Attachment 46534 Details for Bug 105573

hwinfo.txt

hwinfo.txt (text/plain), 200.45 KB, created by Lenz Grimmer on 2005-08-18 15:04:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lenz Grimmer

Created: 2005-08-18 15:04:57 UTC

Size: 200.45 KB

patch

obsolete

>============ start debug info ============
>libhd version 11.12 (ia32)
>kernel version is 2.6
>----- /proc/cmdline -----
>  root=/dev/system/suse10root vga=0x31a selinux=0    resume=/dev/hda2  splash=silent
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x02138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc +dsl)
>shm: attached segment 950272 at 0x40564000
>>> hal.1: read hal data
>  hal: connected to: :1.21
>----- hal device list -----
>  0: udi = '/org/freedesktop/Hal/devices/net_00_09_5b_3b_b3_14'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_09_5b_3b_b3_14'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80211.mac_address = 40185344788ull (0x95b3bb314ull)
>  info.product = 'Networking Interface'
>  net.interface_up = true
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 6 (0x6)
>  net.address = '00:09:5b:3b:b3:14'
>  net.interface = 'eth0'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_1385_4100'
>  info.capabilities = { 'net', 'net.80211' }
>  info.category = 'net.80211'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1385_4100'
>  linux.sysfs_path = '/sys/class/net/eth0'
>
>  1: udi = '/org/freedesktop/Hal/devices/acpi_SLPB'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_SLPB'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Sleep Button'
>  button.type = 'sleep'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/sleep/SLPB'
>
>  2: udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRF'
>
>  3: udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRB'
>
>  4: udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  linux.hotplug_type = 4 (0x4)
>  processor.can_throttle = true
>  processor.number = 0 (0x0)
>  info.capabilities = { 'processor' }
>  info.category = 'processor'
>  info.product = 'Processor'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 1 (0x1)
>  linux.acpi_path = '/proc/acpi/processor/CPU0'
>
>  5: udi = '/org/freedesktop/Hal/devices/computer_storage'
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'floppy'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  storage.policy.desired_mount_point = 'floppy'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/computer_storage'
>  info.udi = '/org/freedesktop/Hal/devices/computer_storage'
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  storage.removable = true
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  storage.physical_device = '/org/freedesktop/Hal/devices/computer'
>  storage.drive_type = 'floppy'
>  info.product = 'PC Floppy Drive'
>  info.vendor = ''
>  storage.vendor = 'PC Floppy Drive'
>  storage.model = ''
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = true
>  storage.bus = 'platform'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 2 (0x2)
>  block.device = '/dev/fd0'
>  linux.hotplug_type = 3 (0x3)
>  linux.sysfs_path_device = '/sys/block/fd0'
>  linux.sysfs_path = '/sys/block/fd0'
>
>  6: udi = '/org/freedesktop/Hal/devices/volume_uuid_31cd9186_2a0d_4428_9ef5_a47024bab0ec'
>  volume.policy.desired_mount_point = 'idedisk'
>  volume.policy.mount_filesystem = 'ext2'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_31cd9186_2a0d_4428_9ef5_a47024bab0ec'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (ext2)'
>  volume.size = 213825024ull (0xcbeb600ull)
>  volume.num_blocks = 417627 (0x65f5b)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 1 (0x1)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/boot'
>  volume.label = ''
>  volume.uuid = '31cd9186-2a0d-4428-9ef5-a47024bab0ec'
>  volume.fsversion = ''
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'ext2'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_662243204380'
>  block.is_volume = true
>  block.minor = 1 (0x1)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda1'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_662243204380'
>  linux.sysfs_path_device = '/sys/block/hda/hda1'
>  linux.sysfs_path = '/sys/block/hda/hda1'
>
>  7: udi = '/org/freedesktop/Hal/devices/volume_part2_size_1069286400'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1069286400'
>  volume.partition.msdos_part_table_type = 130 (0x82)
>  info.product = 'Volume (swap)'
>  volume.size = 1069286400ull (0x3fbc0400ull)
>  volume.num_blocks = 2088450 (0x1fde02)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 2 (0x2)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = '2'
>  volume.fsusage = 'other'
>  volume.fstype = 'swap'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_662243204380'
>  block.is_volume = true
>  block.minor = 2 (0x2)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda2'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_662243204380'
>  linux.sysfs_path_device = '/sys/block/hda/hda2'
>  linux.sysfs_path = '/sys/block/hda/hda2'
>
>  8: udi = '/org/freedesktop/Hal/devices/volume_uuid_4dbeb633_0dd3_9faf_85bb_064e0840ee28_0'
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4dbeb633_0dd3_9faf_85bb_064e0840ee28_0'
>  volume.partition.msdos_part_table_type = 253 (0xfd)
>  info.product = 'Volume (linux_raid_member)'
>  volume.size = 38741068800ull (0x90525cc00ull)
>  volume.num_blocks = 75666150 (0x48292e6)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 3 (0x3)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = '4dbeb633-0dd3-9faf-85bb-064e0840ee28'
>  volume.fsversion = '0.90.1'
>  volume.fsusage = 'raid'
>  volume.fstype = 'linux_raid_member'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_662243204380'
>  block.is_volume = true
>  block.minor = 3 (0x3)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda3'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_662243204380'
>  linux.sysfs_path_device = '/sys/block/hda/hda3'
>  linux.sysfs_path = '/sys/block/hda/hda3'
>
>  9: udi = '/org/freedesktop/Hal/devices/storage_serial_662243204380'
>  storage.policy.should_mount = false
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_662243204380'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_662243204380'
>  storage.firmware_version = 'AR1.0500'
>  storage.serial = '662243204380'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'MAXTOR 6L040J2'
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_1106_571_ide_0_0'
>  storage.drive_type = 'disk'
>  storage.vendor = ''
>  storage.model = 'MAXTOR 6L040J2'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_ide_0_0'
>  linux.sysfs_path_device = '/sys/block/hda'
>  linux.sysfs_path = '/sys/block/hda'
>
>  10: udi = '/org/freedesktop/Hal/devices/volume_part1_size_518160384'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_518160384'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (LVM2_member)'
>  volume.size = 518160384ull (0x1ee28000ull)
>  volume.num_blocks = 1012032 (0xf7140)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 1 (0x1)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = 'LVM2 001'
>  volume.fsusage = 'raid'
>  volume.fstype = 'LVM2_member'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_662209944312'
>  block.is_volume = true
>  block.minor = 1 (0x1)
>  block.major = 22 (0x16)
>  block.device = '/dev/hdc1'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_662209944312'
>  linux.sysfs_path_device = '/sys/block/hdc/hdc1'
>  linux.sysfs_path = '/sys/block/hdc/hdc1'
>
>  11: udi = '/org/freedesktop/Hal/devices/volume_part2_size_764951040'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_764951040'
>  volume.partition.msdos_part_table_type = 130 (0x82)
>  info.product = 'Volume (swap)'
>  volume.size = 764951040ull (0x2d983a00ull)
>  volume.num_blocks = 1494045 (0x16cc1d)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 2 (0x2)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = '2'
>  volume.fsusage = 'other'
>  volume.fstype = 'swap'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_662209944312'
>  block.is_volume = true
>  block.minor = 2 (0x2)
>  block.major = 22 (0x16)
>  block.device = '/dev/hdc2'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_662209944312'
>  linux.sysfs_path_device = '/sys/block/hdc/hdc2'
>  linux.sysfs_path = '/sys/block/hdc/hdc2'
>
>  12: udi = '/org/freedesktop/Hal/devices/volume_uuid_4dbeb633_0dd3_9faf_85bb_064e0840ee28'
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4dbeb633_0dd3_9faf_85bb_064e0840ee28'
>  volume.partition.msdos_part_table_type = 253 (0xfd)
>  info.product = 'Volume (linux_raid_member)'
>  volume.size = 38741068800ull (0x90525cc00ull)
>  volume.num_blocks = 75666150 (0x48292e6)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 3 (0x3)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = '4dbeb633-0dd3-9faf-85bb-064e0840ee28'
>  volume.fsversion = '0.90.1'
>  volume.fsusage = 'raid'
>  volume.fstype = 'linux_raid_member'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_662209944312'
>  block.is_volume = true
>  block.minor = 3 (0x3)
>  block.major = 22 (0x16)
>  block.device = '/dev/hdc3'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_662209944312'
>  linux.sysfs_path_device = '/sys/block/hdc/hdc3'
>  linux.sysfs_path = '/sys/block/hdc/hdc3'
>
>  13: udi = '/org/freedesktop/Hal/devices/storage_serial_662209944312'
>  storage.policy.should_mount = false
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_662209944312'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_662209944312'
>  storage.firmware_version = 'AR1.0500'
>  storage.serial = '662209944312'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'MAXTOR 6L040J2'
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_1106_571_ide_1_0'
>  storage.drive_type = 'disk'
>  storage.vendor = ''
>  storage.model = 'MAXTOR 6L040J2'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 22 (0x16)
>  block.device = '/dev/hdc'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_ide_1_0'
>  linux.sysfs_path_device = '/sys/block/hdc'
>  linux.sysfs_path = '/sys/block/hdc'
>
>  14: udi = '/org/freedesktop/Hal/devices/storage_model_LG_DVD_ROM_DRD_8160B'
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'cdrom'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrom'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_LG_DVD_ROM_DRD_8160B'
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_LG_DVD_ROM_DRD_8160B'
>  storage.cdrom.write_speed = 0 (0x0)
>  storage.cdrom.read_speed = 8448 (0x2100)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = false
>  storage.cdrom.dvdplusrw = false
>  storage.cdrom.dvdplusr = false
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = false
>  storage.cdrom.dvd = true
>  storage.cdrom.cdrw = false
>  storage.cdrom.cdr = false
>  storage.firmware_version = '1.01'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'LG DVD-ROM DRD-8160B'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_1106_571_ide_1_1'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'LG DVD-ROM DRD-8160B'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 64 (0x40)
>  block.major = 22 (0x16)
>  block.device = '/dev/hdd'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571_ide_1_1'
>  linux.sysfs_path_device = '/sys/block/hdd'
>  linux.sysfs_path = '/sys/block/hdd'
>
>  15: udi = '/org/freedesktop/Hal/devices/storage_serial_5VO2206DL02263'
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'cdrom'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrecorder'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5VO2206DL02263'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_5VO2206DL02263'
>  storage.cdrom.write_speed = 1411 (0x583)
>  storage.cdrom.read_speed = 7056 (0x1b90)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = false
>  storage.cdrom.dvdplusrw = false
>  storage.cdrom.dvdplusr = false
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = false
>  storage.cdrom.dvd = false
>  storage.cdrom.cdrw = true
>  storage.cdrom.cdr = true
>  storage.firmware_version = '0.010000'
>  storage.serial = '5VO2206DL02263'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'PHILIPS CDRW1610A'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_105a_d30_ide_2_0'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'PHILIPS CDRW1610A'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 33 (0x21)
>  block.device = '/dev/hde'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_105a_d30_ide_2_0'
>  linux.sysfs_path_device = '/sys/block/hde'
>  linux.sysfs_path = '/sys/block/hde'
>
>  16: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/timer'
>  linux.device_file = '/dev/snd/timer'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  alsa.device_file = '/dev/snd/timer'
>  info.product = 'ALSA Timer Device'
>  alsa.type = 'timer'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.sysfs_path = '/sys/class/sound/timer'
>
>  17: udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
>  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/seq'
>  linux.device_file = '/dev/snd/seq'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  alsa.device_file = '/dev/snd/seq'
>  info.product = 'ALSA Sequencer Device'
>  alsa.type = 'sequencer'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.sysfs_path = '/sys/class/sound/seq'
>
>  18: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux Port'
>  serio.description = 'i8042 Aux Port'
>  serio.id = 'serio0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
>
>  19: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Kbd Port'
>  serio.description = 'i8042 Kbd Port'
>  serio.id = 'serio1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
>
>  20: udi = '/org/freedesktop/Hal/devices/pci_1022_700e'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1022_700e'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'AMD-760 [IGD4-1P] System Controller'
>  pci.product = 'AMD-760 [IGD4-1P] System Controller'
>  info.vendor = 'Advanced Micro Devices [AMD]'
>  pci.vendor = 'Advanced Micro Devices [AMD]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4130 (0x1022)
>  pci.product_id = 28686 (0x700e)
>  info.linux.driver = 'agpgart-amdk7'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>
>  21: udi = '/org/freedesktop/Hal/devices/pci_102b_525'
>  info.udi = '/org/freedesktop/Hal/devices/pci_102b_525'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Millennium G450 Dual Head LX'
>  pci.subsys_vendor = 'Matrox Graphics, Inc.'
>  info.product = 'MGA G400 AGP'
>  pci.product = 'MGA G400 AGP'
>  info.vendor = 'Matrox Graphics, Inc.'
>  pci.vendor = 'Matrox Graphics, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 4139 (0x102b)
>  pci.subsys_product_id = 1346 (0x542)
>  pci.vendor_id = 4139 (0x102b)
>  pci.product_id = 1317 (0x525)
>  info.linux.driver = 'matrox_w1'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1022_700f'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:05.0'
>
>  22: udi = '/org/freedesktop/Hal/devices/pci_1022_700f'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1022_700f'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'AMD-760 [IGD4-1P] AGP Bridge'
>  pci.product = 'AMD-760 [IGD4-1P] AGP Bridge'
>  info.vendor = 'Advanced Micro Devices [AMD]'
>  pci.vendor = 'Advanced Micro Devices [AMD]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4130 (0x1022)
>  pci.product_id = 28687 (0x700f)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>
>  23: udi = '/org/freedesktop/Hal/devices/pci_1106_686'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_686'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'VT82C686/A PCI to ISA Bridge'
>  pci.subsys_vendor = 'VIA Technologies, Inc.'
>  info.product = 'VT82C686 [Apollo Super South]'
>  pci.product = 'VT82C686 [Apollo Super South]'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4358 (0x1106)
>  pci.subsys_product_id = 1670 (0x686)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 1670 (0x686)
>  info.linux.driver = 'parport_pc'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0'
>
>  24: udi = '/org/freedesktop/Hal/devices/pci_1106_571_ide_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_ide_0_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-disk'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.1/ide0/0.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.1/ide0/0.0'
>
>  25: udi = '/org/freedesktop/Hal/devices/pci_1106_571_ide_1_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_ide_1_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 1 (0x1)
>  info.linux.driver = 'ide-disk'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.1/ide1/1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.1/ide1/1.0'
>
>  26: udi = '/org/freedesktop/Hal/devices/pci_1106_571_ide_1_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571_ide_1_1'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (slave)'
>  ide.channel = 1 (0x1)
>  ide.host = 1 (0x1)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_571'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.1/ide1/1.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.1/ide1/1.1'
>
>  27: udi = '/org/freedesktop/Hal/devices/pci_1106_571'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_571'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE'
>  pci.subsys_vendor = 'VIA Technologies, Inc.'
>  info.product = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE'
>  pci.product = 'VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 138 (0x8a)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4358 (0x1106)
>  pci.subsys_product_id = 1393 (0x571)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 1393 (0x571)
>  info.linux.driver = 'VIA_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.1'
>
>  28: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-rc6-git7-3-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:07.2'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0'
>
>  29: udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if0_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if0_logicaldev_input'
>  input.product = '046a:0027'
>  info.product = '046a:0027'
>  linux.device_file = '/dev/input/event2'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event2'
>  info.capabilities = { 'input', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if0'
>  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if0'
>  linux.sysfs_path = '/sys/class/input/event2'
>
>  30: udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB HID Interface'
>  usb.interface.protocol = 1 (0x1)
>  usb.interface.subclass = 1 (0x1)
>  usb.interface.class = 3 (0x3)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'usbhid'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 3 (0x3)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1130 (0x46a)
>  usb.product_id = 39 (0x27)
>  usb.vendor = 'Cherry GmbH'
>  usb.product = 'USB HID Interface'
>  usb.device_revision_bcd = 7 (0x7)
>  usb.max_power = 100 (0x64)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.speed_bcd = 336 (0x150)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = false
>  usb.can_wake_up = true
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0'
>
>  31: udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if1_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if1_logicaldev_input'
>  input.product = '046a:0027'
>  info.product = '046a:0027'
>  linux.device_file = '/dev/input/event3'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event3'
>  info.capabilities = { 'input', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if1'
>  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if1'
>  linux.sysfs_path = '/sys/class/input/event3'
>
>  32: udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB HID Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 3 (0x3)
>  usb.interface.number = 1 (0x1)
>  info.linux.driver = 'usbhid'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 3 (0x3)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1130 (0x46a)
>  usb.product_id = 39 (0x27)
>  usb.vendor = 'Cherry GmbH'
>  usb.product = 'USB HID Interface'
>  usb.device_revision_bcd = 7 (0x7)
>  usb.max_power = 100 (0x64)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.speed_bcd = 336 (0x150)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = false
>  usb.can_wake_up = true
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1'
>
>  33: udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if2_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if2_logicaldev_input'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.hack.add_usb_parent = true
>  resmgr.class = 'input'
>  resmgr.device = '/dev/input/event4'
>  input.product = '046a:0027'
>  info.product = '046a:0027'
>  linux.device_file = '/dev/input/event4'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event4'
>  info.capabilities = { 'input', 'input.mouse' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if2'
>  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if2'
>  linux.sysfs_path = '/sys/class/input/event4'
>
>  34: udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if2'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if2'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB HID Interface'
>  usb.interface.protocol = 2 (0x2)
>  usb.interface.subclass = 1 (0x1)
>  usb.interface.class = 3 (0x3)
>  usb.interface.number = 2 (0x2)
>  info.linux.driver = 'usbhid'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 3 (0x3)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1130 (0x46a)
>  usb.product_id = 39 (0x27)
>  usb.vendor = 'Cherry GmbH'
>  usb.product = 'USB HID Interface'
>  usb.device_revision_bcd = 7 (0x7)
>  usb.max_power = 100 (0x64)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.speed_bcd = 336 (0x150)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = false
>  usb.can_wake_up = true
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2'
>
>  35: udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46a_27_noserial'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = false
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 336 (0x150)
>  usb_device.linux.device_number = 2 (0x2)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 100 (0x64)
>  usb_device.device_revision_bcd = 7 (0x7)
>  info.product = 'Unknown (0x0027)'
>  usb_device.product = 'Unknown (0x0027)'
>  info.vendor = 'Cherry GmbH'
>  usb_device.vendor = 'Cherry GmbH'
>  usb_device.product_id = 39 (0x27)
>  usb_device.vendor_id = 1130 (0x46a)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 3 (0x3)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1/1-2'
>
>  36: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:07.2'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-rc6-git7-3-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-rc6-git7-3-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.2/usb1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2/usb1'
>
>  37: udi = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'USB Controller'
>  pci.subsys_vendor = 'VIA Technologies, Inc. (Wrong ID)'
>  info.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  pci.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 2341 (0x925)
>  pci.subsys_product_id = 4660 (0x1234)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12344 (0x3038)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.2'
>
>  38: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_3_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_3_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.3/usb2/2-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-rc6-git7-3-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:07.3'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_3'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.3/usb2/2-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.3/usb2/2-0:1.0'
>
>  39: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_3'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_3'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:07.3'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-rc6-git7-3-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-rc6-git7-3-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.3/usb2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.3/usb2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.3/usb2'
>
>  40: udi = '/org/freedesktop/Hal/devices/pci_1106_3038'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'USB Controller'
>  pci.subsys_vendor = 'VIA Technologies, Inc. (Wrong ID)'
>  info.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  pci.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 2341 (0x925)
>  pci.subsys_product_id = 4660 (0x1234)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12344 (0x3038)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.3'
>
>  41: udi = '/org/freedesktop/Hal/devices/pci_1106_3057'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3057'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x3057)'
>  pci.subsys_vendor = 'VIA Technologies, Inc.'
>  info.product = 'VT82C686 [Apollo Super ACPI]'
>  pci.product = 'VT82C686 [Apollo Super ACPI]'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 5 (0x5)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4358 (0x1106)
>  pci.subsys_product_id = 12375 (0x3057)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12375 (0x3057)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.4'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.4'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.4'
>
>  42: udi = '/org/freedesktop/Hal/devices/pci_1385_4100'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1385_4100'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x4100)'
>  pci.subsys_vendor = 'Netgear'
>  info.product = '802.11b Wireless Adapter (MA301)'
>  pci.product = '802.11b Wireless Adapter (MA301)'
>  info.vendor = 'Netgear'
>  pci.vendor = 'Netgear'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 128 (0x80)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4997 (0x1385)
>  pci.subsys_product_id = 16640 (0x4100)
>  pci.vendor_id = 4997 (0x1385)
>  pci.product_id = 16640 (0x4100)
>  info.linux.driver = 'orinoco_plx'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0a.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0'
>
>  43: udi = '/org/freedesktop/Hal/devices/pci_1131_7134'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1131_7134'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1142)'
>  pci.subsys_vendor = 'TERRATEC Electronic GmbH'
>  info.product = 'SAA7134'
>  pci.product = 'SAA7134'
>  info.vendor = 'Philips Semiconductors'
>  pci.vendor = 'Philips Semiconductors'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 128 (0x80)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 5435 (0x153b)
>  pci.subsys_product_id = 4418 (0x1142)
>  pci.vendor_id = 4401 (0x1131)
>  pci.product_id = 28980 (0x7134)
>  info.linux.driver = 'saa7134'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0d.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0'
>
>  44: udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_midi_0_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_midi_0_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/midiC0D0'
>  linux.device_file = '/dev/snd/midiC0D0'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ES1371 DAC2/ADC OSS MIDI Device'
>  oss.type = 'midi'
>  oss.device = 0 (0x0)
>  oss.device_id = 'ES1371 DAC2/ADC'
>  oss.card_id = 'AudioPCI'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  oss.device_file = '/dev/snd/midiC0D0'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/midiC0D0'
>
>  45: udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_midi_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_midi_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/midi'
>  linux.device_file = '/dev/midi'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ES1371 DAC2/ADC OSS MIDI Device'
>  oss.type = 'midi'
>  oss.device = 0 (0x0)
>  oss.device_id = 'ES1371 DAC2/ADC'
>  oss.card_id = 'AudioPCI'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  oss.device_file = '/dev/midi'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/midi'
>
>  46: udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_playback_0_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_playback_0_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D1p'
>  linux.device_file = '/dev/snd/pcmC0D1p'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ES1371 DAC1 ALSA Playback Device'
>  alsa.type = 'playback'
>  alsa.device_id = 'ES1371 DAC1'
>  alsa.card_id = 'AudioPCI'
>  alsa.device = 1 (0x1)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  alsa.device_file = '/dev/snd/pcmC0D1p'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D1p'
>
>  47: udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_playback_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_playback_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D0p'
>  linux.device_file = '/dev/snd/pcmC0D0p'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ES1371 DAC2/ADC ALSA Playback Device'
>  alsa.type = 'playback'
>  alsa.device_id = 'ES1371 DAC2/ADC'
>  alsa.card_id = 'AudioPCI'
>  alsa.device = 0 (0x0)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  alsa.device_file = '/dev/snd/pcmC0D0p'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D0p'
>
>  48: udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_capture_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_capture_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D0c'
>  linux.device_file = '/dev/snd/pcmC0D0c'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ES1371 DAC2/ADC ALSA Capture Device'
>  alsa.type = 'capture'
>  alsa.device_id = 'ES1371 DAC2/ADC'
>  alsa.card_id = 'AudioPCI'
>  alsa.device = 0 (0x0)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  alsa.device_file = '/dev/snd/pcmC0D0c'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D0c'
>
>  49: udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_control_0__1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_alsa_control_0__1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/controlC0'
>  linux.device_file = '/dev/snd/controlC0'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'AudioPCI ALSA Control Device'
>  alsa.card_id = 'AudioPCI'
>  alsa.type = 'control'
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  alsa.device_file = '/dev/snd/controlC0'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/controlC0'
>
>  50: udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_mixer_0__1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_mixer_0__1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/mixer'
>  linux.device_file = '/dev/mixer'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ES1371 DAC2/ADC OSS Control Device'
>  oss.type = 'mixer'
>  oss.device_id = 'ES1371 DAC2/ADC'
>  oss.card_id = 'AudioPCI'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  oss.device_file = '/dev/mixer'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/mixer'
>
>  51: udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_0_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_0_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/dsp'
>  linux.device_file = '/dev/dsp'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ES1371 DAC2/ADC OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 0 (0x0)
>  oss.device_id = 'ES1371 DAC2/ADC'
>  oss.card_id = 'AudioPCI'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  oss.device_file = '/dev/dsp'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/dsp'
>
>  52: udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/audio'
>  linux.device_file = '/dev/audio'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ES1371 DAC2/ADC OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 0 (0x0)
>  oss.device_id = 'ES1371 DAC2/ADC'
>  oss.card_id = 'AudioPCI'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  oss.device_file = '/dev/audio'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/audio'
>
>  53: udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_0_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880_oss_pcm_0_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/adsp'
>  linux.device_file = '/dev/adsp'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ES1371 DAC2/ADC OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 1 (0x1)
>  oss.device_id = 'ES1371 DAC2/ADC'
>  oss.card_id = 'AudioPCI'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  oss.device_file = '/dev/adsp'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/adsp'
>
>  54: udi = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1274_5880'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Creative Sound Blaster AudioPCI128'
>  pci.subsys_vendor = 'Ensoniq'
>  info.product = '5880 AudioPCI'
>  pci.product = '5880 AudioPCI'
>  info.vendor = 'Ensoniq'
>  pci.vendor = 'Ensoniq'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 4724 (0x1274)
>  pci.subsys_product_id = 8192 (0x2000)
>  pci.vendor_id = 4724 (0x1274)
>  pci.product_id = 22656 (0x5880)
>  info.linux.driver = 'ENS1371'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0'
>
>  55: udi = '/org/freedesktop/Hal/devices/pci_105a_d30_ide_2_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_105a_d30_ide_2_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 2 (0x2)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_105a_d30'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0/ide2/2.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0/ide2/2.0'
>
>  56: udi = '/org/freedesktop/Hal/devices/pci_105a_d30'
>  info.udi = '/org/freedesktop/Hal/devices/pci_105a_d30'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Ultra100'
>  pci.subsys_vendor = 'Promise Technology, Inc.'
>  info.product = 'PDC20265 (FastTrak100 Lite/Ultra100)'
>  pci.product = 'PDC20265 (FastTrak100 Lite/Ultra100)'
>  info.vendor = 'Promise Technology, Inc.'
>  pci.vendor = 'Promise Technology, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 128 (0x80)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4186 (0x105a)
>  pci.subsys_product_id = 19763 (0x4d33)
>  pci.vendor_id = 4186 (0x105a)
>  pci.product_id = 3376 (0xd30)
>  info.linux.driver = 'Promise_Old_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:10.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:10.0'
>
>  57: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'System Board'
>  pnp.description = 'System Board'
>  pnp.id = 'PNP0c01'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:00'
>  linux.sysfs_path = '/sys/devices/pnp0/00:00'
>
>  58: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:01'
>  linux.sysfs_path = '/sys/devices/pnp0/00:01'
>
>  59: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT DMA Controller'
>  pnp.description = 'AT DMA Controller'
>  pnp.id = 'PNP0200'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:02'
>  linux.sysfs_path = '/sys/devices/pnp0/00:02'
>
>  60: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT Real-Time Clock'
>  pnp.description = 'AT Real-Time Clock'
>  pnp.id = 'PNP0b00'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:03'
>  linux.sysfs_path = '/sys/devices/pnp0/00:03'
>
>  61: udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT-style speaker sound'
>  pnp.description = 'AT-style speaker sound'
>  pnp.id = 'PNP0800'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:04'
>  linux.sysfs_path = '/sys/devices/pnp0/00:04'
>
>  62: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Math Coprocessor'
>  pnp.description = 'Math Coprocessor'
>  pnp.id = 'PNP0c04'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:05'
>  linux.sysfs_path = '/sys/devices/pnp0/00:05'
>
>  63: udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PC standard floppy disk controller'
>  pnp.description = 'PC standard floppy disk controller'
>  pnp.id = 'PNP0700'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:06'
>  linux.sysfs_path = '/sys/devices/pnp0/00:06'
>
>  64: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'modem'
>  resmgr.device = '/dev/ttyS0'
>  linux.device_file = '/dev/ttyS0'
>  linux.subsystem = 'tty'
>  linux.hotplug_type = 2 (0x2)
>  info.product = '16550A-compatible COM port'
>  serial.type = 'platform'
>  serial.port = 0 (0x0)
>  serial.device = '/dev/ttyS0'
>  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
>  info.capabilities = { 'serial' }
>  info.category = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
>  linux.sysfs_path = '/sys/class/tty/ttyS0'
>
>  65: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = '16550A-compatible COM port'
>  pnp.description = '16550A-compatible COM port'
>  pnp.id = 'PNP0501'
>  info.linux.driver = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:07'
>  linux.sysfs_path = '/sys/devices/pnp0/00:07'
>
>  66: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'modem'
>  resmgr.device = '/dev/ttyS1'
>  linux.device_file = '/dev/ttyS1'
>  linux.subsystem = 'tty'
>  linux.hotplug_type = 2 (0x2)
>  info.product = '16550A-compatible COM port'
>  serial.type = 'platform'
>  serial.port = 1 (0x1)
>  serial.device = '/dev/ttyS1'
>  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.capabilities = { 'serial' }
>  info.category = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.sysfs_path = '/sys/class/tty/ttyS1'
>
>  67: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = '16550A-compatible COM port'
>  pnp.description = '16550A-compatible COM port'
>  pnp.id = 'PNP0501'
>  info.linux.driver = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:08'
>  linux.sysfs_path = '/sys/devices/pnp0/00:08'
>
>  68: udi = '/org/freedesktop/Hal/devices/pnp_PNP0400'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0400'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Standard LPT printer port'
>  pnp.description = 'Standard LPT printer port'
>  pnp.id = 'PNP0400'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:09'
>  linux.sysfs_path = '/sys/devices/pnp0/00:09'
>
>  69: udi = '/org/freedesktop/Hal/devices/computer'
>  storage.policy.default.mount_option.exec = true
>  storage.policy.default.mount_option.pamconsole = true
>  storage.policy.default.mount_option.noauto = true
>  storage.policy.default.managed_keyword.secondary = 'kudzu'
>  storage.policy.default.managed_keyword.primary = 'managed'
>  storage.policy.default.use_managed_keyword = true
>  storage.policy.default.mount_root = '/media'
>  info.addons = { 'hald-addon-acpi' }
>  system.product = ' 00000000'
>  system.vendor = ''
>  smbios.chassis.type = 'Desktop'
>  smbios.chassis.manufacturer = ''
>  smbios.system.uuid = 'Not Present'
>  smbios.system.serial = '00000000'
>  smbios.system.version = '00000000'
>  smbios.system.product = ''
>  smbios.system.manufacturer = ''
>  smbios.bios.release_date = '07/15/2003'
>  smbios.bios.version = '6.00 PG'
>  smbios.bios.vendor = 'Award Software International, Inc.'
>  power_management.acpi.linux.version = '20050408'
>  power_management.type = 'acpi'
>  power_management.is_enabled = true
>  system.formfactor = 'desktop'
>  system.kernel.machine = 'i686'
>  system.kernel.version = '2.6.13-rc6-git7-3-default'
>  system.kernel.name = 'Linux'
>  info.udi = '/org/freedesktop/Hal/devices/computer'
>  info.product = 'Computer'
>  linux.sysfs_path_device = '(none)'
>  info.bus = 'unknown'
>----- hal device list end -----
>>> floppy.1: get nvram
>>> floppy.2: klog info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
>/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
>  bios: 2 disks
>  bios: 639k low mem
>/dev/mem[0x9fc00, 1]: mmap(, 4096,,,, 0x9f000) ok
>/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
>  bios: EBDA 0x00400 bytes at 0x9fc00
>>> bios.2: rom
>----- SMBIOS Entry Point 0xf13e0 - 0xf13fe -----
>  f13e0  5f 53 4d 5f 2e 1f 02 02 51 00 00 00 00 00 00 00  "_SM_....Q......."
>  f13f0  5f 44 4d 49 5f ad 58 04 00 08 0f 00 26 00 22  "_DMI_.X.....&.""
>----- SMBIOS Entry Point end -----
>/dev/mem[0xf0800, 1112]: mmap(, 4096,,,, 0xf0000) ok
>----- SMBIOS Structure Table 0xf0800 - 0xf0c57 -----
>  f0800  00 13 00 00 01 02 00 f0 03 03 90 de cb 7f 00 00  "................"
>  f0810  00 00 37 41 77 61 72 64 20 53 6f 66 74 77 61 72  "..7Award Softwar"
>  f0820  65 20 49 6e 74 65 72 6e 61 74 69 6f 6e 61 6c 2c  "e International,"
>  f0830  20 49 6e 63 2e 00 36 2e 30 30 20 50 47 00 30 37  " Inc..6.00 PG.07"
>  f0840  2f 31 35 2f 32 30 30 33 00 00 01 19 01 00 01 02  "/15/2003........"
>  f0850  03 04 ff ff ff ff ff ff ff ff ff ff ff ff ff ff  "................"
>  f0860  ff ff 06 20 20 20 20 20 20 20 20 20 20 20 20 20  "...             "
>  f0870  20 20 20 00 20 20 20 20 20 20 20 20 20 20 20 20  "   .            "
>  f0880  20 20 20 20 00 30 30 30 30 30 30 30 30 00 30 30  "    .00000000.00"
>  f0890  30 30 30 30 30 30 00 00 02 08 02 00 01 02 03 04  "000000.........."
>  f08a0  47 69 67 61 62 79 74 65 20 54 65 63 68 6e 6f 6c  "Gigabyte Technol"
>  f08b0  6f 67 79 20 43 6f 2e 2c 20 4c 54 44 00 37 44 58  "ogy Co., LTD.7DX"
>  f08c0  52 20 20 20 20 00 31 2e 78 00 30 30 30 30 30 30  "R    .1.x.000000"
>  f08d0  30 30 00 00 03 0d 03 00 01 03 02 03 04 02 02 02  "00.............."
>  f08e0  02 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  ".               "
>  f08f0  20 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20  " .              "
>  f0900  20 20 00 30 30 30 30 30 30 30 30 00 30 30 30 30  "  .00000000.0000"
>  f0910  30 30 30 30 00 00 04 20 04 00 01 03 01 02 44 06  "0000... ......D."
>  f0920  00 00 ff f9 83 01 03 91 85 00 78 05 35 05 41 04  "..........x.5.A."
>  f0930  09 00 0a 00 ff ff 53 6f 63 6b 65 74 20 41 00 41  "......Socket A.A"
>  f0940  4d 44 00 41 4d 44 20 41 74 68 6c 6f 6e 28 74 6d  "MD.AMD Athlon(tm"
>  f0950  29 00 00 05 16 05 00 03 04 03 03 09 0c 00 01 01  ")..............."
>  f0960  02 03 06 00 07 00 08 00 04 20 00 00 06 0c 06 00  "......... ......"
>  f0970  01 01 0a 01 00 88 88 00 42 41 4e 4b 5f 30 00 00  "........BANK_0.."
>  f0980  06 0c 07 00 01 23 0a 01 00 88 88 00 42 41 4e 4b  ".....#......BANK"
>  f0990  5f 31 00 00 06 0c 08 00 01 45 0a 01 00 08 08 00  "_1.......E......"
>  f09a0  42 41 4e 4b 5f 32 00 00 07 13 09 00 01 80 01 80  "BANK_2.........."
>  f09b0  00 80 00 20 00 20 00 00 03 05 05 53 4c 4f 54 20  "... . .....SLOT "
>  f09c0  31 00 00 07 13 0a 00 01 81 01 00 01 00 01 20 00  "1............. ."
>  f09d0  20 00 00 03 05 05 53 4c 4f 54 20 31 00 00 08 09  " .....SLOT 1...."
>  f09e0  0b 00 01 16 02 00 00 49 44 45 31 00 4e 4f 4e 45  ".......IDE1.NONE"
>  f09f0  00 00 08 09 0c 00 01 16 02 00 00 49 44 45 32 00  "...........IDE2."
>  f0a00  4e 4f 4e 45 00 00 08 09 0d 00 01 17 02 00 00 46  "NONE...........F"
>  f0a10  4c 4f 50 50 59 00 4e 4f 4e 45 00 00 08 09 0e 00  "LOPPY.NONE......"
>  f0a20  01 00 02 08 08 4e 4f 4e 45 00 43 4f 4d 31 00 00  ".....NONE.COM1.."
>  f0a30  08 09 0f 00 01 00 02 08 08 4e 4f 4e 45 00 43 4f  ".........NONE.CO"
>  f0a40  4d 32 00 00 08 09 10 00 01 00 02 05 05 4e 4f 4e  "M2...........NON"
>  f0a50  45 00 4c 50 54 00 00 08 09 11 00 01 00 02 0f 0d  "E.LPT..........."
>  f0a60  4e 4f 4e 45 00 4b 65 79 62 6f 61 72 64 00 00 08  "NONE.Keyboard..."
>  f0a70  09 12 00 01 00 02 0f 0e 4e 4f 4e 45 00 50 53 2f  "........NONE.PS/"
>  f0a80  32 20 4d 6f 75 73 65 00 00 09 0d 13 00 01 06 05  "2 Mouse........."
>  f0a90  03 04 09 00 06 01 50 43 49 00 00 09 0d 14 00 01  "......PCI......."
>  f0aa0  06 05 04 04 0a 00 06 01 50 43 49 00 00 09 0d 15  "........PCI....."
>  f0ab0  00 01 06 05 03 04 0f 00 06 01 50 43 49 00 00 09  "..........PCI..."
>  f0ac0  0d 16 00 01 06 05 03 04 0c 00 06 01 50 43 49 00  "............PCI."
>  f0ad0  00 09 0d 17 00 01 06 05 03 04 08 00 06 01 50 43  "..............PC"
>  f0ae0  49 00 00 09 0d 18 00 01 0f 05 04 04 08 00 06 01  "I..............."
>  f0af0  41 47 50 00 00 08 09 19 00 01 00 02 12 10 4e 4f  "AGP...........NO"
>  f0b00  4e 45 00 55 53 42 31 00 00 08 09 1a 00 01 12 02  "NE.USB1........."
>  f0b10  00 10 55 53 42 32 00 4e 4f 4e 45 00 00 0d 16 1b  "..USB2.NONE....."
>  f0b20  00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  f0b30  00 00 01 6e 7c 55 53 7c 69 73 6f 38 38 35 39 2d  "...n|US|iso8859-"
>  f0b40  31 00 6e 7c 55 53 7c 69 73 6f 38 38 35 39 2d 31  "1.n|US|iso8859-1"
>  f0b50  00 72 7c 43 41 7c 69 73 6f 38 38 35 39 2d 31 00  ".r|CA|iso8859-1."
>  f0b60  61 7c 4a 50 7c 75 6e 69 63 6f 64 65 00 00 10 0f  "a|JP|unicode...."
>  f0b70  1c 00 03 03 03 00 00 08 00 ff ff 03 00 20 00 00  "............. .."
>  f0b80  11 15 1d 00 1c 00 ff ff 40 00 40 00 00 01 09 00  "........@.@....."
>  f0b90  01 02 01 80 00 42 41 4e 4b 5f 30 00 42 61 6e 6b  ".....BANK_0.Bank"
>  f0ba0  30 2f 31 00 00 11 15 1e 00 1c 00 ff ff 40 00 40  "0/1..........@.@"
>  f0bb0  00 00 01 09 00 01 02 01 80 00 42 41 4e 4b 5f 31  "..........BANK_1"
>  f0bc0  00 42 61 6e 6b 32 2f 33 00 00 11 15 1f 00 1c 00  ".Bank2/3........"
>  f0bd0  ff ff 40 00 40 00 00 01 09 00 01 02 01 80 00 42  "..@.@..........B"
>  f0be0  41 4e 4b 5f 32 00 42 61 6e 6b 34 2f 35 00 00 13  "ANK_2.Bank4/5..."
>  f0bf0  0f 20 00 00 00 00 00 ff 00 00 00 1c 00 01 20 00  ". ............ ."
>  f0c00  00 14 13 21 00 00 00 00 00 ff 00 00 00 1d 00 20  "...!........... "
>  f0c10  00 01 00 00 20 00 00 14 13 22 00 00 00 00 00 ff  ".... ...."......"
>  f0c20  00 00 00 1e 00 20 00 01 00 00 20 00 00 14 13 23  "..... .... ....#"
>  f0c30  00 00 00 00 00 ff 00 00 00 1f 00 20 00 01 00 00  "........... ...."
>  f0c40  20 00 00 20 0b 24 00 00 00 00 00 00 00 00 20 00  " .. .$........ ."
>  f0c50  00 7f 04 25 00 20 00 00  "...%. .."
>----- SMBIOS Structure Table end -----
>  type 0x00 [0x0000]: 00 13 00 00 01 02 00 f0 03 03 90 de cb 7f 00 00 00 00 37
>       str1: "Award Software International, Inc."
>       str2: "6.00 PG"
>       str3: "07/15/2003"
>  type 0x01 [0x0001]: 01 19 01 00 01 02 03 04 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 06
>       str3: "00000000"
>       str4: "00000000"
>  type 0x02 [0x0002]: 02 08 02 00 01 02 03 04
>       str1: "Gigabyte Technology Co., LTD"
>       str2: "7DXR"
>       str3: "1.x"
>       str4: "00000000"
>  type 0x03 [0x0003]: 03 0d 03 00 01 03 02 03 04 02 02 02 02
>       str3: "00000000"
>       str4: "00000000"
>  type 0x04 [0x0004]: 04 20 04 00 01 03 01 02 44 06 00 00 ff f9 83 01 03 91 85 00 78 05 35 05 41 04 09 00 0a 00 ff ff
>       str1: "Socket A"
>       str2: "AMD"
>       str3: "AMD Athlon(tm)"
>  type 0x05 [0x0005]: 05 16 05 00 03 04 03 03 09 0c 00 01 01 02 03 06 00 07 00 08 00 04
>  type 0x06 [0x0006]: 06 0c 06 00 01 01 0a 01 00 88 88 00
>       str1: "BANK_0"
>  type 0x06 [0x0007]: 06 0c 07 00 01 23 0a 01 00 88 88 00
>       str1: "BANK_1"
>  type 0x06 [0x0008]: 06 0c 08 00 01 45 0a 01 00 08 08 00
>       str1: "BANK_2"
>  type 0x07 [0x0009]: 07 13 09 00 01 80 01 80 00 80 00 20 00 20 00 00 03 05 05
>       str1: "SLOT 1"
>  type 0x07 [0x000a]: 07 13 0a 00 01 81 01 00 01 00 01 20 00 20 00 00 03 05 05
>       str1: "SLOT 1"
>  type 0x08 [0x000b]: 08 09 0b 00 01 16 02 00 00
>       str1: "IDE1"
>       str2: "NONE"
>  type 0x08 [0x000c]: 08 09 0c 00 01 16 02 00 00
>       str1: "IDE2"
>       str2: "NONE"
>  type 0x08 [0x000d]: 08 09 0d 00 01 17 02 00 00
>       str1: "FLOPPY"
>       str2: "NONE"
>  type 0x08 [0x000e]: 08 09 0e 00 01 00 02 08 08
>       str1: "NONE"
>       str2: "COM1"
>  type 0x08 [0x000f]: 08 09 0f 00 01 00 02 08 08
>       str1: "NONE"
>       str2: "COM2"
>  type 0x08 [0x0010]: 08 09 10 00 01 00 02 05 05
>       str1: "NONE"
>       str2: "LPT"
>  type 0x08 [0x0011]: 08 09 11 00 01 00 02 0f 0d
>       str1: "NONE"
>       str2: "Keyboard"
>  type 0x08 [0x0012]: 08 09 12 00 01 00 02 0f 0e
>       str1: "NONE"
>       str2: "PS/2 Mouse"
>  type 0x09 [0x0013]: 09 0d 13 00 01 06 05 03 04 09 00 06 01
>       str1: "PCI"
>  type 0x09 [0x0014]: 09 0d 14 00 01 06 05 04 04 0a 00 06 01
>       str1: "PCI"
>  type 0x09 [0x0015]: 09 0d 15 00 01 06 05 03 04 0f 00 06 01
>       str1: "PCI"
>  type 0x09 [0x0016]: 09 0d 16 00 01 06 05 03 04 0c 00 06 01
>       str1: "PCI"
>  type 0x09 [0x0017]: 09 0d 17 00 01 06 05 03 04 08 00 06 01
>       str1: "PCI"
>  type 0x09 [0x0018]: 09 0d 18 00 01 0f 05 04 04 08 00 06 01
>       str1: "AGP"
>  type 0x08 [0x0019]: 08 09 19 00 01 00 02 12 10
>       str1: "NONE"
>       str2: "USB1"
>  type 0x08 [0x001a]: 08 09 1a 00 01 12 02 00 10
>       str1: "USB2"
>       str2: "NONE"
>  type 0x0d [0x001b]: 0d 16 1b 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
>       str1: "n|US|iso8859-1"
>       str2: "n|US|iso8859-1"
>       str3: "r|CA|iso8859-1"
>       str4: "a|JP|unicode"
>  type 0x10 [0x001c]: 10 0f 1c 00 03 03 03 00 00 08 00 ff ff 03 00
>  type 0x11 [0x001d]: 11 15 1d 00 1c 00 ff ff 40 00 40 00 00 01 09 00 01 02 01 80 00
>       str1: "BANK_0"
>       str2: "Bank0/1"
>  type 0x11 [0x001e]: 11 15 1e 00 1c 00 ff ff 40 00 40 00 00 01 09 00 01 02 01 80 00
>       str1: "BANK_1"
>       str2: "Bank2/3"
>  type 0x11 [0x001f]: 11 15 1f 00 1c 00 ff ff 40 00 40 00 00 01 09 00 01 02 01 80 00
>       str1: "BANK_2"
>       str2: "Bank4/5"
>  type 0x13 [0x0020]: 13 0f 20 00 00 00 00 00 ff 00 00 00 1c 00 01
>  type 0x14 [0x0021]: 14 13 21 00 00 00 00 00 ff 00 00 00 1d 00 20 00 01 00 00
>  type 0x14 [0x0022]: 14 13 22 00 00 00 00 00 ff 00 00 00 1e 00 20 00 01 00 00
>  type 0x14 [0x0023]: 14 13 23 00 00 00 00 00 ff 00 00 00 1f 00 20 00 01 00 00
>  type 0x20 [0x0024]: 20 0b 24 00 00 00 00 00 00 00 00
>  type 0x7f [0x0025]: 7f 04 25 00
>  smbios: stopped at end tag
>>> bios.3: smp
>/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
>----- BIOS data 0x00400 - 0x004ff -----
>  400  f8 03 f8 02 00 00 00 00 78 03 00 00 00 00 c0 9f  "........x......."
>  410  27 44 00 7f 02 00 00 20 00 00 1e 00 1e 00 00 00  "'D..... ........"
>  420  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  440  1f 00 c0 00 00 00 00 00 00 7a 50 00 02 80 00 00  ".........zP....."
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  00 00 00 d4 03 29 30 f6 03 00 f0 00 2a b5 0c 00  ".....)0.....*..."
>  470  00 00 00 00 01 02 00 00 14 14 14 14 01 01 01 01  "................"
>  480  1e 00 3e 00 0b 08 00 60 69 11 0b c9 58 01 00 03  "..>....`i...X..."
>  490  07 00 00 00 00 00 10 12 00 00 00 00 00 00 00 00  "................"
>  4a0  00 00 00 60 0b 00 c0 00 e4 02 00 c0 10 10 00 10  "...`............"
>  4b0  00 00 00 11 d1 08 54 00 00 00 04 00 00 00 00 00  "......T........."
>  4c0  00 00 00 00 00 00 ff ff ff 00 00 00 00 00 00 00  "................"
>  4d0  00 10 00 00 00 00 00 00 dc 04 00 00 00 00 00 00  "................"
>  4e0  00 00 00 00 00 00 00 80 07 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03  "................"
>----- BIOS data end -----
>----- EBDA 0x9fc00 - 0x9ffff -----
>  9fc00  01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fca0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fce0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fda0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fde0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fea0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9feb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fec0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fed0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fee0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fef0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffa0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffe0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fff0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- EBDA end -----
>>> bios.4: vbe
>  klog: pci config type 1
>/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
>/dev/mem[0xc0000, 34816]: mmap(, 36864,,,, 0xc0000) ok
>/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
>  vbe: int 10h points to c000:0b60: 3d 10 4f 75 05 fb fc e9
>>> bios.4.1: vbe info
>>> bios.5: 32
>  bios32: valid SD header at 0xfb220 (size 0x10, rev 0), SD at 0xfb690
>>> sys.1: cpu
>  vmware check: 0
>>> misc.9: kernel log
>----- kernel log -----
>  <5>Linux version 2.6.13-rc6-git7-3-default (geeko@buildhost) (gcc version 4.0.2 20050812 (prerelease) (SUSE Linux)) #1 Mon Aug 15 18:28:43 UTC 2005
>  <6>BIOS-provided physical RAM map:
>  <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  <4> BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
>  <4> BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
>  <4> BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
>  <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>  <5>0MB HIGHMEM available.
>  <5>767MB LOWMEM available.
>  <7>On node 0 totalpages: 196592
>  <7>  DMA zone: 4096 pages, LIFO batch:1
>  <7>  Normal zone: 192496 pages, LIFO batch:31
>  <7>  HighMem zone: 0 pages, LIFO batch:1
>  <6>DMI 2.2 present.
>  <7>ACPI: RSDP (v000 GBT                                   ) @ 0x000f6360
>  <7>ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
>  <7>ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
>  <7>ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>  <6>ACPI: PM-Timer IO Port: 0x4008
>  <4>Allocating PCI resources starting at 30000000 (gap: 30000000:cfff0000)
>  <4>Built 1 zonelists
>  <5>Kernel command line: root=/dev/system/suse10root vga=0x31a selinux=0    resume=/dev/hda2  splash=silent
>  <6>bootsplash: silent mode.
>  <4>Local APIC disabled by BIOS -- you can enable it with "lapic"
>  <7>mapped APIC to ffffd000 (01603000)
>  <6>Initializing CPU#0
>  <4>PID hash table entries: 4096 (order: 12, 65536 bytes)
>  <4>Detected 1333.632 MHz processor.
>  <6>Using pmtmr for high-res timesource
>  <4>Console: colour dummy device 80x25
>  <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>  <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>  <6>Memory: 773568k/786368k available (2032k kernel code, 12200k reserved, 716k data, 204k init, 0k highmem)
>  <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>  <4>Calibrating delay using timer specific routine.. 2669.42 BogoMIPS (lpj=5338853)
>  <6>Security Framework v1.0.0 initialized
>  <6>SELinux:  Disabled at boot.
>  <4>Mount-cache hash table entries: 512
>  <7>CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
>  <7>CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
>  <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>  <6>CPU: L2 Cache: 256K (64 bytes/line)
>  <7>CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
>  <6>Intel machine check architecture supported.
>  <6>Intel machine check reporting enabled on CPU#0.
>  <6>mtrr: v2.0 (20020519)
>  <4>CPU: AMD Athlon(tm) processor stepping 04
>  <6>Enabling fast FPU save and restore... done.
>  <6>Checking 'hlt' instruction... OK.
>  <6>checking if image is initramfs... it is
>  <6>Freeing initrd memory: 1828k freed
>  <6>ACPI: Looking for DSDT in initrd... not found!
>  <4> not found!
>  <4> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
>  <4>Parsing all Control Methods:.......................................................................
>  <4>Table [DSDT](id F004) - 359 Objects with 35 Devices 71 Methods 22 Regions
>  <4>ACPI Namespace successfully loaded at root c042e660
>  <4>ACPI: setting ELCR to 0200 (from 0e20)
>  <4>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: PCI BIOS revision 2.10 entry at 0xfb6c0, last bus=1
>  <6>PCI: Using configuration type 1
>  <6>ACPI: Subsystem revision 20050408
>  <4>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
>  <4>evgpeblk-1024 [06] ev_create_gpe_block   : Found 4 Wake, Enabled 0 Runtime GPEs in this block
>  <4>Completing Region/Field/Buffer/Package initialization:..................................................
>  <4>Initialized 22/22 Regions 6/6 Fields 16/16 Buffers 6/11 Packages (368 nodes)
>  <4>Executing all Device _STA and_INI methods:......................................
>  <4>38 Devices found containing: 38 _STA, 1 _INI methods
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using PIC for interrupt routing
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <4>PCI: Probing PCI hardware (bus 00)
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>  <7>Boot video device is 0000:01:05.0
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
>  <6>Linux Plug and Play Support v0.97 (c) Adam Belay
>  <6>pnp: PnP ACPI init
>  <6>pnp: PnP ACPI: found 10 devices
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <6>PCI: Bridge: 0000:00:01.0
>  <6>  IO window: disabled.
>  <6>  MEM window: d6000000-d8ffffff
>  <6>  PREFETCH window: d4000000-d5ffffff
>  <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>  <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>  <5>apm: overridden by ACPI.
>  <6>audit: initializing netlink socket (disabled)
>  <4>audit(1124368946.900:1): initialized
>  <4>Total HugeTLB memory allocated, 0
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>PCI: Disabling Via external APIC routing
>  <6>vesafb: framebuffer at 0xd4000000, mapped to 0xf0880000, using 10240k, total 16384k
>  <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=5
>  <6>vesafb: protected mode interface info at c000:7920
>  <6>vesafb: scrolling: redraw
>  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>  <4>Console: switching to colour frame buffer device 160x64
>  <6>fb0: VESA VGA frame buffer device
>  <6>isapnp: Scanning for PnP cards...
>  <6>isapnp: No Plug & Play device found
>  <6>Real Time Clock Driver v1.12
>  <6>PNP: No PS/2 controller found. Probing ports directly.
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered
>  <6>Floppy drive(s): fd0 is 1.44M
>  <6>FDC 0 is a post-1991 82077
>  <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>  <6>loop: loaded (max 8 devices)
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: PC Speaker
>  <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 3.38
>  <6>NET: Registered protocol family 2
>  <4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>  <4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>  <4>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>  <6>TCP: Hash tables configured (established 131072 bind 65536)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <4>Using IPI Shortcut mode
>  <4>ACPI wakeup devices: 
>  <4>SLPB PCI0 USB0 USB1 UAR1 
>  <6>ACPI: (supports S0 S1 S4 S5)
>  <6>Freeing unused kernel memory: 204k freed
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <6>VP_IDE: IDE controller at PCI slot 0000:00:07.1
>  <4>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>  <6>PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
>  <6>VP_IDE: chipset revision 6
>  <6>VP_IDE: not 100% native mode: will probe irqs later
>  <6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
>  <6>    ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:pio
>  <6>    ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:DMA
>  <7>Probing IDE interface ide0...
>  <4>hda: MAXTOR 6L040J2, ATA DISK drive
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <7>Probing IDE interface ide1...
>  <4>hdc: MAXTOR 6L040J2, ATA DISK drive
>  <4>hdd: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
>  <4>ide1 at 0x170-0x177,0x376 on irq 15
>  <6>PDC20265: IDE controller at PCI slot 0000:00:10.0
>  <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>  <4>PCI: setting IRQ 11 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>  <6>PDC20265: chipset revision 2
>  <6>PDC20265: ROM enabled at 0x30000000
>  <6>PDC20265: 100% native mode on irq 11
>  <6>PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
>  <6>    ide2: BM-DMA at 0xc800-0xc807, BIOS settings: hde:pio, hdf:pio
>  <6>    ide3: BM-DMA at 0xc808-0xc80f, BIOS settings: hdg:pio, hdh:pio
>  <7>Probing IDE interface ide2...
>  <4>hde: PHILIPS CDRW1610A, ATAPI CD/DVD-ROM drive
>  <4>ide2 at 0xb800-0xb807,0xbc02 on irq 11
>  <7>Probing IDE interface ide3...
>  <6>ACPI: CPU0 (power states: C1[C1])
>  <6>ACPI: Processor [CPU0] (supports 2 throttling states)
>  <6>md: raid1 personality registered as nr 3
>  <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>  <6>hda: max request size: 128KiB
>  <6>hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63, UDMA(100)
>  <6>hda: cache flushes supported
>  <6> hda: hda1 hda2 hda3
>  <6>hdc: max request size: 128KiB
>  <6>hdc: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63, UDMA(100)
>  <6>hdc: cache flushes supported
>  <6> hdc: hdc1 hdc2 hdc3
>  <6>hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <6>hde: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
>  <4>Attempting manual resume
>  <3>swsusp: Suspend partition has wrong signature?
>  <6>md: Autodetecting RAID arrays.
>  <6>md: autorun ...
>  <6>md: considering hdc3 ...
>  <6>md:  adding hdc3 ...
>  <6>md:  adding hda3 ...
>  <6>md: created md0
>  <6>md: bind<hda3>
>  <6>md: bind<hdc3>
>  <6>md: running: <hdc3><hda3>
>  <6>raid1: raid set md0 active with 2 out of 2 mirrors
>  <6>md: ... autorun DONE.
>  <5>ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
>  <5>ReiserFS: dm-3: using ordered data mode
>  <4>reiserfs: using flush barriers
>  <5>ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>  <5>ReiserFS: dm-3: checking transaction log (dm-3)
>  <5>ReiserFS: dm-3: Using r5 hash to sort names
>  <6>md: Autodetecting RAID arrays.
>  <6>md: autorun ...
>  <6>md: ... autorun DONE.
>  <6>Adding 1044216k swap on /dev/hda2.  Priority:-1 extents:1
>  <6>Adding 747012k swap on /dev/hdc2.  Priority:-2 extents:1
>  <7>parport_pc: VIA 686A/8231 detected
>  <7>parport_pc: probing current configuration
>  <7>parport_pc: Current parallel port base: 0x378
>  <6>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>  <6>parport_pc: VIA parallel port: io=0x378, irq=7
>  <6>lp0: using parport0 (interrupt-driven).
>  <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>  <3>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
>  <3>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
>  <6>usbcore: registered new driver usbfs
>  <6>usbcore: registered new driver hub
>  <6>Linux agpgart interface v0.101 (c) Dave Jones
>  <6>agpgart: Detected AMD 761 chipset
>  <6>agpgart: AGP aperture is 64M @ 0xd0000000
>  <4>uhci_hcd: Unknown symbol usb_hcd_pci_suspend
>  <4>uhci_hcd: Unknown symbol usb_hcd_resume_root_hub
>  <4>uhci_hcd: Unknown symbol usb_hcd_pci_probe
>  <4>uhci_hcd: Unknown symbol usb_check_bandwidth
>  <4>uhci_hcd: Unknown symbol usb_disabled
>  <4>uhci_hcd: Unknown symbol usb_release_bandwidth
>  <4>uhci_hcd: Unknown symbol usb_claim_bandwidth
>  <4>uhci_hcd: Unknown symbol usb_hcd_pci_resume
>  <4>uhci_hcd: Unknown symbol usb_hcd_giveback_urb
>  <4>uhci_hcd: Unknown symbol usb_hcd_poll_rh_status
>  <4>uhci_hcd: Unknown symbol usb_hcd_pci_remove
>  <6>USB Universal Host Controller Interface driver v2.3
>  <4>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>  <6>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>  <6>uhci_hcd 0000:00:07.2: UHCI Host Controller
>  <6>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>  <6>uhci_hcd 0000:00:07.2: irq 11, io base 0x00009800
>  <6>hub 1-0:1.0: USB hub found
>  <6>hub 1-0:1.0: 2 ports detected
>  <4>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>  <6>ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>  <6>uhci_hcd 0000:00:07.3: UHCI Host Controller
>  <6>uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
>  <6>uhci_hcd 0000:00:07.3: irq 11, io base 0x00009c00
>  <6>hub 2-0:1.0: USB hub found
>  <6>hub 2-0:1.0: 2 ports detected
>  <6>usb 1-2: new low speed USB device using uhci_hcd and address 2
>  <6>Driver for 1-wire Dallas network protocol.
>  <6>matrox_w1 0000:01:05.0: Matrox G400 GPIO transport layer for 1-wire.
>  <7>orinoco 0.15rc2 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
>  <7>orinoco_plx 0.15rc2 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
>  <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>  <4>PCI: setting IRQ 10 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>  <7>orinoco_plx: Detected Orinoco/Prism2 PLX device at 0000:00:0a.0 irq:10, io addr:0xb000
>  <7>orinoco_plx: CIS: 01:03:00:00:FF:17:04:67:5A:08:FF:1D:05:01:67:5A:
>  <7>eth0: Hardware identity 800c:0000:0001:0000
>  <7>eth0: Station identity  001f:0006:0001:0003
>  <7>eth0: Firmware determined as Intersil 1.3.6
>  <7>eth0: Ad-hoc demo mode supported
>  <7>eth0: IEEE standard IBSS ad-hoc mode supported
>  <7>eth0: WEP supported, 104-bit key
>  <7>eth0: MAC address 00:09:5B:3B:B3:14
>  <7>eth0: Station name "Prism  I"
>  <7>eth0: ready
>  <6>Linux video capture interface: v1.00
>  <6>saa7130/34: v4l2 driver version 0.2.14 loaded
>  <4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>  <6>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>  <6>saa7134[0]: found at 0000:00:0d.0, rev: 1, irq: 11, latency: 32, mmio: 0xda020000
>  <6>saa7134[0]: subsystem: 153b:1142, board: Terratec Cinergy 400 TV [card=8,autodetected]
>  <6>saa7134[0]: board init: gpio is 50000
>  <3>input.c: calling hotplug without a hotplug agent defined
>  <4>saa7134[0]: registered input device for IR
>  <4>hostap: module not supported by Novell, setting U taint flag.
>  <7>hostap_crypt: registered algorithm 'NULL'
>  <4>hostap_plx: module not supported by Novell, setting U taint flag.
>  <6>hostap_plx: 0.3.9 - 2005-06-10 (Jouni Malinen <jkmaline@cc.hut.fi>)
>  <6>saa7134[0]: i2c eeprom 00: 3b 15 42 11 ff ff ff ff ff ff ff ff ff ff ff ff
>  <6>saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  <6>saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  <6>saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  <6> : chip found @ 0xc0 (saa7134[0])
>  <4> : All bytes are equal. It is not a TEA5767
>  <6>tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>  <6>saa7134[0]: registered device video0 [v4l2]
>  <6>saa7134[0]: registered device vbi0
>  <4>p80211: module not supported by Novell, setting U taint flag.
>  <4>prism2_plx: module not supported by Novell, setting U taint flag.
>  <4>prism2_plx: no version for "p80211netdev_rx" found: kernel tainted.
>  <6>usbcore: registered new driver hiddev
>  <3>input.c: calling hotplug without a hotplug agent defined
>  <6>input: USB HID v1.11 Keyboard [046a:0027] on usb-0000:00:07.2-2
>  <3>input.c: calling hotplug without a hotplug agent defined
>  <6>input,hiddev96: USB HID v1.11 Device [046a:0027] on usb-0000:00:07.2-2
>  <3>input.c: calling hotplug without a hotplug agent defined
>  <6>input: USB HID v1.11 Mouse [046a:0027] on usb-0000:00:07.2-2
>  <6>usbcore: registered new driver usbhid
>  <6>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>  <5>ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
>  <5>ReiserFS: dm-1: using journaled data mode
>  <4>reiserfs: using flush barriers
>  <5>ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>  <5>ReiserFS: dm-1: checking transaction log (dm-1)
>  <5>ReiserFS: dm-1: Using r5 hash to sort names
>  <5>ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
>  <5>ReiserFS: dm-2: using ordered data mode
>  <4>reiserfs: using flush barriers
>  <5>ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>  <5>ReiserFS: dm-2: checking transaction log (dm-2)
>  <5>ReiserFS: dm-2: Using r5 hash to sort names
>  <5>ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
>  <5>ReiserFS: dm-0: using ordered data mode
>  <4>reiserfs: using flush barriers
>  <5>ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>  <5>ReiserFS: dm-0: checking transaction log (dm-0)
>  <5>ReiserFS: dm-0: Using r5 hash to sort names
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644618]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644619]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644620]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644623]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644623]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644624]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644627]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644627]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644628]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644649]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644649]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644650]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644765]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644765]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <7>saa7134[0]/irq[10,644766]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
>  <4>saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
>  <3>input.c: calling hotplug without a hotplug agent defined
>  <4>hostap: module not supported by Novell, setting U taint flag.
>  <7>hostap_crypt: registered algorithm 'NULL'
>  <4>hostap_plx: module not supported by Novell, setting U taint flag.
>  <6>hostap_plx: 0.3.9 - 2005-06-10 (Jouni Malinen <jkmaline@cc.hut.fi>)
>  <6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>  <6>PLX9052 PCI/PCMCIA adapter: mem=0xda022000, plx_io=0xac00, irq=10, pccard_io=0xb000
>  <7>hostap_plx: CIS: 01 03 00 00 ff 17 ...
>  <7>hostap_plx: manfid=0x000b, 0x7300
>  <7>hostap_plx: cor_index=0x1 cor_offset=0x3e0
>  <7>Prism2/2.5 PC Card detected in PLX9052 adapter
>  <7>PLX_INTCSR=0x1041
>  <7>PLX_CNTRL=0x100066d2 (Serial EEPROM present=1)
>  <6>hostap_plx: Registered netdevice wifi0
>  <7>prism2_hw_init: initialized in 84 ms
>  <6>wifi0: NIC: id=0x800c v1.0.0
>  <6>wifi0: PRI: id=0x15 v1.0.7
>  <6>wifi0: STA: id=0x1f v1.3.6
>  <7>wifi0: defaulting to host-based encryption as a workaround for firmware bug in Host AP mode WEP
>  <7>wifi0: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS
>  <7>wifi0: registered netdevice wlan0
>  <7>prism2: eth0: operating mode changed 3 -> 2
>  <4>hostap_crypt_wep: module not supported by Novell, setting U taint flag.
>  <7>hostap_crypt: registered algorithm 'WEP'
>  <7>wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
>  <7>   retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS)
>  <7>   A1=00:00:00:00:00:00 A2=00:09:5b:3b:b3:14 A3=33:33:00:00:00:16 A4=00:00:00:00:00:00
>  <7>wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
>  <7>   retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS)
>  <7>   A1=00:00:00:00:00:00 A2=00:09:5b:3b:b3:14 A3=ff:ff:ff:ff:ff:ff A4=00:00:00:00:00:00
>  <7>wifi0: LinkStatus=1 (Connected)
>  <7>wifi0: LinkStatus: BSSID=00:01:e3:04:a7:8b
>  <7>eth0: no IPv6 routers present
>  <7>wifi0: LinkStatus=2 (Disconnected)
>  <7>wifi0: LinkStatus: BSSID=00:01:e3:04:a7:8b
>  <7>wifi0: LinkStatus=2 (Disconnected)
>  <7>wifi0: LinkStatus: BSSID=44:44:44:44:44:44
>  <7>wifi0: LinkStatus=2 (Disconnected)
>  <7>wifi0: LinkStatus: BSSID=44:44:44:44:44:44
>  <7>wifi0: LinkStatus=2 (Disconnected)
>  <7>wifi0: LinkStatus: BSSID=44:44:44:44:44:44
>  <4>ip_tables: (C) 2000-2002 Netfilter core team
>  <7>eth0: no IPv6 routers present
>  <7>hostap_plx: Doing reset via direct COR access.
>  <6>ACPI: PCI interrupt for device 0000:00:0a.0 disabled
>  <6>hostap_plx: Driver unloaded
>  <7>hostap_crypt: unregistered algorithm 'WEP'
>  <7>hostap_crypt: unregistered algorithm 'NULL' (deinit)
>  <7>orinoco 0.15rc2 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
>  <7>orinoco_plx 0.15rc2 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
>  <6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>  <7>orinoco_plx: Detected Orinoco/Prism2 PLX device at 0000:00:0a.0 irq:10, io addr:0xb000
>  <7>orinoco_plx: CIS: 01:03:00:00:B0:17:04:67:5A:08:FF:1D:05:01:67:5A:
>  <7>eth0: Hardware identity 800c:0000:0001:0000
>  <7>eth0: Station identity  001f:0006:0001:0003
>  <7>eth0: Firmware determined as Intersil 1.3.6
>  <7>eth0: Ad-hoc demo mode supported
>  <7>eth0: IEEE standard IBSS ad-hoc mode supported
>  <7>eth0: WEP supported, 104-bit key
>  <7>eth0: MAC address 00:09:5B:3B:B3:14
>  <7>eth0: Station name "Prism  I"
>  <7>eth0: ready
>  <6>eth0: New link status: Connected (0001)
>  <7>eth0: no IPv6 routers present
>  <7>parport_pc: VIA 686A/8231 detected
>  <7>parport_pc: probing current configuration
>  <7>parport_pc: Current parallel port base: 0x378
>  <6>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>  <6>parport_pc: VIA parallel port: io=0x378, irq=7
>  <6>lp0: using parport0 (interrupt-driven).
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <7>parport_pc: VIA 686A/8231 detected
>  <7>parport_pc: probing current configuration
>  <7>parport_pc: Current parallel port base: 0x378
>  <6>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>  <6>parport_pc: VIA parallel port: io=0x378, irq=7
>  <4>ppa: Version 2.07 (for Linux 2.4.x)
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport " -----
>----- return code: ? -----
>>> misc.1.3: read floppy
>  read_block0: open(/dev/fd0) failed
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  0170-0177 : ide1
>  01f0-01f7 : ide0
>  02f8-02ff : serial
>  0376-0376 : ide1
>  0378-037a : parport0
>  037b-037f : parport0
>  03c0-03df : vesafb
>  03f2-03f5 : floppy
>  03f6-03f6 : ide0
>  03f7-03f7 : floppy DIR
>  03f8-03ff : serial
>  0cf8-0cff : PCI conf1
>  4000-4003 : PM1a_EVT_BLK
>  4008-400b : PM_TMR
>  4010-4015 : ACPI CPU throttle
>  4020-4023 : GPE0_BLK
>  40f0-40f1 : PM1a_CNT_BLK
>  5000-500f : 0000:00:07.4
>    5000-5007 : viapro-smbus
>  6000-607f : 0000:00:07.4
>  9000-9003 : 0000:00:00.0
>  9400-940f : 0000:00:07.1
>    9400-9407 : ide0
>    9408-940f : ide1
>  9800-981f : 0000:00:07.2
>    9800-981f : uhci_hcd
>  9c00-9c1f : 0000:00:07.3
>    9c00-9c1f : uhci_hcd
>  ac00-ac7f : 0000:00:0a.0
>    ac00-ac7f : orinoco_plx
>  b000-b03f : 0000:00:0a.0
>    b000-b03f : orinoco_plx
>  b400-b43f : 0000:00:0e.0
>    b400-b43f : Ensoniq AudioPCI
>  b800-b807 : 0000:00:10.0
>    b800-b807 : ide2
>  bc00-bc03 : 0000:00:10.0
>    bc02-bc02 : ide2
>  c000-c007 : 0000:00:10.0
>  c400-c403 : 0000:00:10.0
>  c800-c83f : 0000:00:10.0
>    c800-c807 : ide2
>    c808-c80f : ide3
>    c810-c83f : PDC20265
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    0:    2105261          XT-PIC  timer
>    2:          0          XT-PIC  cascade
>    3:         16          XT-PIC  serial
>    4:         16          XT-PIC  serial
>    5:     367886          XT-PIC  mga@pci:0000:01:05.0
>    6:         14          XT-PIC  floppy
>    7:          0          XT-PIC  parport0
>    8:          3          XT-PIC  rtc
>    9:          1          XT-PIC  acpi
>   10:      68434          XT-PIC  Ensoniq AudioPCI, eth0
>   11:     152283          XT-PIC  ide2, uhci_hcd:usb1, uhci_hcd:usb2
>   14:      69663          XT-PIC  ide0
>   15:     122246          XT-PIC  ide1
>  NMI:          0 
>  LOC:          0 
>  ERR:          0
>  MIS:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   2: floppy
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: AuthenticAMD
>  cpu family	: 6
>  model		: 4
>  model name	: AMD Athlon(tm) processor
>  stepping	: 4
>  cpu MHz		: 1333.632
>  cache size	: 256 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 1
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
>  bogomips	: 2669.42
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x2fff0000
>  klog mem 0: 0x2f370000
>  klog mem 1: 0x0
>  klog mem:   0x2f370000
> -- <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> -- <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> -- <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> -- <4> BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
> -- <4> BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
> -- <4> BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
> -- <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> -- <5>0MB HIGHMEM available.
>  bios mem:   0x2ff8fc00
>  meminfo:    0x2f5a2000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0xbe4495e68742bf3a) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:07.1/ide1/1.1
>       ide-cdrom: /devices/pci0000:00/0000:00:10.0/ide2/2.0
>        ide-disk: /devices/pci0000:00/0000:00:07.1/ide0/0.0
>        ide-disk: /devices/pci0000:00/0000:00:07.1/ide1/1.0
>         ENS1371: /devices/pci0000:00/0000:00:0e.0
> Promise_Old_IDE: /devices/pci0000:00/0000:00:10.0
>         VIA_IDE: /devices/pci0000:00/0000:00:07.1
>   agpgart-amdk7: /devices/pci0000:00/0000:00:00.0
>       matrox_w1: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
>     orinoco_plx: /devices/pci0000:00/0000:00:0a.0
>      parport_pc: /devices/pci0000:00/0000:00:07.0
>        uhci_hcd: /devices/pci0000:00/0000:00:07.2
>        uhci_hcd: /devices/pci0000:00/0000:00:07.3
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>          serial: /devices/pnp0/00:07
>          serial: /devices/pnp0/00:08
>          system: /devices/pnp0/00:00
>          system: /devices/pnp0/00:01
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:07.3/usb2/2-0:1.0
>             hub: /module/usbcore
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0
>          usbhid: /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1
>          usbhid: /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2
>          usbhid: /module/usbhid
>             usb: /devices/pci0000:00/0000:00:07.2/usb1/1-2
>             usb: /devices/pci0000:00/0000:00:07.2/usb1
>             usb: /devices/pci0000:00/0000:00:07.3/usb2
>             usb: /module/usbcore
>       w1_driver: /devices/w1_bus_master1
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    class = 0x60000
>    vendor = 0x1022
>    device = 0x700e
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    res[0] = 0xd0000000 0xd3ffffff 0x1208
>    res[1] = 0xda021000 0xda021fff 0x1208
>    res[2] = 0x9000 0x9003 0x101
>    config[64]
>  pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0
>    class = 0x60400
>    vendor = 0x1022
>    device = 0x700f
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:07.0, bus_id = 0000:00:07.0, bus = pci
>    path = /devices/pci0000:00/0000:00:07.0
>    class = 0x60100
>    vendor = 0x1106
>    device = 0x686
>    subvendor = 0x1106
>    subdevice = 0x686
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:07.1, bus_id = 0000:00:07.1, bus = pci
>    path = /devices/pci0000:00/0000:00:07.1
>    class = 0x1018a
>    vendor = 0x1106
>    device = 0x571
>    subvendor = 0x1106
>    subdevice = 0x571
>    irq = 0
>    res[4] = 0x9400 0x940f 0x101
>    config[64]
>  pci device: name = 0000:00:07.2, bus_id = 0000:00:07.2, bus = pci
>    path = /devices/pci0000:00/0000:00:07.2
>    class = 0xc0300
>    vendor = 0x1106
>    device = 0x3038
>    subvendor = 0x925
>    subdevice = 0x1234
>    irq = 11
>    res[4] = 0x9800 0x981f 0x101
>    config[64]
>  pci device: name = 0000:00:07.3, bus_id = 0000:00:07.3, bus = pci
>    path = /devices/pci0000:00/0000:00:07.3
>    class = 0xc0300
>    vendor = 0x1106
>    device = 0x3038
>    subvendor = 0x925
>    subdevice = 0x1234
>    irq = 11
>    res[4] = 0x9c00 0x9c1f 0x101
>    config[64]
>  pci device: name = 0000:00:07.4, bus_id = 0000:00:07.4, bus = pci
>    path = /devices/pci0000:00/0000:00:07.4
>    class = 0xc0500
>    vendor = 0x1106
>    device = 0x3057
>    subvendor = 0x1106
>    subdevice = 0x3057
>    irq = 9
>    config[64]
>  pci device: name = 0000:00:0a.0, bus_id = 0000:00:0a.0, bus = pci
>    path = /devices/pci0000:00/0000:00:0a.0
>    class = 0x28000
>    vendor = 0x1385
>    device = 0x4100
>    subvendor = 0x1385
>    subdevice = 0x4100
>    irq = 10
>    res[1] = 0xac00 0xac7f 0x101
>    res[2] = 0xda022000 0xda022fff 0x200
>    res[3] = 0xb000 0xb03f 0x101
>    config[64]
>  pci device: name = 0000:00:0d.0, bus_id = 0000:00:0d.0, bus = pci
>    path = /devices/pci0000:00/0000:00:0d.0
>    class = 0x48000
>    vendor = 0x1131
>    device = 0x7134
>    subvendor = 0x153b
>    subdevice = 0x1142
>    irq = 11
>    res[0] = 0xda020000 0xda0203ff 0x200
>    config[64]
>  pci device: name = 0000:00:0e.0, bus_id = 0000:00:0e.0, bus = pci
>    path = /devices/pci0000:00/0000:00:0e.0
>    class = 0x40100
>    vendor = 0x1274
>    device = 0x5880
>    subvendor = 0x1274
>    subdevice = 0x2000
>    irq = 10
>    res[0] = 0xb400 0xb43f 0x101
>    config[64]
>  pci device: name = 0000:00:10.0, bus_id = 0000:00:10.0, bus = pci
>    path = /devices/pci0000:00/0000:00:10.0
>    class = 0x18000
>    vendor = 0x105a
>    device = 0xd30
>    subvendor = 0x105a
>    subdevice = 0x4d33
>    irq = 11
>    res[0] = 0xb800 0xb807 0x101
>    res[1] = 0xbc00 0xbc03 0x101
>    res[2] = 0xc000 0xc007 0x101
>    res[3] = 0xc400 0xc403 0x101
>    res[4] = 0xc800 0xc83f 0x101
>    res[5] = 0xda000000 0xda01ffff 0x200
>    res[6] = 0x30000000 0x3000ffff 0x7200
>    config[64]
>  pci device: name = 0000:01:05.0, bus_id = 0000:01:05.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0/0000:01:05.0
>    class = 0x30000
>    vendor = 0x102b
>    device = 0x525
>    subvendor = 0x102b
>    subdevice = 0x542
>    irq = 5
>    res[0] = 0xd4000000 0xd5ffffff 0x1208
>    res[1] = 0xd6000000 0xd6003fff 0x200
>    res[2] = 0xd7000000 0xd77fffff 0x200
>    res[6] = 0xd6020000 0xd603ffff 0x7202
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 1022:700e:0000:0000:13
>class 06, sub_class 00 prog_if 00, hdr 0, flags <agp>, irq 0
>  addr0 d0000000, size 04000000
>  addr1 da021000, size 00001000
>  addr2 00009000, size 00000004
>  00: 22 10 0e 70 06 00 10 22 13 00 00 06 00 20 00 00  ""..p..."..... .."
>  10: 08 00 00 d0 08 10 02 da 01 90 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 02 00  ".."
>
>bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 1022:700f:0000:0000:00
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 22 10 0f 70 07 01 20 02 00 00 04 06 00 20 01 00  ""..p.. ...... .."
>  10: 00 00 00 00 00 00 00 00 00 01 01 20 f1 01 20 22  "........... .. ""
>  20: 00 d6 f0 d8 00 d4 f0 d5 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e 00  "................"
>
>bus 00, slot 07, func 0, vend:dev:s_vend:s_dev:rev 1106:0686:1106:0686:40
>class 06, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 0
>  00: 06 11 86 06 87 00 10 02 40 00 01 06 00 00 80 00  "........@......."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 86 06  "................"
>  30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 01 00  ".."
>
>bus 00, slot 07, func 1, vend:dev:s_vend:s_dev:rev 1106:0571:1106:0571:06
>class 01, sub_class 01 prog_if 8a, hdr 0, flags <pm>, irq 0
>  addr4 00009400, size 00000010
>  00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00  "..q.......... .."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 94 00 00 00 00 00 00 00 00 00 00 06 11 71 05  "..............q."
>  30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 01 00  ".."
>
>bus 00, slot 07, func 2, vend:dev:s_vend:s_dev:rev 1106:3038:0925:1234:16
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <pm>, irq 11
>  addr4 00009800, size 00000020
>  00: 06 11 38 30 07 00 10 02 16 00 03 0c 08 20 00 00  "..80......... .."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 98 00 00 00 00 00 00 00 00 00 00 25 09 34 12  "............%.4."
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 04 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 01 00  ".."
>
>bus 00, slot 07, func 3, vend:dev:s_vend:s_dev:rev 1106:3038:0925:1234:16
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <pm>, irq 11
>  addr4 00009c00, size 00000020
>  00: 06 11 38 30 07 00 10 02 16 00 03 0c 08 20 00 00  "..80......... .."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 9c 00 00 00 00 00 00 00 00 00 00 25 09 34 12  "............%.4."
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 04 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 01 00  ".."
>
>bus 00, slot 07, func 4, vend:dev:s_vend:s_dev:rev 1106:3057:1106:3057:40
>class 0c, sub_class 05 prog_if 00, hdr 0, flags <pm>, irq 9
>  00: 06 11 57 30 00 00 90 02 40 00 05 0c 00 00 00 00  "..W0....@......."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 57 30  "..............W0"
>  30: 00 00 00 00 68 00 00 00 00 00 00 00 00 00 00 00  "....h..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 01 00  ".........."
>
>bus 00, slot 0a, func 0, vend:dev:s_vend:s_dev:rev 1385:4100:1385:4100:02
>class 02, sub_class 80 prog_if 00, hdr 0, flags <>, irq 10
>  addr1 0000ac00, size 00000080
>  addr2 da022000, size 00001000
>  addr3 0000b000, size 00000040
>  00: 85 13 00 41 03 00 80 02 02 00 80 02 08 00 00 00  "...A............"
>  10: 00 00 00 00 01 ac 00 00 00 20 02 da 01 b0 00 00  "......... ......"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 85 13 00 41  "...............A"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00  "................"
>
>bus 00, slot 0d, func 0, vend:dev:s_vend:s_dev:rev 1131:7134:153b:1142:01
>class 04, sub_class 80 prog_if 00, hdr 0, flags <pm>, irq 11
>  addr0 da020000, size 00000400
>  00: 31 11 34 71 06 00 90 82 01 00 80 04 00 20 00 00  "1.4q......... .."
>  10: 00 00 02 da 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 3b 15 42 11  "............;.B."
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 ff ff  "....@..........."
>  40: 01 00  ".."
>
>bus 00, slot 0e, func 0, vend:dev:s_vend:s_dev:rev 1274:5880:1274:2000:03
>class 04, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 10
>  addr0 0000b400, size 00000040
>  00: 74 12 80 58 05 00 10 04 03 00 01 04 00 20 00 00  "t..X......... .."
>  10: 01 b4 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 74 12 00 20  "............t.. "
>  30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 0c 80  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00  ".............."
>
>bus 00, slot 10, func 0, vend:dev:s_vend:s_dev:rev 105a:0d30:105a:4d33:02
>class 01, sub_class 80 prog_if 00, hdr 0, flags <pm>, irq 11
>  addr0 0000b800, size 00000008
>  addr1 0000bc00, size 00000004
>  addr2 0000c000, size 00000008
>  addr3 0000c400, size 00000004
>  addr4 0000c800, size 00000040
>  addr5 da000000, size 00020000
>  00: 5a 10 30 0d 07 00 10 02 02 00 80 01 00 20 00 00  "Z.0.......... .."
>  10: 01 b8 00 00 01 bc 00 00 01 c0 00 00 01 c4 00 00  "................"
>  20: 01 c8 00 00 00 00 00 da 00 00 00 00 5a 10 33 4d  "............Z.3M"
>  30: 01 00 00 30 58 00 00 00 00 00 00 00 0b 01 00 00  "...0X..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 01 00  ".........."
>
>bus 01, slot 05, func 0, vend:dev:s_vend:s_dev:rev 102b:0525:102b:0542:82
>class 03, sub_class 00 prog_if 00, hdr 0, flags <pm,agp>, irq 5
>  addr0 d4000000, size 02000000
>  addr1 d6000000, size 00004000
>  addr2 d7000000, size 00800000
>  00: 2b 10 25 05 07 00 90 02 82 00 00 03 08 40 00 00  "+.%..........@.."
>  10: 08 00 00 d4 00 00 00 d6 00 00 00 d7 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 2b 10 42 05  "............+.B."
>  30: 00 00 02 d6 dc 00 00 00 00 00 00 00 05 01 10 20  "............... "
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 f0 00 00  "................"
>  e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  f0: 02 00  ".."
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> monitor.1: ddc
>>> isapnp.1: pnp devices
>  pnp device: name = 00:00, bus_id = 00:00, bus = pnp
>    path = /devices/pnp0/00:00
>    id = PNP 0c01
>  pnp device: name = 00:01, bus_id = 00:01, bus = pnp
>    path = /devices/pnp0/00:01
>    id = PNP 0c02
>  pnp device: name = 00:02, bus_id = 00:02, bus = pnp
>    path = /devices/pnp0/00:02
>    id = PNP 0200
>  pnp device: name = 00:03, bus_id = 00:03, bus = pnp
>    path = /devices/pnp0/00:03
>    id = PNP 0b00
>  pnp device: name = 00:04, bus_id = 00:04, bus = pnp
>    path = /devices/pnp0/00:04
>    id = PNP 0800
>  pnp device: name = 00:05, bus_id = 00:05, bus = pnp
>    path = /devices/pnp0/00:05
>    id = PNP 0c04
>  pnp device: name = 00:06, bus_id = 00:06, bus = pnp
>    path = /devices/pnp0/00:06
>    id = PNP 0700
>  pnp device: name = 00:07, bus_id = 00:07, bus = pnp
>    path = /devices/pnp0/00:07
>    id = PNP 0501
>  pnp device: name = 00:08, bus_id = 00:08, bus = pnp
>    path = /devices/pnp0/00:08
>    id = PNP 0501
>  pnp device: name = 00:09, bus_id = 00:09, bus = pnp
>    path = /devices/pnp0/00:09
>    id = PNP 0400
>>> isa.1: isdn
>---------- ISA ISDN raw data ----------
>---------- ISA ISDN raw data end ----------
>>> isa.1.1: isdn
>-----  cardctl status -----
>-----  cardctl status end -----
>-----  cardctl ident -----
>-----  cardctl ident end -----
>>> serial.1: read info
>----- /proc/tty/driver/serial -----
>  0: uart:16550A port:000003F8 irq:4 tx:87 rx:0
>  1: uart:16550A port:000002F8 irq:3 tx:87 rx:0
>  2: uart:unknown port:000003E8 irq:4
>  3: uart:unknown port:000002E8 irq:3
>----- /proc/tty/driver/serial end -----
>----- serial info -----
>  uart 16550A, line 0, port 0x3f8, irq 4, baud 0
>  uart 16550A, line 1, port 0x2f8, irq 3, baud 0
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x0170 - 0x0177 (0x08) "ide1"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:1 0x02f8 - 0x02ff (0x08) "serial"
>i/o:1 0x0376 - 0x0376 (0x01) "ide1"
>i/o:1 0x0378 - 0x037a (0x03) "parport0"
>i/o:1 0x037b - 0x037f (0x05) "parport0"
>i/o:1 0x03c0 - 0x03df (0x20) "vesafb"
>i/o:1 0x03f2 - 0x03f5 (0x04) "floppy"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:1 0x03f7 - 0x03f7 (0x01) "floppy DIR"
>i/o:1 0x03f8 - 0x03ff (0x08) "serial"
>i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
>i/o:0 0x4000 - 0x4003 (0x04) "PM1a_EVT_BLK"
>i/o:0 0x4008 - 0x400b (0x04) "PM_TMR"
>i/o:0 0x4010 - 0x4015 (0x06) "ACPI CPU throttle"
>i/o:0 0x4020 - 0x4023 (0x04) "GPE0_BLK"
>i/o:0 0x40f0 - 0x40f1 (0x02) "PM1a_CNT_BLK"
>i/o:0 0x5000 - 0x500f (0x10) "0000:00:07.4"
>i/o:0 0x5000 - 0x5007 (0x08) "viapro-smbus"
>i/o:0 0x6000 - 0x607f (0x80) "0000:00:07.4"
>i/o:0 0x9000 - 0x9003 (0x04) "0000:00:00.0"
>i/o:0 0x9400 - 0x940f (0x10) "0000:00:07.1"
>i/o:1 0x9400 - 0x9407 (0x08) "ide0"
>i/o:1 0x9408 - 0x940f (0x08) "ide1"
>i/o:0 0x9800 - 0x981f (0x20) "0000:00:07.2"
>i/o:0 0x9800 - 0x981f (0x20) "uhci_hcd"
>i/o:0 0x9c00 - 0x9c1f (0x20) "0000:00:07.3"
>i/o:0 0x9c00 - 0x9c1f (0x20) "uhci_hcd"
>i/o:0 0xac00 - 0xac7f (0x80) "0000:00:0a.0"
>i/o:0 0xac00 - 0xac7f (0x80) "orinoco_plx"
>i/o:0 0xb000 - 0xb03f (0x40) "0000:00:0a.0"
>i/o:0 0xb000 - 0xb03f (0x40) "orinoco_plx"
>i/o:0 0xb400 - 0xb43f (0x40) "0000:00:0e.0"
>i/o:0 0xb400 - 0xb43f (0x40) "Ensoniq AudioPCI"
>i/o:0 0xb800 - 0xb807 (0x08) "0000:00:10.0"
>i/o:1 0xb800 - 0xb807 (0x08) "ide2"
>i/o:0 0xbc00 - 0xbc03 (0x04) "0000:00:10.0"
>i/o:1 0xbc02 - 0xbc02 (0x01) "ide2"
>i/o:0 0xc000 - 0xc007 (0x08) "0000:00:10.0"
>i/o:0 0xc400 - 0xc403 (0x04) "0000:00:10.0"
>i/o:0 0xc800 - 0xc83f (0x40) "0000:00:10.0"
>i/o:1 0xc800 - 0xc807 (0x08) "ide2"
>i/o:1 0xc808 - 0xc80f (0x08) "ide3"
>i/o:0 0xc810 - 0xc83f (0x30) "PDC20265"
>irq:1  0 (  2105261) "timer"
>irq:1  2 (        0) "cascade"
>irq:1  3 (       16) "serial"
>irq:1  4 (       16) "serial"
>irq:0  5 (   367886) "mga@pci:0000:01:05.0"
>irq:1  6 (       14) "floppy"
>irq:1  7 (        0) "parport0"
>irq:1  8 (        3) "rtc"
>irq:0  9 (        1) "acpi"
>irq:0 10 (    68434) "Ensoniq AudioPCI" "eth0"
>irq:1 11 (   152283) "ide2" "uhci_hcd:usb1" "uhci_hcd:usb2"
>irq:1 14 (    69663) "ide0"
>irq:1 15 (   122246) "ide1"
>dma:1 2 "floppy"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc" -----
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>/proc/sys/dev/parport/parport0/base-addr
>  888	1912
>/proc/sys/dev/parport/parport0/autoprobe
>----- parallel info end -----
>>> parallel.5: ppa mod
>----- exec: "/sbin/modprobe ppa " -----
>----- return code: ? -----
>>> parallel.6: zip read info
>----- exec: "/sbin/rmmod ppa" -----
>----- return code: ? -----
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>>> block.2: sysfs drivers
>----- sysfs driver list (id 0x39e9a0a397076376) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:07.1/ide1/1.1
>       ide-cdrom: /devices/pci0000:00/0000:00:10.0/ide2/2.0
>        ide-disk: /devices/pci0000:00/0000:00:07.1/ide0/0.0
>        ide-disk: /devices/pci0000:00/0000:00:07.1/ide1/1.0
>         ENS1371: /devices/pci0000:00/0000:00:0e.0
> Promise_Old_IDE: /devices/pci0000:00/0000:00:10.0
>         VIA_IDE: /devices/pci0000:00/0000:00:07.1
>   agpgart-amdk7: /devices/pci0000:00/0000:00:00.0
>       matrox_w1: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
>     orinoco_plx: /devices/pci0000:00/0000:00:0a.0
>      parport_pc: /devices/pci0000:00/0000:00:07.0
>        uhci_hcd: /devices/pci0000:00/0000:00:07.2
>        uhci_hcd: /devices/pci0000:00/0000:00:07.3
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>          serial: /devices/pnp0/00:07
>          serial: /devices/pnp0/00:08
>          system: /devices/pnp0/00:00
>          system: /devices/pnp0/00:01
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:07.3/usb2/2-0:1.0
>             hub: /module/usbcore
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0
>          usbhid: /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1
>          usbhid: /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2
>          usbhid: /module/usbhid
>             usb: /devices/pci0000:00/0000:00:07.2/usb1/1-2
>             usb: /devices/pci0000:00/0000:00:07.2/usb1
>             usb: /devices/pci0000:00/0000:00:07.3/usb2
>             usb: /module/usbcore
>       w1_driver: /devices/w1_bus_master1
>----- sysfs driver list end -----
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:		hde	hdd
>drive speed:		16	0
>drive # of slots:	1	1
>Can close tray:		1	1
>Can open tray:		1	1
>Can lock tray:		1	1
>Can change speed:	1	1
>Can select disk:	0	0
>Can read multisession:	1	1
>Can read MCN:		1	1
>Reports media changed:	1	1
>Can play audio:		1	1
>Can write CD-R:		1	0
>Can write CD-RW:	1	0
>Can read DVD:		0	1
>Can write DVD-R:	0	0
>Can write DVD-RAM:	0	0
>Can read MRW:		1	1
>Can write MRW:		1	1
>Can write RAM:		1	1
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     3     0   39088896 hda
>     3     1     208813 hda1
>     3     2    1044225 hda2
>     3     3   37833075 hda3
>    22     0   39088896 hdc
>    22     1     506016 hdc1
>    22     2     747022 hdc2
>    22     3   37833075 hdc3
>     9     0   37832960 md0
>   253     0    5242880 dm-0
>   253     1   10485760 dm-1
>   253     2   10485760 dm-2
>   253     3    5242880 dm-3
>----- /proc/partitions end -----
>disks:
>  hda
>  hdc
>partitions:
>  hda1
>  hda2
>  hda3
>  hdc1
>  hdc2
>  hdc3
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:07.1/ide0/0.0
>  ide: bus_id = 1.0 path = /devices/pci0000:00/0000:00:07.1/ide1/1.0
>  ide: bus_id = 1.1 path = /devices/pci0000:00/0000:00:07.1/ide1/1.1
>  ide: bus_id = 2.0 path = /devices/pci0000:00/0000:00:10.0/ide2/2.0
>  block: name = dm-0, path = /block/dm-0
>    dev = 253:0
>    range = 1
>  block: name = dm-1, path = /block/dm-1
>    dev = 253:1
>    range = 1
>  block: name = dm-2, path = /block/dm-2
>    dev = 253:2
>    range = 1
>  block: name = dm-3, path = /block/dm-3
>    dev = 253:3
>    range = 1
>  block: name = fd0, path = /block/fd0
>    dev = 2:0
>    range = 1
>    block device: bus = platform, bus_id = floppy.0 driver = unknown
>      path = /devices/platform/floppy.0
>  block: name = hda, path = /block/hda
>    dev = 3:0
>    range = 64
>    block device: bus = ide, bus_id = 0.0 driver = ide-disk
>      path = /devices/pci0000:00/0000:00:07.1/ide0/0.0
>  block: name = hdc, path = /block/hdc
>    dev = 22:0
>    range = 64
>    block device: bus = ide, bus_id = 1.0 driver = ide-disk
>      path = /devices/pci0000:00/0000:00:07.1/ide1/1.0
>  block: name = hdd, path = /block/hdd
>    dev = 22:64
>    range = 1
>    block device: bus = ide, bus_id = 1.1 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:07.1/ide1/1.1
>  block: name = hde, path = /block/hde
>    dev = 33:0
>    range = 1
>    block device: bus = ide, bus_id = 2.0 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:10.0/ide2/2.0
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = md0, path = /block/md0
>    dev = 9:0
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>>> scsi.1: scsi modules
>>> scsi.2: scsi tape
>>> scsi.3: scsi generic
>>> usb.1: sysfs drivers
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:07.2/usb1/1-2
>  usb dev: /devices/pci0000:00/0000:00:07.2/usb1
>  usb dev: /devices/pci0000:00/0000:00:07.3/usb2
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:07.2/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-rc6-git7-3-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:07.2"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 1-2:1.0, bus_id = 1-2:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0
>    bInterfaceNumber = 0
>    bInterfaceClass = 3
>    bInterfaceSubClass = 1
>    bInterfaceProtocol = 1
>    if: 1-2:1.0 @ /devices/pci0000:00/0000:00:07.2/usb1/1-2
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x046a
>    idProduct = 0x0027
>    bcdDevice = 0007
>    speed = "1.5"
>  usb device: name = 1-2:1.1, bus_id = 1-2:1.1, bus = usb
>    path = /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1
>    bInterfaceNumber = 1
>    bInterfaceClass = 3
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-2:1.1 @ /devices/pci0000:00/0000:00:07.2/usb1/1-2
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x046a
>    idProduct = 0x0027
>    bcdDevice = 0007
>    speed = "1.5"
>  usb device: name = 1-2:1.2, bus_id = 1-2:1.2, bus = usb
>    path = /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2
>    bInterfaceNumber = 2
>    bInterfaceClass = 3
>    bInterfaceSubClass = 1
>    bInterfaceProtocol = 2
>    if: 1-2:1.2 @ /devices/pci0000:00/0000:00:07.2/usb1/1-2
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x046a
>    idProduct = 0x0027
>    bcdDevice = 0007
>    speed = "1.5"
>  usb device: name = 1-2, bus_id = 1-2, bus = usb
>    path = /devices/pci0000:00/0000:00:07.2/usb1/1-2
>  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:07.3/usb2/2-0:1.0
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:07.3/usb2
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-rc6-git7-3-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:07.3"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:07.2/usb1
>  usb device: name = usb2, bus_id = usb2, bus = usb
>    path = /devices/pci0000:00/0000:00:07.3/usb2
>>> usb.3.1: joydev mod
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/event0
>    dev = 13:64
>  input: name = event2, path = /class/input/event2
>    dev = 13:66
>    input device: bus = usb, bus_id = 1-2:1.0 driver = usbhid
>      path = /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0
>  input: name = event3, path = /class/input/event3
>    dev = 13:67
>    input device: bus = usb, bus_id = 1-2:1.1 driver = usbhid
>      path = /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1
>  input: name = event4, path = /class/input/event4
>    dev = 13:68
>    input device: bus = usb, bus_id = 1-2:1.2 driver = usbhid
>      path = /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2
>  input: name = mice, path = /class/input/mice
>    dev = 13:63
>  input: name = mouse0, path = /class/input/mouse0
>    dev = 13:32
>    input device: bus = usb, bus_id = 1-2:1.2 driver = usbhid
>      path = /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2
>>> usb.3.4: lp
>>> usb.3.5: serial
>>> edd.1: edd mod
>>> edd.2: edd info
>edd: 0x80
>  size: 78177792
>  chs default: 77557/16/63
>  chs legacy: 1024/255/63
>  caps: fixed edd 
>  attached: #0 
>edd: 0x81
>  size: 78177792
>  chs default: 77557/16/63
>  chs legacy: 1024/255/63
>  caps: fixed edd 
>  attached: #0 
>>> braille.1.1: alva
>>> braille.2.1: alva open
>>> braille.3.1: alva init ok
>>> braille.4.1: alva read data
>alva.100@/dev/ttyS0[0]: 
>>> braille.5.1: alva read done
>>> braille.1.1: fhp_old
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: fhp_el
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: ht
>>> braille.2.1: ht open
>>> braille.3.1: ht init ok
>>> braille.4.1: ht write ok
>>> braille.5.1: ht read done
>ht@/dev/ttyS0[1]: 00  "."
>no ht display: 0x00
>>> braille.1.1: baum
>>> braille.2.1: baum open
>>> braille.3.1: baum write ok
>>> braille.4.1: baum read done
>baum@/dev/ttyS0[0]: 
>>> braille.1.2: alva
>>> braille.2.2: alva open
>>> braille.3.2: alva init ok
>>> braille.4.2: alva read data
>alva.100@/dev/ttyS1[0]: 
>>> braille.5.2: alva read done
>>> braille.1.2: fhp_old
>>> braille.2.2: fhp open
>>> braille.3.2: fhp init ok
>>> braille.4.2: fhp write ok
>>> braille.5.2: fhp read done
>fhp@/dev/ttyS1[0]: 
>no fhp display: 0x00
>>> braille.1.2: fhp_el
>>> braille.2.2: fhp open
>>> braille.3.2: fhp init ok
>>> braille.4.2: fhp write ok
>>> braille.5.2: fhp read done
>fhp@/dev/ttyS1[0]: 
>no fhp display: 0x00
>>> braille.1.2: ht
>>> braille.2.2: ht open
>>> braille.3.2: ht init ok
>>> braille.4.2: ht write ok
>>> braille.5.2: ht read done
>ht@/dev/ttyS1[1]: 00  "."
>no ht display: 0x00
>>> braille.1.2: baum
>>> braille.2.2: baum open
>>> braille.3.2: baum write ok
>>> braille.4.2: baum read done
>baum@/dev/ttyS1[0]: 
>>> modem.1: serial
>******  started child process 14642 (15s/120s)  ******
>>> modem.2: init
>>> modem.3.1: at test
>>> modem.3.2: at test
>>> modem.3.3: at test
>>> modem.3.4: at test
>>> modem.4: init string
>>> modem.5: speed
>>> modem.5: pnp id
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>
>/dev/ttyS1
>  not a modem
>----- serial modems end -----
>******  stopped child process 14642 (121s)  ******
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>
>/dev/ttyS1
>  not a modem
>----- serial modems end -----
>>> mouse.2: serial
>******  started child process 14643 (20s/20s)  ******
>----- serial mice -----
>/dev/ttyS0
>
>/dev/ttyS1
>----- serial mice end -----
>******  stopped child process 14643 (19s)  ******
>----- serial mice -----
>/dev/ttyS0
>
>/dev/ttyS1
>----- serial mice end -----
>>> input.1: joydev mod
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  H: Handlers=kbd event0 
>  B: EV=40001 
>  B: SND=6 
>  
>  I: Bus=0003 Vendor=046a Product=0027 Version=0007
>  N: Name="046a:0027"
>  P: Phys=usb-0000:00:07.2-2/input0
>  H: Handlers=kbd event2 
>  B: EV=120003 
>  B: KEY=10000 7 ff800000 7ff f2beffdf f3cfffff ffffffff fffffffe 
>  B: LED=1f 
>  
>  I: Bus=0003 Vendor=046a Product=0027 Version=0007
>  N: Name="046a:0027"
>  P: Phys=usb-0000:00:07.2-2/input1
>  H: Handlers=kbd event3 
>  B: EV=f 
>  B: KEY=1 0 38000 39fa d841d7a9 9e0000 0 0 0 
>  B: REL=40 
>  B: ABS=ffffff01 0 
>  
>  I: Bus=0003 Vendor=046a Product=0027 Version=0007
>  N: Name="046a:0027"
>  P: Phys=usb-0000:00:07.2-2/input2
>  H: Handlers=mouse0 event4 
>  B: EV=7 
>  B: KEY=1f0000 0 0 0 0 0 0 0 0 
>  B: REL=103 
>  
>----- /proc/bus/input/devices end -----
>bus = 16, name = PC Speaker
>  handlers = kbd event0
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 3, name = 046a:0027
>  handlers = kbd event2
>  key = 0001000000000007ff800000000007fff2beffdff3cffffffffffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 3, name = 046a:0027
>  handlers = kbd event3
>  key = 000000010000000000038000000039fad841d7a9009e0000000000000000000000000000
>  rel = 00000040
>  mouse buttons = 0
>  mouse wheels = 1
>bus = 3, name = 046a:0027
>  handlers = mouse0 event4
>  key = 001f00000000000000000000000000000000000000000000000000000000000000000000
>  rel = 00000103
>  mouse buttons = 5
>  mouse wheels = 1
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: AuthenticAMD
>  cpu family	: 6
>  model		: 4
>  model name	: AMD Athlon(tm) processor
>  stepping	: 4
>  cpu MHz		: 1333.632
>  cache size	: 256 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 1
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
>  bogomips	: 2669.42
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>/dev/console: major 4, minor 7
>>> fb.1: read info
>fb: size 1280 x 1024
>fb: timing 131.10 MHz, 80.33 kHz, 76.65 Hz
>>> net.1: get network data
>  net interface: name = eth0, classname = net, path = /class/net/eth0
>    type = 1
>    hw_addr = 00:09:5b:3b:b3:14
>    net device: path = /devices/pci0000:00/0000:00:0a.0
>    ethtool driver: orinoco
>    ethtool    bus: 0000:00:0a.0
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  net interface: name = sit0, classname = net, path = /class/net/sit0
>    type = 776
>    hw_addr = 00:00:00:00
>  eth0: ethtool link state: 1
>  lo: ethtool link state: 1
>  sit0: GLINK ethtool error: Invalid argument
>>> pppoe.1: looking for pppoe
>>> pppoe.2: discovery
>Attempt number 1
>eth0: Sending PADI packet
>Timeout waiting for PADO packets
>Attempt number 2
>eth0: Sending PADI packet
>Timeout waiting for PADO packets
>>> 38.1: detecting wlan features
>*** device eth0 is wireless ***
>>> 38.2: assign udi
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4.1: /dev/hda
>  read_block0: 512 bytes (5s, 0us)
>>> int.4.2: /dev/hdc
>  read_block0: 512 bytes (5s, 0us)
>>> int.4: floppy
>>> int.5: bios
>  bios ctrl 0: 18
>>> int.6: mouse
>>> int.15: system info
>  system type:
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P:/class/input/event0
>  N:input/event0
>  M:13:64
>  P:/class/input/mice
>  N:input/mice
>  M:13:63
>  P:/class/misc/device-mapper
>  N:device-mapper
>  S:mapper/control
>  M:10:63
>  P:/block/hdd
>  N:hdd
>  S:dvd
>  S:disk/by-path/pci-0000:00:07.1-ide-1:1
>  M:22:64
>  E:ID_TYPE=cd
>  E:ID_MODEL=LG_DVD-ROM_DRD-8160B
>  E:ID_SERIAL=
>  E:ID_REVISION=1.01
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:07.1-ide-1:1
>  P:/block/hde
>  N:hde
>  S:cdrecorder
>  S:cdrom
>  S:disk/by-id/ata-PHILIPS_CDRW1610A_5VO2206DL02263
>  S:disk/by-path/pci-0000:00:10.0-ide-0:0
>  M:33:0
>  E:ID_TYPE=cd
>  E:ID_MODEL=PHILIPS_CDRW1610A
>  E:ID_SERIAL=5VO2206DL02263
>  E:ID_REVISION=0.010000
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:10.0-ide-0:0
>  P:/block/dm-3
>  N:mapper/system-suse10root
>  S:disk/by-uuid/be4bd93f-640e-4f0d-8690-a4f395c1b1a8
>  M:253:3
>  E:ID_FS_USAGE=filesystem
>  E:ID_FS_TYPE=reiserfs
>  E:ID_FS_VERSION=3.6
>  E:ID_FS_UUID=be4bd93f-640e-4f0d-8690-a4f395c1b1a8
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/md0
>  N:md0
>  M:9:0
>  E:ID_FS_USAGE=raid
>  E:ID_FS_TYPE=LVM2_member
>  E:ID_FS_VERSION=LVM2
>  E:ID_FS_UUID=
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/dm-0
>  N:mapper/system-suse93root
>  S:disk/by-uuid/9eb5639f-971b-438d-88f6-39ee9f702ace
>  M:253:0
>  E:ID_FS_USAGE=filesystem
>  E:ID_FS_TYPE=reiserfs
>  E:ID_FS_VERSION=3.6
>  E:ID_FS_UUID=9eb5639f-971b-438d-88f6-39ee9f702ace
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/dm-1
>  N:mapper/system-home
>  S:disk/by-uuid/66e61ee6-b544-4100-b3c6-fc116ad7c675
>  M:253:1
>  E:ID_FS_USAGE=filesystem
>  E:ID_FS_TYPE=reiserfs
>  E:ID_FS_VERSION=3.6
>  E:ID_FS_UUID=66e61ee6-b544-4100-b3c6-fc116ad7c675
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/hda
>  N:hda
>  S:disk/by-id/ata-MAXTOR_6L040J2_662243204380
>  S:disk/by-path/pci-0000:00:07.1-ide-0:0
>  M:3:0
>  E:ID_TYPE=disk
>  E:ID_MODEL=MAXTOR_6L040J2
>  E:ID_SERIAL=662243204380
>  E:ID_REVISION=AR1.0500
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:07.1-ide-0:0
>  P:/block/hdc
>  N:hdc
>  S:disk/by-id/ata-MAXTOR_6L040J2_662209944312
>  S:disk/by-path/pci-0000:00:07.1-ide-1:0
>  M:22:0
>  E:ID_TYPE=disk
>  E:ID_MODEL=MAXTOR_6L040J2
>  E:ID_SERIAL=662209944312
>  E:ID_REVISION=AR1.0500
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:07.1-ide-1:0
>  P:/block/hda/hda3
>  N:hda3
>  S:disk/by-id/ata-MAXTOR_6L040J2_662243204380-part3
>  S:disk/by-path/pci-0000:00:07.1-ide-0:0-part3
>  S:disk/by-uuid/4dbeb633-0dd3-9faf-85bb-064e0840ee28
>  M:3:3
>  E:ID_TYPE=disk
>  E:ID_MODEL=MAXTOR_6L040J2
>  E:ID_SERIAL=662243204380
>  E:ID_REVISION=AR1.0500
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:07.1-ide-0:0
>  E:ID_FS_USAGE=raid
>  E:ID_FS_TYPE=linux_raid_member
>  E:ID_FS_VERSION=0.90.1
>  E:ID_FS_UUID=4dbeb633-0dd3-9faf-85bb-064e0840ee28
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/dm-2
>  N:mapper/system-space
>  S:disk/by-uuid/7c23060e-97d3-4f70-b157-ebffc53fc46d
>  M:253:2
>  E:ID_FS_USAGE=filesystem
>  E:ID_FS_TYPE=reiserfs
>  E:ID_FS_VERSION=3.6
>  E:ID_FS_UUID=7c23060e-97d3-4f70-b157-ebffc53fc46d
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/hdc/hdc3
>  N:hdc3
>  S:disk/by-id/ata-MAXTOR_6L040J2_662209944312-part3
>  S:disk/by-path/pci-0000:00:07.1-ide-1:0-part3
>  S:disk/by-uuid/4dbeb633-0dd3-9faf-85bb-064e0840ee28
>  M:22:3
>  E:ID_TYPE=disk
>  E:ID_MODEL=MAXTOR_6L040J2
>  E:ID_SERIAL=662209944312
>  E:ID_REVISION=AR1.0500
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:07.1-ide-1:0
>  E:ID_FS_USAGE=raid
>  E:ID_FS_TYPE=linux_raid_member
>  E:ID_FS_VERSION=0.90.1
>  E:ID_FS_UUID=4dbeb633-0dd3-9faf-85bb-064e0840ee28
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/hda/hda1
>  N:hda1
>  S:disk/by-id/ata-MAXTOR_6L040J2_662243204380-part1
>  S:disk/by-path/pci-0000:00:07.1-ide-0:0-part1
>  S:disk/by-uuid/31cd9186-2a0d-4428-9ef5-a47024bab0ec
>  M:3:1
>  E:ID_TYPE=disk
>  E:ID_MODEL=MAXTOR_6L040J2
>  E:ID_SERIAL=662243204380
>  E:ID_REVISION=AR1.0500
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:07.1-ide-0:0
>  E:ID_FS_USAGE=filesystem
>  E:ID_FS_TYPE=ext2
>  E:ID_FS_VERSION=
>  E:ID_FS_UUID=31cd9186-2a0d-4428-9ef5-a47024bab0ec
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/hda/hda2
>  N:hda2
>  S:disk/by-id/ata-MAXTOR_6L040J2_662243204380-part2
>  S:disk/by-path/pci-0000:00:07.1-ide-0:0-part2
>  M:3:2
>  E:ID_TYPE=disk
>  E:ID_MODEL=MAXTOR_6L040J2
>  E:ID_SERIAL=662243204380
>  E:ID_REVISION=AR1.0500
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:07.1-ide-0:0
>  E:ID_FS_USAGE=other
>  E:ID_FS_TYPE=swap
>  E:ID_FS_VERSION=2
>  E:ID_FS_UUID=
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/hdc/hdc1
>  N:hdc1
>  S:disk/by-id/ata-MAXTOR_6L040J2_662209944312-part1
>  S:disk/by-path/pci-0000:00:07.1-ide-1:0-part1
>  M:22:1
>  E:ID_TYPE=disk
>  E:ID_MODEL=MAXTOR_6L040J2
>  E:ID_SERIAL=662209944312
>  E:ID_REVISION=AR1.0500
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:07.1-ide-1:0
>  E:ID_FS_USAGE=raid
>  E:ID_FS_TYPE=LVM2_member
>  E:ID_FS_VERSION=LVM2
>  E:ID_FS_UUID=
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/class/usb_device/usbdev2.1
>  N:usbdev2.1
>  S:bus/usb/2/1
>  M:189:128
>  P:/block/hdc/hdc2
>  N:hdc2
>  S:disk/by-id/ata-MAXTOR_6L040J2_662209944312-part2
>  S:disk/by-path/pci-0000:00:07.1-ide-1:0-part2
>  M:22:2
>  E:ID_TYPE=disk
>  E:ID_MODEL=MAXTOR_6L040J2
>  E:ID_SERIAL=662209944312
>  E:ID_REVISION=AR1.0500
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:07.1-ide-1:0
>  E:ID_FS_USAGE=other
>  E:ID_FS_TYPE=swap
>  E:ID_FS_VERSION=2
>  E:ID_FS_UUID=
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/class/usb_device/usbdev1.1
>  N:usbdev1.1
>  S:bus/usb/1/1
>  M:189:0
>  P:/class/usb_device/usbdev1.2
>  N:usbdev1.2
>  S:bus/usb/1/2
>  M:189:1
>  P:/class/input/event2
>  N:input/event2
>  M:13:66
>  P:/class/input/event3
>  N:input/event3
>  M:13:67
>  P:/class/input/mouse0
>  N:input/mouse0
>  M:13:32
>  P:/class/input/event4
>  N:input/event4
>  M:13:68
>  P:/class/sound/timer
>  N:snd/timer
>  M:116:33
>  P:/class/sound/midiC0D0
>  N:snd/midiC0D0
>  M:116:8
>  P:/class/sound/pcmC0D1p
>  N:snd/pcmC0D1p
>  M:116:17
>  P:/class/sound/pcmC0D0p
>  N:snd/pcmC0D0p
>  M:116:16
>  P:/class/sound/pcmC0D0c
>  N:snd/pcmC0D0c
>  M:116:24
>  P:/class/sound/controlC0
>  N:snd/controlC0
>  M:116:0
>  P:/class/sound/seq
>  N:snd/seq
>  M:116:1
>-----  udevinfo end -----
>/class/input/event0
>  name: input/event0
>/class/input/mice
>  name: input/mice
>/class/misc/device-mapper
>  name: device-mapper
>  links: mapper/control
>/block/hdd
>  name: hdd
>  links: dvd, disk/by-path/pci-0000:00:07.1-ide-1:1
>/block/hde
>  name: hde
>  links: cdrecorder, cdrom, disk/by-id/ata-PHILIPS_CDRW1610A_5VO2206DL02263, disk/by-path/pci-0000:00:10.0-ide-0:0
>/block/dm-3
>  name: mapper/system-suse10root
>  links: disk/by-uuid/be4bd93f-640e-4f0d-8690-a4f395c1b1a8
>/block/md0
>  name: md0
>/block/dm-0
>  name: mapper/system-suse93root
>  links: disk/by-uuid/9eb5639f-971b-438d-88f6-39ee9f702ace
>/block/dm-1
>  name: mapper/system-home
>  links: disk/by-uuid/66e61ee6-b544-4100-b3c6-fc116ad7c675
>/block/hda
>  name: hda
>  links: disk/by-id/ata-MAXTOR_6L040J2_662243204380, disk/by-path/pci-0000:00:07.1-ide-0:0
>/block/hdc
>  name: hdc
>  links: disk/by-id/ata-MAXTOR_6L040J2_662209944312, disk/by-path/pci-0000:00:07.1-ide-1:0
>/block/hda/hda3
>  name: hda3
>  links: disk/by-id/ata-MAXTOR_6L040J2_662243204380-part3, disk/by-path/pci-0000:00:07.1-ide-0:0-part3, disk/by-uuid/4dbeb633-0dd3-9faf-85bb-064e0840ee28
>/block/dm-2
>  name: mapper/system-space
>  links: disk/by-uuid/7c23060e-97d3-4f70-b157-ebffc53fc46d
>/block/hdc/hdc3
>  name: hdc3
>  links: disk/by-id/ata-MAXTOR_6L040J2_662209944312-part3, disk/by-path/pci-0000:00:07.1-ide-1:0-part3, disk/by-uuid/4dbeb633-0dd3-9faf-85bb-064e0840ee28
>/block/hda/hda1
>  name: hda1
>  links: disk/by-id/ata-MAXTOR_6L040J2_662243204380-part1, disk/by-path/pci-0000:00:07.1-ide-0:0-part1, disk/by-uuid/31cd9186-2a0d-4428-9ef5-a47024bab0ec
>/block/hda/hda2
>  name: hda2
>  links: disk/by-id/ata-MAXTOR_6L040J2_662243204380-part2, disk/by-path/pci-0000:00:07.1-ide-0:0-part2
>/block/hdc/hdc1
>  name: hdc1
>  links: disk/by-id/ata-MAXTOR_6L040J2_662209944312-part1, disk/by-path/pci-0000:00:07.1-ide-1:0-part1
>/class/usb_device/usbdev2.1
>  name: usbdev2.1
>  links: bus/usb/2/1
>/block/hdc/hdc2
>  name: hdc2
>  links: disk/by-id/ata-MAXTOR_6L040J2_662209944312-part2, disk/by-path/pci-0000:00:07.1-ide-1:0-part2
>/class/usb_device/usbdev1.1
>  name: usbdev1.1
>  links: bus/usb/1/1
>/class/usb_device/usbdev1.2
>  name: usbdev1.2
>  links: bus/usb/1/2
>/class/input/event2
>  name: input/event2
>/class/input/event3
>  name: input/event3
>/class/input/mouse0
>  name: input/mouse0
>/class/input/event4
>  name: input/event4
>/class/sound/timer
>  name: snd/timer
>/class/sound/midiC0D0
>  name: snd/midiC0D0
>/class/sound/pcmC0D1p
>  name: snd/pcmC0D1p
>/class/sound/pcmC0D0p
>  name: snd/pcmC0D0p
>/class/sound/pcmC0D0c
>  name: snd/pcmC0D0c
>/class/sound/controlC0
>  name: snd/controlC0
>/class/sound/seq
>  name: snd/seq
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.3wRL2_g4d2B (failed)
>  old prop read: rdCR.3wRL2_g4d2B (failed)
>  prop read: /org/freedesktop/Hal/devices/computer_storage (failed)
>  prop read: sPPV.oZ89vuho4Y3 (failed)
>  old prop read: sPPV.oZ89vuho4Y3 (failed)
>  prop read: rdCR.lZF+r4EgHp4 (failed)
>  old prop read: rdCR.lZF+r4EgHp4 (failed)
>  prop read: rdCR.n_7QNeEnh23 (failed)
>  old prop read: rdCR.n_7QNeEnh23 (failed)
>  prop read: rdCR.EMpH5pjcahD (failed)
>  old prop read: rdCR.EMpH5pjcahD (failed)
>  prop read: rdCR.f5u1ucRm+H9 (failed)
>  old prop read: rdCR.f5u1ucRm+H9 (failed)
>  prop read: rdCR.8uRK7LxiIA2 (failed)
>  old prop read: rdCR.8uRK7LxiIA2 (failed)
>  prop read: rdCR.AJKleuxpiP0 (failed)
>  old prop read: rdCR.AJKleuxpiP0 (failed)
>  prop read: rdCR.hWmSPAStPX7 (failed)
>  old prop read: rdCR.hWmSPAStPX7 (failed)
>  prop read: rdCR.9N+EecqykME (failed)
>  old prop read: rdCR.9N+EecqykME (failed)
>  prop read: YMnp.ecK7NLYWZ5D (failed)
>  old prop read: YMnp.ecK7NLYWZ5D (failed)
>  prop read: rdCR.DziBbWO85o5 (failed)
>  old prop read: rdCR.DziBbWO85o5 (failed)
>  prop read: rdCR.CxwsZFjVASF (failed)
>  old prop read: rdCR.CxwsZFjVASF (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1022_700e (failed)
>  prop read: qLht.hr3dq8CToGA (failed)
>  old prop read: qLht.hr3dq8CToGA (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1022_700f (failed)
>  prop read: vSkL.TWicxR2Z3DA (failed)
>  old prop read: vSkL.TWicxR2Z3DA (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_686 (failed)
>  prop read: M71A.X_nvyU4S8BA (failed)
>  old prop read: M71A.X_nvyU4S8BA (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_571 (failed)
>  prop read: ESW+.mcsZ0a690T4 (failed)
>  old prop read: ESW+.mcsZ0a690T4 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3038_0 (failed)
>  prop read: 5n+q.S1sxJsLNxW6 (failed)
>  old prop read: 5n+q.S1sxJsLNxW6 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3038 (failed)
>  prop read: y5Vg.S1sxJsLNxW6 (failed)
>  old prop read: y5Vg.S1sxJsLNxW6 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3057 (failed)
>  prop read: qQ_V.1Nhh3zpLWIB (failed)
>  old prop read: qQ_V.1Nhh3zpLWIB (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1385_4100 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1131_7134 (failed)
>  prop read: qnJ_.AIy4B8S35H6 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1274_5880 (failed)
>  prop read: vuMS.msFc4tvhLd7 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_105a_d30 (failed)
>  prop read: 37TO.8WdZzOai8cD (failed)
>  old prop read: 37TO.8WdZzOai8cD (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_102b_525 (failed)
>  prop read: ul7N.WzZVSRCzUm3 (failed)
>  old prop read: ul7N.WzZVSRCzUm3 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c01 (failed)
>  prop read: z9pp.gNN83gfynbD (failed)
>  old prop read: z9pp.gNN83gfynbD (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02 (failed)
>  prop read: QL3u.B+yZ9Ve8gC1 (failed)
>  old prop read: QL3u.B+yZ9Ve8gC1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0200 (failed)
>  prop read: tWJy.ld94kxNGZf5 (failed)
>  old prop read: tWJy.ld94kxNGZf5 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0b00 (failed)
>  prop read: KiZ0.WYwRElrJa93 (failed)
>  old prop read: KiZ0.WYwRElrJa93 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0800 (failed)
>  prop read: ntp4.bvKf3UMzZfE (failed)
>  old prop read: ntp4.bvKf3UMzZfE (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c04 (failed)
>  prop read: E349.DE8RM9cWQQ8 (failed)
>  old prop read: E349.DE8RM9cWQQ8 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0700 (failed)
>  prop read: hEKD.yhTOLOXWEq7 (failed)
>  old prop read: hEKD.yhTOLOXWEq7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501_0 (failed)
>  prop read: NhVi.BuKI+1soRmD (failed)
>  old prop read: NhVi.BuKI+1soRmD (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501 (failed)
>  prop read: qslm.BuKI+1soRmD (failed)
>  old prop read: qslm.BuKI+1soRmD (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0400 (failed)
>  prop read: H20r.13ubA72AEK3 (failed)
>  old prop read: H20r.13ubA72AEK3 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_0 (failed)
>  prop read: S_Uw.3fyvFV+mbWD (failed)
>  old prop read: S_Uw.3fyvFV+mbWD (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1 (failed)
>  prop read: v9l_.3fyvFV+mbWD (failed)
>  old prop read: v9l_.3fyvFV+mbWD (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_662243204380 (failed)
>  prop read: Fffu.SyiDpbpBto2 (failed)
>  old prop read: Fffu.SyiDpbpBto2 (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_31cd9186_2a0d_4428_9ef5_a47024bab0ec (failed)
>  prop read: 0fbI.SE1wIdpsiiC (failed)
>  old prop read: 0fbI.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_part2_size_1069286400 (failed)
>  prop read: TqrM.SE1wIdpsiiC (failed)
>  old prop read: TqrM.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_4dbeb633_0dd3_9faf_85bb_064e0840ee28_0 (failed)
>  prop read: x+5R.SE1wIdpsiiC (failed)
>  old prop read: x+5R.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_662209944312 (failed)
>  prop read: 90A1.4KA4tTb6VK0 (failed)
>  old prop read: 90A1.4KA4tTb6VK0 (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_part1_size_518160384 (failed)
>  prop read: BZE9.SE1wIdpsiiC (failed)
>  old prop read: BZE9.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_part2_size_764951040 (failed)
>  prop read: ekUD.SE1wIdpsiiC (failed)
>  old prop read: ekUD.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_4dbeb633_0dd3_9faf_85bb_064e0840ee28 (failed)
>  prop read: 5wkH.SE1wIdpsiiC (failed)
>  old prop read: 5wkH.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_model_LG_DVD_ROM_DRD_8160B (failed)
>  prop read: cBQ5.0xegWgA0Il3 (ok)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_5VO2206DL02263 (failed)
>  prop read: 3Ng9.cFNVA29Xy2A (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2_if0 (failed)
>  prop read: k4bc.oA+AiqMYeZA (failed)
>  old prop read: k4bc.oA+AiqMYeZA (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if0_logicaldev_input (failed)
>  prop read: cLrx.iDDa63kSTH8 (failed)
>  old prop read: cLrx.iDDa63kSTH8 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if1_logicaldev_input (failed)
>  prop read: 3X50.RKIkTbX2OK2 (failed)
>  old prop read: 3X50.RKIkTbX2OK2 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if2_logicaldev_input (failed)
>  prop read: WiL4.BCep8RIGl_5 (failed)
>  old prop read: WiL4.BCep8RIGl_5 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_3_if0 (failed)
>  prop read: pBe4.Zv3m3b9Gbr1 (failed)
>  old prop read: pBe4.Zv3m3b9Gbr1 (failed)
>  prop read: rdCR.j8NaKXDZtZ6 (failed)
>  old prop read: rdCR.j8NaKXDZtZ6 (failed)
>  prop read: rdCR.EY_qmtb9YY0 (failed)
>  old prop read: rdCR.EY_qmtb9YY0 (failed)
>  prop read: /org/freedesktop/Hal/devices/net_00_09_5b_3b_b3_14 (failed)
>  prop read: usDW.ndpeucax6V1 (failed)
>  old prop read: usDW.ndpeucax6V1 (failed)
>  prop read: ZsBS.GQNx7L4uPNA (failed)
>  old prop read: ZsBS.GQNx7L4uPNA (failed)
>  prop read: wl2P.nfEXJulusj6 (failed)
>  old prop read: wl2P.nfEXJulusj6 (failed)
>----- /proc/modules -----
>  parport_pc 38980 0 - Live 0xf12d0000
>  parport 33864 1 parport_pc, Live 0xf12b9000
>  orinoco_plx 6272 0 - Live 0xf14b3000
>  orinoco 38548 1 orinoco_plx, Live 0xf14f9000
>  hermes 7296 2 orinoco_plx,orinoco, Live 0xf12b6000
>  iptable_filter 2816 0 - Live 0xf14c8000
>  ip_tables 19456 1 iptable_filter, Live 0xf1555000
>  hfsplus 75140 0 - Live 0xf1a81000
>  vfat 12800 0 - Live 0xf1943000
>  fat 49564 1 vfat, Live 0xf194e000
>  subfs 7424 1 - Live 0xf193b000
>  speedstep_lib 4228 0 - Live 0xf1938000
>  freq_table 4612 0 - Live 0xf190b000
>  snd_pcm_oss 59168 0 - Live 0xf1919000
>  snd_mixer_oss 18944 1 snd_pcm_oss, Live 0xf18d2000
>  snd_seq_midi 9760 0 - Live 0xf1907000
>  snd_seq_midi_event 6784 1 snd_seq_midi, Live 0xf18e1000
>  snd_seq 51984 2 snd_seq_midi,snd_seq_midi_event, Live 0xf192a000
>  button 8208 0 - Live 0xf18dd000
>  battery 12164 0 - Live 0xf18c3000
>  ac 6276 0 - Live 0xf18c7000
>  mga 58368 1 - Live 0xf18f7000
>  drm 61844 2 mga, Live 0xf18e6000
>  edd 9824 0 - Live 0xf1800000
>  snd_ens1371 23136 0 - Live 0xf18cb000
>  gameport 14600 1 snd_ens1371, Live 0xf186d000
>  snd_rawmidi 24864 2 snd_seq_midi,snd_ens1371, Live 0xf18bb000
>  snd_seq_device 8588 3 snd_seq_midi,snd_seq,snd_rawmidi, Live 0xf1863000
>  snd_ac97_codec 90620 1 snd_ens1371, Live 0xf1887000
>  snd_pcm 93064 3 snd_pcm_oss,snd_ens1371,snd_ac97_codec, Live 0xf18a3000
>  snd_timer 24452 2 snd_seq,snd_pcm, Live 0xf17f1000
>  snd 60420 11 snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_seq_midi_event,snd_seq,snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer, Live 0xf1877000
>  snd_page_alloc 10632 1 snd_pcm, Live 0xf17d8000
>  snd_ac97_bus 2304 1 snd_ac97_codec, Live 0xf17d0000
>  af_packet 21384 2 - Live 0xf17f9000
>  nls_utf8 2048 0 - Live 0xf17d2000
>  joydev 9408 0 - Live 0xf17d4000
>  sg 35744 0 - Live 0xf17e7000
>  st 38944 0 - Live 0xf17dc000
>  sd_mod 18576 0 - Live 0xf17c4000
>  sr_mod 16420 0 - Live 0xf17ca000
>  scsi_mod 131688 4 sg,st,sd_mod,sr_mod, Live 0xf1841000
>  ipv6 242752 14 - Live 0xf1804000
>  usbhid 43616 0 - Live 0xf15a4000
>  p80211 33808 0 - Live 0xf159a000
>  video_buf 20868 0 - Live 0xf1515000
>  soundcore 9184 1 snd, Live 0xf152a000
>  ir_common 8196 0 - Live 0xf1526000
>  i2c_viapro 8080 0 - Live 0xf14c3000
>  via686a 19096 0 - Live 0xf151c000
>  i2c_sensor 3584 1 via686a, Live 0xf14c6000
>  i2c_core 20368 3 i2c_viapro,via686a,i2c_sensor, Live 0xf14b6000
>  matrox_w1 3840 0 - Live 0xf12b0000
>  wire 22928 1 matrox_w1, Live 0xf14bc000
>  uhci_hcd 32016 0 - Live 0xf1504000
>  generic 4356 0 [permanent], Live 0xf14f6000
>  amd_k7_agp 8588 1 - Live 0xf12c7000
>  agpgart 33096 2 drm,amd_k7_agp, Live 0xf14cb000
>  usbcore 112640 3 usbhid,uhci_hcd, Live 0xf1496000
>  pci_hotplug 26164 0 - Live 0xf148e000
>  reiserfs 250608 4 - Live 0xf12e0000
>  ide_cd 39684 0 - Live 0xf1290000
>  cdrom 36896 2 sr_mod,ide_cd, Live 0xf082b000
>  ide_disk 17152 7 - Live 0xf086a000
>  dm_snapshot 17180 0 - Live 0xf0864000
>  dm_mod 55100 6 dm_snapshot, Live 0xf1281000
>  raid1 17920 1 - Live 0xf085e000
>  fan 6020 0 - Live 0xf0828000
>  thermal 18568 0 - Live 0xf0815000
>  processor 32060 1 thermal, Live 0xf0855000
>  pdc202xx_old 10496 0 [permanent], Live 0xf0820000
>  via82cxxx 13212 0 [permanent], Live 0xf081b000
>  ide_core 122344 5 generic,ide_cd,ide_disk,pdc202xx_old,via82cxxx, Live 0xf0836000
>----- /proc/modules end -----
>  used irqs: 0,2,3,4,5,6,7,8,9,10,11,14,15
>=========== end debug info ============
>01: None 00.0: 0102 Floppy disk controller
>  [Created at floppy.111]
>  Unique ID: rdCR.3wRL2_g4d2B
>  Hardware Class: storage
>  Model: "Floppy disk controller"
>  I/O Ports: 0x3f2-0x3f5 (rw)
>  DMA: 2
>  IRQ: 6 (14 events)
>  I/O Port: 0x3f7 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>02: Floppy 00.0: 10603 Floppy Disk
>  [Created at floppy.119]
>  UDI: /org/freedesktop/Hal/devices/computer_storage
>  Unique ID: sPPV.oZ89vuho4Y3
>  Parent ID: rdCR.3wRL2_g4d2B
>  Hardware Class: floppy
>  Model: "Floppy Disk"
>  Device File: /dev/fd0
>  Size: 2880 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #1 (Floppy disk controller)
>
>03: None 00.0: 10105 BIOS
>  [Created at bios.154]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: on
>    Caps Lock: off
>  Serial Port 0: 0x3f8
>  Serial Port 1: 0x2f8
>  Parallel Port 0: 0x378
>  Base Memory: 639 kB
>  PnP BIOS: @@@0000
>  BIOS: extended read supported
>  BIOS32 Service Directory Entry: 0xfb690
>  SMBIOS Version: 2.2
>  BIOS Info: #0
>    Vendor: "Award Software International, Inc."
>    Version: "6.00 PG"
>    Date: "07/15/2003"
>    Start Address: 0xf0000
>    ROM Size: 256 kB
>    Features: 0x0037000000007fcbde90
>      ISA supported
>      PCI supported
>      PnP supported
>      APM supported
>      BIOS flashable
>      BIOS shadowing allowed
>      ESCD supported
>      CD boot supported
>      Selectable boot supported
>      BIOS ROM socketed
>      EDD spec supported
>      360kB Floppy supported
>      1.2MB Floppy supported
>      720kB Floppy supported
>      2.88MB Floppy supported
>      Print Screen supported
>      8042 Keyboard Services supported
>      Serial Services supported
>      Printer Services supported
>      CGA/Mono Video supported
>      ACPI supported
>      USB Legacy supported
>      AGP supported
>      LS-120 boot supported
>      ATAPI ZIP boot supported
>  System Info: #1
>    Version: "00000000"
>    Serial: "00000000"
>    UUID: undefined, but settable
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #2
>    Manufacturer: "Gigabyte Technology Co., LTD"
>    Product: "7DXR"
>    Version: "1.x"
>    Serial: "00000000"
>  Chassis Info: #3
>    Serial: "00000000"
>    Asset Tag: "00000000"
>    Type: 0x03 (Desktop)
>    Bootup State: 0x02 (Unknown)
>    Power Supply State: 0x02 (Unknown)
>    Thermal State: 0x02 (Unknown)
>    Security Status: 0x02 (Unknown)
>  Processor Info: #4
>    Socket: "Socket A"
>    Socket Type: 0x04 (ZIF Socket)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0x01 (Other)
>    Manufacturer: "AMD"
>    Version: "AMD Athlon(tm)"
>    Processor ID: 0x0183f9ff00000644
>    Status: 0x01 (Enabled)
>    Voltage: 1.7 V
>    External Clock: 133 MHz
>    Max. Speed: 1400 MHz
>    Current Speed: 1333 MHz
>    L1 Cache: #9
>    L2 Cache: #10
>  Type 5 Record: #5
>    Data 00: 05 16 05 00 03 04 03 03 09 0c 00 01 01 02 03 06
>    Data 10: 00 07 00 08 00 04
>  Type 6 Record: #6
>    Data 00: 06 0c 06 00 01 01 0a 01 00 88 88 00
>    String 1: "BANK_0"
>  Type 6 Record: #7
>    Data 00: 06 0c 07 00 01 23 0a 01 00 88 88 00
>    String 1: "BANK_1"
>  Type 6 Record: #8
>    Data 00: 06 0c 08 00 01 45 0a 01 00 08 08 00
>    String 1: "BANK_2"
>  Cache Info: #9
>    Designation: "SLOT 1"
>    Level: L1
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x03 (None)
>    Type: 0x05 (Unified)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 128 kB
>    Current Size: 128 kB
>    Supported SRAM Types: 0x0020 (Synchronous)
>    Current SRAM Type: 0x0020 (Synchronous)
>  Cache Info: #10
>    Designation: "SLOT 1"
>    Level: L2
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x03 (None)
>    Type: 0x05 (Unified)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 256 kB
>    Current Size: 256 kB
>    Supported SRAM Types: 0x0020 (Synchronous)
>    Current SRAM Type: 0x0020 (Synchronous)
>  Port Connector: #11
>    Internal Designator: "IDE1"
>    External Designator: "NONE"
>  Port Connector: #12
>    Internal Designator: "IDE2"
>    External Designator: "NONE"
>  Port Connector: #13
>    Internal Designator: "FLOPPY"
>    External Designator: "NONE"
>  Port Connector: #14
>    Type: 0x08 (Serial Port 16550 Compatible)
>    Internal Designator: "NONE"
>    External Designator: "COM1"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #15
>    Type: 0x08 (Serial Port 16550 Compatible)
>    Internal Designator: "NONE"
>    External Designator: "COM2"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #16
>    Type: 0x05 (Parallel Port ECP/EPP)
>    Internal Designator: "NONE"
>    External Designator: "LPT"
>    External Connector: 0x05 (DB-25 pin female)
>  Port Connector: #17
>    Type: 0x0d (Keyboard Port)
>    Internal Designator: "NONE"
>    External Designator: "Keyboard"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #18
>    Type: 0x0e (Mouse Port)
>    Internal Designator: "NONE"
>    External Designator: "PS/2 Mouse"
>    External Connector: 0x0f (PS/2)
>  System Slot: #19
>    Designation: "PCI"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 9
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #20
>    Designation: "PCI"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x04 (In Use)
>    Length: 0x04 (Long)
>    Slot ID: 10
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #21
>    Designation: "PCI"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 15
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #22
>    Designation: "PCI"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 12
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #23
>    Designation: "PCI"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 8
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #24
>    Designation: "AGP"
>    Type: 0x0f (AGP)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x04 (In Use)
>    Length: 0x04 (Long)
>    Slot ID: 8
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  Port Connector: #25
>    Type: 0x10 (USB)
>    Internal Designator: "NONE"
>    External Designator: "USB1"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #26
>    Type: 0x10 (USB)
>    Internal Designator: "USB2"
>    External Designator: "NONE"
>  Language Info: #27
>    Languages: n|US|iso8859-1, n|US|iso8859-1, r|CA|iso8859-1, a|JP|unicode
>    Current: n|US|iso8859-1
>  Physical Memory Array: #28
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 3
>    Max. Size: 512 MB
>    ECC: 0x03 (None)
>    Error Info: No Error
>  Memory Device: #29
>    Location: "BANK_0"
>    Bank: "Bank0/1"
>    Memory Array: #28
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x01 (Other)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 256 MB
>  Memory Device: #30
>    Location: "BANK_1"
>    Bank: "Bank2/3"
>    Memory Array: #28
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x01 (Other)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 256 MB
>  Memory Device: #31
>    Location: "BANK_2"
>    Bank: "Bank4/5"
>    Memory Array: #28
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x01 (Other)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 256 MB
>  Memory Array Mapping: #32
>    Memory Array: #28
>    Partition Width: 1
>    Start Address: 0x00000000
>    End Address: 0x00040000
>  Memory Device Mapping: #33
>    Memory Device: #29
>    Array Mapping: #32
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0x00040000
>  Memory Device Mapping: #34
>    Memory Device: #30
>    Array Mapping: #32
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0x00040000
>  Memory Device Mapping: #35
>    Memory Device: #31
>    Array Mapping: #32
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0x00040000
>  Type 32 Record: #36
>    Data 00: 20 0b 24 00 00 00 00 00 00 00 00
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 10107 System
>  [Created at sys.56]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>05: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  IRQ: 2 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0802 Timer (8254)
>  [Created at misc.228]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (2105261 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (3 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>11: None 00.0: 0701 Parallel controller (SPP)
>  [Created at misc.260]
>  Unique ID: YMnp.ecK7NLYWZ5D
>  Hardware Class: unknown
>  Model: "Parallel controller"
>  Device File: /dev/lp0
>  I/O Ports: 0x378-0x37a (rw)
>  I/O Ports: 0x37b-0x37f (rw)
>  IRQ: 7 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>12: None 00.0: 10400 PS/2 Controller
>  [Created at misc.302]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>14: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x2ffeffff (rw)
>  Memory Size: 768 MB
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>15: PCI(AGP) 00.0: 0600 Host bridge
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_1022_700e
>  Unique ID: qLht.hr3dq8CToGA
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "AMD-760 [IGD4-1P] System Controller"
>  Vendor: pci 0x1022 "AMD"
>  Device: pci 0x700e "AMD-760 [IGD4-1P] System Controller"
>  Revision: 0x13
>  Driver: "agpgart-amdk7"
>  Memory Range: 0xd0000000-0xd3ffffff (rw,prefetchable)
>  Memory Range: 0xda021000-0xda021fff (rw,prefetchable)
>  I/O Ports: 0x9000-0x9003 (rw,disabled)
>  Driver Info #0:
>    Driver Status: amd_k7_agp is active
>    Driver Activation Cmd: "modprobe amd_k7_agp"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>16: PCI 01.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_1022_700f
>  Unique ID: vSkL.TWicxR2Z3DA
>  SysFS ID: /devices/pci0000:00/0000:00:01.0
>  SysFS BusID: 0000:00:01.0
>  Hardware Class: bridge
>  Model: "AMD-760 [IGD4-1P] AGP Bridge"
>  Vendor: pci 0x1022 "AMD"
>  Device: pci 0x700f "AMD-760 [IGD4-1P] AGP Bridge"
>  Driver Info #0:
>    Driver Status: shpchp is not active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>17: PCI 07.0: 0601 ISA bridge
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_686
>  Unique ID: M71A.X_nvyU4S8BA
>  SysFS ID: /devices/pci0000:00/0000:00:07.0
>  SysFS BusID: 0000:00:07.0
>  Hardware Class: bridge
>  Model: "VIA VT82C686/A PCI to ISA Bridge"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x0686 "VT82C686 [Apollo Super South]"
>  SubVendor: pci 0x1106 "VIA Technologies, Inc."
>  SubDevice: pci 0x0686 "VT82C686/A PCI to ISA Bridge"
>  Revision: 0x40
>  Driver: "parport_pc"
>  Driver Info #0:
>    Driver Status: parport_pc is active
>    Driver Activation Cmd: "modprobe parport_pc"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>18: PCI 07.1: 0101 IDE interface
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_571
>  Unique ID: ESW+.mcsZ0a690T4
>  SysFS ID: /devices/pci0000:00/0000:00:07.1
>  SysFS BusID: 0000:00:07.1
>  Hardware Class: storage
>  Model: "VIA VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x0571 "VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE"
>  SubVendor: pci 0x1106 "VIA Technologies, Inc."
>  SubDevice: pci 0x0571 "VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE"
>  Revision: 0x06
>  Driver: "VIA_IDE"
>  I/O Ports: 0x9400-0x940f (rw)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  I/O Ports: 0x170-0x177 (rw)
>  I/O Port: 0x376 (rw)
>  I/O Ports: 0xb800-0xb807 (rw)
>  I/O Port: 0xbc02 (rw)
>  I/O Ports: 0xc800-0xc83f (rw)
>  IRQ: 14 (69663 events)
>  IRQ: 15 (122246 events)
>  IRQ: 11 (152283 events)
>  Driver Info #0:
>    Driver Status: via82cxxx is active
>    Driver Activation Cmd: "modprobe via82cxxx"
>  Driver Info #1:
>    Driver Status: generic is active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>19: PCI 07.2: 0c03 USB Controller (UHCI)
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3038_0
>  Unique ID: 5n+q.S1sxJsLNxW6
>  SysFS ID: /devices/pci0000:00/0000:00:07.2
>  SysFS BusID: 0000:00:07.2
>  Hardware Class: usb controller
>  Model: "VIA Technologies, Inc. (Wrong ID) USB Controller"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3038 "VT82xxxxx UHCI USB 1.1 Controller"
>  SubVendor: pci 0x0925 "VIA Technologies, Inc. (Wrong ID)"
>  SubDevice: pci 0x1234 "USB Controller"
>  Revision: 0x16
>  Driver: "uhci_hcd"
>  I/O Ports: 0x9800-0x981f (rw)
>  IRQ: 11 (152283 events)
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>20: PCI 07.3: 0c03 USB Controller (UHCI)
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3038
>  Unique ID: y5Vg.S1sxJsLNxW6
>  SysFS ID: /devices/pci0000:00/0000:00:07.3
>  SysFS BusID: 0000:00:07.3
>  Hardware Class: usb controller
>  Model: "VIA Technologies, Inc. (Wrong ID) USB Controller"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3038 "VT82xxxxx UHCI USB 1.1 Controller"
>  SubVendor: pci 0x0925 "VIA Technologies, Inc. (Wrong ID)"
>  SubDevice: pci 0x1234 "USB Controller"
>  Revision: 0x16
>  Driver: "uhci_hcd"
>  I/O Ports: 0x9c00-0x9c1f (rw)
>  IRQ: 11 (152283 events)
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>21: PCI 07.4: 0c05 SMBus
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3057
>  Unique ID: qQ_V.1Nhh3zpLWIB
>  SysFS ID: /devices/pci0000:00/0000:00:07.4
>  SysFS BusID: 0000:00:07.4
>  Hardware Class: unknown
>  Model: "VIA VT82C686 [Apollo Super ACPI]"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3057 "VT82C686 [Apollo Super ACPI]"
>  SubVendor: pci 0x1106 "VIA Technologies, Inc."
>  SubDevice: pci 0x3057 
>  Revision: 0x40
>  IRQ: 9 (1 event)
>  Driver Info #0:
>    Driver Status: via686a is active
>    Driver Activation Cmd: "modprobe via686a"
>  Driver Info #1:
>    Driver Status: i2c_viapro is active
>    Driver Activation Cmd: "modprobe i2c_viapro"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>22: PCI 0a.0: 0282 WLAN controller
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_1385_4100
>  Unique ID: rBUF.wwk9OkfoCu6
>  SysFS ID: /devices/pci0000:00/0000:00:0a.0
>  SysFS BusID: 0000:00:0a.0
>  Hardware Class: network
>  Model: "Netgear 802.11b Wireless Adapter (MA301)"
>  Vendor: pci 0x1385 "Netgear"
>  Device: pci 0x4100 "802.11b Wireless Adapter (MA301)"
>  SubVendor: pci 0x1385 "Netgear"
>  SubDevice: pci 0x4100 
>  Revision: 0x02
>  Driver: "orinoco_plx"
>  Device File: eth0
>  Features: WLAN
>  I/O Ports: 0xac00-0xac7f (rw)
>  Memory Range: 0xda022000-0xda022fff (rw,non-prefetchable)
>  I/O Ports: 0xb000-0xb03f (rw)
>  IRQ: 10 (68434 events)
>  HW Address: 00:09:5b:3b:b3:14
>  Link detected: yes
>  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
>  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472
>  WLAN bitrates: 1 2 5.5 11
>  WLAN encryption modes: WEP40 WEP104
>  WLAN authentication modes: open sharedkey
>  Driver Info #0:
>    Driver Status: prism2_plx is not active
>    Driver Activation Cmd: "modprobe prism2_plx"
>  Driver Info #1:
>    Driver Status: orinoco_plx is active
>    Driver Activation Cmd: "modprobe orinoco_plx"
>  Driver Info #2:
>    Driver Status: hostap_plx is not active
>    Driver Activation Cmd: "modprobe hostap_plx"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>23: PCI 0d.0: 11200 TV Card
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_1131_7134
>  Unique ID: qnJ_.AIy4B8S35H6
>  SysFS ID: /devices/pci0000:00/0000:00:0d.0
>  SysFS BusID: 0000:00:0d.0
>  Hardware Class: tv card
>  Model: "TERRATEC Terratec Cinergy 400 TV"
>  Vendor: pci 0x1131 "Philips Semiconductors"
>  Device: pci 0x7134 "SAA7134"
>  SubVendor: pci 0x153b "TERRATEC Electronic GmbH"
>  SubDevice: pci 0x1142 "Terratec Cinergy 400 TV"
>  Revision: 0x01
>  Memory Range: 0xda020000-0xda0203ff (rw,non-prefetchable)
>  IRQ: 11 (152283 events)
>  Driver Info #0:
>    Driver Status: saa7134 is not active
>    Driver Activation Cmd: "modprobe saa7134"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>
>24: PCI 0e.0: 0401 Multimedia audio controller
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_1274_5880
>  Unique ID: vuMS.msFc4tvhLd7
>  SysFS ID: /devices/pci0000:00/0000:00:0e.0
>  SysFS BusID: 0000:00:0e.0
>  Hardware Class: sound
>  Model: "Ensoniq Creative Sound Blaster AudioPCI128"
>  Vendor: pci 0x1274 "Ensoniq"
>  Device: pci 0x5880 "5880 AudioPCI"
>  SubVendor: pci 0x1274 "Ensoniq"
>  SubDevice: pci 0x2000 "Creative Sound Blaster AudioPCI128"
>  Revision: 0x03
>  Driver: "ENS1371"
>  I/O Ports: 0xb400-0xb43f (rw)
>  IRQ: 10 (68434 events)
>  Driver Info #0:
>    Driver Status: es1371 is not active
>    Driver Activation Cmd: "modprobe es1371"
>  Driver Info #1:
>    Driver Status: snd_ens1371 is active
>    Driver Activation Cmd: "modprobe snd_ens1371"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>
>25: PCI 10.0: 0180 Unknown mass storage controller
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_105a_d30
>  Unique ID: 37TO.8WdZzOai8cD
>  SysFS ID: /devices/pci0000:00/0000:00:10.0
>  SysFS BusID: 0000:00:10.0
>  Hardware Class: storage
>  Model: "Promise Ultra100"
>  Vendor: pci 0x105a "Promise Technology, Inc."
>  Device: pci 0x0d30 "PDC20265 (FastTrak100 Lite/Ultra100)"
>  SubVendor: pci 0x105a "Promise Technology, Inc."
>  SubDevice: pci 0x4d33 "Ultra100"
>  Revision: 0x02
>  Driver: "Promise_Old_IDE"
>  I/O Ports: 0xb800-0xb807 (rw)
>  I/O Ports: 0xbc00-0xbc03 (rw)
>  I/O Ports: 0xc000-0xc007 (rw)
>  I/O Ports: 0xc400-0xc403 (rw)
>  I/O Ports: 0xc800-0xc83f (rw)
>  Memory Range: 0xda000000-0xda01ffff (rw,non-prefetchable)
>  Memory Range: 0x30000000-0x3000ffff (ro,prefetchable)
>  IRQ: 11 (152283 events)
>  Driver Info #0:
>    Driver Status: pdc202xx_old is active
>    Driver Activation Cmd: "modprobe pdc202xx_old"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>26: PCI(AGP) 105.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.271]
>  UDI: /org/freedesktop/Hal/devices/pci_102b_525
>  Unique ID: ul7N.WzZVSRCzUm3
>  Parent ID: vSkL.TWicxR2Z3DA
>  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
>  SysFS BusID: 0000:01:05.0
>  Hardware Class: graphics card
>  Model: "Matrox Millennium G450 Dual Head LX"
>  Vendor: pci 0x102b "Matrox Graphics, Inc."
>  Device: pci 0x0525 "MGA G400 AGP"
>  SubVendor: pci 0x102b "Matrox Graphics, Inc."
>  SubDevice: pci 0x0542 "Millennium G450 Dual Head LX"
>  Revision: 0x82
>  Driver: "matrox_w1"
>  Memory Range: 0xd4000000-0xd5ffffff (rw,prefetchable)
>  Memory Range: 0xd6000000-0xd6003fff (rw,non-prefetchable)
>  Memory Range: 0xd7000000-0xd77fffff (rw,non-prefetchable)
>  Memory Range: 0xd6020000-0xd603ffff (ro,prefetchable,disabled)
>  IRQ: 5 (367886 events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Driver Info #0:
>    XFree86 v4 Server Module: mga
>  Driver Info #1:
>    XFree86 v4 Server Module: mga
>    3D Support: yes
>    Extensions: dri
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #16 (PCI bridge)
>
>27: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01
>  Unique ID: z9pp.gNN83gfynbD
>  SysFS ID: /devices/pnp0/00:00
>  SysFS BusID: 00:00
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c01 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>28: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
>  Unique ID: QL3u.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:01
>  SysFS BusID: 00:01
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>29: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
>  Unique ID: tWJy.ld94kxNGZf5
>  SysFS ID: /devices/pnp0/00:02
>  SysFS BusID: 00:02
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0200 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>30: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
>  Unique ID: KiZ0.WYwRElrJa93
>  SysFS ID: /devices/pnp0/00:03
>  SysFS BusID: 00:03
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0b00 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>31: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
>  Unique ID: ntp4.bvKf3UMzZfE
>  SysFS ID: /devices/pnp0/00:04
>  SysFS BusID: 00:04
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0800 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>32: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
>  Unique ID: E349.DE8RM9cWQQ8
>  SysFS ID: /devices/pnp0/00:05
>  SysFS BusID: 00:05
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c04 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>33: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0700
>  Unique ID: hEKD.yhTOLOXWEq7
>  SysFS ID: /devices/pnp0/00:06
>  SysFS BusID: 00:06
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0700 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>34: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_0
>  Unique ID: NhVi.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:07
>  SysFS BusID: 00:07
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>35: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501
>  Unique ID: qslm.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:08
>  SysFS BusID: 00:08
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>36: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0400
>  Unique ID: H20r.13ubA72AEK3
>  SysFS ID: /devices/pnp0/00:09
>  SysFS BusID: 00:09
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0400 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>37: None 00.0: 0700 Serial controller (16550)
>  [Created at serial.73]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_0
>  Unique ID: S_Uw.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS0
>  I/O Ports: 0x3f8-0x3ff (rw)
>  IRQ: 4 (16 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>38: None 00.1: 0700 Serial controller (16550)
>  [Created at serial.73]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1
>  Unique ID: v9l_.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS1
>  I/O Ports: 0x2f8-0x2ff (rw)
>  IRQ: 3 (16 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>39: IDE 00.0: 10600 Disk
>  [Created at block.188]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_662243204380
>  Unique ID: Fffu.SyiDpbpBto2
>  Parent ID: ESW+.mcsZ0a690T4
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:07.1/ide0/0.0
>  Hardware Class: disk
>  Model: "MAXTOR 6L040J2"
>  Vendor: "MAXTOR"
>  Device: "6L040J2"
>  Revision: "AR1.0500"
>  Serial ID: "662243204380"
>  Driver: "VIA_IDE", "ide-disk", "ide-disk"
>  Device File: /dev/disk/by-id/ata-MAXTOR_6L040J2_662243204380
>  Device Files: /dev/hda, /dev/disk/by-id/ata-MAXTOR_6L040J2_662243204380, /dev/disk/by-path/pci-0000:00:07.1-ide-0:0
>  Device Number: block 3:0-3:63
>  BIOS id: 0x80
>  Size: 78177792 sectors a 512 bytes
>  Geometry (Physical): CHS 77557/16/63
>  Geometry (Logical): CHS 77557/16/63
>  Cache: 1818 kb
>  Geometry (BIOS EDD): CHS 77557/16/63
>  Size (BIOS EDD): 78177792 sectors
>  Geometry (BIOS Legacy): CHS 1024/255/63
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #18 (IDE interface)
>
>40: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_31cd9186_2a0d_4428_9ef5_a47024bab0ec
>  Unique ID: 0fbI.SE1wIdpsiiC
>  Parent ID: Fffu.SyiDpbpBto2
>  SysFS ID: /block/hda/hda1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-MAXTOR_6L040J2_662243204380-part1
>  Device Files: /dev/hda1, /dev/disk/by-id/ata-MAXTOR_6L040J2_662243204380-part1, /dev/disk/by-path/pci-0000:00:07.1-ide-0:0-part1, /dev/disk/by-uuid/31cd9186-2a0d-4428-9ef5-a47024bab0ec
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #39 (Disk)
>
>41: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_part2_size_1069286400
>  Unique ID: TqrM.SE1wIdpsiiC
>  Parent ID: Fffu.SyiDpbpBto2
>  SysFS ID: /block/hda/hda2
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-MAXTOR_6L040J2_662243204380-part2
>  Device Files: /dev/hda2, /dev/disk/by-id/ata-MAXTOR_6L040J2_662243204380-part2, /dev/disk/by-path/pci-0000:00:07.1-ide-0:0-part2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #39 (Disk)
>
>42: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_4dbeb633_0dd3_9faf_85bb_064e0840ee28_0
>  Unique ID: x+5R.SE1wIdpsiiC
>  Parent ID: Fffu.SyiDpbpBto2
>  SysFS ID: /block/hda/hda3
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-MAXTOR_6L040J2_662243204380-part3
>  Device Files: /dev/hda3, /dev/disk/by-id/ata-MAXTOR_6L040J2_662243204380-part3, /dev/disk/by-path/pci-0000:00:07.1-ide-0:0-part3, /dev/disk/by-uuid/4dbeb633-0dd3-9faf-85bb-064e0840ee28
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #39 (Disk)
>
>43: IDE 02.0: 10600 Disk
>  [Created at block.188]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_662209944312
>  Unique ID: 90A1.4KA4tTb6VK0
>  Parent ID: ESW+.mcsZ0a690T4
>  SysFS ID: /block/hdc
>  SysFS BusID: 1.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:07.1/ide1/1.0
>  Hardware Class: disk
>  Model: "MAXTOR 6L040J2"
>  Vendor: "MAXTOR"
>  Device: "6L040J2"
>  Revision: "AR1.0500"
>  Serial ID: "662209944312"
>  Driver: "VIA_IDE", "ide-disk", "ide-disk"
>  Device File: /dev/disk/by-id/ata-MAXTOR_6L040J2_662209944312
>  Device Files: /dev/hdc, /dev/disk/by-id/ata-MAXTOR_6L040J2_662209944312, /dev/disk/by-path/pci-0000:00:07.1-ide-1:0
>  Device Number: block 22:0-22:63
>  BIOS id: 0x81
>  Size: 78177792 sectors a 512 bytes
>  Geometry (Physical): CHS 77557/16/63
>  Geometry (Logical): CHS 77557/16/63
>  Cache: 1818 kb
>  Geometry (BIOS EDD): CHS 77557/16/63
>  Size (BIOS EDD): 78177792 sectors
>  Geometry (BIOS Legacy): CHS 1024/255/63
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #18 (IDE interface)
>
>44: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_part1_size_518160384
>  Unique ID: BZE9.SE1wIdpsiiC
>  Parent ID: 90A1.4KA4tTb6VK0
>  SysFS ID: /block/hdc/hdc1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-MAXTOR_6L040J2_662209944312-part1
>  Device Files: /dev/hdc1, /dev/disk/by-id/ata-MAXTOR_6L040J2_662209944312-part1, /dev/disk/by-path/pci-0000:00:07.1-ide-1:0-part1
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #43 (Disk)
>
>45: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_part2_size_764951040
>  Unique ID: ekUD.SE1wIdpsiiC
>  Parent ID: 90A1.4KA4tTb6VK0
>  SysFS ID: /block/hdc/hdc2
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-MAXTOR_6L040J2_662209944312-part2
>  Device Files: /dev/hdc2, /dev/disk/by-id/ata-MAXTOR_6L040J2_662209944312-part2, /dev/disk/by-path/pci-0000:00:07.1-ide-1:0-part2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #43 (Disk)
>
>46: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_4dbeb633_0dd3_9faf_85bb_064e0840ee28
>  Unique ID: 5wkH.SE1wIdpsiiC
>  Parent ID: 90A1.4KA4tTb6VK0
>  SysFS ID: /block/hdc/hdc3
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-MAXTOR_6L040J2_662209944312-part3
>  Device Files: /dev/hdc3, /dev/disk/by-id/ata-MAXTOR_6L040J2_662209944312-part3, /dev/disk/by-path/pci-0000:00:07.1-ide-1:0-part3, /dev/disk/by-uuid/4dbeb633-0dd3-9faf-85bb-064e0840ee28
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #43 (Disk)
>
>47: IDE 03.0: 10602 CD-ROM (DVD)
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_model_LG_DVD_ROM_DRD_8160B
>  Unique ID: cBQ5.0xegWgA0Il3
>  Parent ID: ESW+.mcsZ0a690T4
>  SysFS ID: /block/hdd
>  SysFS BusID: 1.1
>  SysFS Device Link: /devices/pci0000:00/0000:00:07.1/ide1/1.1
>  Hardware Class: cdrom
>  Model: "LG DVD-ROM DRD-8160B"
>  Vendor: "LG"
>  Device: "DVD-ROM DRD-8160B"
>  Revision: "1.01"
>  Serial ID: ""
>  Driver: "VIA_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/dvd
>  Device Files: /dev/hdd, /dev/dvd, /dev/disk/by-path/pci-0000:00:07.1-ide-1:1
>  Device Number: block 22:64
>  Features: DVD
>  Size: 0 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #18 (IDE interface)
>
>48: IDE 04.0: 10602 CD-ROM (CD-RW)
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_5VO2206DL02263
>  Unique ID: 3Ng9.cFNVA29Xy2A
>  Parent ID: 37TO.8WdZzOai8cD
>  SysFS ID: /block/hde
>  SysFS BusID: 2.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:10.0/ide2/2.0
>  Hardware Class: cdrom
>  Model: "PHILIPS CDRW1610A"
>  Vendor: "PHILIPS"
>  Device: "CDRW1610A"
>  Revision: "0.010000"
>  Serial ID: "5VO2206DL02263"
>  Driver: "Promise_Old_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/cdrecorder
>  Device Files: /dev/hde, /dev/cdrecorder, /dev/cdrom, /dev/disk/by-id/ata-PHILIPS_CDRW1610A_5VO2206DL02263, /dev/disk/by-path/pci-0000:00:10.0-ide-0:0
>  Device Number: block 33:0
>  Features: CD-R, CD-RW
>  Size: 0 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #25 (Unknown mass storage controller)
>  Drive Speed: 16
>
>49: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_2_if0
>  Unique ID: k4bc.oA+AiqMYeZA
>  Parent ID: 5n+q.S1sxJsLNxW6
>  SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-rc6-git7-3-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-rc6-git7-3-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:07.2"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #19 (USB Controller)
>
>50: USB 00.0: 10800 Keyboard
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if0_logicaldev_input
>  Unique ID: cLrx.iDDa63kSTH8
>  Parent ID: k4bc.oA+AiqMYeZA
>  SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0
>  SysFS BusID: 1-2:1.0
>  Hardware Class: keyboard
>  Model: "Cherry Mikroschalter Keyboard"
>  Hotplug: USB
>  Vendor: usb 0x046a "Cherry Mikroschalter GmbH"
>  Device: usb 0x0027 
>  Revision: "0.07"
>  Driver: "usbhid"
>  Device File: /dev/input/event2
>  Device Number: char 13:66
>  Speed: 1.5 Mbps
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #49 (Hub)
>
>51: USB 00.1: 0000 Unclassified device
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if1_logicaldev_input
>  Unique ID: 3X50.RKIkTbX2OK2
>  Parent ID: k4bc.oA+AiqMYeZA
>  SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.1
>  SysFS BusID: 1-2:1.1
>  Hardware Class: unknown
>  Model: "Cherry Mikroschalter Unclassified device"
>  Hotplug: USB
>  Vendor: usb 0x046a "Cherry Mikroschalter GmbH"
>  Device: usb 0x0027 
>  Revision: "0.07"
>  Driver: "usbhid"
>  Device File: /dev/input/event3
>  Device Number: char 13:67
>  Speed: 1.5 Mbps
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #49 (Hub)
>
>52: USB 00.2: 10503 USB Mouse
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_46a_27_noserial_if2_logicaldev_input
>  Unique ID: WiL4.BCep8RIGl_5
>  Parent ID: k4bc.oA+AiqMYeZA
>  SysFS ID: /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.2
>  SysFS BusID: 1-2:1.2
>  Hardware Class: mouse
>  Model: "Cherry Mikroschalter USB Mouse"
>  Hotplug: USB
>  Vendor: usb 0x046a "Cherry Mikroschalter GmbH"
>  Device: usb 0x0027 
>  Revision: "0.07"
>  Compatible to: int 0x0210 0x0015
>  Driver: "usbhid"
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event4
>  Device Number: char 13:63 (char 13:32)
>  Speed: 1.5 Mbps
>  Driver Info #0:
>    Buttons: 5
>    Wheels: 1
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #49 (Hub)
>
>53: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_07_3_if0
>  Unique ID: pBe4.Zv3m3b9Gbr1
>  Parent ID: y5Vg.S1sxJsLNxW6
>  SysFS ID: /devices/pci0000:00/0000:00:07.3/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-rc6-git7-3-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-rc6-git7-3-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:07.3"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #20 (USB Controller)
>
>54: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: Intel
>  Vendor: "AuthenticAMD"
>  Model: 6.4.4 "AMD Athlon(tm) processor"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,syscall,mmxext,3dnowext,3dnow
>  Clock: 1333 MHz
>  Cache: 256 kb
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>55: None 00.0: 10000 Monitor
>  [Created at fb.70]
>  Unique ID: rdCR.EY_qmtb9YY0
>  Hardware Class: monitor
>  Model: "Generic Monitor"
>  Vendor: "Generic"
>  Device: "Monitor"
>  Resolution: 1280x1024@77Hz
>  Driver Info #0:
>    Max. Resolution: 1280x1024
>    Vert. Sync Range: 50-90 Hz
>    Hor. Sync Range: 31-82 kHz
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>56: None 00.0: 10701 Ethernet
>  [Created at net.111]
>  UDI: /org/freedesktop/Hal/devices/net_00_09_5b_3b_b3_14
>  Unique ID: usDW.ndpeucax6V1
>  Parent ID: rBUF.wwk9OkfoCu6
>  SysFS ID: /class/net/eth0
>  SysFS Device Link: /devices/pci0000:00/0000:00:0a.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "orinoco"
>  Device File: eth0
>  HW Address: 00:09:5b:3b:b3:14
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #22 (WLAN controller)
>
>57: None 00.0: 10700 Loopback
>  [Created at net.111]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>58: None 00.0: 10781 Network Interface
>  [Created at net.111]
>  Unique ID: wl2P.nfEXJulusj6
>  SysFS ID: /class/net/sit0
>  Hardware Class: network interface
>  Model: "Network Interface"
>  Device File: sit0
>  Config Status: cfg=new, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 105573: 46534 | 46536 | 46537