Attachment 229942 Details for Bug 411797

opensuse 10.3 boot.msg

boot_10.3.msg (text/plain), 34.10 KB, created by Michele Cherici on 2008-07-25 07:30:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michele Cherici

Created: 2008-07-25 07:30:47 UTC

Size: 34.10 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.22.9-0.4-default
>Loaded 26157 symbols from /boot/System.map-2.6.22.9-0.4-default.
>Symbols match kernel version 2.6.22.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.22.9-0.4-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/10/05 21:32:04 UTC
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
><4> BIOS-e820: 000000003ffa0000 - 000000003ffb0000 (ACPI data)
><4> BIOS-e820: 000000003ffb0000 - 000000003fff0000 (ACPI NVS)
><4> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
><4> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
><5>127MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>found SMP MP-table at 000ff780
><7>Entering add_active_range(0, 0, 262048) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  Normal       4096 ->   229376
><4>  HighMem    229376 ->   262048
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->   262048
><7>On node 0 totalpages: 262048
><7>  DMA zone: 32 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 4064 pages, LIFO batch:0
><7>  Normal zone: 1760 pages used for memmap
><7>  Normal zone: 223520 pages, LIFO batch:31
><7>  HighMem zone: 255 pages used for memmap
><7>  HighMem zone: 32417 pages, LIFO batch:7
><6>DMI 2.3 present.
><6>Using APIC driver default
><4>ACPI: RSDP 000FA9F0, 0021 (r2 ACPIAM)
><4>ACPI: XSDT 3FFA0100, 003C (r1 A M I  OEMXSDT  12000613 MSFT       97)
><4>ACPI: FACP 3FFA0290, 00F4 (r3 A M I  OEMFACP  12000613 MSFT       97)
><4>ACPI: DSDT 3FFA03E0, 42E1 (r1  A0310 A0310001        1 MSFT  100000D)
><4>ACPI: FACS 3FFB0000, 0040
><4>ACPI: APIC 3FFA0390, 004A (r1 A M I  OEMAPIC  12000613 MSFT       97)
><4>ACPI: OEMB 3FFB0040, 003F (r1 A M I  OEMBIOS  12000613 MSFT       97)
><6>ACPI: PM-Timer IO Port: 0x808
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><4>Processor #0 15:12 APIC version 16
><6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
><4>Built 1 zonelists.  Total pages: 260001
><5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 vga=0x31a resume=/dev/sda5 splash=silent
><6>bootsplash: silent mode.
><7>mapped APIC to ffffd000 (fee00000)
><7>mapped IOAPIC to ffffc000 (fec00000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 16384 bytes)
><4>Detected 1800.299 MHz processor.
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 1030992k/1048192k available (1824k kernel code, 16432k reserved, 761k data, 228k init, 130688k highmem)
><4>virtual kernel memory layout:
><4>    fixmap  : 0xffdf4000 - 0xfffff000   (2092 kB)
><4>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
><4>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
><4>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
><4>      .init : 0xc038e000 - 0xc03c7000   ( 228 kB)
><4>      .data : 0xc02c832b - 0xc0386964   ( 761 kB)
><4>      .text : 0xc0100000 - 0xc02c832b   (1824 kB)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 3604.64 BogoMIPS (lpj=7209281)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 128K (64 bytes/line)
><7>CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><4>Compat vDSO mapped to ffffe000.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 12k freed
><6>Unpacking initramfs... done
><6>Freeing initrd memory: 4036k freed
><6>ACPI: Core revision 20070126
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 657 Objects with 56 Devices 174 Methods 29 Regions
><4> tbxface-0587 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><4>CPU0: AMD Sempron(tm) Processor 3000+ stepping 00
><6>Total of 1 processors activated (3604.64 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
><6>Brought up 1 CPUs
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><4>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
><4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
><4>Completing Region/Field/Buffer/Package initialization:........................................................................................................................................................
><4>Initialized 28/29 Regions 49/49 Fields 44/44 Buffers 31/31 Packages (666 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:
><4>Executed 0 _INI methods requiring 0 _STA executions (examined 59 objects)
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>PCI: enabled onboard AC97/MC97 devices
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 14 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PnPBIOS: Disabled by ACPI PNP
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>ACPI: RTC can wake from S4
><6>pnp: 00:08: ioport range 0x290-0x297 has been reserved
><6>pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
><6>pnp: 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
><6>pnp: 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved
><6>pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
><6>pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved
><6>pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
><6>pnp: 00:0d: iomem range 0x100000-0x3ffeffff could not be reserved
><6>Time: tsc clocksource has been installed.
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: e000-efff
><6>  MEM window: fbd00000-fbffffff
><6>  PREFETCH window: d0000000-faffffff
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
><4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>Machine check exception polling timer started.
><6>audit: initializing netlink socket (disabled)
><5>audit(1216883582.352:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>PCI: VIA PCI bridge detected. Disabling DAC.
><7>Boot video device is 0000:01:00.0
><6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 16384k
><6>vesafb: mode is 1280x1024x16, linelength=2560, pages=5
><6>vesafb: protected mode interface info at c000:57e1
><6>vesafb: pmi: set display start = c00c5875, set palette = c00c58c1
><6>vesafb: pmi: ports = e010 e016 e054 e038 e03c e05c e000 e004 e0b0 e0b2 e0b4 
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 98233 bytes
><6>bootsplash: ...found (1280x1024, 35219 bytes, v3).
><4>Console: switching to colour frame buffer device 156x60
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>Switched to NOHz mode on CPU #0
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>input: PC Speaker as /class/input/input1
><6>input: PS2++ Logitech Wheel Mouse as /class/input/input2
><6>NET: Registered protocol family 1
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 228k freed
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><7>sata_via 0000:00:0f.0: version 2.2
><6>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16
><6>sata_via 0000:00:0f.0: routed to hard irq line 10
><6>scsi0 : sata_via
><6>scsi1 : sata_via
><6>ata1: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001c802 bmdma 0x0001b800 irq 16
><6>ata2: SATA max UDMA/133 cmd 0x0001c400 ctl 0x0001c002 bmdma 0x0001b808 irq 16
><6>ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
><6>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
><7>pata_via 0000:00:0f.1: version 0.3.1
><6>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
><6>scsi2 : pata_via
><6>scsi3 : pata_via
><6>ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
><6>ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
><6>ata3.00: ATA-7: Maxtor 6L250R0, BAH41G10, max UDMA/133
><6>ata3.00: 490234752 sectors, multi 16: LBA48 
><6>ata3.00: configured for UDMA/133
><6>ata4.00: ATAPI: _NEC DVD_RW ND-4571A, 1-01, max UDMA/33
><6>ata4.00: configured for UDMA/33
><5>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6L250R0   BAH4 PQ: 0 ANSI: 5
><5>scsi 3:0:0:0: CD-ROM            _NEC     DVD_RW ND-4571A  1-01 PQ: 0 ANSI: 5
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
><6>uhci_hcd 0000:00:10.0: UHCI Host Controller
><6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:10.0: irq 17, io base 0x0000a000
><6>usb usb1: new device found, idVendor=0000, idProduct=0000
><6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:10.0
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><5>sd 2:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
><6>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 17
><6>uhci_hcd 0000:00:10.1: UHCI Host Controller
><6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:10.1: irq 17, io base 0x0000a400
><6>usb usb2: new device found, idVendor=0000, idProduct=0000
><6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:10.1
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 2:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 17
><6>ehci_hcd 0000:00:10.4: EHCI Host Controller
><6>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3
><6>ehci_hcd 0000:00:10.4: irq 17, io mem 0xfb900000
><6>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb3: new device found, idVendor=0000, idProduct=0000
><6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: EHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.22.9-0.4-default ehci_hcd
><6>usb usb3: SerialNumber: 0000:00:10.4
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 8 ports detected
><6> sda: sda1 sda2 < sda5 sda6 sda7 >
><5>sd 2:0:0:0: [sda] Attached SCSI disk
><6>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 17
><6>uhci_hcd 0000:00:10.2: UHCI Host Controller
><6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:10.2: irq 17, io base 0x0000a800
><6>usb usb4: new device found, idVendor=0000, idProduct=0000
><6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:10.2
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 17
><6>uhci_hcd 0000:00:10.3: UHCI Host Controller
><6>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:10.3: irq 17, io base 0x0000b000
><6>usb usb5: new device found, idVendor=0000, idProduct=0000
><6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: UHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.22.9-0.4-default uhci_hcd
><6>usb usb5: SerialNumber: 0000:00:10.3
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><4>swsusp: Basic memory bitmaps created
><4>swsusp: Basic memory bitmaps freed
><4>Attempting manual resume
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda7, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
><3>8139cp 0000:00:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
><3>8139cp 0000:00:0c.0: Try the "8139too" driver instead.
><3>8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
><3>8139cp 0000:00:0d.0: Try the "8139too" driver instead.
><6>8139too Fast Ethernet driver 0.9.28
><6>ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 18
><6>eth0: RealTek RTL8139 at 0xf881e000, 00:e0:4c:59:0a:29, IRQ 18
><7>eth0:  Identified 8139 chip type 'RTL-8139C'
><6>ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 19
><6>eth1: RealTek RTL8139 at 0xf8820000, 00:e0:4c:59:6d:f4, IRQ 19
><7>eth1:  Identified 8139 chip type 'RTL-8139C'
><5>sd 2:0:0:0: Attached scsi generic sg0 type 0
><5>scsi 3:0:0:0: Attached scsi generic sg1 type 5
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 3:0:0:0: Attached scsi CD-ROM sr0
><6>agpgart: Detected AGP bridge 0
><6>agpgart: AGP aperture is 128M @ 0xc8000000
><6>parport_pc 00:0c: reported by Plug and Play ACPI
><6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
><6>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
><6>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 20
><6>eth2: VIA Rhine II at 0x19800, 00:15:f2:c3:63:32, IRQ 20.
><6>eth2: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
><6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
><4>rtc_cmos: probe of 00:02 failed with error -16
><4>PCI: Enabling device 0000:00:11.5 (0000 -> 0001)
><6>ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:11.5 to 64
><6>input: Power Button (FF) as /class/input/input3
><6>ACPI: Power Button (FF) [PWRF]
><6>input: Power Button (CM) as /class/input/input4
><6>ACPI: Power Button (CM) [PWRB]
><3>ALSA sound/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000]
><3>ALSA sound/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000]
><3>ALSA sound/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000]
><3>ALSA sound/pci/via82xx.c:581: codec_read: codec 0 is not valid [0xfe0000]
><4>PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
><6>ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:11.6 to 64
><6>ACPI: PCI interrupt for device 0000:00:11.6 disabled
><4>VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
><6>Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1 across:2104472k
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>loop: module loaded
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda6, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>AppArmor: AppArmor initialized
><5>audit(1216883608.853:2):  type=1505 info="AppArmor initialized" pid=1878
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Thu Jul 24 07:13:03 2008
>
>Creating device nodes with udev
>Trying manual resume from /dev/sda5
>Invoking userspace resume from /dev/sda5
>resume: Could not stat configuration file
>resume: libgcrypt version: 1.2.4
>Trying manual resume from /dev/sda5
>Invoking in-kernel resume from /dev/sda5
>Waiting for device /dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 to appear:  ok
>fsck 1.40.2 (12-Jul-2007)
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 
>/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7: recovering journal
>/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7: clean, 183870/10452992 files, 3023051/20884492 blocks
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Thu Jul 24 09:13:09 2008
>
>done
>Starting udevd udevd-event[1687]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it
>
>done
>Loading required kernel modules
>doneActivating swap-devices in /etc/fstab...
>donemount: according to mtab, /dev/sda7 is already mounted on /
>
>Activating device mapper...
>done
>Checking file systems...
>fsck 1.40.2 (12-Jul-2007)
>/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part6: recovering journal
>/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part6: clean, 219427/9502720 files, 10123242/18982797 blocks
>/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part1: recovering journal
>/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part1: Clearing orphaned inode 6996465 (uid=1001, gid=100, mode=0140755, size=0)
>/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part1: Clearing orphaned inode 9815838 (uid=0, gid=0, mode=0100600, size=217016)
>/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part1: clean, 198758/10452992 files, 3216379/20884492 blocks
>donedone
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>debugfs on /sys/kernel/debug type debugfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda6 on /discoestraibile type ext3 (rw,acl,user_xattr)
>/dev/sda1 on /suse102 type ext3 (rw)
>doneMounting securityfs on /sys/kernel/security done
>Loading AppArmor module done
>Loading AppArmor profiles done
><notice>killproc: kill(1083,29)
>Creating /var/log/boot.msg
>doneSetting up hostname 'linux-ufficio'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>Setting up the hardware clockdone
>Checking for network time protocol daemon (NTPD): unused
>Can't determine current runlevel
>done
>Activating remaining swap-devices in /etc/fstab...
>doneConfiguring serial ports...
>/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
>Configured serial ports
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>fs.inotify.max_user_watches = 65536
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>System Boot Control: The system has been set up
>Skipped features: boot.cycle
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1083,3)
>
>INIT: 
>Boot logging started on /dev/tty1(/dev/console) at Thu Jul 24 09:13:34 2008
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Entering runlevel: 5
>
>
><notice> ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrdStarting resource managerdone
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Starting D-Bus daemonUnknown username "gdm" in message bus configuration file
>done
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/sbin/acpid ]
>Starting acpid done
>Starting ConsoleKit<notice>startproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ]
>done
>Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>done
>Loading CPUFreq modulesdone
>Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=it_IT.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>done
>Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>done
>Loading keymap i386/qwerty/it.map.gz
>doneLoading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneSetting up network interfaces:
>Starting irqbalance unused
>Initializing random number generatordone
>    lo        
>    lo        IP address: 127.0.0.1/8   
>Checking for network time protocol daemon (NTPD): unused
>done    eth0      device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>              No configuration found for eth0
>unused    eth1      device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>              No configuration found for eth1
>unused    eth2      device: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
>    eth2      IP address: 192.168.0.1/24   
>Checking for network time protocol daemon (NTPD): unused
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
><notice>checkproc: /opt/kde3/bin/kdm 2344
>Starting auditd <notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/sbin/auditd ]
>done
>Starting Avahi daemon<notice>startproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ]
>done
>Starting Avahi DNS Configuration daemon<notice>startproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ]
>done
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/sbin/portmap ]
>Starting Name Service Cache Daemondone
>Starting RPC portmap daemondone
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>Starting cupsddone
>Starting mail service (Postfix)<notice>checkproc: /opt/kde3/bin/kdm 2344
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
>done
>Starting powersaved: done
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>Starting CRON daemondone
><notice>startproc: execve (/usr/sbin/rpc.mountd) [ /usr/sbin/rpc.mountd --no-nfs-version 4 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/rpc.mountd ]
><notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/smartd ]
><notice>startproc: execve (/usr/sbin/rpc.statd) [ /usr/sbin/rpc.statd --no-notify ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/rpc.statd ]
>Starting smartd done
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_Maxtor_6L250R0_L50SRFSG-part7 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting kernel based NFS server: mountd statd nfsd sm-notifyBackgrounding to notify hosts...
>done
>Starting SSH daemondone
>Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
>done
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: irq_balancer
><notice>killproc: kill(2125,3)

Actions: View

Attachments on bug 411797: 229692 | 229694 | 229695 | 229698 | 229941 | 229942 | 230661 | 230662 | 231461 | 231462 | 231555 | 235229 | 253787