Attachment 221819 Details for Bug 396220

processor.max_cstate=1

boot.msg.processor.max_cstate=1 (text/plain), 37.43 KB, created by Evgeny Byrganov on 2008-06-12 15:31:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Evgeny Byrganov

Created: 2008-06-12 15:31:37 UTC

Size: 37.43 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.22.17-0.1-default
>Loaded 26163 symbols from /boot/System.map-2.6.22.17-0.1-default.
>Symbols match kernel version 2.6.22.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/02/10 20:01:04 UTC
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000003bfd0000 (usable)
><4> BIOS-e820: 000000003bfd0000 - 000000003bfde000 (ACPI data)
><4> BIOS-e820: 000000003bfde000 - 000000003c000000 (ACPI NVS)
><4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
><4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
><4>Malformed early option 'acpi'
><5>63MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>found SMP MP-table at 000ff780
><7>Entering add_active_range(0, 0, 245712) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  Normal       4096 ->   229376
><4>  HighMem    229376 ->   245712
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->   245712
><7>On node 0 totalpages: 245712
><7>  DMA zone: 32 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 4064 pages, LIFO batch:0
><7>  Normal zone: 1760 pages used for memmap
><7>  Normal zone: 223520 pages, LIFO batch:31
><7>  HighMem zone: 127 pages used for memmap
><7>  HighMem zone: 16209 pages, LIFO batch:3
><6>DMI present.
><6>Using APIC driver default
><4>ACPI: RSDP 000F8CB0, 0014 (r0 ACPIAM)
><4>ACPI: RSDT 3BFD0000, 003C (r1 MSI    1414X    10090007 MSFT       97)
><4>ACPI: FACP 3BFD0200, 0084 (r2 MSI    1414X    10090007 MSFT       97)
><4>ACPI: DSDT 3BFD0440, 4521 (r1    MSI    1414X        7 INTL 20051117)
><4>ACPI: FACS 3BFDE000, 0040
><4>ACPI: APIC 3BFD0390, 0070 (r1 MSI    OEMAPIC  10090007 MSFT       97)
><4>ACPI: MCFG 3BFD0400, 003C (r1 MSI    OEMMCFG  10090007 MSFT       97)
><4>ACPI: OEMB 3BFDE040, 0060 (r1 MSI    AMI_OEM  10090007 MSFT       97)
><4>ACPI: HPET 3BFD4970, 0038 (r1 MSI    OEMHPET0 10090007 MSFT       97)
><4>ACPI: SSDT 3BFD49B0, 014A (r1 A M I  POWERNOW        1 AMD         1)
><6>Nvidia board detected. Ignoring ACPI timer override.
><6>If you got timer trouble try acpi_use_timer_override
><6>ACPI: PM-Timer IO Port: 0x4008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><4>Processor #0 15:12 APIC version 16
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
><6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><4>ACPI: BIOS IRQ0 pin2 override ignored.
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
><7>ACPI: IRQ9 used by override.
><7>ACPI: IRQ14 used by override.
><7>ACPI: IRQ15 used by override.
><4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
><6>ACPI: HPET id: 0x10de8201 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
><4>Built 1 zonelists.  Total pages: 243793
><5>Kernel command line: root=/dev/system/root vga=0x303 processor.max_cstate=1 resume=/dev/sda5 splash=silent acpi=debug
><3>Unknown boot option `processor.max_cstate=1': ignoring
><6>bootsplash: silent mode.
><7>mapped APIC to ffffd000 (fee00000)
><7>mapped IOAPIC to ffffc000 (fec00000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 16384 bytes)
><4>Detected 2009.186 MHz processor.
><7>spurious 8259A interrupt: IRQ7.
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 965984k/982848k available (1829k kernel code, 16268k reserved, 764k data, 228k init, 65344k highmem)
><4>virtual kernel memory layout:
><4>    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)
><4>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
><4>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
><4>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
><4>      .init : 0xc0390000 - 0xc03c9000   ( 228 kB)
><4>      .data : 0xc02c95cb - 0xc0388964   ( 764 kB)
><4>      .text : 0xc0100000 - 0xc02c95cb   (1829 kB)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
><6>hpet0: 3 32-bit timers, 25000000 Hz
><4>Calibrating delay using timer specific routine.. 4021.69 BogoMIPS (lpj=8043390)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 00000119
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 256K (64 bytes/line)
><7>CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 00000119
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><4>Compat vDSO mapped to ffffe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 12k freed
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 4382k freed
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 793 Objects with 75 Devices 237 Methods 17 Regions
><4>Parsing all Control Methods:
><4>Table [SSDT](id 0002) - 4 Objects with 0 Devices 1 Methods 0 Regions
><4> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><4>CPU0: AMD Mobile AMD Sempron(tm) Processor 3600+ stepping 02
><6>Total of 1 processors activated (4021.69 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
><3>..MP-BIOS bug: 8254 timer not connected to IO-APIC
><6>...trying to set up timer (IRQ0) through the 8259A ...  failed.
><6>...trying to set up timer as Virtual Wire IRQ... failed.
><6>...trying to set up timer as ExtINT IRQ... works.
><6>Brought up 1 CPUs
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><3>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
><3>PCI: Not using MMCONFIG.
><6>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 20 to 5F [_GPE] 8 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 1 Runtime GPEs in this block
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 0 Runtime GPEs in this block
><7>ACPI: EC: Look up EC in DSDT
><4>Completing Region/Field/Buffer/Package initialization:.........................................................................................
><4>Initialized 14/17 Regions 13/13 Fields 35/36 Buffers 27/29 Packages (806 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:
><4>Executed 0 _INI methods requiring 0 _STA executions (examined 82 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><4>Error attaching device data
><4>Error attaching device data
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>PCI: Transparent bridge - 0000:00:10.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
><4>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
><4>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
><4>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
><4>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
><4>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
><4>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
><4>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
><4>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
><4>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
><4>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 13 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PnPBIOS: Disabled by ACPI PNP
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>ACPI: RTC can wake from S4
><6>pnp: 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
><6>pnp: 00:08: iomem range 0x0-0x0 could not be reserved
><6>pnp: 00:08: iomem range 0xfee01000-0xfeefffff could not be reserved
><6>pnp: 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
><6>pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
><6>pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
><6>pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
><6>pnp: 00:0c: iomem range 0xc0000-0xcffff could not be reserved
><6>pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
><6>pnp: 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
><6>Time: tsc clocksource has been installed.
><6>PCI: Bridge: 0000:00:03.0
><6>  IO window: c000-cfff
><6>  MEM window: fa300000-faafffff
><6>  PREFETCH window: bdf00000-bfefffff
><6>PCI: Bridge: 0000:00:10.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><7>PCI: Setting latency timer of device 0000:00:03.0 to 64
><7>PCI: Setting latency timer of device 0000:00:10.0 to 64
><6>NET: Registered protocol family 2
><6>Switched to NOHz mode on CPU #0
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
><4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>Machine check exception polling timer started.
><6>audit: initializing netlink socket (disabled)
><5>audit(1213298162.464:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>Boot video device is 0000:00:05.0
><7>PCI: Setting latency timer of device 0000:00:03.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:03.0:pcie00]
><6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1875k, total 65536k
><6>vesafb: mode is 800x600x8, linelength=800, pages=6
><6>vesafb: protected mode interface info at c000:d750
><6>vesafb: pmi: set display start = c00cd786, set palette = c00cd7f0
><6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
><6>vesafb: scrolling: redraw
><6>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
><4>Console: switching to colour frame buffer device 100x37
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><7>hpet_resources: 0xfed00000 is busy
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><4>floppy0: no floppy controllers found
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
><6>i8042.c: Detected active multiplexing controller, rev 1.1.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker as /class/input/input0
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 228k freed
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>pata_amd 0000:00:0d.0: version 0.3.8
><7>PCI: Setting latency timer of device 0000:00:0d.0 to 64
><6>scsi0 : pata_amd
><6>scsi1 : pata_amd
><6>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
><6>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
><6>ata1.01: ATAPI: Optiarc DVD RW AD-7530B, NX02, max UDMA/33
><6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x11a0b1, caps: 0xa04753/0x200000
><6>input: SynPS/2 Synaptics TouchPad as /class/input/input1
><6>input: AT Translated Set 2 keyboard as /class/input/input2
><6>ata1.01: configured for UDMA/33
><5>scsi 0:0:1:0: CD-ROM            Optiarc  DVD RW AD-7530B  NX02 PQ: 0 ANSI: 5
><7>sata_nv 0000:00:0e.0: version 3.4
><4>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:0e.0 to 64
><6>scsi2 : sata_nv
><6>scsi3 : sata_nv
><6>ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e000 irq 16
><6>ata4: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e082 bmdma 0x0001e008 irq 16
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata3.00: ATA-7: WDC WD800BEVS-00RST0, 04.01G04, max UDMA/133
><6>ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata3.00: configured for UDMA/133
><6>ata4: SATA link down (SStatus 0 SControl 300)
><5>scsi 2:0:0:0: Direct-Access     ATA      WDC WD800BEVS-00 04.0 PQ: 0 ANSI: 5
><5>ACPI: processor limited to max C-state 1
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><4>ACPI Exception (processor_core-0789): AE_NOT_FOUND, Processor Device is not present [20070126]
><6>ACPI: Thermal Zone [THRM] (40 C)
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><4>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
><6>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:0b.0 to 64
><6>ohci_hcd 0000:00:0b.0: OHCI Host Controller
><6>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:00:0b.0: irq 17, io mem 0xfebde000
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: OHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.22.17-0.1-default ohci_hcd
><6>usb usb1: SerialNumber: 0000:00:0b.0
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 8 ports detected
><5>sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda:ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
><6>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 21 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:0b.1 to 64
><6>ehci_hcd 0000:00:0b.1: EHCI Host Controller
><6>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
><6>ehci_hcd 0000:00:0b.1: debug port 1
><7>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
><6>ehci_hcd 0000:00:0b.1: irq 18, io mem 0xfebdfc00
><4> sda1 sda2 sda3 sda4 <<6>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><4> sda5<6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: EHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.22.17-0.1-default ehci_hcd
><6>usb usb2: SerialNumber: 0000:00:0b.1
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 8 ports detected
><4> sda6 sda7 sda8 >
><5>sd 2:0:0:0: [sda] Attached SCSI disk
><6>md: linear personality registered for level -1
><6>usb 2-8: new high speed USB device using ehci_hcd and address 3
><4>swsusp: Basic memory bitmaps created
><4>swsusp: Basic memory bitmaps freed
><4>Attempting manual resume
><6>usb 2-8: new device found, idVendor=0db0, idProduct=6877
><6>usb 2-8: new device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 2-8: Product: 802.11 bg WLAN
><6>usb 2-8: Manufacturer: Ralink
><6>usb 2-8: configuration #1 chosen from 1 choice
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on dm-1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>usb 1-4: new low speed USB device using ohci_hcd and address 2
><4>JBD: barrier-based sync failed on dm-1 - disabling barriers
><6>usb 1-4: new device found, idVendor=0458, idProduct=003a
><6>usb 1-4: new device strings: Mfr=2, Product=1, SerialNumber=0
><6>usb 1-4: Product: Optical Mouse
><6>usb 1-4: Manufacturer: Genius      
><6>usb 1-4: configuration #1 chosen from 1 choice
><6>input: Power Button (FF) as /class/input/input3
><6>ACPI: Power Button (FF) [PWRF]
><6>input: Lid Switch as /class/input/input4
><6>usbcore: registered new interface driver hiddev
><6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
><4>rtc_cmos: probe of 00:02 failed with error -16
><6>ACPI: Lid Switch [LID0]
><6>input: Genius       Optical Mouse as /class/input/input5
><6>input: USB HID v1.10 Mouse [Genius       Optical Mouse] on usb-0000:00:0b.0-4
><6>usbcore: registered new interface driver usbhid
><6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
><4>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 0:0:1:0: Attached scsi CD-ROM sr0
><6>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
><6>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
><6>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
><4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
><6>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:14.0 to 64
><6>forcedeth: using HIGHDMA
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>input: Sleep Button (CM) as /class/input/input6
><6>ACPI: Sleep Button (CM) [SLPB]
><6>input: Power Button (CM) as /class/input/input7
><6>ACPI: Power Button (CM) [PWRB]
><4>nvidia: module license 'NVIDIA' taints kernel.
><7>phy0: Selected rate control algorithm 'pid'
><6>ACPI: AC Adapter [ADP1] (on-line)
><6>ACPI: Battery Slot [BAT1] (battery present)
><6>usbcore: registered new interface driver rt73usb
><6>eth0: forcedeth.c: subsystem: 01462:373d bound to 0000:00:14.0
><4>ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
><6>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNEC] -> GSI 19 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:05.0 to 64
><4>NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.05  Mon May 19 00:06:12 PDT 2008
><4>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
><6>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:10.1 to 64
><6>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
><7>ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2337:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2341:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
><7>ALSA sound/pci/hda/hda_codec.c:2349:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
><6>Adding 4891752k swap on /dev/sda5.  Priority:-1 extents:1 across:4891752k
><4>JBD: barrier-based sync failed on dm-1 - disabling barriers
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on dm-0, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><5>REISERFS (device sda2): found reiserfs format "3.6" with standard journal
><5>REISERFS (device sda2): using ordered data mode
><4>reiserfs: using flush barriers
><5>REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>REISERFS (device sda2): checking transaction log (sda2)
><5>REISERFS (device sda2): Using r5 hash to sort names
><6>USB Universal Host Controller Interface driver v3.0
><4>JBD: barrier-based sync failed on dm-1 - disabling barriers
><4>fuse init (API version 7.8)
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Thu Jun 12 19:16:06 2008
>
>Creating device nodes with udev
>  2 logical volume(s) in volume group "system" now active
>  2 logical volume(s) in volume group "system" now active
>Trying manual resume from /dev/sda5
>Invoking userspace resume from /dev/sda5
>boot/82-resume.userspace.sh: line 48: /proc/splash: No such file or directory
>resume: Could not stat configuration file
>resume: libgcrypt version: 1.2.4
>Trying manual resume from /dev/sda5
>Invoking in-kernel resume from /dev/sda5
>Waiting for device /dev/system/root to appear:  ok
>fsck 1.40.2 (12-Jul-2007)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/system/root 
>/dev/system/root: clean, 312164/1572864 files, 1538519/3145728 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/system/root
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu Jun 12 23:16:11 2008
>
>done
>Starting udevd: udevd-event[1731]: node_symlink: device node '/dev/rtc' already exists, link to '/dev/rtc0' will not overwrite it
>
>done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/mapper/system-root is already mounted on /
>
>Activating device mapper...
>done
>Waiting for udev to settle...
>Scanning for LVM volume groups...
>  Reading all physical volumes.  This may take a while...
>  Found volume group "system" using metadata type lvm2
>Activating LVM volume groups...
>  2 logical volume(s) in volume group "system" now active
>done
>Checking file systems...
>fsck 1.40.2 (12-Jul-2007)
>/dev/disk/by-id/scsi-SATA_WDC_WD800BEVS-0_WD-WXCZ07A96936-part1: clean, 66/263296 files, 48463/526120 blocks
>/dev/system/home: recovering journal
>Reiserfs super block in block 16 on 0x802 of format 3.6 with standard journal
>Blocks (total/free): 2622608/211986 by 4096 bytes
>Filesystem is NOT clean
>Replaying journal: Trans replayed: mountid 74, transid 24038, desc 6961, len 1, commit 6963, next trans offset 6946
>
>Replaying journal: |                                        |  1.0%  1 trans
>
>                                                                                
>
><progress bar skipped>
>Replaying journal: Done.
>Reiserfs journal '/dev/disk/by-id/scsi-SATA_WDC_WD800BEVS-0_WD-WXCZ07A96936-part2' in blocks [18..8211]: 1 transactions replayed
>/dev/system/home: clean, 105732/3145728 files, 5131362/6291456 blocks
>Checking internal tree..  ^H\^H|^H/^H-^H\^Hfinished
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda1 on /boot type ext3 (rw,acl,user_xattr)
>/dev/mapper/system-home on /home type ext3 (rw,noatime,acl,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0)
>/dev/sda2 on /mnt/sled10 type reiserfs (rw)
>doneSetting up the hardware clockdone
>Activating crypto devices using /etc/crypttab ... 
>ehci-hcd ohci-hcd uhci-hcd usb-ohci usb-uhci Loading keymap i386/qwerty/us.map.gz
>doneStart Unicode mode
>doneLoading console font Cyr_a8x16.psfu  -m trivial G0:loadable
>donePlease enter passphrase for /boot/private (cr_private): Please enter passphrase for /boot/private (cr_private): Please enter passphrase for /boot/private (cr_private): /boot/private...done
>Loading fuse module done
>Mounting fuse control filesystemdone
>Configuring serial ports...
>Configured serial ports
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
><notice>killproc: kill(1138,29)
>Activating remaining swap-devices in /etc/fstab...
>doneCreating /var/log/boot.msg
>doneTurning quota on
>Checking quotas. This may take some time.
>/dev/mapper/system-root [/]: group quotas turned on
>/dev/mapper/system-root [/]: user quotas turned on
>/dev/mapper/system-home [/home]: group quotas turned on
>/dev/mapper/system-home [/home]: user quotas turned on
>done
>Setting up hostname 'aire'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>Can't determine current runlevel
>done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1138,3)
>
>INIT: 
>Boot logging started on /dev/tty1(/dev/console) at Thu Jun 12 19:16:29 2008
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Entering runlevel: 5
>
>
><notice> ], [startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/resmgrd ]
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>Starting resource managerdone
>Starting D-Bus daemonUnknown username "gdm" in message bus configuration file
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/acpid ]
>acpid: starting up
>
>
>Starting acpid done
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=37 SHLVL=2 HOME=/ SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>done
><notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>Starting ConsoleKitdone
>Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>done
>Loading CPUFreq modulesdone
><notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=ru_RU.UTF-8 PREVLEVEL=N LINES=37 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=no splash=silent ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>Starting service kdmdone
>Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>done
><notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ]
><notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
><notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
>Starting the DHCP DBUS Daemondone
>Starting the NetworkManagerDispatcherdone
>Starting the NetworkManagerdone
>Mount CIFS File Systems unused
><notice>checkproc: /opt/kde3/bin/kdm 2629
>Loading keymap i386/qwerty/us.map.gz
>doneLoading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font Cyr_a8x16.psfu  -m trivial G0:loadable
>done<notice>checkproc: /opt/kde3/bin/kdm 2629
><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/auditd ]
>Starting auditd done
><notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
>Starting Avahi daemon.done
><notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>Starting Avahi DNS Configuration daemondone
>Starting hotkey-setup done
>Starting irqbalance unused
><notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>Try to get initial date and time via NTP from 0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.orgError : Temporary failure in name resolution
>Error : Temporary failure in name resolution
>Error : Temporary failure in name resolution
>failed
>Starting network time protocol daemon (NTPD)done
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/portmap ]
>Starting RPC portmap daemondone
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>Starting cupsddone
>Starting mail service (Postfix)done
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>Starting CRON daemondone
>Starting powersaved: <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>done
><notice>startproc: execve (/usr/sbin/rpc.rquotad) [ /usr/sbin/rpc.rquotad ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/rpc.rquotad ]
>Starting rquota daemon done
>Initializing random number generatordone
><notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
>Starting smartd done
>Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=100 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x303 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=37 HOME=/ SHLVL=2 splash=silent SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>done
>Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
>done
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: smbfs irq_balancer splash
><notice>killproc: kill(2425,3)

Actions: View

Attachments on bug 396220: 221818 | 221819 | 221847 | 223560 | 223561 | 223625 | 224426 | 227316 | 227473 | 227475