Attachment 293329 Details for Bug 505670

hwinfo

hwinfo (text/plain), 67.72 KB, created by Lukas Lipavsky on 2009-05-20 15:02:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lukas Lipavsky

Created: 2009-05-20 15:02:54 UTC

Size: 67.72 KB

patch

obsolete

>============ start debug info ============
>libhd version 16.0 (x86-64)
>using /var/lib/hardware
>debug = 0xff7ffff7
>probe = 0x00138fc4aa17fcf9fffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +modem +modem.usb +parallel +parallel.lp +parallel.zip -isa -isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -bios.vram -bios.acpi -bios.ddc.ports -modules.pata -net.eeprom -x86emu -max -lxrc)
>shm: attached segment 131074 at 0x7f68b64b5000
>>> hal.1: read hal data
>  hal: dbus_bus_get: org.freedesktop.DBus.Error.FileNotFound: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
>>> floppy.1: get nvram
>>> floppy.2: klog info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>  bios: 0 disks
>>> bios.2: rom
>>> bios.3: smp
>----- BIOS data 0x00400 - 0x004ff -----
>  400  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  410  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  420  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  440  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  470  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  480  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  490  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>>> bios.4: vbe
>  klog: pci config type 1
>vbe: failed to read 3 bytes at 0xc0000
>VBE: Could not init Int10
>>> bios.5: 32
>>> bios.6: acpi
>>> sys.1: cpu
>  vm check: vm_1 = 0, vm_2 = 0
>  is_vmware = 0, has_vmware_mouse = 0
>>> misc.9: kernel log
>----- kernel log -----
>  <6>Initializing cgroup subsys cpuset
>  <6>Initializing cgroup subsys cpu
>  <5>Linux version 2.6.29-6-default (geeko@buildhost) (gcc version 4.3.3 [gcc-4_3-branch revision 144878] (SUSE Linux) ) #1 SMP 2009-03-24 15:38:18 +0100
>  <6>Command line: resume=/dev/disk/by-id/ata-FUJITSU_MHW2120BH_NZ2BT7926JVA-part7 splash=silent quiet vga=0x314
>  <4>KERNEL supported cpus:
>  <4>  Intel GenuineIntel
>  <4>  AMD AuthenticAMD
>  <4>  Centaur CentaurHauls
>  <6>BIOS-provided physical RAM map:
>  <6> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
>  <6> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
>  <6> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
>  <6> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>  <6> BIOS-e820: 0000000000100000 - 00000000beeb0000 (usable)
>  <6> BIOS-e820: 00000000beeb0000 - 00000000beecc000 (ACPI data)
>  <6> BIOS-e820: 00000000beecc000 - 00000000bef00000 (ACPI NVS)
>  <6> BIOS-e820: 00000000bef00000 - 00000000bf000000 (reserved)
>  <6> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
>  <6> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>  <6> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
>  <6> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
>  <6> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
>  <6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>  <6> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>  <6>DMI present.
>  <6>last_pfn = 0xbeeb0 max_arch_pfn = 0x100000000
>  <6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>  <6>init_memory_mapping: 0000000000000000-00000000beeb0000
>  <7> 0000000000 - 00bee00000 page 2M
>  <7> 00bee00000 - 00beeb0000 page 4k
>  <7>kernel direct mapping tables up to beeb0000 @ 8000-d000
>  <6>last_map_addr: beeb0000 end: beeb0000
>  <6>RAMDISK: 379b9000 - 37fefceb
>  <4>ACPI: RSDP 000F68C0, 0024 (r2 LENOVO)
>  <4>ACPI: XSDT BEEBB647, 0094 (r1 LENOVO TP-7L        2250  LTP        0)
>  <4>ACPI: FACP BEEBB700, 00F4 (r3 LENOVO TP-7L        2250 LNVO        1)
>  <4>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204]
>  <4>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204]
>  <4>ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204]
>  <4>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>  <4>ACPI: DSDT BEEBBB1D, 10009 (r1 LENOVO TP-7L        2250 MSFT  3000000)
>  <4>ACPI: FACS BEEE4000, 0040
>  <4>ACPI: SSDT BEEBB8B4, 0269 (r1 LENOVO TP-7L        2250 MSFT  3000000)
>  <4>ACPI: ECDT BEECBB26, 0052 (r1 LENOVO TP-7L        2250 LNVO        1)
>  <4>ACPI: TCPA BEECBB78, 0032 (r2 LENOVO TP-7L        2250 LNVO        1)
>  <4>ACPI: APIC BEECBBAA, 0068 (r1 LENOVO TP-7L        2250 LNVO        1)
>  <4>ACPI: MCFG BEECBC12, 003C (r1 LENOVO TP-7L        2250 LNVO        1)
>  <4>ACPI: HPET BEECBC4E, 0038 (r1 LENOVO TP-7L        2250 LNVO        1)
>  <4>ACPI: SLIC BEECBDF0, 0176 (r1 LENOVO TP-7L        2250  LTP        0)
>  <4>ACPI: BOOT BEECBF66, 0028 (r1 LENOVO TP-7L        2250  LTP        1)
>  <4>ACPI: ASF! BEECBF8E, 0072 (r16 LENOVO TP-7L        2250 PTL         1)
>  <4>ACPI: SSDT BEEE26D9, 025F (r1 LENOVO TP-7L        2250 INTL 20050513)
>  <4>ACPI: SSDT BEEE2938, 00A6 (r1 LENOVO TP-7L        2250 INTL 20050513)
>  <4>ACPI: SSDT BEEE29DE, 04F7 (r1 LENOVO TP-7L        2250 INTL 20050513)
>  <4>ACPI: SSDT BEEE2ED5, 01D8 (r1 LENOVO TP-7L        2250 INTL 20050513)
>  <5>ACPI: DMI detected: Lenovo ThinkPad T61
>  <5>ACPI: Added _OSI(Linux)
>  <7>ACPI: Local APIC address 0xfee00000
>  <6>No NUMA configuration found
>  <6>Faking a node at 0000000000000000-00000000beeb0000
>  <6>Bootmem setup node 0 0000000000000000-00000000beeb0000
>  <6>  NODE_DATA [000000000000b000 - 0000000000022fff]
>  <6>  bootmap [0000000000023000 -  000000000003add7] pages 18
>  <6>(6 early reservations) ==> bootmem [0000000000 - 00beeb0000]
>  <6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  <6>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  <6>  #2 [0000200000 - 0000af5830]    TEXT DATA BSS ==> [0000200000 - 0000af5830]
>  <6>  #3 [00379b9000 - 0037fefceb]          RAMDISK ==> [00379b9000 - 0037fefceb]
>  <6>  #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
>  <6>  #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
>  <6>found SMP MP-table at [ffff8800000f68f0] 000f68f0
>  <7> [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0
>  <4>Zone PFN ranges:
>  <4>  DMA      0x00000000 -> 0x00001000
>  <4>  DMA32    0x00001000 -> 0x00100000
>  <4>  Normal   0x00100000 -> 0x00100000
>  <4>Movable zone start PFN for each node
>  <4>early_node_map[2] active PFN ranges
>  <4>    0: 0x00000000 -> 0x0000009d
>  <4>    0: 0x00000100 -> 0x000beeb0
>  <7>On node 0 totalpages: 781901
>  <7>  DMA zone: 56 pages used for memmap
>  <7>  DMA zone: 2399 pages reserved
>  <7>  DMA zone: 1542 pages, LIFO batch:0
>  <7>  DMA32 zone: 10636 pages used for memmap
>  <7>  DMA32 zone: 767268 pages, LIFO batch:31
>  <6>ACPI: PM-Timer IO Port: 0x1008
>  <7>ACPI: Local APIC address 0xfee00000
>  <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>  <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>  <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>  <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>  <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>  <6>IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>  <7>ACPI: IRQ0 used by override.
>  <7>ACPI: IRQ2 used by override.
>  <7>ACPI: IRQ9 used by override.
>  <6>Using ACPI (MADT) for SMP configuration information
>  <6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>  <6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>  <7>nr_irqs_gsi: 24
>  <6>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>  <6>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>  <6>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>  <6>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>  <6>PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
>  <6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>  <6>Allocating PCI resources starting at c0000000 (gap: bf000000:31000000)
>  <6>NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
>  <6>PERCPU: Allocating 49152 bytes of per cpu data
>  <4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 768810
>  <4>Policy zone: DMA32
>  <5>Kernel command line: resume=/dev/disk/by-id/ata-FUJITSU_MHW2120BH_NZ2BT7926JVA-part7 splash=silent quiet vga=0x314
>  <6>bootsplash: silent mode.
>  <6>Initializing CPU#0
>  <4>Experimental hierarchical RCU implementation.
>  <4>Experimental hierarchical RCU init done.
>  <4>PID hash table entries: 4096 (order: 12, 32768 bytes)
>  <6>Extended CMOS year: 2000
>  <4>Fast TSC calibration using PIT
>  <4>Detected 1994.728 MHz processor.
>  <4>Console: colour dummy device 80x25
>  <6>console [tty0] enabled
>  <6>Checking aperture...
>  <6>No AGP bridge found
>  <6>Memory: 3068568k/3128000k available (3065k kernel code, 396k absent, 59036k reserved, 3463k data, 884k init)
>  <7>hpet clockevent registered
>  <6>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>  <6>Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.45 BogoMIPS (lpj=7978912)
>  <4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
>  <6>Security Framework initialized
>  <6>SELinux:  Disabled at boot.
>  <6>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>  <6>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>  <4>Mount-cache hash table entries: 256
>  <6>Initializing cgroup subsys ns
>  <6>Initializing cgroup subsys cpuacct
>  <6>Initializing cgroup subsys memory
>  <6>Initializing cgroup subsys devices
>  <6>Initializing cgroup subsys freezer
>  <6>Initializing cgroup subsys net_cls
>  <6>CPU: L1 I cache: 32K, L1 D cache: 32K
>  <6>CPU: L2 cache: 4096K
>  <6>[ds] using Core 2/Atom configuration
>  <6>CPU 0/0x0 -> Node 0
>  <6>CPU: Physical Processor ID: 0
>  <6>CPU: Processor Core ID: 0
>  <6>CPU0: Thermal monitoring enabled (TM2)
>  <6>using mwait in idle threads.
>  <6>ACPI: Core revision 20081204
>  <6>ACPI: Checking initramfs for custom DSDT
>  <6>Setting APIC routing to flat
>  <6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>  <6>CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>  <6>Booting processor 1 APIC 0x1 ip 0x6000
>  <6>Initializing CPU#1
>  <6>Calibrating delay using timer specific routine.. 3989.97 BogoMIPS (lpj=7979953)
>  <6>CPU: L1 I cache: 32K, L1 D cache: 32K
>  <6>CPU: L2 cache: 4096K
>  <6>[ds] using Core 2/Atom configuration
>  <6>CPU 1/0x1 -> Node 0
>  <6>CPU: Physical Processor ID: 0
>  <6>CPU: Processor Core ID: 1
>  <6>CPU1: Thermal monitoring enabled (TM2)
>  <6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>  <6>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>  <6>checking TSC synchronization [CPU#0 -> CPU#1]:
>  <4>Measured 1188130 cycles TSC warp between CPUs, turning off TSC clock.
>  <4>Marking TSC unstable due to check_tsc_sync_source failed
>  <6>Brought up 2 CPUs
>  <6>Total of 2 processors activated (7979.43 BogoMIPS).
>  <7>CPU0 attaching sched-domain:
>  <7> domain 0: span 0-1 level MC
>  <7>  groups: 0 1
>  <7>CPU1 attaching sched-domain:
>  <7> domain 0: span 0-1 level MC
>  <7>  groups: 1 0
>  <6>net_namespace: 2224 bytes
>  <6>Booting paravirtualized kernel on bare hardware
>  <6>NET: Registered protocol family 16
>  <6>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>  <6>ACPI: bus type pci registered
>  <5>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>  <5>PCI: MCFG area at f0000000 reserved in E820
>  <6>PCI: Using MMCONFIG at f0000000 - f3ffffff
>  <6>PCI: Using configuration type 1 for base access
>  <4>bio: create slab <bio-0> at 0
>  <5>perfmon: version 2.82
>  <5>perfmon: CPU hotplug support enabled
>  <6>ACPI: EC: EC description table is found, configuring boot EC
>  <5>ACPI: BIOS _OSI(Linux) query honored via DMI
>  <6>ACPI: EC: non-query interrupt received, switching to interrupt mode
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: (supports S0 S3 S4 S5)
>  <6>ACPI: Using IOAPIC for interrupt routing
>  <6>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>  <6>ACPI: EC: driver started in interrupt mode
>  <6>ACPI: ACPI Dock Station Driver: 3 docks/bays found
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <6>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:00:01.0: PME# disabled
>  <7>pci 0000:00:19.0: reg 10 32bit mmio: [0xfe200000-0xfe21ffff]
>  <7>pci 0000:00:19.0: reg 14 32bit mmio: [0xfe225000-0xfe225fff]
>  <7>pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
>  <6>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:00:19.0: PME# disabled
>  <7>pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
>  <7>pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
>  <7>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff]
>  <6>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:00:1a.7: PME# disabled
>  <7>pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe220000-0xfe223fff]
>  <6>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:00:1b.0: PME# disabled
>  <6>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:00:1c.0: PME# disabled
>  <6>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:00:1c.1: PME# disabled
>  <6>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:00:1c.2: PME# disabled
>  <6>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:00:1c.3: PME# disabled
>  <6>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:00:1c.4: PME# disabled
>  <7>pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
>  <7>pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
>  <7>pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff]
>  <7>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff]
>  <6>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:00:1d.7: PME# disabled
>  <6>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>  <6>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>  <6>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
>  <6>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
>  <6>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
>  <7>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>  <7>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>  <7>pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
>  <7>pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
>  <7>pci 0000:00:1f.1: reg 20 io port: [0x1830-0x183f]
>  <7>pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f]
>  <7>pci 0000:00:1f.2: reg 14 io port: [0x1c1c-0x1c1f]
>  <7>pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47]
>  <7>pci 0000:00:1f.2: reg 1c io port: [0x1c18-0x1c1b]
>  <7>pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
>  <7>pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff]
>  <6>pci 0000:00:1f.2: PME# supported from D3hot
>  <6>pci 0000:00:1f.2: PME# disabled
>  <7>pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff]
>  <7>pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
>  <7>pci 0000:01:00.0: reg 10 32bit mmio: [0xd6000000-0xd6ffffff]
>  <7>pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
>  <7>pci 0000:01:00.0: reg 1c 64bit mmio: [0xd4000000-0xd5ffffff]
>  <7>pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
>  <7>pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>  <7>pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
>  <7>pci 0000:00:01.0: bridge 32bit mmio: [0xd4000000-0xd6ffffff]
>  <7>pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
>  <7>pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
>  <7>pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff]
>  <7>pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff]
>  <7>pci 0000:03:00.0: reg 10 64bit mmio: [0xdf2fe000-0xdf2fffff]
>  <6>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>  <6>pci 0000:03:00.0: PME# disabled
>  <7>pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
>  <7>pci 0000:00:1c.1: bridge 32bit mmio: [0xdc100000-0xdf2fffff]
>  <7>pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfd00000-0xdfdfffff]
>  <7>pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
>  <7>pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff]
>  <7>pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfa00000-0xdfafffff]
>  <7>pci 0000:00:1c.3: bridge io port: [0x6000-0x6fff]
>  <7>pci 0000:00:1c.3: bridge 32bit mmio: [0xd0000000-0xd1ffffff]
>  <7>pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf700000-0xdf7fffff]
>  <7>pci 0000:00:1c.4: bridge io port: [0x7000-0x7fff]
>  <7>pci 0000:00:1c.4: bridge 32bit mmio: [0xcc000000-0xcdffffff]
>  <7>pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf400000-0xdf4fffff]
>  <7>pci 0000:15:00.0: reg 10 32bit mmio: [0xf8100000-0xf8100fff]
>  <7>pci 0000:15:00.0: supports D1 D2
>  <6>pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>  <6>pci 0000:15:00.0: PME# disabled
>  <7>pci 0000:15:00.1: reg 10 32bit mmio: [0xf8101000-0xf81017ff]
>  <7>pci 0000:15:00.1: supports D1 D2
>  <6>pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>  <6>pci 0000:15:00.1: PME# disabled
>  <6>pci 0000:00:1e.0: transparent bridge
>  <7>pci 0000:00:1e.0: bridge io port: [0x8000-0xbfff]
>  <7>pci 0000:00:1e.0: bridge 32bit mmio: [0xf8100000-0xfbffffff]
>  <7>pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>  <6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>  <6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>  <6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>  <6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>  <6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>  <6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>  <6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>  <6>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>  <6>ACPI: Power Resource [PUBS] (on)
>  <6>PCI: Using ACPI for IRQ routing
>  <6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>  <6>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>  <7>Switched to high resolution mode on CPU 0
>  <7>Switched to high resolution mode on CPU 1
>  <6>pnp: PnP ACPI init
>  <6>ACPI: bus type pnp registered
>  <6>pnp: PnP ACPI: found 13 devices
>  <6>ACPI: ACPI bus type pnp unregistered
>  <6>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>  <6>system 00:00: iomem range 0xc0000-0xc3fff has been reserved
>  <6>system 00:00: iomem range 0xc4000-0xc7fff has been reserved
>  <6>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>  <6>system 00:00: iomem range 0xcc000-0xcffff has been reserved
>  <6>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>  <6>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>  <6>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>  <6>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>  <6>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>  <6>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>  <6>system 00:00: iomem range 0x100000-0xbeffffff could not be reserved
>  <6>system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
>  <6>system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
>  <6>system 00:02: ioport range 0x164e-0x164f has been reserved
>  <6>system 00:02: ioport range 0x1000-0x107f has been reserved
>  <6>system 00:02: ioport range 0x1180-0x11bf has been reserved
>  <6>system 00:02: ioport range 0x800-0x80f has been reserved
>  <6>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>  <6>system 00:02: ioport range 0x1600-0x165f could not be reserved
>  <6>system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
>  <6>system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
>  <6>system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
>  <6>system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
>  <6>system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
>  <6>system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
>  <6>pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
>  <6>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>  <6>pci 0000:00:01.0:   IO window: 0x2000-0x2fff
>  <6>pci 0000:00:01.0:   MEM window: 0xd4000000-0xd6ffffff
>  <6>pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
>  <6>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>  <6>pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
>  <6>pci 0000:00:1c.0:   MEM window: 0xfc000000-0xfdffffff
>  <6>pci 0000:00:1c.0:   PREFETCH window: 0x000000f8000000-0x000000f80fffff
>  <6>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>  <6>pci 0000:00:1c.1:   IO window: 0x4000-0x4fff
>  <6>pci 0000:00:1c.1:   MEM window: 0xdc100000-0xdf2fffff
>  <6>pci 0000:00:1c.1:   PREFETCH window: 0x000000dfd00000-0x000000dfdfffff
>  <6>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
>  <6>pci 0000:00:1c.2:   IO window: 0x5000-0x5fff
>  <6>pci 0000:00:1c.2:   MEM window: 0xd8000000-0xd9ffffff
>  <6>pci 0000:00:1c.2:   PREFETCH window: 0x000000dfa00000-0x000000dfafffff
>  <6>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
>  <6>pci 0000:00:1c.3:   IO window: 0x6000-0x6fff
>  <6>pci 0000:00:1c.3:   MEM window: 0xd0000000-0xd1ffffff
>  <6>pci 0000:00:1c.3:   PREFETCH window: 0x000000df700000-0x000000df7fffff
>  <6>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
>  <6>pci 0000:00:1c.4:   IO window: 0x7000-0x7fff
>  <6>pci 0000:00:1c.4:   MEM window: 0xcc000000-0xcdffffff
>  <6>pci 0000:00:1c.4:   PREFETCH window: 0x000000df400000-0x000000df4fffff
>  <6>pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
>  <6>pci 0000:15:00.0:   IO window: 0x008000-0x0080ff
>  <6>pci 0000:15:00.0:   IO window: 0x008400-0x0084ff
>  <6>pci 0000:15:00.0:   PREFETCH window: 0xf4000000-0xf7ffffff
>  <6>pci 0000:15:00.0:   MEM window: 0xc0000000-0xc3ffffff
>  <6>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
>  <6>pci 0000:00:1e.0:   IO window: 0x8000-0xbfff
>  <6>pci 0000:00:1e.0:   MEM window: 0xf8100000-0xfbffffff
>  <6>pci 0000:00:1e.0:   PREFETCH window: 0x000000f4000000-0x000000f7ffffff
>  <7>  alloc irq_desc for 16 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <6>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>  <7>pci 0000:00:01.0: setting latency timer to 64
>  <7>  alloc irq_desc for 20 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <6>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>  <7>pci 0000:00:1c.0: setting latency timer to 64
>  <7>  alloc irq_desc for 21 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <6>pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>  <7>pci 0000:00:1c.1: setting latency timer to 64
>  <7>  alloc irq_desc for 22 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <6>pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>  <7>pci 0000:00:1c.2: setting latency timer to 64
>  <7>  alloc irq_desc for 23 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <6>pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>  <7>pci 0000:00:1c.3: setting latency timer to 64
>  <6>pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>  <7>pci 0000:00:1c.4: setting latency timer to 64
>  <6>pci 0000:00:1e.0: enabling device (0005 -> 0007)
>  <7>pci 0000:00:1e.0: setting latency timer to 64
>  <6>pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>  <7>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>  <7>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>  <7>pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
>  <7>pci_bus 0000:01: resource 1 mem: [0xd4000000-0xd6ffffff]
>  <7>pci_bus 0000:01: resource 2 mem: [0xe0000000-0xefffffff]
>  <7>pci_bus 0000:01: resource 3 mem: [0x0-0x0]
>  <7>pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
>  <7>pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff]
>  <7>pci_bus 0000:02: resource 2 mem: [0xf8000000-0xf80fffff]
>  <7>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>  <7>pci_bus 0000:03: resource 0 io:  [0x4000-0x4fff]
>  <7>pci_bus 0000:03: resource 1 mem: [0xdc100000-0xdf2fffff]
>  <7>pci_bus 0000:03: resource 2 mem: [0xdfd00000-0xdfdfffff]
>  <7>pci_bus 0000:03: resource 3 mem: [0x0-0x0]
>  <7>pci_bus 0000:04: resource 0 io:  [0x5000-0x5fff]
>  <7>pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff]
>  <7>pci_bus 0000:04: resource 2 mem: [0xdfa00000-0xdfafffff]
>  <7>pci_bus 0000:04: resource 3 mem: [0x0-0x0]
>  <7>pci_bus 0000:05: resource 0 io:  [0x6000-0x6fff]
>  <7>pci_bus 0000:05: resource 1 mem: [0xd0000000-0xd1ffffff]
>  <7>pci_bus 0000:05: resource 2 mem: [0xdf700000-0xdf7fffff]
>  <7>pci_bus 0000:05: resource 3 mem: [0x0-0x0]
>  <7>pci_bus 0000:0d: resource 0 io:  [0x7000-0x7fff]
>  <7>pci_bus 0000:0d: resource 1 mem: [0xcc000000-0xcdffffff]
>  <7>pci_bus 0000:0d: resource 2 mem: [0xdf400000-0xdf4fffff]
>  <7>pci_bus 0000:0d: resource 3 mem: [0x0-0x0]
>  <7>pci_bus 0000:15: resource 0 io:  [0x8000-0xbfff]
>  <7>pci_bus 0000:15: resource 1 mem: [0xf8100000-0xfbffffff]
>  <7>pci_bus 0000:15: resource 2 mem: [0xf4000000-0xf7ffffff]
>  <7>pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
>  <7>pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
>  <7>pci_bus 0000:16: resource 0 io:  [0x8000-0x80ff]
>  <7>pci_bus 0000:16: resource 1 io:  [0x8400-0x84ff]
>  <7>pci_bus 0000:16: resource 2 mem: [0xf4000000-0xf7ffffff]
>  <7>pci_bus 0000:16: resource 3 mem: [0xc0000000-0xc3ffffff]
>  <6>NET: Registered protocol family 2
>  <6>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>  <6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>  <6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>  <6>TCP: Hash tables configured (established 524288 bind 65536)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <6>Unpacking initramfs... done
>  <6>Freeing initrd memory: 6363k freed
>  <6>Simple Boot Flag at 0x35 set to 0x1
>  <6>audit: initializing netlink socket (disabled)
>  <5>type=2000 audit(1242721806.756:1): initialized
>  <6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>  <5>VFS: Disk quotas dquot_6.5.2
>  <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>  <6>msgmni has been set to 1501
>  <6>alg: No test for stdrng (krng)
>  <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered (default)
>  <6>perfmon: added sampling format default
>  <7>pci 0000:01:00.0: Boot video device
>  <7>pcieport-driver 0000:00:01.0: setting latency timer to 64
>  <7>  alloc irq_desc for 24 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <7>pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
>  <7>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>  <7>  alloc irq_desc for 25 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <7>pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
>  <7>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>  <7>  alloc irq_desc for 26 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <7>pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
>  <7>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>  <7>  alloc irq_desc for 27 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <7>pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
>  <7>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>  <7>  alloc irq_desc for 28 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <7>pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
>  <7>pcieport-driver 0000:00:1c.4: setting latency timer to 64
>  <7>  alloc irq_desc for 29 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <7>pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X
>  <6>vesafb: framebuffer at 0xd5000000, mapped to 0xffffc20005100000, using 3750k, total 14336k
>  <6>vesafb: mode is 800x600x16, linelength=1600, pages=2
>  <6>vesafb: scrolling: redraw
>  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>  <6>bootsplash 3.1.6-2004/03/31: looking for picture...
>  <6>bootsplash: silentjpeg size 82170 bytes
>  <6>bootsplash: ...found (800x600, 31893 bytes, v3).
>  <4>Console: switching to colour frame buffer device 96x33
>  <6>fb0: VESA VGA frame buffer device
>  <6>Non-volatile memory driver v1.3
>  <6>Linux agpgart interface v0.103
>  <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
>  <6>serial 00:0a: activated
>  <6>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <6>Fixed MDIO Bus: probed
>  <6>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>mice: PS/2 mouse device common for all mice
>  <6>cpuidle: using governor ladder
>  <6>cpuidle: using governor menu
>  <6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>  <6>TCP cubic registered
>  <6>lib80211: common routines for IEEE802.11 drivers
>  <7>lib80211_crypt: registered algorithm 'NULL'
>  <6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>  <6>serio: Synaptics pass-through port at isa0060/serio1/input0
>  <6>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
>  <6>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>  <6>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input2
>  <4>registered taskstats version 1
>  <6>Freeing unused kernel memory: 884k freed
>  <6>Write protecting the kernel read-only data: 5524k
>  <4>ACPI: SSDT BEEE1B32, 02C4 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>  <4>ACPI: SSDT BEEE1E7B, 085E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>  <7>Monitor-Mwait will be used to enter C-1 state
>  <7>Monitor-Mwait will be used to enter C-2 state
>  <7>Monitor-Mwait will be used to enter C-3 state
>  <6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>  <6>processor ACPI_CPU:00: registered as cooling_device0
>  <6>ACPI: Processor [CPU0] (supports 8 throttling states)
>  <4>ACPI: SSDT BEEE1A6A, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>  <4>ACPI: SSDT BEEE1DF6, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>  <6>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>  <6>processor ACPI_CPU:01: registered as cooling_device1
>  <6>ACPI: Processor [CPU1] (supports 8 throttling states)
>  <6>thermal LNXTHERM:01: registered as thermal_zone0
>  <6>ACPI: Thermal Zone [THM0] (41 C)
>  <6>thermal LNXTHERM:02: registered as thermal_zone1
>  <6>ACPI: Thermal Zone [THM1] (40 C)
>  <5>SCSI subsystem initialized
>  <7>libata version 3.00 loaded.
>  <7>ahci 0000:00:1f.2: version 3.0
>  <6>ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>  <7>  alloc irq_desc for 30 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <7>ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
>  <6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
>  <6>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>  <7>ahci 0000:00:1f.2: setting latency timer to 64
>  <6>scsi0 : ahci
>  <6>scsi1 : ahci
>  <6>scsi2 : ahci
>  <6>ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 30
>  <6>ata2: DUMMY
>  <6>ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 30
>  <6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>  <7>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>  <6>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>  <7>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>  <6>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>  <6>ata1.00: ATA-8: FUJITSU MHW2120BH, 00840015, max UDMA/100
>  <6>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
>  <7>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
>  <6>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
>  <7>ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
>  <6>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>  <6>ata1.00: configured for UDMA/100
>  <6>ata1.00: configured for UDMA/100
>  <6>ata1: EH complete
>  <5>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 0084 PQ: 0 ANSI: 5
>  <4>Clocksource tsc unstable (delta = -490025272 ns)
>  <6>ata3: SATA link down (SStatus 0 SControl 300)
>  <7>ata_piix 0000:00:1f.1: version 2.12
>  <6>ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
>  <7>ata_piix 0000:00:1f.1: setting latency timer to 64
>  <6>scsi3 : ata_piix
>  <6>scsi4 : ata_piix
>  <6>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
>  <6>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
>  <6>ata4: clearing spurious IRQ
>  <6>ata4.00: ATAPI: MATSHITADVD-RAM UJ-852, RB01, max UDMA/33
>  <6>ata4: clearing spurious IRQ
>  <6>ata4: clearing spurious IRQ
>  <6>ata4.00: configured for UDMA/33
>  <4>isa bounce pool size: 16 pages
>  <5>scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-852   RB01 PQ: 0 ANSI: 5
>  <7>ata5: port disabled. ignoring.
>  <6>Uniform Multi-Platform E-IDE driver
>  <6>device-mapper: uevent: version 1.0.3
>  <6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>  <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>  <6>udev: starting version 141
>  <6>rtc_cmos 00:07: RTC can wake from S4
>  <6>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>  <6>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>  <6>usbcore: registered new interface driver usbfs
>  <6>usbcore: registered new interface driver hub
>  <6>usbcore: registered new device driver usb
>  <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>  <6>ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>  <6>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>  <7>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>  <6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>  <6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>  <7>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>  <6>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
>  <6>uhci_hcd: USB Universal Host Controller Interface driver
>  <6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>  <6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>  <6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb1: Product: EHCI Host Controller
>  <6>usb usb1: Manufacturer: Linux 2.6.29-6-default ehci_hcd
>  <6>usb usb1: SerialNumber: 0000:00:1a.7
>  <6>usb usb1: configuration #1 chosen from 1 choice
>  <6>hub 1-0:1.0: USB hub found
>  <6>hub 1-0:1.0: 4 ports detected
>  <6>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>  <7>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>  <6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
>  <6>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
>  <6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>  <6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb2: Product: UHCI Host Controller
>  <6>usb usb2: Manufacturer: Linux 2.6.29-6-default uhci_hcd
>  <6>usb usb2: SerialNumber: 0000:00:1a.0
>  <6>usb usb2: configuration #1 chosen from 1 choice
>  <6>hub 2-0:1.0: USB hub found
>  <6>hub 2-0:1.0: 2 ports detected
>  <6>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>  <7>  alloc irq_desc for 19 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <6>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>  <7>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>  <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>  <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
>  <6>ehci_hcd 0000:00:1d.7: debug port 1
>  <7>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>  <6>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
>  <6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>  <6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>  <6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb3: Product: EHCI Host Controller
>  <6>usb usb3: Manufacturer: Linux 2.6.29-6-default ehci_hcd
>  <6>usb usb3: SerialNumber: 0000:00:1d.7
>  <6>usb usb3: configuration #1 chosen from 1 choice
>  <6>hub 3-0:1.0: USB hub found
>  <6>hub 3-0:1.0: 6 ports detected
>  <5>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>  <5>sd 0:0:0:0: [sda] Write Protect is off
>  <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>  <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>  <5>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
>  <5>sd 0:0:0:0: [sda] Write Protect is off
>  <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>  <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>  <6> sda:<6>uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>  <6>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>  <7>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>  <6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>  <6>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
>  <6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>  <6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb4: Product: UHCI Host Controller
>  <6>usb usb4: Manufacturer: Linux 2.6.29-6-default uhci_hcd
>  <6>usb usb4: SerialNumber: 0000:00:1a.1
>  <6>usb usb4: configuration #1 chosen from 1 choice
>  <6>hub 4-0:1.0: USB hub found
>  <6>hub 4-0:1.0: 2 ports detected
>  <6>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>  <6>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>  <7>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>  <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>  <6>uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
>  <6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>  <6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb5: Product: UHCI Host Controller
>  <6>usb usb5: Manufacturer: Linux 2.6.29-6-default uhci_hcd
>  <6>usb usb5: SerialNumber: 0000:00:1d.0
>  <6>usb usb5: configuration #1 chosen from 1 choice
>  <6>hub 5-0:1.0: USB hub found
>  <6>hub 5-0:1.0: 2 ports detected
>  <7>  alloc irq_desc for 17 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <6>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>  <7>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>  <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>  <6>uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
>  <6>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>  <6>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb6: Product: UHCI Host Controller
>  <6>usb usb6: Manufacturer: Linux 2.6.29-6-default uhci_hcd
>  <6>usb usb6: SerialNumber: 0000:00:1d.1
>  <6>usb usb6: configuration #1 chosen from 1 choice
>  <6>hub 6-0:1.0: USB hub found
>  <6>hub 6-0:1.0: 2 ports detected
>  <6>uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
>  <7>  alloc irq_desc for 18 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <6>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>  <7>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>  <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>  <6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
>  <6>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>  <6>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>  <6>usb usb7: Product: UHCI Host Controller
>  <6>usb usb7: Manufacturer: Linux 2.6.29-6-default uhci_hcd
>  <6>usb usb7: SerialNumber: 0000:00:1d.2
>  <6>usb usb7: configuration #1 chosen from 1 choice
>  <6>hub 7-0:1.0: USB hub found
>  <6>hub 7-0:1.0: 2 ports detected
>  <4> sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
>  <5>sd 0:0:0:0: [sda] Attached SCSI disk
>  <6>usb 1-4: new high speed USB device using ehci_hcd and address 4
>  <6>md: linear personality registered for level -1
>  <6>usb 1-4: New USB device found, idVendor=04b3, idProduct=4485
>  <6>usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>  <6>usb 1-4: configuration #1 chosen from 1 choice
>  <6>hub 1-4:1.0: USB hub found
>  <6>hub 1-4:1.0: 4 ports detected
>  <4>bio: create slab <bio-1> at 1
>  <6>usb 2-1: new full speed USB device using uhci_hcd and address 2
>  <6>usb 2-1: New USB device found, idVendor=0a5c, idProduct=2110
>  <6>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>  <6>usb 2-1: Product: BCM2045B
>  <6>usb 2-1: Manufacturer: Broadcom Corp
>  <6>usb 2-1: configuration #1 chosen from 1 choice
>  <6>usb 2-2: new full speed USB device using uhci_hcd and address 3
>  <6>PM: Starting manual resume from disk
>  <6>usb 2-2: New USB device found, idVendor=0483, idProduct=2016
>  <6>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>  <6>usb 2-2: Product: Biometric Coprocessor
>  <6>usb 2-2: Manufacturer: STMicroelectronics
>  <6>usb 2-2: configuration #1 chosen from 1 choice
>  <6>usb 1-4.3: new low speed USB device using ehci_hcd and address 5
>  <6>usb 1-4.3: New USB device found, idVendor=046d, idProduct=c03e
>  <6>usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>  <6>usb 1-4.3: Product: USB-PS/2 Optical Mouse
>  <6>usb 1-4.3: Manufacturer: Logitech
>  <6>usb 1-4.3: configuration #1 chosen from 1 choice
>  <6>usbcore: registered new interface driver hiddev
>  <6>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input3
>  <6>generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.7-4.3/input0
>  <6>usbcore: registered new interface driver usbhid
>  <6>usbhid: v2.6:USB HID core driver
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on dm-2, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <4>JBD: barrier-based sync failed on dm-2 - disabling barriers
>  <7>preloadtrace: systemtap: 0.9.7/0.140, base: ffffffffa01de000, memory: 45292+76324+22256+14000 data+text+ctx+net, probes: 47
>  <6>udev: starting version 141
>  <6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>  <6>ACPI: Power Button (FF) [PWRF]
>  <6>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
>  <6>ACPI: Lid Switch [LID]
>  <6>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
>  <6>acpi device:08: registered as cooling_device2
>  <6>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/device:07/input/input7
>  <6>ACPI: Sleep Button (CM) [SLPB]
>  <6>ACPI: WMI: Mapper loaded
>  <6>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>  <4>nvidia: module license 'NVIDIA' taints kernel.
>  <6>nvidia 0000:01:00.0: power state changed by ACPI to D0
>  <6>nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>  <7>nvidia 0000:01:00.0: setting latency timer to 64
>  <6>e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
>  <6>e1000e: Copyright (c) 1999-2008 Intel Corporation.
>  <6>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>  <7>e1000e 0000:00:19.0: setting latency timer to 64
>  <7>  alloc irq_desc for 31 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <7>e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
>  <6>ACPI: Battery Slot [BAT0] (battery present)
>  <6>ACPI: AC Adapter [AC] (on-line)
>  <6>Bluetooth: Core ver 2.14
>  <6>NET: Registered protocol family 31
>  <6>Bluetooth: HCI device and connection manager initialized
>  <6>Bluetooth: HCI socket layer initialized
>  <4>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.14.17  Mon Feb 23 15:57:08 PST 2009
>  <6>Bluetooth: Generic Bluetooth USB driver ver 0.4
>  <6>usbcore: registered new interface driver btusb
>  <3>/*********************/
>  <3>Current EEPROM Checksum : 0x6aef
>  <3>Calculated              : 0x6aef
>  <3>Offset    Values
>  <3>========  ======
>  <3>00000000: 00 1a 6b d0 9c a7 00 08 ff ff 30 00 ff ff ff ff 
>  <3>00000010: ff ff ff ff c7 10 b9 20 aa 17 49 10 86 80 00 00 
>  <4>JBD: barrier-based sync failed on dm-2 - disabling barriers
>  <3>00000020: 01 0d 00 00 00 00 05 96 20 50 00 38 00 00 8b 0d 
>  <3>00000030: 02 06 c1 01 03 08 00 00 00 00 00 00 00 00 00 00 
>  <3>00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
>  <3>00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
>  <3>00000060: 00 01 00 40 2d 12 07 40 ff ff ff ff ff ff ff ff 
>  <3>00000070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ef 6a 
>  <3>/*********************/
>  <6>cfg80211: Calling CRDA to update world regulatory domain
>  <6>iTCO_vendor_support: vendor-support=0
>  <6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>  <6>iTCO_wdt: Found a ICH8M-E TCO device (Version=2, TCOBASE=0x1060)
>  <6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>  <5>sd 0:0:0:0: Attached scsi generic sg0 type 0
>  <5>sr 3:0:0:0: Attached scsi generic sg1 type 5
>  <4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <7>sr 3:0:0:0: Attached scsi CD-ROM sr0
>  <6>input: PC Speaker as /devices/platform/pcspkr/input/input8
>  <6>thinkpad_acpi: ThinkPad ACPI Extras v0.22
>  <6>thinkpad_acpi: http://ibm-acpi.sf.net/
>  <6>thinkpad_acpi: ThinkPad BIOS 7LETC5WW (2.25 ), EC 7KHT24WW-1.08
>  <6>thinkpad_acpi: Lenovo ThinkPad T61, model 766418G
>  <5>thinkpad_acpi: ACPI backlight control delay disabled
>  <6>thinkpad_acpi: radio switch found; radios are enabled
>  <6>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>  <5>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>  <5>thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
>  <5>thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
>  <6>Registered led device: tpacpi::thinklight
>  <6>Registered led device: tpacpi::power
>  <6>Registered led device: tpacpi:orange:batt
>  <6>Registered led device: tpacpi:green:batt
>  <6>Registered led device: tpacpi::dock_active
>  <6>Registered led device: tpacpi::bay_active
>  <6>Registered led device: tpacpi::dock_batt
>  <6>Registered led device: tpacpi::unknown_led
>  <6>Registered led device: tpacpi::standby
>  <5>thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
>  <6>input: ThinkPad Extra Buttons as /devices/virtual/input/input9
>  <6>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1a:6b:d0:9c:a7
>  <6>0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>  <6>0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
>  <6>yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
>  <6>parport_pc 00:0b: reported by Plug and Play ACPI
>  <6>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>  <6>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
>  <6>iwlagn: Copyright(c) 2003-2008 Intel Corporation
>  <6>cfg80211: World regulatory domain updated:
>  <6>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>  <6>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>  <6>yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c38, PCI irq 16
>  <6>yenta_cardbus 0000:15:00.0: Socket status: 30000006
>  <6>yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
>  <6>yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
>  <6>yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>  <6>ppdev: user-space parallel port driver
>  <6>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>  <6>iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>  <7>iwlagn 0000:03:00.0: setting latency timer to 64
>  <6>iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
>  <6>iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
>  <7>  alloc irq_desc for 32 on cpu 0 node 0
>  <7>  alloc kstat_irqs on cpu 0 node 0
>  <7>iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X
>  <6>wmaster0 (iwlagn): not using net_device_ops yet
>  <7>phy0: Selected rate control algorithm 'iwl-agn-rs'
>  <6>wlan0 (iwlagn): not using net_device_ops yet
>  <6>ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>  <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f8101000-f81017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>  <6>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>  <6>hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>  <7>HDA Intel 0000:00:1b.0: setting latency timer to 64
>  <7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00061b032a143ddb]
>  <6>Adding 3144912k swap on /dev/sda7.  Priority:-1 extents:1 across:3144912k 
>  <6>loop: module loaded
>  <4>EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on dm-0, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on dm-3, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <6>fuse init (API version 7.11)
>  <6>[    5.634146] usb 3-2: Manufacturer: STMicroelectronics
>  <7>[    5.983008] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00061b032a143ddb]
>  <6>[    7.020255] udev: starting version 141
>  <6>[    7.020527] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
>  <6>[    7.568847] Non-volatile memory driver v1.2
>  <6>[    7.693950] input: Power Button (FF) as /class/input/input3
>  <6>[    7.757037] ACPI: Power Button (FF) [PWRF]
>  <6>[    7.760068] input: Lid Switch as /class/input/input4
>  <7>[    7.774732] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
>  <7>[    7.774732] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
>  <6>[    7.774732] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
>  <6>[    7.792084] ACPI: Lid Switch [LID]
>  <6>[    7.792084] input: Sleep Button (CM) as /class/input/input5
>  <6>[    7.824944] input: PC Speaker as /class/input/input6
>  <6>[    7.855244] ACPI: Sleep Button (CM) [SLPB]
>  <6>[    7.856875] ACPI: AC Adapter [AC] (on-line)
>  <6>[    7.860973] Bluetooth: Core ver 2.11
>  <6>[    7.860993] NET: Registered protocol family 31
>  <6>[    7.860993] Bluetooth: HCI device and connection manager initialized
>  <6>[    7.860993] Bluetooth: HCI socket layer initialized
>  <6>[    7.902076] ACPI: Battery Slot [BAT0] (battery present)
>  <6>[    7.902208] ACPI: WMI: Mapper loaded
>  <6>[    8.158864] ACPI: device:03 is registered as cooling_device2
>  <6>[    8.159164] input: Video Bus as /class/input/input7
>  <6>[    8.209648] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>  <6>[    8.212939] ACPI: device:08 is registered as cooling_device3
>  <6>[    8.213218] input: Video Bus as /class/input/input8
>  <6>[    8.238789] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>  <6>[    8.318232] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>  <6>[    8.318232] serio: Synaptics pass-through port at isa0060/serio1/input0
>  <6>[    8.365164] input: SynPS/2 Synaptics TouchPad as /class/input/input9
>  <7>[    8.405575] pnp: the driver 'parport_pc' has been registered
>  <6>[    8.405575] parport_pc 00:0b: reported by Plug and Play ACPI
>  <6>[    8.405801] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>  <6>[    8.496102] Bluetooth: HCI USB driver ver 2.9
>  <6>[    8.499578] usbcore: registered new interface driver hci_usb
>  <7>[    8.506434] parport_pc 00:0b: driver attached
>  <6>[    8.626234] thinkpad_acpi: ThinkPad ACPI Extras v0.20
>  <6>[    8.626234] thinkpad_acpi: http://ibm-acpi.sf.net/
>  <6>[    8.626234] thinkpad_acpi: ThinkPad BIOS 7LETC5WW (2.25 ), EC 7KHT24WW-1.08
>  <6>[    8.626234] thinkpad_acpi: Lenovo ThinkPad T61, model 766418G
>  <6>[    8.626234] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
>  <6>[    8.626297] thinkpad_acpi: radio switch found; radios are enabled
>  <6>[    8.626297] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>  <5>[    8.626297] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>  <6>[    8.631595] Registered led device: tpacpi::thinklight
>  <6>[    8.631755] Registered led device: tpacpi::power
>  <6>[    8.631884] Registered led device: tpacpi:orange:batt
>  <6>[    8.632013] Registered led device: tpacpi:green:batt
>  <6>[    8.632154] Registered led device: tpacpi::dock_active
>  <6>[    8.632280] Registered led device: tpacpi::bay_active
>  <6>[    8.632405] Registered led device: tpacpi::dock_batt
>  <6>[    8.632532] Registered led device: tpacpi::unknown_led
>  <6>[    8.632658] Registered led device: tpacpi::standby
>  <6>[    8.637352] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
>  <5>[    8.638196] thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode
>  <5>[    8.638196] thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
>  <6>[    8.638196] input: ThinkPad Extra Buttons as /class/input/input10
>  <6>[    8.765766] Yenta: ISA IRQ mask 0x0438, PCI irq 16
>  <6>[    8.765894] Socket status: 30000006
>  <6>[    8.766027] pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
>  <6>[    8.766141] pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
>  <6>[    8.766255] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>  <6>[    8.875069] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26ks
>  <6>[    8.875069] iwl4965: Copyright(c) 2003-2008 Intel Corporation
>  <6>[    8.875069] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>  <7>[    8.875069] PCI: Setting latency timer of device 0000:03:00.0 to 64
>  <6>[    8.875069] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>  <6>[    8.927688] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
>  <7>[    8.927688] phy0: Selected rate control algorithm 'iwl-4965-rs'
>  <6>[    9.008292] ACPI: PCI interrupt for device 0000:03:00.0 disabled
>  <6>[    9.008470] input: 4965AGN as /class/input/input11
>  <6>[    9.108979] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>  <6>[    9.108979] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
>  <7>[    9.108979] PCI: Setting latency timer of device 0000:00:1b.0 to 64
>  <6>[   11.379233] Adding 3144912k swap on /dev/sda7.  Priority:-1 extents:1 across:3144912k
>  <6>[   11.779781] EXT3 FS on dm-1, internal journal
>  <6>[   12.443205] loop: module loaded
>  <6>[   14.256286] IBM TrackPoint firmware: 0x0e, buttons: 3/3
>  <6>[   14.497746] input: TPPS/2 IBM TrackPoint as /class/input/input12
>  <4>[   14.765866] fuse init (API version 7.9)
>  <6>[   14.923589] kjournald starting.  Commit interval 5 seconds
>  <6>[   14.923805] EXT3 FS on dm-0, internal journal
>  <6>[   14.923805] EXT3-fs: mounted filesystem with ordered data mode.
>  <4>[   14.942488] CE: hpet increasing min_delta_ns to 15000 nsec
>  <6>[   14.963350] kjournald starting.  Commit interval 5 seconds
>  <6>[   14.963401] EXT3 FS on dm-3, internal journal
>  <6>[   14.963401] EXT3-fs: mounted filesystem with ordered data mode.
>  <6>[   14.989663] kjournald starting.  Commit interval 5 seconds
>  <6>[   14.991784] EXT3 FS on dm-2, internal journal
>  <6>[   14.991784] EXT3-fs: mounted filesystem with ordered data mode.
>  <6>[   18.464407] NET: Registered protocol family 10
>  <6>[   18.464407] lo: Disabled Privacy Extensions
>  <6>[   18.464407] ADDRCONF(NETDEV_UP): eth0: link is not ready
>  <6>[   19.764977] tun: Universal TUN/TAP device driver, 1.6
>  <6>[   19.765123] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>  <6>[   19.768866] tun0: Disabled Privacy Extensions
>  <6>[   20.006121] eth0: Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>  <6>[   20.008455] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>  <6>[   24.213674] Bluetooth: L2CAP ver 2.9
>  <6>[   24.213674] Bluetooth: L2CAP socket layer initialized
>  <6>[   24.456221] Bluetooth: RFCOMM socket layer initialized
>  <6>[   24.456376] Bluetooth: RFCOMM TTY layer initialized
>  <6>[   24.456502] Bluetooth: RFCOMM ver 1.8
>  <6>[   26.200290] lp0: using parport0 (interrupt-driven).
>  <6>[   26.249025] ppdev: user-space parallel port driver
>  <6>[   29.433526] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>  <7>[   29.434353] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 40100102, writing 40100106)
>  <6>[   29.434353] firmware: requesting iwlwifi-4965-1.ucode
>  <6>[   29.760466] Registered led device: iwl-phy0:radio
>  <6>[   29.760466] Registered led device: iwl-phy0:assoc
>  <6>[   29.760466] Registered led device: iwl-phy0:RX
>  <6>[   29.760466] Registered led device: iwl-phy0:TX
>  <6>[   29.823493] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>  <7>[   33.469112] wlan0: Initial auth_alg=0
>  <7>[   33.469112] wlan0: authenticate with AP 00:1a:1e:a6:f9:88
>  <7>[   33.469436] wlan0: RX authentication from 00:1a:1e:a6:f9:88 (alg=0 transaction=2 status=0)
>  <7>[   33.469436] wlan0: authenticated
>  <7>[   33.469436] wlan0: associate with AP 00:1a:1e:a6:f9:88
>  <7>[   33.474187] wlan0: RX AssocResp from 00:1a:1e:a6:f9:88 (capab=0x401 status=0 aid=1)
>  <7>[   33.474187] wlan0: associated
>  <6>[   33.490422] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>  <7>[   33.490422] wlan0: disassociate(reason=3)
>  <7>[   43.607813] wlan0: no IPv6 routers present
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/modprobe parport " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>----- /proc/interrupts end -----
>----- /proc/dma -----
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x0
>  klog mem 0: 0xbb4a6000
>  klog mem 1: 0x0
>  klog mem:   0xbb4a6000
> -- <6> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> -- <6> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> -- <6> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> -- <6> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> -- <6> BIOS-e820: 0000000000100000 - 00000000beeb0000 (usable)
> -- <6> BIOS-e820: 00000000beeb0000 - 00000000beecc000 (ACPI data)
> -- <6> BIOS-e820: 00000000beecc000 - 00000000bef00000 (ACPI NVS)
> -- <6> BIOS-e820: 00000000bef00000 - 00000000bf000000 (reserved)
> -- <6> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> -- <6> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> -- <6> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> -- <6> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> -- <6> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> -- <6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> -- <6> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> -- <6>DMI present.
>  bios mem:   0xbee4d800
>  meminfo:    0x0
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0x0000000000000000) -----
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>sysfs: no such bus: pci
>---------- PCI raw data ----------
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> pci.3: macio
>sysfs: no such bus: macio
>>> pci.4: vio
>sysfs: no such bus: vio
>>> pci.5: xen
>sysfs: no such bus: xen
>>> pci.6: ps3
>sysfs: no such bus: ps3_system_bus
>>> pci.7: platform
>sysfs: no such bus: platform
>>> pci.8: of_platform
>sysfs: no such bus: of_platform
>>> pci.9: vm
>sysfs: no such bus: vm
>>> pci.10: virtio
>sysfs: no such bus: virtio
>>> pci.11: ibmebus
>sysfs: no such bus: ibmebus
>>> monitor.1: ddc
>>> monitor.2: bios
>>> monitor.3: pci
>>> monitor.4: internal db
>>> monitor.5: prom
>>> pcmcia.1: sysfs drivers
>----- sysfs driver list (id 0x0000000000000000) -----
>----- sysfs driver list end -----
>>> pcmcia.2: pcmcia
>sysfs: no such bus: pcmcia
>>> pcmcia.3: pcmcia ctrl
>sysfs: no such class: pcmcia_socket
>>> serial.1: read info
>----- serial info -----
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/modprobe parport_pc" -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>----- exec: "/sbin/modprobe lp" -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>----- exec: "/sbin/modprobe ide-cd_mod " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>----- exec: "/sbin/modprobe ide-disk " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>----- exec: "/sbin/modprobe sr_mod " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>----- exec: "/sbin/modprobe sd_mod " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>----- exec: "/sbin/modprobe st " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>>> block.2: sysfs drivers
>----- sysfs driver list (id 0x0000000000000000) -----
>----- sysfs driver list end -----
>>> block.3: cdrom
>>> block.4: partition
>>> block.5: get sysfs block dev data
>-----  lsscsi -----
>-----  lsscsi end -----
>sysfs: no such class: block
>>> scsi.1: scsi modules
>----- exec: "/sbin/modprobe sg " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>>> scsi.2: scsi tape
>sysfs: no such class: scsi_tape
>>> scsi.3: scsi generic
>sysfs: no such class: scsi_generic
>>> usb.1: sysfs drivers
>----- sysfs driver list (id 0x0000000000000000) -----
>----- sysfs driver list end -----
>>> usb.2: usb
>sysfs: no such bus: usb
>>> usb.3.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>>> usb.3.3: input
>sysfs: no such class: input
>>> usb.3.4: lp
>sysfs: no such class: usb
>>> usb.3.5: serial
>sysfs: no such class: tty
>>> edd.1: edd mod
>----- exec: "/sbin/modprobe edd " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>>> edd.2: edd info
>>> modem.1: serial
>******  started child process 4271 (15s/120s)  ******
>******  stopped child process 4271 (120s)  ******
>>> mouse.2: serial
>******  started child process 4272 (20s/20s)  ******
>******  stopped child process 4272 (20s)  ******
>>> input.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  WARNING: All config files need .conf: /etc/modprobe.d/pam_fp-uinput, it will be ignored in a future release.
>  FATAL: Could not load /lib/modules/2.6.26-2-amd64/modules.dep: No such file or directory
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>----- /proc/bus/input/devices end -----
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>>> fb.1: read info
>>> net.1: get network data
>sysfs: no such class: net
>>> pppoe.1: looking for pppoe
>>> wlan.1: detecting wlan features
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4: floppy
>>> int.5: edd
>>> int.5.1: bios
>>> int.6: mouse
>>> int.15: system info
>  system type:
>  acpi: 0
>>> int.7: hdb
>>> int.7.1: modules
>----- sysfs driver list (id 0x0000000000000000) -----
>----- sysfs driver list end -----
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>-----  udevinfo end -----
>>> int.13: device names
>>> int.14: soft raid
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.lZF+r4EgHp4 (failed)
>  old prop read: rdCR.lZF+r4EgHp4 (failed)
>  prop read: rdCR.n_7QNeEnh23 (ok)
>  prop read: rdCR.CxwsZFjVASF (failed)
>  old prop read: rdCR.CxwsZFjVASF (failed)
>----- /proc/modules -----
>----- /proc/modules end -----
>  used irqs:
>=========== end debug info ============
>01: None 00.0: 10105 BIOS
>  [Created at bios.190]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: off
>    Caps Lock: off
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>02: None 00.0: 10107 System
>  [Created at sys.63]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>03: None 00.0: 10102 Main Memory
>  [Created at memory.61]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0xbee4d7ff (rw)
>  Memory Size: 3 GB
>  Config Status: cfg=new, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 505670: 293325 | 293328 | 293329