Attachment 218974 Details for Bug 394333

dmesg output after trying to connect using iw* commands

dmesg.txt (text/plain), 55.92 KB, created by Grzegorz Kossakowski on 2008-05-29 20:53:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Grzegorz Kossakowski

Created: 2008-05-29 20:53:51 UTC

Size: 55.92 KB

patch

obsolete

>Linux version 2.6.25.3-2-pae (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-05-10 07:46:36 +0200
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
> BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00f8520] 000f8520
>NX (Execute Disable) protection: active
>Entering add_active_range(0, 0, 523984) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523984
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   523984
>On node 0 totalpages: 523984
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292307 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F8480, 0024 (r2 HP    )
>ACPI: XSDT 7FED5BDD, 007C (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
>ACPI: FACP 7FEDFC6C, 00F4 (r3 HP     30CC      6040000 ALAN        1)
>ACPI: DSDT 7FED703C, 8BBC (r1 HP     30D2      6040000 INTL 20061109)
>ACPI: FACS 7FEE2FC0, 0040
>ACPI: HPET 7FEDFD60, 0038 (r1 HP     30D2      6040000 LOHR       5A)
>ACPI: MCFG 7FEDFD98, 003C (r1 HP     30D2      6040000 LOHR       5A)
>ACPI: TMOR 7FEDFDD4, 0026 (r1 HP     30CC      6040000 PTL         3)
>ACPI: APIC 7FEDFDFA, 0068 (r1 HP     30D2      6040000  LTP        0)
>ACPI: BOOT 7FEDFE62, 0028 (r1 HP     30D2      6040000  LTP        1)
>ACPI: SLIC 7FEDFE8A, 0176 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
>ACPI: SSDT 7FED6D5F, 02DD (r1 HP     30D2         1000 INTL 20061109)
>ACPI: SSDT 7FED61E5, 025F (r1  HP    30D2         3000 INTL 20061109)
>ACPI: SSDT 7FED613F, 00A6 (r1  HP    30D2         3000 INTL 20061109)
>ACPI: SSDT 7FED5C59, 04E6 (r1  HP     30D2        3000 INTL 20061109)
>ACPI: DMI detected: Hewlett-Packard
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519891
>Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHW2120NZ1DT772WAA8-part2 resume=/dev/sda5 splash=silent vga=0x314
>bootsplash: silent mode.
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1662.763 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2068348k/2095936k available (1955k kernel code, 26280k reserved, 1678k data, 264k init, 1178432k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xff8b2000 - 0xfffff000   (7476 kB)
>    pkmap   : 0xff400000 - 0xff600000   (2048 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0495000 - 0xc04d7000   ( 264 kB)
>      .data : 0xc02e8dda - 0xc048c784   (1678 kB)
>      .text : 0xc0100000 - 0xc02e8dda   (1955 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3329.43 BogoMIPS (lpj=6658861)
>Security Framework initialized
>AppArmor: AppArmor initialized <NULL>
>AppArmor: Registered secondary security module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 1011 Objects with 87 Devices 257 Methods 23 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 15 Objects with 3 Devices 9 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0005) - 13 Objects with 0 Devices 4 Methods 0 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>CPU0: Intel(R) Core(TM)2 Duo CPU     T5450  @ 1.66GHz stepping 0d
>Booting processor 1/1 ip 4000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3325.48 BogoMIPS (lpj=6650978)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T5450  @ 1.66GHz stepping 0d
>Total of 2 processors activated (6654.91 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1
>Setting up standard PCI resources
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 8 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:...................................................................
>Initialized 19/23 Regions 4/4 Fields 27/27 Buffers 17/22 Packages (1059 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI
>.
>Executed 1 _INI methods requiring 0 _STA executions (examined 95 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>AppArmor: AppArmor Filesystem Enabled 
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
>system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
>system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
>system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
>system 00:06: ioport range 0x380-0x383 has been reserved
>system 00:06: ioport range 0x680-0x69f has been reserved
>system 00:06: ioport range 0x800-0x80f has been reserved
>system 00:06: ioport range 0x1000-0x107f has been reserved
>system 00:06: ioport range 0x1180-0x11bf has been reserved
>system 00:06: ioport range 0x1640-0x164f has been reserved
>system 00:06: ioport range 0xfe00-0xfe00 has been reserved
>system 00:07: ioport range 0x6a0-0x6af has been reserved
>system 00:07: ioport range 0x6b0-0x6ff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: 0xcc000000-0xceffffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 4000-7fff
>  MEM window: 0xf4000000-0xf5ffffff
>  PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 8000-bfff
>  MEM window: 0xf6000000-0xf7ffffff
>  PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff
>PCI: Bridge: 0000:00:1c.5
>  IO window: c000-cfff
>  MEM window: 0xf8000000-0xf80fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xf8100000-0xf81fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Unpacking initramfs...<7>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> done
>Freeing initrd memory: 4484k freed
>Simple Boot Flag at 0x35 set to 0x1
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1212094773.548:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie02]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>Allocate Port Service[0000:00:1c.5:pcie03]
>vesafb: framebuffer at 0xcd000000, mapped to 0xf8880000, using 3750k, total 14336k
>vesafb: mode is 800x600x16, linelength=1600, pages=2
>vesafb: protected mode interface info at c000:b7b0
>vesafb: pmi: set display start = c00cb813, set palette = c00cb86e
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 95134 bytes
>bootsplash: ...found (800x600, 169778 bytes, v3).
>Console: switching to colour frame buffer device 96x33
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>floppy0: no floppy controllers found
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 264k freed
>Write protecting the kernel read-only data: 1436k
>ACPI: SSDT 7FED6AA1, 01F6 (r1  HP    30D2         3000 INTL 20061109)
>Parsing all Control Methods:
>Table [SSDT](id 007C) - 6 Objects with 0 Devices 3 Methods 0 Regions
>ACPI: SSDT 7FED6444, 05D8 (r1  HP    30D2         3001 INTL 20061109)
>Parsing all Control Methods:
>Table [SSDT](id 007D) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FED6C97, 00C8 (r1  HP    30D2         3000 INTL 20061109)
>Parsing all Control Methods:
>Table [SSDT](id 0084) - 4 Objects with 0 Devices 4 Methods 0 Regions
>ACPI: SSDT 7FED6A1C, 0085 (r1  HP    30D2         3000 INTL 20061109)
>Parsing all Control Methods:
>Table [SSDT](id 0085) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>Marking TSC unstable due to: TSC halts in idle.
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (thermal-0365): AE_BAD_DATA, No critical threshold [20070126]
>No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>Clocksource tsc unstable (delta = -457805557 ns)
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 219
>ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 219
>ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 219
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
>ata4.00: configured for MWDMA2
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20L  NC08 PQ: 0 ANSI: 5
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.3-2-pae uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
> sda1 sda2 sda3 <<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
> sda5<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
> sda6 > sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.3-2-pae uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.3-2-pae uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.3-2-pae uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.3-2-pae uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: EHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25.3-2-pae ehci_hcd
>usb usb6: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25.3-2-pae ehci_hcd
>usb usb7: SerialNumber: 0000:00:1d.7
>PM: Starting manual resume from disk
>hub 7-0:1.0: unable to enumerate USB device on port 3
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 7-4: new high speed USB device using ehci_hcd and address 3
>usb 7-4: configuration #1 chosen from 1 choice
>usb 7-4: New USB device found, idVendor=05ca, idProduct=1812
>usb 7-4: New USB device strings: Mfr=1, Product=0, SerialNumber=0
>usb 7-4: Manufacturer: Ricoh co. Ltd.
>hub 7-0:1.0: unable to enumerate USB device on port 6
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>usb 4-1: New USB device found, idVendor=08ff, idProduct=2580
>usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 4-1: Product: Fingerprint Sensor
>usb 5-2: new full speed USB device using uhci_hcd and address 2
>usb 5-2: configuration #1 chosen from 1 choice
>usb 5-2: New USB device found, idVendor=03f0, idProduct=171d
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2: Product: HP Integrated Module
>usb 5-2: Manufacturer: Broadcom Corp
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>eth0: RTL8101e at 0xf8d90000, 00:1b:24:77:a6:f5, XID 34000000 IRQ 218
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>ACPI: WMI: Mapper loaded
>ACPI: AC Adapter [ACAD] (on-line)
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
>ACPI: Lid Switch [LID]
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>Linux agpgart interface v0.103
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: device:06 is registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input7
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/input/input8
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:07:09.2 [1180:0843] (rev 12)
>ricoh-mmc: Controller is now disabled.
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
>ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f]
>ACPI: Device needs an ACPI driver
>Linux video capture interface: v2.00
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  173.08  Tue Apr  1 23:46:53 PST 2008
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 22)
>ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 21
>sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc0: SDHCI at 0xf8100800 irq 21 DMA
>ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20 (level, low) -> IRQ 20
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[f8100000-f81007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>Driver 'sr' needs updating - please use bus_type methods
>iTCO_vendor_support: vendor-support=0
>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1812)
>input: UVC Camera (05ca:1812) as /devices/pci0000:00/0000:00:1d.7/usb7/7-4/7-4:1.0/input/input9
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (SVN r200)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00241b00a0e73e00]
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>loop: module loaded
>fuse init (API version 7.9)
>type=1505 audit(1212087592.948:2): operation="profile_load" name="/bin/ping" name2="default" pid=1794
>type=1505 audit(1212087593.056:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1795
>type=1505 audit(1212087593.115:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1803
>type=1505 audit(1212087593.219:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1812
>type=1505 audit(1212087593.319:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1833
>type=1505 audit(1212087593.463:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1844
>type=1505 audit(1212087593.615:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1859
>type=1505 audit(1212087593.655:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1881
>type=1505 audit(1212087593.708:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1883
>type=1505 audit(1212087593.760:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1910
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>powernow: This module only works with AMD K7 CPUs
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>r8169: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>NET: Registered protocol family 17
>bootsplash: status on console 0 changed to on
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX AssocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>wlan0: no IPv6 routers present
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: RX deauthentication from 00:1b:11:f9:4d:22 (reason=6)
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX ReassocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>wlan0: disassociate(reason=3)
>ACPI: PCI interrupt for device 0000:02:00.0 disabled
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:1b:11:f9:4d:22
>wlan0: RX authentication from 00:1b:11:f9:4d:22 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:1b:11:f9:4d:22
>wlan0: RX AssocResp from 00:1b:11:f9:4d:22 (capab=0x421 status=0 aid=2)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:1b:11:f9:4d:22)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociate(reason=3)
>wlan0: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=169.254.148.158 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=169.254.148.158 DST=224.0.0.251 LEN=470 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=450 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=169.254.148.158 DST=224.0.0.251 LEN=245 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=225 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=169.254.148.158 DST=224.0.0.251 LEN=470 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=450 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=169.254.148.158 DST=224.0.0.251 LEN=470 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=450 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=169.254.148.158 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=169.254.148.158 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 
>SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=169.254.148.158 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44

Actions: View

Attachments on bug 394333: 217985 | 218824 | 218974 | 244715 | 266663