Attachment 47086 Details for Bug 106604

"/var/log/messages" after ladt reboot

msgs.txt (text/plain), 14.85 KB, created by o.stoyke on 2005-08-23 08:04:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: o.stoyke

Created: 2005-08-23 08:04:41 UTC

Size: 14.85 KB

patch

obsolete

>Aug 23 08:51:01 rechner1 syslog-ng[3491]: syslog-ng version 1.6.8 starting
>Aug 23 08:51:02 rechner1 SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>Aug 23 08:51:02 rechner1 SuSEfirewall2: /var/lock/SuSEfirewall2.booting exists which means system boot in progress, exit.
>Aug 23 08:51:03 rechner1 SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>Aug 23 08:51:04 rechner1 SuSEfirewall2: /var/lock/SuSEfirewall2.booting exists which means system boot in progress, exit.
>Aug 23 08:51:06 rechner1 syslog-ng[3491]: Changing permissions on special file /dev/xconsole
>Aug 23 08:51:06 rechner1 syslog-ng[3491]: Changing permissions on special file /dev/tty10
>Aug 23 08:51:06 rechner1 ifup: No configuration found for sit0
>Aug 23 08:51:07 rechner1 kernel: klogd 1.4.1, log source = /proc/kmsg started.
>Aug 23 08:51:07 rechner1 kernel: parport: PnPBIOS parport detected.
>Aug 23 08:51:07 rechner1 kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>Aug 23 08:51:07 rechner1 kernel: lp0: using parport0 (interrupt-driven).
>Aug 23 08:51:07 rechner1 kernel: Adding 257000k swap on /dev/hda1.  Priority:-1 extents:1
>Aug 23 08:51:07 rechner1 kernel: Linux agpgart interface v0.101 (c) Dave Jones
>Aug 23 08:51:07 rechner1 kernel: agpgart: Detected an Intel 440BX Chipset.
>Aug 23 08:51:07 rechner1 kernel: agpgart: AGP aperture is 128M @ 0xe0000000
>Aug 23 08:51:07 rechner1 kernel: NET: Registered protocol family 10
>Aug 23 08:51:07 rechner1 kernel: Disabled Privacy Extensions on device c0371fe0(lo)
>Aug 23 08:51:07 rechner1 kernel: IPv6 over IPv4 tunneling driver
>Aug 23 08:51:07 rechner1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Aug 23 08:51:07 rechner1 kernel: shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
>Aug 23 08:51:07 rechner1 kernel: shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
>Aug 23 08:51:07 rechner1 kernel: usbcore: registered new driver usbfs
>Aug 23 08:51:07 rechner1 kernel: usbcore: registered new driver hub
>Aug 23 08:51:07 rechner1 kernel: USB Universal Host Controller Interface driver v2.3
>Aug 23 08:51:07 rechner1 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>Aug 23 08:51:07 rechner1 kernel: PCI: setting IRQ 10 as level-triggered
>Aug 23 08:51:07 rechner1 kernel: ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>Aug 23 08:51:07 rechner1 kernel: uhci_hcd 0000:00:04.2: UHCI Host Controller
>Aug 23 08:51:07 rechner1 kernel: uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
>Aug 23 08:51:07 rechner1 kernel: uhci_hcd 0000:00:04.2: irq 10, io base 0x0000d400
>Aug 23 08:51:07 rechner1 kernel: hub 1-0:1.0: USB hub found
>Aug 23 08:51:07 rechner1 kernel: hub 1-0:1.0: 2 ports detected
>Aug 23 08:51:07 rechner1 kernel: ip6_tables: (C) 2000-2002 Netfilter core team
>Aug 23 08:51:07 rechner1 kernel: e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
>Aug 23 08:51:07 rechner1 kernel: e100: Copyright(c) 1999-2005 Intel Corporation
>Aug 23 08:51:07 rechner1 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>Aug 23 08:51:07 rechner1 kernel: PCI: setting IRQ 11 as level-triggered
>Aug 23 08:51:07 rechner1 kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>Aug 23 08:51:07 rechner1 kernel: e100: eth0: e100_probe: addr 0xdb800000, irq 11, MAC addr 00:02:B3:41:63:79
>Aug 23 08:51:07 rechner1 kernel: piix4_smbus 0000:00:04.3: Found 0000:00:04.3 device
>Aug 23 08:51:07 rechner1 kernel: ip_tables: (C) 2000-2002 Netfilter core team
>Aug 23 08:51:07 rechner1 kernel: ip_conntrack version 2.1 (3071 buckets, 24568 max) - 248 bytes per conntrack
>Aug 23 08:51:07 rechner1 kernel: bootsplash: status on console 0 changed to on
>Aug 23 08:51:07 rechner1 kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>Aug 23 08:51:07 rechner1 kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Aug 23 08:51:08 rechner1 mDNSResponder (Engineering Build) (Aug 13 2005 00:38:59) [4064]: starting
>Aug 23 08:51:08 rechner1 mDNSResponder: Unable to parse DNS server list. Unicast DNS-SD unavailable
>Aug 23 08:51:08 rechner1 kernel: bootsplash: status on console 0 changed to on
>Aug 23 08:51:10 rechner1 kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>Aug 23 08:51:11 rechner1 kernel: ACPI: Power Button (FF) [PWRF]
>Aug 23 08:51:11 rechner1 kernel: ACPI: Power Button (CM) [PWRB]
>Aug 23 08:51:12 rechner1 kernel: microcode: CPU0 already at revision 0xe (current=0xe)
>Aug 23 08:51:12 rechner1 kernel: microcode: No new microcode data for CPU0
>Aug 23 08:51:12 rechner1 kernel: IA-32 Microcode Update Driver v1.14 unregistered
>Aug 23 08:51:12 rechner1 ntpdate[4257]: step time server 192.168.1.1 offset -0.486717 sec
>Aug 23 08:51:13 rechner1 ntpd[4303]: ntpd 4.2.0a@1.1191-r Sat Aug 13 02:09:48 UTC 2005 (1)
>Aug 23 08:51:13 rechner1 ntpd[4303]: precision = 2.000 usec
>Aug 23 08:51:13 rechner1 ntpd[4303]: Listening on interface wildcard, 0.0.0.0#123
>Aug 23 08:51:13 rechner1 ntpd[4303]: Listening on interface wildcard, ::#123
>Aug 23 08:51:13 rechner1 ntpd[4303]: Listening on interface lo, 127.0.0.1#123
>Aug 23 08:51:13 rechner1 ntpd[4303]: Listening on interface eth0, 192.168.1.2#123
>Aug 23 08:51:13 rechner1 ntpd[4303]: kernel time sync status 0040
>Aug 23 08:51:13 rechner1 kernel: eth0: no IPv6 routers present
>Aug 23 08:51:14 rechner1 ntpd[4303]: frequency initialized 188.431 PPM from /var/lib/ntp/drift/ntp.drift
>Aug 23 08:51:15 rechner1 kernel: powernow: This module only works with AMD K7 CPUs
>Aug 23 08:51:15 rechner1 sshd[4388]: Server listening on :: port 22.
>Aug 23 08:51:16 rechner1 rcpowersaved: CPU frequency scaling is not supported by your processor.
>Aug 23 08:51:16 rechner1 rcpowersaved: enter 'CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
>Aug 23 08:51:16 rechner1 rcpowersaved: Cannot load cpufreq governors - No cpufreq driver available
>Aug 23 08:51:17 rechner1 hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
>Aug 23 08:51:18 rechner1 [powersave]: ERROR (CPUFreq_Kernel:21) Could not set ondemand governor, seems as if the cpufreq_ondemand module is not loaded.
>Aug 23 08:51:18 rechner1 [powersave]: ERROR (PM_Interface:234) Cannot create cpufreq objects
>Aug 23 08:51:18 rechner1 [powersave]: WARNING (initHal:59) could not init hal library: (null)
>Aug 23 08:51:21 rechner1 [powersave]: WARNING (filter_function:250) Received message from invalid interface
>Aug 23 08:51:21 rechner1 [powersave]: WARNING (filter_function:250) Received message from invalid interface
>Aug 23 08:51:29 rechner1 /usr/sbin/cron[4642]: (CRON) STARTUP (V5.0)
>Aug 23 08:51:30 rechner1 SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>Aug 23 08:51:30 rechner1 SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
>Aug 23 08:51:31 rechner1 SuSEfirewall2: batch committing...
>Aug 23 08:51:31 rechner1 SuSEfirewall2: Firewall rules successfully set
>Aug 23 08:51:31 rechner1 kernel: bootsplash: status on console 0 changed to on
>Aug 23 08:51:31 rechner1 kernel: bootsplash: status on console 0 changed to on
>Aug 23 08:51:39 rechner1 hal-subfs-mount[4943]: By hald-subfs-mount created dir /media/floppy got removed.
>Aug 23 08:51:39 rechner1 hal-subfs-mount[4943]: By hald-subfs-mount created dir /media/MOVING_CHIP got removed.
>Aug 23 08:51:39 rechner1 kernel: subfs 0.9
>Aug 23 08:51:39 rechner1 hal-subfs-mount[4943]: registered at resmgrd and called(0) /bin/mount -t subfs -o fs=floppyfss,sync,procuid,nosuid,nodev,exec /dev/fd0 "/media/floppy" 
>Aug 23 08:51:40 rechner1 kernel: end_request: I/O error, dev fd0, sector 0
>Aug 23 08:51:40 rechner1 kernel: end_request: I/O error, dev fd0, sector 0
>Aug 23 08:51:40 rechner1 kernel: end_request: I/O error, dev fd0, sector 0
>Aug 23 08:51:41 rechner1 submountd: mount failure, No such device or address
>Aug 23 08:51:41 rechner1 kernel: end_request: I/O error, dev fd0, sector 0
>Aug 23 08:51:41 rechner1 kernel: subfs: unsuccessful attempt to mount media (256)
>Aug 23 08:53:05 rechner1 kernel: input.c: calling hotplug without a hotplug agent defined
>Aug 23 08:53:05 rechner1 kernel: input.c: calling hotplug without a hotplug agent defined
>Aug 23 08:53:05 rechner1 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
>Aug 23 08:53:23 rechner1 PAM-devperm[4557]: opendir(/dev/snd/*): Datei oder Verzeichnis nicht gefunden
>Aug 23 08:53:25 rechner1 gconfd (ostoyke-5052): (Version 2.11.90) wird gestartet, Prozesskennung 5052, Benutzer Â»ostoykeÂ«
>Aug 23 08:53:26 rechner1 gconfd (ostoyke-5052): Die Adresse Â»xml:readonly:/etc/opt/gnome/gconf/gconf.xml.mandatoryÂ« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelÃ¶st
>Aug 23 08:53:26 rechner1 gconfd (ostoyke-5052): Die Adresse Â»xml:readwrite:/home/ostoyke/.gconfÂ« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelÃ¶st
>Aug 23 08:53:26 rechner1 gconfd (ostoyke-5052): Die Adresse Â»xml:readonly:/etc/opt/gnome/gconf/gconf.xml.defaultsÂ« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelÃ¶st
>Aug 23 08:53:48 rechner1 gconfd (ostoyke-5052): Die Adresse Â»xml:readwrite:/home/ostoyke/.gconfÂ« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelÃ¶st
>Aug 23 08:54:45 rechner1 kernel: usb 1-1: new full speed USB device using uhci_hcd and address 2
>Aug 23 08:54:45 rechner1 kernel: SCSI subsystem initialized
>Aug 23 08:54:45 rechner1 kernel: Initializing USB Mass Storage driver...
>Aug 23 08:54:45 rechner1 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
>Aug 23 08:54:45 rechner1 kernel: usb-storage: device found at 2
>Aug 23 08:54:45 rechner1 kernel: usb-storage: waiting for device to settle before scanning
>Aug 23 08:54:45 rechner1 kernel: usbcore: registered new driver usb-storage
>Aug 23 08:54:45 rechner1 kernel: USB Mass Storage support registered.
>Aug 23 08:54:50 rechner1 kernel:   Vendor: JetFlash  Model: TS256MJF2A        Rev: 1.00
>Aug 23 08:54:50 rechner1 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
>Aug 23 08:54:50 rechner1 kernel: usb-storage: device scan complete
>Aug 23 08:54:50 rechner1 kernel: SCSI device sda: 501800 512-byte hdwr sectors (257 MB)
>Aug 23 08:54:50 rechner1 kernel: sda: Write Protect is off
>Aug 23 08:54:50 rechner1 kernel: sda: Mode Sense: 0b 00 00 08
>Aug 23 08:54:50 rechner1 kernel: sda: assuming drive cache: write through
>Aug 23 08:54:50 rechner1 kernel: SCSI device sda: 501800 512-byte hdwr sectors (257 MB)
>Aug 23 08:54:50 rechner1 kernel: sda: Write Protect is off
>Aug 23 08:54:50 rechner1 kernel: sda: Mode Sense: 0b 00 00 08
>Aug 23 08:54:50 rechner1 kernel: sda: assuming drive cache: write through
>Aug 23 08:54:50 rechner1 kernel:  sda: sda1
>Aug 23 08:54:50 rechner1 kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
>Aug 23 08:54:51 rechner1 hal-subfs-mount[5239]: registered at resmgrd and called(0) /bin/mount -t subfs -o fs=floppyfss,sync,procuid,nosuid,nodev,exec,utf8=true /dev/sda1 "/media/MOVING_CHIP" 
>Aug 23 08:55:24 rechner1 kernel: usb 1-1: USB disconnect, address 2
>Aug 23 08:55:24 rechner1 resmgr[3496]: set_facl() - ACL error on /dev/sda1, acl_set_file: No such file or directory
>Aug 23 08:55:24 rechner1 hal-subfs-mount[5282]: Mount point /media/MOVING_CHIP got removed.
>Aug 23 08:55:37 rechner1 kernel: usb 1-1: new full speed USB device using uhci_hcd and address 3
>Aug 23 08:55:37 rechner1 kernel: scsi1 : SCSI emulation for USB Mass Storage devices
>Aug 23 08:55:37 rechner1 kernel: usb-storage: device found at 3
>Aug 23 08:55:37 rechner1 kernel: usb-storage: waiting for device to settle before scanning
>Aug 23 08:55:42 rechner1 kernel:   Vendor: JetFlash  Model: TS256MJF2A        Rev: 1.00
>Aug 23 08:55:42 rechner1 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
>Aug 23 08:55:42 rechner1 kernel: SCSI device sda: 501800 512-byte hdwr sectors (257 MB)
>Aug 23 08:55:42 rechner1 kernel: sda: Write Protect is off
>Aug 23 08:55:42 rechner1 kernel: sda: Mode Sense: 0b 00 00 08
>Aug 23 08:55:42 rechner1 kernel: sda: assuming drive cache: write through
>Aug 23 08:55:42 rechner1 kernel: SCSI device sda: 501800 512-byte hdwr sectors (257 MB)
>Aug 23 08:55:42 rechner1 kernel: sda: Write Protect is off
>Aug 23 08:55:42 rechner1 kernel: sda: Mode Sense: 0b 00 00 08
>Aug 23 08:55:42 rechner1 kernel: sda: assuming drive cache: write through
>Aug 23 08:55:42 rechner1 kernel:  sda: sda1
>Aug 23 08:55:42 rechner1 kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
>Aug 23 08:55:42 rechner1 kernel: usb-storage: device scan complete
>Aug 23 08:55:43 rechner1 hal-subfs-mount[5336]: registered at resmgrd and called(0) /bin/mount -t subfs -o fs=floppyfss,sync,procuid,nosuid,nodev,exec,utf8=true /dev/sda1 "/media/MOVING_CHIP" 
>Aug 23 08:55:46 rechner1 kernel: usb 1-1: USB disconnect, address 3
>Aug 23 08:55:46 rechner1 resmgr[3496]: set_facl() - ACL error on /dev/sda1, acl_set_file: No such file or directory
>Aug 23 08:55:46 rechner1 hal-subfs-mount[5360]: Mount point /media/MOVING_CHIP got removed.
>Aug 23 09:51:03 rechner1 syslog-ng[3491]: STATS: dropped 0
>Aug 23 09:58:10 rechner1 kernel: input.c: calling hotplug without a hotplug agent defined
>Aug 23 09:58:10 rechner1 kernel: input.c: calling hotplug without a hotplug agent defined
>Aug 23 09:58:10 rechner1 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
>Aug 23 10:00:05 rechner1 kernel: usb 1-1: new full speed USB device using uhci_hcd and address 4
>Aug 23 10:00:05 rechner1 kernel: scsi2 : SCSI emulation for USB Mass Storage devices
>Aug 23 10:00:05 rechner1 kernel: usb-storage: device found at 4
>Aug 23 10:00:05 rechner1 kernel: usb-storage: waiting for device to settle before scanning
>Aug 23 10:00:10 rechner1 kernel:   Vendor: JetFlash  Model: TS256MJF2A        Rev: 1.00
>Aug 23 10:00:10 rechner1 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
>Aug 23 10:00:10 rechner1 kernel: SCSI device sda: 501800 512-byte hdwr sectors (257 MB)
>Aug 23 10:00:10 rechner1 kernel: sda: Write Protect is off
>Aug 23 10:00:10 rechner1 kernel: sda: Mode Sense: 0b 00 00 08
>Aug 23 10:00:10 rechner1 kernel: sda: assuming drive cache: write through
>Aug 23 10:00:10 rechner1 kernel: SCSI device sda: 501800 512-byte hdwr sectors (257 MB)
>Aug 23 10:00:10 rechner1 kernel: sda: Write Protect is off
>Aug 23 10:00:10 rechner1 kernel: sda: Mode Sense: 0b 00 00 08
>Aug 23 10:00:10 rechner1 kernel: sda: assuming drive cache: write through
>Aug 23 10:00:10 rechner1 kernel:  sda: sda1
>Aug 23 10:00:10 rechner1 kernel: Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
>Aug 23 10:00:10 rechner1 kernel: usb-storage: device scan complete
>Aug 23 10:00:11 rechner1 hal-subfs-mount[6121]: registered at resmgrd and called(0) /bin/mount -t subfs -o fs=floppyfss,sync,procuid,nosuid,nodev,exec,utf8=true /dev/sda1 "/media/MOVING_CHIP" 
>Aug 23 10:00:14 rechner1 kernel: usb 1-1: USB disconnect, address 4
>Aug 23 10:00:14 rechner1 resmgr[3496]: set_facl() - ACL error on /dev/sda1, acl_set_file: No such file or directory

Actions: View

Attachments on bug 106604: 47073 | 47084 | 47086