Attachment 316990 Details for Bug 536549

output of dmesg

dmesg.txt (text/plain), 45.77 KB, created by Yorck-Fabian Beensen on 2009-09-07 08:35:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Yorck-Fabian Beensen

Created: 2009-09-07 08:35:22 UTC

Size: 45.77 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27.29-0.1-default (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-08-15 17:53:59 +0200
>Command line: root=/dev/disk/by-id/ata-ST3160815AS_9RA3H7KL-part2 splash=silent console=tty0 vga=0x31a
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
> BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
> BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
> BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>DMI 2.4 present.
>AMI BIOS detected: BIOS may corrupt low RAM, working it around.
>last_pfn = 0x130000 max_arch_pfn = 0x100000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0xcff80 max_arch_pfn = 0x100000000
>init_memory_mapping
> 0000000000 - 00cfe00000 page 2M
> 00cfe00000 - 00cff80000 page 4k
>kernel direct mapping tables up to cff80000 @ 10000-16000
>last_map_addr: cff80000 end: cff80000
>init_memory_mapping
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ 14000-1a000
>last_map_addr: 130000000 end: 130000000
>RAMDISK: 37a31000 - 37feffe2
>ACPI: RSDP 000FBB80, 0024 (r2 ACPIAM)
>ACPI: XSDT CFF80100, 0054 (r1 A_M_I_ OEMXSDT   9000712 MSFT       97)
>ACPI: FACP CFF80290, 00F4 (r3 A_M_I_ OEMFACP   9000712 MSFT       97)
>ACPI: DSDT CFF805C0, 8DF3 (r1  A0812 A0812001        1 INTL 20060113)
>ACPI: FACS CFF8E000, 0040
>ACPI: APIC CFF80390, 006C (r1 A_M_I_ OEMAPIC   9000712 MSFT       97)
>ACPI: MCFG CFF80400, 003C (r1 A_M_I_ OEMMCFG   9000712 MSFT       97)
>ACPI: OEMB CFF8E040, 0081 (r1 A_M_I_ AMI_OEM   9000712 MSFT       97)
>ACPI: HPET CFF893C0, 0038 (r1 A_M_I_ OEMHPET   9000712 MSFT       97)
>ACPI: OSFR CFF89400, 00B0 (r1 A_M_I_ OEMOSFR   9000712 MSFT       97)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Bootmem setup node 0 0000000000000000-0000000130000000
>  NODE_DATA [0000000000015000 - 000000000002cfff]
>  bootmap [000000000002d000 -  0000000000052fff] pages 26
>(7 early reservations) ==> bootmem [0000000000 - 0130000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000bcc8b8]    TEXT DATA BSS ==> [0000200000 - 0000bcc8b8]
>  #3 [0037a31000 - 0037feffe2]          RAMDISK ==> [0037a31000 - 0037feffe2]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
>  #6 [0000014000 - 0000015000]          PGTABLE ==> [0000014000 - 0000015000]
>found SMP MP-table at [ffff8800000ff780] 000ff780
> [ffffe20000000000-ffffe20004bfffff] PMD -> [ffff880028200000-ffff88002c1fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000cff80
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1048335
>  DMA zone: 1305 pages, LIFO batch:0
>  DMA32 zone: 831424 pages, LIFO batch:31
>  Normal zone: 193536 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: HPET id: 0xffffffff base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
>PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
>PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
>PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
>PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
>Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
>PERCPU: Allocating 61472 bytes of per cpu data
>NR_CPUS: 512, nr_cpu_ids: 4, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1026265
>Policy zone: Normal
>Kernel command line: root=/dev/disk/by-id/ata-ST3160815AS_9RA3H7KL-part2 splash=silent console=tty0 vga=0x31a
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 2405.435 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x20000000 - 0x24000000
>Memory: 4045192k/4980736k available (2703k kernel code, 148148k reserved, 3168k data, 792k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4810.87 BogoMIPS (lpj=9621740)
>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
>Security Framework initialized
>AppArmor: AppArmor initialized
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20080609
>ACPI: Checking initramfs for custom DSDT
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 994 Objects with 76 Devices 281 Methods 35 Regions
> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>Using local APIC timer interrupts.
>APIC timer calibration result 16704438
>Detected 16.704 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4810.88 BogoMIPS (lpj=9621776)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2/2 ip 6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4810.91 BogoMIPS (lpj=9621834)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 2/2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU2: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#1 -> CPU#2]: passed.
>Booting processor 3/3 ip 6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4777.94 BogoMIPS (lpj=9555882)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 3/3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU3: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
>CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#2 -> CPU#3]: passed.
>Brought up 4 CPUs
>Total of 4 processors activated (19210.61 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-3 level CPU
>   groups: 0-1 2-3
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-3 level CPU
>   groups: 0-1 2-3
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU2 attaching sched-domain:
> domain 0: span 2-3 level MC
>  groups: 2 3
>  domain 1: span 0-3 level CPU
>   groups: 2-3 0-1
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU3 attaching sched-domain:
> domain 0: span 2-3 level MC
>  groups: 3 2
>  domain 1: span 0-3 level CPU
>   groups: 2-3 0-1
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>net_namespace: 1936 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>perfmon: version 2.82
>perfmon: CPU hotplug support enabled
>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:.................................................................................................................................................................................................................
>Initialized 27/35 Regions 44/44 Fields 48/48 Buffers 90/91 Packages (1003 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:.
>Executed 1 _INI methods requiring 1 _STA executions (examined 82 objects)
>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 12 Wake, Enabled 2 Runtime GPEs in this block
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>PCI: 0000:00:1a.0 reg 20 io port: [b800, b81f]
>PCI: 0000:00:1a.1 reg 20 io port: [b880, b89f]
>PCI: 0000:00:1a.2 reg 20 io port: [bc00, bc1f]
>PCI: 0000:00:1a.7 reg 10 32bit mmio: [f9fffc00, f9ffffff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>PCI: 0000:00:1b.0 reg 10 64bit mmio: [f9ff8000, f9ffbfff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>PCI: 0000:00:1d.0 reg 20 io port: [b080, b09f]
>PCI: 0000:00:1d.1 reg 20 io port: [b400, b41f]
>PCI: 0000:00:1d.2 reg 20 io port: [b480, b49f]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [f9fff800, f9fffbff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: 0000:00:1f.2 reg 10 io port: [a000, a007]
>PCI: 0000:00:1f.2 reg 14 io port: [9c00, 9c03]
>PCI: 0000:00:1f.2 reg 18 io port: [9880, 9887]
>PCI: 0000:00:1f.2 reg 1c io port: [9800, 9803]
>PCI: 0000:00:1f.2 reg 20 io port: [9480, 948f]
>PCI: 0000:00:1f.2 reg 24 io port: [9400, 940f]
>PCI: 0000:00:1f.3 reg 10 64bit mmio: [f9fff400, f9fff4ff]
>PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
>PCI: 0000:00:1f.5 reg 10 io port: [b000, b007]
>PCI: 0000:00:1f.5 reg 14 io port: [ac00, ac03]
>PCI: 0000:00:1f.5 reg 18 io port: [a880, a887]
>PCI: 0000:00:1f.5 reg 1c io port: [a800, a803]
>PCI: 0000:00:1f.5 reg 20 io port: [a480, a48f]
>PCI: 0000:00:1f.5 reg 24 io port: [a400, a40f]
>PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
>PCI: 0000:01:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
>PCI: 0000:01:00.0 reg 1c 64bit mmio: [fa000000, fbffffff]
>PCI: 0000:01:00.0 reg 24 io port: [cc00, cc7f]
>PCI: 0000:01:00.0 reg 30 32bit mmio: [fe8e0000, fe8fffff]
>PCI: bridge 0000:00:01.0 io port: [c000, cfff]
>PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, fe8fffff]
>PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
>PCI: bridge 0000:00:1c.0 64bit mmio pref: [f8f00000, f8ffffff]
>PCI: 0000:03:00.0 reg 24 32bit mmio: [feafe000, feafffff]
>PCI: 0000:03:00.0 reg 30 32bit mmio: [0, ffff]
>pci 0000:03:00.0: PME# supported from D3hot
>pci 0000:03:00.0: PME# disabled
>PCI: 0000:03:00.1 reg 10 io port: [ec00, ec07]
>PCI: 0000:03:00.1 reg 14 io port: [e880, e883]
>PCI: 0000:03:00.1 reg 18 io port: [e800, e807]
>PCI: 0000:03:00.1 reg 1c io port: [e480, e483]
>PCI: 0000:03:00.1 reg 20 io port: [e400, e40f]
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.4. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:1c.4 io port: [e000, efff]
>PCI: bridge 0000:00:1c.4 32bit mmio: [fea00000, feafffff]
>PCI: 0000:02:00.0 reg 10 64bit mmio: [fe9fc000, fe9fffff]
>PCI: 0000:02:00.0 reg 18 io port: [d800, d8ff]
>PCI: 0000:02:00.0 reg 30 32bit mmio: [fe9c0000, fe9dffff]
>pci 0000:02:00.0: supports D1
>pci 0000:02:00.0: supports D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>PCI: bridge 0000:00:1c.5 io port: [d000, dfff]
>PCI: bridge 0000:00:1c.5 32bit mmio: [fe900000, fe9fffff]
>PCI: 0000:05:01.0 reg 10 32bit mmio: [febfd000, febfdfff]
>pci 0000:05:01.0: supports D1
>pci 0000:05:01.0: supports D2
>pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:05:01.0: PME# disabled
>PCI: 0000:05:01.1 reg 10 32bit mmio: [febfe000, febfefff]
>pci 0000:05:01.1: supports D1
>pci 0000:05:01.1: supports D2
>pci 0000:05:01.1: PME# supported from D0 D1 D2 D3hot
>pci 0000:05:01.1: PME# disabled
>PCI: 0000:05:01.2 reg 10 32bit mmio: [febffc00, febffcff]
>pci 0000:05:01.2: supports D1
>pci 0000:05:01.2: supports D2
>pci 0000:05:01.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:05:01.2: PME# disabled
>PCI: 0000:05:03.0 reg 10 32bit mmio: [febfc000, febfcfff]
>pci 0000:05:03.0: supports D1
>pci 0000:05:03.0: supports D2
>pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:05:03.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>PCI: bridge 0000:00:1e.0 32bit mmio: [feb00000, febfffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 8C, should be 83 [20080609]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>AppArmor: AppArmor Filesystem Enabled
>ACPI: RTC can wake from S4
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 1
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:07: ioport range 0x290-0x297 has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:08: iomem range 0xffa00000-0xffafffff has been reserved
>system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
>system 00:08: iomem range 0xffe00000-0xffefffff could not be reserved
>system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xcffff has been reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xc000-0xcfff
>pci 0000:00:01.0:   MEM window: 0xfa000000-0xfe8fffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: disabled
>pci 0000:00:1c.0:   PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.4:   IO window: 0xe000-0xefff
>pci 0000:00:1c.4:   MEM window: 0xfea00000-0xfeafffff
>pci 0000:00:1c.4:   PREFETCH window: 0x000000f0000000-0x000000f00fffff
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.5:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.5:   MEM window: 0xfe900000-0xfe9fffff
>pci 0000:00:1c.5:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xfeb00000-0xfebfffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [c000, cfff]
>bus: 01 index 1 mmio: [fa000000, fe8fffff]
>bus: 01 index 2 mmio: [d0000000, dfffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 04 index 0 mmio: [0, 0]
>bus: 04 index 1 mmio: [0, 0]
>bus: 04 index 2 mmio: [f8f00000, f8ffffff]
>bus: 04 index 3 mmio: [0, 0]
>bus: 03 index 0 io port: [e000, efff]
>bus: 03 index 1 mmio: [fea00000, feafffff]
>bus: 03 index 2 mmio: [f0000000, f00fffff]
>bus: 03 index 3 mmio: [0, 0]
>bus: 02 index 0 io port: [d000, dfff]
>bus: 02 index 1 mmio: [fe900000, fe9fffff]
>bus: 02 index 2 mmio: [0, 0]
>bus: 02 index 3 mmio: [0, 0]
>bus: 05 index 0 mmio: [0, 0]
>bus: 05 index 1 mmio: [feb00000, febfffff]
>bus: 05 index 2 mmio: [0, 0]
>bus: 05 index 3 io port: [0, ffff]
>bus: 05 index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs... done
>Freeing initrd memory: 5883k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1252065273.876:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 1978
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>perfmon: added sampling format default
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: found MSI capability
>pci_express 0000:00:01.0:pcie00: allocate port service
>pci_express 0000:00:01.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.4: setting latency timer to 64
>pcieport-driver 0000:00:1c.4: found MSI capability
>pci_express 0000:00:1c.4:pcie00: allocate port service
>pci_express 0000:00:1c.4:pcie02: allocate port service
>pci_express 0000:00:1c.4:pcie03: allocate port service
>pcieport-driver 0000:00:1c.5: setting latency timer to 64
>pcieport-driver 0000:00:1c.5: found MSI capability
>pci_express 0000:00:1c.5:pcie00: allocate port service
>pci_express 0000:00:1c.5:pcie02: allocate port service
>pci_express 0000:00:1c.5:pcie03: allocate port service
>vesafb: framebuffer at 0xfb000000, mapped to 0xffffc20011100000, using 10240k, total 14336k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 113709 bytes
>bootsplash: ...found (1280x1024, 43709 bytes, v3).
>Console: switching to colour frame buffer device 156x60
>fb0: VESA VGA frame buffer device
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver8 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>registered taskstats version 1
>Freeing unused kernel memory: 792k freed
>Write protecting the kernel read-only data: 4940k
>ACPI: No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ahci 0000:03:00.0: version 3.0
>vendor=8086 device=2948
>ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ahci 0000:03:00.0: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
>ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
>ata1: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
>ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
>ata3.00: SATA link down (SStatus 0 SControl 300)
>ata3.01: SATA link down (SStatus 0 SControl 300)
>ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.01: SATA link down (SStatus 0 SControl 300)
>ata4.00: ATA-7: ST3160815AS, 3.AAD, max UDMA/133
>ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>scsi 3:0:0:0: Direct-Access     ATA      ST3160815AS      3.AA PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ata_piix 0000:00:1f.5: setting latency timer to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
>ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATAPI: ATAPI   DVD D  DH16D2S, EP52, max UDMA/100
>ata5.00: configured for UDMA/100
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata6.00: ATAPI: ASUS    DRW-1814BLT, 1.13, max UDMA/66
>ata6.00: configured for UDMA/66
>scsi 4:0:0:0: CD-ROM            ATAPI    DVD D  DH16D2S   EP52 PQ: 0 ANSI: 5
>scsi 5:0:0:0: CD-ROM            ASUS     DRW-1814BLT      1.13 PQ: 0 ANSI: 5
>ACPI: SSDT CFF8E0D0, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
>Parsing all Control Methods:
>Table [SSDT](id 0017) - 9 Objects with 0 Devices 3 Methods 0 Regions
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: SSDT CFF8E2B0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
>Parsing all Control Methods:
>Table [SSDT](id 001A) - 7 Objects with 0 Devices 4 Methods 0 Regions
>processor ACPI_CPU:01: registered as cooling_device1
>ACPI: SSDT CFF8E400, 0143 (r1    AMI   CPU3PM        1 INTL 20060113)
>Parsing all Control Methods:
>Table [SSDT](id 001D) - 7 Objects with 0 Devices 4 Methods 0 Regions
>processor ACPI_CPU:02: registered as cooling_device2
>ACPI: SSDT CFF8E550, 0143 (r1    AMI   CPU4PM        1 INTL 20060113)
>Parsing all Control Methods:
>Table [SSDT](id 0020) - 7 Objects with 0 Devices 4 Methods 0 Regions
>processor ACPI_CPU:03: registered as cooling_device3
>Uniform Multi-Platform E-IDE driver
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
>vendor=8086 device=2948
>pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pata_jmicron 0000:03:00.1: setting latency timer to 64
>scsi6 : pata_jmicron
>scsi7 : pata_jmicron
>ata7: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
>ata8: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
>udevd version 128 started
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
>sd 3:0:0:0: [sda] Write Protect is off
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
>vendor=8086 device=244e
>sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
>sd 3:0:0:0: [sda] Write Protect is off
>sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>ohci_hcd 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:05:01.0: OHCI Host Controller
>ohci_hcd 0000:05:01.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:05:01.0: irq 17, io mem 0xfebfd000
> sda1 sda2 sda3
>sd 3:0:0:0: [sda] Attached SCSI disk
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>USB Universal Host Controller Interface driver v3.0
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27.29-0.1-default ohci_hcd
>usb usb1: SerialNumber: 0000:05:01.0
>vendor=8086 device=244e
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd 0000:05:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:05:01.1: OHCI Host Controller
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27.29-0.1-default ehci_hcd
>usb usb2: SerialNumber: 0000:00:1a.7
>ohci_hcd 0000:05:01.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd 0000:05:01.1: irq 18, io mem 0xfebfe000
>usb 2-2: new high speed USB device using ehci_hcd and address 2
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27.29-0.1-default uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.0
>usb 2-2: configuration #1 chosen from 1 choice
>usb 2-2: New USB device found, idVendor=058f, idProduct=6362
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-2: Product: Mass Storage Device
>usb 2-2: Manufacturer: Generic
>usb 2-2: SerialNumber: 058F312D81B
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>usb 2-3: new high speed USB device using ehci_hcd and address 3
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27.29-0.1-default ohci_hcd
>usb usb3: SerialNumber: 0000:05:01.1
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-3: configuration #1 chosen from 1 choice
>usb 2-3: New USB device found, idVendor=0bda, idProduct=8187
>usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-3: Product: RTL8187_Wireless
>usb 2-3: Manufacturer: Manufacturer_Realtek_RTL8187_
>usb 2-3: SerialNumber: 0015AF3E7ADA
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27.29-0.1-default uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.1
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.27.29-0.1-default uhci_hcd
>usb usb6: SerialNumber: 0000:00:1a.2
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.27.29-0.1-default ehci_hcd
>usb usb7: SerialNumber: 0000:00:1d.7
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb 7-1: new high speed USB device using ehci_hcd and address 2
>usb 7-1: configuration #1 chosen from 1 choice
>hub 7-1:1.0: USB hub found
>hub 7-1:1.0: 4 ports detected
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.27.29-0.1-default uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
>usb usb9: configuration #1 chosen from 1 choice
>hub 9-0:1.0: USB hub found
>hub 9-0:1.0: 2 ports detected
>usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb9: Product: UHCI Host Controller
>usb usb9: Manufacturer: Linux 2.6.27.29-0.1-default uhci_hcd
>usb usb9: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
>usb 7-1: New USB device found, idVendor=05e3, idProduct=0608
>usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 7-1: Product: USB2.0 Hub
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
>usb usb10: configuration #1 chosen from 1 choice
>hub 10-0:1.0: USB hub found
>hub 10-0:1.0: 2 ports detected
>usb 7-1.1: new low speed USB device using ehci_hcd and address 3
>usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb10: Product: UHCI Host Controller
>usb usb10: Manufacturer: Linux 2.6.27.29-0.1-default uhci_hcd
>usb usb10: SerialNumber: 0000:00:1d.2
>vendor=8086 device=244e
>ehci_hcd 0000:05:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:05:01.2: EHCI Host Controller
>ehci_hcd 0000:05:01.2: new USB bus registered, assigned bus number 11
>usb 7-1.1: configuration #1 chosen from 1 choice
>usb 7-1.1: New USB device found, idVendor=10d5, idProduct=5000
>usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 7-1.1: Product: Combo Free KVM
>usb 7-1.1: Manufacturer: No brand
>ehci_hcd 0000:05:01.2: irq 19, io mem 0xfebffc00
>ehci_hcd 0000:05:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb11: configuration #1 chosen from 1 choice
>hub 11-0:1.0: USB hub found
>hub 11-0:1.0: 5 ports detected
>usb usb11: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb11: Product: EHCI Host Controller
>usb usb11: Manufacturer: Linux 2.6.27.29-0.1-default ehci_hcd
>usb usb11: SerialNumber: 0000:05:01.2
>usbcore: registered new interface driver hiddev
>input: No brand Combo Free KVM as /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.1/7-1.1:1.0/input/input0
>input,hidraw0: USB HID v1.10 Keyboard [No brand Combo Free KVM] on usb-0000:00:1d.7-1.1
>input: No brand Combo Free KVM as /devices/pci0000:00/0000:00:1d.7/usb7/7-1/7-1.1/7-1.1:1.1/input/input1
>input,hidraw1: USB HID v1.10 Mouse [No brand Combo Free KVM] on usb-0000:00:1d.7-1.1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>udevd version 128 started
>sd 3:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>scsi 5:0:0:0: Attached scsi generic sg2 type 5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>vendor=8086 device=294a
>sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sky2 0000:02:00.0: setting latency timer to 64
>sky2 0000:02:00.0: v1.22 addr 0xfe9fc000 irq 17 Yukon-2 EC Ultra rev 2
>sky2 eth0: addr 00:1d:60:e7:d1:02
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, hpet irqs
>iTCO_vendor_support: vendor-support=0
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 5:0:0:0: Attached scsi CD-ROM sr1
>iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: Power Button (CM) [PWRB]
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
>ACPI: Device needs an ACPI driver
>vendor=8086 device=244e
>ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[febfc000-febfc7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
>scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 8:0:0:0: [sdb] Attached SCSI removable disk
>sd 8:0:0:0: Attached scsi generic sg3 type 0
>scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 8:0:0:1: [sdc] Attached SCSI removable disk
>sd 8:0:0:1: Attached scsi generic sg4 type 0
>scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 8:0:0:2: [sdd] Attached SCSI removable disk
>sd 8:0:0:2: Attached scsi generic sg5 type 0
>scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 8:0:0:3: [sde] Attached SCSI removable disk
>sd 8:0:0:3: Attached scsi generic sg6 type 0
>usb-storage: device scan complete
>nvidia: module license 'NVIDIA' taints kernel.
>vendor=8086 device=29c1
>nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nvidia 0000:01:00.0: setting latency timer to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  185.18.36  Fri Aug 14 17:35:21 PDT 2009
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>phy0: Selected rate control algorithm 'pid'
>phy0: hwaddr 00:15:af:3e:7a:da, RTL8187vB (default) V1 + rtl8225z2
>usbcore: registered new interface driver rtl8187
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800018ef20d]
>Adding 4200956k swap on /dev/sda1.  Priority:-1 extents:1 across:4200956k
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>loop: module loaded
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>type=1505 audit(1252065291.212:2): operation="profile_load" name="/bin/ping" name2="default" pid=2463
>type=1505 audit(1252065291.244:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=2503
>type=1505 audit(1252065291.296:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=2513
>type=1505 audit(1252065291.420:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=2525
>type=1505 audit(1252065291.468:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=2526
>type=1505 audit(1252065291.516:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=2527
>type=1505 audit(1252065291.560:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=2528
>type=1505 audit(1252065291.632:9): operation="profile_load" name="/usr/sbin/named" name2="default" pid=2529
>type=1505 audit(1252065291.692:10): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=2530
>type=1505 audit(1252065291.764:11): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=2531
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>firmware: requesting intel-ucode/06-0f-0b
>sky2 eth0: enabling interface
>firmware: requesting intel-ucode/06-0f-0b
>firmware: requesting intel-ucode/06-0f-0b
>firmware: requesting intel-ucode/06-0f-0b
>NET: Registered protocol family 17
>microcode: CPU0 updated from revision 0xb3 to 0xb6, date = 07132007 
>microcode: CPU1 updated from revision 0xb3 to 0xb6, date = 07132007 
>microcode: CPU2 updated from revision 0xb3 to 0xb6, date = 07132007 
>microcode: CPU3 updated from revision 0xb3 to 0xb6, date = 07132007 
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 4 processor cores.
>vboxdrv: fAsync=0 offMin=0x252 offMax=0x197d
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 2.0.6_OSE (interface 0x00090000).
>eth0: no IPv6 routers present
>VMware memory control driver initialized
>vmmemctl: started kernel thread pid=4569
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU2 attaching NULL sched-domain.
>CPU3 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-3 level CPU
>   groups: 0-1 2-3
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-3 level CPU
>   groups: 0-1 2-3
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU2 attaching sched-domain:
> domain 0: span 2-3 level MC
>  groups: 2 3
>  domain 1: span 0-3 level CPU
>   groups: 2-3 0-1
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU3 attaching sched-domain:
> domain 0: span 2-3 level MC
>  groups: 3 2
>  domain 1: span 0-3 level CPU
>   groups: 2-3 0-1
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>__ratelimit: 3 callbacks suppressed
>nepomukservices[5364] general protection ip:7f232547a3d6 sp:7fff1ec72bb0 error:0 in librdf.so.0.0.0[7f2325466000+3c000]
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU2 attaching NULL sched-domain.
>CPU3 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-3 level CPU
>   groups: 0-1 2-3
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-3 level CPU
>   groups: 0-1 2-3
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU2 attaching sched-domain:
> domain 0: span 2-3 level MC
>  groups: 2 3
>  domain 1: span 0-3 level CPU
>   groups: 2-3 0-1
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU3 attaching sched-domain:
> domain 0: span 2-3 level MC
>  groups: 3 2
>  domain 1: span 0-3 level CPU
>   groups: 2-3 0-1
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU2 attaching NULL sched-domain.
>CPU3 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-3 level CPU
>   groups: 0-1 2-3
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-3 level CPU
>   groups: 0-1 2-3
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU2 attaching sched-domain:
> domain 0: span 2-3 level MC
>  groups: 2 3
>  domain 1: span 0-3 level CPU
>   groups: 2-3 0-1
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU3 attaching sched-domain:
> domain 0: span 2-3 level MC
>  groups: 3 2
>  domain 1: span 0-3 level CPU
>   groups: 2-3 0-1
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU2 attaching NULL sched-domain.
>CPU3 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>  domain 1: span 0-3 level CPU
>   groups: 0-1 2-3
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>  domain 1: span 0-3 level CPU
>   groups: 0-1 2-3
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU2 attaching sched-domain:
> domain 0: span 2-3 level MC
>  groups: 2 3
>  domain 1: span 0-3 level CPU
>   groups: 2-3 0-1
>   domain 2: span 0-3 level NODE
>    groups: 0-3
>CPU3 attaching sched-domain:
> domain 0: span 2-3 level MC
>  groups: 3 2
>  domain 1: span 0-3 level CPU
>   groups: 2-3 0-1
>   domain 2: span 0-3 level NODE
>    groups: 0-3

Actions: View

Attachments on bug 536549: 316990 | 316991 | 317524