Attachment 48203 Details for Bug 114171

/var/log/messages

messages (text/plain), 17.31 KB, created by Charles Coffing on 2005-08-30 16:42:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Charles Coffing

Created: 2005-08-30 16:42:55 UTC

Size: 17.31 KB

patch

obsolete

>Aug 30 09:15:30 xen1 syslog-ng[3942]: syslog-ng version 1.6.8 starting
>Aug 30 09:15:30 xen1 iscsid: version 0.3 variant (22-Apr-2005)
>Aug 30 09:15:30 xen1 iscsid: iSCSI daemon with pid=3907 started!
>Aug 30 09:15:31 xen1 hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
>Aug 30 09:15:32 xen1 syslog-ng[3942]: Changing permissions on special file /dev/xconsole
>Aug 30 09:15:32 xen1 syslog-ng[3942]: Changing permissions on special file /dev/tty10
>Aug 30 09:15:32 xen1 ifup: No configuration found for vif0.0
>Aug 30 09:15:32 xen1 ifup: No configuration found for veth0
>Aug 30 09:15:34 xen1 /usr/sbin/cron[4298]: (CRON) STARTUP (V5.0)
>Aug 30 09:15:35 xen1 kernel: klogd 1.4.1, log source = /proc/kmsg started.
>Aug 30 09:15:35 xen1 kernel: parport: PnPBIOS parport detected.
>Aug 30 09:15:35 xen1 kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>Aug 30 09:15:35 xen1 kernel: lp0: using parport0 (interrupt-driven).
>Aug 30 09:15:35 xen1 kernel: usbcore: registered new driver usbfs
>Aug 30 09:15:35 xen1 kernel: usbcore: registered new driver hub
>Aug 30 09:15:35 xen1 kernel: USB Universal Host Controller Interface driver v2.3
>Aug 30 09:15:35 xen1 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>Aug 30 09:15:35 xen1 kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
>Aug 30 09:15:35 xen1 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Aug 30 09:15:35 xen1 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>Aug 30 09:15:35 xen1 kernel: uhci_hcd 0000:00:1d.0: irq 17, io base 0x00002440
>Aug 30 09:15:35 xen1 kernel: hub 1-0:1.0: USB hub found
>Aug 30 09:15:35 xen1 kernel: hub 1-0:1.0: 2 ports detected
>Aug 30 09:15:35 xen1 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>Aug 30 09:15:35 xen1 kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
>Aug 30 09:15:35 xen1 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
>Aug 30 09:15:35 xen1 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>Aug 30 09:15:35 xen1 kernel: uhci_hcd 0000:00:1d.1: irq 18, io base 0x00002460
>Aug 30 09:15:35 xen1 kernel: hub 2-0:1.0: USB hub found
>Aug 30 09:15:35 xen1 kernel: hub 2-0:1.0: 2 ports detected
>Aug 30 09:15:35 xen1 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
>Aug 30 09:15:35 xen1 kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
>Aug 30 09:15:35 xen1 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
>Aug 30 09:15:35 xen1 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>Aug 30 09:15:35 xen1 kernel: uhci_hcd 0000:00:1d.2: irq 16, io base 0x00002480
>Aug 30 09:15:35 xen1 kernel: hub 3-0:1.0: USB hub found
>Aug 30 09:15:35 xen1 kernel: hub 3-0:1.0: 2 ports detected
>Aug 30 09:15:35 xen1 kernel: Linux agpgart interface v0.101 (c) Dave Jones
>Aug 30 09:15:35 xen1 kernel: agpgart: Detected an Intel 845G Chipset.
>Aug 30 09:15:35 xen1 kernel: agpgart: Detected 8060K stolen memory.
>Aug 30 09:15:35 xen1 kernel: agpgart: AGP aperture is 128M @ 0xf0000000
>Aug 30 09:15:35 xen1 kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>Aug 30 09:15:35 xen1 kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
>Aug 30 09:15:35 xen1 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
>Aug 30 09:15:35 xen1 kernel: ehci_hcd 0000:00:1d.7: debug port 1
>Aug 30 09:15:35 xen1 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>Aug 30 09:15:35 xen1 kernel: ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8480000
>Aug 30 09:15:35 xen1 kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>Aug 30 09:15:35 xen1 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>Aug 30 09:15:35 xen1 kernel: hub 4-0:1.0: USB hub found
>Aug 30 09:15:35 xen1 kernel: hub 4-0:1.0: 6 ports detected
>Aug 30 09:15:35 xen1 kernel: intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chipsets
>Aug 30 09:15:35 xen1 kernel: intelfb: Version 0.9.2
>Aug 30 09:15:35 xen1 kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
>Aug 30 09:15:35 xen1 kernel: intelfb: 00:02.0: Intel(R) 845G, aperture size 128MB, stolen memory 8060kB
>Aug 30 09:15:35 xen1 kernel: intelfb: Mode is interlaced.
>Aug 30 09:15:35 xen1 kernel: intelfb: Initial video mode is 1024x768-32@70.
>Aug 30 09:15:35 xen1 kernel: Console: switching to colour frame buffer device 128x48
>Aug 30 09:15:35 xen1 kernel: hw_random: RNG not detected
>Aug 30 09:15:35 xen1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Aug 30 09:15:35 xen1 kernel: shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
>Aug 30 09:15:35 xen1 kernel: shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
>Aug 30 09:15:35 xen1 kernel: e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
>Aug 30 09:15:35 xen1 kernel: e100: Copyright(c) 1999-2005 Intel Corporation
>Aug 30 09:15:35 xen1 kernel: ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 20
>Aug 30 09:15:35 xen1 kernel: e100: eth0: e100_probe: addr 0xf8500000, irq 20, MAC addr 00:08:02:C5:D9:2A
>Aug 30 09:15:35 xen1 kernel: i8xx TCO timer: initialized (0xf860). heartbeat=30 sec (nowayout=0)
>Aug 30 09:15:35 xen1 kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
>Aug 30 09:15:35 xen1 kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64
>Aug 30 09:15:35 xen1 kernel: intel8x0_measure_ac97_clock: measured 58201 usecs
>Aug 30 09:15:35 xen1 kernel: intel8x0: clocking to 48000
>Aug 30 09:15:35 xen1 kernel: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
>Aug 30 09:15:35 xen1 kernel: hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>Aug 30 09:15:35 xen1 kernel: ide: failed opcode was: unknown
>Aug 30 09:15:35 xen1 kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>Aug 30 09:15:35 xen1 kernel: SCSI subsystem initialized
>Aug 30 09:15:35 xen1 kernel: iscsi_tcp: module not supported by Novell, setting U taint flag.
>Aug 30 09:15:35 xen1 kernel: iscsi: registered transport (tcp)
>Aug 30 09:15:35 xen1 kernel: NET: Registered protocol family 10
>Aug 30 09:15:35 xen1 kernel: Disabled Privacy Extensions on device c0396160(lo)
>Aug 30 09:15:35 xen1 kernel: IPv6 over IPv4 tunneling driver
>Aug 30 09:15:35 xen1 kernel: ACPI: Power Button (FF) [PWRF]
>Aug 30 09:15:35 xen1 kernel: ACPI: Power Button (CM) [PBTN]
>Aug 30 09:15:35 xen1 kernel: microcode: Unknown symbol sys_munlock
>Aug 30 09:15:35 xen1 kernel: microcode: Unknown symbol sys_mlock
>Aug 30 09:15:35 xen1 kernel: BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>Aug 30 09:15:35 xen1 kernel: EDD information not available.
>Aug 30 09:15:36 xen1 ifup: No configuration found for sit0
>Aug 30 09:15:37 xen1 rcpowersaved: CPU frequency scaling is not supported by your processor.
>Aug 30 09:15:37 xen1 rcpowersaved: enter 'CPUFREQD_MODULE=off' in /etc/sysconfig/powersave/cpufreq to avoid this warning.
>Aug 30 09:15:37 xen1 rcpowersaved: Cannot load cpufreq governors - No cpufreq driver available
>Aug 30 09:15:37 xen1 [powersave]: WARNING (getSupportedSleepStates:19) Could not open /proc/acpi/sleep file to evaluate supported sleeping states
>Aug 30 09:15:37 xen1 [powersave]: ERROR (CPUFreq_Kernel:21) Could not set ondemand governor, seems as if the cpufreq_ondemand module is not loaded.
>Aug 30 09:15:37 xen1 [powersave]: ERROR (PM_Interface:234) Cannot create cpufreq objects
>Aug 30 09:15:37 xen1 [powersave]: WARNING (initHal:59) could not init hal library: (null)
>Aug 30 09:15:38 xen1 [powersave]: WARNING (filter_function:250) Received message from invalid interface
>Aug 30 09:15:38 xen1 [powersave]: WARNING (filter_function:250) Received message from invalid interface
>Aug 30 09:15:39 xen1 kernel: configfs: module not supported by Novell, setting U taint flag.
>Aug 30 09:15:39 xen1 kernel: ocfs2_nodemanager: module not supported by Novell, setting U taint flag.
>Aug 30 09:15:39 xen1 kernel: OCFS2 Node Manager 1.1.1
>Aug 30 09:15:39 xen1 sshd[4653]: Server listening on :: port 22.
>Aug 30 09:15:40 xen1 kernel: ocfs2_dlm: module not supported by Novell, setting U taint flag.
>Aug 30 09:15:40 xen1 kernel: OCFS2 DLM 1.1.1
>Aug 30 09:15:40 xen1 kernel: ocfs2_dlmfs: module not supported by Novell, setting U taint flag.
>Aug 30 09:15:40 xen1 kernel: OCFS2 DLMFS 1.1.1
>Aug 30 09:15:40 xen1 kernel: OCFS2 User DLM kernel interface loaded
>Aug 30 09:15:41 xen1 kernel: eth0: no IPv6 routers present
>Aug 30 09:15:43 xen1 kernel: store_evtchn = 19
>Aug 30 09:15:43 xen1 kernel: XENBUS xs_read_watch: 0
>Aug 30 09:15:44 xen1 kernel: Bridge firewalling registered
>Aug 30 09:15:44 xen1 kernel: device vif0.0 entered promiscuous mode
>Aug 30 09:15:44 xen1 kernel: device peth0 entered promiscuous mode
>Aug 30 09:15:44 xen1 kernel: xen-br0: port 1(vif0.0) entering learning state
>Aug 30 09:15:44 xen1 kernel: xen-br0: topology change detected, propagating
>Aug 30 09:15:44 xen1 kernel: xen-br0: port 1(vif0.0) entering forwarding state
>Aug 30 09:15:45 xen1 kernel: e100: peth0: e100_watchdog: link up, 100Mbps, full-duplex
>Aug 30 09:15:45 xen1 kernel: xen-br0: port 2(peth0) entering learning state
>Aug 30 09:15:45 xen1 kernel: xen-br0: topology change detected, propagating
>Aug 30 09:15:45 xen1 kernel: xen-br0: port 2(peth0) entering forwarding state
>Aug 30 09:15:48 xen1 kernel: scsi0 : iSCSI Initiator over TCP/IP, v.0.3
>Aug 30 09:15:48 xen1 kernel:   Vendor: UNH-IOL   Model: file-mode target  Rev: 1.2
>Aug 30 09:15:48 xen1 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 04
>Aug 30 09:15:48 xen1 kernel: SCSI device sda: 295692390 512-byte hdwr sectors (151395 MB)
>Aug 30 09:15:48 xen1 kernel: sda: got wrong page
>Aug 30 09:15:48 xen1 kernel: sda: assuming drive cache: write through
>Aug 30 09:15:48 xen1 kernel: SCSI device sda: 295692390 512-byte hdwr sectors (151395 MB)
>Aug 30 09:15:48 xen1 kernel: sda: got wrong page
>Aug 30 09:15:48 xen1 kernel: sda: assuming drive cache: write through
>Aug 30 09:15:48 xen1 kernel:  sda: unknown partition table
>Aug 30 09:15:48 xen1 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>Aug 30 09:15:49 xen1 ifup: Interface br0 is not available
>Aug 30 09:15:49 xen1 iscsid: connection0:0 is operational now
>Aug 30 09:15:53 xen1 kernel: peth0: no IPv6 routers present
>Aug 30 09:15:55 xen1 kernel: xen-br0: no IPv6 routers present
>Aug 30 09:15:55 xen1 kernel: vif0.0: no IPv6 routers present
>Aug 30 09:15:55 xen1 kernel: eth0: no IPv6 routers present
>Aug 30 09:16:08 xen1 kernel: scsi1 : iSCSI Initiator over TCP/IP, v.0.3
>Aug 30 09:16:08 xen1 kernel:   Vendor: UNH-IOL   Model: file-mode target  Rev: 1.2
>Aug 30 09:16:08 xen1 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 04
>Aug 30 09:16:08 xen1 kernel: SCSI device sdb: 295692390 512-byte hdwr sectors (151395 MB)
>Aug 30 09:16:08 xen1 kernel: sdb: got wrong page
>Aug 30 09:16:08 xen1 kernel: sdb: assuming drive cache: write through
>Aug 30 09:16:08 xen1 kernel: SCSI device sdb: 295692390 512-byte hdwr sectors (151395 MB)
>Aug 30 09:16:08 xen1 kernel: sdb: got wrong page
>Aug 30 09:16:08 xen1 kernel: sdb: assuming drive cache: write through
>Aug 30 09:16:08 xen1 kernel:  sdb: unknown partition table
>Aug 30 09:16:08 xen1 kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
>Aug 30 09:16:09 xen1 iscsid: picking unique OUI for the same target node name iqn.2002-10.edu.unh.iol.iscsi.draft20-target:0
>Aug 30 09:16:10 xen1 iscsid: connection1:0 is operational now
>Aug 30 09:16:15 xen1 login[5108]: FAILED LOGIN 1 FROM /dev/tty1 FOR root, Authentication failure
>Aug 30 09:31:20 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:31:20 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:31:21 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:31:21 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (3)
>Aug 30 09:31:21 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (3)
>Aug 30 09:31:21 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:31:21 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:31:22 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:31:22 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:31:22 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:31:23 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:31:23 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:31:23 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:31:24 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:31:24 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:31:24 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:31:24 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:31:24 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:31:25 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:31:25 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:31:25 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:31:26 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:31:26 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:31:26 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:31:27 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:31:43 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:31:55 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:31:56 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:31:59 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:31:59 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:32:02 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:32:03 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:32:06 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:32:07 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:32:09 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:32:10 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:32:13 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:32:13 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:32:14 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:32:16 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:32:17 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:32:17 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:32:20 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:32:20 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:32:20 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:32:23 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:32:24 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:32:24 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:32:24 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:32:24 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:32:25 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:32:25 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:32:25 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:32:25 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:32:26 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:32:26 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:32:26 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:32:26 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:32:27 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:32:27 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 09:32:27 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:32:27 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:32:28 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 09:32:28 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:32:28 xen1 iscsid: detected iSCSI connection (handle 0xc5a56000) error (1011) state (2)
>Aug 30 09:32:29 xen1 iscsid: detected iSCSI connection (handle 0xc3612e00) error (1011) state (2)
>Aug 30 09:32:29 xen1 iscsid: connection1:0 is operational after recovery (18 attempts)
>Aug 30 09:46:43 xen1 sshd[5360]: Did not receive identification string from 151.155.190.100
>Aug 30 09:46:43 xen1 sshd[5361]: Did not receive identification string from 151.155.190.100
>Aug 30 10:01:08 xen1 kernel: iscsi1: detected conn error (1011)
>Aug 30 10:01:08 xen1 kernel: iscsi0: detected conn error (1011)
>Aug 30 10:08:59 xen1 kernel: input.c: calling hotplug without a hotplug agent defined
>Aug 30 10:08:59 xen1 kernel: input.c: calling hotplug without a hotplug agent defined
>Aug 30 10:08:59 xen1 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
>Aug 30 10:15:31 xen1 syslog-ng[3942]: STATS: dropped 0

Actions: View

Attachments on bug 114171: 48203