Attachment 265551 Details for Bug 457125

boot.msg from netinstall image

boot.msg (text/plain), 26.63 KB, created by Tejun Heo on 2009-01-16 07:57:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tejun Heo

Created: 2009-01-16 07:57:53 UTC

Size: 26.63 KB

patch

obsolete

><6>Initializing cgroup subsys cpuset
><6>Initializing cgroup subsys cpu
><5>Linux version 2.6.27.7-9-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
><6>PAT WC disabled due to known CPU erratum.
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><6> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 000000007ff40000 (usable)
><6> BIOS-e820: 000000007ff40000 - 000000007ff50000 (ACPI data)
><6> BIOS-e820: 000000007ff50000 - 0000000080000000 (ACPI NVS)
><6>DMI 2.3 present.
><5>AMI BIOS detected: BIOS may corrupt low RAM, working it around.
><6>last_pfn = 0x7ff40 max_arch_pfn = 0x100000
><7>kernel direct mapping tables up to 38000000 @ 10000-15000
><6>RAMDISK: 7e9df000 - 7ff0f357
><6>Allocated new RAMDISK: 00654000 - 01b84357
><6>Move RAMDISK from 000000007e9df000 - 000000007ff0f356 to 00654000 - 01b84356
><4>ACPI: RSDP 000F5DE0, 0014 (r0 ACPIAM)
><4>ACPI: RSDT 7FF40000, 002C (r1 A M I  OEMRSDT   8000526 MSFT       97)
><4>ACPI: FACP 7FF40200, 0081 (r1 A M I  OEMFACP   8000526 MSFT       97)
><4>ACPI: DSDT 7FF40400, 6653 (r1  1ABSP 1ABSP001        1 MSFT  2000001)
><4>ACPI: FACS 7FF50000, 0040
><4>ACPI: OEMB 7FF50040, 0053 (r1 A M I  OEMBIOS   8000526 MSFT       97)
><5>1151MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>  mapped low ram: 0 - 38000000
><6>  low ram: 00000000 - 38000000
><6>  bootmap 00012000 - 00019000
><6>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
><6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
><6>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
><6>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
><6>  #3 [0000100000 - 00006509dc]    TEXT DATA BSS ==> [0000100000 - 00006509dc]
><6>  #4 [0000651000 - 0000654000]    INIT_PG_TABLE ==> [0000651000 - 0000654000]
><6>  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
><6>  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
><6>  #7 [0000654000 - 0001b84357]      NEW RAMDISK ==> [0000654000 - 0001b84357]
><6>  #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
><4>Zone PFN ranges:
><4>  DMA      0x00000010 -> 0x00001000
><4>  Normal   0x00001000 -> 0x00038000
><4>  HighMem  0x00038000 -> 0x0007ff40
><4>Movable zone start PFN for each node
><4>early_node_map[2] active PFN ranges
><4>    0: 0x00000010 -> 0x0000009f
><4>    0: 0x00000100 -> 0x0007ff40
><7>On node 0 totalpages: 523983
><7>free_area_init_node: node 0, pgdat c051ee00, node_mem_map c1b85240
><7>  DMA zone: 3947 pages, LIFO batch:0
><7>  Normal zone: 223300 pages, LIFO batch:31
><7>  HighMem zone: 292129 pages, LIFO batch:31
><6>Using APIC driver default
><6>ACPI: PM-Timer IO Port: 0x408
><6>SMP: Allowing 1 CPUs, 0 hotplug CPUs
><6>Found and enabled local APIC!
><7>mapped APIC to ffffb000 (fee00000)
><6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
><6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
><6>Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
><6>PERCPU: Allocating 39068 bytes of per cpu data
><7>NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
><4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519376
><5>Kernel command line: BOOT_IMAGE=linux initrd=initrd,10240768.spl splash=silent vga=0x317 install=http://download.opensuse.org/distribution/11.1/repo/oss
><6>bootsplash: silent mode.
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 16384 bytes)
><6>TSC: PIT calibration confirmed by PMTIMER.
><6>TSC: using PMTIMER calibration value
><4>Detected 2000.069 MHz processor.
><4>Console: colour dummy device 80x25
><6>console [tty0] enabled
><6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 2048680k/2096384k available (2342k kernel code, 46484k reserved, 1960k data, 316k init, 1178880k highmem)
><6>virtual kernel memory layout:
><6>    fixmap  : 0xffdf6000 - 0xfffff000   (2084 kB)
><6>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
><6>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
><6>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
><6>      .init : 0xc053a000 - 0xc0589000   ( 316 kB)
><6>      .data : 0xc034988b - 0xc0533a90   (1960 kB)
><6>      .text : 0xc0100000 - 0xc034988b   (2342 kB)
><6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
><7>CPA: page pool initialized 1 of 1 pages preallocated
><6>Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.13 BogoMIPS (lpj=8000276)
><4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
><6>Security Framework initialized
><6>SELinux:  Disabled at boot.
><6>AppArmor: AppArmor initialized
><4>Mount-cache hash table entries: 512
><6>Initializing cgroup subsys ns
><6>Initializing cgroup subsys cpuacct
><6>Initializing cgroup subsys memory
><6>Initializing cgroup subsys devices
><6>Initializing cgroup subsys freezer
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 2048K
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 12k freed
><6>ACPI: Core revision 20080609
><6>ACPI: Checking initramfs for custom DSDT
><4>Parsing all Control Methods:
><4>Table [DSDT](id 0001) - 954 Objects with 56 Devices 260 Methods 28 Regions
><4> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
><4>ACPI: setting ELCR to 0200 (from 0ea0)
><4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
><4>weird, boot CPU (#0) not listedby the BIOS.
><5>SMP motherboard not detected.
><6>SMP disabled
><6>Brought up 1 CPUs
><6>Total of 1 processors activated (4000.13 BogoMIPS).
><7>CPU0 attaching NULL sched-domain.
><6>net_namespace: 1044 bytes
><6>Booting paravirtualized kernel on bare hardware
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
><6>PCI: Using configuration type 1 for base access
><4>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><7>ACPI: EC: Look up EC in DSDT
><4>Completing Region/Field/Buffer/Package initialization:................................................................................................................................
><4>Initialized 26/28 Regions 34/35 Fields 43/44 Buffers 25/25 Packages (963 nodes)
><4>Initializing Device/Processor/Thermal objects by executing _INI methods:...<6>ACPI: EC: non-query interrupt received, switching to interrupt mode
><4>.
><4>Executed 4 _INI methods requiring 0 _STA executions (examined 60 objects)
><4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 8 Runtime GPEs in this block
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using PIC for interrupt routing
><6>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
><6>ACPI: EC: driver started in interrupt mode
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: 0000:00:00.0 reg 10 32bit mmio: [f0000000, f7ffffff]
><7>PCI: 0000:00:1d.0 reg 20 io port: [e800, e81f]
><7>PCI: 0000:00:1d.1 reg 20 io port: [e880, e89f]
><7>PCI: 0000:00:1d.2 reg 20 io port: [ec00, ec1f]
><7>PCI: 0000:00:1d.7 reg 10 32bit mmio: [ffaffc00, ffafffff]
><6>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:1d.7: PME# disabled
><6>HPET not enabled in BIOS. You might try hpet=force boot option
><6>pci 0000:00:1f.0: Enabled i801 SMBus device
><6>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
><6>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
><7>PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
><7>PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
><7>PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
><7>PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
><7>PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf]
><7>PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
><7>PCI: 0000:00:1f.3 reg 20 io port: [540, 55f]
><7>PCI: 0000:00:1f.5 reg 10 io port: [e400, e4ff]
><7>PCI: 0000:00:1f.5 reg 14 io port: [e080, e0bf]
><7>PCI: 0000:00:1f.5 reg 18 32bit mmio: [ffaff800, ffaff9ff]
><7>PCI: 0000:00:1f.5 reg 1c 32bit mmio: [ffaff400, ffaff4ff]
><6>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:1f.5: PME# disabled
><7>PCI: 0000:01:00.0 reg 10 32bit mmio: [e0000000, e7ffffff]
><7>PCI: 0000:01:00.0 reg 14 io port: [c800, c8ff]
><7>PCI: 0000:01:00.0 reg 18 32bit mmio: [ff8f0000, ff8fffff]
><7>PCI: 0000:01:00.0 reg 30 32bit mmio: [ff8c0000, ff8dffff]
><7>pci 0000:01:00.0: supports D1
><7>pci 0000:01:00.0: supports D2
><7>PCI: bridge 0000:00:01.0 io port: [c000, cfff]
><7>PCI: bridge 0000:00:01.0 32bit mmio: [ff800000, ff8fffff]
><7>PCI: bridge 0000:00:01.0 32bit mmio pref: [de900000, ee9fffff]
><7>PCI: 0000:02:00.0 reg 10 32bit mmio: [ff9fc000, ff9fffff]
><7>PCI: 0000:02:00.0 reg 14 io port: [d800, d8ff]
><7>PCI: 0000:02:00.0 reg 30 32bit mmio: [ff9c0000, ff9dffff]
><7>pci 0000:02:00.0: supports D1
><7>pci 0000:02:00.0: supports D2
><6>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:02:00.0: PME# disabled
><7>PCI: 0000:02:01.0 reg 10 32bit mmio: [0, fff]
><7>pci 0000:02:01.0: supports D1
><7>pci 0000:02:01.0: supports D2
><6>pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:02:01.0: PME# disabled
><7>PCI: 0000:02:01.1 reg 10 32bit mmio: [ff9fb000, ff9fb7ff]
><6>pci 0000:02:01.1: PME# supported from D0 D3hot D3cold
><6>pci 0000:02:01.1: PME# disabled
><7>PCI: 0000:02:01.2 reg 10 32bit mmio: [ff9fb800, ff9fb8ff]
><7>pci 0000:02:01.2: supports D1
><7>pci 0000:02:01.2: supports D2
><6>pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:02:01.2: PME# disabled
><7>PCI: 0000:02:01.3 reg 10 32bit mmio: [ff9fbc00, ff9fbcff]
><7>pci 0000:02:01.3: supports D1
><7>pci 0000:02:01.3: supports D2
><6>pci 0000:02:01.3: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:02:01.3: PME# disabled
><7>PCI: 0000:02:02.0 reg 10 32bit mmio: [ff9fa000, ff9fafff]
><6>pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
><6>pci 0000:02:02.0: PME# disabled
><6>pci 0000:00:1e.0: transparent bridge
><7>PCI: bridge 0000:00:1e.0 io port: [d000, dfff]
><7>PCI: bridge 0000:00:1e.0 32bit mmio: [ff900000, ff9fffff]
><7>PCI: bridge 0000:00:1e.0 32bit mmio pref: [eea00000, eeafffff]
><7>bus 00 -> node 0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 11 12)
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10)
><6>ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 13 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>PnPBIOS: Disabled by ACPI PNP
><6>PCI: Using ACPI for IRQ routing
><6>AppArmor: AppArmor Filesystem Enabled
><4>ACPI: RTC can wake from S4
><6>system 00:07: ioport range 0xa00-0xa0f has been reserved
><6>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
><6>system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
><6>system 00:0b: ioport range 0x540-0x55f has been reserved
><6>system 00:0b: ioport range 0x400-0x47f has been reserved
><6>system 00:0b: ioport range 0x500-0x53f has been reserved
><6>system 00:0b: ioport range 0x4c0-0x4cf has been reserved
><6>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
><6>system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
><6>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
><6>system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
><6>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
><6>system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
><6>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
><6>pci 0000:00:01.0:   IO window: 0xc000-0xcfff
><6>pci 0000:00:01.0:   MEM window: 0xff800000-0xff8fffff
><6>pci 0000:00:01.0:   PREFETCH window: 0x000000de900000-0x000000ee9fffff
><6>pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03
><6>pci 0000:02:01.0:   IO window: 0x00d000-0x00d0ff
><6>pci 0000:02:01.0:   IO window: 0x00d400-0x00d4ff
><6>pci 0000:02:01.0:   PREFETCH window: 0x8c000000-0x8fffffff
><6>pci 0000:02:01.0:   MEM window: 0x90000000-0x93ffffff
><6>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
><6>pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
><6>pci 0000:00:1e.0:   MEM window: 0xff900000-0xff9fffff
><6>pci 0000:00:1e.0:   PREFETCH window: 0x000000eea00000-0x000000eeafffff
><7>pci 0000:00:1e.0: setting latency timer to 64
><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
><6>vendor=8086 device=2448
><7>PCI: setting IRQ 7 as level-triggered
><6>pci 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
><7>pci 0000:02:01.0: setting latency timer to 64
><6>bus: 00 index 0 io port: [0, ffff]
><6>bus: 00 index 1 mmio: [0, ffffffff]
><6>bus: 01 index 0 io port: [c000, cfff]
><6>bus: 01 index 1 mmio: [ff800000, ff8fffff]
><6>bus: 01 index 2 mmio: [de900000, ee9fffff]
><6>bus: 01 index 3 mmio: [0, 0]
><6>bus: 02 index 0 io port: [d000, dfff]
><6>bus: 02 index 1 mmio: [ff900000, ff9fffff]
><6>bus: 02 index 2 mmio: [eea00000, eeafffff]
><6>bus: 02 index 3 io port: [0, ffff]
><6>bus: 02 index 4 mmio: [0, ffffffff]
><6>bus: 03 index 0 io port: [d000, d0ff]
><6>bus: 03 index 1 io port: [d400, d4ff]
><6>bus: 03 index 2 mmio: [8c000000, 8fffffff]
><6>bus: 03 index 3 mmio: [90000000, 93ffffff]
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
><6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><6>Unpacking initramfs...<7>Switched to high resolution mode on CPU 0
><4> done
><6>Freeing initrd memory: 21696k freed
><6>Machine check exception polling timer started.
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1231944722.064:1): initialized
><4>highmem bounce pool size: 64 pages
><6>HugeTLB registered 4 MB page size, pre-allocated 0 pages
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>msgmni has been set to 435
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>pci 0000:01:00.0: Boot video device
><6>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total 65536k
><6>vesafb: mode is 1024x768x16, linelength=2048, pages=41
><6>vesafb: protected mode interface info at c000:56e3
><6>vesafb: pmi: set display start = c00c5751, set palette = c00c578b
><6>vesafb: pmi: ports = c810 c816 c854 c838 c83c c85c c800 c804 c8b0 c8b2 c8b4 
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...
><6>bootsplash: silentjpeg size 100719 bytes
><6>bootsplash: ...found (1024x768, 38691 bytes, v3).
><4>Console: switching to colour frame buffer device 124x44
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Serial: 8250/16550 driver8 ports, IRQ sharing enabled
><6>PNP: PS/2 Controller [PNP030b:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
><6>i8042.c: Detected active multiplexing controller, rev 1.1.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>TCP cubic registered
><4>Using IPI No-Shortcut mode
><4>registered taskstats version 1
><6>Freeing unused kernel memory: 316k freed
><6>Write protecting the kernel text: 2344k
><6>Write protecting the kernel read-only data: 1768k
><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
><6>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
><6>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
><6>udevd version 128 started
><3>ACPI: Invalid PBLK length [7]
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><6>processor ACPI_CPU:00: registered as cooling_device0
><6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
><6>ACPI: Power Button (FF) [PWRF]
><6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
><6>ACPI: Lid Switch [LID]
><6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
><6>ACPI: Sleep Button (CM) [SLPB]
><6>ACPI: AC Adapter [AC] (on-line)
><6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
><6>ACPI: Power Button (CM) [PWRB]
><6>thermal LNXTHERM:01: registered as thermal_zone0
><6>ACPI: Thermal Zone [THRM] (82 C)
><6>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/device:10/input/input6
><6>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
><6>Linux agpgart interface v0.103
><6>agpgart-intel 0000:00:00.0: Intel 855PM Chipset
><6>agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>ACPI: Battery Slot [BAT0] (battery present)
><6>ACPI: Battery Slot [BAT1] (battery absent)
><6>USB Universal Host Controller Interface driver v3.0
><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
><7>PCI: setting IRQ 11 as level-triggered
><6>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
><7>uhci_hcd 0000:00:1d.0: setting latency timer to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e800
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: UHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
><6>usb usb1: SerialNumber: 0000:00:1d.0
><4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
><7>PCI: setting IRQ 5 as level-triggered
><6>uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
><7>uhci_hcd 0000:00:1d.1: setting latency timer to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e880
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: UHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.1
><4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
><7>PCI: setting IRQ 9 as level-triggered
><6>uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
><7>uhci_hcd 0000:00:1d.2: setting latency timer to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000ec00
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.27.7-9-default uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1d.2
><4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
><7>PCI: setting IRQ 10 as level-triggered
><6>ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
><7>ehci_hcd 0000:00:1d.7: setting latency timer to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
><6>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffaffc00
><6>usb 2-1: new full speed USB device using uhci_hcd and address 2
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 6 ports detected
><6>ACPI: ACPI Dock Station Driver: 1 docks/bays found
><5>SCSI subsystem initialized
><3>hub 2-0:1.0: unable to enumerate USB device on port 1
><7>libata version 3.00 loaded.
><6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: EHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.27.7-9-default ehci_hcd
><6>usb usb4: SerialNumber: 0000:00:1d.7
><6>vendor=8086 device=2448
><6>skge 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
><6>skge 1.13 addr 0xff9fc000 irq 9 chip Yukon-Lite rev 9
><6>skge eth0: addr 00:11:d8:8b:2e:33
><6>Yenta: CardBus bridge found at 0000:02:01.0 [1043:1987]
><6>usb 4-3: new high speed USB device using ehci_hcd and address 2
><6>Yenta: ISA IRQ mask 0x0018, PCI irq 7
><6>Socket status: 30000006
><6>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
><6>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
><6>cs: IO port probe 0xd000-0xdfff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xff900000 - 0xff9fffff
><6>pcmcia: parent PCI bridge Memory window: 0xeea00000 - 0xeeafffff
><6>vendor=8086 device=2448
><6>ohci1394 0000:02:01.1: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
><6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[ff9fb000-ff9fb7ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
><6>usb 4-3: configuration #1 chosen from 1 choice
><6>usb 4-3: New USB device found, idVendor=0781, idProduct=5406
><6>usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 4-3: Product: U3 Cruzer Micro
><6>usb 4-3: Manufacturer: SanDisk
><6>usb 4-3: SerialNumber: 3411421663C0C9FF
><7>ata_piix 0000:00:1f.1: version 2.12
><6>ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
><6>ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
><7>ata_piix 0000:00:1f.1: setting latency timer to 64
><6>scsi0 : ata_piix
><6>scsi1 : ata_piix
><6>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
><6>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
><6>ata1: clearing spurious IRQ
><6>ata1.00: ATA-7: Hitachi HTS541616J9AT00, SB4OA70H, max UDMA/100
><6>ata1.00: 312581808 sectors, multi 16: LBA48 
><6>ata1: clearing spurious IRQ
><6>ata1: clearing spurious IRQ
><6>ata1.00: configured for UDMA/100
><6>ata2: clearing spurious IRQ
><6>ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L532A, TI51, max UDMA/33
><6>ata2: clearing spurious IRQ
><6>ata2: clearing spurious IRQ
><6>ata2.00: configured for UDMA/33
><5>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
><5>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L532A TI51 PQ: 0 ANSI: 5
><6>Uniform Multi-Platform E-IDE driver
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800032a2cd9]
><6>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one month
><4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 1:0:0:0: Attached scsi CD-ROM sr0
><5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160GB/149GiB)
><5>sd 0:0:0:0: [sda] Write Protect is off
><7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2 sda3 sda4
><5>sd 0:0:0:0: [sda] Attached SCSI disk
><6>st: Version 20080504, fixed bufsize 32768, s/g segs 256
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>sr 1:0:0:0: Attached scsi generic sg1 type 5
><6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
><6>Non-volatile memory driver v1.2
><6>NET: Registered protocol family 17
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>RPC: Registered udp transport module.
><6>RPC: Registered tcp transport module.
><6>loop: module loaded
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>usbhid: v2.6:USB HID core driver
><6>Initializing USB Mass Storage driver...
><6>scsi2 : SCSI emulation for USB Mass Storage devices
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><5>scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer           7.01 PQ: 0 ANSI: 0 CCS
><5>sd 2:0:0:0: [sdb] 31306239 512-byte hardware sectors: (16.0GB/14.9GiB)
><5>sd 2:0:0:0: [sdb] Write Protect is off
><7>sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
><3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
><5>sd 2:0:0:0: [sdb] 31306239 512-byte hardware sectors: (16.0GB/14.9GiB)
><5>sd 2:0:0:0: [sdb] Write Protect is off
><7>sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
><3>sd 2:0:0:0: [sdb] Assuming drive cache: write through
><6> sdb: sdb1
><5>sd 2:0:0:0: [sdb] Attached SCSI removable disk
><5>sd 2:0:0:0: Attached scsi generic sg2 type 0
><5>scsi 2:0:0:1: CD-ROM            SanDisk  Cruzer           7.01 PQ: 0 ANSI: 0
><4>sr1: scsi3-mmc drive: 48x/48x tray
><7>sr 2:0:0:1: Attached scsi CD-ROM sr1
><5>sr 2:0:0:1: Attached scsi generic sg3 type 5
><7>usb-storage: device scan complete
><6>skge eth0: enabling interface
><6>ADDRCONF(NETDEV_UP): eth0: link is not ready
><6>skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
><6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
><6>squashfs: version 3.4 (2008/08/26) Phillip Lougher

Actions: View

Attachments on bug 457125: 258507 | 265551 | 265552 | 265553