Attachment 45230 Details for Bug 102939

This is the output of hwinfo --all

hwinfo.log (text/x-log), 132.00 KB, created by Dieter Bloms on 2005-08-09 06:53:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dieter Bloms

Created: 2005-08-09 06:53:39 UTC

Size: 132.00 KB

patch

obsolete

>============ start hardware log ============
>============ start debug info ============
>libhd version 11.9 (ia32)
>kernel version is 2.6
>----- /proc/cmdline -----
>  BOOT_IMAGE=linux initrd=initrd splash=silent textmode=1 lang=de
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x02138fc4ae17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum +manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc +dsl)
>shm: attached segment 1703938 at 0xb7a32000
>>> floppy.1: get nvram
>----- /proc/nvram -----
>  Checksum status: valid
>  # floppies     : 1
>  Floppy 0 type  : 3.5'' 1.44M
>  Floppy 1 type  : none
>  HD 0 type      : 01
>  HD 1 type      : none
>  HD type 48 data: 16383/79/128 C/H/S, precomp 191, lz 0
>  HD type 49 data: 0/0/128 C/H/S, precomp 128, lz 0
>  DOS base memory: 640 kB
>  Extended memory: 64512 kB (configured), 64512 kB (tested)
>  Gfx adapter    : EGA, VGA, ... (with BIOS)
>  FPU            : installed
>----- /proc/nvram end -----
>>> floppy.2: nvram info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
>/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
>  bios: 1 disks
>  bios: 638k low mem
>/dev/mem[0x9f800, 1]: mmap(, 4096,,,, 0x9f000) ok
>/dev/mem[0x9f800, 2048]: mmap(, 4096,,,, 0x9f000) ok
>  bios: EBDA 0x00800 bytes at 0x9f800
>>> bios.2: rom
>----- SMBIOS Entry Point 0xf7470 - 0xf748e -----
>  f7470  5f 53 4d 5f f4 1f 02 1f 6e 00 00 00 00 00 00 00  "_SM_....n......."
>  f7480  5f 44 4d 49 5f 5d 5c 07 50 fc 0e 00 4e 00 00  "_DMI_]\.P...N.."
>----- SMBIOS Entry Point end -----
>/dev/mem[0xefc50, 1884]: mmap(, 8192,,,, 0xef000) ok
>----- SMBIOS Structure Table 0xefc50 - 0xf03ab -----
>  efc50  00 14 00 00 01 02 27 e3 03 07 80 de f1 7f 00 00  "......'........."
>  efc60  00 00 33 01 46 55 4a 49 54 53 55 20 53 49 45 4d  "..3.FUJITSU SIEM"
>  efc70  45 4e 53 20 2f 2f 20 50 68 6f 65 6e 69 78 20 54  "ENS // Phoenix T"
>  efc80  65 63 68 6e 6f 6c 6f 67 69 65 73 20 4c 74 64 2e  "echnologies Ltd."
>  efc90  00 34 2e 30 36 20 20 52 65 76 2e 20 31 2e 31 36  ".4.06  Rev. 1.16"
>  efca0  2e 31 32 31 39 20 20 20 20 20 20 20 20 20 20 20  ".1219           "
>  efcb0  20 00 30 37 2f 31 39 2f 32 30 30 32 00 00 01 19  " .07/19/2002...."
>  efcc0  01 00 01 02 00 03 59 42 53 58 30 31 39 33 35 31  "......YBSX019351"
>  efcd0  00 30 05 09 40 c7 06 46 55 4a 49 54 53 55 20 53  ".0..@..FUJITSU S"
>  efce0  49 45 4d 45 4e 53 00 53 43 45 4e 49 43 20 4c 00  "IEMENS.SCENIC L."
>  efcf0  59 42 53 58 30 31 39 33 35 31 20 20 20 20 20 20  "YBSX019351      "
>  efd00  20 20 20 20 00 00 02 08 02 00 01 02 03 04 46 55  "    ..........FU"
>  efd10  4a 49 54 53 55 20 53 49 45 4d 45 4e 53 00 44 31  "JITSU SIEMENS.D1"
>  efd20  32 31 39 00 53 32 36 33 36 31 2d 44 31 32 31 39  "219.S26361-D1219"
>  efd30  00 20 20 20 20 20 20 20 20 00 00 03 11 03 00 01  ".        ......."
>  efd40  86 02 03 04 03 03 03 03 00 00 00 00 46 55 4a 49  "............FUJI"
>  efd50  54 53 55 20 53 49 45 4d 45 4e 53 00 53 43 45 4c  "TSU SIEMENS.SCEL"
>  efd60  20 00 59 42 53 58 30 31 39 33 35 31 20 20 20 20  " .YBSX019351    "
>  efd70  20 20 00 20 20 20 20 20 20 20 20 20 20 20 20 20  "  .             "
>  efd80  20 20 20 20 20 20 20 00 00 04 23 04 00 01 03 11  "       ...#....."
>  efd90  02 86 06 00 00 ff fb 83 03 03 02 85 00 78 05 e8  ".............x.."
>  efda0  03 41 04 09 00 0a 00 ff ff 00 00 00 43 50 55 00  ".A..........CPU."
>  efdb0  49 6e 74 65 6c 00 50 65 6e 74 69 75 6d 28 52 29  "Intel.Pentium(R)"
>  efdc0  20 49 49 49 00 00 05 16 05 00 03 04 03 03 09 01  " III............"
>  efdd0  00 00 05 02 03 06 00 07 00 08 00 04 00 00 06 0c  "................"
>  efde0  06 00 01 01 00 00 05 88 88 00 44 49 4d 4d 2d 31  "..........DIMM-1"
>  efdf0  00 00 06 0c 07 00 01 23 00 00 05 88 88 00 44 49  ".......#......DI"
>  efe00  4d 4d 2d 32 00 00 06 0c 08 00 01 45 00 00 05 7f  "MM-2.......E...."
>  efe10  7f 00 44 49 4d 4d 2d 33 00 00 07 13 09 00 01 80  "..DIMM-3........"
>  efe20  01 20 00 20 00 28 00 28 00 00 02 05 05 4c 31 20  ". . .(.(.....L1 "
>  efe30  43 61 63 68 65 00 00 07 13 0a 00 01 81 01 00 01  "Cache..........."
>  efe40  00 01 78 00 08 00 00 02 05 05 4c 32 20 43 61 63  "..x.......L2 Cac"
>  efe50  68 65 00 00 08 09 0b 00 01 00 02 0f 0e 53 4d 73  "he...........SMs"
>  efe60  43 00 50 53 2f 32 20 4d 6f 75 73 65 00 00 08 09  "C.PS/2 Mouse...."
>  efe70  0c 00 01 00 02 0f 0d 53 4d 73 43 00 4b 65 79 62  ".......SMsC.Keyb"
>  efe80  6f 61 72 64 00 00 08 09 0d 00 01 00 02 05 05 53  "oard...........S"
>  efe90  4d 73 43 00 50 61 72 61 6c 6c 65 6c 00 00 08 09  "MsC.Parallel...."
>  efea0  0e 00 01 00 02 08 08 53 4d 73 43 00 53 65 72 69  ".......SMsC.Seri"
>  efeb0  61 6c 2d 31 00 00 08 09 0f 00 01 07 02 00 08 53  "al-1...........S"
>  efec0  4d 73 43 00 53 65 72 69 61 6c 2d 32 00 00 08 09  "MsC.Serial-2...."
>  efed0  10 00 01 17 02 00 00 53 4d 73 43 00 46 6c 6f 70  ".......SMsC.Flop"
>  efee0  70 79 00 00 08 09 11 00 01 16 02 00 00 49 43 48  "py...........ICH"
>  efef0  32 00 50 72 69 6d 61 72 79 20 49 44 45 00 00 08  "2.Primary IDE..."
>  eff00  09 12 00 01 16 02 00 00 49 43 48 32 00 53 65 63  "........ICH2.Sec"
>  eff10  6f 6e 64 61 72 79 20 49 44 45 00 00 08 09 13 00  "ondary IDE......"
>  eff20  01 00 02 12 10 49 43 48 32 00 55 53 42 2d 31 00  ".....ICH2.USB-1."
>  eff30  00 08 09 14 00 01 00 02 12 10 49 43 48 32 00 55  "..........ICH2.U"
>  eff40  53 42 2d 32 00 00 08 09 15 00 01 18 02 00 10 49  "SB-2...........I"
>  eff50  43 48 32 00 55 53 42 2d 33 00 00 08 09 16 00 01  "CH2.USB-3......."
>  eff60  18 02 00 10 49 43 48 32 00 55 53 42 2d 34 00 00  "....ICH2.USB-4.."
>  eff70  08 09 17 00 01 00 02 07 1c 49 6e 74 65 6c 20 38  ".........Intel 8"
>  eff80  31 35 00 56 69 64 65 6f 00 00 09 0d 18 00 01 11  "15.Video........"
>  eff90  05 03 04 01 00 04 01 41 47 50 00 00 09 0d 19 00  ".......AGP......"
>  effa0  01 06 05 03 04 02 00 06 01 50 43 49 2d 31 00 00  ".........PCI-1.."
>  effb0  09 0d 1a 00 01 06 05 03 04 03 00 06 01 50 43 49  ".............PCI"
>  effc0  2d 32 00 00 09 0d 1b 00 01 06 05 03 04 04 00 06  "-2.............."
>  effd0  01 50 43 49 2d 33 00 00 09 0d 1c 00 01 06 05 03  ".PCI-3.........."
>  effe0  04 05 00 06 01 50 43 49 2d 34 00 00 09 0d 1d 00  ".....PCI-4......"
>  efff0  01 06 05 03 04 06 00 06 01 50 43 49 2d 35 00 00  ".........PCI-5.."
>  f0000  7e 0d 1e 00 01 01 01 03 04 01 00 06 01 43 4e 52  "~............CNR"
>  f0010  00 00 09 0d 1f 00 01 03 04 02 04 01 00 02 00 49  "...............I"
>  f0020  53 41 2d 31 00 00 0a 08 20 00 01 01 03 02 53 4d  "SA-1.... .....SM"
>  f0030  73 43 20 53 75 70 65 72 49 2f 4f 00 49 6e 74 65  "sC SuperI/O.Inte"
>  f0040  6c 20 38 31 35 00 00 0b 05 21 00 02 46 55 4a 49  "l 815....!..FUJI"
>  f0050  54 53 55 20 53 49 45 4d 45 4e 53 00 46 55 4a 49  "TSU SIEMENS.FUJI"
>  f0060  54 53 55 20 53 49 45 4d 45 4e 53 20 53 59 53 54  "TSU SIEMENS SYST"
>  f0070  45 4d 00 00 0c 05 22 00 04 44 49 50 31 20 4f 4e  "EM...."..DIP1 ON"
>  f0080  3a 20 52 65 73 65 72 76 65 64 00 44 49 50 32 20  ": Reserved.DIP2 "
>  f0090  4f 4e 3a 20 52 65 63 6f 76 65 72 79 20 42 49 4f  "ON: Recovery BIO"
>  f00a0  53 20 61 63 74 69 76 65 00 44 49 50 33 20 4f 4e  "S active.DIP3 ON"
>  f00b0  3a 20 46 6c 6f 70 70 79 20 44 69 73 6b 20 77 72  ": Floppy Disk wr"
>  f00c0  69 74 65 20 70 72 6f 74 65 63 74 65 64 00 44 49  "ite protected.DI"
>  f00d0  50 34 20 4f 4e 3a 20 52 65 73 65 72 76 65 64 00  "P4 ON: Reserved."
>  f00e0  00 10 0f 23 00 03 03 03 00 00 08 00 fe ff 03 00  "...#............"
>  f00f0  00 00 11 1b 24 00 23 00 fe ff 40 00 40 00 00 01  "....$.#...@.@..."
>  f0100  09 00 01 00 03 80 00 85 00 00 00 00 00 44 49 4d  ".............DIM"
>  f0110  4d 2d 31 00 00 11 1b 25 00 23 00 fe ff 40 00 40  "M-1....%.#...@.@"
>  f0120  00 00 01 09 00 01 00 03 80 00 85 00 00 00 00 00  "................"
>  f0130  44 49 4d 4d 2d 32 00 00 11 1b 26 00 23 00 fe ff  "DIMM-2....&.#..."
>  f0140  00 00 00 00 00 00 09 00 01 00 03 80 00 85 00 00  "................"
>  f0150  00 00 00 44 49 4d 4d 2d 33 00 00 13 0f 27 00 00  "...DIMM-3....'.."
>  f0160  00 00 00 00 00 08 00 23 00 01 00 00 14 13 28 00  ".......#......(."
>  f0170  00 00 00 00 ff ff 03 00 24 00 27 00 01 00 00 00  "........$.'....."
>  f0180  00 14 13 29 00 00 00 04 00 ff ff 07 00 25 00 27  "...).........%.'"
>  f0190  00 01 00 00 00 00 14 13 2a 00 00 00 08 00 00 00  "........*......."
>  f01a0  08 00 26 00 27 00 01 00 00 00 00 20 0b 2b 00 00  "..&.'...... .+.."
>  f01b0  00 00 00 00 00 00 00 00 80 0c 2c 00 01 01 02 01  "..........,....."
>  f01c0  00 01 40 02 41 6c 65 72 74 20 6f 6e 20 4c 41 4e  "..@.Alert on LAN"
>  f01d0  00 46 53 43 5f 42 41 53 49 43 5f 41 4f 4c 5f 30  ".FSC_BASIC_AOL_0"
>  f01e0  32 00 00 b0 10 2d 00 00 00 19 12 00 00 01 00 00  "2....-.........."
>  f01f0  0e ff ff 00 00 b1 0c 2e 00 11 02 16 61 00 00 00  "............a..."
>  f0200  00 00 00 b3 06 2f 00 ff 1f 00 00 b4 0a 30 00 e3  "...../.......0.."
>  f0210  01 f4 40 00 00 00 00 b9 0a 31 00 00 01 00 04 00  "..@......1......"
>  f0220  00 00 00 b9 0a 32 00 01 01 00 01 00 00 00 00 b9  ".....2.........."
>  f0230  08 33 00 02 09 00 00 00 00 b9 08 34 00 03 02 02  ".3.........4...."
>  f0240  e6 00 00 b9 08 35 00 05 02 02 e6 00 00 b9 08 36  ".....5.........6"
>  f0250  00 06 02 02 e6 00 00 b9 08 37 00 07 02 02 e6 00  ".........7......"
>  f0260  00 b9 08 38 00 0a 02 02 e6 00 00 b9 08 39 00 0b  "...8.........9.."
>  f0270  02 02 e6 00 00 b9 08 3a 00 0c 02 02 e6 00 00 b9  ".......:........"
>  f0280  08 3b 00 0d 02 02 e6 00 00 b9 0a 3c 00 0f 01 00  ".;.........<...."
>  f0290  04 00 00 00 00 b9 08 3d 00 10 02 02 e6 00 00 b9  ".......=........"
>  f02a0  08 3e 00 11 02 03 a0 00 00 b9 3d 3f 00 13 07 01  ".>........=?...."
>  f02b0  14 00 00 00 02 2b 00 00 00 03 0a 00 00 00 04 7a  ".....+.........z"
>  f02c0  fe f6 04 05 05 03 00 fb 06 05 03 00 fb 07 21 00  "..............!."
>  f02d0  00 00 08 19 a6 32 02 0a 12 67 3c 02 0b 00 00 00  ".....2...g<....."
>  f02e0  02 00 00 00 00 00 00 00 b9 08 40 00 14 00 00 00  "..........@....."
>  f02f0  00 00 b9 07 41 00 15 0d 01 00 00 b9 08 42 00 16  "....A........B.."
>  f0300  00 02 e6 00 00 b9 08 43 00 17 06 02 00 00 00 b9  ".......C........"
>  f0310  08 44 00 18 02 02 e6 00 00 b9 33 45 00 19 07 0c  ".D........3E...."
>  f0320  05 03 00 fb 0d aa 00 d9 00 0e be 00 f1 00 0f c2  "................"
>  f0330  00 ff 00 10 0a 05 38 3c 11 0a 05 22 24 12 0a 05  "......8<..."$..."
>  f0340  3b 3e 13 15 a6 32 02 00 00 00 00 00 00 00 b9 08  ";>...2.........."
>  f0350  46 00 ff 00 00 00 00 00 ba 0f 47 00 06 09 18 76  "F.........G....v"
>  f0360  aa 00 00 00 06 0b ea 00 00 bb 0c 48 00 01 01 11  "...........H...."
>  f0370  08 09 05 08 23 00 00 bb 0c 49 00 02 01 11 08 09  "....#....I......"
>  f0380  05 08 24 00 00 bb 0c 4a 00 03 01 11 08 09 05 08  "..$....J........"
>  f0390  21 00 00 bc 08 4b 00 38 38 31 24 00 00 bd 07 4c  "!....K.881$....L"
>  f03a0  00 ff 6b 00 00 00 7f 04 4d 00 00 00  "..k.....M..."
>----- SMBIOS Structure Table end -----
>  type 0x00 [0x0000]: 00 14 00 00 01 02 27 e3 03 07 80 de f1 7f 00 00 00 00 33 01
>       str1: "FUJITSU SIEMENS // Phoenix Technologies Ltd."
>       str2: "4.06  Rev. 1.16.1219"
>       str3: "07/19/2002"
>  type 0x01 [0x0001]: 01 19 01 00 01 02 00 03 59 42 53 58 30 31 39 33 35 31 00 30 05 09 40 c7 06
>       str1: "FUJITSU SIEMENS"
>       str2: "SCENIC L"
>       str3: "YBSX019351"
>  type 0x02 [0x0002]: 02 08 02 00 01 02 03 04
>       str1: "FUJITSU SIEMENS"
>       str2: "D1219"
>       str3: "S26361-D1219"
>  type 0x03 [0x0003]: 03 11 03 00 01 86 02 03 04 03 03 03 03 00 00 00 00
>       str1: "FUJITSU SIEMENS"
>       str2: "SCEL"
>       str3: "YBSX019351"
>  type 0x04 [0x0004]: 04 23 04 00 01 03 11 02 86 06 00 00 ff fb 83 03 03 02 85 00 78 05 e8 03 41 04 09 00 0a 00 ff ff 00 00 00
>       str1: "CPU"
>       str2: "Intel"
>       str3: "Pentium(R) III"
>  type 0x05 [0x0005]: 05 16 05 00 03 04 03 03 09 01 00 00 05 02 03 06 00 07 00 08 00 04
>  type 0x06 [0x0006]: 06 0c 06 00 01 01 00 00 05 88 88 00
>       str1: "DIMM-1"
>  type 0x06 [0x0007]: 06 0c 07 00 01 23 00 00 05 88 88 00
>       str1: "DIMM-2"
>  type 0x06 [0x0008]: 06 0c 08 00 01 45 00 00 05 7f 7f 00
>       str1: "DIMM-3"
>  type 0x07 [0x0009]: 07 13 09 00 01 80 01 20 00 20 00 28 00 28 00 00 02 05 05
>       str1: "L1 Cache"
>  type 0x07 [0x000a]: 07 13 0a 00 01 81 01 00 01 00 01 78 00 08 00 00 02 05 05
>       str1: "L2 Cache"
>  type 0x08 [0x000b]: 08 09 0b 00 01 00 02 0f 0e
>       str1: "SMsC"
>       str2: "PS/2 Mouse"
>  type 0x08 [0x000c]: 08 09 0c 00 01 00 02 0f 0d
>       str1: "SMsC"
>       str2: "Keyboard"
>  type 0x08 [0x000d]: 08 09 0d 00 01 00 02 05 05
>       str1: "SMsC"
>       str2: "Parallel"
>  type 0x08 [0x000e]: 08 09 0e 00 01 00 02 08 08
>       str1: "SMsC"
>       str2: "Serial-1"
>  type 0x08 [0x000f]: 08 09 0f 00 01 07 02 00 08
>       str1: "SMsC"
>       str2: "Serial-2"
>  type 0x08 [0x0010]: 08 09 10 00 01 17 02 00 00
>       str1: "SMsC"
>       str2: "Floppy"
>  type 0x08 [0x0011]: 08 09 11 00 01 16 02 00 00
>       str1: "ICH2"
>       str2: "Primary IDE"
>  type 0x08 [0x0012]: 08 09 12 00 01 16 02 00 00
>       str1: "ICH2"
>       str2: "Secondary IDE"
>  type 0x08 [0x0013]: 08 09 13 00 01 00 02 12 10
>       str1: "ICH2"
>       str2: "USB-1"
>  type 0x08 [0x0014]: 08 09 14 00 01 00 02 12 10
>       str1: "ICH2"
>       str2: "USB-2"
>  type 0x08 [0x0015]: 08 09 15 00 01 18 02 00 10
>       str1: "ICH2"
>       str2: "USB-3"
>  type 0x08 [0x0016]: 08 09 16 00 01 18 02 00 10
>       str1: "ICH2"
>       str2: "USB-4"
>  type 0x08 [0x0017]: 08 09 17 00 01 00 02 07 1c
>       str1: "Intel 815"
>       str2: "Video"
>  type 0x09 [0x0018]: 09 0d 18 00 01 11 05 03 04 01 00 04 01
>       str1: "AGP"
>  type 0x09 [0x0019]: 09 0d 19 00 01 06 05 03 04 02 00 06 01
>       str1: "PCI-1"
>  type 0x09 [0x001a]: 09 0d 1a 00 01 06 05 03 04 03 00 06 01
>       str1: "PCI-2"
>  type 0x09 [0x001b]: 09 0d 1b 00 01 06 05 03 04 04 00 06 01
>       str1: "PCI-3"
>  type 0x09 [0x001c]: 09 0d 1c 00 01 06 05 03 04 05 00 06 01
>       str1: "PCI-4"
>  type 0x09 [0x001d]: 09 0d 1d 00 01 06 05 03 04 06 00 06 01
>       str1: "PCI-5"
>  type 0x7e [0x001e]: 7e 0d 1e 00 01 01 01 03 04 01 00 06 01
>       str1: "CNR"
>  type 0x09 [0x001f]: 09 0d 1f 00 01 03 04 02 04 01 00 02 00
>       str1: "ISA-1"
>  type 0x0a [0x0020]: 0a 08 20 00 01 01 03 02
>       str1: "SMsC SuperI/O"
>       str2: "Intel 815"
>  type 0x0b [0x0021]: 0b 05 21 00 02
>       str1: "FUJITSU SIEMENS"
>       str2: "FUJITSU SIEMENS SYSTEM"
>  type 0x0c [0x0022]: 0c 05 22 00 04
>       str1: "DIP1 ON: Reserved"
>       str2: "DIP2 ON: Recovery BIOS active"
>       str3: "DIP3 ON: Floppy Disk write protected"
>       str4: "DIP4 ON: Reserved"
>  type 0x10 [0x0023]: 10 0f 23 00 03 03 03 00 00 08 00 fe ff 03 00
>  type 0x11 [0x0024]: 11 1b 24 00 23 00 fe ff 40 00 40 00 00 01 09 00 01 00 03 80 00 85 00 00 00 00 00
>       str1: "DIMM-1"
>  type 0x11 [0x0025]: 11 1b 25 00 23 00 fe ff 40 00 40 00 00 01 09 00 01 00 03 80 00 85 00 00 00 00 00
>       str1: "DIMM-2"
>  type 0x11 [0x0026]: 11 1b 26 00 23 00 fe ff 00 00 00 00 00 00 09 00 01 00 03 80 00 85 00 00 00 00 00
>       str1: "DIMM-3"
>  type 0x13 [0x0027]: 13 0f 27 00 00 00 00 00 00 00 08 00 23 00 01
>  type 0x14 [0x0028]: 14 13 28 00 00 00 00 00 ff ff 03 00 24 00 27 00 01 00 00
>  type 0x14 [0x0029]: 14 13 29 00 00 00 04 00 ff ff 07 00 25 00 27 00 01 00 00
>  type 0x14 [0x002a]: 14 13 2a 00 00 00 08 00 00 00 08 00 26 00 27 00 01 00 00
>  type 0x20 [0x002b]: 20 0b 2b 00 00 00 00 00 00 00 00
>  type 0x80 [0x002c]: 80 0c 2c 00 01 01 02 01 00 01 40 02
>       str1: "Alert on LAN"
>       str2: "FSC_BASIC_AOL_02"
>  type 0xb0 [0x002d]: b0 10 2d 00 00 00 19 12 00 00 01 00 00 0e ff ff
>  type 0xb1 [0x002e]: b1 0c 2e 00 11 02 16 61 00 00 00 00
>  type 0xb3 [0x002f]: b3 06 2f 00 ff 1f
>  type 0xb4 [0x0030]: b4 0a 30 00 e3 01 f4 40 00 00
>  type 0xb9 [0x0031]: b9 0a 31 00 00 01 00 04 00 00
>  type 0xb9 [0x0032]: b9 0a 32 00 01 01 00 01 00 00
>  type 0xb9 [0x0033]: b9 08 33 00 02 09 00 00
>  type 0xb9 [0x0034]: b9 08 34 00 03 02 02 e6
>  type 0xb9 [0x0035]: b9 08 35 00 05 02 02 e6
>  type 0xb9 [0x0036]: b9 08 36 00 06 02 02 e6
>  type 0xb9 [0x0037]: b9 08 37 00 07 02 02 e6
>  type 0xb9 [0x0038]: b9 08 38 00 0a 02 02 e6
>  type 0xb9 [0x0039]: b9 08 39 00 0b 02 02 e6
>  type 0xb9 [0x003a]: b9 08 3a 00 0c 02 02 e6
>  type 0xb9 [0x003b]: b9 08 3b 00 0d 02 02 e6
>  type 0xb9 [0x003c]: b9 0a 3c 00 0f 01 00 04 00 00
>  type 0xb9 [0x003d]: b9 08 3d 00 10 02 02 e6
>  type 0xb9 [0x003e]: b9 08 3e 00 11 02 03 a0
>  type 0xb9 [0x003f]: b9 3d 3f 00 13 07 01 14 00 00 00 02 2b 00 00 00 03 0a 00 00 00 04 7a fe f6 04 05 05 03 00 fb 06 05 03 00 fb 07 21 00 00 00 08 19 a6 32 02 0a 12 67 3c 02 0b 00 00 00 02 00 00 00 00 00
>  type 0xb9 [0x0040]: b9 08 40 00 14 00 00 00
>  type 0xb9 [0x0041]: b9 07 41 00 15 0d 01
>  type 0xb9 [0x0042]: b9 08 42 00 16 00 02 e6
>  type 0xb9 [0x0043]: b9 08 43 00 17 06 02 00
>  type 0xb9 [0x0044]: b9 08 44 00 18 02 02 e6
>  type 0xb9 [0x0045]: b9 33 45 00 19 07 0c 05 03 00 fb 0d aa 00 d9 00 0e be 00 f1 00 0f c2 00 ff 00 10 0a 05 38 3c 11 0a 05 22 24 12 0a 05 3b 3e 13 15 a6 32 02 00 00 00 00 00
>  type 0xb9 [0x0046]: b9 08 46 00 ff 00 00 00
>  type 0xba [0x0047]: ba 0f 47 00 06 09 18 76 aa 00 00 00 06 0b ea
>  type 0xbb [0x0048]: bb 0c 48 00 01 01 11 08 09 05 08 23
>  type 0xbb [0x0049]: bb 0c 49 00 02 01 11 08 09 05 08 24
>  type 0xbb [0x004a]: bb 0c 4a 00 03 01 11 08 09 05 08 21
>  type 0xbc [0x004b]: bc 08 4b 00 38 38 31 24
>  type 0xbd [0x004c]: bd 07 4c 00 ff 6b 00
>  type 0x7f [0x004d]: 7f 04 4d 00
>  smbios: stopped at end tag
>>> bios.3: smp
>/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
>----- BIOS data 0x00400 - 0x004ff -----
>  400  f8 03 f8 02 00 00 00 00 78 03 00 00 00 00 80 9f  "........x......."
>  410  27 44 00 7e 02 28 80 20 00 00 30 00 30 00 e0 50  "'D.~.(. ..0.0..P"
>  420  00 3d 00 3d e0 48 0d 1c 00 3c e0 48 0d 1c 0d 1c  ".=.=.H...<.H...."
>  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80  "................"
>  440  21 00 ff 01 00 00 00 e0 c8 03 50 00 00 10 00 00  "!.........P....."
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  0e 0d 00 d4 03 29 30 7f 03 00 c0 00 44 c0 08 00  ".....)0.....D..."
>  470  00 00 00 00 01 01 00 00 14 14 14 00 01 01 01 01  "................"
>  480  1e 00 3e 00 18 10 00 60 09 11 08 81 50 00 00 04  "..>....`....P..."
>  490  04 00 00 00 00 00 10 12 00 00 00 00 00 00 00 00  "................"
>  4a0  00 00 00 00 00 00 00 00 da 0d 00 c0 00 00 00 00  "................"
>  4b0  00 00 00 00 00 00 5c 1b 00 00 00 00 00 00 00 00  "......\........."
>  4c0  40 03 00 01 40 06 f0 01 f6 03 e0 04 0e 10 50 04  "@...@.........P."
>  4d0  9f 0a 00 00 10 07 84 00 c8 00 00 00 00 00 00 00  "................"
>  4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>----- EBDA 0x9f800 - 0x9ffff -----
>  9f800  02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f810  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f820  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f830  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f840  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f850  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f860  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f870  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f880  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f890  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f900  00 00 00 00 ca 02 40 07 00 00 00 00 00 00 00 00  "......@........."
>  9f910  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f920  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f930  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f940  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f950  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f960  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f970  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f980  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f990  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9faa0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fab0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fac0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fad0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fae0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9faf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb40  f9 00 00 24 00 00 00 24 00 00 00 00 00 00 00 00  "...$...$........"
>  9fb50  00 02 00 00 00 0d 00 00 00 28 00 00 80 00 01 00  ".........(......"
>  9fb60  00 8d 02 00 00 02 00 80 00 00 00 00 00 00 00 00  "................"
>  9fb70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fba0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbe0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fca0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fce0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fda0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fde0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe40  01 02 00 00 00 00 dc 00 00 00 38 55 a6 49 8c 56  "..........8U.I.V"
>  9fe50  be 56 a6 49 a6 49 00 00 00 ff ff ff ff ff ff ff  ".V.I.I.........."
>  9fe60  ff ff ea 64 00 f0 ff ff ff ff ff ff ff ff ff ff  "...d............"
>  9fe70  ff ff 01 01 27 44 13 00 9f 01 dd 00 00 00 00 ff  "....'D.........."
>  9fe80  00 00 00 00 04 00 ff ff ff ff 00 04 00 ff ff ff  "................"
>  9fe90  ff ff ff ff ff ff ff ff 3f ff 70 01 76 03 a0 ff  "........?.p.v..."
>  9fea0  0f ff ff ff ff ff ff ff 10 5f 00 00 00 00 00 00  "........._......"
>  9feb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fec0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fed0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fee0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fef0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffa0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffe0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fff0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- EBDA end -----
>>> bios.4: vbe
>  klog: pci config type 1
>/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
>/dev/mem[0xc0000, 49152]: mmap(, 49152,,,, 0xc0000) ok
>vbe: BIOS chksum wrong
>/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
>  vbe: int 10h points to c000:0014: e9 81 1d 92 44 00 b0 0c
>>> bios.4.1: vbe info
>vm86: using CPU emulation
>>> bios.5: 32
>  bios32: valid SD header at 0xf7490 (size 0x10, rev 0), SD at 0xfd860
>>> sys.1: cpu
>  vmware check: 0
>>> misc.9: kernel log
>----- kernel log -----
>  <5>Linux version 2.6.13-rc5-git3-3-default (geeko@buildhost) (gcc version 4.0.2 20050802 (prerelease) (SUSE Linux)) #1 Fri Aug 5 14:06:24 UTC 2005
>  <6>BIOS-provided physical RAM map:
>  <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>  <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>  <4> BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
>  <4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
>  <4> BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
>  <4> BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
>  <4> BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
>  <4> BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
>  <4> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
>  <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>  <4> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
>  <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>  <5>0MB HIGHMEM available.
>  <5>510MB LOWMEM available.
>  <7>On node 0 totalpages: 130800
>  <7>  DMA zone: 4096 pages, LIFO batch:1
>  <7>  Normal zone: 126704 pages, LIFO batch:31
>  <7>  HighMem zone: 0 pages, LIFO batch:1
>  <6>DMI present.
>  <7>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f74f0
>  <7>ACPI: RSDT (v001 PTLTD    RSDT   0x06040001  LTP 0x00000000) @ 0x1fefbd21
>  <7>ACPI: FADT (v001 FSC    D1218/19 0x06040001      0x000f4240) @ 0x1fefbd51
>  <7>ACPI: MADT (v001 FSC    	 APIC   0x06040001  CSF 0x00000000) @ 0x1fefef7e
>  <7>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040001  LTP 0x00000001) @ 0x1fefefd8
>  <7>ACPI: DSDT (v001 FSC    D1218/19 0x06040001 MSFT 0x0100000c) @ 0x00000000
>  <6>ACPI: PM-Timer IO Port: 0xf008
>  <7>ACPI: Local APIC address 0xfee00000
>  <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>  <4>Processor #0 6:8 APIC version 17
>  <6>ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>  <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>  <4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>  <7>ACPI: IRQ0 used by override.
>  <7>ACPI: IRQ2 used by override.
>  <7>ACPI: IRQ9 used by override.
>  <4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>  <6>Using ACPI (MADT) for SMP configuration information
>  <4>Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
>  <4>Built 1 zonelists
>  <5>Kernel command line: BOOT_IMAGE=linux initrd=initrd splash=silent textmode=1 lang=de
>  <6>bootsplash: silent mode.
>  <7>mapped APIC to ffffd000 (fee00000)
>  <7>mapped IOAPIC to ffffc000 (fec00000)
>  <6>Initializing CPU#0
>  <4>PID hash table entries: 2048 (order: 11, 32768 bytes)
>  <4>Detected 993.671 MHz processor.
>  <6>Using pmtmr for high-res timesource
>  <4>Console: colour VGA+ 80x25
>  <4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>  <4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>  <6>Memory: 508352k/523200k available (2031k kernel code, 14216k reserved, 713k data, 204k init, 0k highmem)
>  <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>  <4>Calibrating delay using timer specific routine.. 1989.18 BogoMIPS (lpj=3978370)
>  <6>Security Framework v1.0.0 initialized
>  <6>SELinux:  Disabled at boot.
>  <4>Mount-cache hash table entries: 512
>  <7>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
>  <7>CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
>  <6>CPU: L1 I cache: 16K, L1 D cache: 16K
>  <6>CPU: L2 cache: 256K
>  <7>CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
>  <6>Intel machine check architecture supported.
>  <6>Intel machine check reporting enabled on CPU#0.
>  <6>mtrr: v2.0 (20020519)
>  <4>CPU: Intel Pentium III (Coppermine) stepping 06
>  <6>Enabling fast FPU save and restore... done.
>  <6>Enabling unmasked SIMD FPU exception support... done.
>  <6>Checking 'hlt' instruction... OK.
>  <6>checking if image is initramfs... it is
>  <6>Freeing initrd memory: 6324k freed
>  <6>ACPI: Looking for DSDT in initrd... not found!
>  <4> not found!
>  <4> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
>  <4>Parsing all Control Methods:..........................................................................................................
>  <4>Table [DSDT](id F004) - 411 Objects with 48 Devices 106 Methods 13 Regions
>  <4>ACPI Namespace successfully loaded at root c042e660
>  <4>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
>  <4>ENABLING IO-APIC IRQs
>  <6>..TIMER: vector=0x31 pin1=2 pin2=-1
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: PCI BIOS revision 2.10 entry at 0xfd963, last bus=1
>  <6>PCI: Using configuration type 1
>  <6>ACPI: Subsystem revision 20050408
>  <4>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
>  <4>evgpeblk-1024 [06] ev_create_gpe_block   : Found 4 Wake, Enabled 0 Runtime GPEs in this block
>  <4>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 10 to 1F [_GPE] 2 regs on int 0x9
>  <4>evgpeblk-1024 [06] ev_create_gpe_block   : Found 1 Wake, Enabled 0 Runtime GPEs in this block
>  <4>Completing Region/Field/Buffer/Package initialization:................................................................
>  <4>Initialized 11/13 Regions 6/6 Fields 35/35 Buffers 12/18 Packages (420 nodes)
>  <4>Executing all Device _STA and_INI methods:...................................................
>  <4>51 Devices found containing: 51 _STA, 2 _INI methods
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using IOAPIC for interrupt routing
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <4>PCI: Probing PCI hardware (bus 00)
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>  <7>Boot video device is 0000:00:02.0
>  <6>PCI: Transparent bridge - 0000:00:1e.0
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>  <4>ACPI: Device [ECP] status [00000008]: functional but not present; setting present
>  <4>ACPI: Device [GAME] status [00000008]: functional but not present; setting present
>  <4>ACPI: Device [MIDI] status [00000008]: functional but not present; setting present
>  <6>Linux Plug and Play Support v0.97 (c) Adam Belay
>  <6>pnp: PnP ACPI init
>  <6>pnp: PnP ACPI: found 13 devices
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>  <6>PCI: Bridge: 0000:00:1e.0
>  <6>  IO window: 3000-3fff
>  <6>  MEM window: f4100000-f41fffff
>  <6>  PREFETCH window: disabled.
>  <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>  <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>  <6>Simple Boot Flag at 0x69 set to 0x1
>  <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>  <5>apm: overridden by ACPI.
>  <6>audit: initializing netlink socket (disabled)
>  <4>audit(1123577108.128:1): initialized
>  <4>Total HugeTLB memory allocated, 0
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>isapnp: Scanning for PnP cards...
>  <6>isapnp: No Plug & Play device found
>  <6>Real Time Clock Driver v1.12
>  <6>PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered
>  <6>Floppy drive(s): fd0 is 1.44M
>  <6>FDC 0 is a post-1991 82077
>  <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>  <6>loop: loaded (max 8 devices)
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: PC Speaker
>  <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 3.38
>  <6>NET: Registered protocol family 2
>  <6>input: AT Translated Set 2 keyboard on isa0060/serio0
>  <4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>  <4>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>  <4>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>  <6>TCP: Hash tables configured (established 16384 bind 16384)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <4>Using IPI Shortcut mode
>  <4>ACPI wakeup devices: 
>  <4>PCI0 AGPB PCIH USB1 USB2 AC97 MC97 KEYB PS2M COM1 COM2 
>  <6>ACPI: (supports S0 S1 S3 S4 S5)
>  <6>Freeing unused kernel memory: 204k freed
>  <6>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
>  <6>Non-volatile memory driver v1.2
>  <6>NET: Registered protocol family 17
>  <5>SCSI subsystem initialized
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>usbcore: registered new driver usbfs
>  <6>usbcore: registered new driver hub
>  <6>USB Universal Host Controller Interface driver v2.3
>  <6>ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 169
>  <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>  <6>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>  <6>uhci_hcd 0000:00:1f.2: irq 169, io base 0x00001000
>  <6>hub 1-0:1.0: USB hub found
>  <6>hub 1-0:1.0: 2 ports detected
>  <6>ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 177
>  <7>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>  <6>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
>  <6>uhci_hcd 0000:00:1f.4: irq 177, io base 0x00001800
>  <6>hub 2-0:1.0: USB hub found
>  <6>hub 2-0:1.0: 2 ports detected
>  <6>usbcore: registered new driver hiddev
>  <6>usbcore: registered new driver usbhid
>  <6>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>  <6>Initializing USB Mass Storage driver...
>  <6>usbcore: registered new driver usb-storage
>  <6>USB Mass Storage support registered.
>  <6>ACPI: CPU0 (power states: C1[C1])
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>ICH2: IDE controller at PCI slot 0000:00:1f.1
>  <6>ICH2: chipset revision 2
>  <6>ICH2: not 100% native mode: will probe irqs later
>  <6>    ide0: BM-DMA at 0x2400-0x2407, BIOS settings: hda:DMA, hdb:pio
>  <6>    ide1: BM-DMA at 0x2408-0x240f, BIOS settings: hdc:DMA, hdd:pio
>  <7>Probing IDE interface ide0...
>  <4>hda: SAMSUNG SV2042H, ATA DISK drive
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <6>hda: max request size: 128KiB
>  <6>hda: 39865392 sectors (20411 MB) w/426KiB Cache, CHS=39549/16/63, UDMA(100)
>  <6>hda: cache flushes not supported
>  <6> hda: unknown partition table
>  <7>Probing IDE interface ide1...
>  <4>hdc: FX4830T, ATAPI CD/DVD-ROM drive
>  <4>ide1 at 0x170-0x177,0x376 on irq 15
>  <6>hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <7>ISO 9660 Extensions: Microsoft Joliet Level 3
>  <7>ISO 9660 Extensions: RRIP_1991A
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>st: Version 20050501, fixed bufsize 32768, s/g segs 256
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/modprobe parport " -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc io=0x378 irq=none,none,none" -----
>----- return code: ? -----
>>> misc.1.3: read floppy
>  read_block0: 512 bytes (5s, 0us)
>floppy ioctl(geo) ok
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  0170-0177 : ide1
>  01f0-01f7 : ide0
>  02f8-02ff : serial
>  0376-0376 : ide1
>  0378-037a : parport0
>  037b-037f : parport0
>  03c0-03df : vga+
>  03f2-03f5 : floppy
>  03f6-03f6 : ide0
>  03f7-03f7 : floppy DIR
>  03f8-03ff : serial
>  0cf8-0cff : PCI conf1
>  1000-101f : 0000:00:1f.2
>    1000-101f : uhci_hcd
>  1400-140f : 0000:00:1f.3
>  1800-181f : 0000:00:1f.4
>    1800-181f : uhci_hcd
>  1c00-1c3f : 0000:00:1f.5
>  2000-20ff : 0000:00:1f.5
>  2400-240f : 0000:00:1f.1
>    2400-2407 : ide0
>    2408-240f : ide1
>  3000-3fff : PCI Bus #01
>    3000-303f : 0000:01:08.0
>  f000-f07f : 0000:00:1f.0
>    f000-f07f : motherboard
>      f000-f003 : PM1a_EVT_BLK
>      f004-f005 : PM1a_CNT_BLK
>      f008-f00b : PM_TMR
>      f010-f015 : ACPI CPU throttle
>      f028-f02b : GPE0_BLK
>      f02c-f02f : GPE1_BLK
>  f100-f10f : motherboard
>  f180-f1bf : 0000:00:1f.0
>    f180-f1bf : motherboard
>  f820-f82f : motherboard
>  fe00-fe00 : motherboard
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    0:      26593    IO-APIC-edge  timer
>    1:        142    IO-APIC-edge  i8042
>    3:         22    IO-APIC-edge  serial
>    4:         24    IO-APIC-edge  serial
>    6:         21    IO-APIC-edge  floppy
>    8:          0    IO-APIC-edge  rtc
>    9:          0   IO-APIC-level  acpi
>   12:        128    IO-APIC-edge  i8042
>   14:         73    IO-APIC-edge  ide0
>   15:        801    IO-APIC-edge  ide1
>  169:          0   IO-APIC-level  uhci_hcd:usb1
>  177:          0   IO-APIC-level  uhci_hcd:usb2
>  NMI:          0 
>  LOC:      26094 
>  ERR:          0
>  MIS:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   2: floppy
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 6
>  model		: 8
>  model name	: Pentium III (Coppermine)
>  stepping	: 6
>  cpu MHz		: 993.671
>  cache size	: 256 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 2
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
>  bogomips	: 1989.18
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x1fef0000
>  klog mem 0: 0x1f070000
>  klog mem 1: 0x0
>  klog mem:   0x1f070000
> -- <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> -- <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> -- <4> BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
> -- <4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> -- <4> BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
> -- <4> BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
> -- <4> BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
> -- <4> BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
> -- <4> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
> -- <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> -- <4> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> -- <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> -- <5>0MB HIGHMEM available.
>  bios mem:   0x1fe8f800
>  meminfo:    0x1f70e000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0xb1204470b94387a4) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>        ide-disk: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>        PIIX_IDE: /devices/pci0000:00/0000:00:1f.1
>        uhci_hcd: /devices/pci0000:00/0000:00:1f.2
>        uhci_hcd: /devices/pci0000:00/0000:00:1f.4
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>       i8042 aux: /devices/pnp0/00:08
>       i8042 kbd: /devices/pnp0/00:07
>          serial: /devices/pnp0/00:0b
>          serial: /devices/pnp0/00:0c
>          system: /devices/pnp0/00:01
>           atkbd: /devices/platform/i8042/serio1
>         psmouse: /devices/platform/i8042/serio0
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:1f.2/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:1f.4/usb2/2-0:1.0
>             hub: /module/usbcore
>     usb-storage: /module/usb_storage
>           usbfs: /module/usbcore
>          usbhid: /module/usbhid
>             usb: /devices/pci0000:00/0000:00:1f.2/usb1
>             usb: /devices/pci0000:00/0000:00:1f.4/usb2
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    class = 0x60000
>    vendor = 0x8086
>    device = 0x1130
>    subvendor = 0x110a
>    subdevice = 0x5a
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:02.0, bus_id = 0000:00:02.0, bus = pci
>    path = /devices/pci0000:00/0000:00:02.0
>    class = 0x30000
>    vendor = 0x8086
>    device = 0x1132
>    subvendor = 0x110a
>    subdevice = 0x4c
>    irq = 10
>    res[0] = 0xf8000000 0xfbffffff 0x1208
>    res[1] = 0xf4000000 0xf407ffff 0x200
>    config[64]
>  pci device: name = 0000:00:1e.0, bus_id = 0000:00:1e.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x244e
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.0, bus_id = 0000:00:1f.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.0
>    class = 0x60100
>    vendor = 0x8086
>    device = 0x2440
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.1, bus_id = 0000:00:1f.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.1
>    class = 0x10180
>    vendor = 0x8086
>    device = 0x244b
>    subvendor = 0x110a
>    subdevice = 0x55
>    irq = 0
>    res[4] = 0x2400 0x240f 0x101
>    config[64]
>  pci device: name = 0000:00:1f.2, bus_id = 0000:00:1f.2, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.2
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x2442
>    subvendor = 0x110a
>    subdevice = 0x55
>    irq = 169
>    res[4] = 0x1000 0x101f 0x101
>    config[64]
>  pci device: name = 0000:00:1f.3, bus_id = 0000:00:1f.3, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.3
>    class = 0xc0500
>    vendor = 0x8086
>    device = 0x2443
>    subvendor = 0x110a
>    subdevice = 0x55
>    irq = 5
>    res[4] = 0x1400 0x140f 0x101
>    config[64]
>  pci device: name = 0000:00:1f.4, bus_id = 0000:00:1f.4, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.4
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x2444
>    subvendor = 0x110a
>    subdevice = 0x55
>    irq = 177
>    res[4] = 0x1800 0x181f 0x101
>    config[64]
>  pci device: name = 0000:00:1f.5, bus_id = 0000:00:1f.5, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.5
>    class = 0x40100
>    vendor = 0x8086
>    device = 0x2445
>    subvendor = 0x110a
>    subdevice = 0x56
>    irq = 5
>    res[0] = 0x2000 0x20ff 0x101
>    res[1] = 0x1c00 0x1c3f 0x101
>    config[64]
>  pci device: name = 0000:01:08.0, bus_id = 0000:01:08.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:01:08.0
>    class = 0x20000
>    vendor = 0x8086
>    device = 0x2449
>    subvendor = 0x8086
>    subdevice = 0x3014
>    irq = 9
>    res[0] = 0xf4100000 0xf4100fff 0x200
>    res[1] = 0x3000 0x303f 0x101
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:1130:110a:005a:02
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 86 80 30 11 06 00 90 20 02 00 00 06 00 00 00 00  "..0.... ........"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 0a 11 5a 00  "..............Z."
>  30: 00 00 00 00 88 00 00 00 00 00 00 00 00 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 09 00  ".........."
>
>bus 00, slot 02, func 0, vend:dev:s_vend:s_dev:rev 8086:1132:110a:004c:02
>class 03, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 10
>  addr0 f8000000, size 04000000
>  addr1 f4000000, size 00080000
>  00: 86 80 32 11 07 00 b0 02 02 00 00 03 00 00 00 00  "..2............."
>  10: 08 00 00 f8 00 00 00 f4 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 0a 11 4c 00  "..............L."
>  30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00  ".............."
>
>bus 00->01, slot 1e, func 0, vend:dev:s_vend:s_dev:rev 8086:244e:0000:0000:02
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 86 80 4e 24 07 01 80 00 02 00 04 06 00 00 01 00  "..N$............"
>  10: 00 00 00 00 00 00 00 00 00 01 01 40 30 30 80 22  "...........@00.""
>  20: 10 f4 10 f4 f0 ff 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00  "................"
>
>bus 00, slot 1f, func 0, vend:dev:s_vend:s_dev:rev 8086:2440:0000:0000:02
>class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
>  00: 86 80 40 24 0f 01 80 02 02 00 01 06 00 00 80 00  "..@$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 1f, func 1, vend:dev:s_vend:s_dev:rev 8086:244b:110a:0055:02
>class 01, sub_class 01 prog_if 80, hdr 0, flags <>, irq 0
>  addr4 00002400, size 00000010
>  00: 86 80 4b 24 05 00 80 02 02 80 01 01 00 00 00 00  "..K$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 24 00 00 00 00 00 00 00 00 00 00 0a 11 55 00  ".$............U."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 1f, func 2, vend:dev:s_vend:s_dev:rev 8086:2442:110a:0055:02
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 169
>  addr4 00001000, size 00000020
>  00: 86 80 42 24 05 00 80 02 02 00 03 0c 00 00 00 00  "..B$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 10 00 00 00 00 00 00 00 00 00 00 0a 11 55 00  "..............U."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 09 04 00 00  "................"
>
>bus 00, slot 1f, func 3, vend:dev:s_vend:s_dev:rev 8086:2443:110a:0055:02
>class 0c, sub_class 05 prog_if 00, hdr 0, flags <>, irq 5
>  addr4 00001400, size 00000010
>  00: 86 80 43 24 01 00 80 02 02 00 05 0c 00 00 00 00  "..C$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 14 00 00 00 00 00 00 00 00 00 00 0a 11 55 00  "..............U."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00  "................"
>
>bus 00, slot 1f, func 4, vend:dev:s_vend:s_dev:rev 8086:2444:110a:0055:02
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 177
>  addr4 00001800, size 00000020
>  00: 86 80 44 24 05 00 80 02 02 00 03 0c 00 00 00 00  "..D$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 18 00 00 00 00 00 00 00 00 00 00 0a 11 55 00  "..............U."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00  "................"
>
>bus 00, slot 1f, func 5, vend:dev:s_vend:s_dev:rev 8086:2445:110a:0056:02
>class 04, sub_class 01 prog_if 00, hdr 0, flags <>, irq 5
>  addr0 00002000, size 00000100
>  addr1 00001c00, size 00000040
>  00: 86 80 45 24 05 00 80 02 02 00 01 04 00 00 00 00  "..E$............"
>  10: 01 20 00 00 01 1c 00 00 00 00 00 00 00 00 00 00  ". .............."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 0a 11 56 00  "..............V."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00  "................"
>
>bus 01, slot 08, func 0, vend:dev:s_vend:s_dev:rev 8086:2449:8086:3014:01
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 9
>  addr0 f4100000, size 00001000
>  addr1 00003000, size 00000040
>  00: 86 80 49 24 17 01 90 02 01 00 00 02 08 42 00 00  "..I$.........B.."
>  10: 00 00 10 f4 01 30 00 00 00 00 00 00 00 00 00 00  ".....0.........."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 14 30  "...............0"
>  30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 01 08 38  "...............8"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00  ".............."
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> monitor.1: ddc
>>> isapnp.1: pnp devices
>  pnp device: name = 00:00, bus_id = 00:00, bus = pnp
>    path = /devices/pnp0/00:00
>    id = INT 0800
>  pnp device: name = 00:01, bus_id = 00:01, bus = pnp
>    path = /devices/pnp0/00:01
>    id = PNP 0c02
>  pnp device: name = 00:02, bus_id = 00:02, bus = pnp
>    path = /devices/pnp0/00:02
>    id = PNP 0200
>  pnp device: name = 00:03, bus_id = 00:03, bus = pnp
>    path = /devices/pnp0/00:03
>    id = PNP 0b00
>  pnp device: name = 00:04, bus_id = 00:04, bus = pnp
>    path = /devices/pnp0/00:04
>    id = PNP 0c04
>  pnp device: name = 00:05, bus_id = 00:05, bus = pnp
>    path = /devices/pnp0/00:05
>    id = PNP 0800
>  pnp device: name = 00:06, bus_id = 00:06, bus = pnp
>    path = /devices/pnp0/00:06
>    id = PNP 0a05
>  pnp device: name = 00:07, bus_id = 00:07, bus = pnp
>    path = /devices/pnp0/00:07
>    id = PNP 0303
>  pnp device: name = 00:08, bus_id = 00:08, bus = pnp
>    path = /devices/pnp0/00:08
>    id = PNP 0f13
>  pnp device: name = 00:09, bus_id = 00:09, bus = pnp
>    path = /devices/pnp0/00:09
>    id = PNP 0700
>  pnp device: name = 00:0a, bus_id = 00:0a, bus = pnp
>    path = /devices/pnp0/00:0a
>    id = PNP 0400
>  pnp device: name = 00:0b, bus_id = 00:0b, bus = pnp
>    path = /devices/pnp0/00:0b
>    id = PNP 0501
>  pnp device: name = 00:0c, bus_id = 00:0c, bus = pnp
>    path = /devices/pnp0/00:0c
>    id = PNP 0501
>>> isa.1: isdn
>---------- ISA ISDN raw data ----------
>---------- ISA ISDN raw data end ----------
>>> isa.1.1: isdn
>-----  cardctl status -----
>-----  cardctl status end -----
>-----  cardctl ident -----
>-----  cardctl ident end -----
>>> serial.1: read info
>----- /proc/tty/driver/serial -----
>  0: uart:16550A port:000003F8 irq:4 tx:79 rx:0
>  1: uart:16550A port:000002F8 irq:3 tx:79 rx:0
>  2: uart:unknown port:000003E8 irq:4
>  3: uart:unknown port:000002E8 irq:3
>----- /proc/tty/driver/serial end -----
>----- serial info -----
>  uart 16550A, line 0, port 0x3f8, irq 4, baud 0
>  uart 16550A, line 1, port 0x2f8, irq 3, baud 0
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x0170 - 0x0177 (0x08) "ide1"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:1 0x02f8 - 0x02ff (0x08) "serial"
>i/o:1 0x0376 - 0x0376 (0x01) "ide1"
>i/o:1 0x0378 - 0x037a (0x03) "parport0"
>i/o:1 0x037b - 0x037f (0x05) "parport0"
>i/o:1 0x03c0 - 0x03df (0x20) "vga+"
>i/o:1 0x03f2 - 0x03f5 (0x04) "floppy"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:1 0x03f7 - 0x03f7 (0x01) "floppy DIR"
>i/o:1 0x03f8 - 0x03ff (0x08) "serial"
>i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
>i/o:0 0x1000 - 0x101f (0x20) "0000:00:1f.2"
>i/o:0 0x1000 - 0x101f (0x20) "uhci_hcd"
>i/o:0 0x1400 - 0x140f (0x10) "0000:00:1f.3"
>i/o:0 0x1800 - 0x181f (0x20) "0000:00:1f.4"
>i/o:0 0x1800 - 0x181f (0x20) "uhci_hcd"
>i/o:0 0x1c00 - 0x1c3f (0x40) "0000:00:1f.5"
>i/o:0 0x2000 - 0x20ff (0x100) "0000:00:1f.5"
>i/o:0 0x2400 - 0x240f (0x10) "0000:00:1f.1"
>i/o:1 0x2400 - 0x2407 (0x08) "ide0"
>i/o:1 0x2408 - 0x240f (0x08) "ide1"
>i/o:0 0x3000 - 0x3fff (0x1000) "PCI Bus #01"
>i/o:0 0x3000 - 0x303f (0x40) "0000:01:08.0"
>i/o:0 0xf000 - 0xf07f (0x80) "0000:00:1f.0"
>i/o:0 0xf000 - 0xf07f (0x80) "motherboard"
>i/o:0 0xf000 - 0xf003 (0x04) "PM1a_EVT_BLK"
>i/o:0 0xf004 - 0xf005 (0x02) "PM1a_CNT_BLK"
>i/o:0 0xf008 - 0xf00b (0x04) "PM_TMR"
>i/o:0 0xf010 - 0xf015 (0x06) "ACPI CPU throttle"
>i/o:0 0xf028 - 0xf02b (0x04) "GPE0_BLK"
>i/o:0 0xf02c - 0xf02f (0x04) "GPE1_BLK"
>i/o:0 0xf100 - 0xf10f (0x10) "motherboard"
>i/o:0 0xf180 - 0xf1bf (0x40) "0000:00:1f.0"
>i/o:0 0xf180 - 0xf1bf (0x40) "motherboard"
>i/o:0 0xf820 - 0xf82f (0x10) "motherboard"
>i/o:0 0xfe00 - 0xfe00 (0x01) "motherboard"
>irq:1  0 (    26593) "timer"
>irq:0  1 (      142) "i8042"
>irq:1  3 (       22) "serial"
>irq:1  4 (       24) "serial"
>irq:1  6 (       21) "floppy"
>irq:1  8 (        0) "rtc"
>irq:0  9 (        0) "acpi"
>irq:0 12 (      128) "i8042"
>irq:1 14 (       73) "ide0"
>irq:1 15 (      801) "ide1"
>irq:0 169 (        0) "uhci_hcd:usb1"
>irq:0 177 (        0) "uhci_hcd:usb2"
>dma:1 2 "floppy"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc" -----
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>/proc/sys/dev/parport/parport0/base-addr
>  888	0
>/proc/sys/dev/parport/parport0/autoprobe
>----- parallel info end -----
>>> parallel.5: ppa mod
>----- exec: "/sbin/modprobe ppa " -----
>----- return code: ? -----
>>> parallel.6: zip read info
>----- exec: "/sbin/rmmod ppa" -----
>----- return code: ? -----
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>>> block.2: sysfs drivers
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:		hdc
>drive speed:		48
>drive # of slots:	1
>Can close tray:		1
>Can open tray:		1
>Can lock tray:		1
>Can change speed:	1
>Can select disk:	0
>Can read multisession:	1
>Can read MCN:		1
>Reports media changed:	1
>Can play audio:		1
>Can write CD-R:		0
>Can write CD-RW:	0
>Can read DVD:		0
>Can write DVD-R:	0
>Can write DVD-RAM:	0
>Can read MRW:		1
>Can write MRW:		1
>Can write RAM:		1
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     7     0      64068 loop0
>     3     0   19932696 hda
>----- /proc/partitions end -----
>disks:
>  hda
>partitions:
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  ide: bus_id = 1.0 path = /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>  block: name = fd0, path = /block/fd0
>    dev = 2:0
>    range = 1
>    block device: bus = platform, bus_id = floppy.0 driver = unknown
>      path = /devices/platform/floppy.0
>  block: name = hda, path = /block/hda
>    dev = 3:0
>    range = 64
>    block device: bus = ide, bus_id = 0.0 driver = ide-disk
>      path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>>> block.5: /dev/hda
>>> block.5.1: /dev/hda geo
>  dev = /dev/hda, fd = 4
>  open ok, fd = 4
>/dev/hda: ioctl(geo) ok
>/dev/hda: ioctl(block size) ok
>/dev/hda: ioctl(disk size) ok
>  block: name = hdc, path = /block/hdc
>    dev = 22:0
>    range = 1
>    block device: bus = ide, bus_id = 1.0 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>  hdc: el torito boot catalog at 0x00dc
>    media type: 0
>    load address: 0x0000
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>>> scsi.1: scsi modules
>>> scsi.2: scsi tape
>>> scsi.3: scsi generic
>>> usb.1: sysfs drivers
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:1f.2/usb1
>  usb dev: /devices/pci0000:00/0000:00:1f.4/usb2
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1f.2/usb1/1-0:1.0
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:1f.2/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-rc5-git3-3-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1f.2"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1f.4/usb2/2-0:1.0
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:1f.4/usb2
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-rc5-git3-3-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1f.4"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:1f.2/usb1
>  usb device: name = usb2, bus_id = usb2, bus = usb
>    path = /devices/pci0000:00/0000:00:1f.4/usb2
>>> usb.3.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>  FATAL: Module joydev not found.
>----- return code: ? -----
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/event0
>    dev = 13:64
>  input: name = event1, path = /class/input/event1
>    dev = 13:65
>    input device: bus = serio, bus_id = serio1 driver = atkbd
>      path = /devices/platform/i8042/serio1
>  input: name = event2, path = /class/input/event2
>    dev = 13:66
>    input device: bus = serio, bus_id = serio0 driver = psmouse
>      path = /devices/platform/i8042/serio0
>  input: name = mice, path = /class/input/mice
>    dev = 13:63
>  input: name = mouse0, path = /class/input/mouse0
>    dev = 13:32
>    input device: bus = serio, bus_id = serio0 driver = psmouse
>      path = /devices/platform/i8042/serio0
>>> usb.3.4: lp
>>> usb.3.5: serial
>>> edd.1: edd mod
>----- exec: "/sbin/modprobe edd " -----
>----- return code: ? -----
>>> edd.2: edd info
>edd: 0x80
>  size: 39865392
>  chs default: 39549/16/63
>  chs legacy: 1023/255/63
>  caps: fixed edd 
>  attached: #19 /devices/pci0000:00/0000:00:1f.1
>>> braille.1.1: alva
>>> braille.2.1: alva open
>>> braille.3.1: alva init ok
>>> braille.4.1: alva read data
>alva.100@/dev/ttyS0[0]: 
>>> braille.5.1: alva read done
>>> braille.1.1: fhp_old
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: fhp_el
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: ht
>>> braille.2.1: ht open
>>> braille.3.1: ht init ok
>>> braille.4.1: ht write ok
>>> braille.5.1: ht read done
>ht@/dev/ttyS0[1]: 00  "."
>no ht display: 0x00
>>> braille.1.1: baum
>>> braille.2.1: baum open
>>> braille.3.1: baum write ok
>>> braille.4.1: baum read done
>baum@/dev/ttyS0[0]: 
>>> braille.1.2: alva
>>> braille.2.2: alva open
>>> braille.3.2: alva init ok
>>> braille.4.2: alva read data
>alva.100@/dev/ttyS1[0]: 
>>> braille.5.2: alva read done
>>> braille.1.2: fhp_old
>>> braille.2.2: fhp open
>>> braille.3.2: fhp init ok
>>> braille.4.2: fhp write ok
>>> braille.5.2: fhp read done
>fhp@/dev/ttyS1[0]: 
>no fhp display: 0x00
>>> braille.1.2: fhp_el
>>> braille.2.2: fhp open
>>> braille.3.2: fhp init ok
>>> braille.4.2: fhp write ok
>>> braille.5.2: fhp read done
>fhp@/dev/ttyS1[0]: 
>no fhp display: 0x00
>>> braille.1.2: ht
>>> braille.2.2: ht open
>>> braille.3.2: ht init ok
>>> braille.4.2: ht write ok
>>> braille.5.2: ht read done
>ht@/dev/ttyS1[1]: 00  "."
>no ht display: 0x00
>>> braille.1.2: baum
>>> braille.2.2: baum open
>>> braille.3.2: baum write ok
>>> braille.4.2: baum read done
>baum@/dev/ttyS1[0]: 
>>> modem.1: serial
>******  started child process 2675 (15s/120s)  ******
>>> modem.2: init
>>> modem.3.1: at test
>>> modem.3.2: at test
>>> modem.3.3: at test
>>> modem.3.4: at test
>>> modem.4: init string
>>> modem.5: speed
>>> modem.5: pnp id
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>
>/dev/ttyS1
>  not a modem
>----- serial modems end -----
>******  stopped child process 2675 (121s)  ******
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>
>/dev/ttyS1
>  not a modem
>----- serial modems end -----
>>> mouse.2: serial
>******  started child process 2676 (20s/20s)  ******
>----- serial mice -----
>/dev/ttyS0
>
>/dev/ttyS1
>----- serial mice end -----
>******  stopped child process 2676 (18s)  ******
>----- serial mice -----
>/dev/ttyS0
>
>/dev/ttyS1
>----- serial mice end -----
>>> input.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>  FATAL: Module joydev not found.
>----- return code: ? -----
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  H: Handlers=kbd event0 
>  B: EV=40001 
>  B: SND=6 
>  
>  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
>  N: Name="AT Translated Set 2 keyboard"
>  P: Phys=isa0060/serio0/input0
>  H: Handlers=kbd event1 
>  B: EV=120013 
>  B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe 
>  B: MSC=10 
>  B: LED=7 
>  
>  I: Bus=0011 Vendor=0002 Product=0005 Version=0050
>  N: Name="ImPS/2 Logitech Wheel Mouse"
>  P: Phys=isa0060/serio1/input0
>  H: Handlers=mouse0 event2 
>  B: EV=7 
>  B: KEY=f0000 0 0 0 0 0 0 0 0 
>  B: REL=103 
>  
>----- /proc/bus/input/devices end -----
>bus = 16, name = PC Speaker
>  handlers = kbd event0
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = AT Translated Set 2 keyboard
>  handlers = kbd event1
>  key = 000000040200000003802078f840d001f2ffffdfffeffffffffffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = ImPS/2 Logitech Wheel Mouse
>  handlers = mouse0 event2
>  key = 000f00000000000000000000000000000000000000000000000000000000000000000000
>  rel = 00000103
>  mouse buttons = 4
>  mouse wheels = 1
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 6
>  model		: 8
>  model name	: Pentium III (Coppermine)
>  stepping	: 6
>  cpu MHz		: 993.671
>  cache size	: 256 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 2
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
>  bogomips	: 1989.18
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>/dev/console: major 4, minor 2
>>> fb.1: read info
>>> net.1: get network data
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  lo: ethtool link state: 1
>>> pppoe.1: looking for pppoe
>>> 38.1: detecting wlan features
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4.1: /dev/hda
>  read_block0: 512 bytes (5s, 0us)
>>> int.4: floppy
>>> int.5: bios
>>> int.6: mouse
>>> int.15: system info
>  system type:
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P:/block/hda
>  N:hda
>  S:disk/by-id/ata-SAMSUNG_SV2042H_0273J1FR137401
>  S:disk/by-path/pci-0000:00:1f.1-ide-0:0
>  M:3:0
>  E:ID_TYPE=disk
>  E:ID_MODEL=SAMSUNG_SV2042H
>  E:ID_SERIAL=0273J1FR137401
>  E:ID_REVISION=PK100-12
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:1f.1-ide-0:0
>  P:/class/input/event0
>  N:input/event0
>  M:13:64
>  P:/class/input/event1
>  N:input/event1
>  M:13:65
>  P:/class/input/event2
>  N:input/event2
>  M:13:66
>  P:/class/input/mice
>  N:input/mice
>  M:13:63
>  P:/class/input/mouse0
>  N:input/mouse0
>  M:13:32
>-----  udevinfo end -----
>/block/hda
>  name: hda
>  links: disk/by-id/ata-SAMSUNG_SV2042H_0273J1FR137401, disk/by-path/pci-0000:00:1f.1-ide-0:0
>/class/input/event0
>  name: input/event0
>/class/input/event1
>  name: input/event1
>/class/input/event2
>  name: input/event2
>/class/input/mice
>  name: input/mice
>/class/input/mouse0
>  name: input/mouse0
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>----- /proc/modules -----
>  edd 9824 0 - Live 0xe0888000
>  parport_pc 38980 0 - Live 0xe095d000
>  parport 33864 1 parport_pc, Live 0xe0953000
>  st 38944 0 - Live 0xe08cc000
>  piix 9988 0 [permanent], Live 0xe0804000
>  fan 6020 0 - Live 0xe0829000
>  thermal 18696 0 - Live 0xe086a000
>  processor 32060 1 thermal, Live 0xe0929000
>  usb_storage 69440 0 - Live 0xe0941000
>  usbhid 43616 0 - Live 0xe08e0000
>  uhci_hcd 32016 0 - Live 0xe08d7000
>  usbcore 111228 4 usb_storage,usbhid,uhci_hcd, Live 0xe090c000
>  ide_disk 17152 0 - Live 0xe0882000
>  ide_cd 39684 0 - Live 0xe0898000
>  ide_core 122344 4 piix,usb_storage,ide_disk,ide_cd, Live 0xe08ed000
>  sg 35744 0 - Live 0xe088e000
>  sr_mod 16420 0 - Live 0xe0870000
>  sd_mod 18576 0 - Live 0xe083d000
>  scsi_mod 130536 5 st,usb_storage,sg,sr_mod,sd_mod, Live 0xe08ab000
>  cdrom 36896 2 ide_cd,sr_mod, Live 0xe0877000
>  cramfs 42356 1 - Live 0xe0851000
>  vfat 12800 0 - Live 0xe0838000
>  fat 49564 1 vfat, Live 0xe0843000
>  nls_iso8859_1 4096 0 - Live 0xe0827000
>  nls_cp437 5760 0 - Live 0xe0824000
>  af_packet 21384 0 - Live 0xe082c000
>  nvram 8328 0 - Live 0xe0820000
>----- /proc/modules end -----
>  used irqs: 0,1,3,4,5,6,8,9,10,12,14,15,41,49
>=========== end debug info ============
>01: None 00.0: 0102 Floppy disk controller
>  [Created at floppy.111]
>  Unique ID: rdCR.3wRL2_g4d2B
>  Hardware Class: storage
>  Model: "Floppy disk controller"
>  I/O Ports: 0x3f2-0x3f5 (rw)
>  DMA: 2
>  IRQ: 6 (21 events)
>  I/O Port: 0x3f7 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>02: Floppy 00.0: 10603 Floppy Disk
>  [Created at floppy.119]
>  Unique ID: sPPV.oZ89vuho4Y3
>  Parent ID: rdCR.3wRL2_g4d2B
>  Hardware Class: floppy
>  Model: "Floppy Disk"
>  Device File: /dev/fd0
>  Size: 3.5 ''
>  Size: 2880 sectors a 512 bytes
>  Geometry (Logical): CHS 80/2/18
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #1 (Floppy disk controller)
>
>03: None 00.0: 10105 BIOS
>  [Created at bios.154]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: on
>    Caps Lock: off
>  Serial Port 0: 0x3f8
>  Serial Port 1: 0x2f8
>  Parallel Port 0: 0x378
>  Base Memory: 638 kB
>  PnP BIOS: @@@0000
>  BIOS: extended read supported
>  BIOS32 Service Directory Entry: 0xfd860
>  SMBIOS Version: 2.31
>  BIOS Info: #0
>    Vendor: "FUJITSU SIEMENS // Phoenix Technologies Ltd."
>    Version: "4.06  Rev. 1.16.1219"
>    Date: "07/19/2002"
>    Start Address: 0xe3270
>    ROM Size: 512 kB
>    Features: 0x0133000000007ff1de80
>      PCI supported
>      PnP supported
>      APM supported
>      BIOS flashable
>      BIOS shadowing allowed
>      ESCD supported
>      CD boot supported
>      Selectable boot supported
>      1.2MB NEC 9800 Japanese Floppy supported
>      1.2MB Toshiba Japanese Floppy supported
>      360kB Floppy supported
>      1.2MB Floppy supported
>      720kB Floppy supported
>      2.88MB Floppy supported
>      Print Screen supported
>      8042 Keyboard Services supported
>      Serial Services supported
>      Printer Services supported
>      CGA/Mono Video supported
>      ACPI supported
>      USB Legacy supported
>      LS-120 boot supported
>      ATAPI ZIP boot supported
>      BIOS Boot Spec supported
>  System Info: #1
>    Manufacturer: "FUJITSU SIEMENS"
>    Product: "SCENIC L"
>    Serial: "YBSX019351"
>    UUID: undefined, but settable
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #2
>    Manufacturer: "FUJITSU SIEMENS"
>    Product: "D1219"
>    Version: "S26361-D1219"
>  Chassis Info: #3
>    Manufacturer: "FUJITSU SIEMENS"
>    Version: "SCEL"
>    Serial: "YBSX019351"
>    Type: 0x06 (Mini Tower)
>    Lock: present
>    Bootup State: 0x03 (Safe)
>    Power Supply State: 0x03 (Safe)
>    Thermal State: 0x03 (Safe)
>    Security Status: 0x03 (None)
>  Processor Info: #4
>    Socket: "CPU"
>    Socket Type: 0x04 (ZIF Socket)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0x11 (Pentium III)
>    Manufacturer: "Intel"
>    Version: "Pentium(R) III"
>    Processor ID: 0x0383fbff00000686
>    Status: 0x01 (Enabled)
>    Voltage: 3.3 V
>    External Clock: 133 MHz
>    Max. Speed: 1400 MHz
>    Current Speed: 1000 MHz
>    L1 Cache: #9
>    L2 Cache: #10
>  Type 5 Record: #5
>    Data 00: 05 16 05 00 03 04 03 03 09 01 00 00 05 02 03 06
>    Data 10: 00 07 00 08 00 04
>  Type 6 Record: #6
>    Data 00: 06 0c 06 00 01 01 00 00 05 88 88 00
>    String 1: "DIMM-1"
>  Type 6 Record: #7
>    Data 00: 06 0c 07 00 01 23 00 00 05 88 88 00
>    String 1: "DIMM-2"
>  Type 6 Record: #8
>    Data 00: 06 0c 08 00 01 45 00 00 05 7f 7f 00
>    String 1: "DIMM-3"
>  Cache Info: #9
>    Designation: "L1 Cache"
>    Level: L1
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x05 (Unified)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 32 kB
>    Current Size: 32 kB
>    Supported SRAM Types: 0x0028 (Burst, Synchronous)
>    Current SRAM Type: 0x0028 (Burst, Synchronous)
>  Cache Info: #10
>    Designation: "L2 Cache"
>    Level: L2
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x05 (Unified)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 256 kB
>    Current Size: 256 kB
>    Supported SRAM Types: 0x0078 (Burst, Pipeline Burst, Synchronous, Asynchronous)
>    Current SRAM Type: 0x0008 (Burst)
>  Port Connector: #11
>    Type: 0x0e (Mouse Port)
>    Internal Designator: "SMsC"
>    External Designator: "PS/2 Mouse"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #12
>    Type: 0x0d (Keyboard Port)
>    Internal Designator: "SMsC"
>    External Designator: "Keyboard"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #13
>    Type: 0x05 (Parallel Port ECP/EPP)
>    Internal Designator: "SMsC"
>    External Designator: "Parallel"
>    External Connector: 0x05 (DB-25 pin female)
>  Port Connector: #14
>    Type: 0x08 (Serial Port 16550 Compatible)
>    Internal Designator: "SMsC"
>    External Designator: "Serial-1"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #15
>    Type: 0x08 (Serial Port 16550 Compatible)
>    Internal Designator: "SMsC"
>    External Designator: "Serial-2"
>  Port Connector: #16
>    Internal Designator: "SMsC"
>    External Designator: "Floppy"
>  Port Connector: #17
>    Internal Designator: "ICH2"
>    External Designator: "Primary IDE"
>  Port Connector: #18
>    Internal Designator: "ICH2"
>    External Designator: "Secondary IDE"
>  Port Connector: #19
>    Type: 0x10 (USB)
>    Internal Designator: "ICH2"
>    External Designator: "USB-1"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #20
>    Type: 0x10 (USB)
>    Internal Designator: "ICH2"
>    External Designator: "USB-2"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #21
>    Type: 0x10 (USB)
>    Internal Designator: "ICH2"
>    External Designator: "USB-3"
>  Port Connector: #22
>    Type: 0x10 (USB)
>    Internal Designator: "ICH2"
>    External Designator: "USB-4"
>  Port Connector: #23
>    Type: 0x1c (Video Port)
>    Internal Designator: "Intel 815"
>    External Designator: "Video"
>    External Connector: 0x07 (DB-15 pin female)
>  System Slot: #24
>    Designation: "AGP"
>    Type: 0x11 (AGP 4X)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 1
>    Characteristics: 0x0104 (3.3 V, PME#)
>  System Slot: #25
>    Designation: "PCI-1"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 2
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #26
>    Designation: "PCI-2"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 3
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #27
>    Designation: "PCI-3"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 4
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #28
>    Designation: "PCI-4"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 5
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #29
>    Designation: "PCI-5"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 6
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  Inactive Record: #30
>    Data 00: 7e 0d 1e 00 01 01 01 03 04 01 00 06 01
>    String 1: "CNR"
>  System Slot: #31
>    Designation: "ISA-1"
>    Type: 0x03 (ISA)
>    Bus Width: 0x04 (16 bit)
>    Status: 0x02 (Unknown)
>    Length: 0x04 (Long)
>    Slot ID: 1
>    Characteristics: 0x0002 (5.0 V)
>  On Board Devices: #32
>    Other: "SMsC SuperI/O" (disabled)
>    Video: "Intel 815" (disabled)
>  OEM Strings: #33
>    FUJITSU SIEMENS
>    FUJITSU SIEMENS SYSTEM
>  System Config Options (Jumpers & Switches) #34:
>    DIP1 ON: Reserved
>    DIP2 ON: Recovery BIOS active
>    DIP3 ON: Floppy Disk write protected
>    DIP4 ON: Reserved
>  Physical Memory Array: #35
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 3
>    Max. Size: 512 MB
>    ECC: 0x03 (None)
>  Memory Device: #36
>    Location: "DIMM-1"
>    Memory Array: #35
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 256 MB
>    Speed: 133 MHz
>  Memory Device: #37
>    Location: "DIMM-2"
>    Memory Array: #35
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 256 MB
>    Speed: 133 MHz
>  Memory Device: #38
>    Location: "DIMM-3"
>    Memory Array: #35
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 0 bits
>    Size: No Memory Installed
>    Speed: 133 MHz
>  Memory Array Mapping: #39
>    Memory Array: #35
>    Partition Width: 1
>    Start Address: 0x00000000
>    End Address: 0x20000400
>  Memory Device Mapping: #40
>    Memory Device: #36
>    Array Mapping: #39
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0x10000000
>  Memory Device Mapping: #41
>    Memory Device: #37
>    Array Mapping: #39
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x10000000
>    End Address: 0x20000000
>  Memory Device Mapping: #42
>    Memory Device: #38
>    Array Mapping: #39
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x20000000
>    End Address: 0x20000400
>  Type 32 Record: #43
>    Data 00: 20 0b 2b 00 00 00 00 00 00 00 00
>  Type 128 Record: #44
>    Data 00: 80 0c 2c 00 01 01 02 01 00 01 40 02
>    String 1: "Alert on LAN"
>    String 2: "FSC_BASIC_AOL_02"
>  Type 176 Record: #45
>    Data 00: b0 10 2d 00 00 00 19 12 00 00 01 00 00 0e ff ff
>  Type 177 Record: #46
>    Data 00: b1 0c 2e 00 11 02 16 61 00 00 00 00
>  Type 179 Record: #47
>    Data 00: b3 06 2f 00 ff 1f
>  Type 180 Record: #48
>    Data 00: b4 0a 30 00 e3 01 f4 40 00 00
>  Type 185 Record: #49
>    Data 00: b9 0a 31 00 00 01 00 04 00 00
>  Type 185 Record: #50
>    Data 00: b9 0a 32 00 01 01 00 01 00 00
>  Type 185 Record: #51
>    Data 00: b9 08 33 00 02 09 00 00
>  Type 185 Record: #52
>    Data 00: b9 08 34 00 03 02 02 e6
>  Type 185 Record: #53
>    Data 00: b9 08 35 00 05 02 02 e6
>  Type 185 Record: #54
>    Data 00: b9 08 36 00 06 02 02 e6
>  Type 185 Record: #55
>    Data 00: b9 08 37 00 07 02 02 e6
>  Type 185 Record: #56
>    Data 00: b9 08 38 00 0a 02 02 e6
>  Type 185 Record: #57
>    Data 00: b9 08 39 00 0b 02 02 e6
>  Type 185 Record: #58
>    Data 00: b9 08 3a 00 0c 02 02 e6
>  Type 185 Record: #59
>    Data 00: b9 08 3b 00 0d 02 02 e6
>  Type 185 Record: #60
>    Data 00: b9 0a 3c 00 0f 01 00 04 00 00
>  Type 185 Record: #61
>    Data 00: b9 08 3d 00 10 02 02 e6
>  Type 185 Record: #62
>    Data 00: b9 08 3e 00 11 02 03 a0
>  Type 185 Record: #63
>    Data 00: b9 3d 3f 00 13 07 01 14 00 00 00 02 2b 00 00 00
>    Data 10: 03 0a 00 00 00 04 7a fe f6 04 05 05 03 00 fb 06
>    Data 20: 05 03 00 fb 07 21 00 00 00 08 19 a6 32 02 0a 12
>    Data 30: 67 3c 02 0b 00 00 00 02 00 00 00 00 00
>  Type 185 Record: #64
>    Data 00: b9 08 40 00 14 00 00 00
>  Type 185 Record: #65
>    Data 00: b9 07 41 00 15 0d 01
>  Type 185 Record: #66
>    Data 00: b9 08 42 00 16 00 02 e6
>  Type 185 Record: #67
>    Data 00: b9 08 43 00 17 06 02 00
>  Type 185 Record: #68
>    Data 00: b9 08 44 00 18 02 02 e6
>  Type 185 Record: #69
>    Data 00: b9 33 45 00 19 07 0c 05 03 00 fb 0d aa 00 d9 00
>    Data 10: 0e be 00 f1 00 0f c2 00 ff 00 10 0a 05 38 3c 11
>    Data 20: 0a 05 22 24 12 0a 05 3b 3e 13 15 a6 32 02 00 00
>    Data 30: 00 00 00
>  Type 185 Record: #70
>    Data 00: b9 08 46 00 ff 00 00 00
>  Type 186 Record: #71
>    Data 00: ba 0f 47 00 06 09 18 76 aa 00 00 00 06 0b ea
>  Type 187 Record: #72
>    Data 00: bb 0c 48 00 01 01 11 08 09 05 08 23
>  Type 187 Record: #73
>    Data 00: bb 0c 49 00 02 01 11 08 09 05 08 24
>  Type 187 Record: #74
>    Data 00: bb 0c 4a 00 03 01 11 08 09 05 08 21
>  Type 188 Record: #75
>    Data 00: bc 08 4b 00 38 38 31 24
>  Type 189 Record: #76
>    Data 00: bd 07 4c 00 ff 6b 00
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 10107 System
>  [Created at sys.56]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>05: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0802 Timer (8254)
>  [Created at misc.228]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (26593 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>11: None 00.0: 0701 Parallel controller (SPP)
>  [Created at misc.260]
>  Unique ID: YMnp.ecK7NLYWZ5D
>  Hardware Class: unknown
>  Model: "Parallel controller"
>  Device File: /dev/lp0
>  I/O Ports: 0x378-0x37a (rw)
>  I/O Ports: 0x37b-0x37f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>12: None 00.0: 10400 PS/2 Controller
>  [Created at misc.302]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>14: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x1feeffff (rw)
>  Memory Size: 512 MB
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>15: PCI 00.0: 0600 Host bridge
>  [Created at pci.271]
>  Unique ID: qLht.uHA9AE7c7m5
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "Siemens Nixdorf 82815 815 Chipset Host Bridge and Memory Controller Hub"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x1130 "82815 815 Chipset Host Bridge and Memory Controller Hub"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x005a 
>  Revision: 0x02
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>16: PCI 02.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.271]
>  Unique ID: _Znp.f0AtA+O+HL3
>  SysFS ID: /devices/pci0000:00/0000:00:02.0
>  SysFS BusID: 0000:00:02.0
>  Hardware Class: graphics card
>  Model: "Siemens Nixdorf I815"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x1132 "I815"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x004c 
>  Revision: 0x02
>  Memory Range: 0xf8000000-0xfbffffff (rw,prefetchable)
>  Memory Range: 0xf4000000-0xf407ffff (rw,non-prefetchable)
>  IRQ: 10 (no events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Driver Info #0:
>    XFree86 v4 Server Module: i810
>    Color Depths: 8, 16, 24
>    Extensions: 
>    Options: 
>  Driver Info #1:
>    XFree86 v4 Server Module: i810
>    3D Support: yes
>    Color Depths: 16
>    Extensions: dri
>    Options: 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>17: PCI 1e.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.271]
>  Unique ID: 6NW+.carL4jV6EX3
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0
>  SysFS BusID: 0000:00:1e.0
>  Hardware Class: bridge
>  Model: "Intel 82801 PCI Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x244e "82801 PCI Bridge"
>  Revision: 0x02
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>18: PCI 1f.0: 0601 ISA bridge
>  [Created at pci.271]
>  Unique ID: BUZT.r8Jk3vK4lo8
>  SysFS ID: /devices/pci0000:00/0000:00:1f.0
>  SysFS BusID: 0000:00:1f.0
>  Hardware Class: bridge
>  Model: "Intel 82801BA ISA Bridge (LPC)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2440 "82801BA ISA Bridge (LPC)"
>  Revision: 0x02
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>19: PCI 1f.1: 0101 IDE interface
>  [Created at pci.271]
>  Unique ID: 3p2J.rWz_9yJnT1D
>  SysFS ID: /devices/pci0000:00/0000:00:1f.1
>  SysFS BusID: 0000:00:1f.1
>  Hardware Class: storage
>  Model: "Siemens Nixdorf 82801BA IDE U100"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x244b "82801BA IDE U100"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x0055 
>  Revision: 0x02
>  Driver: "PIIX_IDE"
>  I/O Ports: 0x2400-0x240f (rw)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  I/O Ports: 0x170-0x177 (rw)
>  I/O Port: 0x376 (rw)
>  IRQ: 14 (73 events)
>  IRQ: 15 (801 events)
>  Driver Info #0:
>    Driver Status: piix is active
>    Driver Activation Cmd: "modprobe piix"
>  Driver Info #1:
>    Driver Status: generic is not active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>20: PCI 1f.2: 0c03 USB Controller (UHCI)
>  [Created at pci.271]
>  Unique ID: w7Y8.PW40u6AFucA
>  SysFS ID: /devices/pci0000:00/0000:00:1f.2
>  SysFS BusID: 0000:00:1f.2
>  Hardware Class: usb controller
>  Model: "Siemens Nixdorf 82801BA/BAM USB (Hub #1)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2442 "82801BA/BAM USB (Hub #1)"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x0055 
>  Revision: 0x02
>  Driver: "uhci_hcd"
>  I/O Ports: 0x1000-0x101f (rw)
>  IRQ: 169 (no events)
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>21: PCI 1f.3: 0c05 SMBus
>  [Created at pci.271]
>  Unique ID: nS1_.yLvAuEI3qE9
>  SysFS ID: /devices/pci0000:00/0000:00:1f.3
>  SysFS BusID: 0000:00:1f.3
>  Hardware Class: unknown
>  Model: "Siemens Nixdorf 82801BA/BAM SMBus"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2443 "82801BA/BAM SMBus"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x0055 
>  Revision: 0x02
>  I/O Ports: 0x1400-0x140f (rw)
>  IRQ: 5 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>22: PCI 1f.4: 0c03 USB Controller (UHCI)
>  [Created at pci.271]
>  Unique ID: fnWp.RLzVrFPfxNB
>  SysFS ID: /devices/pci0000:00/0000:00:1f.4
>  SysFS BusID: 0000:00:1f.4
>  Hardware Class: usb controller
>  Model: "Siemens Nixdorf 82801BA/BAM USB (Hub #2)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2444 "82801BA/BAM USB (Hub #2)"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x0055 
>  Revision: 0x02
>  Driver: "uhci_hcd"
>  I/O Ports: 0x1800-0x181f (rw)
>  IRQ: 177 (no events)
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>23: PCI 1f.5: 0401 Multimedia audio controller
>  [Created at pci.271]
>  Unique ID: W60f.J4BynvKSPaF
>  SysFS ID: /devices/pci0000:00/0000:00:1f.5
>  SysFS BusID: 0000:00:1f.5
>  Hardware Class: sound
>  Model: "Siemens Nixdorf 82801BA/BAM AC'97 Audio"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2445 "82801BA/BAM AC'97 Audio"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x0056 
>  Revision: 0x02
>  I/O Ports: 0x2000-0x20ff (rw)
>  I/O Ports: 0x1c00-0x1c3f (rw)
>  IRQ: 5 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>24: PCI 108.0: 0200 Ethernet controller
>  [Created at pci.271]
>  Unique ID: 75Hn.a63RcsNVPF6
>  Parent ID: 6NW+.carL4jV6EX3
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:08.0
>  SysFS BusID: 0000:01:08.0
>  Hardware Class: network
>  Model: "Intel EtherExpress PRO/100 VM"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2449 "82801BA/BAM/CA/CAM Ethernet Controller"
>  SubVendor: pci 0x8086 "Intel Corporation"
>  SubDevice: pci 0x3014 "EtherExpress PRO/100 VM"
>  Revision: 0x01
>  Memory Range: 0xf4100000-0xf4100fff (rw,non-prefetchable)
>  I/O Ports: 0x3000-0x3fff (rw)
>  IRQ: 9 (no events)
>  Driver Info #0:
>    Driver Status: e100 is not active
>    Driver Activation Cmd: "modprobe e100"
>  Driver Info #1:
>    Driver Status: eepro100 is not active
>    Driver Activation Cmd: "modprobe eepro100"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #17 (PCI bridge)
>
>25: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: z9pp.jDhFyyFrbg5
>  SysFS ID: /devices/pnp0/00:00
>  SysFS BusID: 00:00
>  Hardware Class: unknown
>  Model: "Unclassified device"
>  SubVendor: INT 
>  SubDevice: eisa 0x0800 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>26: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: QL3u.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:01
>  SysFS BusID: 00:01
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>27: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: tWJy.ld94kxNGZf5
>  SysFS ID: /devices/pnp0/00:02
>  SysFS BusID: 00:02
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0200 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>28: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: KiZ0.WYwRElrJa93
>  SysFS ID: /devices/pnp0/00:03
>  SysFS BusID: 00:03
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0b00 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>29: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: ntp4.DE8RM9cWQQ8
>  SysFS ID: /devices/pnp0/00:04
>  SysFS BusID: 00:04
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c04 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>30: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: E349.bvKf3UMzZfE
>  SysFS ID: /devices/pnp0/00:05
>  SysFS BusID: 00:05
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0800 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>31: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: hEKD.SQ+K0pwodME
>  SysFS ID: /devices/pnp0/00:06
>  SysFS BusID: 00:06
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0a05 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>32: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: NhVi.xhndlW9HXJ7
>  SysFS ID: /devices/pnp0/00:07
>  SysFS BusID: 00:07
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0303 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>33: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: qslm.t7Yh1tpgb13
>  SysFS ID: /devices/pnp0/00:08
>  SysFS BusID: 00:08
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0f13 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>34: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: H20r.yhTOLOXWEq7
>  SysFS ID: /devices/pnp0/00:09
>  SysFS BusID: 00:09
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0700 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>35: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: iT2w.13ubA72AEK3
>  SysFS ID: /devices/pnp0/00:0a
>  SysFS BusID: 00:0a
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0400 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>36: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: 9fI_.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:0b
>  SysFS BusID: 00:0b
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>37: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: cqY2.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:0c
>  SysFS BusID: 00:0c
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>38: None 00.0: 0700 Serial controller (16550)
>  [Created at serial.73]
>  Unique ID: S_Uw.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS0
>  I/O Ports: 0x3f8-0x3ff (rw)
>  IRQ: 4 (24 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>39: None 00.1: 0700 Serial controller (16550)
>  [Created at serial.73]
>  Unique ID: v9l_.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS1
>  I/O Ports: 0x2f8-0x2ff (rw)
>  IRQ: 3 (22 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>40: IDE 00.0: 10600 Disk
>  [Created at block.188]
>  Unique ID: l_yX.Def54Yk_t_B
>  Parent ID: 3p2J.rWz_9yJnT1D
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  Hardware Class: disk
>  Model: "SAMSUNG SV2042H"
>  Vendor: "SAMSUNG"
>  Device: "SV2042H"
>  Revision: "PK100-12"
>  Serial ID: "0273J1FR137401"
>  Driver: "PIIX_IDE", "ide-disk", "ide-disk"
>  Device File: /dev/disk/by-id/ata-SAMSUNG_SV2042H_0273J1FR137401
>  Device Files: /dev/hda, /dev/disk/by-id/ata-SAMSUNG_SV2042H_0273J1FR137401, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0
>  Device Number: block 3:0-3:63
>  BIOS id: 0x80
>  Geometry (Logical): CHS 39549/16/63
>  Size: 39865392 sectors a 512 bytes
>  Geometry (BIOS EDD): CHS 39549/16/63
>  Size (BIOS EDD): 39865392 sectors
>  Geometry (BIOS Legacy): CHS 1023/255/63
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #19 (IDE interface)
>
>41: IDE 02.0: 10602 CD-ROM
>  [Created at block.192]
>  Unique ID: 90A1.YmLq_wS3vU2
>  Parent ID: 3p2J.rWz_9yJnT1D
>  SysFS ID: /block/hdc
>  SysFS BusID: 1.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>  Hardware Class: cdrom
>  Model: "FX4830T"
>  Device: "FX4830T"
>  Revision: "R02E"
>  Serial ID: ""
>  Driver: "PIIX_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/hdc
>  Device Number: block 22:0
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #19 (IDE interface)
>  Drive Speed: 48
>  Volume ID: "SU1000.001"
>  Application: "SuSE-Linux-CD-OSS-i386-10.0#0"
>  Publisher: "Novell, Inc."
>  Preparer: "CD-Team, http://www.suse.de/feedback"
>  Creation date: "2005080813541700"
>  El Torito info: platform 0, bootable
>    Boot Catalog: at sector 0x00dc
>    Id String: "Novell, Inc."
>    Media: none starting at sector 0x00dd
>    Load: 2048 bytes
>
>42: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  Unique ID: k4bc.DgRMbl3WQZ7
>  Parent ID: w7Y8.PW40u6AFucA
>  SysFS ID: /devices/pci0000:00/0000:00:1f.2/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-rc5-git3-3-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-rc5-git3-3-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1f.2"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #20 (USB Controller)
>
>43: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  Unique ID: pBe4.l7bWKGfxJ76
>  Parent ID: fnWp.RLzVrFPfxNB
>  SysFS ID: /devices/pci0000:00/0000:00:1f.4/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-rc5-git3-3-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-rc5-git3-3-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1f.4"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #22 (USB Controller)
>
>44: PS/2 00.0: 10800 Keyboard
>  [Created at input.120]
>  Unique ID: EXC1.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "AT Translated Set 2 keyboard"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "AT Translated Set 2 keyboard"
>  Device File: /dev/input/event1
>  Device Number: char 13:65
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>45: PS/2 00.0: 10500 PS/2 Mouse
>  [Created at input.140]
>  Unique ID: AH6Q.CjzNTUPH+qC
>  Hardware Class: mouse
>  Model: "ImPS/2 Logitech Wheel Mouse"
>  Vendor: int 0x0210 
>  Device: int 0x0014 "ImPS/2 Logitech Wheel Mouse"
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Number: char 13:63 (char 13:32)
>  Driver Info #0:
>    Buttons: 4
>    Wheels: 1
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>46: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: Intel
>  Vendor: "GenuineIntel"
>  Model: 6.8.6 "Pentium III (Coppermine)"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse
>  Clock: 993 MHz
>  Cache: 256 kb
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>47: None 00.0: 10700 Loopback
>  [Created at net.111]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>============ end hardware log ============
>01: None 00.0: 0102 Floppy disk controller
>  [Created at floppy.111]
>  Unique ID: rdCR.3wRL2_g4d2B
>  Hardware Class: storage
>  Model: "Floppy disk controller"
>  I/O Ports: 0x3f2-0x3f5 (rw)
>  DMA: 2
>  IRQ: 6 (21 events)
>  I/O Port: 0x3f7 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>02: Floppy 00.0: 10603 Floppy Disk
>  [Created at floppy.119]
>  Unique ID: sPPV.oZ89vuho4Y3
>  Parent ID: rdCR.3wRL2_g4d2B
>  Hardware Class: floppy
>  Model: "Floppy Disk"
>  Device File: /dev/fd0
>  Size: 3.5 ''
>  Size: 2880 sectors a 512 bytes
>  Geometry (Logical): CHS 80/2/18
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #1 (Floppy disk controller)
>
>03: None 00.0: 10105 BIOS
>  [Created at bios.154]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: on
>    Caps Lock: off
>  Serial Port 0: 0x3f8
>  Serial Port 1: 0x2f8
>  Parallel Port 0: 0x378
>  Base Memory: 638 kB
>  PnP BIOS: @@@0000
>  BIOS: extended read supported
>  BIOS32 Service Directory Entry: 0xfd860
>  SMBIOS Version: 2.31
>  BIOS Info: #0
>    Vendor: "FUJITSU SIEMENS // Phoenix Technologies Ltd."
>    Version: "4.06  Rev. 1.16.1219"
>    Date: "07/19/2002"
>    Start Address: 0xe3270
>    ROM Size: 512 kB
>    Features: 0x0133000000007ff1de80
>      PCI supported
>      PnP supported
>      APM supported
>      BIOS flashable
>      BIOS shadowing allowed
>      ESCD supported
>      CD boot supported
>      Selectable boot supported
>      1.2MB NEC 9800 Japanese Floppy supported
>      1.2MB Toshiba Japanese Floppy supported
>      360kB Floppy supported
>      1.2MB Floppy supported
>      720kB Floppy supported
>      2.88MB Floppy supported
>      Print Screen supported
>      8042 Keyboard Services supported
>      Serial Services supported
>      Printer Services supported
>      CGA/Mono Video supported
>      ACPI supported
>      USB Legacy supported
>      LS-120 boot supported
>      ATAPI ZIP boot supported
>      BIOS Boot Spec supported
>  System Info: #1
>    Manufacturer: "FUJITSU SIEMENS"
>    Product: "SCENIC L"
>    Serial: "YBSX019351"
>    UUID: undefined, but settable
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #2
>    Manufacturer: "FUJITSU SIEMENS"
>    Product: "D1219"
>    Version: "S26361-D1219"
>  Chassis Info: #3
>    Manufacturer: "FUJITSU SIEMENS"
>    Version: "SCEL"
>    Serial: "YBSX019351"
>    Type: 0x06 (Mini Tower)
>    Lock: present
>    Bootup State: 0x03 (Safe)
>    Power Supply State: 0x03 (Safe)
>    Thermal State: 0x03 (Safe)
>    Security Status: 0x03 (None)
>  Processor Info: #4
>    Socket: "CPU"
>    Socket Type: 0x04 (ZIF Socket)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0x11 (Pentium III)
>    Manufacturer: "Intel"
>    Version: "Pentium(R) III"
>    Processor ID: 0x0383fbff00000686
>    Status: 0x01 (Enabled)
>    Voltage: 3.3 V
>    External Clock: 133 MHz
>    Max. Speed: 1400 MHz
>    Current Speed: 1000 MHz
>    L1 Cache: #9
>    L2 Cache: #10
>  Type 5 Record: #5
>    Data 00: 05 16 05 00 03 04 03 03 09 01 00 00 05 02 03 06
>    Data 10: 00 07 00 08 00 04
>  Type 6 Record: #6
>    Data 00: 06 0c 06 00 01 01 00 00 05 88 88 00
>    String 1: "DIMM-1"
>  Type 6 Record: #7
>    Data 00: 06 0c 07 00 01 23 00 00 05 88 88 00
>    String 1: "DIMM-2"
>  Type 6 Record: #8
>    Data 00: 06 0c 08 00 01 45 00 00 05 7f 7f 00
>    String 1: "DIMM-3"
>  Cache Info: #9
>    Designation: "L1 Cache"
>    Level: L1
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x05 (Unified)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 32 kB
>    Current Size: 32 kB
>    Supported SRAM Types: 0x0028 (Burst, Synchronous)
>    Current SRAM Type: 0x0028 (Burst, Synchronous)
>  Cache Info: #10
>    Designation: "L2 Cache"
>    Level: L2
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x05 (Unified)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 256 kB
>    Current Size: 256 kB
>    Supported SRAM Types: 0x0078 (Burst, Pipeline Burst, Synchronous, Asynchronous)
>    Current SRAM Type: 0x0008 (Burst)
>  Port Connector: #11
>    Type: 0x0e (Mouse Port)
>    Internal Designator: "SMsC"
>    External Designator: "PS/2 Mouse"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #12
>    Type: 0x0d (Keyboard Port)
>    Internal Designator: "SMsC"
>    External Designator: "Keyboard"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #13
>    Type: 0x05 (Parallel Port ECP/EPP)
>    Internal Designator: "SMsC"
>    External Designator: "Parallel"
>    External Connector: 0x05 (DB-25 pin female)
>  Port Connector: #14
>    Type: 0x08 (Serial Port 16550 Compatible)
>    Internal Designator: "SMsC"
>    External Designator: "Serial-1"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #15
>    Type: 0x08 (Serial Port 16550 Compatible)
>    Internal Designator: "SMsC"
>    External Designator: "Serial-2"
>  Port Connector: #16
>    Internal Designator: "SMsC"
>    External Designator: "Floppy"
>  Port Connector: #17
>    Internal Designator: "ICH2"
>    External Designator: "Primary IDE"
>  Port Connector: #18
>    Internal Designator: "ICH2"
>    External Designator: "Secondary IDE"
>  Port Connector: #19
>    Type: 0x10 (USB)
>    Internal Designator: "ICH2"
>    External Designator: "USB-1"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #20
>    Type: 0x10 (USB)
>    Internal Designator: "ICH2"
>    External Designator: "USB-2"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #21
>    Type: 0x10 (USB)
>    Internal Designator: "ICH2"
>    External Designator: "USB-3"
>  Port Connector: #22
>    Type: 0x10 (USB)
>    Internal Designator: "ICH2"
>    External Designator: "USB-4"
>  Port Connector: #23
>    Type: 0x1c (Video Port)
>    Internal Designator: "Intel 815"
>    External Designator: "Video"
>    External Connector: 0x07 (DB-15 pin female)
>  System Slot: #24
>    Designation: "AGP"
>    Type: 0x11 (AGP 4X)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 1
>    Characteristics: 0x0104 (3.3 V, PME#)
>  System Slot: #25
>    Designation: "PCI-1"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 2
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #26
>    Designation: "PCI-2"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 3
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #27
>    Designation: "PCI-3"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 4
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #28
>    Designation: "PCI-4"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 5
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #29
>    Designation: "PCI-5"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 6
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  Inactive Record: #30
>    Data 00: 7e 0d 1e 00 01 01 01 03 04 01 00 06 01
>    String 1: "CNR"
>  System Slot: #31
>    Designation: "ISA-1"
>    Type: 0x03 (ISA)
>    Bus Width: 0x04 (16 bit)
>    Status: 0x02 (Unknown)
>    Length: 0x04 (Long)
>    Slot ID: 1
>    Characteristics: 0x0002 (5.0 V)
>  On Board Devices: #32
>    Other: "SMsC SuperI/O" (disabled)
>    Video: "Intel 815" (disabled)
>  OEM Strings: #33
>    FUJITSU SIEMENS
>    FUJITSU SIEMENS SYSTEM
>  System Config Options (Jumpers & Switches) #34:
>    DIP1 ON: Reserved
>    DIP2 ON: Recovery BIOS active
>    DIP3 ON: Floppy Disk write protected
>    DIP4 ON: Reserved
>  Physical Memory Array: #35
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 3
>    Max. Size: 512 MB
>    ECC: 0x03 (None)
>  Memory Device: #36
>    Location: "DIMM-1"
>    Memory Array: #35
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 256 MB
>    Speed: 133 MHz
>  Memory Device: #37
>    Location: "DIMM-2"
>    Memory Array: #35
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 256 MB
>    Speed: 133 MHz
>  Memory Device: #38
>    Location: "DIMM-3"
>    Memory Array: #35
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 0 bits
>    Size: No Memory Installed
>    Speed: 133 MHz
>  Memory Array Mapping: #39
>    Memory Array: #35
>    Partition Width: 1
>    Start Address: 0x00000000
>    End Address: 0x20000400
>  Memory Device Mapping: #40
>    Memory Device: #36
>    Array Mapping: #39
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0x10000000
>  Memory Device Mapping: #41
>    Memory Device: #37
>    Array Mapping: #39
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x10000000
>    End Address: 0x20000000
>  Memory Device Mapping: #42
>    Memory Device: #38
>    Array Mapping: #39
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x20000000
>    End Address: 0x20000400
>  Type 32 Record: #43
>    Data 00: 20 0b 2b 00 00 00 00 00 00 00 00
>  Type 128 Record: #44
>    Data 00: 80 0c 2c 00 01 01 02 01 00 01 40 02
>    String 1: "Alert on LAN"
>    String 2: "FSC_BASIC_AOL_02"
>  Type 176 Record: #45
>    Data 00: b0 10 2d 00 00 00 19 12 00 00 01 00 00 0e ff ff
>  Type 177 Record: #46
>    Data 00: b1 0c 2e 00 11 02 16 61 00 00 00 00
>  Type 179 Record: #47
>    Data 00: b3 06 2f 00 ff 1f
>  Type 180 Record: #48
>    Data 00: b4 0a 30 00 e3 01 f4 40 00 00
>  Type 185 Record: #49
>    Data 00: b9 0a 31 00 00 01 00 04 00 00
>  Type 185 Record: #50
>    Data 00: b9 0a 32 00 01 01 00 01 00 00
>  Type 185 Record: #51
>    Data 00: b9 08 33 00 02 09 00 00
>  Type 185 Record: #52
>    Data 00: b9 08 34 00 03 02 02 e6
>  Type 185 Record: #53
>    Data 00: b9 08 35 00 05 02 02 e6
>  Type 185 Record: #54
>    Data 00: b9 08 36 00 06 02 02 e6
>  Type 185 Record: #55
>    Data 00: b9 08 37 00 07 02 02 e6
>  Type 185 Record: #56
>    Data 00: b9 08 38 00 0a 02 02 e6
>  Type 185 Record: #57
>    Data 00: b9 08 39 00 0b 02 02 e6
>  Type 185 Record: #58
>    Data 00: b9 08 3a 00 0c 02 02 e6
>  Type 185 Record: #59
>    Data 00: b9 08 3b 00 0d 02 02 e6
>  Type 185 Record: #60
>    Data 00: b9 0a 3c 00 0f 01 00 04 00 00
>  Type 185 Record: #61
>    Data 00: b9 08 3d 00 10 02 02 e6
>  Type 185 Record: #62
>    Data 00: b9 08 3e 00 11 02 03 a0
>  Type 185 Record: #63
>    Data 00: b9 3d 3f 00 13 07 01 14 00 00 00 02 2b 00 00 00
>    Data 10: 03 0a 00 00 00 04 7a fe f6 04 05 05 03 00 fb 06
>    Data 20: 05 03 00 fb 07 21 00 00 00 08 19 a6 32 02 0a 12
>    Data 30: 67 3c 02 0b 00 00 00 02 00 00 00 00 00
>  Type 185 Record: #64
>    Data 00: b9 08 40 00 14 00 00 00
>  Type 185 Record: #65
>    Data 00: b9 07 41 00 15 0d 01
>  Type 185 Record: #66
>    Data 00: b9 08 42 00 16 00 02 e6
>  Type 185 Record: #67
>    Data 00: b9 08 43 00 17 06 02 00
>  Type 185 Record: #68
>    Data 00: b9 08 44 00 18 02 02 e6
>  Type 185 Record: #69
>    Data 00: b9 33 45 00 19 07 0c 05 03 00 fb 0d aa 00 d9 00
>    Data 10: 0e be 00 f1 00 0f c2 00 ff 00 10 0a 05 38 3c 11
>    Data 20: 0a 05 22 24 12 0a 05 3b 3e 13 15 a6 32 02 00 00
>    Data 30: 00 00 00
>  Type 185 Record: #70
>    Data 00: b9 08 46 00 ff 00 00 00
>  Type 186 Record: #71
>    Data 00: ba 0f 47 00 06 09 18 76 aa 00 00 00 06 0b ea
>  Type 187 Record: #72
>    Data 00: bb 0c 48 00 01 01 11 08 09 05 08 23
>  Type 187 Record: #73
>    Data 00: bb 0c 49 00 02 01 11 08 09 05 08 24
>  Type 187 Record: #74
>    Data 00: bb 0c 4a 00 03 01 11 08 09 05 08 21
>  Type 188 Record: #75
>    Data 00: bc 08 4b 00 38 38 31 24
>  Type 189 Record: #76
>    Data 00: bd 07 4c 00 ff 6b 00
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 10107 System
>  [Created at sys.56]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>05: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0802 Timer (8254)
>  [Created at misc.228]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (26593 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>11: None 00.0: 0701 Parallel controller (SPP)
>  [Created at misc.260]
>  Unique ID: YMnp.ecK7NLYWZ5D
>  Hardware Class: unknown
>  Model: "Parallel controller"
>  Device File: /dev/lp0
>  I/O Ports: 0x378-0x37a (rw)
>  I/O Ports: 0x37b-0x37f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>12: None 00.0: 10400 PS/2 Controller
>  [Created at misc.302]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>14: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x1feeffff (rw)
>  Memory Size: 512 MB
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>15: PCI 00.0: 0600 Host bridge
>  [Created at pci.271]
>  Unique ID: qLht.uHA9AE7c7m5
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "Siemens Nixdorf 82815 815 Chipset Host Bridge and Memory Controller Hub"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x1130 "82815 815 Chipset Host Bridge and Memory Controller Hub"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x005a 
>  Revision: 0x02
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>16: PCI 02.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.271]
>  Unique ID: _Znp.f0AtA+O+HL3
>  SysFS ID: /devices/pci0000:00/0000:00:02.0
>  SysFS BusID: 0000:00:02.0
>  Hardware Class: graphics card
>  Model: "Siemens Nixdorf I815"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x1132 "I815"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x004c 
>  Revision: 0x02
>  Memory Range: 0xf8000000-0xfbffffff (rw,prefetchable)
>  Memory Range: 0xf4000000-0xf407ffff (rw,non-prefetchable)
>  IRQ: 10 (no events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Driver Info #0:
>    XFree86 v4 Server Module: i810
>    Color Depths: 8, 16, 24
>    Extensions: 
>    Options: 
>  Driver Info #1:
>    XFree86 v4 Server Module: i810
>    3D Support: yes
>    Color Depths: 16
>    Extensions: dri
>    Options: 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>17: PCI 1e.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.271]
>  Unique ID: 6NW+.carL4jV6EX3
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0
>  SysFS BusID: 0000:00:1e.0
>  Hardware Class: bridge
>  Model: "Intel 82801 PCI Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x244e "82801 PCI Bridge"
>  Revision: 0x02
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>18: PCI 1f.0: 0601 ISA bridge
>  [Created at pci.271]
>  Unique ID: BUZT.r8Jk3vK4lo8
>  SysFS ID: /devices/pci0000:00/0000:00:1f.0
>  SysFS BusID: 0000:00:1f.0
>  Hardware Class: bridge
>  Model: "Intel 82801BA ISA Bridge (LPC)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2440 "82801BA ISA Bridge (LPC)"
>  Revision: 0x02
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>19: PCI 1f.1: 0101 IDE interface
>  [Created at pci.271]
>  Unique ID: 3p2J.rWz_9yJnT1D
>  SysFS ID: /devices/pci0000:00/0000:00:1f.1
>  SysFS BusID: 0000:00:1f.1
>  Hardware Class: storage
>  Model: "Siemens Nixdorf 82801BA IDE U100"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x244b "82801BA IDE U100"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x0055 
>  Revision: 0x02
>  Driver: "PIIX_IDE"
>  I/O Ports: 0x2400-0x240f (rw)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  I/O Ports: 0x170-0x177 (rw)
>  I/O Port: 0x376 (rw)
>  IRQ: 14 (73 events)
>  IRQ: 15 (801 events)
>  Driver Info #0:
>    Driver Status: piix is active
>    Driver Activation Cmd: "modprobe piix"
>  Driver Info #1:
>    Driver Status: generic is not active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>20: PCI 1f.2: 0c03 USB Controller (UHCI)
>  [Created at pci.271]
>  Unique ID: w7Y8.PW40u6AFucA
>  SysFS ID: /devices/pci0000:00/0000:00:1f.2
>  SysFS BusID: 0000:00:1f.2
>  Hardware Class: usb controller
>  Model: "Siemens Nixdorf 82801BA/BAM USB (Hub #1)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2442 "82801BA/BAM USB (Hub #1)"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x0055 
>  Revision: 0x02
>  Driver: "uhci_hcd"
>  I/O Ports: 0x1000-0x101f (rw)
>  IRQ: 169 (no events)
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>21: PCI 1f.3: 0c05 SMBus
>  [Created at pci.271]
>  Unique ID: nS1_.yLvAuEI3qE9
>  SysFS ID: /devices/pci0000:00/0000:00:1f.3
>  SysFS BusID: 0000:00:1f.3
>  Hardware Class: unknown
>  Model: "Siemens Nixdorf 82801BA/BAM SMBus"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2443 "82801BA/BAM SMBus"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x0055 
>  Revision: 0x02
>  I/O Ports: 0x1400-0x140f (rw)
>  IRQ: 5 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>22: PCI 1f.4: 0c03 USB Controller (UHCI)
>  [Created at pci.271]
>  Unique ID: fnWp.RLzVrFPfxNB
>  SysFS ID: /devices/pci0000:00/0000:00:1f.4
>  SysFS BusID: 0000:00:1f.4
>  Hardware Class: usb controller
>  Model: "Siemens Nixdorf 82801BA/BAM USB (Hub #2)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2444 "82801BA/BAM USB (Hub #2)"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x0055 
>  Revision: 0x02
>  Driver: "uhci_hcd"
>  I/O Ports: 0x1800-0x181f (rw)
>  IRQ: 177 (no events)
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>23: PCI 1f.5: 0401 Multimedia audio controller
>  [Created at pci.271]
>  Unique ID: W60f.J4BynvKSPaF
>  SysFS ID: /devices/pci0000:00/0000:00:1f.5
>  SysFS BusID: 0000:00:1f.5
>  Hardware Class: sound
>  Model: "Siemens Nixdorf 82801BA/BAM AC'97 Audio"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2445 "82801BA/BAM AC'97 Audio"
>  SubVendor: pci 0x110a "Siemens Nixdorf AG"
>  SubDevice: pci 0x0056 
>  Revision: 0x02
>  I/O Ports: 0x2000-0x20ff (rw)
>  I/O Ports: 0x1c00-0x1c3f (rw)
>  IRQ: 5 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>24: PCI 108.0: 0200 Ethernet controller
>  [Created at pci.271]
>  Unique ID: 75Hn.a63RcsNVPF6
>  Parent ID: 6NW+.carL4jV6EX3
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:08.0
>  SysFS BusID: 0000:01:08.0
>  Hardware Class: network
>  Model: "Intel EtherExpress PRO/100 VM"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2449 "82801BA/BAM/CA/CAM Ethernet Controller"
>  SubVendor: pci 0x8086 "Intel Corporation"
>  SubDevice: pci 0x3014 "EtherExpress PRO/100 VM"
>  Revision: 0x01
>  Memory Range: 0xf4100000-0xf4100fff (rw,non-prefetchable)
>  I/O Ports: 0x3000-0x3fff (rw)
>  IRQ: 9 (no events)
>  Driver Info #0:
>    Driver Status: e100 is not active
>    Driver Activation Cmd: "modprobe e100"
>  Driver Info #1:
>    Driver Status: eepro100 is not active
>    Driver Activation Cmd: "modprobe eepro100"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #17 (PCI bridge)
>
>25: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: z9pp.jDhFyyFrbg5
>  SysFS ID: /devices/pnp0/00:00
>  SysFS BusID: 00:00
>  Hardware Class: unknown
>  Model: "Unclassified device"
>  SubVendor: INT 
>  SubDevice: eisa 0x0800 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>26: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: QL3u.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:01
>  SysFS BusID: 00:01
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>27: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: tWJy.ld94kxNGZf5
>  SysFS ID: /devices/pnp0/00:02
>  SysFS BusID: 00:02
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0200 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>28: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: KiZ0.WYwRElrJa93
>  SysFS ID: /devices/pnp0/00:03
>  SysFS BusID: 00:03
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0b00 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>29: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: ntp4.DE8RM9cWQQ8
>  SysFS ID: /devices/pnp0/00:04
>  SysFS BusID: 00:04
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c04 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>30: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: E349.bvKf3UMzZfE
>  SysFS ID: /devices/pnp0/00:05
>  SysFS BusID: 00:05
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0800 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>31: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: hEKD.SQ+K0pwodME
>  SysFS ID: /devices/pnp0/00:06
>  SysFS BusID: 00:06
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0a05 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>32: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: NhVi.xhndlW9HXJ7
>  SysFS ID: /devices/pnp0/00:07
>  SysFS BusID: 00:07
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0303 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>33: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: qslm.t7Yh1tpgb13
>  SysFS ID: /devices/pnp0/00:08
>  SysFS BusID: 00:08
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0f13 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>34: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: H20r.yhTOLOXWEq7
>  SysFS ID: /devices/pnp0/00:09
>  SysFS BusID: 00:09
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0700 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>35: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: iT2w.13ubA72AEK3
>  SysFS ID: /devices/pnp0/00:0a
>  SysFS BusID: 00:0a
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0400 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>36: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: 9fI_.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:0b
>  SysFS BusID: 00:0b
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>37: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  Unique ID: cqY2.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:0c
>  SysFS BusID: 00:0c
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>38: None 00.0: 0700 Serial controller (16550)
>  [Created at serial.73]
>  Unique ID: S_Uw.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS0
>  I/O Ports: 0x3f8-0x3ff (rw)
>  IRQ: 4 (24 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>39: None 00.1: 0700 Serial controller (16550)
>  [Created at serial.73]
>  Unique ID: v9l_.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS1
>  I/O Ports: 0x2f8-0x2ff (rw)
>  IRQ: 3 (22 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>40: IDE 00.0: 10600 Disk
>  [Created at block.188]
>  Unique ID: l_yX.Def54Yk_t_B
>  Parent ID: 3p2J.rWz_9yJnT1D
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  Hardware Class: disk
>  Model: "SAMSUNG SV2042H"
>  Vendor: "SAMSUNG"
>  Device: "SV2042H"
>  Revision: "PK100-12"
>  Serial ID: "0273J1FR137401"
>  Driver: "PIIX_IDE", "ide-disk", "ide-disk"
>  Device File: /dev/disk/by-id/ata-SAMSUNG_SV2042H_0273J1FR137401
>  Device Files: /dev/hda, /dev/disk/by-id/ata-SAMSUNG_SV2042H_0273J1FR137401, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0
>  Device Number: block 3:0-3:63
>  BIOS id: 0x80
>  Geometry (Logical): CHS 39549/16/63
>  Size: 39865392 sectors a 512 bytes
>  Geometry (BIOS EDD): CHS 39549/16/63
>  Size (BIOS EDD): 39865392 sectors
>  Geometry (BIOS Legacy): CHS 1023/255/63
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #19 (IDE interface)
>
>41: IDE 02.0: 10602 CD-ROM
>  [Created at block.192]
>  Unique ID: 90A1.YmLq_wS3vU2
>  Parent ID: 3p2J.rWz_9yJnT1D
>  SysFS ID: /block/hdc
>  SysFS BusID: 1.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>  Hardware Class: cdrom
>  Model: "FX4830T"
>  Device: "FX4830T"
>  Revision: "R02E"
>  Serial ID: ""
>  Driver: "PIIX_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/hdc
>  Device Number: block 22:0
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #19 (IDE interface)
>  Drive Speed: 48
>  Volume ID: "SU1000.001"
>  Application: "SuSE-Linux-CD-OSS-i386-10.0#0"
>  Publisher: "Novell, Inc."
>  Preparer: "CD-Team, http://www.suse.de/feedback"
>  Creation date: "2005080813541700"
>  El Torito info: platform 0, bootable
>    Boot Catalog: at sector 0x00dc
>    Id String: "Novell, Inc."
>    Media: none starting at sector 0x00dd
>    Load: 2048 bytes
>
>42: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  Unique ID: k4bc.DgRMbl3WQZ7
>  Parent ID: w7Y8.PW40u6AFucA
>  SysFS ID: /devices/pci0000:00/0000:00:1f.2/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-rc5-git3-3-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-rc5-git3-3-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1f.2"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #20 (USB Controller)
>
>43: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  Unique ID: pBe4.l7bWKGfxJ76
>  Parent ID: fnWp.RLzVrFPfxNB
>  SysFS ID: /devices/pci0000:00/0000:00:1f.4/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-rc5-git3-3-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-rc5-git3-3-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1f.4"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #22 (USB Controller)
>
>44: PS/2 00.0: 10800 Keyboard
>  [Created at input.120]
>  Unique ID: EXC1.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "AT Translated Set 2 keyboard"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "AT Translated Set 2 keyboard"
>  Device File: /dev/input/event1
>  Device Number: char 13:65
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>45: PS/2 00.0: 10500 PS/2 Mouse
>  [Created at input.140]
>  Unique ID: AH6Q.CjzNTUPH+qC
>  Hardware Class: mouse
>  Model: "ImPS/2 Logitech Wheel Mouse"
>  Vendor: int 0x0210 
>  Device: int 0x0014 "ImPS/2 Logitech Wheel Mouse"
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Number: char 13:63 (char 13:32)
>  Driver Info #0:
>    Buttons: 4
>    Wheels: 1
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>46: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: Intel
>  Vendor: "GenuineIntel"
>  Model: 6.8.6 "Pentium III (Coppermine)"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse
>  Clock: 993 MHz
>  Cache: 256 kb
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>47: None 00.0: 10700 Loopback
>  [Created at net.111]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 102939: 45230 | 45231 | 45477 | 49574 | 49576