Attachment 45064 Details for Bug 102329

dmesg of tsieden's home sytem

dmesg (text/plain), 27.87 KB, created by Thomas Siedentopf on 2005-08-06 17:52:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas Siedentopf

Created: 2005-08-06 17:52:01 UTC

Size: 27.87 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/sda3 vga=0x31a selinux=0  splash=silent console=tty0 resume=/dev/sda2  showopts)
>Linux version 2.6.11.4-21.8-default (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Tue Jul 19 12:42:37 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 Nvidia                                ) @ 0x00000000000f76f0
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c0
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x000000003fff94c0
>ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0x000000003fff95c0
>ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff96c0
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9400
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
>On node 0 totalpages: 262128
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 258032 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>Nvidia board detected. Ignoring ACPI timer override.
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Checking aperture...
>CPU 0: aperture @ 98000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Built 1 zonelists
>Kernel command line: root=/dev/sda3 vga=0x31a selinux=0  splash=silent console=tty0 resume=/dev/sda2  showopts
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 1.193182 MHz PIT timer.
>time.c: Detected 1809.278 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Memory: 1023812k/1048512k available (2167k kernel code, 23928k reserved, 1160k data, 168k init)
>Calibrating delay loop... 3588.09 BogoMIPS (lpj=1794048)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
>checking if image is initramfs... it is
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>Using local APIC NMI watchdog using perfctr0
>Using local APIC timer interrupts.
>Detected 12.564 MHz APIC timer.
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20050211
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:09.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1123351415.386:0): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000080000, using 10240k, total 131072k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81978 bytes,<6>...found (1280x1024, 54169 bytes, v3).
>Console: switching to colour frame buffer device 158x59
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 8192 buckets, 64Kbytes
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>NET: Registered protocol family 1
>PM: Checking swsusp image.
>PM: Resume from disk failed.
>ACPI wakeup devices: 
>HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 168k freed
>SCSI subsystem initialized
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
>NFORCE-CK804: chipset revision 242
>NFORCE-CK804: not 100% native mode: will probe irqs later
>NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: TOSHIBA DVD-ROM SD-M1402, ATAPI CD/DVD-ROM drive
>input: AT Translated Set 2 keyboard on isa0060/serio0
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>libata version 1.10 loaded.
>sata_nv version 0.6
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 23 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 177
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 177
>ata1: no device found (phy stat 00000000)
>scsi0 : sata_nv
>ata2: no device found (phy stat 00000000)
>scsi1 : sata_nv
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 22 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 185
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 185
>ata3: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7468 86:3c01 87:4023 88:40ff
>ata3: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>Losing some ticks... checking if CPU frequency changed.
>ata3: dev 0 configured for UDMA/133
>scsi2 : sata_nv
>ata4: no device found (phy stat 00000000)
>scsi3 : sata_nv
>  Vendor: ATA       Model: SAMSUNG SP2504C   Rev: VT10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>SCSI device sda: drive cache: write back
> sda:<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda1 sda2 sda3 sda4
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
>hda: ATAPI 40X DVD-ROM drive, 128kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Attempting manual resume
>PM: Checking swsusp image.
>swsusp: Suspend partition has wrong signature?
>PM: Resume from disk failed.
>ReiserFS: sda3: found reiserfs format "3.6" with standard journal
>ReiserFS: sda3: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda3: checking transaction log (sda3)
>reiserfs: disabling flush barriers on sda3
>ReiserFS: sda3: Using r5 hash to sort names
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>cdrom: open failed.
>ReiserFS: sda4: found reiserfs format "3.6" with standard journal
>ReiserFS: sda4: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda4: checking transaction log (sda4)
>reiserfs: disabling flush barriers on sda4
>ReiserFS: sda4: Using r5 hash to sort names
>NTFS driver 2.1.22 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>Capability LSM initialized
>ieee1394: Initialized config rom entry `ip1394'
>ieee1394: raw1394: /dev/raw1394 device initialized
>video1394: Installed video1394 module
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>Adding 2104504k swap on /dev/sda2.  Priority:42 extents:1
>bootsplash: status on console 0 changed to on
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.31.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
>ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 21 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>load_module: err 0xffffffffffffffef (dont worry)
>eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
>ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 20 (level, low) -> IRQ 201
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: irq 201, pci mem 0xd0004000
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 23 (level, low) -> IRQ 177
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: irq 177, pci mem 0xfeb00000
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: park 0
>ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>intel8x0_measure_ac97_clock: measured 49657 usecs
>intel8x0: clocking to 46889
>ohci_hcd 0000:00:02.0: wakeup
>usb 2-4: new high speed USB device using ehci_hcd and address 4
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>usb 1-2: new low speed USB device using ohci_hcd and address 2
>usb 1-3: new full speed USB device using ohci_hcd and address 3
>usb 1-5: new low speed USB device using ohci_hcd and address 4
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff80406260(lo)
>IPv6 over IPv4 tunneling driver
>Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0,  type 0
>Disabled Privacy Extensions on device ffff81003a99a800(sit0)
>cdrom: open failed.
>usbcore: registered new driver hiddev
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2
>Initializing USB Mass Storage driver...
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>st: Version 20041025, fixed bufsize 32768, s/g segs 256
>eth0: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>ACPI: Power Button (FF) [PWRF]
>ACPI: Fan [FAN] (on)
>    ACPI-0484: *** Warning: Error getting cpuindex for acpiid 0x1
>ACPI: Thermal Zone [THRM] (40 C)
>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e)
>powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
>powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
>cpu_init done, current fid 0xa, vid 0x6
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
>drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
>drivers/usb/input/hid-core.c: timeout initializing reports
>
>input: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:00:02.0-5
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new driver usbserial_generic
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module  1.0-7667  Fri Jun 17 07:14:03 PDT 2005
>bootsplash: status on console 0 changed to on
>  Vendor: ICSI      Model: CF Card       CF  Rev: 1.6B
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdb at scsi4, channel 0, id 0, lun 0
>Attached scsi generic sg1 at scsi4, channel 0, id 0, lun 0,  type 0
>  Vendor: ICSI      Model: MS Card       MS  Rev: 1.6B
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdc at scsi4, channel 0, id 0, lun 1
>Attached scsi generic sg2 at scsi4, channel 0, id 0, lun 1,  type 0
>  Vendor: ICSI      Model: SD Card   MMC/SD  Rev: 1.6B
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdd at scsi4, channel 0, id 0, lun 2
>Attached scsi generic sg3 at scsi4, channel 0, id 0, lun 2,  type 0
>  Vendor: ICSI      Model: sm/xdCard     SM  Rev: 1.6B
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sde at scsi4, channel 0, id 0, lun 3
>Attached scsi generic sg4 at scsi4, channel 0, id 0, lun 3,  type 0
>usb-storage: device scan complete
>subfs 0.9
>UDF-fs: No VRS found
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>attempt to access beyond end of device
>hda: rw=0, want=16624944, limit=8388604
>Buffer I/O error on device hda, logical block 4156235
>attempt to access beyond end of device
>hda: rw=0, want=16624944, limit=8388604
>Buffer I/O error on device hda, logical block 4156235
>UDF-fs: No VRS found
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>attempt to access beyond end of device
>hda: rw=0, want=16624940, limit=8388604
>Buffer I/O error on device hda, logical block 4156234
>attempt to access beyond end of device
>hda: rw=0, want=16624940, limit=8388604
>Buffer I/O error on device hda, logical block 4156234
>cdrom: open failed.
>cdrom: open failed.
>cdrom: open failed.
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>UDF-fs: No VRS found
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>attempt to access beyond end of device
>hda: rw=0, want=16624944, limit=8388604
>Buffer I/O error on device hda, logical block 4156235
>attempt to access beyond end of device
>hda: rw=0, want=16624944, limit=8388604
>Buffer I/O error on device hda, logical block 4156235
>UDF-fs: No VRS found
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>attempt to access beyond end of device
>hda: rw=0, want=16624940, limit=8388604
>Buffer I/O error on device hda, logical block 4156234
>attempt to access beyond end of device
>hda: rw=0, want=16624940, limit=8388604
>Buffer I/O error on device hda, logical block 4156234
>attempt to access beyond end of device
>hda: rw=0, want=16624944, limit=8388604
>Buffer I/O error on device hda, logical block 4156235
>attempt to access beyond end of device
>hda: rw=0, want=16624944, limit=8388604
>Buffer I/O error on device hda, logical block 4156235
>attempt to access beyond end of device
>hda: rw=0, want=16624940, limit=8388604
>Buffer I/O error on device hda, logical block 4156234
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>VFS: busy inodes on changed media.
>VFS: busy inodes on changed media.
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>gimp[9502]: segfault at 00002aaa00008001 rip 00002aaaab6e6016 rsp 00007fffffffc6f0 error 4
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>gnome-theme-man[9730] general protection rip:2aaaae5bbdb1 rsp:7fffffffc490 error:0
>gnome-theme-man[9828] general protection rip:2aaaae5bbdb1 rsp:7fffffffc4e0 error:0
>gnome-theme-man[9836] general protection rip:2aaaae5bbdb1 rsp:7fffffffc490 error:0
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>vmmon: no version for "struct_module" found: kernel tainted.
>vmmon: module not supported by Novell, setting U taint flag.
>/dev/vmmon[19030]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[19030]: Module vmmon: initialized
>/dev/vmmon[19036]: Module vmmon: unloaded
>vmnet: module not supported by Novell, setting U taint flag.
>vmmon: module not supported by Novell, setting U taint flag.
>/dev/vmmon[19229]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[19229]: Module vmmon: initialized
>vmnet: module not supported by Novell, setting U taint flag.
>/dev/vmnet: open called by PID 19255 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 19287 (vmware-vmx)
>eth0: Promiscuous mode enabled.
>device eth0 entered promiscuous mode
>bridge-eth0: enabled promiscuous mode
>/dev/vmnet: port on hub 0 successfully opened
>/dev/vmmon[19294]: host clock rate change request 0 -> 19
>/dev/vmmon[19294]: host clock rate change request 19 -> 83
>device eth0 left promiscuous mode
>bridge-eth0: disabled promiscuous mode
>/dev/vmnet: open called by PID 19294 (vmware-vmx)
>eth0: Promiscuous mode enabled.
>device eth0 entered promiscuous mode
>bridge-eth0: enabled promiscuous mode
>/dev/vmnet: port on hub 0 successfully opened
>device eth0 left promiscuous mode
>bridge-eth0: disabled promiscuous mode
>/dev/vmnet: open called by PID 19294 (vmware-vmx)
>eth0: Promiscuous mode enabled.
>device eth0 entered promiscuous mode
>bridge-eth0: enabled promiscuous mode
>/dev/vmnet: port on hub 0 successfully opened
>/dev/vmmon[19294]: host clock rate change request 83 -> 19
>device eth0 left promiscuous mode
>bridge-eth0: disabled promiscuous mode
>/dev/vmmon[19287]: host clock rate change request 19 -> 0
>vmmon: Had to deallocate locked 97007 pages from vm driver ffff81001af28000
>vmmon: Had to deallocate AWE 2597 pages from vm driver ffff81001af28000
>cdrom: open failed.
>cdrom: open failed.
>subfs: unsuccessful attempt to mount media (256)
>cdrom: open failed.
>cdrom: open failed.
>subfs: unsuccessful attempt to mount media (256)
>cdrom: open failed.
>cdrom: open failed.
>subfs: unsuccessful attempt to mount media (256)
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>NET: Registered protocol family 15
>Initializing IPsec netlink socket
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>usb 2-7: new high speed USB device using ehci_hcd and address 6
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>hub 2-0:1.0: Cannot enable port 7.  Maybe the USB cable is bad?
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>usb 2-7: new high speed USB device using ehci_hcd and address 7
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>usb 2-7: configuration #1 chosen from 2 choices
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>usb 2-7: reset high speed USB device using ehci_hcd and address 7
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>usb 2-7: device descriptor read/64, error -71
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>hub 2-0:1.0: Cannot enable port 7.  Maybe the USB cable is bad?
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>hub 2-0:1.0: Cannot enable port 7.  Maybe the USB cable is bad?
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>usb 2-7: reset high speed USB device using ehci_hcd and address 7
>usb 2-7: device not accepting address 7, error -71
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>usb 2-7: reset high speed USB device using ehci_hcd and address 7
>usb 2-7: device not accepting address 7, error -71
>scsi: Device offlined - not ready after error recovery: host 5 channel 0 id 0 lun 0
>usb 2-7: USB disconnect, address 7
>usb-storage: device scan complete
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>ehci_hcd 0000:00:02.1: port 7 reset error -110
>hub 2-0:1.0: hub_port_status failed (err = -32)
>usb 2-7: new high speed USB device using ehci_hcd and address 8

Actions: View

Attachments on bug 102329: 44952 | 45064 | 45065 | 45085 | 45086