Attachment 265698 Details for Bug 462637

dmesg from successful boot with patched kernel

dmesg-acpi.txt (text/plain), 44.19 KB, created by Vadim Plessky on 2009-01-16 16:19:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Vadim Plessky

Created: 2009-01-16 16:19:06 UTC

Size: 44.19 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27.10-1.2-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-01-09 18:17:50 +0100
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000aff78000 (usable)
> BIOS-e820: 00000000aff78000 - 00000000aff80000 (ACPI NVS)
> BIOS-e820: 00000000aff80000 - 00000000aff8e000 (ACPI data)
> BIOS-e820: 00000000aff8e000 - 00000000affe0000 (ACPI NVS)
> BIOS-e820: 00000000affe0000 - 00000000affee000 (reserved)
> BIOS-e820: 00000000afff0000 - 00000000b0000000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working it around.
>last_pfn = 0xaff78 max_arch_pfn = 0x100000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>kernel direct mapping tables up to 38000000 @ 10000-15000
>RAMDISK: 379ae000 - 37fef1fb
>ACPI: RSDP 000FA3C0, 0014 (r0 ACPIAM)
>ACPI: RSDT AFF80000, 004C (r1 _ASUS_ Notebook 20080909 MSFT       97)
>ACPI: FACP AFF80200, 0084 (r2 090908 FACP1039 20080909 MSFT       97)
>ACPI: DSDT AFF80680, BC7E (r1  M51Ta M51Ta001        1 INTL 20051117)
>ACPI: FACS AFF8E000, 0040
>ACPI: APIC AFF80390, 005C (r1 090908 APIC1039 20080909 MSFT       97)
>ACPI: MCFG AFF80430, 003C (r1 090908 OEMMCFG  20080909 MSFT       97)
>ACPI: SLIC AFF80470, 0176 (r1 _ASUS_ Notebook 20080909 MSFT       97)
>ACPI: ECDT AFF80620, 0055 (r1 090908 OEMECDT  20080909 MSFT       97)
>ACPI: DBGP AFF803F0, 0034 (r1 090908 DBGP1039 20080909 MSFT       97)
>ACPI: BOOT AFF805F0, 0028 (r1 090908 BOOT1039 20080909 MSFT       97)
>ACPI: OEMB AFF8E040, 0071 (r1 090908 OEMB1039 20080909 MSFT       97)
>ACPI: HPET AFF8C300, 0038 (r1 090908 OEMHPET  20080909 MSFT       97)
>ACPI: SSDT AFF8C340, 0386 (r1 AMI    POWERNOW        1 AMD         1)
>ACPI: Local APIC address 0xfee00000
>1919MB HIGHMEM available.
>896MB LOWMEM available.
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 00012000 - 00019000
>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000100000 - 000065ca5c]    TEXT DATA BSS ==> [0000100000 - 000065ca5c]
>  #4 [00379ae000 - 0037fef1fb]          RAMDISK ==> [00379ae000 - 0037fef1fb]
>  #5 [000065d000 - 0000660000]    INIT_PG_TABLE ==> [000065d000 - 0000660000]
>  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #7 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
>  #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
>found SMP MP-table at [c00ff780] 000ff780
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x000aff78
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000aff78
>On node 0 totalpages: 720647
>free_area_init_node: node 0, pgdat c052a100, node_mem_map c1000240
>  DMA zone: 3947 pages, LIFO batch:0
>  Normal zone: 223300 pages, LIFO batch:31
>  HighMem zone: 487065 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8300 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at b8000000 (gap: b0000000:4f700000)
>PERCPU: Allocating 39452 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 714312
>Kernel command line: root=/dev/system/root resume=/dev/system/swap splash=silent disable_mtrr_save vga=0x317
>bootsplash: silent mode.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 2300.062 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2843528k/2883040k available (2375k kernel code, 38192k reserved, 1976k data, 316k init, 1965536k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffdf6000 - 0xfffff000   (2084 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0546000 - 0xc0595000   ( 316 kB)
>      .data : 0xc0351cfb - 0xc053fd10   (1976 kB)
>      .text : 0xc0100000 - 0xc0351cfb   (2375 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4600.12 BogoMIPS (lpj=9200248)
>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
>Security Framework initialized
>AppArmor: AppArmor initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Core 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using C1E aware idle routine
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080609
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 1656 Objects with 77 Devices 536 Methods 64 Regions
>Parsing all Control Methods:
>Table [SSDT](id 0002) - 10 Objects with 0 Devices 0 Methods 0 Regions
> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-84 stepping 01
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4590.44 BogoMIPS (lpj=9180883)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Core 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-84 stepping 01
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 253353746 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (9190.56 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 1 0
>net_namespace: 1044 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
>PCI: Using configuration type 1 for base access
>PCI: Using configuration type 1 for extended access
>perfmon: version 2.82
>perfmon: CPU hotplug support enabled
>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>ACPI: EC: EC description table is found, configuring boot EC
>Completing Region/Field/Buffer/Package initialization:....................................................................................................................................................................
>Initialized 64/64 Regions 17/17 Fields 37/37 Buffers 46/46 Packages (1675 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>......
>Executed 6 _INI methods requiring 0 _STA executions (examined 82 objects)
>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 3 Runtime GPEs in this block
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: EC: GPE = 0xe, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:06.0: PME# disabled
>PCI: 0000:00:11.0 reg 10 io port: [a000, a007]
>PCI: 0000:00:11.0 reg 14 io port: [9000, 9003]
>PCI: 0000:00:11.0 reg 18 io port: [8000, 8007]
>PCI: 0000:00:11.0 reg 1c io port: [7000, 7003]
>PCI: 0000:00:11.0 reg 20 io port: [6000, 600f]
>PCI: 0000:00:11.0 reg 24 32bit mmio: [fdaff800, fdaffbff]
>PCI: 0000:00:12.0 reg 10 32bit mmio: [fdafe000, fdafefff]
>PCI: 0000:00:12.1 reg 10 32bit mmio: [fdafd000, fdafdfff]
>PCI: 0000:00:12.2 reg 10 32bit mmio: [fdaff000, fdaff0ff]
>pci 0000:00:12.2: supports D1
>pci 0000:00:12.2: supports D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:12.2: PME# disabled
>PCI: 0000:00:13.0 reg 10 32bit mmio: [fdafc000, fdafcfff]
>PCI: 0000:00:13.1 reg 10 32bit mmio: [fdafb000, fdafbfff]
>PCI: 0000:00:13.2 reg 10 32bit mmio: [fdafa800, fdafa8ff]
>pci 0000:00:13.2: supports D1
>pci 0000:00:13.2: supports D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>disabled boot interrupts on PCI device 0x1002:0x4385
>PCI: 0000:00:14.1 reg 10 io port: [0, 7]
>PCI: 0000:00:14.1 reg 14 io port: [0, 3]
>PCI: 0000:00:14.1 reg 18 io port: [0, 7]
>PCI: 0000:00:14.1 reg 1c io port: [0, 3]
>PCI: 0000:00:14.1 reg 20 io port: [ff00, ff0f]
>PCI: 0000:00:14.2 reg 10 64bit mmio: [fdaf4000, fdaf7fff]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>PCI: 0000:01:05.0 reg 10 32bit mmio: [b0000000, bfffffff]
>PCI: 0000:01:05.0 reg 14 io port: [b000, b0ff]
>PCI: 0000:01:05.0 reg 18 32bit mmio: [fdcf0000, fdcfffff]
>PCI: 0000:01:05.0 reg 24 32bit mmio: [fdb00000, fdbfffff]
>pci 0000:01:05.0: supports D1
>pci 0000:01:05.0: supports D2
>PCI: bridge 0000:00:01.0 io port: [b000, bfff]
>PCI: bridge 0000:00:01.0 32bit mmio: [fdb00000, fdcfffff]
>PCI: bridge 0000:00:01.0 64bit mmio pref: [b0000000, bfffffff]
>PCI: 0000:02:00.0 reg 10 32bit mmio: [c0000000, dfffffff]
>PCI: 0000:02:00.0 reg 14 io port: [c000, c0ff]
>PCI: 0000:02:00.0 reg 18 32bit mmio: [fddf0000, fddfffff]
>PCI: 0000:02:00.0 reg 30 32bit mmio: [fddc0000, fdddffff]
>pci 0000:02:00.0: supports D1
>pci 0000:02:00.0: supports D2
>PCI: 0000:02:00.1 reg 10 32bit mmio: [fddec000, fddeffff]
>pci 0000:02:00.1: supports D1
>pci 0000:02:00.1: supports D2
>PCI: bridge 0000:00:02.0 io port: [c000, cfff]
>PCI: bridge 0000:00:02.0 32bit mmio: [fdd00000, fddfffff]
>PCI: bridge 0000:00:02.0 64bit mmio pref: [c0000000, dfffffff]
>PCI: 0000:03:00.0 reg 10 64bit mmio: [fdef0000, fdefffff]
>pci 0000:03:00.0: supports D1
>pci 0000:03:00.0: PME# supported from D0 D1 D3hot
>pci 0000:03:00.0: PME# disabled
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:04.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:04.0 32bit mmio: [fde00000, fdefffff]
>PCI: 0000:04:00.0 reg 10 io port: [d800, d8ff]
>PCI: 0000:04:00.0 reg 18 64bit mmio: [f9fff000, f9ffffff]
>PCI: 0000:04:00.0 reg 20 64bit mmio: [f9fe0000, f9feffff]
>PCI: 0000:04:00.0 reg 30 32bit mmio: [fdff0000, fdffffff]
>pci 0000:04:00.0: supports D1
>pci 0000:04:00.0: supports D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>PCI: bridge 0000:00:05.0 io port: [d000, dfff]
>PCI: bridge 0000:00:05.0 32bit mmio: [fdf00000, fdffffff]
>PCI: bridge 0000:00:05.0 64bit mmio pref: [f9f00000, f9ffffff]
>PCI: bridge 0000:00:06.0 io port: [e000, efff]
>PCI: bridge 0000:00:06.0 32bit mmio: [fe000000, feafffff]
>PCI: bridge 0000:00:06.0 64bit mmio pref: [fa000000, fcffffff]
>PCI: 0000:08:01.0 reg 10 32bit mmio: [febff800, febfffff]
>pci 0000:08:01.0: supports D1
>pci 0000:08:01.0: supports D2
>pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:08:01.0: PME# disabled
>PCI: 0000:08:01.1 reg 10 32bit mmio: [febff400, febff4ff]
>pci 0000:08:01.1: supports D1
>pci 0000:08:01.1: supports D2
>pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:08:01.1: PME# disabled
>PCI: 0000:08:01.2 reg 10 32bit mmio: [febff000, febff0ff]
>pci 0000:08:01.2: supports D1
>pci 0000:08:01.2: supports D2
>pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:08:01.2: PME# disabled
>PCI: 0000:08:01.3 reg 10 32bit mmio: [febfec00, febfecff]
>pci 0000:08:01.3: supports D1
>pci 0000:08:01.3: supports D2
>pci 0000:08:01.3: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:08:01.3: PME# disabled
>PCI: 0000:08:01.4 reg 10 32bit mmio: [febfe800, febfe8ff]
>pci 0000:08:01.4: supports D1
>pci 0000:08:01.4: supports D2
>pci 0000:08:01.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:08:01.4: PME# disabled
>pci 0000:00:14.4: transparent bridge
>PCI: bridge 0000:00:14.4 32bit mmio: [feb00000, febfffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 12 14 15) *0
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>AppArmor: AppArmor Filesystem Enabled
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>system 00:07: ioport range 0x250-0x253 has been reserved
>system 00:07: ioport range 0x256-0x25f has been reserved
>system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x40b-0x40b has been reserved
>system 00:08: ioport range 0x4d6-0x4d6 has been reserved
>system 00:08: ioport range 0xc00-0xc01 has been reserved
>system 00:08: ioport range 0xc14-0xc14 has been reserved
>system 00:08: ioport range 0xc50-0xc51 has been reserved
>system 00:08: ioport range 0xc52-0xc52 has been reserved
>system 00:08: ioport range 0xc6c-0xc6c has been reserved
>system 00:08: ioport range 0xc6f-0xc6f has been reserved
>system 00:08: ioport range 0xcd0-0xcd1 has been reserved
>system 00:08: ioport range 0xcd2-0xcd3 has been reserved
>system 00:08: ioport range 0xcd4-0xcd5 has been reserved
>system 00:08: ioport range 0xcd6-0xcd7 has been reserved
>system 00:08: ioport range 0xcd8-0xcdf has been reserved
>system 00:08: ioport range 0x800-0x89f has been reserved
>system 00:08: ioport range 0xb00-0xb0f has been reserved
>system 00:08: ioport range 0xb20-0xb3f has been reserved
>system 00:08: ioport range 0x900-0x90f has been reserved
>system 00:08: ioport range 0x910-0x91f has been reserved
>system 00:08: ioport range 0xfe00-0xfefe has been reserved
>system 00:08: iomem range 0xffb80000-0xffbfffff could not be reserved
>system 00:08: iomem range 0xfec10000-0xfec1001f has been reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0c: iomem range 0x100000-0xafffffff could not be reserved
>system 00:0c: iomem range 0xe0000000-0xffffffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xb000-0xbfff
>pci 0000:00:01.0:   MEM window: 0xfdb00000-0xfdcfffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000b0000000-0x000000bfffffff
>pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:02.0:   IO window: 0xc000-0xcfff
>pci 0000:00:02.0:   MEM window: 0xfdd00000-0xfddfffff
>pci 0000:00:02.0:   PREFETCH window: 0x000000c0000000-0x000000dfffffff
>pci 0000:00:04.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:04.0:   IO window: disabled
>pci 0000:00:04.0:   MEM window: 0xfde00000-0xfdefffff
>pci 0000:00:04.0:   PREFETCH window: disabled
>pci 0000:00:05.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:05.0:   IO window: 0xd000-0xdfff
>pci 0000:00:05.0:   MEM window: 0xfdf00000-0xfdffffff
>pci 0000:00:05.0:   PREFETCH window: 0x000000f9f00000-0x000000f9ffffff
>pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:06.0:   IO window: 0xe000-0xefff
>pci 0000:00:06.0:   MEM window: 0xfe000000-0xfeafffff
>pci 0000:00:06.0:   PREFETCH window: 0x000000fa000000-0x000000fcffffff
>pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
>pci 0000:00:14.4:   IO window: disabled
>pci 0000:00:14.4:   MEM window: 0xfeb00000-0xfebfffff
>pci 0000:00:14.4:   PREFETCH window: disabled
>pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:02.0: setting latency timer to 64
>pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:04.0: setting latency timer to 64
>pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:05.0: setting latency timer to 64
>pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:06.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffff]
>bus: 01 index 0 io port: [b000, bfff]
>bus: 01 index 1 mmio: [fdb00000, fdcfffff]
>bus: 01 index 2 mmio: [b0000000, bfffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 io port: [c000, cfff]
>bus: 02 index 1 mmio: [fdd00000, fddfffff]
>bus: 02 index 2 mmio: [c0000000, dfffffff]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 mmio: [0, 0]
>bus: 03 index 1 mmio: [fde00000, fdefffff]
>bus: 03 index 2 mmio: [0, 0]
>bus: 03 index 3 mmio: [0, 0]
>bus: 04 index 0 io port: [d000, dfff]
>bus: 04 index 1 mmio: [fdf00000, fdffffff]
>bus: 04 index 2 mmio: [f9f00000, f9ffffff]
>bus: 04 index 3 mmio: [0, 0]
>bus: 05 index 0 io port: [e000, efff]
>bus: 05 index 1 mmio: [fe000000, feafffff]
>bus: 05 index 2 mmio: [fa000000, fcffffff]
>bus: 05 index 3 mmio: [0, 0]
>bus: 08 index 0 mmio: [0, 0]
>bus: 08 index 1 mmio: [feb00000, febfffff]
>bus: 08 index 2 mmio: [0, 0]
>bus: 08 index 3 io port: [0, ffff]
>bus: 08 index 4 mmio: [0, ffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs... done
>Freeing initrd memory: 6404k freed
>Simple Boot Flag at 0x71 set to 0x1
>Machine check exception polling timer started.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1232132657.629:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 432
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>perfmon: added sampling format default
>pci 0000:01:05.0: Boot video device
>pcieport-driver 0000:00:02.0: setting latency timer to 64
>pcieport-driver 0000:00:02.0: found MSI capability
>pci_express 0000:00:02.0:pcie00: allocate port service
>pcieport-driver 0000:00:04.0: setting latency timer to 64
>pcieport-driver 0000:00:04.0: found MSI capability
>pci_express 0000:00:04.0:pcie00: allocate port service
>pcieport-driver 0000:00:05.0: setting latency timer to 64
>pcieport-driver 0000:00:05.0: found MSI capability
>pci_express 0000:00:05.0:pcie00: allocate port service
>pcieport-driver 0000:00:06.0: setting latency timer to 64
>pcieport-driver 0000:00:06.0: found MSI capability
>pci_express 0000:00:06.0:pcie00: allocate port service
>pci_express 0000:00:06.0:pcie02: allocate port service
>vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 6144k, total 16384k
>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>vesafb: protected mode interface info at c000:a1fe
>vesafb: pmi: set display start = c00ca2a0, set palette = c00ca35e
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 100719 bytes
>bootsplash: ...found (1024x768, 38691 bytes, v3).
>Console: switching to colour frame buffer device 124x44
>Clocksource tsc unstable (delta = -111393961 ns)
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver8 ports, IRQ sharing enabled
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel text: 2376k
>Write protecting the kernel read-only data: 1780k
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [P001] (supports 8 throttling states)
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (54 C)
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>udevd version 128 started
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:12.0: irq 16, io mem 0xfdafe000
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27.10-1.2-default ohci_hcd
>usb usb1: SerialNumber: 0000:00:12.0
>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:12.1: irq 16, io mem 0xfdafd000
>usb 1-2: new low speed USB device using ohci_hcd and address 2
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=046d, idProduct=c019
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2: Product: Logitech USB Optical Mouse
>usb 1-2: Manufacturer: Logitech
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27.10-1.2-default ohci_hcd
>usb usb2: SerialNumber: 0000:00:12.1
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdafc000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb 1-3: new full speed USB device using ohci_hcd and address 3
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27.10-1.2-default ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.0
>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>usb 1-3: configuration #1 chosen from 1 choice
>usb 1-3: New USB device found, idVendor=0408, idProduct=f003
>usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-3: Product: Windows CE USB Devices
>usb 1-3: Manufacturer: MicroSoft
>usb 1-3: SerialNumber: 7110611e-6f6d-3133-eb43-e4434b975785
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.1: irq 18, io mem 0xfdafb000
>usb 2-2: new full speed USB device using ohci_hcd and address 2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>usb 2-2: configuration #1 chosen from 1 choice
>usb 2-2: New USB device found, idVendor=064e, idProduct=f111
>usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>usb 2-2: Product: USB2.0 UVC 1.3M WebCam
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27.10-1.2-default ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.1
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>usb 2-2: Manufacturer: SuYin
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfdaff800 port 0xfdaff900 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xfdaff800 port 0xfdaff980 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xfdaff800 port 0xfdaffa00 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfdaff800 port 0xfdaffa80 irq 22
>usb 2-2: SerialNumber: CN1314-S13B-MI05-VS-R02.03.01
>hub 4-0:1.0: unable to enumerate USB device on port 2
>usb 4-3: new full speed USB device using ohci_hcd and address 3
>usb 4-3: configuration #1 chosen from 1 choice
>usb 4-3: New USB device found, idVendor=08ff, idProduct=1600
>ata1: softreset failed (device not ready)
>ata1: failed due to HW bug, retry pmp=0
>usb 4-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 4-3: Product: Fingerprint Sensor
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: ST9320320AS, 0303, max UDMA/133
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: softreset failed (device not ready)
>ata3: failed due to HW bug, retry pmp=0
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR07, max UDMA/133
>ata3.00: configured for UDMA/133
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      ST9320320AS      0303 PQ: 0 ANSI: 5
>scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50N  RR07 PQ: 0 ANSI: 5
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdaff000
>usb 1-2: USB disconnect, address 2
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 6 ports detected
>usb 1-3: USB disconnect, address 3
>usb 2-2: USB disconnect, address 2
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27.10-1.2-default ehci_hcd
>usb usb5: SerialNumber: 0000:00:12.2
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.2: debug port 1
>usb 5-5: new high speed USB device using ehci_hcd and address 4
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfdafa800
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb 5-5: configuration #1 chosen from 1 choice
>usb 5-5: New USB device found, idVendor=064e, idProduct=f111
>usb 5-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>usb 5-5: Product: USB2.0 UVC 1.3M WebCam
>usb 5-5: Manufacturer: SuYin
>usb 5-5: SerialNumber: CN1314-S13B-MI05-VS-R02.03.01
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>usb 1-2: new low speed USB device using ohci_hcd and address 4
>hub 6-0:1.0: 6 ports detected
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=046d, idProduct=c019
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2: Product: Logitech USB Optical Mouse
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: EHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.27.10-1.2-default ehci_hcd
>usb usb6: SerialNumber: 0000:00:13.2
>usb 1-2: Manufacturer: Logitech
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320GB/298GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320GB/298GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb 1-3: new full speed USB device using ohci_hcd and address 5
> sda1 sda2 sda3 < sda5 sda6<6>usb 1-3: configuration #1 chosen from 1 choice
> sda7 >
>usb 1-3: New USB device found, idVendor=0408, idProduct=f003
>usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-3: Product: Windows CE USB Devices
>usb 1-3: Manufacturer: MicroSoft
>usb 1-3: SerialNumber: 7110611e-6f6d-3133-eb43-e4434b975785
>usb 4-3: USB disconnect, address 3
>sd 0:0:0:0: [sda] Attached SCSI disk
>usbcore: registered new interface driver hiddev
>usb 4-3: new full speed USB device using ohci_hcd and address 4
>usb 4-3: configuration #1 chosen from 1 choice
>usb 4-3: New USB device found, idVendor=08ff, idProduct=1600
>usb 4-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 4-3: Product: Fingerprint Sensor
>input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input2
>input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:12.0-2
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>md: linear personality registered for level -1
>PM: Starting manual resume from disk
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>udevd version 128 started
>input: PC Speaker as /devices/platform/pcspkr/input/input3
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pata_atiixp 0000:00:14.1: setting latency timer to 64
>scsi4 : pata_atiixp
>scsi5 : pata_atiixp
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: AC Adapter [AC0] (on-line)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:0:0: Attached scsi generic sg1 type 5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>ricoh-mmc: Ricoh MMC controller found at 0000:08:01.2 [1180:0843] (rev 12)
>ricoh-mmc: Controller is now disabled.
>vendor=1002 device=4384
>ohci1394 0000:08:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, hpet irqs
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
>shpchp: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>vendor=1022 device=9605
>r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>r8169 0000:04:00.0: setting latency timer to 64
>eth0: RTL8168c/8111c at 0xf91ce000, 00:23:54:62:e0:b6, XID 3c4000c0 IRQ 219
>ath9k: 0.1
>vendor=1022 device=9604
>ath9k 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ath9k 0000:03:00.0: setting latency timer to 64
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>phy0: Selected rate control algorithm 'ath9k_rate_control'
>Linux video capture interface: v2.00
>ACPI: Lid Switch [LID]
>acpi device:06: registered as cooling_device2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/device:03/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: Battery Slot [BAT0] (battery present)
>proc_dir_entry 'video/VGA' already registered
>Uniform Multi-Platform E-IDE driver
>Pid: 1351, comm: modprobe Not tainted 2.6.27.10-1.2-default #1
> [<c0106600>] dump_trace+0x6b/0x249
> [<c0107135>] show_trace+0x20/0x39
> [<c034bfc0>] dump_stack+0x71/0x76
> [<c01c8bb2>] proc_register+0x14b/0x189
> [<c01c8d8f>] proc_mkdir_mode+0x33/0x46
> [<f91f7e59>] acpi_video_bus_add_fs+0x1f/0x169 [video]
> [<f91f8fb1>] acpi_video_bus_add+0xd6/0x319 [video]
> [<c027d7c4>] acpi_device_probe+0x44/0xfd
> [<c02a99d2>] really_probe+0xd7/0x1de
> [<c02a9bae>] __driver_attach+0x37/0x55
> [<c02a928d>] bus_for_each_dev+0x31/0x57
> [<c02a9784>] driver_attach+0x16/0x18
> [<c02a8c86>] bus_add_driver+0xec/0x21b
> [<c02a9d21>] driver_register+0x85/0xe2
> [<f909802f>] acpi_video_init+0x2f/0x4d [video]
> [<c010112b>] _stext+0x3b/0x127
> [<c014df5f>] sys_init_module+0x8a/0x19e
> [<c0104cfb>] sysenter_do_call+0x12/0x2f
> [<ffffe430>] 0xffffe430
> =======================
>acpi device:26: registered as cooling_device3
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:22/device:23/input/input9
>usbcore: registered new interface driver cdc_ether
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c00018ffa74]
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>asus-laptop: Asus Laptop Support version 0.42
>asus-laptop:   M51Ta model detected
>asus-laptop: Brightness ignored, must be controlled by ACPI video driver
>Registered led device: asus::mail
>uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (064e:f111)
>phy0: Atheros 9280: mem=0xf9260000, irq=16
>input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:12.2/usb5/5-5/5-5:1.0/input/input10
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:3047: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3051:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3055:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3056:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3064:    inputs: mic=0x12, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
>rndis_host 1-3:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47
>eth1: register 'rndis_host' at usb-0000:00:12.0-3, RNDIS device, 00:02:b3:92:a8:c4
>sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 22)
>vendor=1002 device=4384
>sdhci-pci 0000:08:01.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>usb 4-2: new full speed USB device using ohci_hcd and address 5
>vendor=1022 device=9603
>HDA Intel 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:02:00.1: setting latency timer to 64
>sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
>mmc0: SDHCI controller on PCI [0000:08:01.1] using DMA
>usb 4-2: configuration #1 chosen from 1 choice
>usb 4-2: New USB device found, idVendor=0b05, idProduct=1751
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 4-2: Product: BT-253
>usb 4-2: Manufacturer: Broadcom Corp
>usb 4-2: SerialNumber: 002243C7A417
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>Bluetooth: Core ver 2.13
>usbcore: registered new interface driver rndis_host
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>usbcore: registered new interface driver rndis_wlan
>Bluetooth: Generic Bluetooth USB driver ver 0.3
>usbcore: registered new interface driver btusb
>Adding 2097144k swap on /dev/mapper/system-swap.  Priority:-1 extents:1 across:2097144k
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>powernow-k8: Found 1 AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-84 processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : pstate 0 (2300 MHz)
>powernow-k8:    1 : pstate 1 (1200 MHz)
>powernow-k8:    2 : pstate 2 (600 MHz)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>Bridge firewalling registered
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>r8169: eth0: link up
>r8169: eth0: link up
>NET: Registered protocol family 17
>ForceXPAon: 0
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ForceXPAon: 0
>bootsplash: status on console 0 changed to on
>ForceXPAon: 0
>ForceXPAon: 0
>martian source 255.255.255.255 from 169.254.2.1, on dev eth1
>ll header: ff:ff:ff:ff:ff:ff:02:02:b3:92:a8:c4:08:00:45:00:01:2e:09:ef:00:00:80:11:83:d1:a9:fe:02:01:ff:ff:ff:ff:00:43:00:44:01:1a:06:cf:02:01:06:00:7b:7d:d0:2d:00:00:00:00:00:00:00:00
>ForceXPAon: 0
>ForceXPAon: 0
>wlan0: authenticate with AP 00:16:e3:d0:5f:83
>wlan0: authenticated
>wlan0: associate with AP 00:16:e3:d0:5f:83
>wlan0: RX AssocResp from 00:16:e3:d0:5f:83 (capab=0x401 status=0 aid=1)
>wlan0: associated
>ForceXPAon: 0
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: disassociating by local choice (reason=3)
>martian source 255.255.255.255 from 192.168.1.1, on dev eth0
>ll header: ff:ff:ff:ff:ff:ff:00:1e:c1:a1:eb:00:08:00
>martian source 255.255.255.255 from 169.254.2.1, on dev eth1
>ll header: ff:ff:ff:ff:ff:ff:02:02:b3:92:a8:c4:08:00:45:00:01:2e:09:f0:00:00:80:11:83:d0:a9:fe:02:01:ff:ff:ff:ff:00:43:00:44:01:1a:af:ce:02:01:06:00:7b:7d:d0:2d:00:00:00:00:00:00:00:00
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=169.254.2.2 DST=224.0.0.251 LEN=486 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=466 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=169.254.2.2 DST=224.0.0.251 LEN=260 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=240 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=169.254.2.2 DST=224.0.0.251 LEN=486 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=466 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=169.254.2.2 DST=224.0.0.251 LEN=486 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=466 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=169.254.2.2 DST=224.0.0.251 LEN=450 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=430 
>martian source 255.255.255.255 from 192.168.1.1, on dev eth0
>ll header: ff:ff:ff:ff:ff:ff:00:1e:c1:a1:eb:00:08:00
>eth1: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.50 DST=224.0.0.251 LEN=451 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=431 
>SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=169.254.2.2 DST=224.0.0.251 LEN=450 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=430 
>eth0: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.50 DST=224.0.0.251 LEN=414 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=394 
>wlan0: no IPv6 routers present
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.50 DST=224.0.0.251 LEN=451 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=431 
>ForceXPAon: 0
>ForceXPAon: 0
>ForceXPAon: 0
>hda-intel: Invalid position buffer, using LPIB read method instead.
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1e:c1:a1:eb:00:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=3214 PROTO=2 
>ForceXPAon: 0
>ForceXPAon: 0
>ForceXPAon: 0
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1e:c1:a1:eb:00:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=3217 PROTO=2 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1e:c1:a1:eb:00:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=3218 PROTO=2

Actions: View

Attachments on bug 462637: 262500 | 262501 | 262502 | 265698 | 265701 | 274292 | 329718