Attachment 47929 Details for Bug 106147

/var/log/boot.msg (beta3) with segfault for init and hotplug

boot.msg (text/plain), 29.11 KB, created by Ulrich Windl on 2005-08-29 08:32:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ulrich Windl

Created: 2005-08-29 08:32:07 UTC

Size: 29.11 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.13-rc6-git13-4-smp
>Loaded 23539 symbols from /boot/System.map-2.6.13-rc6-git13-4-smp.
>Symbols match kernel version 2.6.13.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><4>Bootdata ok (command line is auto BOOT_IMAGE=Linux ro root=900 selinux=0 splash=silent showopts)
><5>Linux version 2.6.13-rc6-git13-4-smp (geeko@buildhost) (gcc version 4.0.2 20050818 (prerelease) (SUSE Linux)) #1 SMP Mon Aug 22 18:38:22 UTC 2005
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
><4> BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
><4> BIOS-e820: 000000003ffc0000 - 000000003ffcfc00 (ACPI data)
><4> BIOS-e820: 000000003ffcfc00 - 000000003ffff000 (reserved)
><4> BIOS-e820: 00000000e0000000 - 00000000fec90000 (reserved)
><4> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
><4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
><7>ACPI: RSDP (v000 DELL                                  ) @ 0x00000000000fd650
><7>ACPI: RSDT (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd664
><7>ACPI: FADT (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd6b0
><7>ACPI: MADT (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd724
><7>ACPI: SPCR (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7c0
><7>ACPI: HPET (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd810
><7>ACPI: MCFG (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd848
><7>ACPI: DSDT (v001 DELL   PESC1425 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000003ffc0000
><4>Bootmem setup node 0 0000000000000000-000000003ffc0000
><7>On node 0 totalpages: 262080
><7>  DMA zone: 4096 pages, LIFO batch:1
><7>  Normal zone: 257984 pages, LIFO batch:31
><7>  HighMem zone: 0 pages, LIFO batch:1
><6>ACPI: PM-Timer IO Port: 0x808
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><6>Processor #0 15:4 APIC version 16
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
><6>Processor #6 15:4 APIC version 16
><6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
><6>Processor #1 15:4 APIC version 16
><6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
><6>Processor #7 15:4 APIC version 16
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
><6>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[32])
><6>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 32-55
><6>ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[64])
><6>IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 64-87
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Setting APIC routing to flat
><6>ACPI: HPET id: 0xffffffff base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><6>Allocating PCI resources starting at 40000000 (gap: 3ffff000:a0001000)
><4>Checking aperture...
><4>Built 1 zonelists
><5>Kernel command line: auto BOOT_IMAGE=Linux ro root=900 selinux=0 splash=silent showopts
><6>bootsplash: silent mode.
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 131072 bytes)
><6>time.c: Using 14.318180 MHz HPET timer.
><6>time.c: Detected 2800.182 MHz processor.
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Memory: 1018932k/1048320k available (2506k kernel code, 0k reserved, 1361k data, 212k init)
><4>Calibrating delay using timer specific routine.. 5605.23 BogoMIPS (lpj=11210476)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Disabled at boot.
><4>Mount-cache hash table entries: 256
><6>CPU: Trace cache: 12K uops, L1 D cache: 16K
><6>CPU: L2 cache: 1024K
><4>using mwait in idle threads.
><6>CPU: Physical Processor ID: 0
><6>CPU0: Thermal monitoring enabled (TM1)
><6>mtrr: v2.0 (20020519)
><6>checking if image is initramfs... it is
><6>ACPI: Looking for DSDT in initrd... not found!
><4> not found!
><4> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
><4>Parsing all Control Methods:.....................................................................
><4>Table [DSDT](id F004) - 222 Objects with 28 Devices 69 Methods 10 Regions
><4>ACPI Namespace successfully loaded at root ffffffff8056cd80
><4>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
><6>Using local APIC timer interrupts.
><6>Detected 12.500 MHz APIC timer.
><6>Booting processor 1/4 APIC 0x6
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 5600.62 BogoMIPS (lpj=11201245)
><6>CPU: Trace cache: 12K uops, L1 D cache: 16K
><6>CPU: L2 cache: 1024K
><6>CPU: Physical Processor ID: 3
><6>CPU1: Thermal monitoring enabled (TM1)
><4>                  Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
><7>APIC error on CPU1: 00(40)
><6>CPU 1: Syncing TSC to CPU 0.
><6>CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 1211 cycles)
><6>Booting processor 2/4 APIC 0x1
><4>Initializing CPU#2
><4>Calibrating delay using timer specific routine.. 5600.08 BogoMIPS (lpj=11200174)
><6>CPU: Trace cache: 12K uops, L1 D cache: 16K
><6>CPU: L2 cache: 1024K
><6>CPU: Physical Processor ID: 0
><6>CPU2: Thermal monitoring enabled (TM1)
><4>                  Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
><7>APIC error on CPU2: 00(40)
><6>CPU 2: Syncing TSC to CPU 0.
><6>CPU 2: synchronized TSC with CPU 0 (last diff 31 cycles, maxerr 987 cycles)
><6>Booting processor 3/4 APIC 0x7
><4>Initializing CPU#3
><4>Calibrating delay using timer specific routine.. 5600.41 BogoMIPS (lpj=11200836)
><6>CPU: Trace cache: 12K uops, L1 D cache: 16K
><6>CPU: L2 cache: 1024K
><6>CPU: Physical Processor ID: 3
><6>CPU3: Thermal monitoring enabled (TM1)
><4>                  Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
><7>APIC error on CPU3: 00(40)
><6>CPU 3: Syncing TSC to CPU 0.
><6>CPU 3: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 1211 cycles)
><6>Brought up 4 CPUs
><6>time.c: Using HPET/TSC based timekeeping.
><6>testing NMI watchdog ... OK.
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using configuration type 1
><6>PCI: Using MMCONFIG at e0000000
><6>ACPI: Subsystem revision 20050408
><4>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1024 [06] ev_create_gpe_block   : Found 2 Wake, Enabled 0 Runtime GPEs in this block
><4>Completing Region/Field/Buffer/Package initialization:....................................
><4>Initialized 10/10 Regions 0/0 Fields 11/11 Buffers 15/21 Packages (231 nodes)
><4>Executing all Device _STA and_INI methods:..................................
><4>34 Devices found containing: 34 _STA, 0 _INI methods
><6>ACPI: Interpreter enabled
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><4>PCI: Probing PCI hardware (bus 00)
><6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
><4>PCI: PXH quirk detected, disabling MSI for SHPC device
><4>PCI: PXH quirk detected, disabling MSI for SHPC device
><7>Boot video device is 0000:04:0d.0
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO.PXHB._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO.PXHA._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PICH._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12)
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>PCI: Bridge: 0000:01:00.0
><6>  IO window: e000-efff
><6>  MEM window: dfd00000-dfefffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:01:00.2
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:02.0
><6>  IO window: e000-efff
><6>  MEM window: dfb00000-dfefffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: d000-dfff
><6>  MEM window: df900000-dfafffff
><6>  PREFETCH window: d0000000-d7ffffff
><4>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
><6>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:02.0 to 64
><4>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
><7>PCI: Setting latency timer of device 0000:01:00.0 to 64
><4>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
><7>PCI: Setting latency timer of device 0000:01:00.2 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
><6>hpet0: 69ns tick, 3 64-bit timers
><6>PCI-DMA: Disabling IOMMU.
><6>hotplug[215]: segfault at 00000000004000f0 rip 00000000004000f0 rsp 00007fffff84a760 error 15
><4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
><6>audit: initializing netlink socket (disabled)
><4>audit(1125302530.828:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>Intel E7520/7320/7525 detected.<6>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:02.0 to 64
><7>Allocate Port Service[pcie00]
><7>Allocate Port Service[pcie01]
><6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 6144k, total 16384k
><6>vesafb: mode is 1024x768x16, linelength=2048, pages=9
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 72942 bytes,<6>...found (1024x768, 12703 bytes, v3).
><4>Console: switching to colour frame buffer device 127x44
><6>fb0: VESA VGA frame buffer device
><6>Real Time Clock Driver v1.12
><4>hpet_acpi_add: no address or irqs in _CRS
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
><4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered
><4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
><6>loop: loaded (max 8 devices)
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker
><6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 3.38
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><4>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
><4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><4>ACPI wakeup devices: 
><4>PCI0 PALO  PXH PXHB PXHA PICH 
><6>ACPI: (supports S0 S4 S5)
><4>Freeing unused kernel memory: 212k freed
><5>SCSI subsystem initialized
><3>udev[998]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1013]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1014]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><3>udev[1018]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1023]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><0>init[1]: segfault at 000000000040836a rip 000000000040836a rsp 00007fffffccf800 error 15
><6>ICH5: IDE controller at PCI slot 0000:00:1f.1
><4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
><6>ICH5: chipset revision 2
><6>ICH5: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
><7>Probing IDE interface ide0...
><3>udev[1029]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><4>hda: HL-DT-STCD-RW/DVD-ROM GCC-4244N, ATAPI CD/DVD-ROM drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><7>libata version 1.11 loaded.
><3>udev[1043]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1044]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><7>ata_piix version 1.03
><6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177
><3>udev[1054]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1055]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>ata1: SATA max UDMA/133 cmd 0xCCB8 ctl 0xCCB2 bmdma 0xCC80 irq 177
><6>ata2: SATA max UDMA/133 cmd 0xCCA0 ctl 0xCC9A bmdma 0xCC88 irq 177
><7>ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3801 87:4003 88:407f
><6>ata1: dev 0 ATA, max UDMA/133, 156250000 sectors:
><6>ata1: dev 0 configured for UDMA/133
><6>scsi0 : ata_piix
><3>udev[1060]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><7>ata2: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3801 87:4003 88:407f
><6>ata2: dev 0 ATA, max UDMA/133, 156250000 sectors:
><6>ata2: dev 0 configured for UDMA/133
><6>scsi1 : ata_piix
><5>  Vendor: ATA       Model: Maxtor 6Y080M0    Rev: YAR5
><3>udev[1063]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
><5>SCSI device sda: drive cache: write back
><6> sda: sda1
><5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
><5>  Vendor: ATA       Model: Maxtor 6Y080M0    Rev: YAR5
><3>udev[1072]: run_program: exec of program '/sbin/modprobe' failed
><3>udev[1073]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><3>udev[1075]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1066]: import_file_into_env: can't open '/sbin/path_id /block/sda'
><7>Losing some ticks... checking if CPU frequency changed.
><5>SCSI device sdb: 156250000 512-byte hdwr sectors (80000 MB)
><5>SCSI device sdb: drive cache: write back
><5>SCSI device sdb: 156250000 512-byte hdwr sectors (80000 MB)
><5>SCSI device sdb: drive cache: write back
><6> sdb:<3>udev[1083]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1084]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><4> sdb1
><5>Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
><3>udev[1090]: run_program: exec of program '/sbin/modprobe' failed
><3>udev[1095]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1097]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1099]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1081]: import_file_into_env: can't open '/sbin/path_id /block/sdb'
><3>udev[1101]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1102]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>ACPI: CPU0 (power states: C1[C1])
><6>ACPI: CPU1 (power states: C1[C1])
><6>ACPI: CPU2 (power states: C1[C1])
><6>ACPI: CPU3 (power states: C1[C1])
><3>udev[1120]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1122]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>md: raid1 personality registered as nr 3
><3>udev[1129]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1140]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1141]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1144]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1158]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1159]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><3>udev[1160]: import_file_into_env: can't open '/sbin/path_id /block/hda'
><3>udev[1172]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[1171]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>md: Autodetecting RAID arrays.
><6>md: autorun ...
><6>md: considering sdb1 ...
><6>md:  adding sdb1 ...
><6>md:  adding sda1 ...
><6>md: created md0
><6>md: bind<sda1>
><6>md: bind<sdb1>
><6>md: running: <sdb1><sda1>
><6>raid1: raid set md0 active with 2 out of 2 mirrors
><6>md: ... autorun DONE.
><3>udev[1179]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><5>ReiserFS: md0: found reiserfs format "3.6" with standard journal
><5>ReiserFS: md0: using ordered data mode
><5>ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: md0: checking transaction log (md0)
><5>ReiserFS: md0: Using r5 hash to sort names
><6>md: Autodetecting RAID arrays.
><6>md: autorun ...
><6>md: ... autorun DONE.
><6>bootsplash: status on console 0 changed to on
><6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Mon Aug 29 10:06:19 2005
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>killprocInitializing random number generatordone
><notice>startproc: execve (/usr/sbin/sd-event-dispatch.pl) [ /usr/sbin/sd-event-dispatch.pl -o PidFile=/var/run/sd-event-dispatch.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/root _=/sbin/startproc DAEMON=/usr/sbin/sd-event-dispatch.pl ]
><notice>checkproc: /sbin/udevd 2267
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/root _=/sbin/startproc DAEMON=/sbin/resmgrd ]
><notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/root _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
><notice>startproc: execve (/usr/sbin/irqbalance) [ /usr/sbin/irqbalance ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/root _=/sbin/startproc DAEMON=/usr/sbin/irqbalance ]
>Starting irqbalance done
>Starting resource managerdone
>Starting D-BUS daemondone
>Starting SubDomain Event daemondone
>Loading SubDomain module done
>Mounting subdomainfs on /subdomain done
>Disabling OWLSM extension done
>Rebuilding certificate cache done
>Loading SubDomain profiles done
>Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
>doneLoading compose table winkeys shiftctrl latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>done<notice>killproc: kill(5180,15)
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ ROOTFS_FSTYPE=reiserfsL=POSIX INIT_V SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/root _=/sbin/startproc ]
> ], [ CONSOLE=/dev/console ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85libc/bin SHLVL=2 SPLASH=yes splash=silenRe-Starting syslog servicesdone
>Setting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>done    eth0      device: Intel Corporation 82541GI/PI Gigabit Ethernet Controller (rev 05)
>    eth0      configuration: eth-id-00:14:22:09:b1:31
>    eth0      (DHCP) . hostname: Host name lookup failure
>. . . . no IP address yet... backgrounding. 
>waiting
>    eth1      device: Intel Corporation 82541GI/PI Gigabit Ethernet Controller (rev 05)
>    eth1      No configuration found for eth1
>unusedWaiting for mandatory devices:  eth-id-00:14:22:09:b1:31
>14 13 11 10 9 <notice>pidofproc: dhcpcd 13747
>    eth0      device: Intel Corporation 82541GI/PI Gigabit Ethernet Controller (rev 05)
>    eth0      configuration: eth-id-00:14:22:09:b1:31
>    eth0      DHCP client (dhcpcd) is running
>    eth0      IP address: 132.199.176.99/16
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
>r/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/rendezvous.conf -bS_FSTYPE=reiserfs TERM=linux BOOT_IMAGE=Ltproc DAEMON=/usr/sbin/mdnsd ]
>Mount SMB/ CIFS File Systems unused
><notice>startproc: execve (/opt/gnome/bin/netdaemon) [ /opt/gnome/bin/netdaemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg HOME=/<notice>startproc: execve (/sbin/portmap) Starting mdnsddone
>Starting the netdaemondone
>Starting RPC portmap daemondone
>Importing Net File System (NFS)unused
>Starting nfsboot (sm-notify) done
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh REDIRECT=/dev/tty1 COLUMNS RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg LINES=44 ROOTFS_BLKDEV=/dev/roottproc DAEMON=/usr/sbin/cupsd<notice>startproc: execve (/usr/sbin/fam) [ /usr/sbin/fam -t 4 -T 0 -L ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/root _=/sbin/startproc DAEMON=/usr/sbin/fam ]
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/root _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
><notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/root _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
>Checking/updating CPU microcodedone
>Starting cupsddone
>Starting File Access Monitoring Daemondone
>Starting SSH daemondone
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/root _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting Name Service Cache Daemondone
><notice>startproc: execve (/opt/gnome/sbin/gdm) [ /opt/gnome/sbin/gdm ], [ LC_PAPER= LC_ADDRESS= LC_MONETARY= CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_NUMERIC= LC_ALL=POSIX LC_TELEPHONE= INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin LC_MESSAGES= RUNLEVEL=5 LC_IDENTIFICATION= LC_COLLATE= PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg LANG=de_DE.UTF-8 LC_MEASUREMENT= PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/gnome LC_CTYPE= splash=silent SPLASH=yes LC_TIME= ROOTFS_BLKDEV=/dev/root LC_NAME= _=/sbin/startproc DAEMON=/opt/gnome/sbin/gdm ]
><notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44acpid: loading ACPI modules (ac battery button ) done
>Starting acpid done
>Starting service gdmdone
><notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfgStarting INET services. (xinetd)done
>Try to get initial date and time via NTP from  ntp-2-a.dvm.klinik.uni-regensburg.de ntp-2-b.dvm.klinik.uni-regensburg.de ntp-2-c.dvm.klinik.uni-regensburg.de ntp-2-d.dvm.klinik.uni-regensburg.dedone
>Starting network time protocol daemon (NTPD)done
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/root _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
>Starting mail service (Postfix)done
>Starting powersaved  (accessing ACPI events over acpid) done
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/root _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>done
>Starting HAL daemon<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 BOOT_IMAGE=Linux splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/rootdone
>Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: smbfs nfs
><notice>checkproc: /opt/gnome/bi

Actions: View

Attachments on bug 106147: 46911 | 47929