Attachment 373692 Details for Bug 617743

NetworkManager --no-daemon output

NetworkManager.log (text/x-log), 7.06 KB, created by Thomas Frühbeck on 2010-07-03 13:22:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas Frühbeck

Created: 2010-07-03 13:22:34 UTC

Size: 7.06 KB

patch

obsolete

>happy:~ # rcnetwork stop
>Shutting down the NetworkManager                                                                                                 done
>ATTENTION: You have modified /etc/resolv.conf.  Leaving it untouched...
>You can find my version in /etc/resolv.conf.netconfig ...
>Shutting down network interfaces:
>    eth0      device: Marvell Technology Group Ltd. 88E8042 PCI-E Fast Ethernet Controller (rev 10)
>    eth0                                                                                                                         done
>    eth1      device: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
>              No configuration found for eth1 
>              Nevertheless the interface will be shut down.
>    eth1                                                                                                                         done
>Shutting down service network  .  .  .  .  .  .  .  .  .                                                                         done
>happy:~ # killall NetworkManager
>NetworkManager: no process found
>happy:~ # rm /etc/resolv.conf*
>happy:~ # rn /var/log/NetworkManager
>If 'rn' is not a typo you can use command-not-found to lookup the package that contains it, like this:
>    cnf rn
>happy:~ # rm /var/log/NetworkManager
>happy:~ # NetworkManager --no-daemon
>NetworkManager: <info>  starting...
>NetworkManager: <info>  modem-manager is now available
>NetworkManager: Loaded plugin ifcfg-suse: (C) 2008 Novell, Inc.  To report bugs please use the NetworkManager mailing list.
>NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
>NetworkManager: <info>  Found wlan radio killswitch rfkill0 (at /sys/devices/platform/hp-wmi/rfkill/rfkill0) (driver hp-wmi)
>NetworkManager: <info>  WiFi disabled by radio killswitch; disabled by state file
>NetworkManager: <info>  WWAN enabled by radio killswitch; enabled by state file
>NetworkManager: <info>  (eth0): carrier is OFF
>NetworkManager: <info>  (eth0): new Ethernet device (driver: 'sky2')
>NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
>NetworkManager: <info>  (eth0): now managed
>NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
>NetworkManager: <info>  (eth0): bringing up device.
>NetworkManager: <info>  (eth0): preparing device.
>NetworkManager: <info>  (eth0): deactivating device (reason: 2).
>NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/net/eth0
>NetworkManager: <info>  (eth1): driver supports SSID scans (scan_capa 0x01).
>NetworkManager: <info>  (eth1): new 802.11 WiFi device (driver: 'wl')
>NetworkManager: <info>  (eth1): exported as /org/freedesktop/NetworkManager/Devices/1
>NetworkManager: <info>  (eth1): now managed
>NetworkManager: <info>  (eth1): device state change: 1 -> 2 (reason 2)
>NetworkManager: <info>  (eth1): bringing up device.
>NetworkManager: <info>  (eth1): deactivating device (reason: 2).
>-- Error received: File exists
>-- Original message: type=0x14 length=56 flags=<REQUEST,ACK,ATOMIC> sequence-nr=1278163052 pid=4199882
>NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
>NetworkManager: <info>  (eth0): carrier now ON (device state 2)
>NetworkManager: <info>  (eth0): device state change: 2 -> 3 (reason 40)
>NetworkManager: <info>  Activation (eth0) starting connection 'Auto eth0'
>NetworkManager: <info>  (eth0): device state change: 3 -> 4 (reason 0)
>NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
>NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) started...
>NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
>NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
>NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) starting...
>NetworkManager: <info>  (eth0): device state change: 4 -> 5 (reason 0)
>NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) successful.
>NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
>NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) complete.
>NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
>NetworkManager: <info>  (eth0): device state change: 5 -> 7 (reason 0)
>NetworkManager: <info>  Activation (eth0) Beginning DHCP transaction (timeout in 45 seconds)
>NetworkManager: <info>  dhclient started with pid 5580
>NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP6 Configure Get) scheduled...
>NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
>NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP6 Configure Get) started...
>NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP6 Configure Get) complete.
>Internet Systems Consortium DHCP Client 4.1.1-P1
>Copyright 2004-2010 Internet Systems Consortium.
>All rights reserved.
>For info, please visit https://www.isc.org/software/dhcp/
>
>NetworkManager: <info>  DHCP: device eth0 state changed (null) -> preinit
>Listening on LPF/eth0/00:25:b3:5a:0c:9b
>Sending on   LPF/eth0/00:25:b3:5a:0c:9b
>Sending on   Socket/fallback
>DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
>DHCPOFFER from 10.0.0.138
>DHCPREQUEST on eth0 to 255.255.255.255 port 67
>DHCPACK from 10.0.0.138
>bound to 10.0.0.3 -- renewal in 2147483648 seconds.
>NetworkManager: <info>  DHCP: device eth0 state changed preinit -> bound
>NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled...
>NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started...
>NetworkManager: <info>    address 10.0.0.3
>NetworkManager: <info>    prefix 24 (255.255.255.0)
>NetworkManager: <info>    nameserver '10.0.0.138'
>NetworkManager: <info>    nameserver '195.3.96.67'
>NetworkManager: <info>    nameserver '195.3.96.68'
>NetworkManager: <info>    domain name 'fruehbeck.at'
>NetworkManager: <info>    wins '10.0.0.138'
>NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
>NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete.
>NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
>NetworkManager: <debug> [1278163076.026091] run_netconfig(): Spawning '/sbin/netconfig modify --service NetworkManager'
>NetworkManager: <debug> [1278163076.031271] write_to_netconfig(): Writing to netconfig: INTERFACE='eth0'
>
>NetworkManager: <debug> [1278163076.031526] write_to_netconfig(): Writing to netconfig: DNSSEARCH='fruehbeck.at fruehbeck.at'
>
>NetworkManager: <debug> [1278163076.031573] write_to_netconfig(): Writing to netconfig: DNSSERVERS='10.0.0.138 195.3.96.67 195.3.96.68'
>
>NetworkManager: <info>  Clearing nscd hosts cache.
>sent invalidate(hosts) request, exiting
>NetworkManager: <info>  (eth0): device state change: 7 -> 8 (reason 0)
>NetworkManager: <info>  Activation (eth0) successful, device activated.
>NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.

Actions: View

Attachments on bug 617743: 372258 | 373035 | 373036 | 373670 | 373692