Attachment 48149 Details for Bug 104647

Acer dmesg

dmesg.txt (text/plain), 32.12 KB, created by Stefan Behlert on 2005-08-30 12:01:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stefan Behlert

Created: 2005-08-30 12:01:16 UTC

Size: 32.12 KB

patch

obsolete

>Linux version 2.6.13-rc6-git13-4-default (geeko@buildhost) (gcc version 4.0.2 20050818 (prerelease) (SUSE Linux)) #1 Mon Aug 22 18:38:22 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f7df000 (usable)
> BIOS-e820: 000000001f7e0000 - 000000001f7fffc0 (ACPI data)
> BIOS-e820: 000000001f7fffc0 - 000000001f800000 (ACPI NVS)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>503MB LOWMEM available.
>On node 0 totalpages: 128991
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 124895 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 INSYDE                                ) @ 0x000e5010
>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x1f7f8c0b
>ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1f7ffb00
>ACPI: MADT (v001 STUPID MAPIC_00 0x30307830 ABCD 0x00010200) @ 0x1f7ffb90
>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x1f7f8e17
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1f7f8c3f
>ACPI: DSDT (v001 COMPAL EDL00    0x00000001 INTL 0x02002036) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 1f800000 (gap: 1f800000:e0700000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda10 vga=0x317 selinux=0    resume=/dev/sda5  splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1596.340 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 505968k/515964k available (2094k kernel code, 9496k reserved, 730k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3196.78 BogoMIPS (lpj=6393562)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1581k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
>Parsing all Control Methods:.........................................................................................................................................................................................................
>Table [DSDT](id F006) - 875 Objects with 72 Devices 201 Methods 26 Regions
>Parsing all Control Methods:...
>Table [SSDT](id F003) - 5 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:.
>Table [SSDT](id F004) - 1 Objects with 0 Devices 1 Methods 0 Regions
>ACPI Namespace successfully loaded at root c0442760
>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xe96c4, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1024 [06] ev_create_gpe_block   : Found 8 Wake, Enabled 4 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:.....................................................................
>Initialized 26/26 Regions 0/0 Fields 29/29 Buffers 14/28 Packages (890 nodes)
>Executing all Device _STA and_INI methods:............................................................................
>76 Devices found containing: 76 _STA, 2 _INI methods
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>Boot video device is 0000:00:02.0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: Embedded Controller [EC0] (gpe 29)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bus 2, cardbus bridge: 0000:01:04.0
>  IO window: 0000c000-0000cfff
>  IO window: 0000d000-0000dfff
>  PREFETCH window: 90000000-91ffffff
>  MEM window: c2000000-c3ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-dfff
>  MEM window: c0000000-cfffffff
>  PREFETCH window: 90000000-9fffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 169
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1125344359.180:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xa0000000, mapped to 0xe0080000, using 6144k, total 7872k
>vesafb: mode is 1024x768x16, linelength=2048, pages=4
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 72942 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 177
>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>AZAL RP01 RP02 RP03 RP04 USB1 USB2 USB3 USB4 USB7 ELAN MODM 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>udev[885]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>SCSI subsystem initialized
>udev[889]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[892]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[896]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>libata version 1.11 loaded.
>udev[901]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[904]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ahci version 1.01
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ahci: probe of 0000:00:1f.2 failed with error -12
>udev[908]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[911]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata_piix version 1.03
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
>ATA: abnormal status 0x7F on port 0x1F7
>ata1: disabling port
>scsi0 : ata_piix
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
>udev[916]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata2: dev 0 cfg 49:2f00 82:306b 83:7d09 84:6003 85:3068 86:3c09 87:6003 88:203f
>ata2: dev 0 ATA, max UDMA/100, 195371568 sectors: lba48
>ata2(0): applying bridge limits
>udev[920]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[918]: main: action, subsystem or devpath missing
>input: AT Translated Set 2 keyboard on isa0060/serio0
>udev[924]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata2: dev 1 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
>ata2: dev 1 ATAPI, max UDMA/33
>ata2(0): applying bridge limits
>ata2: dev 0 configured for UDMA/33
>ata2: dev 1 configured for UDMA/33
>scsi1 : ata_piix
>  Vendor: ATA       Model: ST9100822A        Rev: 3.02
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 <<3>udev[931]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
> sda5 sda6 sda7 sda8 sda9 sda10 >
>Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
>  Vendor: MATSHITA  Model: UJ-840D           Rev: 1003
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>udev[959]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[971]: run_program: exec of program '/sbin/modprobe' failed
>udev[972]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[929]: import_file_into_env: can't open '/sbin/path_id /block/sda'
>udev[974]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[975]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[976]: run_program: exec of program '/sbin/modprobe' failed
>udev[977]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[978]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[982]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>acpi_processor-0521 [06] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x1
>udev[986]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[990]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[995]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>udev[998]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1002]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1005]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1006]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1010]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1014]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1017]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1020]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1021]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1022]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1023]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1024]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1025]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1026]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1027]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
>udev[1031]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1033]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
>udev[1034]: main: action, subsystem or devpath missing
>psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>udev[1043]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1054]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1056]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1057]: main: action, subsystem or devpath missing
>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
>udev[1061]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1065]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
>udev[1064]: main: action, subsystem or devpath missing
>ReiserFS: sda10: found reiserfs format "3.6" with standard journal
>ReiserFS: sda10: using ordered data mode
>ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda10: checking transaction log (sda10)
>ReiserFS: sda10: Using r5 hash to sort names
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xa0000000
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 201, io base 0x00001200
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x00001220
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 209, io base 0x00001240
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001260
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hw_random: RNG not detected
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
>tpm: module not supported by Novell, setting U taint flag.
>tpm_nsc: module not supported by Novell, setting U taint flag.
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 201, io mem 0x1f800000
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>Adding 1052216k swap on /dev/sda5.  Priority:-1 extents:1
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>ieee1394: Initialized config rom entry `ip1394'
>ieee80211: module not supported by Novell, setting U taint flag.
>ieee80211: 802.11 data/management/control stack, 1.0.3
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>intel8x0_measure_ac97_clock: measured 55596 usecs
>intel8x0: clocking to 48000
>tpm_infineon: module not supported by Novell, setting U taint flag.
>tpm_inf 0000:00:1f.0: LPC-bus found at 0x2641
>tpm_inf: probe of 0000:00:1f.0 failed with error -5
>b44.c:v0.95 (Aug 3, 2004)
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 225
>eth0: Broadcom 4400 10/100BaseT Ethernet 00:0f:b0:5e:75:38
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 177
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[c0004000-c00047ff]  Max Packet=[2048]
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 169
>Yenta: CardBus bridge found at 0000:01:04.0 [1025:007a]
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 22 (level, low) -> IRQ 233
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>Yenta: ISA IRQ mask 0x0000, PCI irq 169
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff
>cs: IO port probe 0xc000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc0000000 - 0xcfffffff
>pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 1, lun 0
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f517140012f]
>cs: IO port probe 0x3d4-0x4ff: excluding 0x3f4-0x3fb 0x4cc-0x4d3
>cs: IO port probe 0x3c0-0x3d2: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f
>cs: IO port probe 0xa00-0xaff: clean.
>bootsplash: status on console 0 changed to on
>SubDomain: SubDomain (version 1.2-13.42r5011imnx_suse) initialized
>SubDomain: Control variable 'owlsm' changed to 0
>NET: Registered protocol family 17
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>[drm] Initialized drm 1.0.0 20040925
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
>mtrr: 0xa0000000,0x10000000 overlaps existing 0xa0000000,0x400000
>[drm] Initialized i915 1.1.0 20040405 on minor 0: 
>mtrr: base(0xa0020000) is not aligned on a size(0x300000) boundary
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is on for TX and on for RX.
>mtrr: 0xa0000000,0x10000000 overlaps existing 0xa0000000,0x400000
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID0]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>bootsplash: status on console 0 changed to on
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c0383cc0(lo)
>IPv6 over IPv4 tunneling driver
>eth1: no IPv6 routers present
>powernow: This module only works with AMD K7 CPUs
>acpi-cpufreq: CPU0 - ACPI performance management activated.
>bootsplash: status on console 0 changed to on
>Bluetooth: Core ver 2.7
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ipw2200: Firmware error detected.  Restarting.
>ipw2200: Firmware error detected.  Restarting.
>eth1: no IPv6 routers present
>uhci_hcd 0000:00:1d.3: remove, state 1
>usb usb4: USB disconnect, address 1
>uhci_hcd 0000:00:1d.3: USB bus 4 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>uhci_hcd 0000:00:1d.2: remove, state 1
>usb usb3: USB disconnect, address 1
>uhci_hcd 0000:00:1d.2: USB bus 3 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: remove, state 1
>usb usb2: USB disconnect, address 1
>uhci_hcd 0000:00:1d.1: USB bus 2 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: remove, state 1
>usb usb1: USB disconnect, address 1
>uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[00023f517140012f]
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>Stopping tasks: ============================================================================================================|
>Freeing memory...  -\|/-\done (88862 pages freed)
>ACPI: PCI interrupt for device 0000:01:04.0 disabled
>ACPI: PCI interrupt for device 0000:01:01.0 disabled
>ACPI: PCI interrupt for device 0000:00:1e.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>acpi_bus-0212 [04] acpi_bus_set_power    : Device is not power manageable
>cpufreq: suspend failed to assert current frequency is what timing core thinks it is.
>swsusp: Need to copy 28218 pages
>swsusp: Restoring Highmem
>cpufreq: resume failed to assert current frequency is what timing core thinks it is.
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
>ata2: command 0x35 timeout, stat 0x50 host_stat 0x60
>acpi_bus-0212 [04] acpi_bus_set_power    : Device is not power manageable
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 restarted, EHCI 1.00, driver 10 Dec 2004
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 225
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 169
>psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>Restarting tasks... done
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is on for TX and on for RX.
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 22 (level, low) -> IRQ 233
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 177
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[c0004000-c00047ff]  Max Packet=[2048]
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 201, io base 0x00001200
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x00001220
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 209, io base 0x00001240
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001260
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f517140012f]
>eth1: no IPv6 routers present
>psmouse.c: TouchPad at isa0060/serio4/input0 - driver resynched.
>nfs: server hilbert not responding, still trying
>nfs: server hilbert not responding, still trying
>nfs: server hilbert OK
>nfs: server hilbert OK
>uhci_hcd 0000:00:1d.3: remove, state 1
>usb usb4: USB disconnect, address 1
>uhci_hcd 0000:00:1d.3: USB bus 4 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>uhci_hcd 0000:00:1d.2: remove, state 1
>usb usb3: USB disconnect, address 1
>uhci_hcd 0000:00:1d.2: USB bus 3 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: remove, state 1
>usb usb2: USB disconnect, address 1
>uhci_hcd 0000:00:1d.1: USB bus 2 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: remove, state 1
>usb usb1: USB disconnect, address 1
>uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[00023f517140012f]
>ACPI: PCI interrupt for device 0000:01:02.0 disabled
>Stopping tasks: ==================================================================================================|
>Freeing memory...  -\|/-\done (91011 pages freed)
>ACPI: PCI interrupt for device 0000:01:04.0 disabled
>ACPI: PCI interrupt for device 0000:01:01.0 disabled
>ACPI: PCI interrupt for device 0000:00:1e.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>acpi_bus-0212 [07] acpi_bus_set_power    : Device is not power manageable
>cpufreq: suspend failed to assert current frequency is what timing core thinks it is.
>swsusp: Need to copy 26450 pages
>swsusp: Restoring Highmem
>cpufreq: resume failed to assert current frequency is what timing core thinks it is.
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
>ata2: command 0x35 timeout, stat 0x50 host_stat 0x60
>acpi_bus-0212 [07] acpi_bus_set_power    : Device is not power manageable
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 restarted, EHCI 1.00, driver 10 Dec 2004
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 225
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 169
>psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
>Restarting tasks... done
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is on for TX and on for RX.
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 22 (level, low) -> IRQ 233
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 177
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]  MMIO=[c0004000-c00047ff]  Max Packet=[2048]
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 201, io base 0x00001200
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 185, io base 0x00001220
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 209, io base 0x00001240
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001260
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f517140012f]
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 104647: 48149 | 48150 | 48151 | 48153 | 48154 | 48155 | 48189 | 49281