Attachment 48162 Details for Bug 114109

dmesg

dmesg (text/plain), 12.82 KB, created by Anna Maresova on 2005-08-30 13:01:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Anna Maresova

Created: 2005-08-30 13:01:37 UTC

Size: 12.82 KB

patch

obsolete

>Total memory = 640MB; using 2048kB for hash table (at c0800000)
>Linux version 2.6.13-rc6-git13-4-default (geeko@buildhost) (gcc version 4.0.2 20050818 (prerelease) (SUSE Linux)) #1 Mon Aug 22 18:38:22 UTC 2005
>Found a Paddington mac-io controller, rev: 0, mapped at 0xfdf80000
>PowerMac motherboard: Blue&White G3
>Found Grackle (MPC106) PCI host bridge at 0x80000000. Firmware bus number: 0->1
>nvram: OF partition at 0x140
>nvram: XP partition at 0x11b0
>nvram: NR partition at 0x12b0
>On node 0 totalpages: 163840
>  DMA zone: 163840 pages, LIFO batch:31
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>Built 1 zonelists
>Kernel command line: root=/dev/sda8 resume=/dev/sda6 quiet sysrq=1 
>System has 64 possible interrupts
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>GMT Delta read from XPRAM: 60 minutes, DST: off
>via_calibrate_decr: ticks per jiffy = 24934 (1496048 ticks)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 640768k available (2848k kernel code, 1600k data, 188k init, 0k highmem)
>Calibrating delay loop... 794.62 BogoMIPS (lpj=397312)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>device-tree: property "l2-cache" name conflicts with node in /cpus/PowerPC,750@0
>checking if image is initramfs... it is
>Freeing initrd memory: 1336k freed
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>PCI: Cannot allocate resource region 0 of PCI bridge 1
>PCI: bridge 1 resource 0 moved to 7ff000..7fffff
>PCI: Cannot allocate resource region 0 of device 0000:01:01.0
>PCI: Cannot allocate resource region 1 of device 0000:01:01.0
>PCI: Cannot allocate resource region 2 of device 0000:01:01.0
>PCI: Cannot allocate resource region 3 of device 0000:01:01.0
>PCI: Cannot allocate resource region 4 of device 0000:01:01.0
>PCI: Cannot allocate resource region 1 of device 0000:00:10.0
>PCI: Cannot allocate resource region 0 of device 0000:01:04.0
>PCI: Enabling device 0000:01:04.0 (0010 -> 0013)
>Registering pmac pic with sysfs...
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>Thermal assist unit using timers, shrink_timer: 2000 jiffies
>audit: initializing netlink socket (disabled)
>audit(1125409109.563:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>PCI: Enabling device 0000:00:10.0 (0086 -> 0087)
>aty128fb: Found Open Firmware ROM Image
>aty128fb: BIOS not located, guessing timings.
>aty128fb: Rage128 RE PCI [chip rev 0x2] 16M 128-bit SDR SGRAM (1:1)
>Console: switching to colour frame buffer device 128x48
>fb0: ATY Rage128 frame buffer device on Rage128 RE PCI
>isapnp: ISA Plug & Play support disabled
>Generic RTC Driver v1.07
>Macintosh non-volatile memory driver v1.1
>serial8250_init: nothing to do on this board
>pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>ttyS0 at MMIO 0x80813020 (irq = 15) is a Z85c30 ESCC - Serial port
>ttyS1 at MMIO 0x80813000 (irq = 16) is a Z85c30 ESCC - Infrared port
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 123456K size 1024 blocksize
>loop: loaded (max 8 devices)
>MacIO PCI driver attached to Paddington chipset
>Can't request resource 0 for MacIO device 0.00000000:power-mg
>input: Macintosh mouse button emulation
>Macintosh CUDA driver v0.5 for Unified ADB.
>apm_emu: Requires a machine with a PMU.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>CMD646: IDE controller at PCI slot 0000:01:01.0
>CMD646: chipset revision 5
>CMD646: chipset revision 0x05, UltraDMA Capable
>CMD646: 100% native mode on irq 26
>    ide0: BM-DMA at 0x7ff020-0x7ff027, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0x7ff028-0x7ff02f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>adb: starting probe task...
>adb devices:
>adb: finished probe task...
>Probing IDE interface ide1...
>ide2: Found Apple Heathrow ATA controller, bus ID 0, irq 13
>Probing IDE interface ide2...
>hde: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive
>hde: Enabling MultiWord DMA 2
>ide2 at 0xe901a000-0xe901a007,0xe901a160 on irq 13
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:01:06.0: OHCI Host Controller
>ohci_hcd 0000:01:06.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:01:06.0: irq 28, io mem 0x80880000
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using ohci_hcd and address 2
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-2: new low speed USB device using ohci_hcd and address 3
>usbcore: registered new driver hiddev
>input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:01:06.0-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>TCP westwood registered
>TCP htcp registered
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 188k init 4k chrp 32k prep
>usb 1-1.1: new low speed USB device using ohci_hcd and address 4
>udev[764]: run_program: exec of program '/sbin/hwup' failed
>udev[765]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[762]: main: action, subsystem or devpath missing
>input: USB HID v1.00 Keyboard [Alps Electric M2452] on usb-0000:01:06.0-1.1
>udev[769]: run_program: exec of program '/sbin/hwup' failed
>udev[770]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[771]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[773]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>usb 1-1.2: new low speed USB device using ohci_hcd and address 5
>input: USB HID v1.00 Mouse [Logitech M4848] on usb-0000:01:06.0-1.2
>udev[811]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[805]: main: action, subsystem or devpath missing
>udev[812]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[813]: run_program: exec of program '/sbin/hwup' failed
>udev[814]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[815]: run_program: exec of program '/sbin/hwup' failed
>udev[816]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[817]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[873]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>SCSI subsystem initialized
>udev[877]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[880]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[884]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[888]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[891]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 2940B Ultra2 SCSI adapter>
>        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
>udev[897]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[900]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[901]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>  Vendor: IBM       Model: DDRS-39130D       Rev: DC2A
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>scsi0:A:0:0: Tagged Queuing enabled.  Depth 32
> target0:0:0: Beginning Domain Validation
> target0:0:0: wide asynchronous.
> target0:0:0: Domain Validation skipping write tests
> target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
> target0:0:0: Ending Domain Validation
>SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
>SCSI device sda: drive cache: write back
> sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>udev[933]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[937]: run_program: exec of program '/sbin/modprobe' failed
>udev[938]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[939]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[940]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[904]: import_file_into_env: can't open '/sbin/path_id /block/sda'
>udev[942]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[945]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[946]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[949]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[952]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[955]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[958]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[961]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[964]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[965]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[968]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[971]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[972]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[975]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[976]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[977]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[978]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[979]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[982]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[985]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[988]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[991]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[994]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[997]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1000]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1003]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1006]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1009]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1012]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1015]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1018]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1021]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1024]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1027]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1030]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1034]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>mesh: configured for synchronous 5 MB/s
>udev[1037]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>mesh: performing initial bus reset...
>scsi1 : MESH
>udev[1041]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 217920k swap on /dev/sda6.  Priority:-1 extents:1
>EXT3 FS on sda8, internal journal
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c034ef08(lo)
>IPv6 over IPv4 tunneling driver
>hde: ATAPI 48X DVD-ROM drive, 128kB Cache, (U)DMA
>Uniform CD-ROM driver Revision: 3.20
>ISO 9660 Extensions: RRIP_1991A
>eth0: BMAC+ at 00:05:02:b1:fd:b8
>phy registers:
> 1400 782d 7810 0001 00a1 05e1 0001 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 4000 0000 2ffb 0010 0000 0002
> 0001 0000 0000 0000 0000 0000 0000 0000
>ip_tables: (C) 2000-2002 Netfilter core team
>eth0: no IPv6 routers present
>input.c: calling hotplug without a hotplug agent defined
>lp: driver loaded but no devices found
>phy registers:
> 1000 7829 7810 0001 01e1 05e1 0003 0000
> 0000 0000 0000 0000 0000 0000 0000 0000
> 0000 0000 4000 0000 3ff9 0010 0000 0002
> 0001 0000 0000 0000 0000 0000 0000 0000
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 114109: 48162