Attachment 48153 Details for Bug 104647

dmesg FSC

dmesg_FSC (text/plain), 26.50 KB, created by Alexander Schaefer on 2005-08-30 12:20:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexander Schaefer

Created: 2005-08-30 12:20:40 UTC

Size: 26.50 KB

patch

obsolete

>Linux version 2.6.13-rc6-git13-4-default (geeko@buildhost) (gcc version 4.0.2 20050818 (prerelease) (SUSE Linux)) #1 Mon Aug 22 18:38:22 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
> BIOS-e820: 000000001f6e0000 - 000000001f6ea000 (ACPI data)
> BIOS-e820: 000000001f6ea000 - 000000001f700000 (ACPI NVS)
> BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>502MB LOWMEM available.
>On node 0 totalpages: 128736
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 124640 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>ACPI: RSDP (v000 FUJ___                                ) @ 0x000f64c0
>ACPI: RSDT (v001 FUJ___ EF6_____ 0x20040510  LTP 0x00000000) @ 0x1f6e254e
>ACPI: MADT (v001 FUJ___ EF6_____ 0x20040510 LOHR 0x0000005f) @ 0x1f6e9e88
>ACPI: FADT (v001 FUJ___ EF6_____ 0x20040510 LOHR 0x0000005f) @ 0x1f6e9ef0
>ACPI: BOOT (v001 FUJ___ M460     0x20040510  LTP 0x00000001) @ 0x1f6e9fd8
>ACPI: MCFG (v001 FUJ___ EF6_____ 0x20040510 LOHR 0x0000005f) @ 0x1f6e9f9c
>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1f6e2988
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1f6e27a7
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x1f6e258e
>ACPI: DSDT (v001 FUJ___ EF6_____ 0x20040510 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda4 vga=0x314 selinux=0    resume=/dev/sda3  splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1729.351 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 504944k/514944k available (2094k kernel code, 9476k reserved, 730k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3463.36 BogoMIPS (lpj=6926726)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1569k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
>Parsing all Control Methods:..........................................................................................................................................................................................................................................
>Table [DSDT](id F007) - 810 Objects with 69 Devices 234 Methods 22 Regions
>Parsing all Control Methods:...
>Table [SSDT](id F003) - 5 Objects with 0 Devices 3 Methods 0 Regions
>Parsing all Control Methods:.
>Table [SSDT](id F004) - 1 Objects with 0 Devices 1 Methods 0 Regions
>Parsing all Control Methods:..
>Table [SSDT](id F005) - 10 Objects with 0 Devices 2 Methods 0 Regions
>ACPI Namespace successfully loaded at root c0442760
>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd954, last bus=6
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20050408
>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1024 [06] ev_create_gpe_block   : Found 3 Wake, Enabled 6 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:...........................................................
>Initialized 22/22 Regions 0/0 Fields 23/23 Buffers 14/18 Packages (835 nodes)
>Executing all Device _STA and_INI methods:....................................................................
>68 Devices found containing: 68 _STA, 1 _INI methods
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>Boot video device is 0000:00:02.0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *10
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>ACPI: Embedded Controller [EC0] (gpe 28)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 7, cardbus bridge: 0000:06:09.0
>  IO window: 00004000-00004fff
>  IO window: 00005000-00005fff
>  PREFETCH window: 20000000-21ffffff
>  MEM window: 24000000-25ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: b0100000-b01fffff
>  PREFETCH window: 20000000-22ffffff
>PCI: Device 0000:00:1c.0 not available because of resource collisions
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Device 0000:00:1c.1 not available because of resource collisions
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:06:09.0 to 64
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1125410954.196:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>PCI: Device 0000:00:1c.0 not available because of resource collisions
>PCI: Device 0000:00:1c.1 not available because of resource collisions
>vesafb: framebuffer at 0xc0000000, mapped to 0xe0080000, using 3750k, total 7872k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 49925 bytes,<6>...found (800x600, 8809 bytes, v3).
>Console: switching to colour frame buffer device 99x34
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 177
>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>AZAL USB7 PCIB MODM 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>udev[883]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>SCSI subsystem initialized
>udev[887]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[890]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[895]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>udev[898]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[902]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[905]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ICH6: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
>ICH6: chipset revision 4
>ICH6: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: _NEC DVD+/-RW ND-6500A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>udev[911]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>libata version 1.11 loaded.
>udev[916]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[919]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ahci version 1.01
>acpi_bus-0212 [02] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
>udev[920]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0
>udev[924]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[926]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>input: SynPS/2 Synaptics TouchPad on isa0060/serio1
>udev[927]: main: action, subsystem or devpath missing
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
>ahci(0000:00:1f.2) flags: 64bit ncq pm led slum part 
>ata1: SATA max UDMA/133 cmd 0xE0026D00 ctl 0x0 bmdma 0x0 irq 193
>ata2: SATA max UDMA/133 cmd 0xE0026D80 ctl 0x0 bmdma 0x0 irq 193
>ata3: SATA max UDMA/133 cmd 0xE0026E00 ctl 0x0 bmdma 0x0 irq 193
>ata4: SATA max UDMA/133 cmd 0xE0026E80 ctl 0x0 bmdma 0x0 irq 193
>ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:3e09 87:6063 88:203f
>ata1: dev 0 ATA, max UDMA/100, 117210240 sectors: lba48
>ata1: dev 0 configured for UDMA/100
>scsi0 : ahci
>udev[935]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata2: no device found (phy stat 00000000)
>scsi1 : ahci
>udev[938]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata3: no device found (phy stat 00000000)
>scsi2 : ahci
>udev[941]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ata4: no device found (phy stat 00000000)
>scsi3 : ahci
>  Vendor: ATA       Model: FUJITSU MHT2060B  Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>SCSI device sda: drive cache: write back
> sda:<3>udev[948]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
> sda1 sda2 < sda5 > sda3 sda4
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>udev[964]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[967]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[971]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>acpi_processor-0521 [08] acpi_processor_get_inf: Error getting cpuindex for acpiid 0x1
>udev[975]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[976]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ACPI: Thermal Zone [THRM] (43 C)
>udev[987]: run_program: exec of program '/sbin/modprobe' failed
>udev[988]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[989]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[993]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[946]: import_file_into_env: can't open '/sbin/path_id /block/sda'
>udev[995]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[998]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1002]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1006]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1009]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>udev[1010]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1013]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1016]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1017]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1018]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1019]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>udev[1027]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ReiserFS: sda4: found reiserfs format "3.6" with standard journal
>ReiserFS: sda4: using ordered data mode
>ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda4: checking transaction log (sda4)
>ReiserFS: sda4: Using r5 hash to sort names
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>NTFS driver 2.1.23 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c0383cc0(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (4023 buckets, 32184 max) - 248 bytes per conntrack
>Adding 1020116k swap on /dev/sda3.  Priority:-1 extents:1
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>uhci_hcd: Unknown symbol usb_hcd_pci_suspend
>uhci_hcd: Unknown symbol usb_hcd_resume_root_hub
>uhci_hcd: Unknown symbol usb_hcd_pci_probe
>uhci_hcd: Unknown symbol usb_check_bandwidth
>uhci_hcd: Unknown symbol usb_disabled
>uhci_hcd: Unknown symbol usb_release_bandwidth
>uhci_hcd: Unknown symbol usb_claim_bandwidth
>uhci_hcd: Unknown symbol usb_hcd_pci_resume
>uhci_hcd: Unknown symbol usb_hcd_giveback_urb
>uhci_hcd: Unknown symbol usb_hcd_poll_rh_status
>uhci_hcd: Unknown symbol usb_hcd_pci_remove
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 209, io base 0x00001820
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 193, io base 0x00001840
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: shpc_init : shpc_cap_offset == 0
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001860
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001880
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hw_random: cannot enable RNG, aborting
>usb 4-1: new low speed USB device using uhci_hcd and address 2
>acpi_bus-0212 [05] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>acpi_bus-0212 [05] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 209, io mem 0xb0040000
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 4-1: USB disconnect, address 2
>intel8x0_measure_ac97_clock: measured 54346 usecs
>intel8x0: clocking to 48000
>r8169 Gigabit Ethernet driver 2.2LK loaded
>acpi_bus-0212 [05] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 193
>eth0: Identified chip type is 'RTL8169s/8110s'.
>eth0: RTL8169 at 0xe056c000, 00:c0:9f:95:e4:25, IRQ 193
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>usb 4-1: new low speed USB device using uhci_hcd and address 3
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
>tpm: module not supported by Novell, setting U taint flag.
>tpm_nsc: module not supported by Novell, setting U taint flag.
>tpm_infineon: module not supported by Novell, setting U taint flag.
>tpm_inf 0000:00:1f.0: LPC-bus found at 0x2641
>tpm_inf: probe of 0000:00:1f.0 failed with error -5
>ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 16 (level, low) -> IRQ 169
>Yenta: CardBus bridge found at 0000:06:09.0 [1734:107d]
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 169
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
>pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x22ffffff
>ieee80211: module not supported by Novell, setting U taint flag.
>ieee80211: 802.11 data/management/control stack, 1.0.3
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>acpi_bus-0212 [05] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 17 (level, low) -> IRQ 217
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ieee1394: Initialized config rom entry `ip1394'
>ipw2200: Radio Frequency Kill Switch is On:
>Kill switch must be turned off for wireless networking to work.
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 18 (level, low) -> IRQ 185
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185]  MMIO=[b0106800-b0106fff]  Max Packet=[2048]
>usbcore: registered new driver hiddev
>input.c: calling hotplug without a hotplug agent defined
>input: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:1d.3-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>bootsplash: status on console 0 changed to on
>cs: IO port probe 0x3d4-0x4ff: excluding 0x4cc-0x4d3
>cs: IO port probe 0x3c0-0x3d2: clean.
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
>cs: IO port probe 0x800-0x8ff: excluding 0x800-0x80f
>cs: IO port probe 0xa00-0xaff: clean.
>SubDomain: SubDomain (version 1.2-13.42r5011imnx_suse) initialized
>SubDomain: Control variable 'owlsm' changed to 0
>r8169: eth0: link up
>NET: Registered protocol family 17
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f0000506cfa]
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>mtrr: 0xc0000000,0x10000000 overlaps existing 0xc0000000,0x400000
>eth1: no IPv6 routers present
>ACPI: AC Adapter [ACAD] (off-line)
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>bootsplash: status on console 0 changed to on
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>     osl-1048 [87] os_wait_semaphore     : Failed to acquire semaphore[c145d560|1|0], AE_TIME
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:08:00:46:d2:3c:99:08:00 SRC=10.10.100.236 DST=224.0.0.251 LEN=130 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=110 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0d:60:78:28:b7:08:00 SRC=10.10.103.197 DST=224.0.0.251 LEN=72 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=52 
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:08:00:46:d2:3c:99:08:00 SRC=10.10.100.236 DST=224.0.0.251 LEN=130 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=110 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0d:60:78:28:b7:08:00 SRC=10.10.103.197 DST=224.0.0.251 LEN=72 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=52 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:08:00:46:d2:3c:99:08:00 SRC=10.10.100.236 DST=224.0.0.251 LEN=130 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=110 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:09:6b:06:18:4c:08:00 SRC=10.10.103.0 DST=224.0.0.251 LEN=70 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=50 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:08:00:46:d2:3c:99:08:00 SRC=10.10.100.236 DST=224.0.0.251 LEN=130 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=110 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0d:60:78:28:b7:08:00 SRC=10.10.103.197 DST=224.0.0.251 LEN=72 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=52 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:09:6b:06:18:4c:08:00 SRC=10.10.103.0 DST=224.0.0.251 LEN=102 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=82 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:08:00:46:d2:3c:99:08:00 SRC=10.10.100.236 DST=224.0.0.251 LEN=130 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=110 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:08:00:46:d2:3c:99:08:00 SRC=10.10.100.236 DST=224.0.0.251 LEN=130 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=110 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:09:6b:06:18:4c:08:00 SRC=10.10.103.0 DST=224.0.0.251 LEN=102 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=82 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:08:00:46:d2:3c:99:08:00 SRC=10.10.100.236 DST=224.0.0.251 LEN=130 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=110 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:0d:60:78:28:b7:08:00 SRC=10.10.103.197 DST=224.0.0.251 LEN=72 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=52 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:09:6b:06:18:4c:08:00 SRC=10.10.103.0 DST=224.0.0.251 LEN=102 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=82 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=01:00:5e:00:00:fb:00:09:6b:06:18:4c:08:00 SRC=10.10.103.0 DST=224.0.0.251 LEN=102 TOS=0x00 PREC=0x00 TTL=255 ID=5 DF PROTO=UDP SPT=5353 DPT=5353 LEN=82

Actions: View

Attachments on bug 104647: 48149 | 48150 | 48151 | 48153 | 48154 | 48155 | 48189 | 49281