Attachment 48071 Details for Bug 113323

boot.msg with nopmtimer passed while booting

boot.msg (text/plain), 22.00 KB, created by Chip Daiger on 2005-08-29 21:39:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chip Daiger

Created: 2005-08-29 21:39:22 UTC

Size: 22.00 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.13-rc6-git13-4-default
>Loaded 22933 symbols from /boot/System.map-2.6.13-rc6-git13-4-default.
>Symbols match kernel version 2.6.13.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><4>Bootdata ok (command line is root=/dev/hda1 vga=0x317 selinux=0    resume=/dev/hdb1  splash=silent nopmtimer)
><5>Linux version 2.6.13-rc6-git13-4-default (geeko@buildhost) (gcc version 4.0.2 20050818 (prerelease) (SUSE Linux)) #1 Mon Aug 22 18:38:22 UTC 2005
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000005fef0000 (usable)
><4> BIOS-e820: 000000005fef0000 - 000000005fef3000 (ACPI NVS)
><4> BIOS-e820: 000000005fef3000 - 000000005ff00000 (ACPI data)
><4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
><7>ACPI: RSDP (v000 RS480                                 ) @ 0x00000000000f7c50
><7>ACPI: RSDT (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000005fef3040
><7>ACPI: FADT (v002 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000005fef30c0
><7>ACPI: MCFG (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000005fef6b00
><7>ACPI: MADT (v001 RS480  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000005fef6a40
><7>ACPI: DSDT (v001 RS480  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
><7>On node 0 totalpages: 392944
><7>  DMA zone: 4096 pages, LIFO batch:1
><7>  Normal zone: 388848 pages, LIFO batch:31
><7>  HighMem zone: 0 pages, LIFO batch:1
><6>ACPI: PM-Timer IO Port: 0x4008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><6>Processor #0 15:15 APIC version 16
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><6>Setting APIC routing to flat
><6>Using ACPI (MADT) for SMP configuration information
><6>Allocating PCI resources starting at 5ff00000 (gap: 5ff00000:80100000)
><4>Checking aperture...
><4>CPU 0: aperture @ fffe000000 size 32 MB
><4>Aperture from northbridge cpu 0 too small (32 MB)
><4>No AGP bridge found
><4>Built 1 zonelists
><5>Kernel command line: root=/dev/hda1 vga=0x317 selinux=0    resume=/dev/hdb1  splash=silent nopmtimer
><6>bootsplash: silent mode.
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 131072 bytes)
><6>time.c: Using 1.193182 MHz PIT timer.
><6>time.c: Detected 1989.897 MHz processor.
><6>time.c: Using PIT/TSC based timekeeping.
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Memory: 1539360k/1571776k available (2364k kernel code, 31432k reserved, 1231k data, 176k init)
><4>Calibrating delay using timer specific routine.. 3987.38 BogoMIPS (lpj=7974765)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Disabled at boot.
><4>Mount-cache hash table entries: 256
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>mtrr: v2.0 (20020519)
><4>CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
><6>checking if image is initramfs... it is
><6>ACPI: Looking for DSDT in initrd... not found!
><4> not found!
><4> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
><4>Parsing all Control Methods:........................................................................................................................
><4>Table [DSDT](id F004) - 441 Objects with 44 Devices 120 Methods 18 Regions
><4>ACPI Namespace successfully loaded at root ffffffff804f5580
><4>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
><6>Using local APIC timer interrupts.
><6>Detected 12.436 MHz APIC timer.
><6>testing NMI watchdog ... OK.
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using configuration type 1
><6>ACPI: Subsystem revision 20050408
><4>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
><4>evgpeblk-1024 [06] ev_create_gpe_block   : Found 4 Wake, Enabled 1 Runtime GPEs in this block
><4>Completing Region/Field/Buffer/Package initialization:..............  psargs-0362: *** Error: Looking up [\_SB_.PCI0.LPC0.LNK0] in namespace, AE_NOT_FOUND
><4>search_node ffff81005fd9bcb0 start_node ffff81005fd9bcb0 return_node 0000000000000000
><4>
><4>  nsinit-0316 [06] ns_init_one_object    : Could not execute arguments for [PICM] (Package), AE_NOT_FOUND
><4>....................................
><4>Initialized 18/18 Regions 0/0 Fields 15/15 Buffers 17/22 Packages (450 nodes)
><4>Executing all Device _STA and_INI methods:...............................................
><4>47 Devices found containing: 47 _STA, 1 _INI methods
><6>ACPI: Interpreter enabled
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><4>PCI: Probing PCI hardware (bus 00)
><6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
><6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
><7>Boot video device is 0000:01:00.0
><6>PCI: Transparent bridge - 0000:00:14.4
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11), disabled.
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><3>PCI: Cannot allocate resource region 3 of device 0000:00:00.0
><6>PCI: Bridge: 0000:00:14.4
><6>  IO window: e000-efff
><6>  MEM window: fb000000-fcffffff
><6>  PREFETCH window: d8000000-dfffffff
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><6>PCI-DMA: Disabling IOMMU.
><4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
><6>audit: initializing netlink socket (disabled)
><4>audit(1125338802.816:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20000080000, using 6144k, total 131072k
><6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 72942 bytes,<6>...found (1024x768, 12703 bytes, v3).
><4>Console: switching to colour frame buffer device 127x44
><6>fb0: VESA VGA frame buffer device
><6>Real Time Clock Driver v1.12
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered
><4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
><6>loop: loaded (max 8 devices)
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker
><6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 3.38
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
><4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><4>ACPI wakeup devices: 
><4>PCI0 USB0 USB1 USB2 AUDO  P2P  MAC 
><6>ACPI: (supports S0 S1 S3 S4bios S5)
><4>Freeing unused kernel memory: 176k freed
><3>udev[838]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><5>SCSI subsystem initialized
><3>udev[842]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[845]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[848]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[852]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><7>libata version 1.11 loaded.
><3>udev[857]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[860]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><7>sata_sil version 0.9
><6>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 177
><6>ata1: SATA max UDMA/100 cmd 0xFFFFC20000004080 ctl 0xFFFFC2000000408A bmdma 0xFFFFC20000004000 irq 177
><7>Losing some ticks... checking if CPU frequency changed.
><6>ata2: SATA max UDMA/100 cmd 0xFFFFC200000040C0 ctl 0xFFFFC200000040CA bmdma 0xFFFFC20000004008 irq 177
><6>ata1: no device found (phy stat 00000000)
><6>scsi0 : sata_sil
><3>udev[865]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>ata2: no device found (phy stat 00000000)
><6>scsi1 : sata_sil
><6>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 185
><6>ata3: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0xFFFFC20000006000 irq 185
><6>ata4: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0xFFFFC20000006008 irq 185
><3>udev[870]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>ata3: no device found (phy stat 00000000)
><6>scsi2 : sata_sil
><3>udev[873]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>ata4: no device found (phy stat 00000000)
><6>scsi3 : sata_sil
><3>udev[880]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[881]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><3>udev[885]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[888]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>ATIIXP: IDE controller at PCI slot 0000:00:14.1
><6>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
><6>ATIIXP: chipset revision 0
><6>ATIIXP: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0xf300-0xf307, BIOS settings: hda:pio, hdb:pio
><6>    ide1: BM-DMA at 0xf308-0xf30f, BIOS settings: hdc:pio, hdd:pio
><7>Probing IDE interface ide0...
><4>hda: WDC WD1600BB-22GUA0, ATA DISK drive
><4>hdb: ST3300831A, ATA DISK drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><7>Probing IDE interface ide1...
><3>udev[893]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[894]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><4>hdc: LITE-ON DVDRW SOHW-1633S, ATAPI CD/DVD-ROM drive
><4>hdd: LITE-ON CD-ROM LTN-489S, ATAPI CD/DVD-ROM drive
><4>ide1 at 0x170-0x177,0x376 on irq 15
><3>udev[900]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[903]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[904]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>ACPI: CPU0 (power states: C1[C1])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><3>udev[908]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[912]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[916]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[919]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>hda: max request size: 1024KiB
><6>hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
><6>hda: cache flushes supported
><3>udev[920]: import_file_into_env: can't open '/sbin/path_id /block/hda'
><6> hda: hda1 hda2
><6>hdb: max request size: 1024KiB
><6>hdb: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100)
><6>hdb: cache flushes supported
><3>udev[930]: import_file_into_env: can't open '/sbin/path_id /block/hdb'
><6> hdb: hdb1 hdb2
><3>udev[943]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[947]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[950]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><3>udev[953]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[954]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>hdd: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
><3>udev[955]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[956]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[959]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[961]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[963]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[964]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><4>Attempting manual resume
><3>swsusp: Suspend partition has wrong signature?
><3>udev[972]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><3>udev[976]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on hda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>bootsplash: status on console 0 changed to on
><6>md: Autodetecting RAID arrays.
><6>md: autorun ...
><6>md: ... autorun DONE.
><6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on hda2, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on hdb2, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console) at Mon Aug 29 18:06:47 2005
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Starting D-BUS daemondone
>Starting syslog servicesdone
>Setting up network interfaces:
>Initializing random number generatordone
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Starting resource managerdone
>Loading keymap qwerty/us.map.gz
>doneLoading compose table winkeys shiftctrl latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>done    lo        
>    lo        IP address: 127.0.0.1/8   
>doneWaiting for mandatory devices:  eth-id-00:11:09:02:f0:1a
>20 18 <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_PAPER= LC_ADDRESS= LC_MONETARY= CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL=POSIX LC_TELEPHONE= INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin LC_MESSAGES= vga=0x317 RUNLEVEL=5 LC_IDENTIFICATION= LC_COLLATE= SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PWD=/ LANG=en_US.UTF-8 LC_MEASUREMENT= PREVLEVEL=N LINES=44 SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE= SPLASH=yes splash=silent LC_TIME= ROOTFS_BLKDEV=/dev/hda1 LC_NAME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>Starting service kdmdone
>
>    eth0      device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>    eth0      configuration: eth-id-00:11:09:02:f0:1a
>    eth0      IP address: 192.168.1.2/24
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
>Starting mdnsd<notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/rendezvous.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
>done
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/portmap ]
>Starting RPC portmap daemondone
>Importing Net File System (NFS)unused
><notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
>Starting Samba NMB daemon done
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
>Starting cupsddone
>Checking/updating CPU microcodedone
>Starting nfsboot (sm-notify) done
>Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>done
><notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
>Starting Samba SMB daemon done
>Mount SMB/ CIFS File Systems unused
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting SSH daemondone
>Starting service kdmdone
><notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
>Starting mail service (Postfix)done
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>Starting CRON daemondone
><notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=127 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lib/klibc/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1024x768.cfg PREVLEVEL=N LINES=44 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>Starting INET services. (xinetd)done
>Starting HAL daemondone
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: nfs smbfs
><notice>killproc: kill(3883,3)
>

Actions: View

Attachments on bug 113323: 47848 | 47849 | 48071 | 48238 | 48390 | 48392 | 48515