Attachment 47042 Details for Bug 106028

dmesg after boot, before watching tv

dmesg (text/plain), 21.02 KB, created by Daniel Bertolo on 2005-08-22 22:07:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Bertolo

Created: 2005-08-22 22:07:07 UTC

Size: 21.02 KB

patch

obsolete

>Linux version 2.6.13-rc6-git7-3-smp (geeko@buildhost) (gcc version 4.0.2 20050812 (prerelease) (SUSE Linux)) #1 SMP Mon Aug 15 18:28:43 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
> BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
> BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 130864
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126768 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000f9fb0
>ACPI: XSDT (v001 A M I  OEMXSDT  0x05000306 MSFT 0x00000097) @ 0x1ff30100
>ACPI: FADT (v003 A M I  OEMFACP  0x05000306 MSFT 0x00000097) @ 0x1ff30290
>ACPI: MADT (v001 A M I  OEMAPIC  0x05000306 MSFT 0x00000097) @ 0x1ff30390
>ACPI: OEMB (v001 A M I  OEMBIOS  0x05000306 MSFT 0x00000097) @ 0x1ff40040
>ACPI: DSDT (v001  P4C81 P4C81061 0x00000061 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 20000000:dfb80000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda3 vga=0x31A selinux=0  splash=silent resume=/dev/sda2  splash=silent
>bootsplash: silent mode.
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 2399.303 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 511496k/523456k available (2322k kernel code, 11348k reserved, 769k data, 248k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4803.00 BogoMIPS (lpj=9606006)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>mtrr: v2.0 (20020519)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1605k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
>Parsing all Control Methods:......................................................................................................................................................
>Table [DSDT](id F004) - 507 Objects with 48 Devices 150 Methods 13 Regions
>ACPI Namespace successfully loaded at root c049ace0
>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
>CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4798.08 BogoMIPS (lpj=9596176)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
>Total of 2 processors activated (9601.09 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1024 [06] ev_create_gpe_block   : Found 9 Wake, Enabled 0 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:...............................................................................................................
>Initialized 12/13 Regions 42/42 Fields 41/41 Buffers 16/16 Packages (516 nodes)
>Executing all Device _STA and_INI methods:....................................................
>52 Devices found containing: 52 _STA, 0 _INI methods
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>EHCI early BIOS handoff failed (BIOS bug ?)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fbd00000-fddfffff
>  PREFETCH window: dab00000-faafffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fab00000-fabfffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
>pnp: 00:0a: ioport range 0x290-0x297 has been reserved
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1124747393.020:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>NET: Registered protocol family 1
>Starting balanced_irq
>Using IPI No-Shortcut mode
>ACPI wakeup devices: 
>P0P4 MC97 USB1 USB2 USB3 USB4 EUSB PS2K PS2M ILAN PWRB 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 248k freed
>SCSI subsystem initialized
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>libata version 1.11 loaded.
>logips2pp: Detected unknown logitech mouse model 56
>ata_piix version 1.03
>ata_piix: combined mode detected
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
>input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
>udev[965]: main: action, subsystem or devpath missing
>ata1: disabling port
>scsi0 : ata_piix
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15
>ata2: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:207f
>ata2: dev 0 ATA, max UDMA/133, 160086528 sectors:
>ata2: dev 0 configured for UDMA/133
>scsi1 : ata_piix
>  Vendor: ATA       Model: Maxtor 6Y080M0    Rev: YAR5
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4
>Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: sda3: found reiserfs format "3.6" with standard journal
>ReiserFS: sda3: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda3: checking transaction log (sda3)
>ReiserFS: sda3: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 1048816k swap on /dev/sda2.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ReiserFS: sda4: found reiserfs format "3.6" with standard journal
>ReiserFS: sda4: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda4: checking transaction log (sda4)
>ReiserFS: sda4: Using r5 hash to sort names
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c03be7a0(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (4089 buckets, 32712 max) - 248 bytes per conntrack
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 177, io base 0x0000eec0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x0000ef00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>shpchp: shpc_init : shpc_cap_offset == 0
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel i875 Chipset.
>agpgart: AGP aperture is 8M @ 0xfb000000
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000ef20
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000ef40
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hw_random hardware driver 1.0.0 loaded
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfdfffc00
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 5-2: new high speed USB device using ehci_hcd and address 2
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 201
>PCI: Via IRQ fixup for 0000:02:03.0, from 5 to 9
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[201]  MMIO=[fdeff800-fdefffff]  Max Packet=[2048]
>ACPI: PCI Interrupt 0000:02:0b.2[B] -> GSI 20 (level, low) -> IRQ 201
>ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[201]  MMIO=[fdefe800-fdefefff]  Max Packet=[2048]
>Linux video capture interface: v1.00
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 209
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 209
>eth0: 3Com Gigabit LOM (3C940)
>      PrefPort:A  RlmtMode:Check Link State
>i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0)
>tpm: module not supported by Novell, setting U taint flag.
>tpm_atmel: module not supported by Novell, setting U taint flag.
>tpm_nsc: module not supported by Novell, setting U taint flag.
>tpm_infineon: module not supported by Novell, setting U taint flag.
>tpm_inf 0000:00:1f.0: LPC-bus found at 0x24d0
>tpm_inf: probe of 0000:00:1f.0 failed with error -5
>gameport: EMU10K1 is pci0000:02:0b.1/gameport0, io 0xdfe0, speed 1269kHz
>ivtv_tveeprom: module not supported by Novell, setting U taint flag.
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>8139cp: pci dev 0000:02:09.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp: Try the "8139too" driver instead.
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 217
>eth1: RealTek RTL8139 at 0xe0c7a400, 00:00:e8:6a:f1:c3, IRQ 217
>eth1:  Identified 8139 chip type 'RTL-8139A'
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
>NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7676  Fri Jul 29 12:58:54 PDT 2005
>nvidiafb: module not supported by Novell, setting U taint flag.
>snd_ac97_bus: module not supported by Novell, setting U taint flag.
>ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 193
>ALSA sound/pci/emu10k1/emufx.c:1385: Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
>bttv: driver version 0.9.16 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 201
>bttv0: Bt878 (rev 17) at 0000:02:0c.0, irq: 201, latency: 64, mmio: 0xfabfe000
>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
>bttv0: using: Hauppauge (bt878) [card=10,insmod option]
>bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
>i2c-algo-bit.o: (0) scl=1, sda=1
>i2c-algo-bit.o: (1) scl=1, sda=0
>i2c-algo-bit.o: (2) scl=1, sda=1
>i2c-algo-bit.o: (3) scl=0, sda=1
>i2c-algo-bit.o: (4) scl=1, sda=1
>i2c-algo-bit.o: bt878 #0 [sw] passed test.
>tveeprom: Hauppauge: model = 44354, rev = C142, serial# = 2313130
>tveeprom: tuner = Temic 4009FR5 (idx = 42, type = 20)
>tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
>tveeprom: audio_processor = MSP3415 (type = 6)
>tveeprom: Hauppauge: model = 44354, rev = C142, serial# = 2313130
>tveeprom: tuner = Temic 4009FR5 (idx = 42, type = 20)
>tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
>tveeprom: audio_processor = MSP3415 (type = 6)
>bttv0: using tuner=20
>bttv0: i2c: checking for MSP34xx @ 0x80... found
>msp34xx: init: chip=MSP3415D-B3 +nicam +simple mode=simple
>msp3410: daemon started
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>tvaudio: TV audio decoder + audio/video mux driver
>tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z
>bttv0: i2c: checking for TDA9887 @ 0x86... not found
> : chip found @ 0xc2 (bt878 #0 [sw])
>tuner 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bttv0: PLL: 28636363 => 35468950 .. ok
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800001fdf55]
>ieee1394: Host added: ID:BUS[1-00:1023]  GUID[00023c009103424a]
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>NET: Registered protocol family 17
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>eth1: network connection up using port A
>    speed:           100
>    autonegotiation: yes
>    duplex mode:     half
>    flowctrl:        none
>    irq moderation:  disabled
>    scatter-gather:  enabled
>  Vendor: ICSI      Model: CF Card       CF  Rev: 1.3A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
>  Vendor: ICSI      Model: MS Card       MS  Rev: 1.3A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 1
>  Vendor: ICSI      Model: SD Card   MMC/SD  Rev: 1.3A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 2
>  Vendor: ICSI      Model: SM Card       SM  Rev: 1.3A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sde at scsi2, channel 0, id 0, lun 3
>usb-storage: device scan complete
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU1 updated from revision 0x11 to 0x2e, date = 08112004 
>microcode: CPU0 updated from revision 0x11 to 0x2e, date = 08112004 
>IA-32 Microcode Update Driver v1.14 unregistered
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: CPU0 (power states: C1[C1])
>ACPI: CPU1 (power states: C1[C1])
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>powernow: This module only works with AMD K7 CPUs
>eth1: no IPv6 routers present
>subfs 0.9
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>subfs: unsuccessful attempt to mount media (256)

Actions: View

Attachments on bug 106028: 47042 | 47044