Attachment 47849 Details for Bug 113323

dmesg info

dmesg.txt (text/plain), 23.93 KB, created by Chip Daiger on 2005-08-27 00:26:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chip Daiger

Created: 2005-08-27 00:26:06 UTC

Size: 23.93 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/hda1 vga=0x317 selinux=0    resume=/dev/hdb1  splash=silent)
>Linux version 2.6.13-rc6-git13-4-default (geeko@buildhost) (gcc version 4.0.2 20050818 (prerelease) (SUSE Linux)) #1 Mon Aug 22 18:38:22 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005fef0000 (usable)
> BIOS-e820: 000000005fef0000 - 000000005fef3000 (ACPI NVS)
> BIOS-e820: 000000005fef3000 - 000000005ff00000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 RS480                                 ) @ 0x00000000000f7c50
>ACPI: RSDT (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000005fef3040
>ACPI: FADT (v002 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000005fef30c0
>ACPI: MCFG (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000005fef6b00
>ACPI: MADT (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000005fef6a40
>ACPI: DSDT (v001 RS480  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
>On node 0 totalpages: 392944
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 388848 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 5ff00000 (gap: 5ff00000:80100000)
>Checking aperture...
>CPU 0: aperture @ fffe000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Built 1 zonelists
>Kernel command line: root=/dev/hda1 vga=0x317 selinux=0    resume=/dev/hdb1  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 1989.851 MHz processor.
>time.c: Using PIT/TSC based timekeeping.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Memory: 1539360k/1571776k available (2364k kernel code, 31432k reserved, 1231k data, 176k init)
>Calibrating delay using timer specific routine.. 3987.49 BogoMIPS (lpj=7974995)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>mtrr: v2.0 (20020519)
>CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
>checking if image is initramfs... it is
>ACPI: Looking for DSDT in initrd... not found!
> not found!
> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
>Parsing all Control Methods:........................................................................................................................
>Table [DSDT](id F004) - 441 Objects with 44 Devices 120 Methods 18 Regions
>ACPI Namespace successfully loaded at root ffffffff804f5580
>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>Detected 12.436 MHz APIC timer.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1024 [06] ev_create_gpe_block   : Found 4 Wake, Enabled 1 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:..............  psargs-0362: *** Error: Looking up [\_SB_.PCI0.LPC0.LNK0] in namespace, AE_NOT_FOUND
>search_node ffff81005fd9bcb0 start_node ffff81005fd9bcb0 return_node 0000000000000000
>
>  nsinit-0316 [06] ns_init_one_object    : Could not execute arguments for [PICM] (Package), AE_NOT_FOUND
>....................................
>Initialized 18/18 Regions 0/0 Fields 15/15 Buffers 17/22 Packages (450 nodes)
>Executing all Device _STA and_INI methods:...............................................
>47 Devices found containing: 47 _STA, 1 _INI methods
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11), disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 3 of device 0000:00:00.0
>PCI: Bridge: 0000:00:14.4
>  IO window: e000-efff
>  MEM window: fb000000-fcffffff
>  PREFETCH window: d8000000-dfffffff
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1125087030.816:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20000080000, using 6144k, total 131072k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 72942 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>PCI0 USB0 USB1 USB2 AUDO  P2P  MAC 
>ACPI: (supports S0 S1 S3 S4bios S5)
>Freeing unused kernel memory: 176k freed
>udev[838]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>SCSI subsystem initialized
>udev[842]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[845]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[848]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[852]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>libata version 1.11 loaded.
>udev[857]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[860]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>sata_sil version 0.9
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 177
>ata1: SATA max UDMA/100 cmd 0xFFFFC20000004080 ctl 0xFFFFC2000000408A bmdma 0xFFFFC20000004000 irq 177
>Losing some ticks... checking if CPU frequency changed.
>ata2: SATA max UDMA/100 cmd 0xFFFFC200000040C0 ctl 0xFFFFC200000040CA bmdma 0xFFFFC20000004008 irq 177
>ata1: no device found (phy stat 00000000)
>scsi0 : sata_sil
>udev[865]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata2: no device found (phy stat 00000000)
>scsi1 : sata_sil
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 185
>ata3: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0xFFFFC20000006000 irq 185
>ata4: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0xFFFFC20000006008 irq 185
>udev[870]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata3: no device found (phy stat 00000000)
>scsi2 : sata_sil
>udev[873]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata4: no device found (phy stat 00000000)
>scsi3 : sata_sil
>udev[880]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[881]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>udev[885]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[888]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf300-0xf307, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xf308-0xf30f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD1600BB-22GUA0, ATA DISK drive
>hdb: ST3300831A, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>udev[893]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[894]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>hdc: LITE-ON DVDRW SOHW-1633S, ATAPI CD/DVD-ROM drive
>hdd: LITE-ON CD-ROM LTN-489S, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>udev[900]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[903]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[904]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ACPI: CPU0 (power states: C1[C1])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>udev[908]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[912]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[916]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[919]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>hda: max request size: 1024KiB
>hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
>hda: cache flushes supported
>udev[920]: import_file_into_env: can't open '/sbin/path_id /block/hda'
> hda: hda1 hda2
>hdb: max request size: 1024KiB
>hdb: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100)
>hdb: cache flushes supported
>udev[930]: import_file_into_env: can't open '/sbin/path_id /block/hdb'
> hdb: hdb1 hdb2
>udev[943]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[947]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[950]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>udev[953]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[954]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>hdd: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
>udev[955]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[956]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[957]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[960]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[962]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[963]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>udev[971]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[975]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052216k swap on /dev/hdb1.  Priority:-1 extents:1
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 201, io mem 0xfe02d000
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 201, io mem 0xfe02c000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 201, io mem 0xfe02b000
>ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 209
>nvidiafb: module not supported by Novell, setting U taint flag.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 217
>PCI: Unable to reserve mem region #2:8000000@d8000000 for device 0000:01:00.0
>nvidiafb: cannot request PCI regions
>ACPI: PCI interrupt for device 0000:01:00.0 disabled
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 20 (level, low) -> IRQ 217
>ieee1394: Initialized config rom entry `ip1394'
>eth0: RealTek RTL8139 at 0xffffc20000022000, 00:11:09:02:f0:1a, IRQ 217
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 21 (level, low) -> IRQ 169
>PCI: Via IRQ fixup for 0000:01:04.0, from 3 to 9
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169]  MMIO=[fcffe000-fcffe7ff]  Max Packet=[2048]
>usb 2-2: new full speed USB device using ohci_hcd and address 2
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>usb 1-4: new full speed USB device using ohci_hcd and address 2
>usb 2-2.1: new low speed USB device using ohci_hcd and address 3
>Floppy drive(s): fd0 is 1.44M
>usb 2-2.2: new full speed USB device using ohci_hcd and address 4
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc0000956c1e]
>hub 2-2.2:1.0: USB hub found
>hub 2-2.2:1.0: 4 ports detected
>usb 2-2.2.1: new low speed USB device using ohci_hcd and address 5
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new driver hiddev
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.00 Keyboard [Belkin Components Belkin OmniView KVM Switch] on usb-0000:00:13.1-2.1
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.00 Mouse [Belkin Components Belkin OmniView KVM Switch] on usb-0000:00:13.1-2.1
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:13.1-2.2.1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>floppy0: no floppy controllers found
>  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sda at scsi4, channel 0, id 0, lun 0
>  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdb at scsi4, channel 0, id 0, lun 1
>  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdc at scsi4, channel 0, id 0, lun 2
>  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdd at scsi4, channel 0, id 0, lun 3
>usb-storage: device scan complete
>bootsplash: status on console 0 changed to on
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 not a capable Intel processor
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff80446b40(lo)
>IPv6 over IPv4 tunneling driver
>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
>cpu_init done, current fid 0xc, vid 0x6
>bootsplash: status on console 0 changed to on
>bootsplash: status on console 0 changed to on
>subfs 0.9
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>eth0: no IPv6 routers present
>usb 2-2.2: USB disconnect, address 4
>usb 2-2.2.1: USB disconnect, address 5
>input.c: calling hotplug without a hotplug agent defined
>usb 2-2.2: new full speed USB device using ohci_hcd and address 6
>hub 2-2.2:1.0: USB hub found
>hub 2-2.2:1.0: 4 ports detected
>usb 2-2.2.1: new low speed USB device using ohci_hcd and address 7
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:13.1-2.2.1
>usb 2-2.2: USB disconnect, address 6
>usb 2-2.2.1: USB disconnect, address 7
>input.c: calling hotplug without a hotplug agent defined
>usb 2-2.2: new full speed USB device using ohci_hcd and address 8
>hub 2-2.2:1.0: USB hub found
>hub 2-2.2:1.0: 4 ports detected
>usb 2-2.2.1: new low speed USB device using ohci_hcd and address 9
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:13.1-2.2.1
>usb 2-2.2: USB disconnect, address 8
>usb 2-2.2.1: USB disconnect, address 9
>input.c: calling hotplug without a hotplug agent defined
>usb 2-2.2: new full speed USB device using ohci_hcd and address 10
>hub 2-2.2:1.0: USB hub found
>hub 2-2.2:1.0: 4 ports detected
>usb 2-2.2.1: new low speed USB device using ohci_hcd and address 11
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:13.1-2.2.1
>usb 2-2.2: USB disconnect, address 10
>usb 2-2.2.1: USB disconnect, address 11
>input.c: calling hotplug without a hotplug agent defined
>usb 2-2.2: new full speed USB device using ohci_hcd and address 12
>hub 2-2.2:1.0: USB hub found
>hub 2-2.2:1.0: 4 ports detected
>usb 2-2.2.1: new low speed USB device using ohci_hcd and address 13
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:13.1-2.2.1
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>lp: driver loaded but no devices found
>lp: driver loaded but no devices found
>st: Version 20050501, fixed bufsize 32768, s/g segs 256
>Attached scsi generic sg0 at scsi4, channel 0, id 0, lun 0,  type 0
>Attached scsi generic sg1 at scsi4, channel 0, id 0, lun 1,  type 0
>Attached scsi generic sg2 at scsi4, channel 0, id 0, lun 2,  type 0
>Attached scsi generic sg3 at scsi4, channel 0, id 0, lun 3,  type 0
>NET: Registered protocol family 17
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>lp: driver loaded but no devices found
>lp: driver loaded but no devices found
>usb 2-2.2: USB disconnect, address 12
>usb 2-2.2.1: USB disconnect, address 13
>input.c: calling hotplug without a hotplug agent defined
>usb 2-2.2: new full speed USB device using ohci_hcd and address 14
>hub 2-2.2:1.0: USB hub found
>hub 2-2.2:1.0: 4 ports detected
>usb 2-2.2.1: new low speed USB device using ohci_hcd and address 15
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:13.1-2.2.1
>usb 2-2.2: USB disconnect, address 14
>usb 2-2.2.1: USB disconnect, address 15
>input.c: calling hotplug without a hotplug agent defined
>usb 2-2.2: new full speed USB device using ohci_hcd and address 16
>hub 2-2.2:1.0: USB hub found
>hub 2-2.2:1.0: 4 ports detected
>usb 2-2.2.1: new low speed USB device using ohci_hcd and address 17
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:13.1-2.2.1
>usb 2-2.2: USB disconnect, address 16
>usb 2-2.2.1: USB disconnect, address 17
>input.c: calling hotplug without a hotplug agent defined
>usb 2-2.2: new full speed USB device using ohci_hcd and address 18
>hub 2-2.2:1.0: USB hub found
>hub 2-2.2:1.0: 4 ports detected
>usb 2-2.2.1: new low speed USB device using ohci_hcd and address 19
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:13.1-2.2.1
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>usb 2-2.2: USB disconnect, address 18
>usb 2-2.2.1: USB disconnect, address 19
>input.c: calling hotplug without a hotplug agent defined
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>usb 2-2.2: new full speed USB device using ohci_hcd and address 20
>hub 2-2.2:1.0: USB hub found
>hub 2-2.2:1.0: 4 ports detected
>usb 2-2.2.1: new low speed USB device using ohci_hcd and address 21
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:13.1-2.2.1
>usb 2-2.2: USB disconnect, address 20
>usb 2-2.2.1: USB disconnect, address 21
>input.c: calling hotplug without a hotplug agent defined
>usb 2-2.2: new full speed USB device using ohci_hcd and address 22
>hub 2-2.2:1.0: USB hub found
>hub 2-2.2:1.0: 4 ports detected
>usb 2-2.2.1: new low speed USB device using ohci_hcd and address 23
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:13.1-2.2.1

Actions: View

Attachments on bug 113323: 47848 | 47849 | 48071 | 48238 | 48390 | 48392 | 48515