Attachment 46205 Details for Bug 105019

boot.msg from installation

boot.msg-wegen-pcmcia (text/plain), 14.60 KB, created by Christian Boltz on 2005-08-16 19:16:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Christian Boltz

Created: 2005-08-16 19:16:26 UTC

Size: 14.60 KB

patch

obsolete

><5>Linux version 2.6.13-rc5-git3-3-default (geeko@buildhost) (gcc version 4.0.2 20050802 (prerelease) (SUSE Linux)) #1 Fri Aug 5 14:06:24 UTC 2005
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
><4> BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data)
><4> BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS)
><4> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
><4> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
><4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
><5>127MB HIGHMEM available.
><5>896MB LOWMEM available.
><7>On node 0 totalpages: 262000
><7>  DMA zone: 4096 pages, LIFO batch:1
><7>  Normal zone: 225280 pages, LIFO batch:31
><7>  HighMem zone: 32624 pages, LIFO batch:15
><6>DMI present.
><7>ACPI: RSDP (v000 ACER                                  ) @ 0x000f60c0
><7>ACPI: RSDT (v001 ACER   Cardinal 0x20020919  LTP 0x00000000) @ 0x3ff74c20
><7>ACPI: FADT (v001 ACER   Cardinal 0x20020919 PTL  0x0000001e) @ 0x3ff7af64
><7>ACPI: BOOT (v001 ACER   Cardinal 0x20020919  LTP 0x00000001) @ 0x3ff7afd8
><7>ACPI: DSDT (v001 ACER   Cardinal 0x20020919 MSFT 0x0100000d) @ 0x00000000
><6>ACPI: PM-Timer IO Port: 0x1008
><4>Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
><4>Built 1 zonelists
><5>Kernel command line: BOOT_IMAGE=linux initrd=initrd splash=silent vga=0x317
><6>bootsplash: silent mode.
><4>Local APIC disabled by BIOS -- you can enable it with "lapic"
><7>mapped APIC to ffffd000 (01802000)
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 65536 bytes)
><4>Detected 1593.828 MHz processor.
><6>Using pmtmr for high-res timesource
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 1028252k/1048000k available (2031k kernel code, 18828k reserved, 713k data, 204k init, 130496k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 3190.04 BogoMIPS (lpj=6380096)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Disabled at boot.
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
><7>CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 1024K
><7>CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>mtrr: v2.0 (20020519)
><4>CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 6413k freed
><6>ACPI: Looking for DSDT in initrd... not found!
><4> not found!
><4> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
><4>Parsing all Control Methods:.....................................................................................................................................................................................................
><4>Table [DSDT](id F004) - 729 Objects with 51 Devices 197 Methods 15 Regions
><4>ACPI Namespace successfully loaded at root c042e660
><4>ACPI: setting ELCR to 0200 (from 0420)
><4>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd732, last bus=2
><6>PCI: Using configuration type 1
><6>ACPI: Subsystem revision 20050408
><4>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1024 [06] ev_create_gpe_block   : Found 5 Wake, Enabled 1 Runtime GPEs in this block
><4>Completing Region/Field/Buffer/Package initialization:...................................................................................
><4>Initialized 15/15 Regions 3/3 Fields 41/41 Buffers 24/29 Packages (738 nodes)
><4>Executing all Device _STA and_INI methods:.......................................................
><4>55 Devices found containing: 55 _STA, 2 _INI methods
><6>ACPI: Interpreter enabled
><6>ACPI: Using PIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><4>PCI: Probing PCI hardware (bus 00)
><6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
><7>Boot video device is 0000:01:00.0
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 11 12) *10
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 11 12) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
><6>ACPI: Embedded Controller [EC0] (gpe 29)
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
><6>ACPI: Power Resource [PFN0] (off)
><6>ACPI: Power Resource [PFN1] (off)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 10 devices
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: 3000-3fff
><6>  MEM window: d0100000-d01fffff
><6>  PREFETCH window: d8000000-dfffffff
><4>PCI: Bus 3, cardbus bridge: 0000:02:06.0
><4>  IO window: 00004000-00004fff
><4>  IO window: 00005000-00005fff
><4>  PREFETCH window: 40000000-41ffffff
><4>  MEM window: 46000000-47ffffff
><4>PCI: Bus 7, cardbus bridge: 0000:02:06.1
><4>  IO window: 00006000-00006fff
><4>  IO window: 00007000-00007fff
><4>  PREFETCH window: 42000000-43ffffff
><4>  MEM window: 48000000-49ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 4000-4fff
><6>  MEM window: d0200000-d05fffff
><6>  PREFETCH window: 40000000-43ffffff
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
><4>PCI: setting IRQ 10 as level-triggered
><6>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><4>PCI: Enabling device 0000:02:06.1 (0080 -> 0083)
><6>ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:02:06.1 to 64
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><6>Simple Boot Flag at 0x37 set to 0x1
><6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
><5>apm: overridden by ACPI.
><6>audit: initializing netlink socket (disabled)
><4>audit(1124211826.324:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 6144k, total 65536k
><6>vesafb: mode is 1024x768x16, linelength=2048, pages=41
><6>vesafb: protected mode interface info at c000:54bf
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 72942 bytes,<6>...found (1024x768, 36789 bytes, v3).
><4>Console: switching to colour frame buffer device 127x44
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12
><6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>acpi_bus-0212 [05] acpi_bus_set_power    : Device is not power manageable
><6>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><6>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered
><4>floppy0: no floppy controllers found
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>loop: loaded (max 8 devices)
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker
><6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 3.38
><6>NET: Registered protocol family 2
><6>input: AT Translated Set 2 keyboard on isa0060/serio0
><4>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
><4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
><4>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><4>Using IPI Shortcut mode
><4>ACPI wakeup devices: 
><4>MDM0 GLAN USB1 USB2 USB3 
><6>ACPI: (supports S0 S3 S4 S5)
><6>Freeing unused kernel memory: 204k freed
><6>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
><6>input: SynPS/2 Synaptics TouchPad on isa0060/serio1
><6>Non-volatile memory driver v1.2
><6>NET: Registered protocol family 17
><5>SCSI subsystem initialized
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: debug port 1
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 6 ports detected
><6>usbcore: registered new driver hiddev
><6>usbcore: registered new driver usbhid
><6>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
><6>USB Universal Host Controller Interface driver v2.3
><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
><4>PCI: setting IRQ 5 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>Initializing USB Mass Storage driver...
><6>usbcore: registered new driver usb-storage
><6>USB Mass Storage support registered.
><7>ieee1394: Initialized config rom entry `ip1394'
><6>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
><6>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
><6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[d0209000-d02097ff]  Max Packet=[2048]
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f0000140458]
><6>sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: Thermal Zone [THRM] (45 C)
><6>ACPI: Fan [FAN0] (off)
><6>ACPI: Fan [FAN1] (off)
><6>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><6>Yenta: CardBus bridge found at 0000:02:06.0 [1025:001f]
><6>Yenta O2: res at 0x94/0xD4: 00/ea
><6>Yenta O2: enabling read prefetch/write burst
><6>Yenta: ISA IRQ mask 0x0898, PCI irq 10
><6>Socket status: 30000006
><6>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
><6>cs: IO port probe 0x4000-0x4fff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff
><6>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
><6>ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><6>Yenta: CardBus bridge found at 0000:02:06.1 [1025:001f]
><6>Yenta: ISA IRQ mask 0x0898, PCI irq 10
><6>Socket status: 30000410
><6>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
><6>cs: IO port probe 0x4000-0x4fff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff
><6>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
><6>cs: memory probe 0xd0200000-0xd05fffff: excluding 0xd0200000-0xd023ffff
><6>ICH4: IDE controller at PCI slot 0000:00:1f.1
><4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
><6>ICH4: chipset revision 3
><6>ICH4: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
><6>    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
><7>Probing IDE interface ide0...
><4>hda: ST94011A, ATA DISK drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><6>hda: max request size: 1024KiB
><6>hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
><6>hda: cache flushes supported
><6> hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
><7>Probing IDE interface ide1...
><4>hdc: UJDA740 DVD/CDRW, ATAPI CD/DVD-ROM drive
><4>ide1 at 0x170-0x177,0x376 on irq 15
><6>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><7>ISO 9660 Extensions: RRIP_1991A

Actions: View

Attachments on bug 105019: 46205