Attachment 45121 Details for Bug 102543

dmesg.out

dmesg.out (text/plain), 22.58 KB, created by Hannes Reinecke on 2005-08-08 12:30:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Hannes Reinecke

Created: 2005-08-08 12:30:56 UTC

Size: 22.58 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/sda1 vga=0x31a selinux=0  splash=silent resume=/dev/sda2  splash=silent)
>Linux version 2.6.13-rc5-git3-3-smp (geeko@buildhost) (gcc version 4.0.2 20050802 (prerelease) (SUSE Linux)) #1 SMP Fri Aug 5 14:06:24 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
> BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
> BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000f60f0
>ACPI: RSDT (v001 INTEL  D865GBF  0x20031118 MSFT 0x00000097) @ 0x000000003ff30000
>ACPI: FADT (v002 INTEL  D865GBF  0x20031118 MSFT 0x00000097) @ 0x000000003ff30200
>ACPI: MADT (v001 INTEL  D865GBF  0x20031118 MSFT 0x00000097) @ 0x000000003ff30300
>ACPI: ASF! (v016 LEGEND I865PASF 0x00000001 MSFT 0x0100000d) @ 0x000000003ff34550
>ACPI: TCPA (v001 INTEL  TBLOEMID 0x00000001 MSFT 0x00000097) @ 0x000000003ff345e9
>ACPI: WDDT (v001 INTEL  OEMWDDT  0x00000001 MSFT 0x0100000d) @ 0x000000003ff3461d
>ACPI: DSDT (v001 INTEL  D865GBF  0x00000001 MSFT 0x0100000d) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ff30000
>Bootmem setup node 0 0000000000000000-000000003ff30000
>On node 0 totalpages: 261936
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 257840 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 40000000:becf0000)
>Checking aperture...
>Built 1 zonelists
>Kernel command line: root=/dev/sda1 vga=0x31a selinux=0  splash=silent resume=/dev/sda2  splash=silent
>bootsplash: silent mode.
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 1995.185 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Memory: 1018172k/1047744k available (2502k kernel code, 0k reserved, 1360k data, 212k init)
>Calibrating delay using timer specific routine.. 3997.06 BogoMIPS (lpj=7994120)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>mtrr: v2.0 (20020519)
>checking if image is initramfs... it is
>ACPI: Looking for DSDT in initrd... not found!
> not found!
> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
>Parsing all Control Methods:...........................................................................................................................................................................
>Table [DSDT](id F004) - 625 Objects with 52 Devices 171 Methods 22 Regions
>ACPI Namespace successfully loaded at root ffffffff8056bb80
>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>Detected 8.313 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.67 BogoMIPS (lpj=7981354)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU1: Thermal monitoring enabled (TM1)
>                   Genuine Intel(R) CPU 2.00GHz stepping 01
>APIC error on CPU1: 00(40)
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff -7 cycles, maxerr 863 cycles)
>Brought up 2 CPUs
>time.c: Using PIT/TSC based timekeeping.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1024 [06] ev_create_gpe_block   : Found 9 Wake, Enabled 0 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:...................................................................................................................
>Initialized 21/22 Regions 29/29 Fields 48/48 Buffers 17/17 Packages (634 nodes)
>Executing all Device _STA and_INI methods:........................................................
>56 Devices found containing: 56 _STA, 1 _INI methods
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Bridge: 0000:00:01.0
>  IO window: a000-afff
>  MEM window: ff700000-ff7fffff
>  PREFETCH window: d6b00000-f6afffff
>PCI: Bridge: 0000:00:03.0
>  IO window: b000-bfff
>  MEM window: ff800000-ff8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: ff900000-ff9fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1123483468.148:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xe8000000, mapped to 0xffffc20000080000, using 10240k, total 131072k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=50
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>mtrr: type mismatch for e8000000,8000000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,4000000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,2000000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,1000000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,800000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,400000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,200000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,100000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,80000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,40000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,20000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,10000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,8000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,4000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,2000 old: write-back new: write-combining
>mtrr: type mismatch for e8000000,1000 old: write-back new: write-combining
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104443 bytes,<6>...found (1280x1024, 54169 bytes, v3).
>Console: switching to colour frame buffer device 158x59
>fb0: VESA VGA frame buffer device
>irq 9: nobody cared (try booting with the "irqpoll" option)
>
>Call Trace: <IRQ> <ffffffff80165645>{__report_bad_irq+53} <ffffffff801658ba>{note_interrupt+538}
>       <ffffffff8025fd36>{acpi_irq+15} <ffffffff80165043>{__do_IRQ+259}
>       <ffffffff80111d68>{do_IRQ+72} <ffffffff8010f342>{ret_from_intr+0}
>        <EOI> <ffffffff8023bea5>{vsnprintf+117} <ffffffff8023c5a1>{sprintf+81}
>       <ffffffff802992d4>{tty_register_device+148} <ffffffff80195270>{exact_match+0}
>       <ffffffff8029955c>{tty_register_driver+572} <ffffffff805bc1e2>{pty_init+562}
>       <ffffffff8010c242>{init+498} <ffffffff8010fa52>{child_rip+8}
>       <ffffffff8010c050>{init+0} <ffffffff8010fa4a>{child_rip+0}
>       
>handlers:
>[<ffffffff8025fd27>] (acpi_irq+0x0/0x1a)
>Disabling IRQ #9
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>input: AT Translated Set 2 keyboard on isa0060/serio0
>TANA P0P3 AC97 USB0 USB1 USB2 USB3 USB7 UAR1 SLPB 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 212k freed
>SCSI subsystem initialized
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>acpi_bus-0212 [4294965897] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: irq 169, io mem 0xffaffc00
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usbcore: registered new driver hiddev
>usb 1-1.1: new low speed USB device using ehci_hcd and address 3
>usb 1-1.2: new low speed USB device using ehci_hcd and address 4
>usb 1-1.3: new full speed USB device using ehci_hcd and address 5
>input: USB HID v1.00 Mouse [1241:1122] on usb-0000:00:1d.7-1.1
>input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.7-1.2
>input: USB HID v1.10 Mouse [CHESEN USB Keyboard] on usb-0000:00:1d.7-1.2
>input: USB HID v1.01 Keyboard [ATEN 4Ports USB KVM C] on usb-0000:00:1d.7-1.3
>input: USB HID v1.00 Mouse [ATEN 4Ports USB KVM C] on usb-0000:00:1d.7-1.3
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000cc00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000d000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 193, io base 0x0000d400
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000d800
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 193
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
>Losing some ticks... checking if CPU frequency changed.
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>hdc: COMBI RW32/DVD, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(44)
>Uniform CD-ROM driver Revision: 3.20
>libata version 1.11 loaded.
>ata_piix version 1.03
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 193
>ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 193
>ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
>ata1: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48
>ata1: dev 0 configured for UDMA/133
>scsi0 : ata_piix
>ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
>ata2: dev 0 ATAPI, max UDMA/33
>ata2(0): applying bridge limits
>ata2: dev 0 configured for UDMA/33
>scsi1 : ata_piix
>  Vendor: ATA       Model: ST3120026AS       Rev: 3.05
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: PLEXTOR   Model: DVDR   PX-712A    Rev: 1.05
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>Assertion failed! qc->flags & ATA_QCFLAG_ACTIVE,drivers/scsi/libata-core.c,atapi_packet_task,line=3621
>ATA: abnormal status 0x58 on port 0xE407
>ATA: abnormal status 0x58 on port 0xE407
>ATA: abnormal status 0x58 on port 0xE407
>ATA: abnormal status 0x58 on port 0xE407
>ata2: dev 0: ATAPI check failed
>ata2: PIO error, drv_stat 0xd0
>Assertion failed! qc->flags & ATA_QCFLAG_ACTIVE,drivers/scsi/libata-core.c,ata_qc_complete,line=3089
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>scsi: On host 1 channel 0 id 0 only 511 (max_scsi_report_luns) of 234881184 luns reported, try increasing max_scsi_report_luns.
>scsi: host 1 channel 0 id 0 lun 0x0000000020000000 has a LUN larger than currently supported.
>scsi: host 1 channel 0 id 0 lun 0x00006275732f7363 has a LUN larger than currently supported.
>scsi: host 1 channel 0 id 0 lun29545 has a LUN larger than allowed by the host adapter
>Assertion failed! qc != NULL,drivers/scsi/libata-core.c,atapi_packet_task,line=3620
>Unable to handle kernel NULL pointer dereference at 0000000000000048 RIP: 
><ffffffff880fd1a0>{:libata:atapi_packet_task+80}
>PGD 3e7d4067 PUD 3e114067 PMD 0 
>Oops: 0000 [1] SMP 
>CPU 0 
>Modules linked in: ata_piix ahci libata piix uhci_hcd usbhid ehci_hcd usbcore ide_disk ide_cd ide_core sr_mod cdrom sd_mod scsi_mod
>Pid: 1250, comm: ata/0 Not tainted 2.6.13-rc5-git3-3-smp
>RIP: 0010:[<ffffffff880fd1a0>] <ffffffff880fd1a0>{:libata:atapi_packet_task+80}
>RSP: 0018:ffff81003e76be28  EFLAGS: 00010292
>RAX: 000000000000005a RBX: ffff81003e7b7428 RCX: ffffc20000cd360a
>RDX: 00000000ffffff01 RSI: 0000000000000246 RDI: ffffffff8044b620
>RBP: 0000000000000000 R08: ffff81003f410b10 R09: ffffc2000055260a
>R10: 0000000000000008 R11: 000000000000ff00 R12: ffff81003f508000
>R13: ffff81003e7b7428 R14: 0000000000000206 R15: ffffffff880fd150
>FS:  0000000000000000(0000) GS:ffffffff80588800(0000) knlGS:0000000000000000
>CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
>CR2: 0000000000000048 CR3: 000000003e5ea000 CR4: 00000000000006e0
>Process ata/0 (pid: 1250, threadinfo ffff81003e76a000, task ffff81003e6fb680)
>Stack: 0000000000000292 ffff81003e7b7a38 ffff81003e7b7a40 ffffffff8014e08e 
>       ffffffff805d2800 ffff81003f508040 ffff81003f508018 ffff81003f508028 
>       0000000000000000 ffff81003e6fb680 
>Call Trace:<ffffffff8014e08e>{worker_thread+478} <ffffffff801372c0>{default_wake_function+0}
>       <ffffffff80152cc0>{keventd_create_kthread+0} <ffffffff8014deb0>{worker_thread+0}
>       <ffffffff80152cc0>{keventd_create_kthread+0} <ffffffff80152f73>{kthread+243}
>       <ffffffff80137e30>{schedule_tail+64} <ffffffff8010fa52>{child_rip+8}
>       <ffffffff80152cc0>{keventd_create_kthread+0} <ffffffff80152e80>{kthread+0}
>       <ffffffff8010fa4a>{child_rip+0} 
>
>Code: f6 45 48 02 75 2a 41 b8 25 0e 00 00 48 c7 c1 70 81 10 88 48 
>RIP <ffffffff880fd1a0>{:libata:atapi_packet_task+80} RSP <ffff81003e76be28>
>CR2: 0000000000000048
> <5>ReiserFS: sda1: found reiserfs format "3.6" with standard journal
>ReiserFS: sda1: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda1: checking transaction log (sda1)
>ReiserFS: sda1: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ieee1394: Initialized config rom entry `ip1394'
>ieee1394: raw1394: /dev/raw1394 device initialized
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 185
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185]  MMIO=[ff9ff800-ff9fffff]  Max Packet=[2048]
>video1394: Installed video1394 module
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0001080020018bce]
>agpgart: Detected an Intel 865 Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hw_random hardware driver 1.0.0 loaded
>Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI
>Copyright (c) 1999-2005 Intel Corporation.
>acpi_bus-0212 [4294965897] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=0)
>tpm: module not supported by Novell, setting U taint flag.
>tpm_atmel: module not supported by Novell, setting U taint flag.
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>tpm_nsc: module not supported by Novell, setting U taint flag.
>tpm_infineon: module not supported by Novell, setting U taint flag.
>tpm_inf 0000:00:1f.0: LPC-bus found at 0x24d0
>tpm_inf 0000:00:1f.0: No Infineon TPM found!
>module_usb[4616]: main: action = 'add'
>module_usb[4616]: add: PRODUCT='(null)', TYPE = '(null)'
>module_usb[4616]: add: missing an environment variable, aborting.
>module_usb[4636]: main: action = 'add'
>module_usb[4636]: add: PRODUCT='(null)', TYPE = '(null)'
>module_usb[4636]: add: missing an environment variable, aborting.
>module_usb[4628]: main: action = 'add'
>module_usb[4628]: add: PRODUCT='(null)', TYPE = '(null)'
>module_usb[4628]: add: missing an environment variable, aborting.
>module_usb[4642]: main: action = 'add'
>module_usb[4642]: add: PRODUCT='(null)', TYPE = '(null)'
>module_usb[4642]: add: missing an environment variable, aborting.
>module_usb[4665]: main: action = 'add'
>module_usb[4665]: add: PRODUCT='(null)', TYPE = '(null)'
>module_usb[4665]: add: missing an environment variable, aborting.
>module_usb[4740]: main: action = 'add'
>module_usb[4740]: add: PRODUCT='(null)', TYPE = '(null)'
>module_usb[4740]: add: missing an environment variable, aborting.
>module_usb[4784]: main: action = 'add'
>module_usb[4784]: add: PRODUCT='(null)', TYPE = '(null)'
>module_usb[4784]: add: missing an environment variable, aborting.
>module_usb[4791]: main: action = 'add'
>module_usb[4791]: add: PRODUCT='(null)', TYPE = '(null)'
>module_usb[4791]: add: missing an environment variable, aborting.
>module_usb[4803]: main: action = 'add'
>module_usb[4803]: add: PRODUCT='(null)', TYPE = '(null)'
>module_usb[4803]: add: missing an environment variable, aborting.
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff80473900(lo)
>IPv6 over IPv4 tunneling driver
>st: Version 20050501, fixed bufsize 32768, s/g segs 256
>ATA: abnormal status 0x58 on port 0xE407
>ATA: abnormal status 0x58 on port 0xE407
>ATA: abnormal status 0x58 on port 0xE407

Actions: View

Attachments on bug 102543: 45121