Attachment 229932 Details for Bug 393675

full kernel boot log as suggested by Tejun Heo

bootlog.txt (text/plain), 27.60 KB, created by Dmitri Chubarov on 2008-07-25 06:26:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dmitri Chubarov

Created: 2008-07-25 06:26:52 UTC

Size: 27.60 KB

patch

obsolete

>Linux version 2.6.25.11-0.1-pae (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-07-13 20:48:28 +0200
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
> BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00ff780] 000ff780
>Entering add_active_range(0, 0, 262064) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262064
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262064
>On node 0 totalpages: 262064
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32433 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FB2A0, 0014 (r0 ACPIAM)
>ACPI: RSDT 3FFB0000, 0034 (r1 A M I  OEMRSDT   9000426 MSFT       97)
>ACPI: FACP 3FFB0200, 0081 (r1 A M I  OEMFACP   9000426 MSFT       97)
>ACPI: DSDT 3FFB0400, 6848 (r1  A0045 A0045001        1 INTL  2002026)
>ACPI: FACS 3FFBE000, 0040
>ACPI: APIC 3FFB0390, 0070 (r1 A M I  OEMAPIC   9000426 MSFT       97)
>ACPI: OEMB 3FFBE040, 0046 (r1 A M I  AMI_OEM   9000426 MSFT       97)
>ACPI: MCFG 3FFB6C50, 003C (r1 A M I  OEMMCFG   9000426 MSFT       97)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260017
>Kernel command line: root=/dev/disk/by-label/SUSE resume=/dev/sda3 splash=silent vga=0x314 combined_mode=libata
>bootsplash: silent mode.
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3010.728 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1028880k/1048256k available (1953k kernel code, 18724k reserved, 1676k data, 264k init, 130752k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xff8b2000 - 0xfffff000   (7476 kB)
>    pkmap   : 0xff400000 - 0xff600000   (2048 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0493000 - 0xc04d5000   ( 264 kB)
>      .data : 0xc02e85e2 - 0xc048b784   (1676 kB)
>      .text : 0xc0100000 - 0xc02e85e2   (1953 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>Calibrating delay using timer specific routine.. 6027.49 BogoMIPS (lpj=12054987)
>Security Framework initialized
>AppArmor: AppArmor initialized <NULL>
>AppArmor: Registered secondary security module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 726 Objects with 56 Devices 189 Methods 21 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
>Booting processor 1/1 ip 4000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6021.80 BogoMIPS (lpj=12043614)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
>Total of 2 processors activated (12049.30 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>CPU1 attaching sched-domain:
> domain 0: span 00000000,00000000,00000000,00000003
>  groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001
>  domain 1: span 00000000,00000000,00000000,00000003
>   groups: 00000000,00000000,00000000,00000003
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
>PCI: Using configuration type 1
>Setting up standard PCI resources
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 11 Wake, Enabled 0 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:........................................................................................................................................................
>Initialized 16/21 Regions 30/30 Fields 43/43 Buffers 63/78 Packages (735 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:
>Executed 0 _INI methods requiring 0 _STA executions (examined 60 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  CE, should be C1 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 18 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>AppArmor: AppArmor Filesystem Enabled 
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
>system 00:08: ioport range 0x290-0x297 has been reserved
>system 00:09: ioport range 0x4d0-0x4d1 has been reserved
>system 00:09: ioport range 0x800-0x87f has been reserved
>system 00:09: ioport range 0x400-0x41f has been reserved
>system 00:09: ioport range 0x480-0x4bf has been reserved
>system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
>system 00:0b: iomem range 0xffc00000-0xfff7ffff could not be reserved
>system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:10: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:11: iomem range 0x0-0x9ffff could not be reserved
>system 00:11: iomem range 0x0-0x0 could not be reserved
>system 00:11: iomem range 0xe0000-0xfffff could not be reserved
>system 00:11: iomem range 0x100000-0x3fffffff could not be reserved
>system 00:11: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: 0xcff00000-0xcfffffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: d000-dfff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: c000-cfff
>  MEM window: 0xcfe00000-0xcfefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: 0xcfd00000-0xcfdfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Unpacking initramfs... done
>Freeing initrd memory: 5154k freed
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1216987904.704:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:04:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 16384k
>vesafb: mode is 800x600x16, linelength=1600, pages=16
>vesafb: protected mode interface info at c000:b4f6
>vesafb: pmi: set display start = c00cb584, set palette = c00cb5c4
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 95134 bytes
>bootsplash: ...found (800x600, 132866 bytes, v3).
>Console: switching to colour frame buffer device 96x33
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>registered taskstats version 1
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>Freeing unused kernel memory: 264k freed
>Write protecting the kernel read-only data: 1432k
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: ACPI0007:01 is registered as cooling_device1
>No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xcfcffc00 port 0xcfcffd00 irq 19
>ata2: SATA max UDMA/133 abar m1024@0xcfcffc00 port 0xcfcffd80 irq 19
>ata3: SATA max UDMA/133 abar m1024@0xcfcffc00 port 0xcfcffe00 irq 19
>ata4: SATA max UDMA/133 abar m1024@0xcfcffc00 port 0xcfcffe80 irq 19
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-6: ST3120827AS, 3.42, max UDMA/133
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      ST3120827AS      3.42 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata5.00: ATAPI: PIONEER DVD-RW  DVR-109, 1.17, max UDMA/66
>ata5.00: configured for UDMA/66
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-109  1.17 PQ: 0 ANSI: 5
>SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>Driver 'sd' needs updating - please use bus_type methods
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xcfcff800
>USB Universal Host Controller Interface driver v3.0
> sda:<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> sda1 sda2 sda3 sda4 <<6>usb usb1: configuration #1 chosen from 1 choice
> sda5<6>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
> sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25.11-0.1-pae ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009880
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 1
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25.11-0.1-pae uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009c00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 1-0:1.0: unable to enumerate USB device on port 2
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25.11-0.1-pae uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25.11-0.1-pae uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a080
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25.11-0.1-pae uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: New USB device found, idVendor=046d, idProduct=c03e
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB-PS/2 Optical Mouse
>usb 2-1: Manufacturer: Logitech
>usb 2-2: new low speed USB device using uhci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>usb 2-2: New USB device found, idVendor=051d, idProduct=0002
>usb 2-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>usb 2-2: Product: Back-UPS CS 350 FW:807.q5.I USB FW:q5
>usb 2-2: Manufacturer: American Power Conversion
>usb 2-2: SerialNumber: BB0514025251  
>usbcore: registered new interface driver hiddev
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
>hiddev96hidraw1: USB HID v1.10 Device [American Power Conversion Back-UPS CS 350 FW:807.q5.I USB FW:q5] on usb-0000:00:1d.0-2
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>PM: Starting manual resume from disk
>XFS mounting filesystem sda1
>Ending clean XFS mount for filesystem: sda1
>Linux agpgart interface v0.103
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>sky2 0000:02:00.0: v1.21 addr 0xcfefc000 irq 17 Yukon-EC (0xb6) rev 1
>sky2 eth0: addr 00:11:d8:12:50:5c
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button (FF) [PWRF]
>intel_rng: FWH not detected
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
>ACPI: Device needs an ACPI driver
>ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[cfdff800-cfdfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>ppdev: user-space parallel port driver
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>hda_intel: position_fix set to 1 for device 1043:813d
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>Adding 2409740k swap on /dev/sda3.  Priority:-1 extents:1 across:2409740k
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180000bc983d]
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>type=1505 audit(1216962719.619:2): operation="profile_load" name="/bin/ping" name2="default" pid=1510
>type=1505 audit(1216962719.715:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1563
>type=1505 audit(1216962719.792:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1571
>type=1505 audit(1216962719.843:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1585
>type=1505 audit(1216962719.928:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1587
>type=1505 audit(1216962720.007:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1613
>type=1505 audit(1216962720.039:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1615
>type=1505 audit(1216962720.103:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1617
>type=1505 audit(1216962720.179:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1641
>type=1505 audit(1216962720.219:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1647
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>powernow: This module only works with AMD K7 CPUs
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>NET: Registered protocol family 17
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>[drm] Initialized radeon 1.28.0 20060524 on minor 0
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>warning: `ntpd' uses deprecated v2 capabilities in a way that may be insecure.
>eth0: no IPv6 routers present
>[drm] Loading R300 Microcode
>[drm] Loading R300 Microcode
>[drm] Loading R300 Microcode
>[drm] Loading R300 Microcode
>ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
>ata1.00: cmd 61/40:00:38:45:54/00:00:02:00:00/40 tag 0 ncq 32768 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata1.00: status: { DRDY }
>ata1: soft resetting link
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: softreset failed (device not ready)
>ata1: hard resetting link
>ata1: port is slow to respond, please be patient (Status 0x80)
>ata1: COMRESET failed (errno=-16)
>ata1: hard resetting link
>[drm] Loading R300 Microcode
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[drm] Loading R300 Microcode
>ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
>ata1.00: cmd 61/40:00:d0:89:54/00:00:02:00:00/40 tag 0 ncq 32768 out
>         res 40/00:00:47:2f:55/00:00:02:00:00/40 Emask 0x4 (timeout)
>ata1.00: status: { DRDY }
>ata1: soft resetting link
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: softreset failed (device not ready)
>ata1: hard resetting link
>ata1: port is slow to respond, please be patient (Status 0x80)
>ata1: COMRESET failed (errno=-16)
>ata1: hard resetting link
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>martian source 255.255.255.255 from 192.168.0.255, on dev eth0
>ll header: ff:ff:ff:ff:ff:ff:00:0e:a6:68:f3:96:08:00

Actions: View

Attachments on bug 393675: 229930 | 229932 | 230800 | 230801 | 230802 | 230944 | 230948