Attachment 262501 Details for Bug 462637

lspci -vv output

lspci_vv.txt (text/plain), 35.99 KB, created by Vadim Plessky on 2008-12-27 13:28:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Vadim Plessky

Created: 2008-12-27 13:28:10 UTC

Size: 35.99 KB

patch

obsolete

>00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
>	Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [c4] HyperTransport: Slave or Primary Interface
>		Command: BaseUnitID=20 UnitCnt=12 MastHost- DefDir- DUL-
>		Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>		Revision ID: 3.00
>		Link Frequency 0: [a]
>		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>		Link Frequency 1: 200MHz
>		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>		Prefetchable memory behind bridge Upper: 00-00
>		Bus Number: 00
>	Capabilities: [54] HyperTransport: UnitID Clumping
>	Capabilities: [40] HyperTransport: Retry Mode
>	Capabilities: [9c] HyperTransport: #1a
>	Capabilities: [f8] HyperTransport: #1c
>
>00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	I/O behind bridge: 0000b000-0000bfff
>	Memory behind bridge: fdb00000-fdcfffff
>	Prefetchable memory behind bridge: 00000000b0000000-00000000bfffffff
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
>	Capabilities: [b0] Subsystem: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
>	Kernel modules: shpchp
>
>00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 0000c000-0000cfff
>	Memory behind bridge: fdd00000-fddfffff
>	Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag+ RBE+ FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep+ BwNot+
>		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>			Slot #  2, PowerLimit 75.000000; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB
>	Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>	Capabilities: [100] Vendor Specific Information <?>
>	Capabilities: [110] Virtual Channel <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	Memory behind bridge: fde00000-fdefffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag+ RBE+ FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep+ BwNot+
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>			Slot #  4, PowerLimit 25.000000; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB
>	Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>	Capabilities: [100] Vendor Specific Information <?>
>	Capabilities: [110] Virtual Channel <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: fdf00000-fdffffff
>	Prefetchable memory behind bridge: 00000000f9f00000-00000000f9ffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag+ RBE+ FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep+ BwNot+
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
>			Slot #  5, PowerLimit 25.000000; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB
>	Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>	Capabilities: [100] Vendor Specific Information <?>
>	Capabilities: [110] Virtual Channel <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: fe000000-feafffff
>	Prefetchable memory behind bridge: 00000000fa000000-00000000fcffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag+ RBE+ FLReset-
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #247, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep+ BwNot+
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
>			Slot #  6, PowerLimit 25.000000; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB
>	Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>	Capabilities: [100] Vendor Specific Information <?>
>	Capabilities: [110] Virtual Channel <?>
>	Kernel driver in use: pcieport-driver
>	Kernel modules: shpchp
>
>00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
>	Subsystem: ASUSTeK Computer Inc. Device 1117
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 22
>	Region 0: I/O ports at a000 [size=8]
>	Region 1: I/O ports at 9000 [size=4]
>	Region 2: I/O ports at 8000 [size=8]
>	Region 3: I/O ports at 7000 [size=4]
>	Region 4: I/O ports at 6000 [size=16]
>	Region 5: Memory at fdaff800 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [70] SATA HBA <?>
>	Kernel driver in use: ahci
>
>00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fdafe000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>
>00:12.1 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fdafd000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>
>00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at fdaff000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>		Bridge: PM- B3+
>	Capabilities: [e4] Debug port: BAR=1 offset=00e0
>	Kernel driver in use: ehci_hcd
>
>00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	Region 0: Memory at fdafc000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>
>00:13.1 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	Region 0: Memory at fdafb000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>
>00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 19
>	Region 0: Memory at fdafa800 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>		Bridge: PM- B3+
>	Capabilities: [e4] Debug port: BAR=1 offset=00e0
>	Kernel driver in use: ehci_hcd
>
>00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
>	Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR- INTx-
>	Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
>	Kernel driver in use: piix4_smbus
>	Kernel modules: i2c-piix4
>
>00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if 8a [Master SecP PriP])
>	Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Interrupt: pin A routed to IRQ 16
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at ff00 [size=16]
>	Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Count=1/2 Enable-
>		Address: 00000000  Data: 0000
>	Kernel driver in use: pata_atiixp
>	Kernel modules: ata_generic, pata_atiixp, pata_acpi
>
>00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
>	Subsystem: ASUSTeK Computer Inc. Device 19d3
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin ? routed to IRQ 16
>	Region 0: Memory at fdaf4000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>
>00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
>	Subsystem: ASUSTeK Computer Inc. Device 11e7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Bus: primary=00, secondary=08, subordinate=08, sec-latency=64
>	Memory behind bridge: feb00000-febfffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h HyperTransport Configuration (rev 40)
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Capabilities: [80] HyperTransport: Host or Secondary Interface
>		Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
>		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>		Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>		Revision ID: 3.00
>		Link Frequency: [a]
>		Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
>		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
>
>00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Address Map
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h DRAM Controller
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Miscellaneous Control
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Capabilities: [f0] Secure device <?>
>
>00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Link Control
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] (prog-if 00 [VGA controller])
>	Subsystem: ASUSTeK Computer Inc. Device 1062
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 18
>	Region 0: Memory at b0000000 (32-bit, prefetchable) [size=256M]
>	Region 1: I/O ports at b000 [size=256]
>	Region 2: Memory at fdcf0000 (32-bit, non-prefetchable) [size=64K]
>	Region 5: Memory at fdb00000 (32-bit, non-prefetchable) [size=1M]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
>		Address: 0000000000000000  Data: 0000
>
>02:00.0 VGA compatible controller: ATI Technologies Inc Mobilitiy Radeon HD 3650 (prog-if 00 [VGA controller])
>	Subsystem: ASUSTeK Computer Inc. Device 1872
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 18
>	Region 0: Memory at c0000000 (32-bit, prefetchable) [disabled] [size=512M]
>	Region 1: I/O ports at c000 [disabled] [size=256]
>	Region 2: Memory at fddf0000 (32-bit, non-prefetchable) [disabled] [size=64K]
>	Expansion ROM at fddc0000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -3.5dB
>	Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [100] Vendor Specific Information <?>
>
>02:00.1 Audio device: ATI Technologies Inc RV635 Audio device [Radeon HD 3600 Series]
>	Subsystem: ATI Technologies Inc RV635 Audio device [Radeon HD 3600 Series]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 19
>	Region 0: Memory at fddec000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -3.5dB
>	Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [100] Vendor Specific Information <?>
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>
>03:00.0 Network controller: Atheros Communications Inc. Device 002a (rev 01)
>	Subsystem: Device 1a3b:1067
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fdef0000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
>			ClockPM- Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
>		Vector table: BAR=0 offset=00000000
>		PBA: BAR=0 offset=00000000
>	Capabilities: [100] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
>		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		AERCap:	First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
>	Capabilities: [140] Virtual Channel <?>
>	Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
>	Kernel driver in use: ath9k
>	Kernel modules: ath9k
>
>04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
>	Subsystem: ASUSTeK Computer Inc. Device 16d5
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: I/O ports at d800 [size=256]
>	Region 2: Memory at f9fff000 (64-bit, prefetchable) [size=4K]
>	Region 4: Memory at f9fe0000 (64-bit, prefetchable) [size=64K]
>	Expansion ROM at fdff0000 [disabled] [size=64K]
>	Capabilities: [40] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/2 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [70] Express (v1) Endpoint, MSI 01
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <8us
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
>			ClockPM+ Suprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
>		Vector table: BAR=4 offset=00000000
>		PBA: BAR=4 offset=00000800
>	Capabilities: [d0] Vital Product Data <?>
>	Capabilities: [100] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
>		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>	Capabilities: [140] Virtual Channel <?>
>	Capabilities: [160] Device Serial Number 00-e0-4c-68-44-65-00-13
>	Kernel driver in use: r8169
>	Kernel modules: r8169
>
>08:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 1877
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME+
>	Kernel driver in use: firewire_ohci
>	Kernel modules: firewire-ohci
>
>08:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
>	Subsystem: ASUSTeK Computer Inc. Device 1877
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 21
>	Region 0: Memory at febff400 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: sdhci-pci
>	Kernel modules: sdhci-pci
>
>08:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
>	Subsystem: ASUSTeK Computer Inc. Device 1877
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 21
>	Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: ricoh-mmc
>	Kernel modules: ricoh_mmc
>
>08:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
>	Subsystem: ASUSTeK Computer Inc. Device 1877
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 21
>	Region 0: Memory at febfec00 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>08:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
>	!!! Unknown header type 7f
>

Actions: View

Attachments on bug 462637: 262500 | 262501 | 262502 | 265698 | 265701 | 274292 | 329718