-2-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8021000
> sda1 sda2 sda3
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>sd 0:0:0:0: [sda] Attached SCSI disk
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.3-2-default ehci_hcd
>usb usb2: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x00005040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.3-2-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005060
>usb usb4: configuration #1 chosen from 1 choice
>hub 2-0:1.0: unable to enumerate USB device on port 1
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.3-2-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005080
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.3-2-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050a0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: New USB device found, idVendor=03f0, idProduct=171d
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: HP Integrated Module
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25.3-2-default uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8028000
>usb 1-1: Manufacturer: Broadcom Corp
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25.3-2-default ehci_hcd
>usb usb7: SerialNumber: 0000:00:1d.7
>PM: Starting manual resume from disk
>hub 7-0:1.0: unable to enumerate USB device on port 2
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>usb 4-2: New USB device found, idVendor=08ff, idProduct=2580
>usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 4-2: Product: Fingerprint Sensor
>e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
>e1000e: Copyright (c) 1999-2007 Intel Corporation.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:4b:7e:e8:86
>eth0: Intel(R) PRO/1000 Network Connection
>eth0: MAC: 4, PHY: 6, PBA No: ffffff-0ff
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>Bluetooth: Core ver 2.11
>ACPI: Sleep Button (CM) [C274]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ACPI: Lid Switch [C26E]
>ACPI: Battery Slot [C1F4] (battery present)
>ACPI: Battery Slot [C1F3] (battery absent)
>ACPI: AC Adapter [C1F2] (on-line)
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10)
>ricoh-mmc: Controller is now disabled.
>iTCO_vendor_support: vendor-support=0
>ACPI: device:03 is registered as cooling_device13
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
>ACPI: Video Device [C14B] (multi-head: yes  rom: no  post: no)
>ACPI: WMI: Mapper loaded
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Bluetooth: HCI USB driver ver 2.9
>Driver 'sr' needs updating - please use bus_type methods
>usbcore: registered new interface driver hci_usb
>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 18 (level, low) -> IRQ 18
>sdhci: Secure Digital Host Controller Interface driver
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[e4102000-e41027ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:02:06.3 [1180:0822] (rev 20)
>ACPI: PCI Interrupt 0000:02:06.3[D] -> GSI 19 (level, low) -> IRQ 19
>sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc0: SDHCI at 0xe4103000 irq 19 DMA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 3:0:0:0: Attached scsi generic sg1 type 5
>parport_pc 00:02: activated
>parport_pc 00:02: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c5]
>Yenta: ISA IRQ mask 0x0c38, PCI irq 16
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
>pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
>pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff
>Yenta: CardBus bridge found at 0000:02:06.1 [103c:30c5]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ppdev: user-space parallel port driver
>Yenta: ISA IRQ mask 0x0000, PCI irq 17
>Socket status: 30000818
>pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
>pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff
>pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xcbffffff
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks
>iwl4965: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-4965-rs'
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f9929351f10]
>pccard: PCMCIA card inserted into slot 1
>cs: memory probe 0xc4000000-0xcbffffff: excluding 0xc4000000-0xcbffffff
>cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff
>pcmcia: registering new device pcmcia1.0
>Uniform Multi-Platform E-IDE driver
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>ide-cs: ide_register() at 0x6100 & 0x610e, irq 17 failed
>scsi5 : pata_pcmcia
>ata6: PATA max PIO0 cmd 0x6100 ctl 0x610e irq 17
>Adding 2104472k swap on /dev/sda1.  Priority:-1 extents:1 across:2104472k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>type=1505 audit(1210963631.100:2): operation="profile_load" name="/bin/ping" name2="default" pid=1868
>type=1505 audit(1210963631.199:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1878
>type=1505 audit(1210963631.263:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1920
>type=1505 audit(1210963631.347:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1929
>type=1505 audit(1210963631.511:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1954
>type=1505 audit(1210963631.559:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1967
>type=1505 audit(1210963631.619:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1968
>type=1505 audit(1210963631.691:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1972
>type=1505 audit(1210963631.831:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2011
>type=1505 audit(1210963631.855:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=2047
>bootsplash: status on console 0 changed to on
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>ip_tables: (C) 2000-2006 Netfilter Core Team
>st: Version 20080221, fixed bufsize 32768, s/g segs 256
>Driver 'st' needs updating - please use bus_type methods
>NET: Registered protocol family 17
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006)
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>parport_pc 00:02: disabled
>parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
>parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
>parport 0x378: You gave this address, but there is probably no parallel port there!
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>parport_pc 00:02: activated
>parport_pc 00:02: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006)
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>martian source 255.255.255.255 from 192.168.1.102, on dev eth0
>ll header: ff:ff:ff:ff:ff:ff:00:1f:3b:70:4d:77:08:00
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=466 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=446 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=242 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=222 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=466 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=446 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=466 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=446 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=390 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=370 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=430 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=410 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=390 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=370 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=430 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=410 
>eth0: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1d:7e:aa:1d:4a
>wlan0: RX authentication from 00:1d:7e:aa:1d:4a (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1d:7e:aa:1d:4a
>wlan0: RX AssocResp from 00:1d:7e:aa:1d:4a (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1d:7e:aa:1d:4a)
>wlan0 (WE) : Wireless Event too big (366)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>iwl4965: Microcode SW error detected.  Restarting 0x2000000.
>iwl4965: Error sending REPLY_TX_LINK_QUALITY_CMD: time out after 500ms.
>iwl4965: Error sending REPLY_PHY_CALIBRATION_CMD: time out after 500ms.
>iwl4965: Error sending REPLY_QOS_PARAM: time out after 500ms.
>wlan0: No ProbeResp from current AP 00:1d:7e:aa:1d:4a - assume out of range
>iwl4965: Error sending REPLY_RXON_ASSOC: time out after 500ms.
>iwl4965: Error sending REPLY_RXON_ASSOC: time out after 500ms.
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1d:7e:aa:1d:4a
>wlan0: RX authentication from 00:1d:7e:aa:1d:4a (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1d:7e:aa:1d:4a
>wlan0: RX ReassocResp from 00:1d:7e:aa:1d:4a (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1d:7e:aa:1d:4a)
>wlan0 (WE) : Wireless Event too big (366)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>wlan0: no IPv6 routers present
>martian source 192.168.1.255 from 192.168.1.102, on dev wlan0
>ll header: ff:ff:ff:ff:ff:ff:00:1f:3b:70:4d:77:08:00
>martian source 192.168.1.255 from 192.168.1.102, on dev wlan0
>ll header: ff:ff:ff:ff:ff:ff:00:1f:3b:70:4d:77:08:00
>martian source 192.168.1.255 from 192.168.1.102, on dev wlan0
>ll header: ff:ff:ff:ff:ff:ff:00:1f:3b:70:4d:77:08:00
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.101 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>iwl4965: Error sending REPLY_RXON_ASSOC: Already sending a host command
>iwl4965: Error sending REPLY_RXON_ASSOC: Already sending a host command
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>iwl4965: Error sending REPLY_RXON_ASSOC: Already sending a host command
>iwl4965: Error sending REPLY_RXON_ASSOC: Already sending a host command
>wlan0: RX deauthentication from 00:1d:7e:aa:1d:4a (reason=6)
>iwl4965: Error sending REPLY_RXON_ASSOC: Already sending a host command
>iwl4965: Error sending REPLY_RXON_ASSOC: Already sending a host command
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1d:7e:aa:1d:4a
>wlan0: RX authentication from 00:1d:7e:aa:1d:4a (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1d:7e:aa:1d:4a
>wlan0: RX AssocResp from 00:1d:7e:aa:1d:4a (capab=0x431 status=0 aid=2)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1d:7e:aa:1d:4a)
>wlan0 (WE) : Wireless Event too big (366)
>wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=466 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=446 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=242 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=222 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=466 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=446 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=466 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=446 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=390 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=370 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=430 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=410 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=390 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=370 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=430 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=410 
>eth0: Link is Down
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.151 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44

Actions: View

Attachments on bug 383083: 212534 | 215827 | 215829 | 222686 | 243723 | 243724 | 243725