Attachment 47558 Details for Bug 112983

hwinfo of e162.suse.de

e162_hwinfo.txt (text/plain), 169.74 KB, created by Klaus Singvogel on 2005-08-25 14:05:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Klaus Singvogel

Created: 2005-08-25 14:05:24 UTC

Size: 169.74 KB

patch

obsolete

>============ start debug info ============
>libhd version 11.15u (x86-64)
>kernel version is 2.6
>----- /proc/cmdline -----
>  root=/dev/sda2 vga=0x31a selinux=0    resume=/dev/sda1  splash=silent
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x00138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc)
>shm: attached segment 65536 at 0x2aaaaab03000
>>> hal.1: read hal data
>  hal: connected to: :1.7
>----- hal device list -----
>  0: udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRF'
>
>  1: udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRB'
>
>  2: udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
>  linux.hotplug_type = 4 (0x4)
>  processor.can_throttle = false
>  processor.number = 0 (0x0)
>  info.capabilities = { 'processor' }
>  info.category = 'processor'
>  info.product = 'Processor'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 1 (0x1)
>  linux.acpi_path = '/proc/acpi/processor/CPU1'
>
>  3: udi = '/org/freedesktop/Hal/devices/volume_part1_size_1077479424'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_1077479424'
>  volume.partition.msdos_part_table_type = 130 (0x82)
>  info.product = 'Volume (swap)'
>  volume.size = 1077479424ull (0x40390800ull)
>  volume.num_blocks = 2104452 (0x201c84)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 1 (0x1)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = '2'
>  volume.fsusage = 'other'
>  volume.fstype = 'swap'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD'
>  block.is_volume = true
>  block.minor = 1 (0x1)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda1'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD'
>  linux.sysfs_path_device = '/sys/block/sda/sda1'
>  linux.sysfs_path = '/sys/block/sda/sda1'
>
>  4: udi = '/org/freedesktop/Hal/devices/volume_uuid_d2dbbcfd_5339_4e44_8ab2_04f5a0aae7d0'
>  volume.policy.desired_mount_point = 'scsidisk'
>  volume.policy.mount_filesystem = 'ext3'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_d2dbbcfd_5339_4e44_8ab2_04f5a0aae7d0'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (ext3)'
>  volume.size = 5371107840ull (0x140249a00ull)
>  volume.num_blocks = 10490445 (0xa0124d)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 2 (0x2)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/'
>  volume.label = ''
>  volume.uuid = 'd2dbbcfd-5339-4e44-8ab2-04f5a0aae7d0'
>  volume.fsversion = ''
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'ext3'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD'
>  block.is_volume = true
>  block.minor = 2 (0x2)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda2'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD'
>  linux.sysfs_path_device = '/sys/block/sda/sda2'
>  linux.sysfs_path = '/sys/block/sda/sda2'
>
>  5: udi = '/org/freedesktop/Hal/devices/volume_uuid_4e557ca8_6263_4b1f_96fb_73bb416727c0'
>  volume.policy.desired_mount_point = 'scsidisk'
>  volume.policy.mount_filesystem = 'ext3'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4e557ca8_6263_4b1f_96fb_73bb416727c0'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (ext3)'
>  volume.size = 75886433280ull (0x11ab2f1400ull)
>  volume.num_blocks = 148215690 (0x8d5978a)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 3 (0x3)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/space'
>  volume.label = ''
>  volume.uuid = '4e557ca8-6263-4b1f-96fb-73bb416727c0'
>  volume.fsversion = ''
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'ext3'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD'
>  block.is_volume = true
>  block.minor = 3 (0x3)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda3'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD'
>  linux.sysfs_path_device = '/sys/block/sda/sda3'
>  linux.sysfs_path = '/sys/block/sda/sda3'
>
>  6: udi = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD'
>  storage.policy.should_mount = false
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD'
>  storage.serial = 'VN6BHECBDYJ8YD'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'HDS722580VLSA80'
>  info.vendor = 'ATA'
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0_scsi_device_lun0'
>  storage.lun = 0 (0x0)
>  storage.drive_type = 'disk'
>  storage.vendor = 'ATA'
>  storage.model = 'HDS722580VLSA80'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'scsi'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0_scsi_device_lun0'
>  linux.sysfs_path_device = '/sys/block/sda'
>  linux.sysfs_path = '/sys/block/sda'
>
>  7: udi = '/org/freedesktop/Hal/devices/storage_model_LITE_ON_DVD_SOHD_167T'
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'cdrom'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrom'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_LITE_ON_DVD_SOHD_167T'
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_LITE_ON_DVD_SOHD_167T'
>  storage.cdrom.write_speed = 0 (0x0)
>  storage.cdrom.read_speed = 8467 (0x2113)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = false
>  storage.cdrom.dvdplusrw = false
>  storage.cdrom.dvdplusr = false
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = false
>  storage.cdrom.dvd = true
>  storage.cdrom.cdrw = false
>  storage.cdrom.cdr = false
>  storage.firmware_version = '9S15'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'LITE-ON DVD SOHD-167T'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5229_ide_0_1'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'LITE-ON DVD SOHD-167T'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 64 (0x40)
>  block.major = 3 (0x3)
>  block.device = '/dev/hdb'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5229_ide_0_1'
>  linux.sysfs_path_device = '/sys/block/hdb'
>  linux.sysfs_path = '/sys/block/hdb'
>
>  8: udi = '/org/freedesktop/Hal/devices/computer_storage'
>  storage.mount_point = '/media/floppy'
>  storage.is_mounted = true
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'floppy'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  storage.policy.desired_mount_point = 'floppy'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/computer_storage'
>  info.udi = '/org/freedesktop/Hal/devices/computer_storage'
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  storage.removable = true
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  storage.physical_device = '/org/freedesktop/Hal/devices/computer'
>  storage.drive_type = 'floppy'
>  info.product = 'PC Floppy Drive'
>  info.vendor = ''
>  storage.vendor = 'PC Floppy Drive'
>  storage.model = ''
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = true
>  storage.bus = 'platform'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 2 (0x2)
>  block.device = '/dev/fd0'
>  linux.hotplug_type = 3 (0x3)
>  linux.sysfs_path_device = '/sys/block/fd0'
>  linux.sysfs_path = '/sys/block/fd0'
>
>  9: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/timer'
>  linux.device_file = '/dev/snd/timer'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  alsa.device_file = '/dev/snd/timer'
>  info.product = 'ALSA Timer Device'
>  alsa.type = 'timer'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.sysfs_path = '/sys/class/sound/timer'
>
>  10: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux Port'
>  serio.description = 'i8042 Aux Port'
>  serio.id = 'serio0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
>
>  11: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input'
>  input.product = 'AT Translated Set 2 keyboard'
>  info.product = 'AT Translated Set 2 keyboard'
>  linux.device_file = '/dev/input/event1'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event1'
>  info.capabilities = { 'input', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.sysfs_path = '/sys/class/input/event1'
>
>  12: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Kbd Port'
>  serio.description = 'i8042 Kbd Port'
>  serio.id = 'serio1'
>  info.linux.driver = 'atkbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
>
>  13: udi = '/org/freedesktop/Hal/devices/pci_10b9_1689'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_1689'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'M1689 K8 Northbridge [Super K8 Single Chip]'
>  pci.product = 'M1689 K8 Northbridge [Super K8 Single Chip]'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 5769 (0x1689)
>  info.linux.driver = 'agpgart-amd64'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>
>  14: udi = '/org/freedesktop/Hal/devices/pci_10de_2d'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_2d'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'MSI-8808'
>  pci.subsys_vendor = 'Micro-Star International Co., Ltd.'
>  info.product = 'NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]'
>  pci.product = 'NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 5218 (0x1462)
>  pci.subsys_product_id = 34824 (0x8808)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 45 (0x2d)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5246'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>
>  15: udi = '/org/freedesktop/Hal/devices/pci_10b9_5246'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5246'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'AGP8X Controller'
>  pci.product = 'AGP8X Controller'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 21062 (0x5246)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>
>  16: udi = '/org/freedesktop/Hal/devices/net_00_50_ba_c3_b5_1b'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_50_ba_c3_b5_1b'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 346730771739ull (0x50bac3b51bull)
>  info.product = 'Networking Interface'
>  net.interface_up = true
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 3 (0x3)
>  net.address = '00:50:ba:c3:b5:1b'
>  net.interface = 'eth0'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3043'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3043'
>  linux.sysfs_path = '/sys/class/net/eth0'
>
>  17: udi = '/org/freedesktop/Hal/devices/pci_1106_3043'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3043'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'DFE-530TX rev A'
>  pci.subsys_vendor = 'D-Link System Inc'
>  info.product = 'VT86C100A [Rhine]'
>  pci.product = 'VT86C100A [Rhine]'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4486 (0x1186)
>  pci.subsys_product_id = 5120 (0x1400)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12355 (0x3043)
>  info.linux.driver = 'via-rhine'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5249'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0'
>
>  18: udi = '/org/freedesktop/Hal/devices/pci_10b9_5249'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5249'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'M5249 HTT to PCI Bridge'
>  pci.product = 'M5249 HTT to PCI Bridge'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 1 (0x1)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 21065 (0x5249)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
>
>  19: udi = '/org/freedesktop/Hal/devices/pci_10b9_1563'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_1563'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x1563)'
>  pci.subsys_vendor = 'ASRock Incorporation'
>  info.product = 'M1563 HyperTransport South Bridge'
>  pci.product = 'M1563 HyperTransport South Bridge'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 6217 (0x1849)
>  pci.subsys_product_id = 5475 (0x1563)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 5475 (0x1563)
>  info.linux.driver = 'ali1563_i2c'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'
>
>  20: udi = '/org/freedesktop/Hal/devices/pci_10b9_7101'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_7101'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x7101)'
>  pci.subsys_vendor = 'ASRock Incorporation'
>  info.product = 'M7101 Power Management Controller [PMU]'
>  pci.product = 'M7101 Power Management Controller [PMU]'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 128 (0x80)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 6217 (0x1849)
>  pci.subsys_product_id = 28929 (0x7101)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 28929 (0x7101)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1'
>
>  21: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_playback_0_2'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_playback_0_2'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D2p'
>  linux.device_file = '/dev/snd/pcmC0D2p'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ALi M5455 - IEC958 ALSA Playback Device'
>  alsa.type = 'playback'
>  alsa.device_id = 'ALi M5455 - IEC958'
>  alsa.card_id = 'M5455'
>  alsa.device = 2 (0x2)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  alsa.device_file = '/dev/snd/pcmC0D2p'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D2p'
>
>  22: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_2'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_2'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D2c'
>  linux.device_file = '/dev/snd/pcmC0D2c'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ALi M5455 - IEC958 ALSA Capture Device'
>  alsa.type = 'capture'
>  alsa.device_id = 'ALi M5455 - IEC958'
>  alsa.card_id = 'M5455'
>  alsa.device = 2 (0x2)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  alsa.device_file = '/dev/snd/pcmC0D2c'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D2c'
>
>  23: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D1c'
>  linux.device_file = '/dev/snd/pcmC0D1c'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ALi M5455 - MIC ADC ALSA Capture Device'
>  alsa.type = 'capture'
>  alsa.device_id = 'ALi M5455 - MIC ADC'
>  alsa.card_id = 'M5455'
>  alsa.device = 1 (0x1)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  alsa.device_file = '/dev/snd/pcmC0D1c'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D1c'
>
>  24: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_playback_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_playback_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D0p'
>  linux.device_file = '/dev/snd/pcmC0D0p'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ALi M5455 ALSA Playback Device'
>  alsa.type = 'playback'
>  alsa.device_id = 'ALi M5455'
>  alsa.card_id = 'M5455'
>  alsa.device = 0 (0x0)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  alsa.device_file = '/dev/snd/pcmC0D0p'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D0p'
>
>  25: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D0c'
>  linux.device_file = '/dev/snd/pcmC0D0c'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ALi M5455 ALSA Capture Device'
>  alsa.type = 'capture'
>  alsa.device_id = 'ALi M5455'
>  alsa.card_id = 'M5455'
>  alsa.device = 0 (0x0)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  alsa.device_file = '/dev/snd/pcmC0D0c'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D0c'
>
>  26: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_control_0__1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_control_0__1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/controlC0'
>  linux.device_file = '/dev/snd/controlC0'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'M5455 ALSA Control Device'
>  alsa.card_id = 'M5455'
>  alsa.type = 'control'
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  alsa.device_file = '/dev/snd/controlC0'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/controlC0'
>
>  27: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_mixer_0__1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_mixer_0__1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/mixer'
>  linux.device_file = '/dev/mixer'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ALi M5455 OSS Control Device'
>  oss.type = 'mixer'
>  oss.device_id = 'ALi M5455'
>  oss.card_id = 'M5455'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  oss.device_file = '/dev/mixer'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/mixer'
>
>  28: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/dsp'
>  linux.device_file = '/dev/dsp'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ALi M5455 OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 0 (0x0)
>  oss.device_id = 'ALi M5455'
>  oss.card_id = 'M5455'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  oss.device_file = '/dev/dsp'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/dsp'
>
>  29: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/audio'
>  linux.device_file = '/dev/audio'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ALi M5455 OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 0 (0x0)
>  oss.device_id = 'ALi M5455'
>  oss.card_id = 'M5455'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  oss.device_file = '/dev/audio'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/audio'
>
>  30: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/adsp'
>  linux.device_file = '/dev/adsp'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'ALi M5455 OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 1 (0x1)
>  oss.device_id = 'ALi M5455'
>  oss.card_id = 'M5455'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  oss.device_file = '/dev/adsp'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/adsp'
>
>  31: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0850)'
>  pci.subsys_vendor = 'ASRock Incorporation'
>  info.product = 'M5455 PCI AC-Link Controller Audio Device'
>  pci.product = 'M5455 PCI AC-Link Controller Audio Device'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 6217 (0x1849)
>  pci.subsys_product_id = 2128 (0x850)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 21589 (0x5455)
>  info.linux.driver = 'Intel ICH'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:04.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0'
>
>  32: udi = '/org/freedesktop/Hal/devices/net_00_0b_6a_7b_ad_7b'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_0b_6a_7b_ad_7b'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 49031130491ull (0xb6a7bad7bull)
>  info.product = 'Networking Interface'
>  net.interface_up = false
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 2 (0x2)
>  net.address = '00:0b:6a:7b:ad:7b'
>  net.interface = 'eth2'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5263'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5263'
>  linux.sysfs_path = '/sys/class/net/eth2'
>
>  33: udi = '/org/freedesktop/Hal/devices/pci_10b9_5263'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5263'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x5263)'
>  pci.subsys_vendor = 'ASRock Incorporation'
>  info.product = 'M5263 Ethernet Controller'
>  pci.product = 'M5263 Ethernet Controller'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 6217 (0x1849)
>  pci.subsys_product_id = 21091 (0x5263)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 21091 (0x5263)
>  info.linux.driver = 'tulip'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0d.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0'
>
>  34: udi = '/org/freedesktop/Hal/devices/pci_10b9_5229_ide_0_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5229_ide_0_1'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (slave)'
>  ide.channel = 1 (0x1)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5229'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0/ide0/0.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/ide0/0.1'
>
>  35: udi = '/org/freedesktop/Hal/devices/pci_10b9_5229'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5229'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x5229)'
>  pci.subsys_vendor = 'ALi Corporation'
>  info.product = 'M5229 IDE'
>  pci.product = 'M5229 IDE'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 250 (0xfa)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4281 (0x10b9)
>  pci.subsys_product_id = 21033 (0x5229)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 21033 (0x5229)
>  info.linux.driver = 'ALI15x3_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0'
>
>  36: udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0_scsi_device_lun0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0_scsi_device_lun0'
>  linux.subsystem = 'scsi'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'SCSI Device'
>  info.linux.driver = 'sd'
>  scsi.lun = 0 (0x0)
>  scsi.target = 0 (0x0)
>  scsi.bus = 0 (0x0)
>  scsi.host = 0 (0x0)
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0'
>  info.bus = 'scsi'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0'
>
>  37: udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 0 (0x0)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5289'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.1/host0'
>  linux.sysfs_path = '/sys/class/scsi_host/host0'
>
>  38: udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 1 (0x1)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5289'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.1/host1'
>  linux.sysfs_path = '/sys/class/scsi_host/host1'
>
>  39: udi = '/org/freedesktop/Hal/devices/pci_10b9_5289'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5289'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x5289)'
>  pci.subsys_vendor = 'ASRock Incorporation'
>  info.product = 'Unknown (0x5289)'
>  pci.product = 'Unknown (0x5289)'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 143 (0x8f)
>  pci.device_subclass = 128 (0x80)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 6217 (0x1849)
>  pci.subsys_product_id = 21129 (0x5289)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 21129 (0x5289)
>  info.linux.driver = 'sata_uli'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.1'
>
>  40: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-rc6-git13-4-default ohci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 3 (0x3)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:0f.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0'
>
>  41: udi = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-1/1-1:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1105 (0x451)
>  usb.product_id = 5190 (0x1446)
>  usb.vendor = 'Texas Instruments, Inc.'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 272 (0x110)
>  usb.max_power = 100 (0x64)
>  usb.num_ports = 4 (0x4)
>  usb.linux.device_number = 4 (0x4)
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-1/1-1:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-1/1-1:1.0'
>
>  42: udi = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.linux.device_number = 4 (0x4)
>  usb_device.num_ports = 4 (0x4)
>  usb_device.max_power = 100 (0x64)
>  usb_device.device_revision_bcd = 272 (0x110)
>  info.product = 'TUSB2040/2070 Hub'
>  usb_device.product = 'TUSB2040/2070 Hub'
>  info.vendor = 'Texas Instruments, Inc.'
>  usb_device.vendor = 'Texas Instruments, Inc.'
>  usb_device.product_id = 5190 (0x1446)
>  usb_device.vendor_id = 1105 (0x451)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-1'
>
>  43: udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0_printer_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0_printer_noserial'
>  printer.description = 'EPSON Stylus COLOR 580'
>  printer.product = 'Stylus COLOR 580'
>  printer.vendor = 'EPSON'
>  info.vendor = 'EPSON'
>  linux.device_file = '/dev/usb/lp0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 2 (0x2)
>  printer.physical_device = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0'
>  printer.device = '/dev/usb/lp0'
>  info.product = 'Stylus COLOR 580'
>  info.capabilities = { 'printer' }
>  info.category = 'printer'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-2/1-2:1.0'
>  linux.sysfs_path = '/sys/class/usb/lp0'
>
>  44: udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Printer Interface'
>  usb.interface.protocol = 2 (0x2)
>  usb.interface.subclass = 1 (0x1)
>  usb.interface.class = 7 (0x7)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'usblp'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-2/1-2:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1208 (0x4b8)
>  usb.product_id = 5 (0x5)
>  usb.vendor = 'Seiko Epson Corp.'
>  usb.product = 'USB Printer Interface'
>  usb.device_revision_bcd = 256 (0x100)
>  usb.max_power = 2 (0x2)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 5 (0x5)
>  usb.serial = 'L84NO0009270827130'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-2/1-2:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-2/1-2:1.0'
>
>  45: udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = 'L84NO0009270827130'
>  usb_device.linux.device_number = 5 (0x5)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 2 (0x2)
>  usb_device.device_revision_bcd = 256 (0x100)
>  info.product = 'Stylus Printer'
>  usb_device.product = 'Stylus Printer'
>  info.vendor = 'Seiko Epson Corp.'
>  usb_device.vendor = 'Seiko Epson Corp.'
>  usb_device.product_id = 5 (0x5)
>  usb_device.vendor_id = 1208 (0x4b8)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-2'
>
>  46: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:0f.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 3 (0x3)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'OHCI Host Controller'
>  usb_device.product = 'OHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-rc6-git13-4-default ohci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-rc6-git13-4-default ohci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5237_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0/usb1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1'
>
>  47: udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_1'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x5237)'
>  pci.subsys_vendor = 'ASRock Incorporation'
>  info.product = 'USB 1.1 Controller'
>  pci.product = 'USB 1.1 Controller'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 6217 (0x1849)
>  pci.subsys_product_id = 21047 (0x5237)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 21047 (0x5237)
>  info.linux.driver = 'ohci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0'
>
>  48: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-rc6-git13-4-default ohci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 3 (0x3)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:0f.1'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0'
>
>  49: udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0_logicaldev_input'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.hack.add_usb_parent = true
>  resmgr.class = 'input'
>  resmgr.device = '/dev/input/event2'
>  input.product = '1241:1111'
>  info.product = '1241:1111'
>  linux.device_file = '/dev/input/event2'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event2'
>  info.capabilities = { 'input', 'input.mouse' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0'
>  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0'
>  linux.sysfs_path = '/sys/class/input/event2'
>
>  50: udi = '/org/freedesktop/Hal/devices/computer'
>  storage.policy.default.mount_option.exec = true
>  storage.policy.default.mount_option.pamconsole = true
>  storage.policy.default.mount_option.noauto = true
>  storage.policy.default.managed_keyword.secondary = 'kudzu'
>  storage.policy.default.managed_keyword.primary = 'managed'
>  storage.policy.default.use_managed_keyword = true
>  storage.policy.default.mount_root = '/media'
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-set-power-save' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', 'b' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'SetPowerSave' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
>  info.addons = { 'hald-addon-acpi' }
>  system.product = 'K8 Combo-Z 1.00'
>  system.vendor = 'TBD'
>  smbios.system.uuid = '00020003-0004-0005-0006-000700080009'
>  smbios.system.serial = '00000000'
>  smbios.system.version = '1.00'
>  smbios.system.product = 'K8 Combo-Z'
>  smbios.system.manufacturer = 'TBD'
>  smbios.bios.release_date = '07/11/2005'
>  smbios.bios.version = 'L2.23'
>  smbios.bios.vendor = 'American Megatrends Inc.'
>  power_management.acpi.linux.version = '20050408'
>  power_management.type = 'acpi'
>  power_management.is_enabled = true
>  system.formfactor = 'unknown'
>  system.kernel.machine = 'x86_64'
>  system.kernel.version = '2.6.13-rc6-git13-4-default'
>  system.kernel.name = 'Linux'
>  info.udi = '/org/freedesktop/Hal/devices/computer'
>  info.product = 'Computer'
>  linux.sysfs_path_device = '(none)'
>  info.bus = 'unknown'
>
>  51: udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB HID Interface'
>  usb.interface.protocol = 2 (0x2)
>  usb.interface.subclass = 1 (0x1)
>  usb.interface.class = 3 (0x3)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'usbhid'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 4673 (0x1241)
>  usb.product_id = 4369 (0x1111)
>  usb.vendor = 'Belkin'
>  usb.product = 'USB HID Interface'
>  usb.device_revision_bcd = 256 (0x100)
>  usb.max_power = 100 (0x64)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 3 (0x3)
>  usb.speed_bcd = 336 (0x150)
>  usb.version_bcd = 256 (0x100)
>  usb.is_self_powered = false
>  usb.can_wake_up = true
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0'
>
>  52: udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = false
>  usb_device.version_bcd = 256 (0x100)
>  usb_device.speed_bcd = 336 (0x150)
>  usb_device.linux.device_number = 3 (0x3)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 100 (0x64)
>  usb_device.device_revision_bcd = 256 (0x100)
>  info.product = 'Mouse'
>  usb_device.product = 'Mouse'
>  info.vendor = 'Belkin'
>  usb_device.vendor = 'Belkin'
>  usb_device.product_id = 4369 (0x1111)
>  usb_device.vendor_id = 4673 (0x1241)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1'
>
>  53: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:0f.1'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 3 (0x3)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'OHCI Host Controller'
>  usb_device.product = 'OHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-rc6-git13-4-default ohci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-rc6-git13-4-default ohci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5237_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2'
>
>  54: udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_0'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x5237)'
>  pci.subsys_vendor = 'ASRock Incorporation'
>  info.product = 'USB 1.1 Controller'
>  pci.product = 'USB 1.1 Controller'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 6217 (0x1849)
>  pci.subsys_product_id = 21047 (0x5237)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 21047 (0x5237)
>  info.linux.driver = 'ohci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1'
>
>  55: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-rc6-git13-4-default ohci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 3 (0x3)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:0f.2'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 3 (0x3)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0'
>
>  56: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 3 (0x3)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:0f.2'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 3 (0x3)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'OHCI Host Controller'
>  usb_device.product = 'OHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-rc6-git13-4-default ohci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-rc6-git13-4-default ohci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2/usb3'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5237'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.2/usb3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2/usb3'
>
>  57: udi = '/org/freedesktop/Hal/devices/pci_10b9_5237'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5237'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x5237)'
>  pci.subsys_vendor = 'ASRock Incorporation'
>  info.product = 'USB 1.1 Controller'
>  pci.product = 'USB 1.1 Controller'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 6217 (0x1849)
>  pci.subsys_product_id = 21047 (0x5237)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 21047 (0x5237)
>  info.linux.driver = 'ohci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2'
>
>  58: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 1 (0x1)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-rc6-git13-4-default ehci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 8 (0x8)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:0f.3'
>  usb.speed_bcd = 294912 (0x48000)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 4 (0x4)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0'
>
>  59: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 4 (0x4)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 294912 (0x48000)
>  usb_device.serial = '0000:00:0f.3'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 8 (0x8)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'EHCI Host Controller'
>  usb_device.product = 'EHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-rc6-git13-4-default ehci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-rc6-git13-4-default ehci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 1 (0x1)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3/usb4'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5239'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.3/usb4'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3/usb4'
>
>  60: udi = '/org/freedesktop/Hal/devices/pci_10b9_5239'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5239'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x5239)'
>  pci.subsys_vendor = 'ASRock Incorporation'
>  info.product = 'USB 2.0 Controller'
>  pci.product = 'USB 2.0 Controller'
>  info.vendor = 'ALi Corporation'
>  pci.vendor = 'ALi Corporation'
>  pci.device_protocol = 32 (0x20)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 6217 (0x1849)
>  pci.subsys_product_id = 21049 (0x5239)
>  pci.vendor_id = 4281 (0x10b9)
>  pci.product_id = 21049 (0x5239)
>  info.linux.driver = 'ehci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3'
>
>  61: udi = '/org/freedesktop/Hal/devices/pci_1022_1100'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
>  pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
>  info.vendor = 'Advanced Micro Devices [AMD]'
>  pci.vendor = 'Advanced Micro Devices [AMD]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4130 (0x1022)
>  pci.product_id = 4352 (0x1100)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0'
>
>  62: udi = '/org/freedesktop/Hal/devices/pci_1022_1101'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'K8 [Athlon64/Opteron] Address Map'
>  pci.product = 'K8 [Athlon64/Opteron] Address Map'
>  info.vendor = 'Advanced Micro Devices [AMD]'
>  pci.vendor = 'Advanced Micro Devices [AMD]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4130 (0x1022)
>  pci.product_id = 4353 (0x1101)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1'
>
>  63: udi = '/org/freedesktop/Hal/devices/pci_1022_1102'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'K8 [Athlon64/Opteron] DRAM Controller'
>  pci.product = 'K8 [Athlon64/Opteron] DRAM Controller'
>  info.vendor = 'Advanced Micro Devices [AMD]'
>  pci.vendor = 'Advanced Micro Devices [AMD]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4130 (0x1022)
>  pci.product_id = 4354 (0x1102)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2'
>
>  64: udi = '/org/freedesktop/Hal/devices/pci_1022_1103'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control'
>  pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control'
>  info.vendor = 'Advanced Micro Devices [AMD]'
>  pci.vendor = 'Advanced Micro Devices [AMD]'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4130 (0x1022)
>  pci.product_id = 4355 (0x1103)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3'
>----- hal device list end -----
>>> floppy.1: get nvram
>----- /proc/nvram -----
>  Checksum status: valid
>  # floppies     : 1
>  Floppy 0 type  : 3.5'' 1.44M
>  Floppy 1 type  : none
>  HD 0 type      : none
>  HD 1 type      : none
>  HD type 48 data: 0/0/0 C/H/S, precomp 0, lz 0
>  HD type 49 data: 511/0/0 C/H/S, precomp 0, lz 0
>  DOS base memory: 640 kB
>  Extended memory: 65535 kB (configured), 65535 kB (tested)
>  Gfx adapter    : EGA, VGA, ... (with BIOS)
>  FPU            : installed
>----- /proc/nvram end -----
>>> floppy.2: nvram info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>  bios: 0 disks
>>> bios.2: rom
>>> bios.3: smp
>----- BIOS data 0x00400 - 0x004ff -----
>  400  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  410  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  420  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  440  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  470  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  480  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  490  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>>> bios.4: vbe
>  klog: pci config type 1
>VBE: Could not init Int10
>>> bios.5: 32
>>> sys.1: cpu
>>> misc.9: kernel log
>----- kernel log -----
>  <4>Bootdata ok (command line is root=/dev/sda2 vga=0x31a selinux=0    resume=/dev/sda1  splash=silent)
>  <5>Linux version 2.6.13-rc6-git13-4-default (geeko@buildhost) (gcc version 4.0.2 20050818 (prerelease) (SUSE Linux)) #1 Mon Aug 22 18:38:22 UTC 2005
>  <6>BIOS-provided physical RAM map:
>  <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  <4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
>  <4> BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
>  <4> BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
>  <4> BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
>  <4> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
>  <4> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>  <7>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000f98b0
>  <7>ACPI: RSDT (v001 A M I  OEMRSDT  0x07000511 MSFT 0x00000097) @ 0x000000001ffb0000
>  <7>ACPI: FADT (v001 A M I  OEMFACP  0x07000511 MSFT 0x00000097) @ 0x000000001ffb0200
>  <7>ACPI: MADT (v001 A M I  OEMAPIC  0x07000511 MSFT 0x00000097) @ 0x000000001ffb0390
>  <7>ACPI: OEMB (v001 A M I  AMI_OEM  0x07000511 MSFT 0x00000097) @ 0x000000001ffc0040
>  <7>ACPI: DSDT (v001  K8CBZ K8CBZ223 0x00000223 INTL 0x02002026) @ 0x0000000000000000
>  <7>On node 0 totalpages: 130992
>  <7>  DMA zone: 4096 pages, LIFO batch:1
>  <7>  Normal zone: 126896 pages, LIFO batch:31
>  <7>  HighMem zone: 0 pages, LIFO batch:1
>  <6>ACPI: PM-Timer IO Port: 0x808
>  <7>ACPI: Local APIC address 0xfee00000
>  <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>  <6>Processor #0 15:15 APIC version 16
>  <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>  <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>  <6>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>  <7>ACPI: IRQ0 used by override.
>  <7>ACPI: IRQ2 used by override.
>  <7>ACPI: IRQ9 used by override.
>  <6>Setting APIC routing to flat
>  <6>Using ACPI (MADT) for SMP configuration information
>  <6>Allocating PCI resources starting at 20000000 (gap: 20000000:df7c0000)
>  <4>Checking aperture...
>  <4>CPU 0: aperture @ f8000000 size 64 MB
>  <4>Built 1 zonelists
>  <5>Kernel command line: root=/dev/sda2 vga=0x31a selinux=0    resume=/dev/sda1  splash=silent
>  <6>bootsplash: silent mode.
>  <4>Initializing CPU#0
>  <4>PID hash table entries: 2048 (order: 11, 65536 bytes)
>  <6>time.c: Using 3.579545 MHz PM timer.
>  <6>time.c: Detected 2199.983 MHz processor.
>  <6>time.c: Using PIT/TSC based timekeeping.
>  <4>Console: colour dummy device 80x25
>  <4>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>  <4>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>  <4>Memory: 507680k/523968k available (2364k kernel code, 15504k reserved, 1231k data, 176k init)
>  <4>Calibrating delay using timer specific routine.. 4403.45 BogoMIPS (lpj=8806907)
>  <6>Security Framework v1.0.0 initialized
>  <6>SELinux:  Disabled at boot.
>  <4>Mount-cache hash table entries: 256
>  <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>  <6>CPU: L2 Cache: 512K (64 bytes/line)
>  <6>mtrr: v2.0 (20020519)
>  <4>CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 00
>  <6>checking if image is initramfs... it is
>  <6>ACPI: Looking for DSDT in initrd... not found!
>  <4> not found!
>  <4> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
>  <4>Parsing all Control Methods:........................................................................................................................................................
>  <4>Table [DSDT](id F004) - 479 Objects with 47 Devices 152 Methods 10 Regions
>  <4>ACPI Namespace successfully loaded at root ffffffff804f5580
>  <4>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
>  <6>Using local APIC timer interrupts.
>  <6>Detected 12.499 MHz APIC timer.
>  <6>testing NMI watchdog ... OK.
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: Using configuration type 1
>  <6>ACPI: Subsystem revision 20050408
>  <4>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
>  <4>evgpeblk-1024 [06] ev_create_gpe_block   : Found 7 Wake, Enabled 0 Runtime GPEs in this block
>  <4>Completing Region/Field/Buffer/Package initialization:...............................................................................................
>  <4>Initialized 9/10 Regions 25/25 Fields 43/43 Buffers 18/19 Packages (488 nodes)
>  <4>Executing all Device _STA and_INI methods:...................................................
>  <4>51 Devices found containing: 51 _STA, 1 _INI methods
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using IOAPIC for interrupt routing
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <4>PCI: Probing PCI hardware (bus 00)
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>  <7>Boot video device is 0000:01:00.0
>  <6>PCI: Transparent bridge - 0000:00:02.0
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
>  <4>ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <6>PCI: Bridge: 0000:00:01.0
>  <6>  IO window: disabled.
>  <6>  MEM window: fc900000-fe9fffff
>  <6>  PREFETCH window: f0800000-f47fffff
>  <6>PCI: Bridge: 0000:00:02.0
>  <6>  IO window: c000-cfff
>  <6>  MEM window: fea00000-feafffff
>  <6>  PREFETCH window: 20000000-200fffff
>  <7>PCI: Setting latency timer of device 0000:00:01.0 to 64
>  <7>PCI: Setting latency timer of device 0000:00:02.0 to 64
>  <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>  <6>agpgart: Detected AGP bridge 0
>  <6>Setting up ULi AGP. 
>  <6>agpgart: AGP aperture is 64M @ 0xf8000000
>  <6>PCI-DMA: Disabling IOMMU.
>  <4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>  <6>audit: initializing netlink socket (disabled)
>  <4>audit(1124976756.520:1): initialized
>  <4>Total HugeTLB memory allocated, 0
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>vesafb: framebuffer at 0xf2000000, mapped to 0xffffc20000080000, using 10240k, total 32768k
>  <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=0
>  <6>vesafb: scrolling: redraw
>  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>  <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104443 bytes,<6>...found (1280x1024, 17839 bytes, v3).
>  <4>Console: switching to colour frame buffer device 158x59
>  <6>fb0: VESA VGA frame buffer device
>  <6>Real Time Clock Driver v1.12
>  <6>Non-volatile memory driver v1.2
>  <6>Linux agpgart interface v0.101 (c) Dave Jones
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered
>  <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>  <6>loop: loaded (max 8 devices)
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: PC Speaker
>  <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 3.38
>  <6>NET: Registered protocol family 2
>  <4>IP route cache hash table entries: 8192 (order: 4, 65536 bytes)
>  <4>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>  <4>TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
>  <6>TCP: Hash tables configured (established 32768 bind 32768)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <4>ACPI wakeup devices: 
>  <4> HTT PS2K UAR1 AC97 MC97  LAN USB0 USB1 USB2 UB20 
>  <6>ACPI: (supports S0 S1 S3 S4 S5)
>  <4>Freeing unused kernel memory: 176k freed
>  <3>udev[851]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <5>SCSI subsystem initialized
>  <3>udev[855]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[858]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <6>input: AT Translated Set 2 keyboard on isa0060/serio0
>  <3>udev[861]: main: action, subsystem or devpath missing
>  <3>udev[865]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[867]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[871]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <3>udev[875]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[878]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <6>ALI15X3: IDE controller at PCI slot 0000:00:0e.0
>  <6>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 169
>  <6>ALI15X3: chipset revision 199
>  <6>ALI15X3: not 100% native mode: will probe irqs later
>  <6>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:DMA
>  <6>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
>  <7>Probing IDE interface ide0...
>  <4>hdb: LITE-ON DVD SOHD-167T, ATAPI CD/DVD-ROM drive
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <7>Probing IDE interface ide1...
>  <3>udev[881]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[885]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <7>libata version 1.11 loaded.
>  <3>udev[890]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[893]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <6>ACPI: PCI Interrupt 0000:00:0e.1[A] -> GSI 19 (level, low) -> IRQ 169
>  <7>Losing some ticks... checking if CPU frequency changed.
>  <6>ata1: SATA max UDMA/133 cmd 0xF80 ctl 0xF02 bmdma 0xD880 irq 169
>  <6>ata2: SATA max UDMA/133 cmd 0xE80 ctl 0xE02 bmdma 0xD888 irq 169
>  <7>ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e8 86:3c02 87:4023 88:003f
>  <6>ata1: dev 0 ATA, max UDMA/100, 160836480 sectors: lba48
>  <6>ata1: dev 0 configured for UDMA/100
>  <6>scsi0 : sata_uli
>  <3>udev[898]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <6>ata2: no device found (phy stat 00000000)
>  <6>scsi1 : sata_uli
>  <5>  Vendor: ATA       Model: HDS722580VLSA80   Rev: V32O
>  <5>  Type:   Direct-Access                      ANSI SCSI revision: 05
>  <3>udev[901]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <5>SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
>  <5>SCSI device sda: drive cache: write back
>  <5>SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
>  <5>SCSI device sda: drive cache: write back
>  <6> sda: sda1 sda2 sda3
>  <5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  <3>udev[918]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[923]: run_program: exec of program '/sbin/modprobe' failed
>  <3>udev[924]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[925]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[904]: import_file_into_env: can't open '/sbin/path_id /block/sda'
>  <6>ACPI: CPU0 (power states: C1[C1])
>  <4>acpi_processor-0521 [06] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x2
>  <3>udev[927]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[928]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[932]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[933]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[934]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[938]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[942]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[945]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[949]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[953]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[956]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <6>hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <3>udev[959]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <4>Attempting manual resume
>  <3>swsusp: Suspend partition has wrong signature?
>  <3>udev[968]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <3>udev[972]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on sda2, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <6>bootsplash: status on console 0 changed to on
>  <6>md: Autodetecting RAID arrays.
>  <6>md: autorun ...
>  <6>md: ... autorun DONE.
>  <6>Adding 1052216k swap on /dev/sda1.  Priority:-1 extents:1
>  <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on sda3, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/ac97/ac97_codec.c:1958: AC'97 1 does not respond - RESET
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout.
>  <3>ALSA sound/pci/ac97/ac97_codec.c:1967: AC'97 1 access is not valid [0xffffffff], removing mixer.
>  <3>ALSA sound/pci/intel8x0.c:2069: Unable to initialize codec #1
>  <6>intel8x0_measure_ac97_clock: measured 55038 usecs
>  <6>intel8x0: clocking to 48000
>  <4>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>  <6>ACPI: PCI Interrupt 0000:00:0f.3[D] -> GSI 23 (level, low) -> IRQ 217
>  <6>ehci_hcd 0000:00:0f.3: EHCI Host Controller
>  <6>ehci_hcd 0000:00:0f.3: debug port 1
>  <6>ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 4
>  <6>ehci_hcd 0000:00:0f.3: irq 217, io mem 0xfebfe800
>  <6>ehci_hcd 0000:00:0f.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>  <6>hub 4-0:1.0: USB hub found
>  <6>hub 4-0:1.0: 8 ports detected
>  <6>usb 2-1: new low speed USB device using ohci_hcd and address 2
>  <6>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 209
>  <6>PCI: Via IRQ fixup for 0000:02:06.0, from 11 to 1
>  <6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 225
>  <4>PCI: Unable to reserve mem region #2:2000000@f2000000 for device 0000:01:00.0
>  <3>rivafb: cannot request PCI regions
>  <6>ACPI: PCI interrupt for device 0000:01:00.0 disabled
>  <4>rivafb: probe of 0000:01:00.0 failed with error -16
>  <6>eth1: VIA Rhine at 0x1cc00, 00:50:ba:c3:b5:1b, IRQ 209.
>  <6>eth1: MII PHY found at address 8, status 0x782d advertising 05e1 Link 40a1.
>  <4>nvidiafb: module not supported by Novell, setting U taint flag.
>  <6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 225
>  <4>PCI: Unable to reserve mem region #2:2000000@f2000000 for device 0000:01:00.0
>  <3>nvidiafb: cannot request PCI regions
>  <6>ACPI: PCI interrupt for device 0000:01:00.0 disabled
>  <6>usb 1-2: USB disconnect, address 3
>  <3>hub 1-1:1.0: hub_port_status failed (err = -110)
>  <3>hub 1-1:1.0: hub_port_status failed (err = -110)
>  <3>hub 1-1:1.0: hub_port_status failed (err = -110)
>  <3>hub 1-1:1.0: hub_port_status failed (err = -110)
>  <6>Floppy drive(s): fd0 is 1.44M
>  <6>FDC 0 is a post-1991 82077
>  <6>usb 1-1: USB disconnect, address 2
>  <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>  <6>usb 1-1: new full speed USB device using ohci_hcd and address 4
>  <6>hub 1-1:1.0: USB hub found
>  <6>hub 1-1:1.0: 4 ports detected
>  <6>usb 1-2: new full speed USB device using ohci_hcd and address 5
>  <6>usb 2-1: new low speed USB device using ohci_hcd and address 3
>  <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
>  <6>usbcore: registered new driver usblp
>  <6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>  <6>usbcore: registered new driver hiddev
>  <3>input.c: calling hotplug without a hotplug agent defined
>  <6>input: USB HID v1.00 Mouse [1241:1111] on usb-0000:00:0f.1-1
>  <6>usbcore: registered new driver usbhid
>  <6>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>  <6>SubDomain: SubDomain (version 1.2-13.42r5011imnx_suse) initialized
>  <4>SubDomain: Control variable 'owlsm' changed to 0
>  <6>eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
>  <6>NET: Registered protocol family 17
>  <6>bootsplash: status on console 0 changed to on
>  <6>ACPI: Power Button (FF) [PWRF]
>  <6>ACPI: Power Button (CM) [PWRB]
>  <6>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>  <3>microcode: CPU0 not a capable Intel processor
>  <6>microcode: No new microcode data for CPU0
>  <6>IA-32 Microcode Update Driver v1.14 unregistered
>  <6>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3)
>  <6>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV)
>  <6>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
>  <6>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
>  <6>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0xa (1300 mV)
>  <4>cpu_init done, current fid 0xe, vid 0x2
>  <6>NET: Registered protocol family 10
>  <6>Disabled Privacy Extensions on device ffffffff80446b40(lo)
>  <6>IPv6 over IPv4 tunneling driver
>  <6>bootsplash: status on console 0 changed to on
>  <6>subfs 0.9
>  <6>hald-subfs-moun[5622]: segfault at 0000000000000000 rip 00002aaaaaf47570 rsp 00007fffffc08b38 error 4
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/modprobe parport " -----
>  FATAL: Error inserting parport (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/parport/parport.ko): Operation not permitted
>  FATAL: Error running install command for parport
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc " -----
>  FATAL: Error inserting parport (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/parport/parport.ko): Operation not permitted
>  WARNING: Error running install command for parport
>  FATAL: Error inserting parport_pc (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/parport/parport_pc.ko): Operation not permitted
>----- return code: ? -----
>>> misc.1.3: read floppy
>  read_block0: open(/dev/fd0) failed
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  01f0-01f7 : ide0
>  03c0-03df : vesafb
>  03f6-03f6 : ide0
>  03f8-03ff : serial
>  0400-040f : i2c-ali1563
>  0800-083f : 0000:00:03.1
>    0800-0803 : PM1a_EVT_BLK
>    0804-0805 : PM1a_CNT_BLK
>    0808-080b : PM_TMR
>    0810-0815 : ACPI CPU throttle
>    0818-0827 : GPE0_BLK
>    0830-0830 : PM2_CNT_BLK
>  0cf8-0cff : PCI conf1
>  0e00-0e03 : 0000:00:0e.1
>    0e00-0e03 : sata_uli
>  0e80-0e87 : 0000:00:0e.1
>    0e80-0e87 : sata_uli
>  0f00-0f03 : 0000:00:0e.1
>    0f00-0f03 : sata_uli
>  0f80-0f87 : 0000:00:0e.1
>    0f80-0f87 : sata_uli
>  c000-cfff : PCI Bus #02
>    cc00-cc7f : 0000:02:06.0
>      cc00-cc7f : via-rhine
>  d880-d88f : 0000:00:0e.1
>    d880-d88f : sata_uli
>  e400-e4ff : 0000:00:0d.0
>    e400-e4ff : tulip
>  e800-e8ff : 0000:00:04.0
>    e800-e8ff : ALi M5455
>  ff00-ff0f : 0000:00:0e.0
>    ff00-ff07 : ide0
>    ff08-ff0f : ide1
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    0:     457502    IO-APIC-edge  timer
>    1:         14    IO-APIC-edge  i8042
>    8:          0    IO-APIC-edge  rtc
>    9:          0   IO-APIC-level  acpi
>   14:      16287    IO-APIC-edge  ide0
>  169:       9689   IO-APIC-level  libata
>  177:        160   IO-APIC-level  ohci_hcd:usb1
>  185:         26   IO-APIC-level  ohci_hcd:usb2
>  201:          0   IO-APIC-level  ohci_hcd:usb3
>  209:      27098   IO-APIC-level  ALi M5455, eth0
>  217:          4   IO-APIC-level  ehci_hcd:usb4
>  NMI:         60 
>  LOC:     457434 
>  ERR:          0
>  MIS:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: AuthenticAMD
>  cpu family	: 15
>  model		: 15
>  model name	: AMD Athlon(tm) 64 Processor 3500+
>  stepping	: 0
>  cpu MHz		: 999.992
>  cache size	: 512 KB
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 1
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow
>  bogomips	: 2001.56
>  TLB size	: 1024 4K pages
>  clflush size	: 64
>  cache_alignment	: 64
>  address sizes	: 40 bits physical, 48 bits virtual
>  power management: ts fid vid ttp
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x1ffb0000
>  klog mem 0: 0x0
>  klog mem 1: 0x0
>  klog mem:   0x0
> -- <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> -- <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> -- <4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> -- <4> BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
> -- <4> BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
> -- <4> BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
> -- <4> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
> -- <4> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
> -- <7>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000f98b0
>  bios mem:   0x1ff4fc00
>  meminfo:    0x1f057000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0xaa4f97078fd9b7b9) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:0e.0/ide0/0.1
>     ALI15x3_IDE: /devices/pci0000:00/0000:00:0e.0
>       Intel ICH: /devices/pci0000:00/0000:00:04.0
>   agpgart-amd64: /devices/pci0000:00/0000:00:00.0
>     ali1563_i2c: /devices/pci0000:00/0000:00:03.0
>        ehci_hcd: /devices/pci0000:00/0000:00:0f.3
>        ohci_hcd: /devices/pci0000:00/0000:00:0f.0
>        ohci_hcd: /devices/pci0000:00/0000:00:0f.1
>        ohci_hcd: /devices/pci0000:00/0000:00:0f.2
>        sata_uli: /devices/pci0000:00/0000:00:0e.1
>           tulip: /devices/pci0000:00/0000:00:0d.0
>       via-rhine: /devices/pci0000:00/0000:00:02.0/0000:02:06.0
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>              sd: /devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0
>           atkbd: /devices/platform/i8042/serio1
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:0f.0/usb1/1-1/1-1:1.0
>             hub: /devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0
>             hub: /devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0
>             hub: /devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0
>             hub: /module/usbcore
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0
>          usbhid: /module/usbhid
>           usblp: /devices/pci0000:00/0000:00:0f.0/usb1/1-2/1-2:1.0
>           usblp: /module/usblp
>             usb: /devices/pci0000:00/0000:00:0f.0/usb1/1-1
>             usb: /devices/pci0000:00/0000:00:0f.0/usb1/1-2
>             usb: /devices/pci0000:00/0000:00:0f.1/usb2/2-1
>             usb: /devices/pci0000:00/0000:00:0f.0/usb1
>             usb: /devices/pci0000:00/0000:00:0f.1/usb2
>             usb: /devices/pci0000:00/0000:00:0f.2/usb3
>             usb: /devices/pci0000:00/0000:00:0f.3/usb4
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    modalias = "pci:v000010B9d00001689sv00000000sd00000000bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x10b9
>    device = 0x1689
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    res[0] = 0xf8000000 0xfbffffff 0x1208
>    config[64]
>  pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0
>    modalias = "pci:v000010B9d00005246sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x10b9
>    device = 0x5246
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:02.0, bus_id = 0000:00:02.0, bus = pci
>    path = /devices/pci0000:00/0000:00:02.0
>    modalias = "pci:v000010B9d00005249sv00000000sd00000000bc06sc04i01
>"
>    class = 0x60401
>    vendor = 0x10b9
>    device = 0x5249
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:03.0, bus_id = 0000:00:03.0, bus = pci
>    path = /devices/pci0000:00/0000:00:03.0
>    modalias = "pci:v000010B9d00001563sv00001849sd00001563bc06sc01i00
>"
>    class = 0x60100
>    vendor = 0x10b9
>    device = 0x1563
>    subvendor = 0x1849
>    subdevice = 0x1563
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:03.1, bus_id = 0000:00:03.1, bus = pci
>    path = /devices/pci0000:00/0000:00:03.1
>    modalias = "pci:v000010B9d00007101sv00001849sd00007101bc06sc80i00
>"
>    class = 0x68000
>    vendor = 0x10b9
>    device = 0x7101
>    subvendor = 0x1849
>    subdevice = 0x7101
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:04.0, bus_id = 0000:00:04.0, bus = pci
>    path = /devices/pci0000:00/0000:00:04.0
>    modalias = "pci:v000010B9d00005455sv00001849sd00000850bc04sc01i00
>"
>    class = 0x40100
>    vendor = 0x10b9
>    device = 0x5455
>    subvendor = 0x1849
>    subdevice = 0x850
>    irq = 209
>    res[0] = 0xe800 0xe8ff 0x101
>    res[1] = 0xfebff000 0xfebfffff 0x200
>    config[64]
>  pci device: name = 0000:00:0d.0, bus_id = 0000:00:0d.0, bus = pci
>    path = /devices/pci0000:00/0000:00:0d.0
>    modalias = "pci:v000010B9d00005263sv00001849sd00005263bc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x10b9
>    device = 0x5263
>    subvendor = 0x1849
>    subdevice = 0x5263
>    irq = 193
>    res[0] = 0xe400 0xe4ff 0x101
>    res[1] = 0xfebfec00 0xfebfecff 0x200
>    config[64]
>  pci device: name = 0000:00:0e.0, bus_id = 0000:00:0e.0, bus = pci
>    path = /devices/pci0000:00/0000:00:0e.0
>    modalias = "pci:v000010B9d00005229sv000010B9sd00005229bc01sc01ifa
>"
>    class = 0x101fa
>    vendor = 0x10b9
>    device = 0x5229
>    subvendor = 0x10b9
>    subdevice = 0x5229
>    irq = 169
>    res[4] = 0xff00 0xff0f 0x101
>    config[64]
>  pci device: name = 0000:00:0e.1, bus_id = 0000:00:0e.1, bus = pci
>    path = /devices/pci0000:00/0000:00:0e.1
>    modalias = "pci:v000010B9d00005289sv00001849sd00005289bc01sc80i8f
>"
>    class = 0x1808f
>    vendor = 0x10b9
>    device = 0x5289
>    subvendor = 0x1849
>    subdevice = 0x5289
>    irq = 169
>    res[0] = 0xf80 0xf87 0x101
>    res[1] = 0xf00 0xf03 0x101
>    res[2] = 0xe80 0xe87 0x101
>    res[3] = 0xe00 0xe03 0x101
>    res[4] = 0xd880 0xd88f 0x101
>    config[64]
>  pci device: name = 0000:00:0f.0, bus_id = 0000:00:0f.0, bus = pci
>    path = /devices/pci0000:00/0000:00:0f.0
>    modalias = "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10
>"
>    class = 0xc0310
>    vendor = 0x10b9
>    device = 0x5237
>    subvendor = 0x1849
>    subdevice = 0x5237
>    irq = 177
>    res[0] = 0xfebfd000 0xfebfdfff 0x200
>    config[64]
>  pci device: name = 0000:00:0f.1, bus_id = 0000:00:0f.1, bus = pci
>    path = /devices/pci0000:00/0000:00:0f.1
>    modalias = "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10
>"
>    class = 0xc0310
>    vendor = 0x10b9
>    device = 0x5237
>    subvendor = 0x1849
>    subdevice = 0x5237
>    irq = 185
>    res[0] = 0xfebfc000 0xfebfcfff 0x200
>    config[64]
>  pci device: name = 0000:00:0f.2, bus_id = 0000:00:0f.2, bus = pci
>    path = /devices/pci0000:00/0000:00:0f.2
>    modalias = "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10
>"
>    class = 0xc0310
>    vendor = 0x10b9
>    device = 0x5237
>    subvendor = 0x1849
>    subdevice = 0x5237
>    irq = 201
>    res[0] = 0xfebfb000 0xfebfbfff 0x200
>    config[64]
>  pci device: name = 0000:00:0f.3, bus_id = 0000:00:0f.3, bus = pci
>    path = /devices/pci0000:00/0000:00:0f.3
>    modalias = "pci:v000010B9d00005239sv00001849sd00005239bc0Csc03i20
>"
>    class = 0xc0320
>    vendor = 0x10b9
>    device = 0x5239
>    subvendor = 0x1849
>    subdevice = 0x5239
>    irq = 217
>    res[0] = 0xfebfe800 0xfebfe8ff 0x200
>    config[64]
>  pci device: name = 0000:00:18.0, bus_id = 0000:00:18.0, bus = pci
>    path = /devices/pci0000:00/0000:00:18.0
>    modalias = "pci:v00001022d00001100sv00000000sd00000000bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x1022
>    device = 0x1100
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:18.1, bus_id = 0000:00:18.1, bus = pci
>    path = /devices/pci0000:00/0000:00:18.1
>    modalias = "pci:v00001022d00001101sv00000000sd00000000bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x1022
>    device = 0x1101
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:18.2, bus_id = 0000:00:18.2, bus = pci
>    path = /devices/pci0000:00/0000:00:18.2
>    modalias = "pci:v00001022d00001102sv00000000sd00000000bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x1022
>    device = 0x1102
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:18.3, bus_id = 0000:00:18.3, bus = pci
>    path = /devices/pci0000:00/0000:00:18.3
>    modalias = "pci:v00001022d00001103sv00000000sd00000000bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x1022
>    device = 0x1103
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:01:00.0, bus_id = 0000:01:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>    modalias = "pci:v000010DEd0000002Dsv00001462sd00008808bc03sc00i00
>"
>    class = 0x30000
>    vendor = 0x10de
>    device = 0x2d
>    subvendor = 0x1462
>    subdevice = 0x8808
>    irq = 225
>    res[0] = 0xfd000000 0xfdffffff 0x200
>    res[1] = 0xf2000000 0xf3ffffff 0x1208
>    res[6] = 0xf0800000 0xf080ffff 0x7202
>    config[64]
>  pci device: name = 0000:02:06.0, bus_id = 0000:02:06.0, bus = pci
>    path = /devices/pci0000:00/0000:00:02.0/0000:02:06.0
>    modalias = "pci:v00001106d00003043sv00001186sd00001400bc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x1106
>    device = 0x3043
>    subvendor = 0x1186
>    subdevice = 0x1400
>    irq = 209
>    res[0] = 0xcc00 0xcc7f 0x101
>    res[1] = 0xfeaffc00 0xfeaffc7f 0x200
>    res[6] = 0x20000000 0x2000ffff 0x7200
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 10b9:1689:0000:0000:00
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  addr0 f8000000, size 04000000
>  00: b9 10 89 16 06 01 10 00 00 00 00 06 00 00 00 00  "................"
>  10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00  "....@..........."
>
>bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 10b9:5246:0000:0000:00
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: b9 10 46 52 07 01 20 00 00 00 04 06 00 00 01 00  "..FR.. ........."
>  10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 20 22  "...........@.. ""
>  20: 90 fc 90 fe 80 f0 70 f4 00 00 00 00 00 00 00 00  "......p........."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0b 00  "................"
>
>bus 00->02, slot 02, func 0, vend:dev:s_vend:s_dev:rev 10b9:5249:0000:0000:00
>class 06, sub_class 04 prog_if 01, hdr 1, flags <>, irq 0
>  00: b9 10 49 52 07 01 00 00 00 01 04 06 00 00 01 00  "..IR............"
>  10: 00 00 00 00 00 00 00 00 00 02 02 20 c0 c0 00 22  "........... ...""
>  20: a0 fe a0 fe 00 20 00 20 00 00 00 00 00 00 00 00  "..... . ........"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00  "................"
>
>bus 00, slot 03, func 0, vend:dev:s_vend:s_dev:rev 10b9:1563:1849:1563:70
>class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
>  00: b9 10 63 15 0f 00 00 02 70 00 01 06 00 00 80 00  "..c.....p......."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 63 15  "............I.c."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 18  "................"
>
>bus 00, slot 03, func 1, vend:dev:s_vend:s_dev:rev 10b9:7101:1849:7101:00
>class 06, sub_class 80 prog_if 00, hdr 0, flags <>, irq 0
>  00: b9 10 01 71 00 00 00 02 00 00 80 06 00 00 80 00  "...q............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 01 71  "............I..q"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 04, func 0, vend:dev:s_vend:s_dev:rev 10b9:5455:1849:0850:20
>class 04, sub_class 01 prog_if 00, hdr 0, flags <>, irq 209
>  addr0 0000e800, size 00000100
>  addr1 febff000, size 00001000
>  00: b9 10 55 54 17 00 10 02 20 00 01 04 10 20 00 00  "..UT.... .... .."
>  10: 01 e8 00 00 00 f0 bf fe 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 50 08  "............I.P."
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 40 00  "....@.........@."
>
>bus 00, slot 0d, func 0, vend:dev:s_vend:s_dev:rev 10b9:5263:1849:5263:40
>class 02, sub_class 00 prog_if 00, hdr 0, flags <>, irq 193
>  addr0 0000e400, size 00000100
>  addr1 febfec00, size 00000100
>  00: b9 10 63 52 07 01 10 02 40 00 00 02 08 20 00 00  "..cR....@.... .."
>  10: 01 e4 00 00 00 ec bf fe 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 63 52  "............I.cR"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 14 28  "....P..........("
>
>bus 00, slot 0e, func 0, vend:dev:s_vend:s_dev:rev 10b9:5229:10b9:5229:c7
>class 01, sub_class 01 prog_if fa, hdr 0, flags <>, irq 169
>  addr4 0000ff00, size 00000010
>  00: b9 10 29 52 05 00 a0 02 c7 fa 01 01 00 20 80 00  "..)R......... .."
>  10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00  "........q...u..."
>  20: 01 ff 00 00 00 00 00 00 00 00 00 00 b9 10 29 52  "..............)R"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00  "................"
>
>bus 00, slot 0e, func 1, vend:dev:s_vend:s_dev:rev 10b9:5289:1849:5289:10
>class 01, sub_class 80 prog_if 8f, hdr 0, flags <>, irq 169
>  addr0 00000f80, size 00000008
>  addr1 00000f00, size 00000004
>  addr2 00000e80, size 00000008
>  addr3 00000e00, size 00000004
>  addr4 0000d880, size 00000010
>  00: b9 10 89 52 05 01 a0 02 10 8f 80 01 80 80 80 00  "...R............"
>  10: 81 0f 00 00 01 0f 00 00 81 0e 00 00 01 0e 00 00  "................"
>  20: 81 d8 00 00 00 00 00 00 00 00 00 00 49 18 89 52  "............I..R"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00  "................"
>
>bus 00, slot 0f, func 0, vend:dev:s_vend:s_dev:rev 10b9:5237:1849:5237:03
>class 0c, sub_class 03 prog_if 10, hdr 0, flags <>, irq 177
>  addr0 febfd000, size 00001000
>  00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00  "..7R......... .."
>  10: 00 d0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52  "............I.7R"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 50  "...............P"
>
>bus 00, slot 0f, func 1, vend:dev:s_vend:s_dev:rev 10b9:5237:1849:5237:03
>class 0c, sub_class 03 prog_if 10, hdr 0, flags <>, irq 185
>  addr0 febfc000, size 00001000
>  00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00  "..7R......... .."
>  10: 00 c0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52  "............I.7R"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 50  "...............P"
>
>bus 00, slot 0f, func 2, vend:dev:s_vend:s_dev:rev 10b9:5237:1849:5237:03
>class 0c, sub_class 03 prog_if 10, hdr 0, flags <>, irq 201
>  addr0 febfb000, size 00001000
>  00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00  "..7R......... .."
>  10: 00 b0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52  "............I.7R"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 50  "...............P"
>
>bus 00, slot 0f, func 3, vend:dev:s_vend:s_dev:rev 10b9:5239:1849:5239:01
>class 0c, sub_class 03 prog_if 20, hdr 0, flags <>, irq 217
>  addr0 febfe800, size 00000100
>  00: b9 10 39 52 16 01 b0 02 01 20 03 0c 10 20 80 00  "..9R..... ... .."
>  10: 00 e8 bf fe 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 39 52  "............I.9R"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 10 20  "....P.......... "
>
>bus 00, slot 18, func 0, vend:dev:s_vend:s_dev:rev 1022:1100:0000:0000:00
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00  ""..............."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 18, func 1, vend:dev:s_vend:s_dev:rev 1022:1101:0000:0000:00
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00  ""..............."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 18, func 2, vend:dev:s_vend:s_dev:rev 1022:1102:0000:0000:00
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00  ""..............."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 18, func 3, vend:dev:s_vend:s_dev:rev 1022:1103:0000:0000:00
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00  ""..............."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 01, slot 00, func 0, vend:dev:s_vend:s_dev:rev 10de:002d:1462:8808:15
>class 03, sub_class 00 prog_if 00, hdr 0, flags <>, irq 225
>  addr0 fd000000, size 01000000
>  addr1 f2000000, size 02000000
>  00: de 10 2d 00 07 00 b0 02 15 00 00 03 00 20 00 00  "..-.......... .."
>  10: 00 00 00 fd 08 00 00 f2 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 08 88  "............b..."
>  30: 00 00 80 f0 60 00 00 00 00 00 00 00 0a 01 05 01  "....`..........."
>
>bus 02, slot 06, func 0, vend:dev:s_vend:s_dev:rev 1106:3043:1186:1400:06
>class 02, sub_class 00 prog_if 00, hdr 0, flags <>, irq 209
>  addr0 0000cc00, size 00000080
>  addr1 feaffc00, size 00000080
>  00: 06 11 43 30 17 01 00 02 06 00 00 02 10 20 00 00  "..C0......... .."
>  10: 01 cc 00 00 00 fc af fe 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 86 11 00 14  "................"
>  30: 00 00 00 20 00 00 00 00 00 00 00 00 01 01 76 98  "... ..........v."
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> monitor.1: ddc
>>> pcmcia.1: sysfs drivers
>>> pcmcia.2: pcmcia
>sysfs: no such bus: pcmcia
>>> serial.1: read info
>----- serial info -----
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:1 0x03c0 - 0x03df (0x20) "vesafb"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:1 0x03f8 - 0x03ff (0x08) "serial"
>i/o:0 0x0400 - 0x040f (0x10) "i2c-ali1563"
>i/o:0 0x0800 - 0x083f (0x40) "0000:00:03.1"
>i/o:0 0x0800 - 0x0803 (0x04) "PM1a_EVT_BLK"
>i/o:0 0x0804 - 0x0805 (0x02) "PM1a_CNT_BLK"
>i/o:0 0x0808 - 0x080b (0x04) "PM_TMR"
>i/o:0 0x0810 - 0x0815 (0x06) "ACPI CPU throttle"
>i/o:0 0x0818 - 0x0827 (0x10) "GPE0_BLK"
>i/o:0 0x0830 - 0x0830 (0x01) "PM2_CNT_BLK"
>i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
>i/o:0 0x0e00 - 0x0e03 (0x04) "0000:00:0e.1"
>i/o:0 0x0e00 - 0x0e03 (0x04) "sata_uli"
>i/o:0 0x0e80 - 0x0e87 (0x08) "0000:00:0e.1"
>i/o:0 0x0e80 - 0x0e87 (0x08) "sata_uli"
>i/o:0 0x0f00 - 0x0f03 (0x04) "0000:00:0e.1"
>i/o:0 0x0f00 - 0x0f03 (0x04) "sata_uli"
>i/o:0 0x0f80 - 0x0f87 (0x08) "0000:00:0e.1"
>i/o:0 0x0f80 - 0x0f87 (0x08) "sata_uli"
>i/o:0 0xc000 - 0xcfff (0x1000) "PCI Bus #02"
>i/o:0 0xcc00 - 0xcc7f (0x80) "0000:02:06.0"
>i/o:0 0xcc00 - 0xcc7f (0x80) "via-rhine"
>i/o:0 0xd880 - 0xd88f (0x10) "0000:00:0e.1"
>i/o:0 0xd880 - 0xd88f (0x10) "sata_uli"
>i/o:0 0xe400 - 0xe4ff (0x100) "0000:00:0d.0"
>i/o:0 0xe400 - 0xe4ff (0x100) "tulip"
>i/o:0 0xe800 - 0xe8ff (0x100) "0000:00:04.0"
>i/o:0 0xe800 - 0xe8ff (0x100) "ALi M5455"
>i/o:0 0xff00 - 0xff0f (0x10) "0000:00:0e.0"
>i/o:1 0xff00 - 0xff07 (0x08) "ide0"
>i/o:1 0xff08 - 0xff0f (0x08) "ide1"
>irq:1  0 (   457502) "timer"
>irq:0  1 (       14) "i8042"
>irq:1  8 (        0) "rtc"
>irq:0  9 (        0) "acpi"
>irq:1 14 (    16287) "ide0"
>irq:0 169 (     9689) "libata"
>irq:0 177 (      160) "ohci_hcd:usb1"
>irq:0 185 (       26) "ohci_hcd:usb2"
>irq:0 201 (        0) "ohci_hcd:usb3"
>irq:0 209 (    27098) "ALi M5455" "eth0"
>irq:0 217 (        4) "ehci_hcd:usb4"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/modprobe parport_pc" -----
>  FATAL: Error inserting parport (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/parport/parport.ko): Operation not permitted
>  WARNING: Error running install command for parport
>  FATAL: Error inserting parport_pc (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/parport/parport_pc.ko): Operation not permitted
>----- return code: ? -----
>----- exec: "/sbin/modprobe lp" -----
>  FATAL: Error inserting parport (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/parport/parport.ko): Operation not permitted
>  WARNING: Error running install command for parport
>  FATAL: Error inserting lp (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/char/lp.ko): Operation not permitted
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>----- exec: "/sbin/modprobe sr_mod " -----
>  FATAL: Error inserting sr_mod (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/scsi/sr_mod.ko): Operation not permitted
>----- return code: ? -----
>----- exec: "/sbin/modprobe st " -----
>  FATAL: Error inserting st (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/scsi/st.ko): Operation not permitted
>----- return code: ? -----
>>> block.2: sysfs drivers
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:		hdb
>drive speed:		48
>drive # of slots:	1
>Can close tray:		1
>Can open tray:		1
>Can lock tray:		1
>Can change speed:	1
>Can select disk:	0
>Can read multisession:	1
>Can read MCN:		1
>Reports media changed:	1
>Can play audio:		1
>Can write CD-R:		0
>Can write CD-RW:	0
>Can read DVD:		1
>Can write DVD-R:	0
>Can write DVD-RAM:	0
>Can read MRW:		1
>Can write MRW:		1
>Can write RAM:		1
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     8     0   80418240 sda
>     8     1    1052226 sda1
>     8     2    5245222 sda2
>     8     3   74107845 sda3
>----- /proc/partitions end -----
>disks:
>  sda
>partitions:
>  sda1
>  sda2
>  sda3
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.1 path = /devices/pci0000:00/0000:00:0e.0/ide0/0.1
>  block: name = fd0, path = /block/fd0
>    dev = 2:0
>    range = 1
>    block device: bus = platform, bus_id = floppy.0 driver = unknown
>      path = /devices/platform/floppy.0
>  block: name = hdb, path = /block/hdb
>    dev = 3:64
>    range = 1
>    block device: bus = ide, bus_id = 0.1 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:0e.0/ide0/0.1
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = md0, path = /block/md0
>    dev = 9:0
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>  block: name = sda, path = /block/sda
>    dev = 8:0
>    range = 16
>    block device: bus = scsi, bus_id = 0:0:0:0 driver = sd
>      path = /devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0
>    vendor = ATA
>    model = HDS722580VLSA80
>    rev = V32O
>    type = 0
>>> block.5: /dev/sda
>>> scsi.1: scsi modules
>----- exec: "/sbin/modprobe sg " -----
>  FATAL: Error inserting sg (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/scsi/sg.ko): Operation not permitted
>----- return code: ? -----
>>> scsi.2: scsi tape
>sysfs: no such class: scsi_tape
>>> scsi.3: scsi generic
>sysfs: no such class: scsi_generic
>>> usb.1: sysfs drivers
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:0f.0/usb1/1-1
>  usb dev: /devices/pci0000:00/0000:00:0f.0/usb1/1-2
>  usb dev: /devices/pci0000:00/0000:00:0f.1/usb2/2-1
>  usb dev: /devices/pci0000:00/0000:00:0f.0/usb1
>  usb dev: /devices/pci0000:00/0000:00:0f.1/usb2
>  usb dev: /devices/pci0000:00/0000:00:0f.2/usb3
>  usb dev: /devices/pci0000:00/0000:00:0f.3/usb4
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:0f.0/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-rc6-git13-4-default ohci_hcd"
>    product = "OHCI Host Controller"
>    serial = "0000:00:0f.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 1-1:1.0, bus_id = 1-1:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.0/usb1/1-1/1-1:1.0
>    modalias = "usb:v0451p1446d0110dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-1:1.0 @ /devices/pci0000:00/0000:00:0f.0/usb1/1-1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0451
>    idProduct = 0x1446
>    bcdDevice = 0110
>    speed = "12"
>  usb device: name = 1-1, bus_id = 1-1, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.0/usb1/1-1
>  usb device: name = 1-2:1.0, bus_id = 1-2:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.0/usb1/1-2/1-2:1.0
>    modalias = "usb:v04B8p0005d0100dc00dsc00dp00ic07isc01ip02"
>    bInterfaceNumber = 0
>    bInterfaceClass = 7
>    bInterfaceSubClass = 1
>    bInterfaceProtocol = 2
>    if: 1-2:1.0 @ /devices/pci0000:00/0000:00:0f.0/usb1/1-2
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x04b8
>    idProduct = 0x0005
>    manufacturer = "EPSON"
>    product = "USB Printer"
>    serial = "L84NO0009270827130"
>    bcdDevice = 0100
>    speed = "12"
>  usb device: name = 1-2, bus_id = 1-2, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.0/usb1/1-2
>  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:0f.1/usb2
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-rc6-git13-4-default ohci_hcd"
>    product = "OHCI Host Controller"
>    serial = "0000:00:0f.1"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 2-1:1.0, bus_id = 2-1:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0
>    modalias = "usb:v1241p1111d0100dc00dsc00dp00ic03isc01ip02"
>    bInterfaceNumber = 0
>    bInterfaceClass = 3
>    bInterfaceSubClass = 1
>    bInterfaceProtocol = 2
>    if: 2-1:1.0 @ /devices/pci0000:00/0000:00:0f.1/usb2/2-1
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x1241
>    idProduct = 0x1111
>    bcdDevice = 0100
>    speed = "1.5"
>  usb device: name = 2-1, bus_id = 2-1, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1
>  usb device: name = 3-0:1.0, bus_id = 3-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 3-0:1.0 @ /devices/pci0000:00/0000:00:0f.2/usb3
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-rc6-git13-4-default ohci_hcd"
>    product = "OHCI Host Controller"
>    serial = "0000:00:0f.2"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 4-0:1.0, bus_id = 4-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 4-0:1.0 @ /devices/pci0000:00/0000:00:0f.3/usb4
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 1
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-rc6-git13-4-default ehci_hcd"
>    product = "EHCI Host Controller"
>    serial = "0000:00:0f.3"
>    bcdDevice = 0206
>    speed = "480"
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.0/usb1
>  usb device: name = usb2, bus_id = usb2, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.1/usb2
>  usb device: name = usb3, bus_id = usb3, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.2/usb3
>  usb device: name = usb4, bus_id = usb4, bus = usb
>    path = /devices/pci0000:00/0000:00:0f.3/usb4
>>> usb.3.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>  FATAL: Error inserting joydev (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/input/joydev.ko): Operation not permitted
>----- return code: ? -----
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/event0
>    dev = 13:64
>  input: name = event1, path = /class/input/event1
>    dev = 13:65
>    input device: bus = serio, bus_id = serio1 driver = atkbd
>      path = /devices/platform/i8042/serio1
>  input: name = event2, path = /class/input/event2
>    dev = 13:66
>    input device: bus = usb, bus_id = 2-1:1.0 driver = usbhid
>      path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0
>  input: name = mice, path = /class/input/mice
>    dev = 13:63
>  input: name = mouse0, path = /class/input/mouse0
>    dev = 13:32
>    input device: bus = usb, bus_id = 2-1:1.0 driver = usbhid
>      path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0
>>> usb.3.4: lp
>  usb: name = lp0, path = /class/usb/lp0
>    dev = 180:0
>    usb device: bus = usb, bus_id = 1-2:1.0 driver = usblp
>      path = /devices/pci0000:00/0000:00:0f.0/usb1/1-2/1-2:1.0
>>> usb.3.5: serial
>>> edd.1: edd mod
>>> edd.2: edd info
>edd: 0x80
>  size: 160836478
>  chs default: 10011/255/63
>  chs legacy: 1024/255/63
>  caps: fixed 
>  attached: #0 
>>> modem.1: serial
>******  started child process 6025 (15s/120s)  ******
>******  stopped child process 6025 (120s)  ******
>>> mouse.2: serial
>******  started child process 6026 (20s/20s)  ******
>******  stopped child process 6026 (20s)  ******
>>> input.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>  FATAL: Error inserting joydev (/lib/modules/2.6.13-rc6-git13-4-default/kernel/drivers/input/joydev.ko): Operation not permitted
>----- return code: ? -----
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  H: Handlers=kbd event0 
>  B: EV=40001 
>  B: SND=6 
>  
>  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
>  N: Name="AT Translated Set 2 keyboard"
>  P: Phys=isa0060/serio0/input0
>  H: Handlers=kbd event1 
>  B: EV=120013 
>  B: KEY=402000000 3802078f840d001 f2ffffdfffefffff fffffffffffffffe 
>  B: MSC=10 
>  B: LED=7 
>  
>  I: Bus=0003 Vendor=1241 Product=1111 Version=0100
>  N: Name="1241:1111"
>  P: Phys=usb-0000:00:0f.1-1/input0
>  H: Handlers=mouse0 event2 
>  B: EV=7 
>  B: KEY=70000 0 0 0 0 
>  B: REL=103 
>  
>----- /proc/bus/input/devices end -----
>bus = 16, name = PC Speaker
>  handlers = kbd event0
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = AT Translated Set 2 keyboard
>  handlers = kbd event1
>  key = 02000000f840d001ffeffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 3, name = 1241:1111
>  handlers = mouse0 event2
>  key = 0007000000000000000000000000000000000000
>  rel = 00000103
>  mouse buttons = 0
>  mouse wheels = 1
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: AuthenticAMD
>  cpu family	: 15
>  model		: 15
>  model name	: AMD Athlon(tm) 64 Processor 3500+
>  stepping	: 0
>  cpu MHz		: 999.992
>  cache size	: 512 KB
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 1
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow
>  bogomips	: 2001.56
>  TLB size	: 1024 4K pages
>  clflush size	: 64
>  cache_alignment	: 64
>  address sizes	: 40 bits physical, 48 bits virtual
>  power management: ts fid vid ttp
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>>> fb.1: read info
>>> net.1: get network data
>  net interface: name = eth0, classname = net, path = /class/net/eth0
>    type = 1
>    hw_addr = 00:50:ba:c3:b5:1b
>    net device: path = /devices/pci0000:00/0000:00:02.0/0000:02:06.0
>    GDRVINFO ethtool error: Operation not permitted
>  net interface: name = eth2, classname = net, path = /class/net/eth2
>    type = 1
>    hw_addr = 00:0b:6a:7b:ad:7b
>    net device: path = /devices/pci0000:00/0000:00:0d.0
>    GDRVINFO ethtool error: Operation not permitted
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  net interface: name = sit0, classname = net, path = /class/net/sit0
>    type = 776
>    hw_addr = 00:00:00:00
>  eth0: GLINK ethtool error: Operation not permitted
>  eth2: GLINK ethtool error: Operation not permitted
>  lo: GLINK ethtool error: Operation not permitted
>  sit0: GLINK ethtool error: Operation not permitted
>>> pppoe.1: looking for pppoe
>>> pppoe.2: discovery
>eth0: socket failed: Operation not permitted
>eth2: socket failed: Operation not permitted
>>> 38.1: detecting wlan features
>>> 38.2: assign udi
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4.1: /dev/sda
>  read_block0: open(/dev/sda) failed
>>> int.4: floppy
>>> int.5: bios
>  bios ctrl 0: 21
>>> int.6: mouse
>>> int.15: system info
>  system type:
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P:/class/input/event0
>  N:input/event0
>  M:13:64
>  P:/class/input/mice
>  N:input/mice
>  M:13:63
>  P:/class/input/event1
>  N:input/event1
>  M:13:65
>  P:/block/sda/sda1
>  N:sda1
>  S:disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part1
>  S:disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part1
>  M:8:1
>  E:ID_VENDOR=ATA
>  E:ID_MODEL=HDS722580VLSA80
>  E:ID_REVISION=V32O
>  E:ID_SERIAL=SATA_HDS722580VLSA80_VN6BHECBDYJ8YD
>  E:ID_TYPE=disk
>  E:ID_BUS=scsi
>  E:ID_PATH=pci-0000:00:0e.1-scsi-0:0:0:0
>  E:ID_FS_USAGE=other
>  E:ID_FS_TYPE=swap
>  E:ID_FS_VERSION=2
>  E:ID_FS_UUID=
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/sda/sda3
>  N:sda3
>  S:disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part3
>  S:disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part3
>  S:disk/by-uuid/4e557ca8-6263-4b1f-96fb-73bb416727c0
>  M:8:3
>  E:ID_VENDOR=ATA
>  E:ID_MODEL=HDS722580VLSA80
>  E:ID_REVISION=V32O
>  E:ID_SERIAL=SATA_HDS722580VLSA80_VN6BHECBDYJ8YD
>  E:ID_TYPE=disk
>  E:ID_BUS=scsi
>  E:ID_PATH=pci-0000:00:0e.1-scsi-0:0:0:0
>  E:ID_FS_USAGE=filesystem
>  E:ID_FS_TYPE=ext3
>  E:ID_FS_VERSION=
>  E:ID_FS_UUID=4e557ca8-6263-4b1f-96fb-73bb416727c0
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/sda/sda2
>  N:sda2
>  S:disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part2
>  S:disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part2
>  S:disk/by-uuid/d2dbbcfd-5339-4e44-8ab2-04f5a0aae7d0
>  M:8:2
>  E:ID_VENDOR=ATA
>  E:ID_MODEL=HDS722580VLSA80
>  E:ID_REVISION=V32O
>  E:ID_SERIAL=SATA_HDS722580VLSA80_VN6BHECBDYJ8YD
>  E:ID_TYPE=disk
>  E:ID_BUS=scsi
>  E:ID_PATH=pci-0000:00:0e.1-scsi-0:0:0:0
>  E:ID_FS_USAGE=filesystem
>  E:ID_FS_TYPE=ext3
>  E:ID_FS_VERSION=
>  E:ID_FS_UUID=d2dbbcfd-5339-4e44-8ab2-04f5a0aae7d0
>  E:ID_FS_LABEL=
>  E:ID_FS_LABEL_SAFE=
>  P:/block/sda
>  N:sda
>  S:disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD
>  S:disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0
>  M:8:0
>  E:ID_VENDOR=ATA
>  E:ID_MODEL=HDS722580VLSA80
>  E:ID_REVISION=V32O
>  E:ID_SERIAL=SATA_HDS722580VLSA80_VN6BHECBDYJ8YD
>  E:ID_TYPE=disk
>  E:ID_BUS=scsi
>  E:ID_PATH=pci-0000:00:0e.1-scsi-0:0:0:0
>  P:/block/hdb
>  N:hdb
>  S:dvd
>  S:cdrom
>  S:disk/by-path/pci-0000:00:0e.0-ide-0:1
>  M:3:64
>  E:ID_TYPE=cd
>  E:ID_MODEL=LITE-ON_DVD_SOHD-167T
>  E:ID_SERIAL=
>  E:ID_REVISION=9S15
>  E:ID_BUS=ata
>  E:ID_PATH=pci-0000:00:0e.0-ide-0:1
>  P:/class/sound/timer
>  N:snd/timer
>  M:116:33
>  P:/class/usb_device/usbdev1.1
>  N:usbdev1.1
>  S:bus/usb/1/1
>  M:189:0
>  P:/class/sound/pcmC0D2p
>  N:snd/pcmC0D2p
>  M:116:18
>  P:/class/sound/pcmC0D2c
>  N:snd/pcmC0D2c
>  M:116:26
>  P:/class/sound/pcmC0D1c
>  N:snd/pcmC0D1c
>  M:116:25
>  P:/class/sound/pcmC0D0p
>  N:snd/pcmC0D0p
>  M:116:16
>  P:/class/sound/pcmC0D0c
>  N:snd/pcmC0D0c
>  M:116:24
>  P:/class/sound/controlC0
>  N:snd/controlC0
>  M:116:0
>  P:/class/usb_device/usbdev3.1
>  N:usbdev3.1
>  S:bus/usb/3/1
>  M:189:256
>  P:/class/usb_device/usbdev2.1
>  N:usbdev2.1
>  S:bus/usb/2/1
>  M:189:128
>  P:/class/usb_device/usbdev1.4
>  N:usbdev1.4
>  S:bus/usb/1/4
>  M:189:3
>  P:/class/usb_device/usbdev4.1
>  N:usbdev4.1
>  S:bus/usb/4/1
>  M:189:384
>  P:/class/usb/lp0
>  N:usb/lp0
>  S:usblp0
>  M:180:0
>  P:/class/usb_device/usbdev1.5
>  N:usbdev1.5
>  S:bus/usb/1/5
>  M:189:4
>  P:/class/usb_device/usbdev2.3
>  N:usbdev2.3
>  S:bus/usb/2/3
>  M:189:130
>  P:/class/input/mouse0
>  N:input/mouse0
>  M:13:32
>  P:/class/input/event2
>  N:input/event2
>  M:13:66
>-----  udevinfo end -----
>/class/input/event0
>  name: input/event0
>/class/input/mice
>  name: input/mice
>/class/input/event1
>  name: input/event1
>/block/sda/sda1
>  name: sda1
>  links: disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part1, disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part1
>/block/sda/sda3
>  name: sda3
>  links: disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part3, disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part3, disk/by-uuid/4e557ca8-6263-4b1f-96fb-73bb416727c0
>/block/sda/sda2
>  name: sda2
>  links: disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part2, disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part2, disk/by-uuid/d2dbbcfd-5339-4e44-8ab2-04f5a0aae7d0
>/block/sda
>  name: sda
>  links: disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD, disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0
>/block/hdb
>  name: hdb
>  links: dvd, cdrom, disk/by-path/pci-0000:00:0e.0-ide-0:1
>/class/sound/timer
>  name: snd/timer
>/class/usb_device/usbdev1.1
>  name: usbdev1.1
>  links: bus/usb/1/1
>/class/sound/pcmC0D2p
>  name: snd/pcmC0D2p
>/class/sound/pcmC0D2c
>  name: snd/pcmC0D2c
>/class/sound/pcmC0D1c
>  name: snd/pcmC0D1c
>/class/sound/pcmC0D0p
>  name: snd/pcmC0D0p
>/class/sound/pcmC0D0c
>  name: snd/pcmC0D0c
>/class/sound/controlC0
>  name: snd/controlC0
>/class/usb_device/usbdev3.1
>  name: usbdev3.1
>  links: bus/usb/3/1
>/class/usb_device/usbdev2.1
>  name: usbdev2.1
>  links: bus/usb/2/1
>/class/usb_device/usbdev1.4
>  name: usbdev1.4
>  links: bus/usb/1/4
>/class/usb_device/usbdev4.1
>  name: usbdev4.1
>  links: bus/usb/4/1
>/class/usb/lp0
>  name: usb/lp0
>  links: usblp0
>/class/usb_device/usbdev1.5
>  name: usbdev1.5
>  links: bus/usb/1/5
>/class/usb_device/usbdev2.3
>  name: usbdev2.3
>  links: bus/usb/2/3
>/class/input/mouse0
>  name: input/mouse0
>/class/input/event2
>  name: input/event2
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.3wRL2_g4d2B (failed)
>  old prop read: rdCR.3wRL2_g4d2B (failed)
>  prop read: /org/freedesktop/Hal/devices/computer_storage (failed)
>  prop read: sPPV.oZ89vuho4Y3 (failed)
>  old prop read: sPPV.oZ89vuho4Y3 (failed)
>  prop read: rdCR.lZF+r4EgHp4 (failed)
>  old prop read: rdCR.lZF+r4EgHp4 (failed)
>  prop read: rdCR.n_7QNeEnh23 (failed)
>  old prop read: rdCR.n_7QNeEnh23 (failed)
>  prop read: rdCR.EMpH5pjcahD (failed)
>  old prop read: rdCR.EMpH5pjcahD (failed)
>  prop read: rdCR.f5u1ucRm+H9 (failed)
>  old prop read: rdCR.f5u1ucRm+H9 (failed)
>  prop read: rdCR.8uRK7LxiIA2 (failed)
>  old prop read: rdCR.8uRK7LxiIA2 (failed)
>  prop read: rdCR.AJKleuxpiP0 (failed)
>  old prop read: rdCR.AJKleuxpiP0 (failed)
>  prop read: rdCR.hWmSPAStPX7 (failed)
>  old prop read: rdCR.hWmSPAStPX7 (failed)
>  prop read: rdCR.9N+EecqykME (failed)
>  old prop read: rdCR.9N+EecqykME (failed)
>  prop read: rdCR.CxwsZFjVASF (failed)
>  old prop read: rdCR.CxwsZFjVASF (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_1689 (failed)
>  prop read: qLht.05BmTiV0RY9 (failed)
>  old prop read: qLht.05BmTiV0RY9 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_5246 (failed)
>  prop read: vSkL.zGxv3_xDdlC (failed)
>  old prop read: vSkL.zGxv3_xDdlC (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_5249 (failed)
>  prop read: _Znp.Xi7km9jxxp1 (failed)
>  old prop read: _Znp.Xi7km9jxxp1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_1563 (failed)
>  prop read: 3hqH.5rwKtZcxSz9 (failed)
>  old prop read: 3hqH.5rwKtZcxSz9 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_7101 (failed)
>  prop read: w+J7.egvSauENMU7 (failed)
>  old prop read: w+J7.egvSauENMU7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_5455 (failed)
>  prop read: 8otl.qAIzqAgBao4 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_5263 (failed)
>  prop read: mY_N.wnomy9rZnZ9 (failed)
>  old prop read: mY_N.wnomy9rZnZ9 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_5229 (failed)
>  prop read: vuMS.luyn6jFx3jC (failed)
>  old prop read: vuMS.luyn6jFx3jC (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_5289 (failed)
>  prop read: mDsH.a+poeoZUR54 (failed)
>  old prop read: mDsH.a+poeoZUR54 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_5237_1 (failed)
>  prop read: _+Pw.2qM5X9cC8j9 (failed)
>  old prop read: _+Pw.2qM5X9cC8j9 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_5237_0 (failed)
>  prop read: rKvl.2qM5X9cC8j9 (failed)
>  old prop read: rKvl.2qM5X9cC8j9 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_5237 (failed)
>  prop read: ifOb.2qM5X9cC8j9 (failed)
>  old prop read: ifOb.2qM5X9cC8j9 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10b9_5239 (failed)
>  prop read: a_tQ.KFUNkdo9MlF (failed)
>  old prop read: a_tQ.KFUNkdo9MlF (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1022_1100 (failed)
>  prop read: fiDB.ptk_g9XAN03 (failed)
>  old prop read: fiDB.ptk_g9XAN03 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1022_1101 (failed)
>  prop read: W1j0.KIhk9ketuO3 (failed)
>  old prop read: W1j0.KIhk9ketuO3 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1022_1102 (failed)
>  prop read: OMCs.ridUeImaQn3 (failed)
>  old prop read: OMCs.ridUeImaQn3 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_1022_1103 (failed)
>  prop read: Fhhh.M7aE7ttHy94 (failed)
>  old prop read: Fhhh.M7aE7ttHy94 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_2d (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3043 (failed)
>  prop read: rBUF.HxM3GxcLfNA (ok)
>  prop read: rdCR.7RG8lK_UzJ9 (failed)
>  old prop read: rdCR.7RG8lK_UzJ9 (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_model_LITE_ON_DVD_SOHD_167T (failed)
>  prop read: iqvy.totDbSE5y2D (failed)
>  old prop read: iqvy.totDbSE5y2D (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD (failed)
>  prop read: mE25.KXeGb94kPSE (failed)
>  old prop read: mE25.KXeGb94kPSE (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_part1_size_1077479424 (failed)
>  prop read: 1tKY.SE1wIdpsiiC (failed)
>  old prop read: 1tKY.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_d2dbbcfd_5339_4e44_8ab2_04f5a0aae7d0 (failed)
>  prop read: U2bc.SE1wIdpsiiC (failed)
>  old prop read: U2bc.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_4e557ca8_6263_4b1f_96fb_73bb416727c0 (failed)
>  prop read: xDrg.SE1wIdpsiiC (failed)
>  old prop read: xDrg.SE1wIdpsiiC (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0_if0 (failed)
>  prop read: k4bc.HMkiLJ+kI61 (failed)
>  old prop read: k4bc.HMkiLJ+kI61 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_451_1446_noserial_if0 (failed)
>  prop read: ADDn.8T3QcmdDop7 (failed)
>  old prop read: ADDn.8T3QcmdDop7 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0_printer_noserial (failed)
>  prop read: cLrx.Li3mAdnD6n6 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1_if0 (failed)
>  prop read: pBe4.25pHj3oSFO8 (failed)
>  old prop read: pBe4.25pHj3oSFO8 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0_logicaldev_input (failed)
>  prop read: FKGF._2amPdZDfg9 (failed)
>  old prop read: FKGF._2amPdZDfg9 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2_if0 (failed)
>  prop read: uIhY.ppts4qaACgF (failed)
>  old prop read: uIhY.ppts4qaACgF (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3_if0 (failed)
>  prop read: zPk0.msyeOxdEuV1 (failed)
>  old prop read: zPk0.msyeOxdEuV1 (failed)
>  prop read: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input (failed)
>  prop read: EXC1.TBWTwSuMeW2 (failed)
>  old prop read: EXC1.TBWTwSuMeW2 (failed)
>  prop read: rdCR.j8NaKXDZtZ6 (failed)
>  old prop read: rdCR.j8NaKXDZtZ6 (failed)
>  prop read: /org/freedesktop/Hal/devices/net_00_50_ba_c3_b5_1b (failed)
>  prop read: usDW.ndpeucax6V1 (failed)
>  old prop read: usDW.ndpeucax6V1 (failed)
>  prop read: /org/freedesktop/Hal/devices/net_00_0b_6a_7b_ad_7b (failed)
>  prop read: pDke.ndpeucax6V1 (failed)
>  old prop read: pDke.ndpeucax6V1 (failed)
>  prop read: ZsBS.GQNx7L4uPNA (failed)
>  old prop read: ZsBS.GQNx7L4uPNA (failed)
>  prop read: wl2P.nfEXJulusj6 (failed)
>  old prop read: wl2P.nfEXJulusj6 (failed)
>----- /proc/modules -----
>  subfs 9472 1 - Live 0xffffffff882e8000
>  autofs4 22664 3 - Live 0xffffffff882e1000
>  cpufreq_ondemand 8108 1 - Live 0xffffffff882de000
>  cpufreq_userspace 5828 0 - Live 0xffffffff882db000
>  cpufreq_powersave 2304 0 - Live 0xffffffff8816f000
>  ipv6 289024 14 - Live 0xffffffff88293000
>  powernow_k8 11792 1 - Live 0xffffffff8828f000
>  freq_table 5512 1 powernow_k8, Live 0xffffffff8828c000
>  button 10144 0 - Live 0xffffffff88288000
>  snd_pcm_oss 70432 0 - Live 0xffffffff88275000
>  snd_mixer_oss 22144 1 snd_pcm_oss, Live 0xffffffff8826e000
>  battery 14344 0 - Live 0xffffffff88269000
>  ac 7688 0 - Live 0xffffffff88266000
>  af_packet 25356 2 - Live 0xffffffff8825e000
>  subdomain 91804 1 - Live 0xffffffff88246000
>  usbhid 49696 0 - Live 0xffffffff88238000
>  usblp 15488 0 - Live 0xffffffff88233000
>  edd 12448 0 - Live 0xffffffff8822e000
>  floppy 73792 0 - Live 0xffffffff8821a000
>  nvidiafb 58656 0 - Live 0xffffffff8820a000
>  rivafb 58264 0 - Live 0xffffffff881fa000
>  i2c_algo_bit 10504 2 nvidiafb,rivafb, Live 0xffffffff881f6000
>  vgastate 9728 1 rivafb, Live 0xffffffff881f2000
>  via_rhine 26756 0 - Live 0xffffffff881ea000
>  mii 6784 1 via_rhine, Live 0xffffffff881e7000
>  ehci_hcd 36744 0 - Live 0xffffffff881dd000
>  i2c_ali1535 8580 0 - Live 0xffffffff881d9000
>  snd_intel8x0 39328 0 - Live 0xffffffff881cc000
>  tulip 59296 0 - Live 0xffffffff881ba000
>  snd_ac97_codec 116804 1 snd_intel8x0, Live 0xffffffff8819c000
>  i2c_ali15x3 8964 0 - Live 0xffffffff88196000
>  shpchp 101032 0 - Live 0xffffffff8817a000
>  pci_hotplug 31720 1 shpchp, Live 0xffffffff88171000
>  ohci_hcd 22916 0 - Live 0xffffffff88168000
>  usbcore 140724 5 usbhid,usblp,ehci_hcd,ohci_hcd, Live 0xffffffff88144000
>  snd_ac97_bus 3328 1 snd_ac97_codec, Live 0xffffffff88142000
>  generic 5892 0 [permanent], Live 0xffffffff8813f000
>  i2c_ali1563 8324 0 - Live 0xffffffff8813b000
>  i2c_core 25752 6 nvidiafb,rivafb,i2c_algo_bit,i2c_ali1535,i2c_ali15x3,i2c_ali1563, Live 0xffffffff88133000
>  snd_pcm 117260 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec, Live 0xffffffff88115000
>  snd_timer 29320 1 snd_pcm, Live 0xffffffff8810c000
>  snd 75808 6 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer, Live 0xffffffff880f8000
>  soundcore 11808 1 snd, Live 0xffffffff880f4000
>  snd_page_alloc 13200 2 snd_intel8x0,snd_pcm, Live 0xffffffff880ef000
>  dm_mod 65648 0 - Live 0xffffffff880dd000
>  ext3 151952 2 - Live 0xffffffff880b6000
>  jbd 72512 1 ext3, Live 0xffffffff880a3000
>  ide_cd 45984 0 - Live 0xffffffff88096000
>  cdrom 40888 1 ide_cd, Live 0xffffffff8808b000
>  ide_disk 19584 0 - Live 0xffffffff88085000
>  fan 7048 0 - Live 0xffffffff88082000
>  thermal 22284 0 - Live 0xffffffff8807b000
>  processor 36944 2 powernow_k8,thermal, Live 0xffffffff88070000
>  sata_uli 8704 3 - Live 0xffffffff8806c000
>  libata 55304 1 sata_uli, Live 0xffffffff8805d000
>  alim15x3 13212 0 [permanent], Live 0xffffffff88058000
>  ide_core 158616 4 generic,ide_cd,ide_disk,alim15x3, Live 0xffffffff88030000
>  sd_mod 20760 4 - Live 0xffffffff88029000
>  scsi_mod 161592 2 libata,sd_mod, Live 0xffffffff88000000
>----- /proc/modules end -----
>  used irqs: 0,1,8,9,14,17,25,33,41,49,57
>=========== end debug info ============
>01: None 00.0: 0102 Floppy disk controller
>  [Created at floppy.111]
>  Unique ID: rdCR.3wRL2_g4d2B
>  Hardware Class: storage
>  Model: "Floppy disk controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>02: Floppy 00.0: 10603 Floppy Disk
>  [Created at floppy.119]
>  UDI: /org/freedesktop/Hal/devices/computer_storage
>  Unique ID: sPPV.oZ89vuho4Y3
>  Parent ID: rdCR.3wRL2_g4d2B
>  Hardware Class: floppy
>  Model: "Floppy Disk"
>  Device File: /dev/fd0
>  Size: 3.5 ''
>  Size: 2880 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #1 (Floppy disk controller)
>
>03: None 00.0: 10105 BIOS
>  [Created at bios.154]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: off
>    Caps Lock: off
>  BIOS: extended read supported
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 10107 System
>  [Created at sys.56]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>05: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0802 Timer (8254)
>  [Created at misc.228]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (457502 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>12: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x1ffaffff (rw)
>  Memory Size: 512 MB
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>13: PCI 00.0: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_1689
>  Unique ID: qLht.05BmTiV0RY9
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "ALi M1689 K8 Northbridge [Super K8 Single Chip]"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x1689 "M1689 K8 Northbridge [Super K8 Single Chip]"
>  Driver: "agpgart-amd64"
>  Memory Range: 0xf8000000-0xfbffffff (rw,prefetchable)
>  Module Alias: "pci:v000010B9d00001689sv00000000sd00000000bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>14: PCI 01.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_5246
>  Unique ID: vSkL.zGxv3_xDdlC
>  SysFS ID: /devices/pci0000:00/0000:00:01.0
>  SysFS BusID: 0000:00:01.0
>  Hardware Class: bridge
>  Model: "ALi AGP8X Controller"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x5246 "AGP8X Controller"
>  Module Alias: "pci:v000010B9d00005246sv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: shpchp is active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>15: PCI 02.0: 0604 PCI bridge (Subtractive decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_5249
>  Unique ID: _Znp.Xi7km9jxxp1
>  SysFS ID: /devices/pci0000:00/0000:00:02.0
>  SysFS BusID: 0000:00:02.0
>  Hardware Class: bridge
>  Model: "ALi M5249 HTT to PCI Bridge"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x5249 "M5249 HTT to PCI Bridge"
>  Module Alias: "pci:v000010B9d00005249sv00000000sd00000000bc06sc04i01"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>16: PCI 03.0: 0601 ISA bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_1563
>  Unique ID: 3hqH.5rwKtZcxSz9
>  SysFS ID: /devices/pci0000:00/0000:00:03.0
>  SysFS BusID: 0000:00:03.0
>  Hardware Class: bridge
>  Model: "ASRock In M1563 HyperTransport South Bridge"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x1563 "M1563 HyperTransport South Bridge"
>  SubVendor: pci 0x1849 "ASRock Incorporation"
>  SubDevice: pci 0x1563 
>  Revision: 0x70
>  Driver: "ali1563_i2c"
>  Module Alias: "pci:v000010B9d00001563sv00001849sd00001563bc06sc01i00"
>  Driver Info #0:
>    Driver Status: i2c_ali1563 is active
>    Driver Activation Cmd: "modprobe i2c_ali1563"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>17: PCI 03.1: 0680 Bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_7101
>  Unique ID: w+J7.egvSauENMU7
>  SysFS ID: /devices/pci0000:00/0000:00:03.1
>  SysFS BusID: 0000:00:03.1
>  Hardware Class: bridge
>  Model: "ASRock In M7101 Power Management Controller [PMU]"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x7101 "M7101 Power Management Controller [PMU]"
>  SubVendor: pci 0x1849 "ASRock Incorporation"
>  SubDevice: pci 0x7101 
>  Module Alias: "pci:v000010B9d00007101sv00001849sd00007101bc06sc80i00"
>  Driver Info #0:
>    Driver Status: i2c_ali15x3 is active
>    Driver Activation Cmd: "modprobe i2c_ali15x3"
>  Driver Info #1:
>    Driver Status: i2c_ali1535 is active
>    Driver Activation Cmd: "modprobe i2c_ali1535"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>18: PCI 04.0: 0401 Multimedia audio controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_5455
>  Unique ID: 8otl.qAIzqAgBao4
>  SysFS ID: /devices/pci0000:00/0000:00:04.0
>  SysFS BusID: 0000:00:04.0
>  Hardware Class: sound
>  Model: "ASRock In M5455 PCI AC-Link Controller Audio Device"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x5455 "M5455 PCI AC-Link Controller Audio Device"
>  SubVendor: pci 0x1849 "ASRock Incorporation"
>  SubDevice: pci 0x0850 
>  Revision: 0x20
>  Driver: "Intel ICH"
>  I/O Ports: 0xe800-0xe8ff (rw)
>  Memory Range: 0xfebff000-0xfebfffff (rw,non-prefetchable)
>  IRQ: 209 (27098 events)
>  Module Alias: "pci:v000010B9d00005455sv00001849sd00000850bc04sc01i00"
>  Driver Info #0:
>    Driver Status: snd_intel8x0 is active
>    Driver Activation Cmd: "modprobe snd_intel8x0"
>  Driver Info #1:
>    Driver Status: ali5455 is not active
>    Driver Activation Cmd: "modprobe ali5455"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>
>19: PCI 0d.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_5263
>  Unique ID: mY_N.wnomy9rZnZ9
>  SysFS ID: /devices/pci0000:00/0000:00:0d.0
>  SysFS BusID: 0000:00:0d.0
>  Hardware Class: network
>  Model: "ASRock In M5263 Ethernet Controller"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x5263 "M5263 Ethernet Controller"
>  SubVendor: pci 0x1849 "ASRock Incorporation"
>  SubDevice: pci 0x5263 
>  Revision: 0x40
>  Driver: "tulip"
>  Device File: eth2
>  I/O Ports: 0xe400-0xe4ff (rw)
>  Memory Range: 0xfebfec00-0xfebfecff (rw,non-prefetchable)
>  IRQ: 193 (no events)
>  HW Address: 00:0b:6a:7b:ad:7b
>  Module Alias: "pci:v000010B9d00005263sv00001849sd00005263bc02sc00i00"
>  Driver Info #0:
>    Driver Status: tulip is active
>    Driver Activation Cmd: "modprobe tulip"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>20: PCI 0e.0: 0101 IDE interface
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_5229
>  Unique ID: vuMS.luyn6jFx3jC
>  SysFS ID: /devices/pci0000:00/0000:00:0e.0
>  SysFS BusID: 0000:00:0e.0
>  Hardware Class: storage
>  Model: "ALi M5229 IDE"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x5229 "M5229 IDE"
>  SubVendor: pci 0x10b9 "ALi Corporation"
>  SubDevice: pci 0x5229 
>  Revision: 0xc7
>  Driver: "ALI15x3_IDE"
>  I/O Ports: 0xff00-0xff0f (rw)
>  IRQ: 169 (9689 events)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  IRQ: 14 (16287 events)
>  Module Alias: "pci:v000010B9d00005229sv000010B9sd00005229bc01sc01ifa"
>  Driver Info #0:
>    Driver Status: alim15x3 is active
>    Driver Activation Cmd: "modprobe alim15x3"
>  Driver Info #1:
>    Driver Status: generic is active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>21: PCI 0e.1: 0180 Unknown mass storage controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_5289
>  Unique ID: mDsH.a+poeoZUR54
>  SysFS ID: /devices/pci0000:00/0000:00:0e.1
>  SysFS BusID: 0000:00:0e.1
>  Hardware Class: storage
>  Model: "ASRock In Unknown mass storage controller"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x5289 
>  SubVendor: pci 0x1849 "ASRock Incorporation"
>  SubDevice: pci 0x5289 
>  Revision: 0x10
>  Driver: "sata_uli"
>  I/O Ports: 0xf80-0xf87 (rw)
>  I/O Ports: 0xf00-0xf03 (rw)
>  I/O Ports: 0xe80-0xe87 (rw)
>  I/O Ports: 0xe00-0xe03 (rw)
>  I/O Ports: 0xd880-0xd88f (rw)
>  IRQ: 169 (9689 events)
>  Module Alias: "pci:v000010B9d00005289sv00001849sd00005289bc01sc80i8f"
>  Driver Info #0:
>    Driver Status: sata_uli is active
>    Driver Activation Cmd: "modprobe sata_uli"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>22: PCI 0f.0: 0c03 USB Controller (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_5237_1
>  Unique ID: _+Pw.2qM5X9cC8j9
>  SysFS ID: /devices/pci0000:00/0000:00:0f.0
>  SysFS BusID: 0000:00:0f.0
>  Hardware Class: usb controller
>  Model: "ASRock In USB 1.1 Controller"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x5237 "USB 1.1 Controller"
>  SubVendor: pci 0x1849 "ASRock Incorporation"
>  SubDevice: pci 0x5237 
>  Revision: 0x03
>  Driver: "ohci_hcd"
>  Memory Range: 0xfebfd000-0xfebfdfff (rw,non-prefetchable)
>  IRQ: 177 (160 events)
>  Module Alias: "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10"
>  Driver Info #0:
>    Driver Status: ohci-hcd is active
>    Driver Activation Cmd: "modprobe ohci-hcd"
>  Driver Info #1:
>    Driver Status: ohci_hcd is active
>    Driver Activation Cmd: "modprobe ohci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>23: PCI 0f.1: 0c03 USB Controller (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_5237_0
>  Unique ID: rKvl.2qM5X9cC8j9
>  SysFS ID: /devices/pci0000:00/0000:00:0f.1
>  SysFS BusID: 0000:00:0f.1
>  Hardware Class: usb controller
>  Model: "ASRock In USB 1.1 Controller"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x5237 "USB 1.1 Controller"
>  SubVendor: pci 0x1849 "ASRock Incorporation"
>  SubDevice: pci 0x5237 
>  Revision: 0x03
>  Driver: "ohci_hcd"
>  Memory Range: 0xfebfc000-0xfebfcfff (rw,non-prefetchable)
>  IRQ: 185 (26 events)
>  Module Alias: "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10"
>  Driver Info #0:
>    Driver Status: ohci-hcd is active
>    Driver Activation Cmd: "modprobe ohci-hcd"
>  Driver Info #1:
>    Driver Status: ohci_hcd is active
>    Driver Activation Cmd: "modprobe ohci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>24: PCI 0f.2: 0c03 USB Controller (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_5237
>  Unique ID: ifOb.2qM5X9cC8j9
>  SysFS ID: /devices/pci0000:00/0000:00:0f.2
>  SysFS BusID: 0000:00:0f.2
>  Hardware Class: usb controller
>  Model: "ASRock In USB 1.1 Controller"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x5237 "USB 1.1 Controller"
>  SubVendor: pci 0x1849 "ASRock Incorporation"
>  SubDevice: pci 0x5237 
>  Revision: 0x03
>  Driver: "ohci_hcd"
>  Memory Range: 0xfebfb000-0xfebfbfff (rw,non-prefetchable)
>  IRQ: 201 (no events)
>  Module Alias: "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10"
>  Driver Info #0:
>    Driver Status: ohci-hcd is active
>    Driver Activation Cmd: "modprobe ohci-hcd"
>  Driver Info #1:
>    Driver Status: ohci_hcd is active
>    Driver Activation Cmd: "modprobe ohci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>25: PCI 0f.3: 0c03 USB Controller (EHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10b9_5239
>  Unique ID: a_tQ.KFUNkdo9MlF
>  SysFS ID: /devices/pci0000:00/0000:00:0f.3
>  SysFS BusID: 0000:00:0f.3
>  Hardware Class: usb controller
>  Model: "ASRock In USB 2.0 Controller"
>  Vendor: pci 0x10b9 "ALi Corporation"
>  Device: pci 0x5239 "USB 2.0 Controller"
>  SubVendor: pci 0x1849 "ASRock Incorporation"
>  SubDevice: pci 0x5239 
>  Revision: 0x01
>  Driver: "ehci_hcd"
>  Memory Range: 0xfebfe800-0xfebfe8ff (rw,non-prefetchable)
>  IRQ: 217 (4 events)
>  Module Alias: "pci:v000010B9d00005239sv00001849sd00005239bc0Csc03i20"
>  Driver Info #0:
>    Driver Status: ehci-hcd is active
>    Driver Activation Cmd: "modprobe ehci-hcd"
>  Driver Info #1:
>    Driver Status: ehci_hcd is active
>    Driver Activation Cmd: "modprobe ehci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>26: PCI 18.0: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1022_1100
>  Unique ID: fiDB.ptk_g9XAN03
>  SysFS ID: /devices/pci0000:00/0000:00:18.0
>  SysFS BusID: 0000:00:18.0
>  Hardware Class: bridge
>  Model: "AMD K8 [Athlon64/Opteron] HyperTransport Technology Configuration"
>  Vendor: pci 0x1022 "AMD"
>  Device: pci 0x1100 "K8 [Athlon64/Opteron] HyperTransport Technology Configuration"
>  Module Alias: "pci:v00001022d00001100sv00000000sd00000000bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>27: PCI 18.1: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1022_1101
>  Unique ID: W1j0.KIhk9ketuO3
>  SysFS ID: /devices/pci0000:00/0000:00:18.1
>  SysFS BusID: 0000:00:18.1
>  Hardware Class: bridge
>  Model: "AMD K8 [Athlon64/Opteron] Address Map"
>  Vendor: pci 0x1022 "AMD"
>  Device: pci 0x1101 "K8 [Athlon64/Opteron] Address Map"
>  Module Alias: "pci:v00001022d00001101sv00000000sd00000000bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>28: PCI 18.2: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1022_1102
>  Unique ID: OMCs.ridUeImaQn3
>  SysFS ID: /devices/pci0000:00/0000:00:18.2
>  SysFS BusID: 0000:00:18.2
>  Hardware Class: bridge
>  Model: "AMD K8 [Athlon64/Opteron] DRAM Controller"
>  Vendor: pci 0x1022 "AMD"
>  Device: pci 0x1102 "K8 [Athlon64/Opteron] DRAM Controller"
>  Module Alias: "pci:v00001022d00001102sv00000000sd00000000bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>29: PCI 18.3: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1022_1103
>  Unique ID: Fhhh.M7aE7ttHy94
>  SysFS ID: /devices/pci0000:00/0000:00:18.3
>  SysFS BusID: 0000:00:18.3
>  Hardware Class: bridge
>  Model: "AMD K8 [Athlon64/Opteron] Miscellaneous Control"
>  Vendor: pci 0x1022 "AMD"
>  Device: pci 0x1103 "K8 [Athlon64/Opteron] Miscellaneous Control"
>  Module Alias: "pci:v00001022d00001103sv00000000sd00000000bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>30: PCI 100.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_2d
>  Unique ID: VCu0.TAAB5++Hj50
>  Parent ID: vSkL.zGxv3_xDdlC
>  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>  SysFS BusID: 0000:01:00.0
>  Hardware Class: graphics card
>  Model: "Micro-Star International MSI-8808"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x002d "RIVA TNT2 Model 64/Model 64 Pro"
>  SubVendor: pci 0x1462 "Micro-Star International Co., Ltd."
>  SubDevice: pci 0x8808 "MSI-8808"
>  Revision: 0x15
>  Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable)
>  Memory Range: 0xf2000000-0xf3ffffff (rw,prefetchable)
>  Memory Range: 0xf0800000-0xf080ffff (ro,prefetchable,disabled)
>  IRQ: 225 (no events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Module Alias: "pci:v000010DEd0000002Dsv00001462sd00008808bc03sc00i00"
>  Driver Info #0:
>    XFree86 v4 Server Module: nv
>  Config Status: cfg=yes, avail=yes, need=yes, active=unknown
>  Attached to: #14 (PCI bridge)
>
>31: PCI 206.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3043
>  Unique ID: rBUF.HxM3GxcLfNA
>  Parent ID: _Znp.Xi7km9jxxp1
>  SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:02:06.0
>  SysFS BusID: 0000:02:06.0
>  Hardware Class: network
>  Model: "D-Link DFE-530TX rev A"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3043 "VT86C100A [Rhine]"
>  SubVendor: pci 0x1186 "D-Link System Inc"
>  SubDevice: pci 0x1400 "DFE-530TX rev A"
>  Revision: 0x06
>  Driver: "via-rhine"
>  Device File: eth0
>  I/O Ports: 0xcc00-0xcc7f (rw)
>  Memory Range: 0xfeaffc00-0xfeaffc7f (rw,non-prefetchable)
>  Memory Range: 0x20000000-0x2000ffff (ro,prefetchable,disabled)
>  IRQ: 209 (27098 events)
>  HW Address: 00:50:ba:c3:b5:1b
>  Module Alias: "pci:v00001106d00003043sv00001186sd00001400bc02sc00i00"
>  Driver Info #0:
>    Driver Status: via-rhine is active
>    Driver Activation Cmd: "modprobe via-rhine"
>  Driver Info #1:
>    Driver Status: via_rhine is active
>    Driver Activation Cmd: "modprobe via_rhine"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #15 (PCI bridge)
>
>32: None 00.0: 0700 Serial controller
>  [Created at misc.458]
>  Unique ID: rdCR.7RG8lK_UzJ9
>  Hardware Class: unknown
>  Model: "Serial controller"
>  I/O Ports: 0x3f8-0x3ff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>33: IDE 01.0: 10602 CD-ROM (DVD)
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_model_LITE_ON_DVD_SOHD_167T
>  Unique ID: iqvy.totDbSE5y2D
>  Parent ID: vuMS.luyn6jFx3jC
>  SysFS ID: /block/hdb
>  SysFS BusID: 0.1
>  SysFS Device Link: /devices/pci0000:00/0000:00:0e.0/ide0/0.1
>  Hardware Class: cdrom
>  Model: "LITE-ON DVD SOHD-167T"
>  Vendor: "LITE-ON"
>  Device: "DVD SOHD-167T"
>  Driver: "ALI15x3_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/dvd
>  Device Files: /dev/hdb, /dev/dvd, /dev/cdrom, /dev/disk/by-path/pci-0000:00:0e.0-ide-0:1
>  Device Number: block 3:64
>  Features: DVD
>  Size: 0 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #20 (IDE interface)
>  Drive Speed: 48
>
>34: IDE 00.0: 10600 Disk
>  [Created at block.188]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD
>  Unique ID: mE25.KXeGb94kPSE
>  Parent ID: mDsH.a+poeoZUR54
>  SysFS ID: /block/sda
>  SysFS BusID: 0:0:0:0
>  SysFS Device Link: /devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0
>  Hardware Class: disk
>  Model: "HDS722580VLSA80"
>  Device: "HDS722580VLSA80"
>  Revision: "V32O"
>  Driver: "sata_uli", "sd"
>  Device File: /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD
>  Device Files: /dev/sda, /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD, /dev/disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0
>  Device Number: block 8:0-8:15
>  BIOS id: 0x80
>  Geometry (BIOS EDD): CHS 10011/255/63
>  Size (BIOS EDD): 160836478 sectors
>  Geometry (BIOS Legacy): CHS 1024/255/63
>  Drive status: no medium
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #21 (Unknown mass storage controller)
>
>35: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_part1_size_1077479424
>  Unique ID: 1tKY.SE1wIdpsiiC
>  Parent ID: mE25.KXeGb94kPSE
>  SysFS ID: /block/sda/sda1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part1
>  Device Files: /dev/sda1, /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part1, /dev/disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part1
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #34 (Disk)
>
>36: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_d2dbbcfd_5339_4e44_8ab2_04f5a0aae7d0
>  Unique ID: U2bc.SE1wIdpsiiC
>  Parent ID: mE25.KXeGb94kPSE
>  SysFS ID: /block/sda/sda2
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part2
>  Device Files: /dev/sda2, /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part2, /dev/disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part2, /dev/disk/by-uuid/d2dbbcfd-5339-4e44-8ab2-04f5a0aae7d0
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #34 (Disk)
>
>37: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_4e557ca8_6263_4b1f_96fb_73bb416727c0
>  Unique ID: xDrg.SE1wIdpsiiC
>  Parent ID: mE25.KXeGb94kPSE
>  SysFS ID: /block/sda/sda3
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part3
>  Device Files: /dev/sda3, /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part3, /dev/disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part3, /dev/disk/by-uuid/4e557ca8-6263-4b1f-96fb-73bb416727c0
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #34 (Disk)
>
>38: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0_if0
>  Unique ID: k4bc.HMkiLJ+kI61
>  Parent ID: _+Pw.2qM5X9cC8j9
>  SysFS ID: /devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-rc6-git13-4-default ohci_hcd OHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-rc6-git13-4-default ohci_hcd"
>  Device: "OHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:0f.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #22 (USB Controller)
>
>39: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_451_1446_noserial_if0
>  Unique ID: ADDn.8T3QcmdDop7
>  Parent ID: k4bc.HMkiLJ+kI61
>  SysFS ID: /devices/pci0000:00/0000:00:0f.0/usb1/1-1/1-1:1.0
>  SysFS BusID: 1-1:1.0
>  Hardware Class: hub
>  Model: "Texas Instruments TUSB2040/2070 Hub"
>  Hotplug: USB
>  Vendor: usb 0x0451 "Texas Instruments"
>  Device: usb 0x1446 "TUSB2040/2070 Hub"
>  Revision: "1.10"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0451p1446d0110dc09dsc00dp00ic*isc*ip*"
>  Driver Info #0:
>    Driver Status: usbcore is active
>    Driver Activation Cmd: "modprobe usbcore"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #38 (Hub)
>
>40: USB 00.0: 10900 Printer
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0_printer_noserial
>  Unique ID: cLrx.Li3mAdnD6n6
>  Parent ID: k4bc.HMkiLJ+kI61
>  SysFS ID: /devices/pci0000:00/0000:00:0f.0/usb1/1-2/1-2:1.0
>  SysFS BusID: 1-2:1.0
>  Hardware Class: printer
>  Model: "Epson Stylus Printer"
>  Hotplug: USB
>  Vendor: usb 0x04b8 "Epson"
>  Device: usb 0x0005 "Stylus Printer"
>  Revision: "1.00"
>  Serial ID: "L84NO0009270827130"
>  Driver: "usblp"
>  Device File: /dev/usb/lp0
>  Device Number: char 180:0
>  Speed: 12 Mbps
>  Module Alias: "usb:v04B8p0005d0100dc00dsc00dp00ic07isc01ip02"
>  Driver Info #0:
>    Driver Status: usblp is active
>    Driver Activation Cmd: "modprobe usblp"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>  Attached to: #38 (Hub)
>
>41: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1_if0
>  Unique ID: pBe4.25pHj3oSFO8
>  Parent ID: rKvl.2qM5X9cC8j9
>  SysFS ID: /devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-rc6-git13-4-default ohci_hcd OHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-rc6-git13-4-default ohci_hcd"
>  Device: "OHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:0f.1"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #23 (USB Controller)
>
>42: USB 00.0: 10503 USB Mouse
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0_logicaldev_input
>  Unique ID: FKGF._2amPdZDfg9
>  Parent ID: pBe4.25pHj3oSFO8
>  SysFS ID: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0
>  SysFS BusID: 2-1:1.0
>  Hardware Class: mouse
>  Model: "USB Mouse"
>  Hotplug: USB
>  Vendor: usb 0x1241 
>  Device: usb 0x1111 
>  Revision: "1.00"
>  Compatible to: int 0x0210 0x0010
>  Driver: "usbhid"
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2
>  Device Number: char 13:63 (char 13:32)
>  Speed: 1.5 Mbps
>  Module Alias: "usb:v1241p1111d0100dc00dsc00dp00ic03isc01ip02"
>  Driver Info #0:
>    Buttons: 0
>    Wheels: 1
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #41 (Hub)
>
>43: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2_if0
>  Unique ID: uIhY.ppts4qaACgF
>  Parent ID: ifOb.2qM5X9cC8j9
>  SysFS ID: /devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0
>  SysFS BusID: 3-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-rc6-git13-4-default ohci_hcd OHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-rc6-git13-4-default ohci_hcd"
>  Device: "OHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:0f.2"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #24 (USB Controller)
>
>44: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3_if0
>  Unique ID: zPk0.msyeOxdEuV1
>  Parent ID: a_tQ.KFUNkdo9MlF
>  SysFS ID: /devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0
>  SysFS BusID: 4-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-rc6-git13-4-default ehci_hcd EHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-rc6-git13-4-default ehci_hcd"
>  Device: "EHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:0f.3"
>  Driver: "hub"
>  Speed: 480 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #25 (USB Controller)
>
>45: PS/2 00.0: 10800 Keyboard
>  [Created at input.135]
>  UDI: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input
>  Unique ID: EXC1.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "AT Translated Set 2 keyboard"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "AT Translated Set 2 keyboard"
>  Device File: /dev/input/event1
>  Device Number: char 13:65
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>46: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: X86-64
>  Vendor: "AuthenticAMD"
>  Model: 15.15.0 "AMD Athlon(tm) 64 Processor 3500+"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,syscall,nx,mmxext,lm,3dnowext,3dnow
>  Clock: 1000 MHz
>  Cache: 512 kb
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>47: None 00.0: 10701 Ethernet
>  [Created at net.111]
>  UDI: /org/freedesktop/Hal/devices/net_00_50_ba_c3_b5_1b
>  Unique ID: usDW.ndpeucax6V1
>  Parent ID: rBUF.HxM3GxcLfNA
>  SysFS ID: /class/net/eth0
>  SysFS Device Link: /devices/pci0000:00/0000:00:02.0/0000:02:06.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Device File: eth0
>  HW Address: 00:50:ba:c3:b5:1b
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #31 (Ethernet controller)
>
>48: None 02.0: 10701 Ethernet
>  [Created at net.111]
>  UDI: /org/freedesktop/Hal/devices/net_00_0b_6a_7b_ad_7b
>  Unique ID: pDke.ndpeucax6V1
>  Parent ID: mY_N.wnomy9rZnZ9
>  SysFS ID: /class/net/eth2
>  SysFS Device Link: /devices/pci0000:00/0000:00:0d.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Device File: eth2
>  HW Address: 00:0b:6a:7b:ad:7b
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #19 (Ethernet controller)
>
>49: None 00.0: 10700 Loopback
>  [Created at net.111]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>50: None 00.0: 10781 Network Interface
>  [Created at net.111]
>  Unique ID: wl2P.nfEXJulusj6
>  SysFS ID: /class/net/sit0
>  Hardware Class: network interface
>  Model: "Network Interface"
>  Device File: sit0
>  Config Status: cfg=new, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 112983: 47558