Attachment 47534 Details for Bug 112929

log with run_parallel=no

screenlog.0 (text/plain), 26.32 KB, created by Steffen Winterfeldt on 2005-08-25 12:28:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Steffen Winterfeldt

Created: 2005-08-25 12:28:31 UTC

Size: 26.32 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/sda1 vga=0x317 selinux=0    resume=/dev/sda2  splash=silent console=ttyS0,115200)
>Linux version 2.6.13-rc6-git13-4-smp (geeko@buildhost) (gcc version 4.0.2 20050818 (prerelease) (SUSE Linux)) #1 SMP Mon Aug 22 18:38:22 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff4000 (usable)
> BIOS-e820: 000000003fff4000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003fff4000
>Bootmem setup node 0 0000000000000000-000000003fff4000
>ACPI: PM-Timer IO Port: 0xf808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 40000000:90000000)
>Checking aperture...
>Built 1 zonelists
>Kernel command line: root=/dev/sda1 vga=0x317 selinux=0    resume=/dev/sda2  splash=silent console=ttyS0,115200
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 3400.289 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Memory: 1019144k/1048528k available (2506k kernel code, 0k reserved, 1361k data, 212k init)
>Calibrating delay using timer specific routine.. 6810.63 BogoMIPS (lpj=13621269)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>mtrr: v2.0 (20020519)
>checking if image is initramfs... it is
>ACPI: Looking for DSDT in initrd... not found!
> not found!
> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
>Parsing all Control Methods:.............................................................................
>Table [DSDT](id F005) - 230 Objects with 25 Devices 77 Methods 22 Regions
>Parsing all Control Methods:.........................................................................................
>Table [SSDT](id F003) - 341 Objects with 25 Devices 89 Methods 9 Regions
>ACPI Namespace successfully loaded at root ffffffff8056cd80
>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>Detected 12.500 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6800.80 BogoMIPS (lpj=13601603)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU1: Thermal monitoring enabled (TM1)
>              Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 04
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff -114 cycles, maxerr 926 cycles)
>Brought up 2 CPUs
>time.c: Using PIT/TSC based timekeeping.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at d0000000
>ACPI: Subsystem revision 20050408
>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1024 [06] ev_create_gpe_block   : Found 8 Wake, Enabled 0 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:...............................................................................
>Initialized 31/31 Regions 0/0 Fields 43/43 Buffers 5/19 Packages (580 nodes)
>Executing all Device _STA and_INI methods:......................................................
>54 Devices found containing: 54 _STA, 2 _INI methods
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f1000000-f31fffff
>  PREFETCH window: e0000000-f01fffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: f0200000-f04fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>evregion-0423: *** Error: Handler for [SystemMemory] returned AE_AML_ALIGNMENT
> psparse-1172: *** Error: Method execution failed [\_SB_.MBRD._CRS] (Node ffff81000262cb30), AE_AML_ALIGNMENT
>  uteval-0171: *** Error: Method execution failed [\_SB_.MBRD._CRS] (Node ffff81000262cb30), AE_AML_ALIGNMENT
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1124972664.192:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>assign_interrupt_mode Found MSI capability
>pcie_portdrv_probe->Dev[2660:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177
>assign_interrupt_mode Found MSI capability
>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20010100000, using 6144k, total 65536k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 72942 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>PCI0 PEG1 PCX1 PCX2 PCX4  HUB COM1 USB1 USB2 USB3 USB4 EUSB PBTN 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 212k freed
>Starting udev
>Creating devices
>Loading kernel/drivers/scsi/scsi_mod.ko
>SCSI subsystem initialized
>udev[1004]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Loading kernel/dudev[1008]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>rivers/scsi/sd_mod.ko
>udev[1014]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Loading kernel/drivers/ide/ide-cudev[1018]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ore.ko
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Loading kernel/drivers/ide/pci/piix.ko
>udev[1028]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1029]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ICH6: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 217
>ICH6: chipset revision 3
>ICH6: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x14e0-0x14e7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x14e8-0x14ef, BIOS settings: hdc:pio, hdd:pio
>udev[1033]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1035]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>input: PS/2 Generic Mouse on isa0060/serio1
>udev[1036]: main: action, subsystem or devpath missing
>hda: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>udev[1040]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Loading kernel/drivers/scsi/libata.ko
>udev[1048]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Loading kernel/dudev[1052]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>rivers/scsi/ahciacpi_bus-0212 .ko
>[01] acpi_bus_set_power    : <3>udev[1057]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 177
>ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x1 impl IDE mode
>ahci(0000:00:1f.2) flags: 64bit ncq pm led slum part 
>ata1: SATA max UDMA/133 cmd 0xFFFFC2000001A500 ctl 0x0 bmdma 0x0 irq 177
>ata2: SATA max UDMA/133 cmd 0xFFFFC2000001A580 ctl 0x0 bmdma 0x0 irq 177
>ata3: SATA max UDMA/133 cmd 0xFFFFC2000001A600 ctl 0x0 bmdma 0x0 irq 177
>ata4: SATA max UDMA/133 cmd 0xFFFFC2000001A680 ctl 0x0 bmdma 0x0 irq 177
>ata1: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
>ata1: dev 0 configured for UDMA/133
>scsi0 : ahci
>udev[1064]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata2: no device found (phy stat 00000000)
>scsi1 : ahci
>udev[1067]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata3: no device found (phy stat 00000000)
>scsi2 : ahci
>udev[1070]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata4: no device found (phy stat 00000000)
>scsi3 : ahci
>  Vendor: ATA       Model: WDC WD740GD-50FL  Rev: <3>udev[1073]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>27.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>Loading kernel/drivers/scsi/ata_piix.ko
>udev[1095]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1096]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Loading kernel/dudev[1100]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>rivers/acpi/procACPI: CPU0 (power states:es sor.ko
>C1[C1])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: CPU1 (power states: C1[C1])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Loading kernel/drivers/acpi/thermal.ko
>udev[1112]: run_program: exec of program '/sbin/modprobe' failed
>udev[1113]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1114]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1117]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Loading kernel/drivers/acpi/fan.udev[1076]: import_file_into_env: can't open '/sbin/path_id /block/sda'
>ko
>udev[1123]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Loading kernel/drivers/ide/ide-disk.ko
>udev[1132]:Loading kernel/drivers/cdrom/cdrom.ko
> run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1133]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1137]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Loading kernel/drivers/ide/ide-cd.ko
>udev[1147]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1148]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>hda: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(44)
>Uniform CD-ROM driver Revision: 3.20
>udev[1152]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Loading kernel/fs/reiserfs/reiseudev[1157]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>rfs.ko
>Waiting for device /dev/sda1 to appear: udev[1161]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1149]: import_file_into_env: can't open '/sbin/path_id /block/hda'
>udev[1162]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1163]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1164]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1165]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>. ok
>rootfs:  major=8 minor=1 devn=2049
>fsck 1.38 (30-Jun-2005)
>Reiserfs super block in block 16 on 0x801 of format 3.6 with standard journal
>Blocks (total/free): 2622592/1120970 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/sda1' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>fsck succeeded. Mounting root device read-write.
>Mounting root /dev/sda1
>ReiserFS: sda1: found reiserfs format "3.6" with standard journal
>ReiserFS: sda1: using ordered data mode
>ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda1: checking transaction log (sda1)
>ReiserFS: sda1: Using r5 hash to sort names
>
INIT: version 2.85 booting

>System Boot Control: Running /etc/init.d/boot
>Mounting /proc filesystem7[?25l
[80C[10D[1;32mdone[m8[?25h
>Mounting sysfs on /sys7[?25l
[80C[10D[1;32mdone[m8[?25h
>Mounting /dev/pts7[?25l
[80C[10D[1;32mdone[m8[?25h
>
Boot logging started on /dev/ttyS0(/dev/console) at Thu Aug 25 14:24:34 2005

>[m[?25hConfiguring serial ports...

>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A

>Configured serial ports

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h[m[?25hMounting shared memory FS on /dev/shm
[80C[10D[1;32mdone[m

>[m[?25hActivating swap-devices in /etc/fstab...

>Adding 2104504k swap on /dev/sda2.  Priority:-1 extents:1
>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h[m[?25hbootsplash: status on console 0 changed to on
>Starting udevd 7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hColdplug

>Coldplug: cleaning /events Cannot handle subsystem ''

> processing events7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hActivating device mapper...

>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>Creating /dev/mapper/control character device with major:10 minor:63.

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hmd: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>[m[?25hChecking file systems...

>fsck 1.38 (30-Jun-2005)

>Checking all file systems.

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hSetting up kernel module dependencies (if required)7[?25l
[80C[10D[1;32mdone[m8[?25h

>Mounting local file systems...

>proc on /proc type proc (rw)

>sysfs on /sys type sysfs (rw)

>tmpfs on /dev/shm type tmpfs (rw)

>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)

>nothing was mounted

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h[m[?25hSetting up the CMOS clockusbcore: registered new driver usbfs
>usbcore: registered new driver hub
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>uhci_hcd: Unknown symbol usb_hcd_pci_suspend
>uhci_hcd: Unknown symbol usb_hcd_resume_root_hub
>uhci_hcd: Unknown symbol usb_hcd_pci_probe
>uhci_hcd: Unknown symbol usb_check_bandwidth
>uhci_hcd: Unknown symbol usb_disabled
>uhci_hcd: Unknown symbol usb_release_bandwidth
>uhci_hcd: Unknown symbol usb_claim_bandwidth
>uhci_hcd: Unknown symbol usb_hcd_pci_resume
>uhci_hcd: Unknown symbol usb_hcd_giveback_urb
>uhci_hcd: Unknown symbol usb_hcd_poll_rh_status
>uhci_hcd: Unknown symbol usb_hcd_pci_remove
>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 225
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 225, io base 0x00001440
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 233
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 233, io base 0x00001460
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 50
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 50, io base 0x00001480
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hw_random: RNG not detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 58
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 58, io base 0x000014a0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 225
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 225, io mem 0xcfd00000
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>i8xx TCO timer: initialized (0xf860). heartbeat=30 sec (nowayout=0)
>tpm: module not supported by Novell, setting U taint flag.
>tpm_nsc: module not supported by Novell, setting U taint flag.
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 50
>7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hCreating /var/log/boot.msg

>intel8x0_measure_ac97_clock: measured 58193 usecs
>intel8x0: clocking to 48000
>tg3.c:v3.36 (August 19, 2005)
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:80:00.0[A] -> GSI 19 (level, low) -> IRQ 177
>eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:0a:9d:48:b6
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000]
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>usbcore: registered new driver hiddev
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.00 Mouse [0461:4d03] on usb-0000:00:1d.0-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h[m[?25hLoading required kernel modules

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h[m[?25hLoaded 390393878469839112 bytes

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25h[m[?25h[m[?25h[m[?25hLoaded 778254559458668556 bytes

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hRestore device permissions7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hActivating remaining swap-devices in /etc/fstab...

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h[m[?25h[m[?25h[m[?25h[m[?25hSetting current sysctl status from /etc/sysctl.conf

>net.ipv4.icmp_echo_ignore_broadcasts = 1

>net.ipv4.conf.all.rp_filter = 1

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hEnabling syn flood protection
[80C[10D[1;32mdone[m

>Disabling IP forwarding7[?25l
[80C[10D[1;32mdone[m8[?25h

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hSetting up hostname 'linux'7[?25l
[80C[10D[1;32mdone[m8[?25h

>Setting up loopback interface     lo

>    lo        IP address: 127.0.0.1/8

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting Firewall Initialization (phase 1 of 2) NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff80475060(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.

>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (4095 buckets, 32760 max) - 304 bytes per conntrack
>7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hSystem Boot Control: The system has been 
[80C[10D[1mset up[m

>System Boot Control: Running /etc/init.d/boot.local

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h
INIT: Entering runlevel: 5

>
Boot logging started on /dev/ttyS0(/dev/console) at Thu Aug 25 12:24:44 2005

>Master Resource Control: previous runlevel: N, switching to runlevel: 
[80C[10D[1m5[m

>Starting syslog services7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25h[m[?25hStarting irqbalance 7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hInitializing random number generator7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hLoading keymap qwertz/de-latin1-nodeadkeys.map.gz

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hBIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Loading compose table winkeys shiftctrl latin1.add7[?25l
[80C[10D[1;32mdone[m8[?25h

>Start Unicode mode

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hLoading console font lat9w-16.psfu  -m trivial G0:loadable

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h[m[?25hStarting D-BUS daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting resource manager7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting SubDomain Event daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hSubDomain: SubDomain (version 1.2-13.42r5011imnx_suse) initialized
>Loading SubDomain module SubDomain: Control variable 'owlsm' changed to 0
>
[80C[10D[1;32mdone[m

>Mounting subdomainfs on /subdomain 
[80C[10D[1;32mdone[m

>Disabling OWLSM extension 
[80C[10D[1;32mdone[m

>Rebuilding certificate cache Warning: No leaf certificates present

>
[80C[10D[1;32mdone[m

>Loading SubDomain profiles 
[80C[10D[1;32mdone[m

>[m[?25h[m[?25hStarting service kdm7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hSetting up network interfaces:

>    lo

>    lo        IP address: 127.0.0.1/8

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h    eth0      device: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)

>    eth0      configuration: eth-id-00:11:0a:9d:48:b6

>    eth0      (DHCP) . NET: Registered protocol family 17
>. tg3: eth0: Link is up at 100 Mbps, half duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>. . . IP/Netmask: 10.10.102.174 / 255.255.0.0 ('f174')

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25h[m[?25hStarting RPC portmap daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25h[m[?25hImporting Net File System (NFS)
[80C[10D[1munused[m

>[m[?25hStarting nfsboot (sm-notify) 7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hacpid: loading ACPI modules (ac battery button ) 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting acpid 7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25h[m[?25hChecking/updating CPU microcode7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25h[m[?25h[m[?25hStarting SSH daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting powersaved  (accessing ACPI events over acpid) 7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting mdnsd7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting cupsd7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting Name Service Cache Daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting mail service (Postfix)7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hMount SMB/ CIFS File Systems 
[80C[10D[1munused[m

>[m[?25hStarting service kdm7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting CRON daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting HAL daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hStarting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>[m[?25hMaster Resource Control: runlevel 5 has been 
[80C[10D[1mreached[m

>Skipped services in runlevel 5: [80C[16D[1;33mnfs smbfs[m

Actions: View

Attachments on bug 112929: 47516 | 47534