Bugzilla – Attachment 258507 Details for
Bug 457125
harddisk not found
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
boot.msg
boot.msg (text/plain), 36.53 KB, created by
joerg liebers
on 2008-12-07 23:32:46 UTC
(
hide
)
Description:
boot.msg
Filename:
MIME Type:
Creator:
joerg liebers
Created:
2008-12-07 23:32:46 UTC
Size:
36.53 KB
patch
obsolete
>Inspecting /boot/System.map-2.6.27.7-8-default >Cannot find map file. >No module symbols loaded - kernel modules not enabled. > >Cannot build symbol table - disabling symbol lookups >klogd 1.4.1, log source = ksyslog started. ><6>Initializing cgroup subsys cpuset ><6>Initializing cgroup subsys cpu ><5>Linux version 2.6.27.7-8-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-11-25 00:02:37 +0100 ><6>PAT WC disabled due to known CPU erratum. ><6>BIOS-provided physical RAM map: ><6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) ><6> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) ><6> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) ><6> BIOS-e820: 0000000000100000 - 000000007ff40000 (usable) ><6> BIOS-e820: 000000007ff40000 - 000000007ff50000 (ACPI data) ><6> BIOS-e820: 000000007ff50000 - 0000000080000000 (ACPI NVS) ><6>DMI 2.3 present. ><5>AMI BIOS detected: BIOS may corrupt low RAM, working it around. ><6>last_pfn = 0x7ff40 max_arch_pfn = 0x100000 ><7>kernel direct mapping tables up to 38000000 @ 10000-15000 ><6>RAMDISK: 37a02000 - 37fef758 ><4>ACPI: RSDP 000F5DE0, 0014 (r0 ACPIAM) ><4>ACPI: RSDT 7FF40000, 002C (r1 A M I OEMRSDT 8000526 MSFT 97) ><4>ACPI: FACP 7FF40200, 0081 (r1 A M I OEMFACP 8000526 MSFT 97) ><4>ACPI: DSDT 7FF40400, 6653 (r1 1ABSP 1ABSP001 1 MSFT 2000001) ><4>ACPI: FACS 7FF50000, 0040 ><4>ACPI: OEMB 7FF50040, 0053 (r1 A M I OEMBIOS 8000526 MSFT 97) ><5>1151MB HIGHMEM available. ><5>896MB LOWMEM available. ><6> mapped low ram: 0 - 38000000 ><6> low ram: 00000000 - 38000000 ><6> bootmap 00012000 - 00019000 ><6>(9 early reservations) ==> bootmem [0000000000 - 0038000000] ><6> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] ><6> #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] ><6> #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] ><6> #3 [0000100000 - 000065ba5c] TEXT DATA BSS ==> [0000100000 - 000065ba5c] ><6> #4 [0037a02000 - 0037fef758] RAMDISK ==> [0037a02000 - 0037fef758] ><6> #5 [000065c000 - 000065f000] INIT_PG_TABLE ==> [000065c000 - 000065f000] ><6> #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] ><6> #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] ><6> #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] ><4>Zone PFN ranges: ><4> DMA 0x00000010 -> 0x00001000 ><4> Normal 0x00001000 -> 0x00038000 ><4> HighMem 0x00038000 -> 0x0007ff40 ><4>Movable zone start PFN for each node ><4>early_node_map[2] active PFN ranges ><4> 0: 0x00000010 -> 0x0000009f ><4> 0: 0x00000100 -> 0x0007ff40 ><7>On node 0 totalpages: 523983 ><7>free_area_init_node: node 0, pgdat c0528000, node_mem_map c1000240 ><7> DMA zone: 3947 pages, LIFO batch:0 ><7> Normal zone: 223300 pages, LIFO batch:31 ><7> HighMem zone: 292129 pages, LIFO batch:31 ><6>Using APIC driver default ><6>ACPI: PM-Timer IO Port: 0x408 ><6>SMP: Allowing 1 CPUs, 0 hotplug CPUs ><6>Found and enabled local APIC! ><7>mapped APIC to ffffb000 (fee00000) ><6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 ><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 ><6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 ><6>Allocating PCI resources starting at 88000000 (gap: 80000000:80000000) ><6>PERCPU: Allocating 39452 bytes of per cpu data ><7>NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1 ><4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519376 ><5>Kernel command line: root=/dev/sda1 resume=/dev/sda2 splash=silent vga=0x317 ><6>bootsplash: silent mode. ><6>Enabling fast FPU save and restore... done. ><6>Enabling unmasked SIMD FPU exception support... done. ><6>Initializing CPU#0 ><4>PID hash table entries: 4096 (order: 12, 16384 bytes) ><6>TSC: PIT calibration confirmed by PMTIMER. ><6>TSC: using PIT calibration value ><4>Detected 2000.060 MHz processor. ><4>Console: colour dummy device 80x25 ><6>console [tty0] enabled ><6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) ><6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) ><6>Memory: 2064300k/2096384k available (2369k kernel code, 30900k reserved, 1974k data, 320k init, 1178880k highmem) ><6>virtual kernel memory layout: ><6> fixmap : 0xffdf6000 - 0xfffff000 (2084 kB) ><6> pkmap : 0xff400000 - 0xff800000 (4096 kB) ><6> vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) ><6> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) ><6> .init : 0xc0544000 - 0xc0594000 ( 320 kB) ><6> .data : 0xc03504cb - 0xc053dd08 (1974 kB) ><6> .text : 0xc0100000 - 0xc03504cb (2369 kB) ><6>Checking if this processor honours the WP bit even in supervisor mode...Ok. ><7>CPA: page pool initialized 1 of 1 pages preallocated ><6>Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.12 BogoMIPS (lpj=8000240) ><4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved ><6>Security Framework initialized ><6>SELinux: Disabled at boot. ><6>AppArmor: AppArmor initialized ><4>Mount-cache hash table entries: 512 ><6>Initializing cgroup subsys ns ><6>Initializing cgroup subsys cpuacct ><6>Initializing cgroup subsys memory ><6>Initializing cgroup subsys devices ><6>Initializing cgroup subsys freezer ><6>CPU: L1 I cache: 32K, L1 D cache: 32K ><6>CPU: L2 cache: 2048K ><6>Intel machine check architecture supported. ><6>Intel machine check reporting enabled on CPU#0. ><6>Checking 'hlt' instruction... OK. ><6>SMP alternatives: switching to UP code ><6>Freeing SMP alternatives: 12k freed ><6>ACPI: Core revision 20080609 ><6>ACPI: Checking initramfs for custom DSDT ><4>Parsing all Control Methods: ><4>Table [DSDT](id 0001) - 954 Objects with 56 Devices 260 Methods 28 Regions ><4> tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired ><4>ACPI: setting ELCR to 0200 (from 0ea0) ><4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful ><4>weird, boot CPU (#0) not listedby the BIOS. ><5>SMP motherboard not detected. ><6>SMP disabled ><6>Brought up 1 CPUs ><6>Total of 1 processors activated (4000.12 BogoMIPS). ><7>CPU0 attaching NULL sched-domain. ><6>net_namespace: 1044 bytes ><6>Booting paravirtualized kernel on bare hardware ><6>NET: Registered protocol family 16 ><6>ACPI: bus type pci registered ><6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 ><6>PCI: Using configuration type 1 for base access ><5>perfmon: version 2.82 ><5>perfmon: CPU hotplug support enabled ><4>evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 ><7>ACPI: EC: Look up EC in DSDT ><4>Completing Region/Field/Buffer/Package initialization:................................................................................................................................ ><4>Initialized 26/28 Regions 34/35 Fields 43/44 Buffers 25/25 Packages (963 nodes) ><4>Initializing Device/Processor/Thermal objects by executing _INI methods:...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode ><4>. ><4>Executed 4 _INI methods requiring 0 _STA executions (examined 60 objects) ><4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 8 Runtime GPEs in this block ><6>ACPI: Interpreter enabled ><6>ACPI: (supports S0 S3 S4 S5) ><6>ACPI: Using PIC for interrupt routing ><6>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ><6>ACPI: EC: driver started in interrupt mode ><6>ACPI: PCI Root Bridge [PCI0] (0000:00) ><7>PCI: 0000:00:00.0 reg 10 32bit mmio: [f0000000, f7ffffff] ><7>PCI: 0000:00:1d.0 reg 20 io port: [e800, e81f] ><7>PCI: 0000:00:1d.1 reg 20 io port: [e880, e89f] ><7>PCI: 0000:00:1d.2 reg 20 io port: [ec00, ec1f] ><7>PCI: 0000:00:1d.7 reg 10 32bit mmio: [ffaffc00, ffafffff] ><6>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold ><6>pci 0000:00:1d.7: PME# disabled ><6>HPET not enabled in BIOS. You might try hpet=force boot option ><6>pci 0000:00:1f.0: Enabled i801 SMBus device ><6>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO ><6>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO ><7>PCI: 0000:00:1f.1 reg 10 io port: [0, 7] ><7>PCI: 0000:00:1f.1 reg 14 io port: [0, 3] ><7>PCI: 0000:00:1f.1 reg 18 io port: [0, 7] ><7>PCI: 0000:00:1f.1 reg 1c io port: [0, 3] ><7>PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf] ><7>PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff] ><7>PCI: 0000:00:1f.3 reg 20 io port: [540, 55f] ><7>PCI: 0000:00:1f.5 reg 10 io port: [e400, e4ff] ><7>PCI: 0000:00:1f.5 reg 14 io port: [e080, e0bf] ><7>PCI: 0000:00:1f.5 reg 18 32bit mmio: [ffaff800, ffaff9ff] ><7>PCI: 0000:00:1f.5 reg 1c 32bit mmio: [ffaff400, ffaff4ff] ><6>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold ><6>pci 0000:00:1f.5: PME# disabled ><7>PCI: 0000:01:00.0 reg 10 32bit mmio: [e0000000, e7ffffff] ><7>PCI: 0000:01:00.0 reg 14 io port: [c800, c8ff] ><7>PCI: 0000:01:00.0 reg 18 32bit mmio: [ff8f0000, ff8fffff] ><7>PCI: 0000:01:00.0 reg 30 32bit mmio: [ff8c0000, ff8dffff] ><7>pci 0000:01:00.0: supports D1 ><7>pci 0000:01:00.0: supports D2 ><7>PCI: bridge 0000:00:01.0 io port: [c000, cfff] ><7>PCI: bridge 0000:00:01.0 32bit mmio: [ff800000, ff8fffff] ><7>PCI: bridge 0000:00:01.0 32bit mmio pref: [de900000, ee9fffff] ><7>PCI: 0000:02:00.0 reg 10 32bit mmio: [ff9fc000, ff9fffff] ><7>PCI: 0000:02:00.0 reg 14 io port: [d800, d8ff] ><7>PCI: 0000:02:00.0 reg 30 32bit mmio: [ff9c0000, ff9dffff] ><7>pci 0000:02:00.0: supports D1 ><7>pci 0000:02:00.0: supports D2 ><6>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold ><6>pci 0000:02:00.0: PME# disabled ><7>PCI: 0000:02:01.0 reg 10 32bit mmio: [0, fff] ><7>pci 0000:02:01.0: supports D1 ><7>pci 0000:02:01.0: supports D2 ><6>pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold ><6>pci 0000:02:01.0: PME# disabled ><7>PCI: 0000:02:01.1 reg 10 32bit mmio: [ff9fb000, ff9fb7ff] ><6>pci 0000:02:01.1: PME# supported from D0 D3hot D3cold ><6>pci 0000:02:01.1: PME# disabled ><7>PCI: 0000:02:01.2 reg 10 32bit mmio: [ff9fb800, ff9fb8ff] ><7>pci 0000:02:01.2: supports D1 ><7>pci 0000:02:01.2: supports D2 ><6>pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold ><6>pci 0000:02:01.2: PME# disabled ><7>PCI: 0000:02:01.3 reg 10 32bit mmio: [ff9fbc00, ff9fbcff] ><7>pci 0000:02:01.3: supports D1 ><7>pci 0000:02:01.3: supports D2 ><6>pci 0000:02:01.3: PME# supported from D0 D1 D2 D3hot D3cold ><6>pci 0000:02:01.3: PME# disabled ><7>PCI: 0000:02:02.0 reg 10 32bit mmio: [ff9fa000, ff9fafff] ><6>pci 0000:02:02.0: PME# supported from D0 D3hot D3cold ><6>pci 0000:02:02.0: PME# disabled ><6>pci 0000:00:1e.0: transparent bridge ><7>PCI: bridge 0000:00:1e.0 io port: [d000, dfff] ><7>PCI: bridge 0000:00:1e.0 32bit mmio: [ff900000, ff9fffff] ><7>PCI: bridge 0000:00:1e.0 32bit mmio pref: [eea00000, eeafffff] ><7>bus 00 -> node 0 ><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) ><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 11 12) ><6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ><6>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10) ><6>ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled. ><6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled. ><6>ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled. ><6>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12) ><6>Linux Plug and Play Support v0.97 (c) Adam Belay ><6>pnp: PnP ACPI init ><6>ACPI: bus type pnp registered ><6>pnp: PnP ACPI: found 13 devices ><6>ACPI: ACPI bus type pnp unregistered ><6>PnPBIOS: Disabled by ACPI PNP ><6>PCI: Using ACPI for IRQ routing ><6>AppArmor: AppArmor Filesystem Enabled ><4>ACPI: RTC can wake from S4 ><6>system 00:07: ioport range 0xa00-0xa0f has been reserved ><6>system 00:08: ioport range 0x4d0-0x4d1 has been reserved ><6>system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved ><6>system 00:0b: ioport range 0x540-0x55f has been reserved ><6>system 00:0b: ioport range 0x400-0x47f has been reserved ><6>system 00:0b: ioport range 0x500-0x53f has been reserved ><6>system 00:0b: ioport range 0x4c0-0x4cf has been reserved ><6>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved ><6>system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved ><6>system 00:0c: iomem range 0x0-0x9ffff could not be reserved ><6>system 00:0c: iomem range 0xc0000-0xdffff could not be reserved ><6>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved ><6>system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved ><6>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 ><6>pci 0000:00:01.0: IO window: 0xc000-0xcfff ><6>pci 0000:00:01.0: MEM window: 0xff800000-0xff8fffff ><6>pci 0000:00:01.0: PREFETCH window: 0x000000de900000-0x000000ee9fffff ><6>pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 ><6>pci 0000:02:01.0: IO window: 0x00d000-0x00d0ff ><6>pci 0000:02:01.0: IO window: 0x00d400-0x00d4ff ><6>pci 0000:02:01.0: PREFETCH window: 0x8c000000-0x8fffffff ><6>pci 0000:02:01.0: MEM window: 0x90000000-0x93ffffff ><6>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 ><6>pci 0000:00:1e.0: IO window: 0xd000-0xdfff ><6>pci 0000:00:1e.0: MEM window: 0xff900000-0xff9fffff ><6>pci 0000:00:1e.0: PREFETCH window: 0x000000eea00000-0x000000eeafffff ><7>pci 0000:00:1e.0: setting latency timer to 64 ><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7 ><6>vendor=8086 device=2448 ><7>PCI: setting IRQ 7 as level-triggered ><6>pci 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7 ><7>pci 0000:02:01.0: setting latency timer to 64 ><6>bus: 00 index 0 io port: [0, ffff] ><6>bus: 00 index 1 mmio: [0, ffffffff] ><6>bus: 01 index 0 io port: [c000, cfff] ><6>bus: 01 index 1 mmio: [ff800000, ff8fffff] ><6>bus: 01 index 2 mmio: [de900000, ee9fffff] ><6>bus: 01 index 3 mmio: [0, 0] ><6>bus: 02 index 0 io port: [d000, dfff] ><6>bus: 02 index 1 mmio: [ff900000, ff9fffff] ><6>bus: 02 index 2 mmio: [eea00000, eeafffff] ><6>bus: 02 index 3 io port: [0, ffff] ><6>bus: 02 index 4 mmio: [0, ffffffff] ><6>bus: 03 index 0 io port: [d000, d0ff] ><6>bus: 03 index 1 io port: [d400, d4ff] ><6>bus: 03 index 2 mmio: [8c000000, 8fffffff] ><6>bus: 03 index 3 mmio: [90000000, 93ffffff] ><6>NET: Registered protocol family 2 ><6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) ><6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) ><6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) ><6>TCP: Hash tables configured (established 131072 bind 65536) ><6>TCP reno registered ><6>NET: Registered protocol family 1 ><6>Unpacking initramfs... done ><6>Freeing initrd memory: 6069k freed ><6>Machine check exception polling timer started. ><6>audit: initializing netlink socket (disabled) ><5>type=2000 audit(1228690057.844:1): initialized ><4>highmem bounce pool size: 64 pages ><6>HugeTLB registered 4 MB page size, pre-allocated 0 pages ><5>VFS: Disk quotas dquot_6.5.1 ><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) ><6>msgmni has been set to 435 ><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) ><6>io scheduler noop registered ><6>io scheduler anticipatory registered ><6>io scheduler deadline registered ><6>io scheduler cfq registered (default) ><6>perfmon: added sampling format default ><7>pci 0000:01:00.0: Boot video device ><6>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total 65536k ><6>vesafb: mode is 1024x768x16, linelength=2048, pages=41 ><6>vesafb: protected mode interface info at c000:56e3 ><6>vesafb: pmi: set display start = c00c5751, set palette = c00c578b ><6>vesafb: pmi: ports = c810 c816 c854 c838 c83c c85c c800 c804 c8b0 c8b2 c8b4 ><6>vesafb: scrolling: redraw ><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 ><6>bootsplash 3.1.6-2004/03/31: looking for picture... ><6>bootsplash: silentjpeg size 100719 bytes ><6>bootsplash: ...found (1024x768, 38691 bytes, v3). ><4>Console: switching to colour frame buffer device 124x44 ><7>Switched to high resolution mode on CPU 0 ><6>fb0: VESA VGA frame buffer device ><6>isapnp: Scanning for PnP cards... ><6>isapnp: No Plug & Play device found ><6>Serial: 8250/16550 driver8 ports, IRQ sharing enabled ><6>PNP: PS/2 Controller [PNP030b:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 ><6>i8042.c: Detected active multiplexing controller, rev 1.1. ><6>serio: i8042 KBD port at 0x60,0x64 irq 1 ><6>serio: i8042 AUX0 port at 0x60,0x64 irq 12 ><6>serio: i8042 AUX1 port at 0x60,0x64 irq 12 ><6>serio: i8042 AUX2 port at 0x60,0x64 irq 12 ><6>serio: i8042 AUX3 port at 0x60,0x64 irq 12 ><6>mice: PS/2 mouse device common for all mice ><6>cpuidle: using governor ladder ><6>cpuidle: using governor menu ><6>TCP cubic registered ><4>Using IPI No-Shortcut mode ><4>registered taskstats version 1 ><6>Freeing unused kernel memory: 320k freed ><6>Write protecting the kernel text: 2372k ><6>Write protecting the kernel read-only data: 1776k ><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ><3>ACPI: Invalid PBLK length [7] ><6>ACPI: CPU0 (power states: C1[C1] C2[C2]) ><6>processor ACPI_CPU:00: registered as cooling_device0 ><4>Marking TSC unstable due to TSC halts in idle ><6>thermal LNXTHERM:01: registered as thermal_zone0 ><6>ACPI: Thermal Zone [THRM] (80 C) ><6>ACPI: ACPI Dock Station Driver: 1 docks/bays found ><5>SCSI subsystem initialized ><7>libata version 3.00 loaded. ><7>ata_piix 0000:00:1f.1: version 2.12 ><6>ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ><4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 ><7>PCI: setting IRQ 9 as level-triggered ><6>ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 ><7>ata_piix 0000:00:1f.1: setting latency timer to 64 ><6>scsi0 : ata_piix ><6>scsi1 : ata_piix ><6>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ><6>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ><6>ata1: clearing spurious IRQ ><6>ata1.00: ATA-7: Hitachi HTS541616J9AT00, SB4OA70H, max UDMA/100 ><6>ata1.00: 312581808 sectors, multi 16: LBA48 ><6>ata1: clearing spurious IRQ ><6>ata1: clearing spurious IRQ ><6>ata1.00: configured for UDMA/100 ><6>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 ><6>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1 ><6>ata2: clearing spurious IRQ ><6>ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L532A, TI51, max UDMA/33 ><6>ata2: clearing spurious IRQ ><6>ata2: clearing spurious IRQ ><6>ata2.00: configured for UDMA/33 ><5>scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 ><5>scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L532A TI51 PQ: 0 ANSI: 5 ><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found ><6>udevd version 128 started ><6>usbcore: registered new interface driver usbfs ><6>usbcore: registered new interface driver hub ><6>usbcore: registered new device driver usb ><4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ><7>PCI: setting IRQ 10 as level-triggered ><6>ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 ><7>ehci_hcd 0000:00:1d.7: setting latency timer to 64 ><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller ><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ><6>ehci_hcd 0000:00:1d.7: debug port 1 ><7>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ><6>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffaffc00 ><6>USB Universal Host Controller Interface driver v3.0 ><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 ><6>usb usb1: configuration #1 chosen from 1 choice ><6>hub 1-0:1.0: USB hub found ><6>hub 1-0:1.0: 6 ports detected ><5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB) ><5>sd 0:0:0:0: [sda] Write Protect is off ><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 ><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 ><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>usb usb1: Product: EHCI Host Controller ><6>usb usb1: Manufacturer: Linux 2.6.27.7-8-default ehci_hcd ><6>usb usb1: SerialNumber: 0000:00:1d.7 ><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ><7>PCI: setting IRQ 11 as level-triggered ><6>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ><7>uhci_hcd 0000:00:1d.0: setting latency timer to 64 ><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller ><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ><6>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800 ><6>usb usb2: configuration #1 chosen from 1 choice ><6>hub 2-0:1.0: USB hub found ><6>hub 2-0:1.0: 2 ports detected ><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ><5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB) ><5>sd 0:0:0:0: [sda] Write Protect is off ><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 ><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ><6> sda: sda1 sda2 sda3 sda4 ><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 ><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>usb usb2: Product: UHCI Host Controller ><6>usb usb2: Manufacturer: Linux 2.6.27.7-8-default uhci_hcd ><6>usb usb2: SerialNumber: 0000:00:1d.0 ><4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 ><7>PCI: setting IRQ 5 as level-triggered ><6>uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 ><7>uhci_hcd 0000:00:1d.1: setting latency timer to 64 ><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller ><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 ><6>uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e880 ><6>usb usb3: configuration #1 chosen from 1 choice ><6>hub 3-0:1.0: USB hub found ><6>hub 3-0:1.0: 2 ports detected ><5>sd 0:0:0:0: [sda] Attached SCSI disk ><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 ><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>usb usb3: Product: UHCI Host Controller ><6>usb usb3: Manufacturer: Linux 2.6.27.7-8-default uhci_hcd ><6>usb usb3: SerialNumber: 0000:00:1d.1 ><6>uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 ><7>uhci_hcd 0000:00:1d.2: setting latency timer to 64 ><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller ><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 ><6>uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000ec00 ><6>usb usb4: configuration #1 chosen from 1 choice ><6>hub 4-0:1.0: USB hub found ><6>hub 4-0:1.0: 2 ports detected ><6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 ><6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 ><6>usb usb4: Product: UHCI Host Controller ><6>usb usb4: Manufacturer: Linux 2.6.27.7-8-default uhci_hcd ><6>usb usb4: SerialNumber: 0000:00:1d.2 ><6>PM: Starting manual resume from disk ><6>kjournald starting. Commit interval 5 seconds ><6>EXT3 FS on sda1, internal journal ><6>EXT3-fs: mounted filesystem with ordered data mode. ><6>udevd version 128 started ><6>Linux agpgart interface v0.103 ><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ><5>sd 0:0:0:0: Attached scsi generic sg0 type 0 ><5>scsi 1:0:0:0: Attached scsi generic sg1 type 5 ><6>agpgart-intel 0000:00:00.0: Intel 855PM Chipset ><6>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 ><5>intel_rng: FWH not detected ><6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 ><6>rtc0: alarms up to one month ><6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ><6>input: PC Speaker as /devices/platform/pcspkr/input/input3 ><4>sr0: scsi3-mmc drive: 16x/24x writer cd/rw xa/form2 cdda tray ><6>Uniform CD-ROM driver Revision: 3.20 ><7>sr 1:0:0:0: Attached scsi CD-ROM sr0 ><6>ACPI: Power Button (FF) [PWRF] ><6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 ><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ><6>ACPI: Lid Switch [LID] ><6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 ><6>iTCO_vendor_support: vendor-support=0 ><6>i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7 ><6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) ><6>ACPI: Sleep Button (CM) [SLPB] ><6>ACPI: AC Adapter [AC] (on-line) ><6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 ><6>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0460) ><6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ><6>Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7 ><7>Intel ICH 0000:00:1f.5: setting latency timer to 64 ><6>ACPI: Power Button (CM) [PWRB] ><6>ACPI: Battery Slot [BAT0] (battery present) ><5>asus-laptop: Asus Laptop Support version 0.42 ><5>asus-laptop: W3N model detected ><6>ACPI: Battery Slot [BAT1] (battery absent) ><6>Registered led device: asus::mail ><6>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/device:10/input/input7 ><6>ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ><7>ieee80211_crypt: registered algorithm 'NULL' ><6>ieee80211: 802.11 data/management/control stack, git-1.1.13 ><6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ><6>sdhci: Secure Digital Host Controller Interface driver ><6>sdhci: Copyright(c) Pierre Ossman ><6>intel8x0_measure_ac97_clock: measured 64796 usecs ><6>intel8x0: clocking to 48000 ><6>vendor=8086 device=2448 ><6>skge 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 ><6>skge 1.13 addr 0xff9fc000 irq 9 chip Yukon-Lite rev 9 ><6>skge eth0: addr 00:11:d8:8b:2e:33 ><6>vendor=8086 device=2448 ><6>ohci1394 0000:02:01.1: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ><6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[ff9fb000-ff9fb7ff] Max Packet=[2048] IR/IT contexts=[4/4] ><6>Yenta: CardBus bridge found at 0000:02:01.0 [1043:1987] ><6>Yenta: ISA IRQ mask 0x0018, PCI irq 7 ><6>Socket status: 30000006 ><6>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 ><6>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff ><6>cs: IO port probe 0xd000-0xdfff: clean. ><6>pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff ><6>pcmcia: parent PCI bridge Memory window: 0xeea00000 - 0xeeafffff ><6>sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 17) ><6>vendor=8086 device=2448 ><6>sdhci-pci 0000:02:01.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 ><6>mmc0: SDHCI controller on PCI [0000:02:01.2] using PIO ><6>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq ><6>ipw2200: Copyright(c) 2003-2006 Intel Corporation ><6>vendor=8086 device=2448 ><6>ipw2200 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 ><6>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ><6>firmware: requesting ipw2200-bss.fw ><7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800032a2cd9] ><4>Clocksource tsc unstable (delta = -487626752 ns) ><3>ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2 ><3>ipw2200: Unable to load firmware: -2 ><3>ipw2200: failed to register network device ><6>vendor=8086 device=2448 ><6>ipw2200 0000:02:02.0: PCI INT A disabled ><4>ipw2200: probe of 0000:02:02.0 failed with error -5 ><6>Adding 2104504k swap on /dev/sda2. Priority:-1 extents:1 across:2104504k ><6>device-mapper: uevent: version 1.0.3 ><6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com ><6>loop: module loaded ><6>kjournald starting. Commit interval 5 seconds ><6>EXT3 FS on sda4, internal journal ><6>EXT3-fs: mounted filesystem with ordered data mode. ><6>kjournald starting. Commit interval 5 seconds ><6>EXT3 FS on sda3, internal journal ><6>EXT3-fs: mounted filesystem with ordered data mode. ><4>fuse init (API version 7.9) >Kernel logging (ksyslog) stopped. >Kernel log daemon terminating. > >Boot logging started on /dev/tty1(/dev/console) at Sun Dec 7 22:48:11 2008 > > > >After the udevadm settle timeout, the events queue contains: > >8918: /devices/system/cpu/cpu0/cpuidle/state2 > > >Trying manual resume from /dev/sda2 > > >After the udevadm settle timeout, the events queue contains: > >9322: /devices/system/cpu/cpu0/cpuidle/state0 > > >Invoking userspace resume from /dev/sda2 >resume: libgcrypt version: 1.4.1 >Trying manual resume from /dev/sda2 > > >After the udevadm settle timeout, the events queue contains: > >9723: /devices/system/cpu/cpu0/cpuidle/state1 > > >Invoking in-kernel resume from /dev/sda2 >Waiting for device /dev/sda1 to appear: ok >fsck 1.41.1 (01-Sep-2008) >[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda1 >/dev/sda1: clean, 87415/1313280 files, 689756/5242880 blocks >fsck succeeded. Mounting root device read-write. >Mounting root /dev/sda1 >boot/91-killudev.sh: line 17: kill: (8424) - No such process > >Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Dec 7 23:49:46 2008 > >done >Starting udevd: done >Loading drivers, configuring devices: udevd[8490]: unable to receive kernel netlink message: No buffer space available > > >done >Loading required kernel modules >doneActivating swap-devices in /etc/fstab... >doneSetting up the hardware clockdone >Activating device mapper... >done >Checking file systems... >fsck 1.41.1 (01-Sep-2008) >/dev/sda4: clean, 14948/11419648 files, 19835403/22816316 blocks >/dev/sda3: clean, 110695/5248992 files, 8952883/10486428 blocks >donedone >Mounting local file systems... >/proc on /proc type proc (rw) >sysfs on /sys type sysfs (rw) >debugfs on /sys/kernel/debug type debugfs (rw) >udev on /dev type tmpfs (rw) >devpts on /dev/pts type devpts (rw,mode=0620,gid=5) >/dev/sda4 on /data type ext3 (rw,noexec,nosuid,nodev,acl) >/dev/sda3 on /home type ext3 (rw) >donedone >Loading fuse module done >Mounting fuse control filesystemdone >Setting current sysctl status from /etc/sysctl.conf >net.ipv4.icmp_echo_ignore_broadcasts = 1 >net.ipv4.conf.all.rp_filter = 1 >fs.inotify.max_user_watches = 65536 >net.ipv4.conf.default.promote_secondaries = 1 >net.ipv4.conf.all.promote_secondaries = 1 >done >Activating remaining swap-devices in /etc/fstab... >doneEnabling syn flood protectiondone >Disabling IP forwardingdone >done ><notice>killproc: kill(8458,29) >Creating /var/log/boot.msg >doneTurning quota on >Checking quotas. This may take some time. >done >Setting up hostname 'linux-5wbg'done >Setting up loopback interface lo > lo IP address: 127.0.0.1/8 > IP address: 127.0.0.2/8 >done >System Boot Control: The system has been set up >System Boot Control: Running /etc/init.d/boot.local >done<notice>killproc: kill(8458,3) > >INIT: >Boot logging started on /dev/tty1(/dev/console) at Sun Dec 7 22:51:10 2008 > >Entering runlevel: 5 > > >Master Resource Control: previous runlevel: N, switching to runlevel: 5 >Starting syslog services<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] ><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/sbin/klogd ] >done >Starting D-Bus daemondone >Starting acpid <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/sbin/acpid ] >done >Loading CPUFreq modulesdone >Starting HAL daemondone >Starting Firewall Initialization (phase 1 of 2) done >Starting service kdm<notice>startproc: execve (/usr/bin/kdm) [ /usr/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/ LANG=en_US.UTF-8 PREVLEVEL=N LINES=44 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER= SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/usr/bin/kdm ] >done >Starting rpcbind <notice>startproc: execve (/sbin/rpcbind) [ /sbin/rpcbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/sbin/rpcbind ] >done >Not starting NFS client services - no NFS found in /etc/fstab:unused >Loading keymap assuming iso-8859-15 euro >Loading /usr/share/kbd/keymaps/i386/qwertz/de-latin1-nodeadkeys.map.gz >doneLoading compose table latin1.adddone >Start Unicode mode >done<notice>checkproc: /usr/bin/kdm 21036 ><notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -s disable ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/sbin/auditd ] >Starting auditd done >Starting Avahi daemon done >Starting brlddone >Starting a11y check >done >Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] >done >Starting java.binfmt_misc done ><notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts DO_CONFIRM= vga=0x317 RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PWD=/etc/sysconfig/network PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] ><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] >Starting Name Service Cache Daemondone >Starting the NetworkManagerdone >Starting suse-blinuxdone >Initializing random number generatordone >Starting smartd done ><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] >Starting mail service (Postfix)done >Starting SSH daemondone >Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=124 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x317 DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda1 _=/sbin/startproc DAEMON=/usr/sbin/cron ] >done >Starting Firewall Initialization (phase 2 of 2) done ><notice>checkproc: /usr/bin/kdm 21036 >done >Master Resource Control: runlevel 5 has been reached >Skipped services in runlevel 5: nfs ><notice>killproc: kill(20708,3)
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 457125
: 258507 |
265551
|
265552
|
265553