Attachment 47483 Details for Bug 112896

System logfile after booting with acpi = oldboot (system freezes)

Freeze_ACPIoldboot.txt (text/plain), 12.92 KB, created by Uwe Köhler on 2005-08-25 08:08:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Uwe Köhler

Created: 2005-08-25 08:08:44 UTC

Size: 12.92 KB

patch

obsolete

>Aug 25 08:33:28 linux syslog-ng[4613]: syslog-ng version 1.6.8 starting
>Aug 25 08:33:29 linux SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>Aug 25 08:33:29 linux SuSEfirewall2: /var/lock/SuSEfirewall2.booting exists which means system boot in progress, exit.
>Aug 25 08:33:30 linux modify_resolvconf: Service dhcpcd modified /etc/resolv.conf. See info block in this file
>Aug 25 08:33:30 linux syslog-ng[4613]: Changing permissions on special file /dev/xconsole
>Aug 25 08:33:30 linux syslog-ng[4613]: Changing permissions on special file /dev/tty10
>Aug 25 08:33:30 linux mDNSResponder (Engineering Build) (Aug 12 2005 21:44:08) [5161]: starting
>Aug 25 08:33:33 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
>Aug 25 08:33:33 linux kernel: parport0: PC-style at 0x378 [PCSPP]
>Aug 25 08:33:33 linux kernel: lp0: using parport0 (polling).
>Aug 25 08:33:33 linux kernel: NET: Registered protocol family 10
>Aug 25 08:33:33 linux kernel: Disabled Privacy Extensions on device ffffffff80474280(lo)
>Aug 25 08:33:33 linux kernel: IPv6 over IPv4 tunneling driver
>Aug 25 08:33:33 linux kernel: ip6_tables: (C) 2000-2002 Netfilter core team
>Aug 25 08:33:33 linux kernel: ip_tables: (C) 2000-2002 Netfilter core team
>Aug 25 08:33:33 linux kernel: ip_conntrack version 2.1 (8192 buckets, 65536 max) - 304 bytes per conntrack
>Aug 25 08:33:33 linux kernel: hw_random: AMD768 system management I/O registers at 0x5000.
>Aug 25 08:33:33 linux kernel: hw_random hardware driver 1.0.0 loaded
>Aug 25 08:33:33 linux kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Aug 25 08:33:33 linux kernel: tpm: module not supported by Novell, setting U taint flag.
>Aug 25 08:33:33 linux kernel: shpchp: HPC vendor_id 1022 device_id 7455 ss_vid 0 ss_did 0
>Aug 25 08:33:33 linux kernel: shpchp: shpc_init: cannot reserve MMIO region
>Aug 25 08:33:33 linux kernel: shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0
>Aug 25 08:33:33 linux kernel: shpchp: shpc_init: cannot reserve MMIO region
>Aug 25 08:33:33 linux kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Aug 25 08:33:33 linux kernel: tpm_atmel: module not supported by Novell, setting U taint flag.
>Aug 25 08:33:33 linux kernel: tpm_nsc: module not supported by Novell, setting U taint flag.
>Aug 25 08:33:33 linux kernel: snd_ac97_bus: module not supported by Novell, setting U taint flag.
>Aug 25 08:33:34 linux kernel: ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 177
>Aug 25 08:33:34 linux kernel: usbcore: registered new driver usbfs
>Aug 25 08:33:34 linux kernel: usbcore: registered new driver hub
>Aug 25 08:33:34 linux kernel: ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>Aug 25 08:33:34 linux kernel: Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI
>Aug 25 08:33:34 linux kernel: Copyright (c) 1999-2005 Intel Corporation.
>Aug 25 08:33:34 linux kernel: USB Universal Host Controller Interface driver v2.3
>Aug 25 08:33:34 linux kernel: nvidiafb: module not supported by Novell, setting U taint flag.
>Aug 25 08:33:34 linux ifup: No configuration found for sit0
>Aug 25 08:33:34 linux rcpowersaved: enter 'powernow_k8' into CPUFREQD_MODULE in /etc/sysconfig/powersave/cpufreq.
>Aug 25 08:33:34 linux kernel: ieee1394: Initialized config rom entry `ip1394'
>Aug 25 08:33:34 linux rcpowersaved: this will speed up starting powersaved and avoid unnecessary warnings in syslog.
>Aug 25 08:33:34 linux kernel: intel8x0_measure_ac97_clock: measured 58717 usecs
>Aug 25 08:33:34 linux kernel: intel8x0: clocking to 48000
>Aug 25 08:33:34 linux kernel: ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 169
>Aug 25 08:33:34 linux kernel: ohci_hcd 0000:01:00.0: OHCI Host Controller
>Aug 25 08:33:34 linux kernel: ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
>Aug 25 08:33:34 linux kernel: ohci_hcd 0000:01:00.0: irq 169, io mem 0xfa9fd000
>Aug 25 08:33:34 linux kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 185
>Aug 25 08:33:34 linux kernel: PCI: Unable to reserve mem region #2:10000000@d0000000 for device 0000:02:00.0
>Aug 25 08:33:34 linux kernel: nvidiafb: cannot request PCI regions
>Aug 25 08:33:34 linux kernel: ACPI: PCI interrupt for device 0000:02:00.0 disabled
>Aug 25 08:33:34 linux kernel: hub 1-0:1.0: USB hub found
>Aug 25 08:33:34 linux kernel: hub 1-0:1.0: 3 ports detected
>Aug 25 08:33:34 linux kernel: ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 169
>Aug 25 08:33:34 linux kernel: ohci_hcd 0000:01:00.1: OHCI Host Controller
>Aug 25 08:33:34 linux kernel: ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
>Aug 25 08:33:34 linux kernel: ohci_hcd 0000:01:00.1: irq 169, io mem 0xfa9fe000
>Aug 25 08:33:34 linux kernel: hub 2-0:1.0: USB hub found
>Aug 25 08:33:34 linux kernel: hub 2-0:1.0: 3 ports detected
>Aug 25 08:33:34 linux kernel: ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18 (level, low) -> IRQ 193
>Aug 25 08:33:34 linux kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>Aug 25 08:33:35 linux kernel: ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 17 (level, low) -> IRQ 177
>Aug 25 08:33:35 linux kernel: PCI: Via IRQ fixup for 0000:01:0b.0, from 9 to 1
>Aug 25 08:33:35 linux kernel: uhci_hcd 0000:01:0b.0: UHCI Host Controller
>Aug 25 08:33:35 linux kernel: uhci_hcd 0000:01:0b.0: new USB bus registered, assigned bus number 3
>Aug 25 08:33:35 linux kernel: uhci_hcd 0000:01:0b.0: irq 177, io base 0x0000a400
>Aug 25 08:33:35 linux kernel: hub 3-0:1.0: USB hub found
>Aug 25 08:33:35 linux kernel: hub 3-0:1.0: 2 ports detected
>Aug 25 08:33:35 linux kernel: ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>Aug 25 08:33:35 linux kernel: ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 17 (level, low) -> IRQ 177
>Aug 25 08:33:35 linux kernel: PCI: Via IRQ fixup for 0000:01:0a.0, from 9 to 1
>Aug 25 08:33:35 linux kernel: ACPI: PCI Interrupt 0000:01:0b.1[B] -> GSI 18 (level, low) -> IRQ 193
>Aug 25 08:33:35 linux kernel: PCI: Via IRQ fixup for 0000:01:0b.1, from 5 to 1
>Aug 25 08:33:35 linux kernel: uhci_hcd 0000:01:0b.1: UHCI Host Controller
>Aug 25 08:33:35 linux kernel: uhci_hcd 0000:01:0b.1: new USB bus registered, assigned bus number 4
>Aug 25 08:33:35 linux kernel: uhci_hcd 0000:01:0b.1: irq 193, io base 0x0000a800
>Aug 25 08:33:35 linux kernel: hub 4-0:1.0: USB hub found
>Aug 25 08:33:35 linux kernel: hub 4-0:1.0: 2 ports detected
>Aug 25 08:33:35 linux kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177]  MMIO=[fa9ff000-fa9ff7ff]  Max Packet=[2048]
>Aug 25 08:33:35 linux kernel: ACPI: PCI Interrupt 0000:01:0b.2[C] -> GSI 19 (level, low) -> IRQ 169
>Aug 25 08:33:35 linux kernel: PCI: Via IRQ fixup for 0000:01:0b.2, from 10 to 9
>Aug 25 08:33:35 linux kernel: ehci_hcd 0000:01:0b.2: EHCI Host Controller
>Aug 25 08:33:35 linux kernel: ehci_hcd 0000:01:0b.2: new USB bus registered, assigned bus number 5
>Aug 25 08:33:35 linux kernel: ehci_hcd 0000:01:0b.2: irq 169, io mem 0xfa9ff800
>Aug 25 08:33:35 linux kernel: ehci_hcd 0000:01:0b.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>Aug 25 08:33:35 linux kernel: hub 5-0:1.0: USB hub found
>Aug 25 08:33:35 linux kernel: hub 5-0:1.0: 4 ports detected
>Aug 25 08:33:35 linux kernel: ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0810000307c77]
>Aug 25 08:33:35 linux kernel: BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>Aug 25 08:33:35 linux kernel: e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
>Aug 25 08:33:35 linux kernel: NET: Registered protocol family 17
>Aug 25 08:33:35 linux kernel: grep[5154]: segfault at 0000000000000000 rip 00002aaaaaaae05c rsp 00007fffff949390 error 4
>Aug 25 08:33:35 linux kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>Aug 25 08:33:35 linux kernel: ACPI: Power Button (FF) [PWRF]
>Aug 25 08:33:35 linux kernel: ACPI: Power Button (CM) [PWRB]
>Aug 25 08:33:35 linux kernel: microcode: CPU0 not a capable Intel processor
>Aug 25 08:33:35 linux kernel: microcode: CPU1 not a capable Intel processor
>Aug 25 08:33:35 linux kernel: microcode: No new microcode data for CPU0
>Aug 25 08:33:35 linux kernel: microcode: No new microcode data for CPU1
>Aug 25 08:33:35 linux kernel: IA-32 Microcode Update Driver v1.14 unregistered
>Aug 25 08:33:35 linux kernel: powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.3)
>Aug 25 08:33:35 linux kernel: powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
>Aug 25 08:33:35 linux kernel: powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
>Aug 25 08:33:35 linux kernel: powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
>Aug 25 08:33:35 linux kernel: powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0xe (1200 mV)
>Aug 25 08:33:35 linux kernel: cpu_init done, current fid 0xe, vid 0x2
>Aug 25 08:33:35 linux kernel: powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
>Aug 25 08:33:35 linux kernel: powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
>Aug 25 08:33:34 linux sshd[5522]: Server listening on :: port 22.
>Aug 25 08:33:35 linux kernel: powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
>Aug 25 08:33:35 linux kernel: powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0xe (1200 mV)
>Aug 25 08:33:35 linux kernel: cpu_init done, current fid 0xe, vid 0x2
>Aug 25 08:33:35 linux kernel: limiting to cpu 2 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 3 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 4 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 5 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 6 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 7 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 8 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 9 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 10 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 11 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 12 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 13 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 14 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 15 failed
>Aug 25 08:33:35 linux hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
>Aug 25 08:33:35 linux kernel: limiting to cpu 16 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 17 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 18 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 19 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 20 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 21 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 22 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 23 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 24 failed
>Aug 25 08:33:35 linux kernel: limiting to cpu 25 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 26 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 27 failed
>Aug 25 08:33:36 linux [powersave]: WARNING (initHal:59) could not init hal library: (null)
>Aug 25 08:33:36 linux kernel: limiting to cpu 28 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 29 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 30 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 31 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 32 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 33 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 34 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 35 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 36 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 37 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 38 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 39 failed
>Aug 25 08:33:36 linux kernel: limiting to cpu 40 failed
>Aug 25 08:33:37 linux kernel: limiting to cpu 41 failed
>Aug 25 08:33:37 linux kernel: limiting to cpu 42 failed
>Aug 25 08:33:37 linux kernel: limiting to cpu 43 failed
>Aug 25 08:33:37 linux kernel: limiting to cpu 44 failed
>Aug 25 08:33:37 linux [powersave]: WARNING (filter_function:250) Received message from invalid interface
>Aug 25 08:33:37 linux kernel: limiting to cpu 45 failed
>Aug 25 08:33:37 linux /usr/sbin/cron[5641]: (CRON) STARTUP (V5.0)
>Aug 25 08:33:37 linux [powersave]: WARNING (filter_function:250) Received message from invalid interface
>Aug 25 08:33:37 linux kernel: limiting to cpu 46 failed
>Aug 25 08:33:37 linux kernel: limiting to cpu 47 failed
>Aug 25 08:33:37 linux kernel: limiting to cpu 48 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 49 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 50 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 51 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 52 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 53 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 54 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 55 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 56 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 57 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 58 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 59 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 60 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 61 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 62 failed
>Aug 25 08:33:38 linux kernel: limiting to cpu 63 failed

Actions: View

Attachments on bug 112896: 47480 | 47481 | 47482 | 47483 | 47745 | 62040 | 62041 | 62042