Bugzilla – Attachment 248627 Details for
Bug 439431
YaST2 hangs on printer configuration
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
not what you will need: crash not reproduced
dmesg.superfluous-file (text/plain), 172.88 KB, created by
Elmar Stellnberger
on 2008-10-29 16:00:03 UTC
(
hide
)
Description:
not what you will need: crash not reproduced
Filename:
MIME Type:
Creator:
Elmar Stellnberger
Created:
2008-10-29 16:00:03 UTC
Size:
172.88 KB
patch
obsolete
>Linux version 2.6.25.18-0.2-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-10-21 16:30:26 +0200 >Command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXC108372622-part5 resume=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXC108824916-part7 splash=silent vga=0x314 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009b400 (usable) > BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) > BIOS-e820: 000000007fed0000 - 000000007fedc000 (ACPI NVS) > BIOS-e820: 000000007fedc000 - 0000000080000000 (reserved) > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) > BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) > BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) >Entering add_active_range(0, 0, 155) 0 entries of 3200 used >Entering add_active_range(0, 256, 523984) 1 entries of 3200 used >end_pfn_map = 1048576 >DMI present. >ACPI: RSDP 000F8000, 0024 (r2 PTLTD ) >ACPI: XSDT 7FED24D6, 007C (r1 FSC PC 6040000 LTP 0) >ACPI: FACP 7FED8C6C, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1) >ACPI: DSDT 7FED3AE1, 5117 (r2 ECS F44 6040000 INTL 20050624) >ACPI: FACS 7FEDBFC0, 0040 >ACPI: HPET 7FED8D60, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) >ACPI: MCFG 7FED8D98, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) >ACPI: TMOR 7FED8DD4, 0026 (r1 PTLTD 6040000 PTL 3) >ACPI: APIC 7FED8DFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) >ACPI: BOOT 7FED8E62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) >ACPI: SLIC 7FED8E8A, 0176 (r1 FSC PC 6040000 LTP 0) >ACPI: SSDT 7FED3804, 02DD (r1 SataRe SataAhci 1000 INTL 20050624) >ACPI: SSDT 7FED2B0E, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) >ACPI: SSDT 7FED2A68, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) >ACPI: SSDT 7FED2552, 0516 (r1 PmRef CpuPm 3000 INTL 20050624) >ACPI: DMI detected: Fujitsu Siemens >No NUMA configuration found >Faking a node at 0000000000000000-000000007fed0000 >Entering add_active_range(0, 0, 155) 0 entries of 3200 used >Entering add_active_range(0, 256, 523984) 1 entries of 3200 used >Bootmem setup node 0 0000000000000000-000000007fed0000 > NODE_DATA [000000000000c000 - 0000000000013fff] > bootmap [0000000000014000 - 0000000000023fdf] pages 10 >early res: 0 [0-fff] BIOS data page >early res: 1 [6000-7fff] SMP_TRAMPOLINE >early res: 2 [200000-8b7bd7] TEXT DATA BSS >early res: 3 [37a8d000-37fef900] RAMDISK >early res: 4 [9b400-a03ff] EBDA >early res: 5 [8000-bfff] PGTABLE > [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 > [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 > [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 > [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 > [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 > [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 > [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 > [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 > [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 > [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 > [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 > [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 > [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 > [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 >Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 >Movable zone start PFN for each node >early_node_map[2] active PFN ranges > 0: 0 -> 155 > 0: 256 -> 523984 >On node 0 totalpages: 523883 > DMA zone: 56 pages used for memmap > DMA zone: 1733 pages reserved > DMA zone: 2206 pages, LIFO batch:0 > DMA32 zone: 7107 pages used for memmap > DMA32 zone: 512781 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Movable zone: 0 pages used for memmap >ACPI: PM-Timer IO Port: 0x1008 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >Processor #0 (Bootup-CPU) >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >Processor #1 >ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Setting APIC routing to flat >ACPI: HPET id: 0x8086a201 base: 0xfed00000 >Using ACPI (MADT) for SMP configuration information >PM: Registered nosave memory: 000000000009b000 - 000000000009c000 >PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 >PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000 >PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000 >PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000 >PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 >Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) >SMP: Allowing 2 CPUs, 0 hotplug CPUs >PERCPU: Allocating 47936 bytes of per cpu data >Built 1 zonelists in Node order, mobility grouping on. Total pages: 514987 >Policy zone: DMA32 >Kernel command line: root=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXC108372622-part5 resume=/dev/disk/by-id/scsi-SATA_WDC_WD2500BEVS-_WD-WXC108824916-part7 splash=silent vga=0x314 >bootsplash: silent mode. >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 32768 bytes) >Extended CMOS year: 2000 >TSC calibrated against PM_TIMER >time.c: Detected 2493.773 MHz processor. >Console: colour dummy device 80x25 >console [tty0] enabled >Checking aperture... >Calgary: detecting Calgary via BIOS EBDA area >Calgary: Unable to locate Rio Grande table in EBDA - bailing! >Memory: 2054132k/2095936k available (2367k kernel code, 41400k reserved, 1926k data, 404k init) >CPA: page pool initialized 1 of 1 pages preallocated >hpet clockevent registered >Calibrating delay using timer specific routine.. 4992.49 BogoMIPS (lpj=9984991) >Security Framework initialized >AppArmor: AppArmor initialized <NULL> >AppArmor: Registered secondary security module capability >Capability LSM initialized as secondary >Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) >Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) >Mount-cache hash table entries: 256 >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 6144K >CPU 0/0 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 0 >CPU0: Thermal monitoring enabled (TM2) >using mwait in idle threads. >ACPI: Core revision 20070126 >ACPI: Checking initramfs for custom DSDT >Parsing all Control Methods: >Table [DSDT](id 0001) - 844 Objects with 94 Devices 185 Methods 31 Regions >Parsing all Control Methods: >Table [SSDT](id 0002) - 15 Objects with 3 Devices 9 Methods 0 Regions >Parsing all Control Methods: >Table [SSDT](id 0003) - 7 Objects with 0 Devices 3 Methods 0 Regions >Parsing all Control Methods: >Table [SSDT](id 0004) - 4 Objects with 0 Devices 3 Methods 0 Regions >Parsing all Control Methods: >Table [SSDT](id 0005) - 13 Objects with 0 Devices 4 Methods 0 Regions > tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired >evxfevnt-0091 [00] enable : Transition to ACPI mode successful >Using local APIC timer interrupts. >APIC timer calibration result 12468858 >Detected 12.468 MHz APIC timer. >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4987.55 BogoMIPS (lpj=9975111) >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 6144K >CPU 1/1 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >CPU1: Thermal monitoring enabled (TM2) >Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 >checking TSC synchronization [CPU#0 -> CPU#1]: passed. >Brought up 2 CPUs >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >net_namespace: 1016 bytes >Booting paravirtualized kernel on bare hardware >NET: Registered protocol family 16 >ACPI: bus type pci registered >PCI: Using MMCONFIG at e0000000 - efffffff >PCI: Using configuration type 1 >evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 >evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 4 Runtime GPEs in this block >ACPI: EC: Look up EC in DSDT >Completing Region/Field/Buffer/Package initialization:........................................................................ >Initialized 30/31 Regions 3/3 Fields 26/27 Buffers 13/22 Packages (892 nodes) >Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored via DMI >. >Executed 1 _INI methods requiring 0 _STA executions (examined 102 objects) >ACPI: Interpreter enabled >ACPI: (supports S0 S3 S4 S5) >ACPI: Using IOAPIC for interrupt routing >ACPI: EC: non-query interrupt received, switching to interrupt mode >ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 >ACPI: EC: driver started in interrupt mode >ACPI: PCI Root Bridge [PCI0] (0000:00) >pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO >pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO >PCI: Transparent bridge - 0000:00:1e.0 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) >ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) >ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) >ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 >ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 >Linux Plug and Play Support v0.97 (c) Adam Belay >pnp: PnP ACPI init >ACPI: bus type pnp registered >pnp: PnP ACPI: found 11 devices >ACPI: ACPI bus type pnp unregistered >PCI: Using ACPI for IRQ routing >PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >PCI-GART: No AMD northbridge found. >hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 >hpet0: 3 64-bit timers, 14318180 Hz >AppArmor: AppArmor Filesystem Enabled >Switched to high resolution mode on CPU 0 >Switched to high resolution mode on CPU 1 >system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved >system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved >system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved >system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved >system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved >system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved >system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved >system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved >system 00:05: iomem range 0xfed00000-0xfed003ff could not be reserved >system 00:07: ioport range 0x680-0x69f has been reserved >system 00:07: ioport range 0x800-0x80f has been reserved >system 00:07: ioport range 0x1000-0x107f has been reserved >system 00:07: ioport range 0x1180-0x11bf has been reserved >system 00:07: ioport range 0x1640-0x164f has been reserved >system 00:07: ioport range 0xfe00-0xfe00 has been reserved >PCI: Bridge: 0000:00:01.0 > IO window: 2000-2fff > MEM window: 0xcfe00000-0xcfefffff > PREFETCH window: 0x00000000d0000000-0x00000000dfffffff >PCI: Bridge: 0000:00:1c.0 > IO window: f000-ffff > MEM window: 0xfb000000-0xfcffffff > PREFETCH window: disabled. >PCI: Bridge: 0000:00:1c.1 > IO window: 3000-3fff > MEM window: 0xf0300000-0xf03fffff > PREFETCH window: 0x0000000088000000-0x00000000880fffff >PCI: Bridge: 0000:00:1c.2 > IO window: disabled. > MEM window: 0xf0200000-0xf02fffff > PREFETCH window: disabled. >PCI: Bridge: 0000:00:1c.3 > IO window: 4000-4fff > MEM window: 0xf0500000-0xf05fffff > PREFETCH window: 0x0000000088100000-0x00000000881fffff >PCI: Bridge: 0000:00:1c.4 > IO window: 5000-5fff > MEM window: 0xf0400000-0xf04fffff > PREFETCH window: disabled. >PCI: Bridge: 0000:00:1c.5 > IO window: 6000-6fff > MEM window: 0xf0600000-0xf06fffff > PREFETCH window: disabled. >PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: 0xf0700000-0xf07fffff > PREFETCH window: disabled. >ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:01.0 to 64 >ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:00:1c.0 to 64 >ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:1c.1 to 64 >ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1c.2 to 64 >ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1c.3 to 64 >ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:00:1c.4 to 64 >ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:1c.5 to 64 >PCI: Setting latency timer of device 0000:00:1e.0 to 64 >NET: Registered protocol family 2 >IP route cache hash table entries: 65536 (order: 7, 524288 bytes) >TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >TCP: Hash tables configured (established 262144 bind 65536) >TCP reno registered >Unpacking initramfs... done >Freeing initrd memory: 5514k freed >Simple Boot Flag at 0x36 set to 0x1 >audit: initializing netlink socket (disabled) >type=2000 audit(1225271931.752:1): initialized >Total HugeTLB memory allocated, 0 >VFS: Disk quotas dquot_6.5.1 >Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered >io scheduler cfq registered (default) >pci 0000:01:00.0: Boot video device >PCI: Setting latency timer of device 0000:00:01.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:01.0:pcie00] >Allocate Port Service[0000:00:01.0:pcie02] >Allocate Port Service[0000:00:01.0:pcie03] >PCI: Setting latency timer of device 0000:00:1c.0 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:1c.0:pcie00] >Allocate Port Service[0000:00:1c.0:pcie02] >Allocate Port Service[0000:00:1c.0:pcie03] >PCI: Setting latency timer of device 0000:00:1c.1 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:1c.1:pcie00] >Allocate Port Service[0000:00:1c.1:pcie02] >Allocate Port Service[0000:00:1c.1:pcie03] >PCI: Setting latency timer of device 0000:00:1c.2 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:1c.2:pcie00] >Allocate Port Service[0000:00:1c.2:pcie02] >Allocate Port Service[0000:00:1c.2:pcie03] >PCI: Setting latency timer of device 0000:00:1c.3 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:1c.3:pcie00] >Allocate Port Service[0000:00:1c.3:pcie02] >Allocate Port Service[0000:00:1c.3:pcie03] >PCI: Setting latency timer of device 0000:00:1c.4 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:1c.4:pcie00] >Allocate Port Service[0000:00:1c.4:pcie02] >Allocate Port Service[0000:00:1c.4:pcie03] >PCI: Setting latency timer of device 0000:00:1c.5 to 64 >assign_interrupt_mode Found MSI capability >Allocate Port Service[0000:00:1c.5:pcie00] >Allocate Port Service[0000:00:1c.5:pcie02] >Allocate Port Service[0000:00:1c.5:pcie03] >vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010980000, using 3750k, total 16384k >vesafb: mode is 800x600x16, linelength=1600, pages=16 >vesafb: scrolling: redraw >vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >bootsplash 3.1.6-2004/03/31: looking for picture... >bootsplash: silentjpeg size 95134 bytes >bootsplash: ...found (800x600, 132866 bytes, v3). >Console: switching to colour frame buffer device 96x33 >fb0: VESA VGA frame buffer device >hpet_resources: 0xfed00000 is busy >Non-volatile memory driver v1.2 >Linux agpgart interface v0.103 >Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled >PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >i8042.c: Detected active multiplexing controller, rev 1.1. >serio: i8042 KBD port at 0x60,0x64 irq 1 >serio: i8042 AUX0 port at 0x60,0x64 irq 12 >serio: i8042 AUX1 port at 0x60,0x64 irq 12 >serio: i8042 AUX2 port at 0x60,0x64 irq 12 >serio: i8042 AUX3 port at 0x60,0x64 irq 12 >mice: PS/2 mouse device common for all mice >input: PC Speaker as /devices/platform/pcspkr/input/input0 >cpuidle: using governor ladder >cpuidle: using governor menu >NET: Registered protocol family 1 >registered taskstats version 1 >input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 >Freeing unused kernel memory: 404k freed >Write protecting the kernel read-only data: 1688k >ACPI: SSDT 7FED33FE, 033E (r1 PmRef Cpu0Ist 3000 INTL 20050624) >Parsing all Control Methods: >Table [SSDT](id 00A7) - 6 Objects with 0 Devices 4 Methods 0 Regions >ACPI: SSDT 7FED2D6D, 060C (r1 PmRef Cpu0Cst 3001 INTL 20050624) >Parsing all Control Methods: >Table [SSDT](id 00A8) - 1 Objects with 0 Devices 1 Methods 0 Regions >Monitor-Mwait will be used to enter C-1 state >Monitor-Mwait will be used to enter C-3 state >ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) >ACPI: ACPI0007:00 is registered as cooling_device0 >ACPI: Processor [CPU0] (supports 8 throttling states) >ACPI: SSDT 7FED373C, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) >Parsing all Control Methods: >Table [SSDT](id 00AF) - 4 Objects with 0 Devices 4 Methods 0 Regions >ACPI: SSDT 7FED3379, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) >Parsing all Control Methods: >Table [SSDT](id 00B0) - 1 Objects with 0 Devices 1 Methods 0 Regions >ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) >ACPI: ACPI0007:01 is registered as cooling_device1 >ACPI: Processor [CPU1] (supportsMarking TSC unstable due to TSC halts in idle > 8 throttling states) >ACPI: LNXTHERM:01 is registered as thermal_zone0 >ACPI: Thermal Zone [THRM] (30 C) >No dock devices found. >SCSI subsystem initialized >libata version 3.00 loaded. >PCI: Enabling device 0000:08:00.1 (0000 -> 0001) >ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:08:00.1 to 64 >scsi0 : pata_jmicron >scsi1 : pata_jmicron >ata1: PATA max UDMA/100 cmd 0x6020 ctl 0x6014 bmdma 0x6000 irq 18 >ata2: PATA max UDMA/100 cmd 0x6018 ctl 0x6010 bmdma 0x6008 irq 18 >Clocksource tsc unstable (delta = -326767966 ns) >ahci 0000:00:1f.2: version 3.0 >ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 >Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a >input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2 >ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode >ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part >PCI: Setting latency timer of device 0000:00:1f.2 to 64 >scsi2 : ahci >scsi3 : ahci >scsi4 : ahci >ata3: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 4344 >ata4: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 4344 >ata5: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804200 irq 4344 >ata3: SATA link down (SStatus 0 SControl 300) >ata4: SATA link down (SStatus 0 SControl 300) >ata5: SATA link down (SStatus 0 SControl 300) >ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 17 >ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode >ahci 0000:08:00.0: flags: 64bit ncq pm led clo pmp pio slum part >PCI: Setting latency timer of device 0000:08:00.0 to 64 >scsi5 : ahci >scsi6 : ahci >ata6: SATA max UDMA/133 abar m8192@0xf0600000 port 0xf0600100 irq 17 >ata7: SATA max UDMA/133 abar m8192@0xf0600000 port 0xf0600180 irq 17 >ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata6.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133 >ata6.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) >ata6.00: configured for UDMA/133 >ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata7.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133 >ata7.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) >ata7.00: configured for UDMA/133 >scsi 5:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5 >scsi 6:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5 >sata_sil24 0000:07:00.0: version 1.1 >ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:07:00.0 to 64 >scsi7 : sata_sil24 >ata8: SATA max UDMA/100 host m128@0xf0402000 port 0xf0400000 irq 16 >ata8: SATA link down (SStatus 0 SControl 0) >ata_piix 0000:00:1f.1: version 2.12 >ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1f.1 to 64 >scsi8 : ata_piix >scsi9 : ata_piix >ata9: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 >ata10: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 >ata9.00: ATAPI: Optiarc DVD RW AD-7540A, 1.42, max UDMA/33 >ata9.00: configured for UDMA/33 >scsi 8:0:0:0: CD-ROM Optiarc DVD RW AD-7540A 1.42 PQ: 0 ANSI: 5 >BIOS EDD facility v0.16 2004-Jun-25, 6 devices found >usbcore: registered new interface driver usbfs >usbcore: registered new interface driver hub >usbcore: registered new device driver usb >USB Universal Host Controller Interface driver v3.0 >ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:1a.0 to 64 >uhci_hcd 0000:00:1a.0: UHCI Host Controller >uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 >uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 >usb usb1: configuration #1 chosen from 1 choice >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 2 ports detected >sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) >sd 5:0:0:0: [sda] Write Protect is off >sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) >sd 5:0:0:0: [sda] Write Protect is off >sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 sda3 <<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 > sda5<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > sda6<6>usb usb1: Product: UHCI Host Controller >usb usb1: Manufacturer: Linux 2.6.25.18-0.2-default uhci_hcd >usb usb1: SerialNumber: 0000:00:1a.0 > sda7<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 > sda8<7>PCI: Setting latency timer of device 0000:00:1a.1 to 64 >uhci_hcd 0000:00:1a.1: UHCI Host Controller > sda9<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 >uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 >usb usb2: configuration #1 chosen from 1 choice >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 2 ports detected > > >sd 5:0:0:0: [sda] Attached SCSI disk >sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) >sd 6:0:0:0: [sdb] Write Protect is off >sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) >sd 6:0:0:0: [sdb] Write Protect is off >sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sdb:<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb2: Product: UHCI Host Controller >usb usb2: Manufacturer: Linux 2.6.25.18-0.2-default uhci_hcd >usb usb2: SerialNumber: 0000:00:1a.1 >ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >uhci_hcd 0000:00:1d.0: UHCI Host Controller > sdb1 sdb2 <<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 >uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 > sdb5<6>usb usb3: configuration #1 chosen from 1 choice >hub 3-0:1.0: USB hub found > sdb6 > sdb3 >hub 3-0:1.0: 2 ports detected >sd 6:0:0:0: [sdb] Attached SCSI disk >usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb3: Product: UHCI Host Controller >usb usb3: Manufacturer: Linux 2.6.25.18-0.2-default uhci_hcd >usb usb3: SerialNumber: 0000:00:1d.0 >ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >uhci_hcd 0000:00:1d.1: UHCI Host Controller >uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 >uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 >usb usb4: configuration #1 chosen from 1 choice >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 2 ports detected >usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb4: Product: UHCI Host Controller >usb usb4: Manufacturer: Linux 2.6.25.18-0.2-default uhci_hcd >usb usb4: SerialNumber: 0000:00:1d.1 >ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >uhci_hcd 0000:00:1d.2: UHCI Host Controller >uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 >uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 >usb usb5: configuration #1 chosen from 1 choice >hub 5-0:1.0: USB hub found >hub 5-0:1.0: 2 ports detected >usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 >usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb5: Product: UHCI Host Controller >usb usb5: Manufacturer: Linux 2.6.25.18-0.2-default uhci_hcd >usb usb5: SerialNumber: 0000:00:1d.2 >ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1a.7 to 64 >ehci_hcd 0000:00:1a.7: EHCI Host Controller >ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 >ehci_hcd 0000:00:1a.7: debug port 1 >PCI: cache line size of 32 is not supported by device 0000:00:1a.7 >ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0804800 >ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >usb usb6: configuration #1 chosen from 1 choice >hub 6-0:1.0: USB hub found >hub 6-0:1.0: 4 ports detected >usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 >usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb6: Product: EHCI Host Controller >usb usb6: Manufacturer: Linux 2.6.25.18-0.2-default ehci_hcd >usb usb6: SerialNumber: 0000:00:1a.7 >ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >ehci_hcd 0000:00:1d.7: EHCI Host Controller >ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 >ehci_hcd 0000:00:1d.7: debug port 1 >PCI: cache line size of 32 is not supported by device 0000:00:1d.7 >ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00 >ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >usb usb7: configuration #1 chosen from 1 choice >hub 7-0:1.0: USB hub found >hub 7-0:1.0: 6 ports detected >usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 >usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >usb usb7: Product: EHCI Host Controller >usb usb7: Manufacturer: Linux 2.6.25.18-0.2-default ehci_hcd >usb usb7: SerialNumber: 0000:00:1d.7 >hub 6-0:1.0: unable to enumerate USB device on port 1 >PM: Starting manual resume from disk >REISERFS (device sdb5): found reiserfs format "3.6" with standard journal >REISERFS (device sdb5): using ordered data mode >REISERFS (device sdb5): journal params: device sdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >REISERFS (device sdb5): checking transaction log (sdb5) >REISERFS (device sdb5): Using r5 hash to sort names >usb 1-1: new full speed USB device using uhci_hcd and address 2 >usb 1-1: configuration #1 chosen from 1 choice >usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 >usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >sd 5:0:0:0: Attached scsi generic sg0 type 0 >sd 6:0:0:0: Attached scsi generic sg1 type 0 >scsi 8:0:0:0: Attached scsi generic sg2 type 5 >ACPI: AC Adapter [AC0] (on-line) >ACPI: Battery Slot [BAT0] (battery present) >input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 >ACPI: Power Button (FF) [PWRF] >input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 >ACPI: Lid Switch [LID0] >input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 >iTCO_vendor_support: vendor-support=0 >r8169 Gigabit Ethernet driver 2.2LK loaded >ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:06:00.0 to 64 >eth0: RTL8168b/8111b at 0xffffc2000035e000, 00:03:0d:8c:32:de, XID 38000000 IRQ 4343 >ACPI: Power Button (CM) [PWRB] >input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6 >iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) >iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) >ACPI: Sleep Button (CM) [SLPB] >iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) >Bluetooth: Core ver 2.11 >NET: Registered protocol family 31 >Bluetooth: HCI device and connection manager initialized >Bluetooth: HCI socket layer initialized >ACPI: device:05 is registered as cooling_device2 >ACPI Error (utglobal-0127): Unknown exception code: 0xFFFFFFFE [20070126] >Pid: 892, comm: modprobe Tainted: G N 2.6.25.18-0.2-default #1 > >Call Trace: > [<ffffffff8020d696>] dump_trace+0xc4/0x576 > [<ffffffff8020db88>] show_trace+0x40/0x57 > [<ffffffff80447249>] dump_stack+0x72/0x7b > [<ffffffff8036df20>] acpi_format_exception+0x34/0x40 > [<ffffffff8036c51b>] acpi_ut_exception+0x2d/0xa0 > [<ffffffff8826d63f>] :video:acpi_video_bus_add+0xf0a/0xf0f > [<ffffffff80370ac9>] acpi_device_probe+0x56/0x108 > [<ffffffff803a011e>] driver_probe_device+0xc0/0x16e > [<ffffffff803a023c>] __driver_attach+0x70/0xae > [<ffffffff8039f971>] bus_for_each_dev+0x4f/0x89 > [<ffffffff8039ff69>] driver_attach+0x1c/0x1e > [<ffffffff8039f21b>] bus_add_driver+0xb7/0x200 > [<ffffffff803a03ef>] driver_register+0x5e/0xde > [<ffffffff80370eb7>] acpi_bus_register_driver+0x3e/0x40 > [<ffffffff8815303c>] :video:acpi_video_init+0x3c/0x5e > [<ffffffff8025aaac>] sys_init_module+0x1b0a/0x1c47 > [<ffffffff8020bffa>] system_call_after_swapgs+0x8a/0x8f > [<00007fb6ef92673a>] > >ACPI Exception (video-1731): UNKNOWN_STATUS_CODE, Cant attach device [20070126] >input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input7 >ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) >sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray >Uniform CD-ROM driver Revision: 3.20 >sr 8:0:0:0: Attached scsi CD-ROM sr0 >ACPI: WMI: Mapper loaded >Bluetooth: Generic Bluetooth USB driver ver 0.1 >usbcore: registered new interface driver btusb >ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19 >ACPI: I/O resource 0000:00:1f.3 [0x1c00-0x1c1f] conflicts with ACPI region SMBI [0x1c00-0x1c0f] >ACPI: Device needs an ACPI driver >Bluetooth: HCI USB driver ver 2.9 >usbcore: registered new interface driver hci_usb >PCI: Enabling device 0000:09:04.0 (0195 -> 0197) >ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20 >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f0701000-f07017ff] Max Packet=[2048] IR/IT contexts=[8/8] >rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 >rtc0: alarms up to one month, y3k >ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:1b.0 to 64 >iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks >iwl4965: Copyright(c) 2003-2007 Intel Corporation >hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... >ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) >ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) >ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x14/0x0/0x0/0x0/0x0) >ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 >ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0 >ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:05:00.0 to 64 >iwl4965: Detected Intel Wireless WiFi Link 4965AGN >iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels >phy0: Selected rate control algorithm 'iwl-4965-rs' >ACPI: PCI interrupt for device 0000:05:00.0 disabled >ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:01:00.1 to 64 >Bluetooth: L2CAP ver 2.9 >Bluetooth: L2CAP socket layer initialized >Bluetooth: RFCOMM socket layer initialized >Bluetooth: RFCOMM TTY layer initialized >Bluetooth: RFCOMM ver 1.8 >Adding 4192924k swap on /dev/sda7. Priority:-1 extents:1 across:4192924k >ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d0055011de7] >device-mapper: uevent: version 1.0.3 >device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com >loop: module loaded >SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled >SGI XFS Quota Management subsystem >XFS mounting filesystem sda8 >Ending clean XFS mount for filesystem: sda8 >fuse init (API version 7.9) >ISO 9660 Extensions: Microsoft Joliet Level 3 >ISO 9660 Extensions: RRIP_1991A >type=1505 audit(1225268354.185:2): operation="profile_load" name="/bin/ping" name2="default" pid=1907 >type=1505 audit(1225268354.197:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1944 >type=1505 audit(1225268354.213:4): operation="profile_load" name="/sbin/portmap" name2="default" pid=1945 >type=1505 audit(1225268354.229:5): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1946 >type=1505 audit(1225268354.294:6): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1949 >type=1505 audit(1225268354.386:7): operation="profile_load" name="/usr/X11R6/bin/acroread" name2="default" pid=1950 >type=1505 audit(1225268354.418:8): operation="profile_load" name="/usr/bin/skype" name2="default" pid=1954 >type=1505 audit(1225268354.514:9): operation="profile_load" name="/usr/lib/RealPlayer10/realplay" name2="default" pid=1967 >type=1505 audit(1225268354.654:10): operation="profile_load" name="/usr/lib/firefox/firefox-bin" name2="default" pid=1987 >type=1505 audit(1225268354.670:11): operation="profile_load" name="/usr/lib/firefox/firefox.sh" name2="default" pid=2011 >IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk> >NET: Registered protocol family 10 >lo: Disabled Privacy Extensions >ip6_tables: (C) 2000-2006 Netfilter Core Team >ip_tables: (C) 2000-2006 Netfilter Core Team >nf_conntrack version 0.5.0 (16384 buckets, 65536 max) >Bluetooth: BNEP (Ethernet Emulation) ver 1.2 >Bluetooth: BNEP filters: protocol multicast >Bridge firewalling registered >pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. >r8169: eth0: link up >r8169: eth0: link up >NET: Registered protocol family 17 >ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 >PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 40100102, writing 40100106) >ADDRCONF(NETDEV_UP): wlan0: link is not ready >eth0: no IPv6 routers present >printk: 24 messages suppressed. >type=1503 audit(1225268380.302:20): operation="inode_create" requested_mask="a::" denied_mask="a::" fsuid=0 name="/var/run/portmap_mapping" pid=3354 profile="/sbin/portmap" >VMware memory control driver initialized >vmmemctl: started kernel thread pid=3875 >bootsplash: status on console 0 changed to on >ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >parse-metadata[4036]: segfault at fffffffa007648d8 ip 412f56 sp 7fffdbecf9a0 error 4 in parse-metadata[400000+2f000] >NET: Registered protocol family 4 >NET: Registered protocol family 3 >NET: Registered protocol family 5 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >PM: Syncing filesystems ... done. >Freezing user space processes ... (elapsed 0.00 seconds) done. >Freezing remaining freezable tasks ... (elapsed 0.65 seconds) done. >Suspending console(s) >btusb 1-1:1.0: no suspend for driver btusb? >btusb_intr_complete: hci0 urb ffff81007e1f8cc0 failed to resubmit (1) >sd 6:0:0:0: [sdb] Synchronizing SCSI cache >sd 6:0:0:0: [sdb] Stopping disk >sd 5:0:0:0: [sda] Synchronizing SCSI cache >sd 5:0:0:0: [sda] Stopping disk >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:08:00.1 disabled >ACPI: PCI interrupt for device 0000:08:00.0 disabled >ACPI: PCI interrupt for device 0000:07:00.0 disabled >ACPI: PCI interrupt for device 0000:05:00.0 disabled >ACPI: PCI interrupt for device 0000:01:00.1 disabled >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:00:1f.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.7 disabled >ACPI: PCI interrupt for device 0000:00:1d.2 disabled >ACPI: PCI interrupt for device 0000:00:1d.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.0 disabled >ACPI: PCI interrupt for device 0000:00:1b.0 disabled >ACPI: PCI interrupt for device 0000:00:1a.7 disabled >ACPI: PCI interrupt for device 0000:00:1a.1 disabled >ACPI: PCI interrupt for device 0000:00:1a.0 disabled >ACPI: Preparing to enter system sleep state S3 >Disabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU 1 is now offline >SMP alternatives: switching to UP code >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000001 > groups: 00000000,00000000,00000000,00000001 >CPU1 is down >Extended CMOS year: 2000 > hwsleep-0326 [00] enter_sleep_state : Entering sleep state [S3] >Back to C! >Extended CMOS year: 2000 >Enabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >SMP alternatives: switching to SMP code >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4987.52 BogoMIPS (lpj=9975042) >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 6144K >CPU 1/1 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 is up >Switched to high resolution mode on CPU 1 >PM: Writing back config space on device 0000:00:01.0 at offset f (was 120105, writing 1a0105) >PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100) >PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010) >PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:01.0 to 64 >ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:1a.0 to 64 >usb usb1: root hub lost power or was reset >sata_sil24: IRQ status == 0xffffffff, PCI fault or device removal? >ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 >PCI: Setting latency timer of device 0000:00:1a.1 to 64 >usb usb2: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1a.7 to 64 >PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) >ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:1b.0 to 64 >PM: Writing back config space on device 0000:00:1c.0 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 2000f0f0, writing f0f0) >PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:1c.0 to 64 >PM: Writing back config space on device 0000:00:1c.1 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 88018801) >PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing f030f030) >PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 3030) >PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.1 to 64 >PM: Writing back config space on device 0000:00:1c.2 at offset f (was 40300, writing 40307) >PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing f020f020) >PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 600000f0) >PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.2 to 64 >PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040a) >PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing 88118811) >PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing f050f050) >PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 4040) >PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.3 to 64 >PM: Writing back config space on device 0000:00:1c.4 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.4 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.4 at offset 8 (was 0, writing f040f040) >PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 20000000, writing 5050) >PM: Writing back config space on device 0000:00:1c.4 at offset 6 (was 0, writing 70700) >PM: Writing back config space on device 0000:00:1c.4 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.4 to 64 >PM: Writing back config space on device 0000:00:1c.5 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.5 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.5 at offset 8 (was 0, writing f060f060) >PM: Writing back config space on device 0000:00:1c.5 at offset 7 (was 20000000, writing 20006060) >PM: Writing back config space on device 0000:00:1c.5 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.5 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.5 to 64 >ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >usb usb3: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >usb usb4: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >usb usb5: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing f070f070) >PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was a2800000, writing a28000f0) >PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100107) >PCI: Setting latency timer of device 0000:00:1e.0 to 64 >PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107) >PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 1ff) >PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) >ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1f.1 to 64 >PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20a) >PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) >PCI: Setting latency timer of device 0000:00:1f.2 to 64 >ata9.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out >ata9.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out >PM: Writing back config space on device 0000:00:1f.3 at offset 4 (was 0, writing 88200000) >PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 105) >PM: Writing back config space on device 0000:01:00.0 at offset 8 (was 1, writing 2001) >PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 4, writing cfef0004) >PM: Writing back config space on device 0000:01:00.0 at offset 4 (was c, writing d000000c) >PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100000, writing 100007) >ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PM: Writing back config space on device 0000:01:00.1 at offset f (was 2ff, writing 20a) >PM: Writing back config space on device 0000:01:00.1 at offset 4 (was 4, writing cfeec004) >PM: Writing back config space on device 0000:01:00.1 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.1 at offset 1 (was 100000, writing 100003) >ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:01:00.1 to 64 >PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:04:00.0 at offset c (was 1, writing 0) >PM: Writing back config space on device 0000:04:00.0 at offset 6 (was 1, writing 3001) >PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing f0300000) >PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100107) >ata4: SATA link down (SStatus 0 SControl 300) >ata5: SATA link down (SStatus 0 SControl 300) >ata3: SATA link down (SStatus 0 SControl 300) >PCI: Enabling device 0000:05:00.0 (0000 -> 0002) >ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 >PM: Writing back config space on device 0000:05:00.0 at offset f (was 100, writing 107) >PM: Writing back config space on device 0000:05:00.0 at offset 4 (was 4, writing f0200004) >PM: Writing back config space on device 0000:05:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100106) >PM: Writing back config space on device 0000:06:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:06:00.0 at offset 6 (was 4, writing f0500004) >PM: Writing back config space on device 0000:06:00.0 at offset 4 (was 1, writing 4001) >PM: Writing back config space on device 0000:06:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100000, writing 40100507) >ata9.00: configured for UDMA/33 >r8169: eth0: link up >PM: Writing back config space on device 0000:07:00.0 at offset f (was 100, writing 105) >PM: Writing back config space on device 0000:07:00.0 at offset 8 (was 1, writing 5001) >PM: Writing back config space on device 0000:07:00.0 at offset 6 (was 4, writing f0400004) >PM: Writing back config space on device 0000:07:00.0 at offset 4 (was 4, writing f0402004) >PM: Writing back config space on device 0000:07:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:07:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:07:00.0 to 64 >PM: Writing back config space on device 0000:08:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:08:00.0 at offset 9 (was 0, writing f0600000) >PM: Writing back config space on device 0000:08:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:08:00.0 to 64 >ata8: SATA link down (SStatus 0 SControl 0) >PM: Writing back config space on device 0000:08:00.1 at offset 8 (was 1, writing 6001) >PM: Writing back config space on device 0000:08:00.1 at offset 7 (was 1, writing 6011) >PM: Writing back config space on device 0000:08:00.1 at offset 6 (was 1, writing 6019) >PM: Writing back config space on device 0000:08:00.1 at offset 5 (was 1, writing 6015) >PM: Writing back config space on device 0000:08:00.1 at offset 4 (was 1, writing 6021) >PM: Writing back config space on device 0000:08:00.1 at offset 1 (was 100000, writing 100005) >ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:08:00.1 to 64 >PM: Writing back config space on device 0000:09:04.0 at offset f (was 100, writing 10b) >PM: Writing back config space on device 0000:09:04.0 at offset 5 (was 0, writing f0700000) >PM: Writing back config space on device 0000:09:04.0 at offset 4 (was f83ff000, writing f0701000) >PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 800000, writing 802010) >PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2100080, writing 2180197) >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f0701000-f07017ff] Max Packet=[2048] IR/IT contexts=[8/8] >ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >sd 5:0:0:0: [sda] Starting disk >ata6.00: configured for UDMA/133 >ata7.00: configured for UDMA/133 >sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) >sd 5:0:0:0: [sda] Write Protect is off >sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) >sd 6:0:0:0: [sdb] Write Protect is off >sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 6:0:0:0: [sdb] Starting disk >Restarting tasks ... <6>usb 1-1: USB disconnect, address 2 >btusb_send_frame: hci0 urb ffff81007e1f8cc0 submission failed >done. >usb 1-1: new full speed USB device using uhci_hcd and address 3 >usb 1-1: configuration #1 chosen from 1 choice >usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 >usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. >psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 5 bytes away. >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33581 DF PROTO=TCP SPT=11610 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A000035A6445355E0) >SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:03:0d:8c:32:de:00:19:cb:3a:96:b0:08:00 SRC=74.125.39.166 DST=10.0.0.129 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=55092 PROTO=TCP SPT=80 DPT=11610 WINDOW=0 RES=0x00 RST URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33582 DF PROTO=TCP SPT=11610 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A000035ED445355E0) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33583 DF PROTO=TCP SPT=11610 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A000052F2445355E0) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33584 DF PROTO=TCP SPT=11610 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A00006A30445355E0) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33585 DF PROTO=TCP SPT=11610 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A00006C38445355E0) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33586 DF PROTO=TCP SPT=11610 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A00007048445355E0) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33587 DF PROTO=TCP SPT=11610 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A00007868445355E0) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33588 DF PROTO=TCP SPT=11610 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A000088A8445355E0) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=33589 DF PROTO=TCP SPT=11610 DPT=80 WINDOW=90 RES=0x00 ACK FIN URGP=0 OPT (0101080A0000A928445355E0) >CE: hpet increasing min_delta_ns to 15000 nsec >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >CE: hpet increasing min_delta_ns to 22500 nsec >PM: Syncing filesystems ... done. >Freezing user space processes ... (elapsed 0.00 seconds) done. >Freezing remaining freezable tasks ... (elapsed 0.33 seconds) done. >Suspending console(s) >btusb 1-1:1.0: no suspend for driver btusb? >btusb_intr_complete: hci0 urb ffff81007e82bcc0 failed to resubmit (1) >sd 6:0:0:0: [sdb] Synchronizing SCSI cache >sd 6:0:0:0: [sdb] Stopping disk >sd 5:0:0:0: [sda] Synchronizing SCSI cache >sd 5:0:0:0: [sda] Stopping disk >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:08:00.1 disabled >ACPI: PCI interrupt for device 0000:08:00.0 disabled >ACPI: PCI interrupt for device 0000:07:00.0 disabled >ACPI: PCI interrupt for device 0000:05:00.0 disabled >ACPI: PCI interrupt for device 0000:01:00.1 disabled >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:00:1f.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.7 disabled >ACPI: PCI interrupt for device 0000:00:1d.2 disabled >ACPI: PCI interrupt for device 0000:00:1d.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.0 disabled >ACPI: PCI interrupt for device 0000:00:1b.0 disabled >ACPI: PCI interrupt for device 0000:00:1a.7 disabled >ACPI: PCI interrupt for device 0000:00:1a.1 disabled >ACPI: PCI interrupt for device 0000:00:1a.0 disabled >ACPI: Preparing to enter system sleep state S3 >Disabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU 1 is now offline >SMP alternatives: switching to UP code >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000001 > groups: 00000000,00000000,00000000,00000001 >CPU1 is down >Extended CMOS year: 2000 > hwsleep-0326 [00] enter_sleep_state : Entering sleep state [S3] >Back to C! >Extended CMOS year: 2000 >Enabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >SMP alternatives: switching to SMP code >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4987.58 BogoMIPS (lpj=9975174) >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 6144K >CPU 1/1 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 is up >Switched to high resolution mode on CPU 1 >PM: Writing back config space on device 0000:00:01.0 at offset f (was 120105, writing 1a0105) >PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2020, writing 20002020) >PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100) >PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010) >PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:01.0 to 64 >ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:1a.0 to 64 >usb usb1: root hub lost power or was reset >sata_sil24: IRQ status == 0xffffffff, PCI fault or device removal? >ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 >PCI: Setting latency timer of device 0000:00:1a.1 to 64 >usb usb2: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1a.7 to 64 >PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) >ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:1b.0 to 64 >PM: Writing back config space on device 0000:00:1c.0 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:1c.0 to 64 >PM: Writing back config space on device 0000:00:1c.1 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 88018801) >PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing f030f030) >PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 20003030) >PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.1 to 64 >PM: Writing back config space on device 0000:00:1c.2 at offset f (was 40300, writing 40307) >PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing f020f020) >PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing f0) >PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.2 to 64 >PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040a) >PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing 88118811) >PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing f050f050) >PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20004040) >PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.3 to 64 >PM: Writing back config space on device 0000:00:1c.4 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.4 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.4 at offset 8 (was 0, writing f040f040) >PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 20000000, writing 20005050) >PM: Writing back config space on device 0000:00:1c.4 at offset 6 (was 0, writing 70700) >PM: Writing back config space on device 0000:00:1c.4 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.4 to 64 >PM: Writing back config space on device 0000:00:1c.5 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.5 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.5 at offset 8 (was 0, writing f060f060) >PM: Writing back config space on device 0000:00:1c.5 at offset 7 (was 20000000, writing 6060) >PM: Writing back config space on device 0000:00:1c.5 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.5 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.5 to 64 >ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >usb usb3: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >usb usb4: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >usb usb5: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing f070f070) >PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was a2800000, writing a28000f0) >PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100107) >PCI: Setting latency timer of device 0000:00:1e.0 to 64 >PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107) >PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 1ff) >PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) >ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1f.1 to 64 >PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20a) >PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) >PCI: Setting latency timer of device 0000:00:1f.2 to 64 >ata9.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out >ata9.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out >ata9.00: configured for UDMA/33 >PM: Writing back config space on device 0000:00:1f.3 at offset 4 (was 0, writing 88200000) >PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 105) >PM: Writing back config space on device 0000:01:00.0 at offset 8 (was 1, writing 2001) >PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 4, writing cfef0004) >PM: Writing back config space on device 0000:01:00.0 at offset 4 (was c, writing d000000c) >PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100000, writing 100007) >ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PM: Writing back config space on device 0000:01:00.1 at offset f (was 2ff, writing 20a) >PM: Writing back config space on device 0000:01:00.1 at offset 4 (was 4, writing cfeec004) >PM: Writing back config space on device 0000:01:00.1 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.1 at offset 1 (was 100000, writing 100003) >ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:01:00.1 to 64 >PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:04:00.0 at offset c (was 1, writing 0) >PM: Writing back config space on device 0000:04:00.0 at offset 6 (was 1, writing 3001) >PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing f0300000) >PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100107) >PCI: Enabling device 0000:05:00.0 (0000 -> 0002) >ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 >PM: Writing back config space on device 0000:05:00.0 at offset f (was 100, writing 107) >PM: Writing back config space on device 0000:05:00.0 at offset 4 (was 4, writing f0200004) >PM: Writing back config space on device 0000:05:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100106) >PM: Writing back config space on device 0000:06:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:06:00.0 at offset 6 (was 4, writing f0500004) >PM: Writing back config space on device 0000:06:00.0 at offset 4 (was 1, writing 4001) >PM: Writing back config space on device 0000:06:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100000, writing 100507) >r8169: eth0: link up >PM: Writing back config space on device 0000:07:00.0 at offset f (was 100, writing 105) >PM: Writing back config space on device 0000:07:00.0 at offset 8 (was 1, writing 5001) >PM: Writing back config space on device 0000:07:00.0 at offset 6 (was 4, writing f0400004) >PM: Writing back config space on device 0000:07:00.0 at offset 4 (was 4, writing f0402004) >PM: Writing back config space on device 0000:07:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:07:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:07:00.0 to 64 >PM: Writing back config space on device 0000:08:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:08:00.0 at offset 9 (was 0, writing f0600000) >PM: Writing back config space on device 0000:08:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:08:00.0 to 64 >ata3: SATA link down (SStatus 0 SControl 300) >ata4: SATA link down (SStatus 0 SControl 300) >ata5: SATA link down (SStatus 0 SControl 300) >PM: Writing back config space on device 0000:08:00.1 at offset 8 (was 1, writing 6001) >PM: Writing back config space on device 0000:08:00.1 at offset 7 (was 1, writing 6011) >PM: Writing back config space on device 0000:08:00.1 at offset 6 (was 1, writing 6019) >PM: Writing back config space on device 0000:08:00.1 at offset 5 (was 1, writing 6015) >PM: Writing back config space on device 0000:08:00.1 at offset 4 (was 1, writing 6021) >PM: Writing back config space on device 0000:08:00.1 at offset 1 (was 100000, writing 100005) >ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:08:00.1 to 64 >PM: Writing back config space on device 0000:09:04.0 at offset f (was 100, writing 10b) >PM: Writing back config space on device 0000:09:04.0 at offset 5 (was 0, writing f0700000) >PM: Writing back config space on device 0000:09:04.0 at offset 4 (was f83ff000, writing f0701000) >PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 800000, writing 802010) >PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2100080, writing 2180197) >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f0701000-f07017ff] Max Packet=[2048] IR/IT contexts=[8/8] >ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata7.00: configured for UDMA/133 >ata6.00: configured for UDMA/133 >sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) >sd 6:0:0:0: [sdb] Write Protect is off >sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) >sd 5:0:0:0: [sda] Write Protect is off >sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 5:0:0:0: [sda] Starting disk >sd 6:0:0:0: [sdb] Starting disk >ata8: SATA link down (SStatus 0 SControl 0) >Restarting tasks ... <6>usb 1-1: USB disconnect, address 3 >btusb_send_frame: hci0 urb ffff81007fb568c0 submission failed >done. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >usb 1-1: new full speed USB device using uhci_hcd and address 4 >usb 1-1: configuration #1 chosen from 1 choice >usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 >usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >PM: Syncing filesystems ... done. >Freezing user space processes ... (elapsed 0.00 seconds) done. >Freezing remaining freezable tasks ... (elapsed 0.79 seconds) done. >Suspending console(s) >btusb 1-1:1.0: no suspend for driver btusb? >btusb_intr_complete: hci0 urb ffff810037846b80 failed to resubmit (1) >sd 6:0:0:0: [sdb] Synchronizing SCSI cache >sd 6:0:0:0: [sdb] Stopping disk >sd 5:0:0:0: [sda] Synchronizing SCSI cache >sd 5:0:0:0: [sda] Stopping disk >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:08:00.1 disabled >ACPI: PCI interrupt for device 0000:08:00.0 disabled >ACPI: PCI interrupt for device 0000:07:00.0 disabled >ACPI: PCI interrupt for device 0000:05:00.0 disabled >ACPI: PCI interrupt for device 0000:01:00.1 disabled >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:00:1f.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.7 disabled >ACPI: PCI interrupt for device 0000:00:1d.2 disabled >ACPI: PCI interrupt for device 0000:00:1d.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.0 disabled >ACPI: PCI interrupt for device 0000:00:1b.0 disabled >ACPI: PCI interrupt for device 0000:00:1a.7 disabled >ACPI: PCI interrupt for device 0000:00:1a.1 disabled >ACPI: PCI interrupt for device 0000:00:1a.0 disabled >ACPI: Preparing to enter system sleep state S3 >Disabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU 1 is now offline >SMP alternatives: switching to UP code >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000001 > groups: 00000000,00000000,00000000,00000001 >CPU1 is down >Extended CMOS year: 2000 > hwsleep-0326 [00] enter_sleep_state : Entering sleep state [S3] >Back to C! >Extended CMOS year: 2000 >Enabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >SMP alternatives: switching to SMP code >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4987.57 BogoMIPS (lpj=9975154) >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 6144K >CPU 1/1 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 is up >Switched to high resolution mode on CPU 1 >PM: Writing back config space on device 0000:00:01.0 at offset f (was 120105, writing 1a0105) >PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2020, writing 20002020) >PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100) >PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010) >PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:01.0 to 64 >ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:1a.0 to 64 >usb usb1: root hub lost power or was reset >sata_sil24: IRQ status == 0xffffffff, PCI fault or device removal? >ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 >PCI: Setting latency timer of device 0000:00:1a.1 to 64 >usb usb2: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1a.7 to 64 >PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) >ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:1b.0 to 64 >PM: Writing back config space on device 0000:00:1c.0 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:1c.0 to 64 >PM: Writing back config space on device 0000:00:1c.1 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 88018801) >PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing f030f030) >PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 3030) >PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.1 to 64 >PM: Writing back config space on device 0000:00:1c.2 at offset f (was 40300, writing 40307) >PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing f020f020) >PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 200000f0) >PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.2 to 64 >PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040a) >PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing 88118811) >PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing f050f050) >PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 4040) >PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.3 to 64 >PM: Writing back config space on device 0000:00:1c.4 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.4 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.4 at offset 8 (was 0, writing f040f040) >PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 20000000, writing 5050) >PM: Writing back config space on device 0000:00:1c.4 at offset 6 (was 0, writing 70700) >PM: Writing back config space on device 0000:00:1c.4 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.4 to 64 >PM: Writing back config space on device 0000:00:1c.5 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.5 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.5 at offset 8 (was 0, writing f060f060) >PM: Writing back config space on device 0000:00:1c.5 at offset 7 (was 20000000, writing 20006060) >PM: Writing back config space on device 0000:00:1c.5 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.5 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.5 to 64 >ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >usb usb3: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >usb usb4: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >usb usb5: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing f070f070) >PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was a2800000, writing a28000f0) >PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100107) >PCI: Setting latency timer of device 0000:00:1e.0 to 64 >PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107) >PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 1ff) >PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) >ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1f.1 to 64 >PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20a) >PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) >PCI: Setting latency timer of device 0000:00:1f.2 to 64 >ata9.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out >ata9.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out >ata9.00: configured for UDMA/33 >PM: Writing back config space on device 0000:00:1f.3 at offset 4 (was 0, writing 88200000) >PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 105) >PM: Writing back config space on device 0000:01:00.0 at offset 8 (was 1, writing 2001) >PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 4, writing cfef0004) >PM: Writing back config space on device 0000:01:00.0 at offset 4 (was c, writing d000000c) >PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100000, writing 100007) >ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PM: Writing back config space on device 0000:01:00.1 at offset f (was 2ff, writing 20a) >PM: Writing back config space on device 0000:01:00.1 at offset 4 (was 4, writing cfeec004) >PM: Writing back config space on device 0000:01:00.1 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.1 at offset 1 (was 100000, writing 100003) >ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:01:00.1 to 64 >PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:04:00.0 at offset c (was 1, writing 0) >PM: Writing back config space on device 0000:04:00.0 at offset 6 (was 1, writing 3001) >PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing f0300000) >PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100107) >PCI: Enabling device 0000:05:00.0 (0000 -> 0002) >ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 >PM: Writing back config space on device 0000:05:00.0 at offset f (was 100, writing 107) >PM: Writing back config space on device 0000:05:00.0 at offset 4 (was 4, writing f0200004) >PM: Writing back config space on device 0000:05:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100106) >PM: Writing back config space on device 0000:06:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:06:00.0 at offset 6 (was 4, writing f0500004) >PM: Writing back config space on device 0000:06:00.0 at offset 4 (was 1, writing 4001) >PM: Writing back config space on device 0000:06:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100000, writing 100507) >r8169: eth0: link up >PM: Writing back config space on device 0000:07:00.0 at offset f (was 100, writing 105) >PM: Writing back config space on device 0000:07:00.0 at offset 8 (was 1, writing 5001) >PM: Writing back config space on device 0000:07:00.0 at offset 6 (was 4, writing f0400004) >PM: Writing back config space on device 0000:07:00.0 at offset 4 (was 4, writing f0402004) >PM: Writing back config space on device 0000:07:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:07:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:07:00.0 to 64 >PM: Writing back config space on device 0000:08:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:08:00.0 at offset 9 (was 0, writing f0600000) >PM: Writing back config space on device 0000:08:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:08:00.0 to 64 >ata3: SATA link down (SStatus 0 SControl 300) >ata4: SATA link down (SStatus 0 SControl 300) >ata5: SATA link down (SStatus 0 SControl 300) >PM: Writing back config space on device 0000:08:00.1 at offset 8 (was 1, writing 6001) >PM: Writing back config space on device 0000:08:00.1 at offset 7 (was 1, writing 6011) >PM: Writing back config space on device 0000:08:00.1 at offset 6 (was 1, writing 6019) >PM: Writing back config space on device 0000:08:00.1 at offset 5 (was 1, writing 6015) >PM: Writing back config space on device 0000:08:00.1 at offset 4 (was 1, writing 6021) >PM: Writing back config space on device 0000:08:00.1 at offset 1 (was 100000, writing 100005) >ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:08:00.1 to 64 >PM: Writing back config space on device 0000:09:04.0 at offset f (was 100, writing 10b) >PM: Writing back config space on device 0000:09:04.0 at offset 5 (was 0, writing f0700000) >PM: Writing back config space on device 0000:09:04.0 at offset 4 (was f83ff000, writing f0701000) >PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 800000, writing 802010) >PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2100080, writing 2180197) >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f0701000-f07017ff] Max Packet=[2048] IR/IT contexts=[8/8] >ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata6.00: configured for UDMA/133 >ata7.00: configured for UDMA/133 >sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) >sd 5:0:0:0: [sda] Write Protect is off >sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 5:0:0:0: [sda] Starting disk >sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) >sd 6:0:0:0: [sdb] Write Protect is off >sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 6:0:0:0: [sdb] Starting disk >ata8: SATA link down (SStatus 0 SControl 0) >Restarting tasks ... <6>usb 1-1: USB disconnect, address 4 >btusb_send_frame: hci0 urb ffff81006199eac0 submission failed >done. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >usb 1-1: new full speed USB device using uhci_hcd and address 5 >usb 1-1: configuration #1 chosen from 1 choice >usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 >usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >PM: Syncing filesystems ... done. >Freezing user space processes ... (elapsed 0.00 seconds) done. >Freezing remaining freezable tasks ... (elapsed 0.91 seconds) done. >Suspending console(s) >btusb 1-1:1.0: no suspend for driver btusb? >btusb_intr_complete: hci0 urb ffff81007e1f8cc0 failed to resubmit (1) >sd 6:0:0:0: [sdb] Synchronizing SCSI cache >sd 6:0:0:0: [sdb] Stopping disk >sd 5:0:0:0: [sda] Synchronizing SCSI cache >sd 5:0:0:0: [sda] Stopping disk >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:08:00.1 disabled >ACPI: PCI interrupt for device 0000:08:00.0 disabled >ACPI: PCI interrupt for device 0000:07:00.0 disabled >ACPI: PCI interrupt for device 0000:05:00.0 disabled >ACPI: PCI interrupt for device 0000:01:00.1 disabled >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:00:1f.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.7 disabled >ACPI: PCI interrupt for device 0000:00:1d.2 disabled >ACPI: PCI interrupt for device 0000:00:1d.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.0 disabled >ACPI: PCI interrupt for device 0000:00:1b.0 disabled >ACPI: PCI interrupt for device 0000:00:1a.7 disabled >ACPI: PCI interrupt for device 0000:00:1a.1 disabled >ACPI: PCI interrupt for device 0000:00:1a.0 disabled >ACPI: Preparing to enter system sleep state S3 >Disabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU 1 is now offline >SMP alternatives: switching to UP code >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000001 > groups: 00000000,00000000,00000000,00000001 >CPU1 is down >Extended CMOS year: 2000 > hwsleep-0326 [00] enter_sleep_state : Entering sleep state [S3] >Back to C! >Extended CMOS year: 2000 >Enabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >SMP alternatives: switching to SMP code >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4987.63 BogoMIPS (lpj=9975267) >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 6144K >CPU 1/1 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 is up >Switched to high resolution mode on CPU 1 >PM: Writing back config space on device 0000:00:01.0 at offset f (was 120105, writing 1a0105) >PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2020, writing 20002020) >PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100) >PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010) >PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:01.0 to 64 >ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:1a.0 to 64 >usb usb1: root hub lost power or was reset >sata_sil24: IRQ status == 0xffffffff, PCI fault or device removal? >ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 >PCI: Setting latency timer of device 0000:00:1a.1 to 64 >usb usb2: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1a.7 to 64 >PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) >ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:1b.0 to 64 >PM: Writing back config space on device 0000:00:1c.0 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:1c.0 to 64 >PM: Writing back config space on device 0000:00:1c.1 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 88018801) >PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing f030f030) >PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 20003030) >PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.1 to 64 >PM: Writing back config space on device 0000:00:1c.2 at offset f (was 40300, writing 40307) >PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing f020f020) >PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing f0) >PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.2 to 64 >PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040a) >PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing 88118811) >PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing f050f050) >PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20004040) >PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.3 to 64 >PM: Writing back config space on device 0000:00:1c.4 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.4 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.4 at offset 8 (was 0, writing f040f040) >PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 20000000, writing 20005050) >PM: Writing back config space on device 0000:00:1c.4 at offset 6 (was 0, writing 70700) >PM: Writing back config space on device 0000:00:1c.4 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.4 to 64 >PM: Writing back config space on device 0000:00:1c.5 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.5 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.5 at offset 8 (was 0, writing f060f060) >PM: Writing back config space on device 0000:00:1c.5 at offset 7 (was 20000000, writing 6060) >PM: Writing back config space on device 0000:00:1c.5 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.5 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.5 to 64 >ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >usb usb3: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >usb usb4: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >usb usb5: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing f070f070) >PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was a2800000, writing a28000f0) >PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100107) >PCI: Setting latency timer of device 0000:00:1e.0 to 64 >PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107) >PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 1ff) >PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) >ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1f.1 to 64 >PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20a) >PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) >PCI: Setting latency timer of device 0000:00:1f.2 to 64 >ata9.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out >ata9.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out >PM: Writing back config space on device 0000:00:1f.3 at offset 4 (was 0, writing 88200000) >PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 105) >PM: Writing back config space on device 0000:01:00.0 at offset 8 (was 1, writing 2001) >PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 4, writing cfef0004) >PM: Writing back config space on device 0000:01:00.0 at offset 4 (was c, writing d000000c) >PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100000, writing 100007) >ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >ata9.00: configured for UDMA/33 >PM: Writing back config space on device 0000:01:00.1 at offset f (was 2ff, writing 20a) >PM: Writing back config space on device 0000:01:00.1 at offset 4 (was 4, writing cfeec004) >PM: Writing back config space on device 0000:01:00.1 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.1 at offset 1 (was 100000, writing 100003) >ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:01:00.1 to 64 >PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:04:00.0 at offset c (was 1, writing 0) >PM: Writing back config space on device 0000:04:00.0 at offset 6 (was 1, writing 3001) >PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing f0300000) >PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100107) >PCI: Enabling device 0000:05:00.0 (0000 -> 0002) >ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 >PM: Writing back config space on device 0000:05:00.0 at offset f (was 100, writing 107) >PM: Writing back config space on device 0000:05:00.0 at offset 4 (was 4, writing f0200004) >PM: Writing back config space on device 0000:05:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100106) >PM: Writing back config space on device 0000:06:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:06:00.0 at offset 6 (was 4, writing f0500004) >PM: Writing back config space on device 0000:06:00.0 at offset 4 (was 1, writing 4001) >PM: Writing back config space on device 0000:06:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100000, writing 100507) >r8169: eth0: link up >PM: Writing back config space on device 0000:07:00.0 at offset f (was 100, writing 105) >PM: Writing back config space on device 0000:07:00.0 at offset 8 (was 1, writing 5001) >PM: Writing back config space on device 0000:07:00.0 at offset 6 (was 4, writing f0400004) >PM: Writing back config space on device 0000:07:00.0 at offset 4 (was 4, writing f0402004) >PM: Writing back config space on device 0000:07:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:07:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:07:00.0 to 64 >PM: Writing back config space on device 0000:08:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:08:00.0 at offset 9 (was 0, writing f0600000) >PM: Writing back config space on device 0000:08:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:08:00.0 to 64 >ata3: SATA link down (SStatus 0 SControl 300) >ata5: SATA link down (SStatus 0 SControl 300) >ata4: SATA link down (SStatus 0 SControl 300) >PM: Writing back config space on device 0000:08:00.1 at offset 8 (was 1, writing 6001) >PM: Writing back config space on device 0000:08:00.1 at offset 7 (was 1, writing 6011) >PM: Writing back config space on device 0000:08:00.1 at offset 6 (was 1, writing 6019) >PM: Writing back config space on device 0000:08:00.1 at offset 5 (was 1, writing 6015) >PM: Writing back config space on device 0000:08:00.1 at offset 4 (was 1, writing 6021) >PM: Writing back config space on device 0000:08:00.1 at offset 1 (was 100000, writing 100005) >ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:08:00.1 to 64 >PM: Writing back config space on device 0000:09:04.0 at offset f (was 100, writing 10b) >PM: Writing back config space on device 0000:09:04.0 at offset 5 (was 0, writing f0700000) >PM: Writing back config space on device 0000:09:04.0 at offset 4 (was f83ff000, writing f0701000) >PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 800000, writing 802010) >PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2100080, writing 2180197) >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f0701000-f07017ff] Max Packet=[2048] IR/IT contexts=[8/8] >ata8: SATA link down (SStatus 0 SControl 0) >ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata7.00: configured for UDMA/133 >ata6.00: configured for UDMA/133 >sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) >sd 6:0:0:0: [sdb] Write Protect is off >sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) >sd 5:0:0:0: [sda] Write Protect is off >sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 5:0:0:0: [sda] Starting disk >sd 6:0:0:0: [sdb] Starting disk >Restarting tasks ... done. >usb 1-1: USB disconnect, address 5 >btusb_send_frame: hci0 urb ffff81006199ecc0 submission failed >usb 1-1: new full speed USB device using uhci_hcd and address 6 >usb 1-1: configuration #1 chosen from 1 choice >usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 >usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=27755 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=30737 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=87.230.27.62 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52743 DF PROTO=TCP SPT=3970 DPT=80 WINDOW=178 RES=0x00 ACK FIN URGP=0 OPT (0101080A000CF191DB059C66) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=87.230.27.62 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=6063 DF PROTO=TCP SPT=3971 DPT=80 WINDOW=55 RES=0x00 ACK FIN URGP=0 OPT (0101080A000CFA6FDB059F29) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=89.28.240.8 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3263 DF PROTO=TCP SPT=26060 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A000CFA6FC91BB10D) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=14535 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=25346 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=63887 DF PROTO=TCP SPT=4782 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A000D18B55667C596) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21577 DF PROTO=TCP SPT=4781 DPT=80 WINDOW=589 RES=0x00 ACK FIN URGP=0 OPT (0101080A000D18B55667C596) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39544 DF PROTO=TCP SPT=4784 DPT=80 WINDOW=239 RES=0x00 ACK FIN URGP=0 OPT (0101080A000D18B55667C596) >SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:03:0d:8c:32:de:00:19:cb:3a:96:b0:08:00 SRC=80.86.84.31 DST=10.0.0.129 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=4782 WINDOW=0 RES=0x00 RST URGP=0 >SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:03:0d:8c:32:de:00:19:cb:3a:96:b0:08:00 SRC=80.86.84.31 DST=10.0.0.129 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=4781 WINDOW=0 RES=0x00 RST URGP=0 >SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:03:0d:8c:32:de:00:19:cb:3a:96:b0:08:00 SRC=80.86.84.31 DST=10.0.0.129 LEN=40 TOS=0x00 PREC=0x00 TTL=57 ID=0 DF PROTO=TCP SPT=80 DPT=4784 WINDOW=0 RES=0x00 RST URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21578 DF PROTO=TCP SPT=4781 DPT=80 WINDOW=589 RES=0x00 ACK FIN URGP=0 OPT (0101080A000D1C825667C596) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21579 DF PROTO=TCP SPT=4781 DPT=80 WINDOW=589 RES=0x00 ACK FIN URGP=0 OPT (0101080A000D2C295667C596) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21581 DF PROTO=TCP SPT=4781 DPT=80 WINDOW=589 RES=0x00 ACK FIN URGP=0 OPT (0101080A000D40D85667C596) >psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39550 DF PROTO=TCP SPT=4784 DPT=80 WINDOW=239 RES=0x00 ACK FIN URGP=0 OPT (0101080A000D66C15667C596) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21584 DF PROTO=TCP SPT=4781 DPT=80 WINDOW=589 RES=0x00 ACK FIN URGP=0 OPT (0101080A000D66C15667C596) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39551 DF PROTO=TCP SPT=4784 DPT=80 WINDOW=239 RES=0x00 ACK FIN URGP=0 OPT (0101080A000D91B55667C596) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21585 DF PROTO=TCP SPT=4781 DPT=80 WINDOW=589 RES=0x00 ACK FIN URGP=0 OPT (0101080A000D91B55667C596) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=80.86.84.31 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39552 DF PROTO=TCP SPT=4784 DPT=80 WINDOW=239 RES=0x00 ACK FIN URGP=0 OPT (0101080A000DD0B55667C596) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=49469 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=56889 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=11928 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=25368 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >PM: Syncing filesystems ... done. >Freezing user space processes ... (elapsed 0.00 seconds) done. >Freezing remaining freezable tasks ... (elapsed 0.33 seconds) done. >Suspending console(s) >btusb 1-1:1.0: no suspend for driver btusb? >btusb_intr_complete: hci0 urb ffff810037846b80 failed to resubmit (1) >sd 6:0:0:0: [sdb] Synchronizing SCSI cache >sd 6:0:0:0: [sdb] Stopping disk >sd 5:0:0:0: [sda] Synchronizing SCSI cache >sd 5:0:0:0: [sda] Stopping disk >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:08:00.1 disabled >ACPI: PCI interrupt for device 0000:08:00.0 disabled >ACPI: PCI interrupt for device 0000:07:00.0 disabled >ACPI: PCI interrupt for device 0000:05:00.0 disabled >ACPI: PCI interrupt for device 0000:01:00.1 disabled >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:00:1f.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.7 disabled >ACPI: PCI interrupt for device 0000:00:1d.2 disabled >ACPI: PCI interrupt for device 0000:00:1d.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.0 disabled >ACPI: PCI interrupt for device 0000:00:1b.0 disabled >ACPI: PCI interrupt for device 0000:00:1a.7 disabled >ACPI: PCI interrupt for device 0000:00:1a.1 disabled >ACPI: PCI interrupt for device 0000:00:1a.0 disabled >ACPI: Preparing to enter system sleep state S3 >Disabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU 1 is now offline >SMP alternatives: switching to UP code >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000001 > groups: 00000000,00000000,00000000,00000001 >CPU1 is down >Extended CMOS year: 2000 > hwsleep-0326 [00] enter_sleep_state : Entering sleep state [S3] >Back to C! >Extended CMOS year: 2000 >Enabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >SMP alternatives: switching to SMP code >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4987.59 BogoMIPS (lpj=9975189) >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 6144K >CPU 1/1 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 is up >Switched to high resolution mode on CPU 1 >PM: Writing back config space on device 0000:00:01.0 at offset f (was 120105, writing 1a0105) >PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2020, writing 20002020) >PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100) >PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010) >PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:01.0 to 64 >ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:1a.0 to 64 >usb usb1: root hub lost power or was reset >sata_sil24: IRQ status == 0xffffffff, PCI fault or device removal? >ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 >PCI: Setting latency timer of device 0000:00:1a.1 to 64 >usb usb2: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1a.7 to 64 >PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) >ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:1b.0 to 64 >PM: Writing back config space on device 0000:00:1c.0 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:1c.0 to 64 >PM: Writing back config space on device 0000:00:1c.1 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 88018801) >PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing f030f030) >PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 3030) >PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.1 to 64 >PM: Writing back config space on device 0000:00:1c.2 at offset f (was 40300, writing 40307) >PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing f020f020) >PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 200000f0) >PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.2 to 64 >PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040a) >PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing 88118811) >PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing f050f050) >PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 4040) >PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.3 to 64 >PM: Writing back config space on device 0000:00:1c.4 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.4 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.4 at offset 8 (was 0, writing f040f040) >PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 20000000, writing 5050) >PM: Writing back config space on device 0000:00:1c.4 at offset 6 (was 0, writing 70700) >PM: Writing back config space on device 0000:00:1c.4 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.4 to 64 >PM: Writing back config space on device 0000:00:1c.5 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.5 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.5 at offset 8 (was 0, writing f060f060) >PM: Writing back config space on device 0000:00:1c.5 at offset 7 (was 20000000, writing 20006060) >PM: Writing back config space on device 0000:00:1c.5 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.5 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.5 to 64 >ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >usb usb3: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >usb usb4: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >usb usb5: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing f070f070) >PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was a2800000, writing a28000f0) >PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100107) >PCI: Setting latency timer of device 0000:00:1e.0 to 64 >PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107) >PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 1ff) >PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) >ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1f.1 to 64 >PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20a) >PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) >PCI: Setting latency timer of device 0000:00:1f.2 to 64 >ata9.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out >ata9.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out >PM: Writing back config space on device 0000:00:1f.3 at offset 4 (was 0, writing 88200000) >PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 105) >PM: Writing back config space on device 0000:01:00.0 at offset 8 (was 1, writing 2001) >PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 4, writing cfef0004) >PM: Writing back config space on device 0000:01:00.0 at offset 4 (was c, writing d000000c) >PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100000, writing 100007) >ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PM: Writing back config space on device 0000:01:00.1 at offset f (was 2ff, writing 20a) >PM: Writing back config space on device 0000:01:00.1 at offset 4 (was 4, writing cfeec004) >PM: Writing back config space on device 0000:01:00.1 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.1 at offset 1 (was 100000, writing 100003) >ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:01:00.1 to 64 >PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:04:00.0 at offset c (was 1, writing 0) >PM: Writing back config space on device 0000:04:00.0 at offset 6 (was 1, writing 3001) >PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing f0300000) >PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100107) >ata9.00: configured for UDMA/33 >PCI: Enabling device 0000:05:00.0 (0000 -> 0002) >ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 >PM: Writing back config space on device 0000:05:00.0 at offset f (was 100, writing 107) >PM: Writing back config space on device 0000:05:00.0 at offset 4 (was 4, writing f0200004) >PM: Writing back config space on device 0000:05:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100106) >ata3: SATA link down (SStatus 0 SControl 300) >ata4: SATA link down (SStatus 0 SControl 300) >ata5: SATA link down (SStatus 0 SControl 300) >PM: Writing back config space on device 0000:06:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:06:00.0 at offset 6 (was 4, writing f0500004) >PM: Writing back config space on device 0000:06:00.0 at offset 4 (was 1, writing 4001) >PM: Writing back config space on device 0000:06:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100000, writing 100507) >r8169: eth0: link up >PM: Writing back config space on device 0000:07:00.0 at offset f (was 100, writing 105) >PM: Writing back config space on device 0000:07:00.0 at offset 8 (was 1, writing 5001) >PM: Writing back config space on device 0000:07:00.0 at offset 6 (was 4, writing f0400004) >PM: Writing back config space on device 0000:07:00.0 at offset 4 (was 4, writing f0402004) >PM: Writing back config space on device 0000:07:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:07:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:07:00.0 to 64 >PM: Writing back config space on device 0000:08:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:08:00.0 at offset 9 (was 0, writing f0600000) >PM: Writing back config space on device 0000:08:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:08:00.0 to 64 >PM: Writing back config space on device 0000:08:00.1 at offset 8 (was 1, writing 6001) >PM: Writing back config space on device 0000:08:00.1 at offset 7 (was 1, writing 6011) >PM: Writing back config space on device 0000:08:00.1 at offset 6 (was 1, writing 6019) >PM: Writing back config space on device 0000:08:00.1 at offset 5 (was 1, writing 6015) >PM: Writing back config space on device 0000:08:00.1 at offset 4 (was 1, writing 6021) >PM: Writing back config space on device 0000:08:00.1 at offset 1 (was 100000, writing 100005) >ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:08:00.1 to 64 >PM: Writing back config space on device 0000:09:04.0 at offset f (was 100, writing 10b) >PM: Writing back config space on device 0000:09:04.0 at offset 5 (was 0, writing f0700000) >PM: Writing back config space on device 0000:09:04.0 at offset 4 (was f83ff000, writing f0701000) >PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 800000, writing 802010) >PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2100080, writing 2180197) >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f0701000-f07017ff] Max Packet=[2048] IR/IT contexts=[8/8] >ata8: SATA link down (SStatus 0 SControl 0) >ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >sd 5:0:0:0: [sda] Starting disk >ata6.00: configured for UDMA/133 >ata7.00: configured for UDMA/133 >sd 6:0:0:0: [sdb] Starting disk >sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) >sd 6:0:0:0: [sdb] Write Protect is off >sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) >sd 5:0:0:0: [sda] Write Protect is off >sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >Restarting tasks ... <6>usb 1-1: USB disconnect, address 6 >btusb_send_frame: hci0 urb ffff8100549c0a80 submission failed >done. >VFS: busy inodes on changed media. >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >usb 1-1: new full speed USB device using uhci_hcd and address 7 >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >usb 1-1: configuration #1 chosen from 1 choice >usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 >usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. >psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away. >psmouse.c: TouchPad at isa0060/serio4/input0 lost synchronization, throwing 2 bytes away. >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=57905 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=25432 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >parse-metadata[7343]: segfault at fffffffa007648d8 ip 412f56 sp 7fff96447c60 error 4 in parse-metadata[400000+2f000] >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=49707 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=23606 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >r8169: eth0: link down >usb 7-1: new high speed USB device using ehci_hcd and address 2 >usb 7-1: configuration #1 chosen from 1 choice >usb 7-1: New USB device found, idVendor=090c, idProduct=1000 >usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >usb 7-1: Product: Flash Voyager >usb 7-1: Manufacturer: Corsair >usb 7-1: SerialNumber: A700000000025756 >Initializing USB Mass Storage driver... >scsi10 : SCSI emulation for USB Mass Storage devices >usbcore: registered new interface driver usb-storage >USB Mass Storage support registered. >usb-storage: device found at 2 >usb-storage: waiting for device to settle before scanning >scsi 10:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS >sd 10:0:0:0: [sdc] 7864320 512-byte hardware sectors (4027 MB) >sd 10:0:0:0: [sdc] Write Protect is off >sd 10:0:0:0: [sdc] Mode Sense: 43 00 00 00 >sd 10:0:0:0: [sdc] Assuming drive cache: write through >sd 10:0:0:0: [sdc] 7864320 512-byte hardware sectors (4027 MB) >sd 10:0:0:0: [sdc] Write Protect is off >sd 10:0:0:0: [sdc] Mode Sense: 43 00 00 00 >sd 10:0:0:0: [sdc] Assuming drive cache: write through > sdc: sdc1 >sd 10:0:0:0: [sdc] Attached SCSI removable disk >sd 10:0:0:0: Attached scsi generic sg3 type 0 >usb-storage: device scan complete >usb 7-1: USB disconnect, address 2 >r8169: eth0: link up >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12245 DF PROTO=TCP SPT=25439 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12246 DF PROTO=TCP SPT=25439 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12247 DF PROTO=TCP SPT=25439 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12248 DF PROTO=TCP SPT=25439 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12249 DF PROTO=TCP SPT=25439 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12250 DF PROTO=TCP SPT=25439 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12251 DF PROTO=TCP SPT=25439 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12252 DF PROTO=TCP SPT=25439 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=130.57.4.16 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12253 DF PROTO=TCP SPT=25439 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=9798 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=25518 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=35429 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=9836 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=87 TOS=0x18 PREC=0x00 TTL=255 ID=47003 PROTO=UDP SPT=5353 DPT=5353 LEN=67 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=87 TOS=0x18 PREC=0x00 TTL=255 ID=56985 PROTO=UDP SPT=5353 DPT=5353 LEN=67 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=87 TOS=0x18 PREC=0x00 TTL=255 ID=62660 PROTO=UDP SPT=5353 DPT=5353 LEN=67 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=87 TOS=0x18 PREC=0x00 TTL=255 ID=15762 PROTO=UDP SPT=5353 DPT=5353 LEN=67 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=29992 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=25539 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=42016 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=6516 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=53431 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=25561 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >r8169: eth0: link down >r8169: eth0: link up >parse-metadata[8190]: segfault at fffffffa007648d8 ip 412f56 sp 7fff51788fa0 error 4 in parse-metadata[400000+2f000] >parse-metadata[8212]: segfault at fffffffa007c6dac ip 412f56 sp 7fffea27da10 error 4 in parse-metadata[400000+2f000] >r8169: eth0: link down >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >r8169: eth0: link up >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=35659 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=25745 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=43627 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=2103 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34674 DF PROTO=TCP SPT=15835 DPT=80 WINDOW=112 RES=0x00 ACK FIN URGP=0 OPT (0101080A0020C4A8456BDFAB) >SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:03:0d:8c:32:de:00:19:cb:3a:96:b0:08:00 SRC=74.125.39.166 DST=10.0.0.129 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=40619 PROTO=TCP SPT=80 DPT=15835 WINDOW=0 RES=0x00 RST URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34675 DF PROTO=TCP SPT=15835 DPT=80 WINDOW=112 RES=0x00 ACK FIN URGP=0 OPT (0101080A0020C4ED456BDFAB) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34676 DF PROTO=TCP SPT=15835 DPT=80 WINDOW=112 RES=0x00 ACK FIN URGP=0 OPT (0101080A0020C577456BDFAB) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34677 DF PROTO=TCP SPT=15835 DPT=80 WINDOW=112 RES=0x00 ACK FIN URGP=0 OPT (0101080A0020C68B456BDFAB) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34678 DF PROTO=TCP SPT=15835 DPT=80 WINDOW=112 RES=0x00 ACK FIN URGP=0 OPT (0101080A0020C8B3456BDFAB) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34681 DF PROTO=TCP SPT=15835 DPT=80 WINDOW=112 RES=0x00 ACK FIN URGP=0 OPT (0101080A0020E6E3456BDFAB) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=56438 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=54301 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=34682 DF PROTO=TCP SPT=15835 DPT=80 WINDOW=112 RES=0x00 ACK FIN URGP=0 OPT (0101080A00210963456BDFAB) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=26592 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=25766 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >r8169: eth0: link down >r8169: eth0: link up >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=192.18.196.109 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=19775 DF PROTO=TCP SPT=4920 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A00297883120899AA) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=192.18.196.109 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27212 DF PROTO=TCP SPT=4924 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A00297891120899A4) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=192.18.196.109 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27560 DF PROTO=TCP SPT=4919 DPT=80 WINDOW=420 RES=0x00 ACK FIN URGP=0 OPT (0101080A00297891120899A8) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=192.18.196.109 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=19776 DF PROTO=TCP SPT=4920 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A002978E3120899AA) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=192.18.196.109 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27561 DF PROTO=TCP SPT=4919 DPT=80 WINDOW=420 RES=0x00 ACK FIN URGP=0 OPT (0101080A002978F6120899A8) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=192.18.196.109 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=19781 DF PROTO=TCP SPT=4920 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A00299023120899AA) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=4426 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=25916 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=192.18.196.109 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=19782 DF PROTO=TCP SPT=4920 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0029A823120899AA) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=192.18.196.109 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=19783 DF PROTO=TCP SPT=4920 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0029D823120899AA) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=192.18.196.109 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27568 DF PROTO=TCP SPT=4919 DPT=80 WINDOW=420 RES=0x00 ACK FIN URGP=0 OPT (0101080A0029DD2C120899A8) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=192.18.196.109 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27220 DF PROTO=TCP SPT=4924 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0029E128120899A4) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=6176 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=39546 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=30452 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=31921 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=16611 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=25938 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >PM: Syncing filesystems ... done. >Freezing user space processes ... (elapsed 0.00 seconds) done. >Freezing remaining freezable tasks ... (elapsed 0.27 seconds) done. >Suspending console(s) >btusb 1-1:1.0: no suspend for driver btusb? >btusb_intr_complete: hci0 urb ffff81005412ce80 failed to resubmit (1) >sd 6:0:0:0: [sdb] Synchronizing SCSI cache >sd 6:0:0:0: [sdb] Stopping disk >sd 5:0:0:0: [sda] Synchronizing SCSI cache >sd 5:0:0:0: [sda] Stopping disk >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:08:00.1 disabled >ACPI: PCI interrupt for device 0000:08:00.0 disabled >ACPI: PCI interrupt for device 0000:07:00.0 disabled >ACPI: PCI interrupt for device 0000:05:00.0 disabled >ACPI: PCI interrupt for device 0000:01:00.1 disabled >ACPI handle has no context! >ACPI: PCI interrupt for device 0000:00:1f.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.7 disabled >ACPI: PCI interrupt for device 0000:00:1d.2 disabled >ACPI: PCI interrupt for device 0000:00:1d.1 disabled >ACPI: PCI interrupt for device 0000:00:1d.0 disabled >ACPI: PCI interrupt for device 0000:00:1b.0 disabled >ACPI: PCI interrupt for device 0000:00:1a.7 disabled >ACPI: PCI interrupt for device 0000:00:1a.1 disabled >ACPI: PCI interrupt for device 0000:00:1a.0 disabled >ACPI: Preparing to enter system sleep state S3 >Disabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU 1 is now offline >SMP alternatives: switching to UP code >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000001 > groups: 00000000,00000000,00000000,00000001 >CPU1 is down >Extended CMOS year: 2000 > hwsleep-0326 [00] enter_sleep_state : Entering sleep state [S3] >Back to C! >Extended CMOS year: 2000 >Enabling non-boot CPUs ... >CPU0 attaching NULL sched-domain. >SMP alternatives: switching to SMP code >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4987.56 BogoMIPS (lpj=9975121) >CPU: L1 I cache: 32K, L1 D cache: 32K >CPU: L2 cache: 6144K >CPU 1/1 -> Node 0 >CPU: Physical Processor ID: 0 >CPU: Processor Core ID: 1 >Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 is up >Switched to high resolution mode on CPU 1 >PM: Writing back config space on device 0000:00:01.0 at offset f (was 120105, writing 1a0105) >PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2020, writing 20002020) >PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100) >PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010) >PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:01.0 to 64 >ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:00:1a.0 to 64 >usb usb1: root hub lost power or was reset >sata_sil24: IRQ status == 0xffffffff, PCI fault or device removal? >ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 >PCI: Setting latency timer of device 0000:00:1a.1 to 64 >usb usb2: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1a.7 to 64 >PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) >ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 >PCI: Setting latency timer of device 0000:00:1b.0 to 64 >PM: Writing back config space on device 0000:00:1c.0 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100007, writing 100407) >PCI: Setting latency timer of device 0000:00:1c.0 to 64 >PM: Writing back config space on device 0000:00:1c.1 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 88018801) >PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing f030f030) >PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 20003030) >PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.1 to 64 >PM: Writing back config space on device 0000:00:1c.2 at offset f (was 40300, writing 40307) >PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing f020f020) >PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing f0) >PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.2 to 64 >PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040a) >PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing 88118811) >PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing f050f050) >PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 20004040) >PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.3 to 64 >PM: Writing back config space on device 0000:00:1c.4 at offset f (was 40100, writing 4010a) >PM: Writing back config space on device 0000:00:1c.4 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.4 at offset 8 (was 0, writing f040f040) >PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 20000000, writing 20005050) >PM: Writing back config space on device 0000:00:1c.4 at offset 6 (was 0, writing 70700) >PM: Writing back config space on device 0000:00:1c.4 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.4 to 64 >PM: Writing back config space on device 0000:00:1c.5 at offset f (was 40200, writing 40205) >PM: Writing back config space on device 0000:00:1c.5 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1c.5 at offset 8 (was 0, writing f060f060) >PM: Writing back config space on device 0000:00:1c.5 at offset 7 (was 20000000, writing 6060) >PM: Writing back config space on device 0000:00:1c.5 at offset 3 (was 810000, writing 810010) >PM: Writing back config space on device 0000:00:1c.5 at offset 1 (was 100000, writing 100507) >PCI: Setting latency timer of device 0000:00:1c.5 to 64 >ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >usb usb3: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >usb usb4: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >usb usb5: root hub lost power or was reset >ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) >PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing f070f070) >PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was a2800000, writing a28000f0) >PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100004, writing 100107) >PCI: Setting latency timer of device 0000:00:1e.0 to 64 >PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107) >PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 1ff) >PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) >ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 >PCI: Setting latency timer of device 0000:00:1f.1 to 64 >PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20a) >PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) >PCI: Setting latency timer of device 0000:00:1f.2 to 64 >ata9.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out >ata9.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out >ata9.00: configured for UDMA/33 >PM: Writing back config space on device 0000:00:1f.3 at offset 4 (was 0, writing 88200000) >PM: Writing back config space on device 0000:01:00.0 at offset f (was 1ff, writing 105) >PM: Writing back config space on device 0000:01:00.0 at offset 8 (was 1, writing 2001) >PM: Writing back config space on device 0000:01:00.0 at offset 6 (was 4, writing cfef0004) >PM: Writing back config space on device 0000:01:00.0 at offset 4 (was c, writing d000000c) >PM: Writing back config space on device 0000:01:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.0 at offset 1 (was 100000, writing 100007) >ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PM: Writing back config space on device 0000:01:00.1 at offset f (was 2ff, writing 20a) >PM: Writing back config space on device 0000:01:00.1 at offset 4 (was 4, writing cfeec004) >PM: Writing back config space on device 0000:01:00.1 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:01:00.1 at offset 1 (was 100000, writing 100003) >ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:01:00.1 to 64 >PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:04:00.0 at offset c (was 1, writing 0) >PM: Writing back config space on device 0000:04:00.0 at offset 6 (was 1, writing 3001) >PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing f0300000) >PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100107) >PCI: Enabling device 0000:05:00.0 (0000 -> 0002) >ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 >PM: Writing back config space on device 0000:05:00.0 at offset f (was 100, writing 107) >PM: Writing back config space on device 0000:05:00.0 at offset 4 (was 4, writing f0200004) >PM: Writing back config space on device 0000:05:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100106) >PM: Writing back config space on device 0000:06:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:06:00.0 at offset 6 (was 4, writing f0500004) >PM: Writing back config space on device 0000:06:00.0 at offset 4 (was 1, writing 4001) >PM: Writing back config space on device 0000:06:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 100000, writing 100507) >r8169: eth0: link down >PM: Writing back config space on device 0000:07:00.0 at offset f (was 100, writing 105) >PM: Writing back config space on device 0000:07:00.0 at offset 8 (was 1, writing 5001) >PM: Writing back config space on device 0000:07:00.0 at offset 6 (was 4, writing f0400004) >PM: Writing back config space on device 0000:07:00.0 at offset 4 (was 4, writing f0402004) >PM: Writing back config space on device 0000:07:00.0 at offset 3 (was 0, writing 10) >PM: Writing back config space on device 0000:07:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >PCI: Setting latency timer of device 0000:07:00.0 to 64 >PM: Writing back config space on device 0000:08:00.0 at offset f (was 100, writing 10a) >PM: Writing back config space on device 0000:08:00.0 at offset 9 (was 0, writing f0600000) >PM: Writing back config space on device 0000:08:00.0 at offset 3 (was 800000, writing 800010) >PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100000, writing 100107) >ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 17 >PCI: Setting latency timer of device 0000:08:00.0 to 64 >ata3: SATA link down (SStatus 0 SControl 300) >ata4: SATA link down (SStatus 0 SControl 300) >ata5: SATA link down (SStatus 0 SControl 300) >PM: Writing back config space on device 0000:08:00.1 at offset 8 (was 1, writing 6001) >PM: Writing back config space on device 0000:08:00.1 at offset 7 (was 1, writing 6011) >PM: Writing back config space on device 0000:08:00.1 at offset 6 (was 1, writing 6019) >PM: Writing back config space on device 0000:08:00.1 at offset 5 (was 1, writing 6015) >PM: Writing back config space on device 0000:08:00.1 at offset 4 (was 1, writing 6021) >PM: Writing back config space on device 0000:08:00.1 at offset 1 (was 100000, writing 100005) >ACPI: PCI Interrupt 0000:08:00.1[B] -> GSI 18 (level, low) -> IRQ 18 >PCI: Setting latency timer of device 0000:08:00.1 to 64 >PM: Writing back config space on device 0000:09:04.0 at offset f (was 100, writing 10b) >PM: Writing back config space on device 0000:09:04.0 at offset 5 (was 0, writing f0700000) >PM: Writing back config space on device 0000:09:04.0 at offset 4 (was f83ff000, writing f0701000) >PM: Writing back config space on device 0000:09:04.0 at offset 3 (was 800000, writing 802010) >PM: Writing back config space on device 0000:09:04.0 at offset 1 (was 2100080, writing 2180197) >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f0701000-f07017ff] Max Packet=[2048] IR/IT contexts=[8/8] >ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >ata6.00: configured for UDMA/133 >ata7.00: configured for UDMA/133 >sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) >sd 5:0:0:0: [sda] Write Protect is off >sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 >sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) >sd 6:0:0:0: [sdb] Write Protect is off >sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 >sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >sd 5:0:0:0: [sda] Starting disk >sd 6:0:0:0: [sdb] Starting disk >ata8: SATA link down (SStatus 0 SControl 0) >Restarting tasks ... done. >usb 1-1: USB disconnect, address 7 >btusb_send_frame: hci0 urb ffff81007e1f8dc0 submission failed >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.0.0.129 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >usb 1-1: new full speed USB device using uhci_hcd and address 8 >usb 1-1: configuration #1 chosen from 1 choice >usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 >usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >hub 7-0:1.0: unable to enumerate USB device on port 5 >usb 5-1: new low speed USB device using uhci_hcd and address 2 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >usb 5-1: configuration #1 chosen from 1 choice >usb 5-1: New USB device found, idVendor=045e, idProduct=0040 >usb 5-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 >usb 5-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM) >usb 5-1: Manufacturer: Microsoft >usbcore: registered new interface driver hiddev >input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb5/5-1/5-1:1.0/input/input8 >input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-1 >usbcore: registered new interface driver usbhid >drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >VFS: busy inodes on changed media. >hub 7-0:1.0: unable to enumerate USB device on port 2 >usb 3-2: new low speed USB device using uhci_hcd and address 2 >usb 3-2: configuration #1 chosen from 1 choice >input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.0/input/input9 >input,hidraw1: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:1d.0-2 >input: USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2:1.1/input/input10 >input,hiddev96,hidraw2: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:1d.0-2 >usb 3-2: New USB device found, idVendor=062a, idProduct=0201 >usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 >usb 3-2: Product: USB-compliant keyboard >parse-metadata[9307]: segfault at fffffffa007648d8 ip 412f56 sp 7fffe2295aa0 error 4 in parse-metadata[400000+2f000] >r8169: eth0: link up >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=63727 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=5623 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=87 TOS=0x18 PREC=0x00 TTL=255 ID=48680 PROTO=UDP SPT=5353 DPT=5353 LEN=67 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=87 TOS=0x18 PREC=0x00 TTL=255 ID=55924 PROTO=UDP SPT=5353 DPT=5353 LEN=67 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=87 TOS=0x18 PREC=0x00 TTL=255 ID=39948 PROTO=UDP SPT=5353 DPT=5353 LEN=67 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=4870 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=26564 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=30033 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=18804 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=60133 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=20951 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=50322 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=26585 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=58150 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=34378 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=7579 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=17846 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=18656 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=26607 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=17241 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=22039 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >CPU0 attaching NULL sched-domain. >CPU1 attaching NULL sched-domain. >CPU0 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000001 00000000,00000000,00000000,00000002 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >CPU1 attaching sched-domain: > domain 0: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000002 00000000,00000000,00000000,00000001 > domain 1: span 00000000,00000000,00000000,00000003 > groups: 00000000,00000000,00000000,00000003 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=27272 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=26628 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=39886 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=18382 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47477 DF PROTO=TCP SPT=26711 DPT=443 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0031093646040EDC) >SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:03:0d:8c:32:de:00:19:cb:3a:96:b0:08:00 SRC=74.125.39.166 DST=10.0.0.129 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=607 PROTO=TCP SPT=443 DPT=26711 WINDOW=0 RES=0x00 RST URGP=0 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47478 DF PROTO=TCP SPT=26711 DPT=443 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A0031097046040EDC) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47479 DF PROTO=TCP SPT=26711 DPT=443 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A003109E446040EDC) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47480 DF PROTO=TCP SPT=26711 DPT=443 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A00310ACC46040EDC) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47481 DF PROTO=TCP SPT=26711 DPT=443 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A00310C9C46040EDC) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=32151 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=45970 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47484 DF PROTO=TCP SPT=26711 DPT=443 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A003125FC46040EDC) >SFW2-OUT-ERROR IN= OUT=eth0 SRC=10.0.0.129 DST=74.125.39.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47485 DF PROTO=TCP SPT=26711 DPT=443 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A003142FC46040EDC) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=18261 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=26650 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=30643 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=6056 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=8750 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=26671 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=2574 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=38161 PROTO=UDP SPT=5353 DPT=5353 LEN=76 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=103 TOS=0x18 PREC=0x00 TTL=255 ID=55940 PROTO=UDP SPT=5353 DPT=5353 LEN=83 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=145 TOS=0x18 PREC=0x00 TTL=255 ID=16856 PROTO=UDP SPT=5353 DPT=5353 LEN=125 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=323 TOS=0x18 PREC=0x00 TTL=255 ID=61659 PROTO=UDP SPT=5353 DPT=5353 LEN=303 >lp: driver loaded but no devices found >ppdev: user-space parallel port driver >lp: driver loaded but no devices found >Uniform Multi-Platform E-IDE driver >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >st: Version 20080221, fixed bufsize 32768, s/g segs 256 >usb 7-1: new high speed USB device using ehci_hcd and address 5 >usb 7-1: device descriptor read/64, error -71 >usb 7-1: device descriptor read/64, error -71 >usb 7-1: new high speed USB device using ehci_hcd and address 6 >usb 7-1: device descriptor read/64, error -71 >usb 7-1: device descriptor read/64, error -71 >usb 7-1: new high speed USB device using ehci_hcd and address 7 >usb 7-1: device not accepting address 7, error -71 >usb 7-1: new high speed USB device using ehci_hcd and address 8 >usb 7-1: device not accepting address 8, error -71 >hub 7-0:1.0: unable to enumerate USB device on port 1 >usb 3-1: new full speed USB device using uhci_hcd and address 3 >usb 3-1: not running at top speed; connect to a high speed hub >usb 3-1: configuration #1 chosen from 1 choice >usb 3-1: New USB device found, idVendor=04f9, idProduct=01cc >usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3 >usb 3-1: SerialNumber: 000F8J284257 >usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x01CC >usbcore: registered new interface driver usblp >lp: driver loaded but no devices found >lp: driver loaded but no devices found >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=91 TOS=0x18 PREC=0x00 TTL=255 ID=45002 PROTO=UDP SPT=5353 DPT=5353 LEN=71 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:80:77:d8:ee:7d:08:00 SRC=10.0.0.128 DST=224.0.0.251 LEN=429 TOS=0x00 PREC=0x00 TTL=255 ID=26693 PROTO=UDP SPT=5353 DPT=5353 LEN=409 >lp: driver loaded but no devices found >lp: driver loaded but no devices found >lp: driver loaded but no devices found >lp: driver loaded but no devices found >lp: driver loaded but no devices found >lp: driver loaded but no devices found >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=58 TOS=0x18 PREC=0x00 TTL=255 ID=33660 PROTO=UDP SPT=5353 DPT=5353 LEN=38 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:1b:63:2f:5e:93:08:00 SRC=10.0.0.130 DST=224.0.0.251 LEN=96 TOS=0x18 PREC=0x00 TTL=255 ID=27216 PROTO=UDP SPT=5353 DPT=5353 LEN=76
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 439431
:
248271
|
248274
|
248623
| 248627 |
256327
|
258058
|
258060