Attachment 329910 Details for Bug 559048

boot.msg

boot.msg.txt (text/plain), 48.31 KB, created by Forgotten User 7Vd19u3Vod on 2009-11-29 15:43:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Forgotten User 7Vd19u3Vod

Created: 2009-11-29 15:43:43 UTC

Size: 48.31 KB

patch

obsolete

>klogd 1.4.1, log source = ksyslog started.
><5>[    0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2009-10-26 15:49:03 +0100
><6>[    0.000000] Command line: root=/dev/disk/by-id/ata-ST3500820AS_9QM1Q3SQ-part2 acpi=ht resume=/dev/disk/by-id/ata-ST3500820AS_9QM2KWZ7-part1 splash=silent quiet vga=0x31a
><6>[    0.000000] KERNEL supported cpus:
><6>[    0.000000]   Intel GenuineIntel
><6>[    0.000000]   AMD AuthenticAMD
><6>[    0.000000]   Centaur CentaurHauls
><6>[    0.000000] BIOS-provided physical RAM map:
><6>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><6>[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><6>[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><6>[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
><6>[    0.000000]  BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
><6>[    0.000000]  BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
><6>[    0.000000]  BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
><6>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
><6>[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
><6>[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
><6>[    0.000000] DMI 2.4 present.
><6>[    0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
><7>[    0.000000] MTRR default type: uncachable
><7>[    0.000000] MTRR fixed ranges enabled:
><7>[    0.000000]   00000-9FFFF write-back
><7>[    0.000000]   A0000-BFFFF uncachable
><7>[    0.000000]   C0000-C7FFF write-protect
><7>[    0.000000]   C8000-FFFFF uncachable
><7>[    0.000000] MTRR variable ranges enabled:
><7>[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
><7>[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
><7>[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
><7>[    0.000000]   3 base 0000CFF00000 mask FFFFFFF00000 uncachable
><7>[    0.000000]   4 base 000100000000 mask FFFFE0000000 write-back
><7>[    0.000000]   5 base 000120000000 mask FFFFF0000000 write-back
><7>[    0.000000]   6 disabled
><7>[    0.000000]   7 disabled
><7>[    0.000000] TOM2: 0000000130000000 aka 4864M
><6>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
><7>[    0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
><6>[    0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
><7>[    0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
><6>[    0.000000] Scanning 1 areas for low memory corruption
><6>[    0.000000] modified physical RAM map:
><6>[    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)
><6>[    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)
><6>[    0.000000]  modified: 0000000000006000 - 000000000009f800 (usable)
><6>[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
><6>[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
><6>[    0.000000]  modified: 0000000000100000 - 00000000cfee0000 (usable)
><6>[    0.000000]  modified: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
><6>[    0.000000]  modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
><6>[    0.000000]  modified: 00000000cfef0000 - 00000000cff00000 (reserved)
><6>[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
><6>[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
><6>[    0.000000]  modified: 0000000100000000 - 0000000130000000 (usable)
><7>[    0.000000] initial memory mapped : 0 - 20000000
><6>[    0.000000] Using GB pages for direct mapping
><6>[    0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
><7>[    0.000000]  0000000000 - 00c0000000 page 1G
><7>[    0.000000]  00c0000000 - 00cfe00000 page 2M
><7>[    0.000000]  00cfe00000 - 00cfee0000 page 4k
><7>[    0.000000] kernel direct mapping tables up to cfee0000 @ 8000-b000
><6>[    0.000000] init_memory_mapping: 0000000100000000-0000000130000000
><7>[    0.000000]  0100000000 - 0130000000 page 2M
><7>[    0.000000] kernel direct mapping tables up to 130000000 @ a000-c000
><6>[    0.000000] RAMDISK: 3794b000 - 37fef641
><4>[    0.000000] ACPI: RSDP 00000000000f6970 00014 (v00 GBT   )
><4>[    0.000000] ACPI: RSDT 00000000cfee3000 00034 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
><4>[    0.000000] ACPI: FACP 00000000cfee3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
><4>[    0.000000] ACPI: DSDT 00000000cfee30c0 06299 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
><4>[    0.000000] ACPI: FACS 00000000cfee0000 00040
><4>[    0.000000] ACPI: HPET 00000000cfee9440 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
><4>[    0.000000] ACPI: MCFG 00000000cfee9480 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
><4>[    0.000000] ACPI: APIC 00000000cfee9380 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
><7>[    0.000000] ACPI: Local APIC address 0xfee00000
><6>[    0.000000] Scanning NUMA topology in Northbridge 24
><6>[    0.000000] No NUMA configuration found
><6>[    0.000000] Faking a node at 0000000000000000-0000000130000000
><6>[    0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
><6>[    0.000000]   NODE_DATA [000000000000b000 - 0000000000022fff]
><6>[    0.000000]   bootmap [0000000000023000 -  0000000000048fff] pages 26
><6>[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
><6>[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
><6>[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
><6>[    0.000000]   #2 [0001000000 - 0001c4bf70]    TEXT DATA BSS ==> [0001000000 - 0001c4bf70]
><6>[    0.000000]   #3 [003794b000 - 0037fef641]          RAMDISK ==> [003794b000 - 0037fef641]
><6>[    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
><6>[    0.000000]   #5 [0001c4c000 - 0001c4c0fe]              BRK ==> [0001c4c000 - 0001c4c0fe]
><6>[    0.000000]   #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
><6>[    0.000000]   #7 [000000a000 - 000000b000]          PGTABLE ==> [000000a000 - 000000b000]
><6>[    0.000000] found SMP MP-table at [ffff8800000f4fb0] f4fb0
><7>[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001e00000-ffff8800057fffff] on node 0
><4>[    0.000000] Zone PFN ranges:
><4>[    0.000000]   DMA      0x00000000 -> 0x00001000
><4>[    0.000000]   DMA32    0x00001000 -> 0x00100000
><4>[    0.000000]   Normal   0x00100000 -> 0x00130000
><4>[    0.000000] Movable zone start PFN for each node
><4>[    0.000000] early_node_map[4] active PFN ranges
><4>[    0.000000]     0: 0x00000000 -> 0x00000001
><4>[    0.000000]     0: 0x00000006 -> 0x0000009f
><4>[    0.000000]     0: 0x00000100 -> 0x000cfee0
><4>[    0.000000]     0: 0x00100000 -> 0x00130000
><7>[    0.000000] On node 0 totalpages: 1048186
><7>[    0.000000]   DMA zone: 56 pages used for memmap
><7>[    0.000000]   DMA zone: 102 pages reserved
><7>[    0.000000]   DMA zone: 3836 pages, LIFO batch:0
><7>[    0.000000]   DMA32 zone: 14280 pages used for memmap
><7>[    0.000000]   DMA32 zone: 833304 pages, LIFO batch:31
><7>[    0.000000]   Normal zone: 2688 pages used for memmap
><7>[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
><6>[    0.000000] ACPI: PM-Timer IO Port: 0x4008
><7>[    0.000000] ACPI: Local APIC address 0xfee00000
><6>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><6>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><6>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
><6>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
><6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
><6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
><6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
><6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
><6>[    0.000000] Using ACPI for processor (LAPIC) configuration information
><6>[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
><6>[    0.000000] Intel MultiProcessor Specification v1.4
><6>[    0.000000] MPTABLE: OEM ID: OEM00000
><6>[    0.000000] MPTABLE: Product ID: PROD00000000
><6>[    0.000000] MPTABLE: APIC at: 0xFEE00000
><6>[    0.000000] I/O APIC #4 Version 17 at 0xFEC00000.
><6>[    0.000000] Processors: 4
><6>[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
><7>[    0.000000] nr_irqs_gsi: 24
><6>[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
><6>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
><6>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
><6>[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
><6>[    0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
><6>[    0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
><6>[    0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
><6>[    0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
><6>[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
><6>[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
><6>[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
><6>[    0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
><6>[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
><6>[    0.000000] PERCPU: Embedded 28 pages at ffff88000584a000, static data 82784 bytes
><4>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031060
><4>[    0.000000] Policy zone: Normal
><5>[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-ST3500820AS_9QM1Q3SQ-part2 acpi=ht resume=/dev/disk/by-id/ata-ST3500820AS_9QM2KWZ7-part1 splash=silent quiet vga=0x31a
><6>[    0.000000] bootsplash: silent mode.
><4>[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>[    0.000000] Initializing CPU#0
><6>[    0.000000] Checking aperture...
><6>[    0.000000] No AGP bridge found
><6>[    0.000000] Node 0: aperture @ 20000000 size 32 MB
><6>[    0.000000] Aperture pointing to e820 RAM. Ignoring.
><6>[    0.000000] Your BIOS doesn't leave a aperture memory hole
><6>[    0.000000] Please enable the IOMMU option in the BIOS setup
><6>[    0.000000] This costs you 64 MB of RAM
><6>[    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
><6>[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
><6>[    0.000000] Memory: 4047480k/4980736k available (5497k kernel code, 787992k absent, 145264k reserved, 4473k data, 980k init)
><6>[    0.000000] Hierarchical RCU implementation.
><6>[    0.000000] NR_IRQS:4352 nr_irqs:440
><4>[    0.000000] Fast TSC calibration failed
><6>[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
><4>[    0.000000] Detected 2209.394 MHz processor.
><4>[    0.000086] Console: colour dummy device 80x25
><6>[    0.000089] console [tty0] enabled
><7>[    0.000291] hpet clockevent registered
><6>[    0.000297] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
><6>[    0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4418.78 BogoMIPS (lpj=2209391)
><4>[    0.007223] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
><6>[    0.007317] Security Framework initialized
><6>[    0.007336] AppArmor: AppArmor initialized
><6>[    0.008035] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
><6>[    0.010349] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>[    0.011402] Mount-cache hash table entries: 256
><6>[    0.011567] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>[    0.011570] CPU: L2 Cache: 512K (64 bytes/line)
><6>[    0.011573] CPU 0/0x0 -> Node 0
><7>[    0.011577] tseg: 00cff00000
><6>[    0.011579] CPU: Physical Processor ID: 0
><6>[    0.011580] CPU: Processor Core ID: 0
><6>[    0.011583] mce: CPU supports 6 MCE banks
><6>[    0.011592] using C1E aware idle routine
><6>[    0.011594] Performance Counters: AMD PMU driver.
><6>[    0.011599] ... version:                 0
><6>[    0.011600] ... bit width:               48
><6>[    0.011602] ... generic counters:        4
><6>[    0.011603] ... value mask:              0000ffffffffffff
><6>[    0.011605] ... max period:              00007fffffffffff
><6>[    0.011607] ... fixed-purpose counters:  0
><6>[    0.011608] ... counter mask:            000000000000000f
><6>[    0.012624] Setting APIC routing to flat
><4>[    0.013149] ExtINT not setup in hardware but reported by MP table
><7>[    0.013406]   alloc irq_desc for 16 on node 0
><7>[    0.013408]   alloc kstat_irqs on node 0
><7>[    0.013417]   alloc irq_desc for 17 on node 0
><7>[    0.013419]   alloc kstat_irqs on node 0
><7>[    0.013426]   alloc irq_desc for 18 on node 0
><7>[    0.013427]   alloc kstat_irqs on node 0
><7>[    0.013434]   alloc irq_desc for 19 on node 0
><7>[    0.013436]   alloc kstat_irqs on node 0
><7>[    0.013442]   alloc irq_desc for 20 on node 0
><7>[    0.013444]   alloc kstat_irqs on node 0
><7>[    0.013450]   alloc irq_desc for 21 on node 0
><7>[    0.013451]   alloc kstat_irqs on node 0
><7>[    0.013457]   alloc irq_desc for 22 on node 0
><7>[    0.013459]   alloc kstat_irqs on node 0
><6>[    0.013609] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
><6>[    0.023956] CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
><6>[    0.023996] Booting processor 1 APIC 0x1 ip 0x6000
><6>[    0.000999] Initializing CPU#1
><6>[    0.000999] Calibrating delay using timer specific routine.. 4420.41 BogoMIPS (lpj=2210208)
><6>[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>[    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
><6>[    0.000999] CPU 1/0x1 -> Node 0
><6>[    0.000999] CPU: Physical Processor ID: 0
><6>[    0.000999] CPU: Processor Core ID: 1
><6>[    0.000999] mce: CPU supports 6 MCE banks
><6>[    0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
><6>[    0.094674] CPU1: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
><6>[    0.094683] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
><6>[    0.095055] Booting processor 2 APIC 0x2 ip 0x6000
><6>[    0.000999] Initializing CPU#2
><6>[    0.000999] Calibrating delay using timer specific routine.. 4420.30 BogoMIPS (lpj=2210152)
><6>[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>[    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
><6>[    0.000999] CPU 2/0x2 -> Node 0
><6>[    0.000999] CPU: Physical Processor ID: 0
><6>[    0.000999] CPU: Processor Core ID: 3
><6>[    0.000999] mce: CPU supports 6 MCE banks
><6>[    0.000999] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
><6>[    0.165948] CPU2: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
><6>[    0.165958] checking TSC synchronization [CPU#1 -> CPU#2]: passed.
><6>[    0.186040] Booting processor 3 APIC 0x3 ip 0x6000
><6>[    0.000999] Initializing CPU#3
><6>[    0.000999] Calibrating delay using timer specific routine.. 4420.32 BogoMIPS (lpj=2210163)
><6>[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>[    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
><6>[    0.000999] CPU 3/0x3 -> Node 0
><6>[    0.000999] CPU: Physical Processor ID: 0
><6>[    0.000999] CPU: Processor Core ID: 2
><6>[    0.000999] mce: CPU supports 6 MCE banks
><6>[    0.000999] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
><6>[    0.256936] CPU3: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03
><6>[    0.256945] checking TSC synchronization [CPU#2 -> CPU#3]: passed.
><6>[    0.276982] Brought up 4 CPUs
><6>[    0.276986] Total of 4 processors activated (17679.82 BogoMIPS).
><7>[    0.277139] CPU0 attaching sched-domain:
><7>[    0.277142]  domain 0: span 0-3 level MC
><7>[    0.277145]   groups: 0 1 2 3
><7>[    0.277153] CPU1 attaching sched-domain:
><7>[    0.277155]  domain 0: span 0-3 level MC
><7>[    0.277157]   groups: 1 2 3 0
><7>[    0.277162] CPU2 attaching sched-domain:
><7>[    0.277164]  domain 0: span 0-3 level MC
><7>[    0.277166]   groups: 2 3 0 1
><7>[    0.277171] CPU3 attaching sched-domain:
><7>[    0.277173]  domain 0: span 0-3 level MC
><7>[    0.277175]   groups: 3 0 1 2
><6>[    0.278011] devtmpfs: initialized
><6>[    0.280973] Booting paravirtualized kernel on bare hardware
><6>[    0.281089] regulator: core version 0.5
><4>[    0.281089] Time: 13:39:12  Date: 11/29/09
><6>[    0.281092] NET: Registered protocol family 16
><7>[    0.281217] node 0 link 0: io port [c000, ffff]
><6>[    0.281221] TOM: 00000000d0000000 aka 3328M
><7>[    0.281224] node 0 link 0: mmio [a0000, bffff]
><7>[    0.281227] node 0 link 0: mmio [d0000000, fe02ffff]
><7>[    0.281231] node 0 link 0: mmio [e0000000, efffffff]
><6>[    0.281234] TOM2: 0000000130000000 aka 4864M
><7>[    0.281236] bus: [00,03] on node 0 link 0
><7>[    0.281238] bus: 00 index 0 io port: [0, ffff]
><7>[    0.281240] bus: 00 index 1 mmio: [a0000, bffff]
><7>[    0.281242] bus: 00 index 2 mmio: [d0000000, ffffffff]
><7>[    0.281244] bus: 00 index 3 mmio: [130000000, fcffffffff]
><5>[    0.281310] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
><5>[    0.281313] PCI: MCFG area at e0000000 reserved in E820
><6>[    0.290228] PCI: Using MMCONFIG at e0000000 - efffffff
><6>[    0.290231] PCI: Using configuration type 1 for base access
><4>[    0.291098] bio: create slab <bio-0> at 0
><6>[    0.292008] ACPI: Interpreter disabled.
><5>[    0.292165] SCSI subsystem initialized
><7>[    0.292173] libata version 3.00 loaded.
><6>[    0.292173] usbcore: registered new interface driver usbfs
><6>[    0.292173] usbcore: registered new interface driver hub
><6>[    0.292173] usbcore: registered new device driver usb
><4>[    0.292173] PCI: Probing PCI hardware
><7>[    0.292173] PCI: Probing PCI hardware (bus 00)
><7>[    0.292173] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
><6>[    0.292173] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
><6>[    0.292173] pci 0000:00:02.0: PME# disabled
><6>[    0.292173] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
><6>[    0.292173] pci 0000:00:0a.0: PME# disabled
><7>[    0.292173] pci 0000:00:12.0: reg 10 io port: [0xff00-0xff07]
><7>[    0.292173] pci 0000:00:12.0: reg 14 io port: [0xfe00-0xfe03]
><7>[    0.292173] pci 0000:00:12.0: reg 18 io port: [0xfd00-0xfd07]
><7>[    0.292173] pci 0000:00:12.0: reg 1c io port: [0xfc00-0xfc03]
><7>[    0.292173] pci 0000:00:12.0: reg 20 io port: [0xfb00-0xfb0f]
><7>[    0.292173] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
><7>[    0.292184] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
><7>[    0.292246] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
><7>[    0.292306] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
><7>[    0.292367] pci 0000:00:13.3: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
><7>[    0.292428] pci 0000:00:13.4: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
><7>[    0.292509] pci 0000:00:13.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
><7>[    0.292568] pci 0000:00:13.5: supports D1 D2
><6>[    0.292570] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
><6>[    0.292574] pci 0000:00:13.5: PME# disabled
><7>[    0.292623] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
><7>[    0.292698] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
><7>[    0.292705] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
><7>[    0.292713] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
><7>[    0.292720] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
><7>[    0.292727] pci 0000:00:14.1: reg 20 io port: [0xf900-0xf90f]
><7>[    0.292785] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
><6>[    0.292834] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
><6>[    0.292838] pci 0000:00:14.2: PME# disabled
><7>[    0.293090] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
><7>[    0.293099] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
><7>[    0.293109] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
><7>[    0.293119] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
><6>[    0.293159] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
><7>[    0.293230] pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
><7>[    0.293233] pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
><7>[    0.293238] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
><7>[    0.293287] pci 0000:02:00.0: reg 10 io port: [0xee00-0xeeff]
><7>[    0.293306] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff]
><7>[    0.293325] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
><7>[    0.293365] pci 0000:02:00.0: supports D1 D2
><6>[    0.293367] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
><6>[    0.293372] pci 0000:02:00.0: PME# disabled
><6>[    0.293404] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
><7>[    0.293491] pci 0000:00:0a.0: bridge io port: [0xe000-0xefff]
><7>[    0.293495] pci 0000:00:0a.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
><7>[    0.293499] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
><7>[    0.293540] pci 0000:03:06.0: reg 10 32bit mmio: [0xfddff000-0xfddff1ff]
><7>[    0.293616] pci 0000:03:07.0: reg 10 io port: [0xce00-0xceff]
><7>[    0.293625] pci 0000:03:07.0: reg 14 32bit mmio: [0xfddfe000-0xfddfefff]
><7>[    0.293661] pci 0000:03:07.0: reg 30 32bit mmio: [0x000000-0x00ffff]
><7>[    0.293725] pci 0000:03:0e.0: reg 10 32bit mmio: [0xfddfd000-0xfddfd7ff]
><7>[    0.293735] pci 0000:03:0e.0: reg 14 32bit mmio: [0xfddf8000-0xfddfbfff]
><7>[    0.293798] pci 0000:03:0e.0: supports D1 D2
><6>[    0.293800] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
><6>[    0.293805] pci 0000:03:0e.0: PME# disabled
><6>[    0.293845] pci 0000:00:14.4: transparent bridge
><7>[    0.293849] pci 0000:00:14.4: bridge io port: [0xc000-0xcfff]
><7>[    0.293854] pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
><7>[    0.293859] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff]
><3>[    0.294805] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
><6>[    0.294813] pci 0000:00:00.0: BAR 3: can't allocate resource
><6>[    0.298126] PCI-DMA: Disabling AGP.
><6>[    0.298206] PCI-DMA: aperture base @ 20000000 size 65536 KB
><6>[    0.298208] PCI-DMA: using GART IOMMU.
><6>[    0.298211] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
><6>[    0.299592] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
><6>[    0.299600] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
><6>[    0.306838] AppArmor: AppArmor Filesystem Enabled
><6>[    0.306843] pnp: PnP ACPI: disabled
><6>[    0.311705] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
><6>[    0.311708] pci 0000:00:02.0:   IO window: 0xd000-0xdfff
><6>[    0.311713] pci 0000:00:02.0:   MEM window: 0xfa000000-0xfcffffff
><6>[    0.311716] pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
><6>[    0.311722] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
><6>[    0.311725] pci 0000:00:0a.0:   IO window: 0xe000-0xefff
><6>[    0.311729] pci 0000:00:0a.0:   MEM window: 0xfdf00000-0xfdffffff
><6>[    0.311732] pci 0000:00:0a.0:   PREFETCH window: 0x000000fde00000-0x000000fdefffff
><6>[    0.311738] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
><6>[    0.311741] pci 0000:00:14.4:   IO window: 0xc000-0xcfff
><6>[    0.311747] pci 0000:00:14.4:   MEM window: 0xfdd00000-0xfddfffff
><6>[    0.311752] pci 0000:00:14.4:   PREFETCH window: 0xfdc00000-0xfdcfffff
><7>[    0.311763] pci 0000:00:02.0: setting latency timer to 64
><7>[    0.311769] pci 0000:00:0a.0: setting latency timer to 64
><7>[    0.311780] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
><7>[    0.311782] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
><7>[    0.311785] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
><7>[    0.311787] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff]
><7>[    0.311790] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
><7>[    0.311792] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
><7>[    0.311794] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
><7>[    0.311797] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff]
><7>[    0.311799] pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
><7>[    0.311801] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff]
><7>[    0.311803] pci_bus 0000:03: resource 2 pref mem [0xfdc00000-0xfdcfffff]
><7>[    0.311806] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
><7>[    0.311808] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
><6>[    0.311891] NET: Registered protocol family 2
><6>[    0.312111] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
><6>[    0.313529] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
><6>[    0.316508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>[    0.316879] TCP: Hash tables configured (established 524288 bind 65536)
><6>[    0.316883] TCP reno registered
><6>[    0.317038] NET: Registered protocol family 1
><6>[    0.317107] Unpacking initramfs...
><6>[    0.448588] Freeing initrd memory: 6801k freed
><6>[    0.451102] platform rtc_cmos: registered platform RTC device (no PNP device found)
><6>[    0.451624] Scanning for low memory corruption every 60 seconds
><6>[    0.451824] audit: initializing netlink socket (disabled)
><5>[    0.451839] type=2000 audit(1259501951.451:1): initialized
><6>[    0.455007] HugeTLB registered 2 MB page size, pre-allocated 0 pages
><5>[    0.455217] VFS: Disk quotas dquot_6.5.2
><4>[    0.455260] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>[    0.455423] msgmni has been set to 1979
><6>[    0.455530] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
><6>[    0.455533] io scheduler noop registered
><6>[    0.455535] io scheduler anticipatory registered
><6>[    0.455537] io scheduler deadline registered
><6>[    0.455561] io scheduler cfq registered (default)
><7>[    0.548768] Switched to high resolution mode on CPU 1
><7>[    0.548771] Switched to high resolution mode on CPU 2
><7>[    0.548775] Switched to high resolution mode on CPU 3
><7>[    0.561654] Switched to high resolution mode on CPU 0
><7>[    0.572072] pci 0000:01:00.0: Boot video device
><7>[    0.572226]   alloc irq_desc for 24 on node 0
><7>[    0.572229]   alloc kstat_irqs on node 0
><7>[    0.572240] pcieport-driver 0000:00:02.0: irq 24 for MSI/MSI-X
><7>[    0.572248] pcieport-driver 0000:00:02.0: setting latency timer to 64
><7>[    0.572392]   alloc irq_desc for 25 on node 0
><7>[    0.572394]   alloc kstat_irqs on node 0
><7>[    0.572400] pcieport-driver 0000:00:0a.0: irq 25 for MSI/MSI-X
><7>[    0.572405] pcieport-driver 0000:00:0a.0: setting latency timer to 64
><4>[    0.572493] pci-stub: invalid id string ""
><6>[    0.572730] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 5120k, total 262144k
><6>[    0.572733] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
><6>[    0.572735] vesafb: scrolling: redraw
><6>[    0.572738] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>[    0.572891] bootsplash 3.1.6-2004/03/31: looking for picture...
><6>[    0.587588] bootsplash: silentjpeg size 130564 bytes
><6>[    0.611419] bootsplash: ...found (1280x1024, 29083 bytes, v3).
><4>[    0.679748] Console: switching to colour frame buffer device 156x60
><6>[    0.748008] fb0: VESA VGA frame buffer device
><6>[    0.749295] Non-volatile memory driver v1.3
><6>[    0.749298] Linux agpgart interface v0.103
><6>[    0.749303] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
><6>[    0.749425] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><7>[    0.749761] ahci 0000:00:12.0: version 3.0
><6>[    0.749782] ahci 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 22
><6>[    0.749925] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
><6>[    0.749929] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
><6>[    0.750277] scsi0 : ahci
><6>[    0.750394] scsi1 : ahci
><6>[    0.750443] scsi2 : ahci
><6>[    0.750491] scsi3 : ahci
><6>[    0.750523] ata1: SATA max UDMA/133 irq_stat 0x00400000 irq 22, PHY RDY changed
><6>[    0.750526] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
><6>[    0.750530] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
><6>[    0.750533] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
><6>[    0.750615] Fixed MDIO Bus: probed
><6>[    0.750622] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
><6>[    0.750678] ehci_hcd 0000:00:13.5: PCI->APIC IRQ transform: INT D -> IRQ 19
><6>[    0.750690] ehci_hcd 0000:00:13.5: EHCI Host Controller
><6>[    0.750727] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
><6>[    0.750757] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
><6>[    0.750777] ehci_hcd 0000:00:13.5: debug port 1
><6>[    0.750809] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
><6>[    0.756018] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
><6>[    0.756044] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
><6>[    0.756046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>[    0.756049] usb usb1: Product: EHCI Host Controller
><6>[    0.756050] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd
><6>[    0.756052] usb usb1: SerialNumber: 0000:00:13.5
><6>[    0.756134] usb usb1: configuration #1 chosen from 1 choice
><6>[    0.756162] hub 1-0:1.0: USB hub found
><6>[    0.756169] hub 1-0:1.0: 10 ports detected
><6>[    0.756256] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
><6>[    0.756301] ohci_hcd 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 16
><6>[    0.756312] ohci_hcd 0000:00:13.0: OHCI Host Controller
><6>[    0.756321] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
><6>[    0.756354] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
><6>[    0.811057] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
><6>[    0.811060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>[    0.811062] usb usb2: Product: OHCI Host Controller
><6>[    0.811064] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop ohci_hcd
><6>[    0.811066] usb usb2: SerialNumber: 0000:00:13.0
><6>[    0.811120] usb usb2: configuration #1 chosen from 1 choice
><6>[    0.811143] hub 2-0:1.0: USB hub found
><6>[    0.811151] hub 2-0:1.0: 2 ports detected
><6>[    0.811234] ohci_hcd 0000:00:13.1: PCI->APIC IRQ transform: INT B -> IRQ 17
><6>[    0.811244] ohci_hcd 0000:00:13.1: OHCI Host Controller
><6>[    0.811252] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
><6>[    0.811285] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
><6>[    0.866048] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
><6>[    0.866051] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>[    0.866053] usb usb3: Product: OHCI Host Controller
><6>[    0.866055] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-desktop ohci_hcd
><6>[    0.866057] usb usb3: SerialNumber: 0000:00:13.1
><6>[    0.866113] usb usb3: configuration #1 chosen from 1 choice
><6>[    0.866135] hub 3-0:1.0: USB hub found
><6>[    0.866143] hub 3-0:1.0: 2 ports detected
><6>[    0.866226] ohci_hcd 0000:00:13.2: PCI->APIC IRQ transform: INT C -> IRQ 18
><6>[    0.866236] ohci_hcd 0000:00:13.2: OHCI Host Controller
><6>[    0.866245] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
><6>[    0.866277] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
><6>[    0.921046] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
><6>[    0.921049] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>[    0.921051] usb usb4: Product: OHCI Host Controller
><6>[    0.921053] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-desktop ohci_hcd
><6>[    0.921055] usb usb4: SerialNumber: 0000:00:13.2
><6>[    0.921107] usb usb4: configuration #1 chosen from 1 choice
><6>[    0.921129] hub 4-0:1.0: USB hub found
><6>[    0.921138] hub 4-0:1.0: 2 ports detected
><6>[    0.921213] ohci_hcd 0000:00:13.3: PCI->APIC IRQ transform: INT B -> IRQ 17
><6>[    0.921224] ohci_hcd 0000:00:13.3: OHCI Host Controller
><6>[    0.921232] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
><6>[    0.921245] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
><6>[    0.976047] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
><6>[    0.976049] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>[    0.976051] usb usb5: Product: OHCI Host Controller
><6>[    0.976053] usb usb5: Manufacturer: Linux 2.6.31.5-0.1-desktop ohci_hcd
><6>[    0.976055] usb usb5: SerialNumber: 0000:00:13.3
><6>[    0.976106] usb usb5: configuration #1 chosen from 1 choice
><6>[    0.976127] hub 5-0:1.0: USB hub found
><6>[    0.976135] hub 5-0:1.0: 2 ports detected
><6>[    0.976208] ohci_hcd 0000:00:13.4: PCI->APIC IRQ transform: INT C -> IRQ 18
><6>[    0.976218] ohci_hcd 0000:00:13.4: OHCI Host Controller
><6>[    0.976228] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
><6>[    0.976241] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
><6>[    1.031048] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
><6>[    1.031050] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>[    1.031053] usb usb6: Product: OHCI Host Controller
><6>[    1.031054] usb usb6: Manufacturer: Linux 2.6.31.5-0.1-desktop ohci_hcd
><6>[    1.031056] usb usb6: SerialNumber: 0000:00:13.4
><6>[    1.031104] usb usb6: configuration #1 chosen from 1 choice
><6>[    1.031127] hub 6-0:1.0: USB hub found
><6>[    1.031137] hub 6-0:1.0: 2 ports detected
><6>[    1.031190] uhci_hcd: USB Universal Host Controller Interface driver
><6>[    1.031229] Initializing USB Mass Storage driver...
><6>[    1.031267] usbcore: registered new interface driver usb-storage
><6>[    1.031270] USB Mass Storage support registered.
><6>[    1.031314] usbcore: registered new interface driver libusual
><6>[    1.031325] usbcore: registered new interface driver ums-alauda
><6>[    1.031335] usbcore: registered new interface driver ums-cypress
><6>[    1.031346] usbcore: registered new interface driver ums-datafab
><6>[    1.031357] usbcore: registered new interface driver ums-freecom
><6>[    1.031367] usbcore: registered new interface driver ums-isd200
><6>[    1.031383] usbcore: registered new interface driver ums-jumpshot
><6>[    1.031393] usbcore: registered new interface driver ums-karma
><6>[    1.031403] usbcore: registered new interface driver ums-onetouch
><6>[    1.031415] usbcore: registered new interface driver ums-sddr09
><6>[    1.031426] usbcore: registered new interface driver ums-sddr55
><6>[    1.031437] usbcore: registered new interface driver ums-usbat
><6>[    1.031464] PNP: No PS/2 controller found. Probing ports directly.
><6>[    1.031848] serio: i8042 KBD port at 0x60,0x64 irq 1
><6>[    1.031855] serio: i8042 AUX port at 0x60,0x64 irq 12
><6>[    1.031948] mice: PS/2 mouse device common for all mice
><6>[    1.032052] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
><6>[    1.032087] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
><6>[    1.032097] cpuidle: using governor ladder
><6>[    1.032100] cpuidle: using governor menu
><6>[    1.032349] usbcore: registered new interface driver hiddev
><6>[    1.032363] usbcore: registered new interface driver usbhid
><6>[    1.032368] usbhid: v2.6:USB HID core driver
><6>[    1.055148] ata4: SATA link down (SStatus 0 SControl 300)
><6>[    1.055196] ata2: SATA link down (SStatus 0 SControl 300)
><6>[    1.058694] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
><6>[    1.119702] TCP cubic registered
><6>[    1.119778] NET: Registered protocol family 10
><6>[    1.120315] lo: Disabled Privacy Extensions
><6>[    1.120687] lib80211: common routines for IEEE802.11 drivers
><7>[    1.120690] lib80211_crypt: registered algorithm 'NULL'
><7>[    1.120780] PM: Checking image partition /dev/disk/by-id/ata-ST3500820AS_9QM2KWZ7-part1
><6>[    1.160033] usb 1-7: new high speed USB device using ehci_hcd and address 3
><3>[    1.208020] ata3: softreset failed (device not ready)
><4>[    1.208030] ata3: applying SB600 PMP SRST workaround and retrying
><6>[    1.276057] usb 1-7: New USB device found, idVendor=058f, idProduct=6362
><6>[    1.276060] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>[    1.276063] usb 1-7: Product: Mass Storage Device
><6>[    1.276064] usb 1-7: Manufacturer: Generic
><6>[    1.276066] usb 1-7: SerialNumber: 058F63626376
><6>[    1.276124] usb 1-7: configuration #1 chosen from 1 choice
><6>[    1.276271] scsi4 : SCSI emulation for USB Mass Storage devices
><7>[    1.276331] usb-storage: device found at 3
><7>[    1.276333] usb-storage: waiting for device to settle before scanning
><6>[    1.361039] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>[    1.362434] ata3.00: ATA-8: ST3500820AS, SD36, max UDMA/133
><6>[    1.362437] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
><6>[    1.362452] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
><6>[    1.364245] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
><6>[    1.364256] ata3.00: configured for UDMA/133
><6>[    1.502019] usb 3-2: new full speed USB device using ohci_hcd and address 2
><3>[    1.626087] ata1: softreset failed (device not ready)
><4>[    1.626094] ata1: applying SB600 PMP SRST workaround and retrying
><6>[    1.641291] usb 3-2: New USB device found, idVendor=05a9, idProduct=a511
><6>[    1.641293] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
><6>[    1.641340] usb 3-2: configuration #1 chosen from 1 choice
><6>[    1.779064] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>[    1.781996] ata1.00: HPA unlocked: 976771055 -> 976773168, native 976773168
><6>[    1.782000] ata1.00: ATA-8: ST3500820AS, SD36, max UDMA/133
><6>[    1.782003] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
><6>[    1.782022] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
><6>[    1.783783] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
><6>[    1.783791] ata1.00: configured for UDMA/133
><5>[    1.794122] scsi 0:0:0:0: Direct-Access     ATA      ST3500820AS      SD36 PQ: 0 ANSI: 5
><5>[    1.794293] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
><5>[    1.794338] sd 0:0:0:0: [sda] Write Protect is off
><7>[    1.794340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>[    1.794361] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>[    1.794365] scsi 2:0:0:0: Direct-Access     ATA      ST3500820AS      SD36 PQ: 0 ANSI: 5
><6>[    1.794483]  sda:
><5>[    1.794513] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
><5>[    1.794553] sd 2:0:0:0: [sdb] Write Protect is off
><7>[    1.794556] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>[    1.794575] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6>[    1.794703]  sdb: sda1 sda2 sda3
><5>[    1.805860] sd 0:0:0:0: [sda] Attached SCSI disk
><4>[    1.808974]  sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
><5>[    1.836562] sd 2:0:0:0: [sdb] Attached SCSI disk
><6>[    1.943131] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
><7>[    1.945826] PM: Resume from disk failed.
><4>[    1.945839] registered taskstats version 1
><4>[    1.945987]   Magic number: 1:721:686
><6>[    1.946050] rtc_cmos rtc_cmos: setting system clock to 2009-11-29 13:39:14 UTC (1259501954)
><6>[    1.946115] Freeing unused kernel memory: 980k freed
><6>[    1.946442] Write protecting the kernel read-only data: 8856k
><6>[    1.977031] pata_atiixp 0000:00:14.1: PCI->APIC IRQ transform: INT A -> IRQ 16
><6>[    1.977142] scsi5 : pata_atiixp
><6>[    1.977217] scsi6 : pata_atiixp
><6>[    1.977246] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
><6>[    1.977249] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
><6>[    2.150503] ata5.00: ATAPI: SONY    DVD-ROM DDU1615, GYN2, max UDMA/66
><6>[    2.150533] ata5.01: ATAPI: Optiarc DVD RW AD-7200A, 1.06, max UDMA/66
><6>[    2.172463] ata5.00: configured for UDMA/66
><6>[    2.178461] ata5.01: configured for UDMA/66
><5>[    2.190628] scsi 5:0:0:0: CD-ROM            SONY     DVD-ROM DDU1615  GYN2 PQ: 0 ANSI: 5
><5>[    2.192437] scsi 5:0:1:0: CD-ROM            Optiarc  DVD RW AD-7200A  1.06 PQ: 0 ANSI: 5
><5>[    2.276770] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
><5>[    2.277391] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
><5>[    2.278510] scsi 4:0:0:2: Direct-Access     Generic  USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
><5>[    2.279763] sd 4:0:0:0: [sdc] Attached SCSI removable disk
><5>[    2.280259] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
><5>[    2.281513] sd 4:0:0:1: [sdd] Attached SCSI removable disk
><5>[    2.282796] sd 4:0:0:2: [sde] Attached SCSI removable disk
><7>[    2.283501] usb-storage: device scan complete
><5>[    2.283522] sd 4:0:0:3: [sdf] Attached SCSI removable disk
><6>[    2.352269] aic7xxx 0000:03:07.0: PCI->APIC IRQ transform: INT A -> IRQ 21
><6>[   17.364125] scsi7 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
><6>[   17.364126]         <Adaptec 2940 SCSI adapter>
><6>[   17.364127]         aic7870: Single Channel A, SCSI Id=0, 16/253 SCBs
><6>[   17.364128] 
><5>[   18.158211] scsi 7:0:4:0: Sequential-Access CONNER   CTT8000-S        1.17 PQ: 0 ANSI: 2
><6>[   18.158222] scsi target7:0:4: Beginning Domain Validation
><6>[   18.177019] scsi target7:0:4: FAST-5 SCSI 5.0 MB/s ST (200 ns, offset 15)
><6>[   18.187085] scsi target7:0:4: Domain Validation skipping write tests
><6>[   18.187087] scsi target7:0:4: Ending Domain Validation
><5>[   18.241553] scsi 7:0:5:0: Scanner           UMAX     Astra 610S       V1.3 PQ: 0 ANSI: 2
><6>[   18.241559] scsi target7:0:5: Beginning Domain Validation
><6>[   18.386283] scsi target7:0:5: Ending Domain Validation
><6>[   18.945813] Uniform Multi-Platform E-IDE driver
><6>[   18.971682] udev: starting version 146
><7>[   19.360997] PM: Marking nosave pages: 0000000000001000 - 0000000000006000
><7>[   19.361002] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
><7>[   19.361006] PM: Marking nosave pages: 00000000cfee0000 - 0000000100000000
><7>[   19.361668] PM: Marking nosave pages: 0000000020000000 - 0000000024000000
><7>[   19.361959] PM: Basic memory bitmaps created
><7>[   19.384233] PM: Basic memory bitmaps freed
><6>[   19.391860] PM: Starting manual resume from disk
><7>[   19.391864] PM: Resume from partition 8:17
><7>[   19.391866] PM: Checking hibernation image.
><7>[   19.392156] PM: Resume from disk failed.
><6>[   20.939540] EXT4-fs (sda2): barriers enabled
><6>[   20.945102] kjournald2 starting: pid 281, dev sda2:8, commit interval 5 seconds
><6>[   20.945502] EXT4-fs (sda2): internal journal on sda2:8
><6>[   20.945505] EXT4-fs (sda2): delayed allocation enabled
><6>[   20.945508] EXT4-fs: file extents enabled
><6>[   20.956742] EXT4-fs: mballoc enabled
><6>[   20.956755] EXT4-fs (sda2): mounted filesystem with ordered data mode
><7>[   23.481062] preloadtrace: systemtap: 0.9.9/0.142, base: ffffffffa0133000, memory: 49196+82372+44512+14000 data+text+ctx+net, probes: 44
><6>[   25.234123] udev: starting version 146
><6>[   25.253983] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
><6>[   25.254021] r8169 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
><7>[   25.254110] r8169 0000:02:00.0: setting latency timer to 64
><7>[   25.254163]   alloc irq_desc for 26 on node 0
><7>[   25.254165]   alloc kstat_irqs on node 0
><7>[   25.254184] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
><6>[   25.254825] eth0: RTL8168b/8111b at 0xffffc9000067e000, 00:1d:7d:d7:e5:d1, XID 38000000 IRQ 26
><4>[   25.291551] nvidia: module license 'NVIDIA' taints kernel.
><4>[   25.291556] Disabling lock debugging due to kernel taint
><6>[   25.300265] EDAC MC: Ver: 2.1.0 Oct 27 2009
><4>[   25.309269] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
><6>[   25.309274] Uniform CD-ROM driver Revision: 3.20
><7>[   25.309370] sr 5:0:0:0: Attached scsi CD-ROM sr0
><5>[   25.309518] sd 0:0:0:0: Attached scsi generic sg0 type 0
><5>[   25.309549] sd 2:0:0:0: Attached scsi generic sg1 type 0
><5>[   25.309577] sr 5:0:0:0: Attached scsi generic sg2 type 5
><5>[   25.309605] sr 5:0:1:0: Attached scsi generic sg3 type 5
><5>[   25.309634] sd 4:0:0:0: Attached scsi generic sg4 type 0
><5>[   25.309660] sd 4:0:0:1: Attached scsi generic sg5 type 0
><5>[   25.309691] sd 4:0:0:2: Attached scsi generic sg6 type 0
><5>[   25.309716] sd 4:0:0:3: Attached scsi generic sg7 type 0
><5>[   25.309744] scsi 7:0:4:0: Attached scsi generic sg8 type 1
><5>[   25.309771] scsi 7:0:5:0: Attached scsi generic sg9 type 6
><6>[   25.310319] input: PC Speaker as /devices/platform/pcspkr/input/input2
><4>[   25.314906] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
><7>[   25.315014] sr 5:0:1:0: Attached scsi CD-ROM sr1
><6>[   25.315730] st: Version 20081215, fixed bufsize 32768, s/g segs 256
><5>[   25.315963] st 7:0:4:0: Attached scsi tape st0
><6>[   25.315965] st 7:0:4:0: st0: try direct i/o: yes (alignment 4 B)
><6>[   25.319570] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
><6>[   25.320218] EDAC amd64_edac:  Ver: 3.2.0 Oct 27 2009
><4>[   25.323285] EDAC amd64: This node reports that Memory ECC is currently disabled.
><4>[   25.323289] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
><4>[   25.323356] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
><4>[   25.323358]     Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
><4>[   25.323359]     Might be a BIOS bug, if BIOS says ECC is enabled
><4>[   25.323360]     Use of the override can cause unknown side effects.
><4>[   25.323392] amd64_edac: probe of 0000:00:18.2 failed with error -22
><6>[   25.342687] Linux video capture interface: v2.00
><4>[   25.356069] saa7146: register extension 'dvb'.
><6>[   25.357148] dvb 0000:03:06.0: PCI->APIC IRQ transform: INT A -> IRQ 20
><4>[   25.357263] IRQ 20/: IRQF_DISABLED is not guaranteed on shared IRQs
><4>[   25.357291] saa7146: found saa7146 @ mem ffffc9000064e000 (revision 1, irq 20) (0x13c2,0x0002).
><6>[   25.357303] dvb 0000:03:06.0: firmware: requesting dvb-ttpci-01.fw
><6>[   25.367609] DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-C rev2.X)
><6>[   25.379696] ov511 3-2:1.0: USB OV511+ video device found
><6>[   25.380522] usb 3-2: model: Generic Camera (no ID)
><6>[   25.402456] osst :I: Tape driver with OnStream support version 0.99.4
><6>[   25.402458] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
><4>[   25.406089] adapter has MAC addr = 00:d0:5c:22:e3:f5
><6>[   25.415392] dvb 0000:03:06.0: firmware: requesting av7110/bootcode.bin
><6>[   25.432464] HDA Intel 0000:00:14.2: PCI->APIC IRQ transform: INT A -> IRQ 16
><6>[   25.563746] nvidia 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
><7>[   25.563755] nvidia 0000:01:00.0: setting latency timer to 64
><4>[   25.563929] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
><6>[   25.653797] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input3
><4>[   25.659553] dvb-ttpci: gpioirq unknown type=0 len=0
><4>[   25.676175] dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
><4>[   25.676179] dvb-ttpci: firmware @ card 0 supports CI link layer interface
><4>[   25.749079] dvb-ttpci: adac type set to 0 @ card 0
><4>[   25.751117] saa7146_vv: saa7146 (0): registered device video0 [v4l2]
><4>[   25.751138] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
><6>[   25.788647] usb 3-2: Sensor is an OV7620
><4>[   25.825467] DVB: registering adapter 0 frontend 0 (VLSI VES1820 DVB-C)...
><6>[   25.825622] input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:14.4/0000:03:06.0/input/input4
><6>[   25.825659] dvb-ttpci: found av7110-0.
><6>[   25.827755] ohci1394 0000:03:0e.0: PCI->APIC IRQ transform: INT A -> IRQ 22
><6>[   25.878076] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fddfd000-fddfd7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
><6>[   26.694009] ov511 3-2:1.0: Device at usb-0000:00:13.1-2 registered to minor 2
><7>[   27.134502] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00db74a000001d7d]
><6>[  205.279677] Adding 8193140k swap on /dev/sdb1.  Priority:-1 extents:1 across:8193140k 
><6>[  205.992151] device-mapper: uevent: version 1.0.3
><6>[  205.992720] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
><6>[  206.059652] loop: module loaded
><6>[  206.086010] fuse init (API version 7.12)
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.

Actions: View

Attachments on bug 559048: 329908 | 329909 | 329910 | 329911 | 329912