Attachment 48639 Details for Bug 114879

another dmesg w/ noapic

dmesg.noapic.2 (text/plain), 21.09 KB, created by Jeff Mahoney on 2005-09-02 18:16:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jeff Mahoney

Created: 2005-09-02 18:16:42 UTC

Size: 21.09 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/system/root vga=0x314 selinux=0  no_timer_check  resume=/dev/hda6 splash=silent noapic)
>Linux version 2.6.13-rc6-git13-4-default (geeko@buildhost) (gcc version 4.0.2 20050818 (prerelease) (SUSE Linux)) #1 Mon Aug 22 18:38:22 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
> BIOS-e820: 000000003fef0000 - 000000003fefb000 (ACPI data)
> BIOS-e820: 000000003fefb000 - 000000003ff00000 (ACPI NVS)
> BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f6a80
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x000000003fef4900
>ACPI: FADT (v001 ATI    Firanha  0x06040000 ATI  0x000f4240) @ 0x000000003fefadff
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x000000003fefae73
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x000000003fefaf6a
>ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x000000003fefafc4
>ACPI: DSDT (v001    ATI    SB400 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
>On node 0 totalpages: 261872
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 257776 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID:          <6>Product ID:              <6>APIC at: 0xFEE00000
>I/O APIC #1 Version 33 at 0xFEC00000.
>Setting APIC routing to flat
>Processors: 1
>Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
>Checking aperture...
>CPU 0: aperture @ b8000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Built 1 zonelists
>Kernel command line: root=/dev/system/root vga=0x314 selinux=0  no_timer_check  resume=/dev/hda6 splash=silent noapic
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 2000.151 MHz processor.
>time.c: Using PIT/TSC based timekeeping.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Memory: 1023520k/1047488k available (2364k kernel code, 22988k reserved, 1231k data, 176k init)
>Calibrating delay using timer specific routine.. 4008.31 BogoMIPS (lpj=8016633)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>mtrr: v2.0 (20020519)
>CPU: AMD Turion(tm) 64 Mobile Technology ML-37 stepping 02
>checking if image is initramfs... it is
>ACPI: Looking for DSDT in initramfs... found /DSDT.aml ... successfully read 23292 bytes from /DSDT.aml
>ACPI: Using customized DSDT
>   tbget-0306: *** Info: Table [DSDT] replaced by host OS
> tbxface-0120 [02] acpi_load_tables      : ACPI Tables successfully acquired
>Parsing all Control Methods:.................................................................................................................................................................................
>Table [DSDT](id F005) - 728 Objects with 61 Devices 177 Methods 31 Regions
>Parsing all Control Methods:
>Table [SSDT](id F003) - 3 Objects with 0 Devices 0 Methods 0 Regions
>ACPI Namespace successfully loaded at root ffffffff804f5580
>ACPI: setting ELCR to 0200 (from 0c00)
>evxfevnt-0096 [03] acpi_enable           : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>Detected 12.500 MHz APIC timer.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>evgpeblk-1016 [06] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
>evgpeblk-1024 [06] ev_create_gpe_block   : Found 4 Wake, Enabled 2 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:....................................................................
>Initialized 31/31 Regions 0/0 Fields 19/19 Buffers 18/25 Packages (740 nodes)
>Executing all Device _STA and_INI methods:.................................................................
>65 Devices found containing: 65 _STA, 5 _INI methods
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>nsxfeval-0251 [06] acpi_evaluate_object  : Handle is NULL and Pathname is relative
>nsxfeval-0251 [06] acpi_evaluate_object  : Handle is NULL and Pathname is relative
>nsxfeval-0251 [06] acpi_evaluate_object  : Handle is NULL and Pathname is relative
>nsxfeval-0251 [06] acpi_evaluate_object  : Handle is NULL and Pathname is relative
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
>ACPI: Embedded Controller [EC0] (gpe 16)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Bridge: 0000:00:02.0
>  IO window: 9000-9fff
>  MEM window: c0100000-c01fffff
>  PREFETCH window: c8000000-cfffffff
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: c0200000-c02fffff
>  PREFETCH window: disabled.
>PCI: Bus 7, cardbus bridge: 0000:06:09.0
>  IO window: 00001000-00001fff
>  IO window: 00002000-00002fff
>  PREFETCH window: 40000000-41ffffff
>  MEM window: 42000000-43ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: 1000-2fff
>  MEM window: c0300000-c03fffff
>  PREFETCH window: 40000000-41ffffff
>PCI: 0000:00:02.0 has unsupported PM cap regs version (3)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: 0000:00:06.0 has unsupported PM cap regs version (3)
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Enabling device 0000:06:09.0 (0004 -> 0007)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:06:09.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1125655912.184:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>PCI: 0000:00:02.0 has unsupported PM cap regs version (3)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>PCI: 0000:00:06.0 has unsupported PM cap regs version (3)
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>vesafb: framebuffer at 0xc8000000, mapped to 0xffffc20000080000, using 3750k, total 16384k
>vesafb: mode is 800x600x16, linelength=1600, pages=16
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 49925 bytes,<6>...found (800x600, 8809 bytes, v3).
>Console: switching to colour frame buffer device 99x34
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:14.6 disabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>OHC1 OHC2 EHCI  LAN  P2P AUDO MODM 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 176k freed
>udev[871]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>udev[876]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[878]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>input: AT Translated Set 2 keyboard on isa0060/serio0
>udev[879]: main: action, subsystem or devpath missing
>udev[883]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[886]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: ST9100823A, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>udev[889]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>hdc: MATSHITADVD-RAM UJ-845S, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>udev[895]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>udev[899]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[900]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
>udev[904]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[906]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
>udev[907]: main: action, subsystem or devpath missing
>ACPI: Thermal Zone [THRM] (55 C)
>udev[912]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[916]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[919]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>udev[923]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[927]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[930]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>hda: max request size: 1024KiB
>hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
>udev[931]: import_file_into_env: can't open '/sbin/path_id /block/hda'
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
>udev[958]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[962]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[965]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>udev[969]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[970]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[973]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[974]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[975]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[976]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[977]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[978]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[979]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>udev[987]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[991]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1008]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1014]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>udev[1017]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>spurious 8259A interrupt: IRQ7.
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:06:09.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:06:09.0 [1025:007e]
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 11, io mem 0xc0002000
>ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 11, io mem 0xc0000000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 11, io mem 0xc0001000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>Yenta: ISA IRQ mask 0x00f8, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x1000 - 0x2fff
>pcmcia: parent PCI bridge Memory window: 0xc0300000 - 0xc03fffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x41ffffff
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>irq 11: nobody cared (try booting with the "irqpoll" option)
>
>Call Trace: <IRQ> <ffffffff801580d5>{__report_bad_irq+53} <ffffffff801582e7>{note_interrupt+439}
>       <ffffffff80157c4f>{__do_IRQ+207} <ffffffff80111498>{do_IRQ+72}
>       <ffffffff8010eede>{ret_from_intr+0} <ffffffff80138648>{__do_softirq+72}
>       <ffffffff8010f993>{call_softirq+31} <ffffffff80111440>{do_softirq+48}
>       <ffffffff8011149d>{do_IRQ+77} <ffffffff8010eede>{ret_from_intr+0}
>        <EOI> 
>handlers:
>[<ffffffff88114dc0>] (snd_atiixp_interrupt+0x0/0xf0 [snd_atiixp])
>[<ffffffff88131f30>] (yenta_interrupt+0x0/0xc0 [yenta_socket])
>[<ffffffff8813fb20>] (usb_hcd_irq+0x0/0x70 [usbcore])
>[<ffffffff8813fb20>] (usb_hcd_irq+0x0/0x70 [usbcore])
>[<ffffffff8813fb20>] (usb_hcd_irq+0x0/0x70 [usbcore])
>Disabling IRQ #11
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:06:09.2[C] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[c0309000-c03097ff]  Max Packet=[2048]
>tg3.c:v3.36 (August 19, 2005)
>acpi_bus-0212 [01] acpi_bus_set_power    : Device is not power manageable
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>eth0: Tigon3 [partno(BCM95789) rev 4101 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:a7:0a:39
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000]
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ReiserFS: hda7: found reiserfs format "3.6" with standard journal
>ReiserFS: hda7: using ordered data mode
>ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda7: checking transaction log (hda7)
>ReiserFS: hda7: Using r5 hash to sort names
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff80446b40(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (4091 buckets, 32728 max) - 304 bytes per conntrack
>Adding 2104472k swap on /dev/hda6.  Priority:-1 extents:1
>bootsplash: status on console 0 changed to on
>SubDomain: SubDomain (version 1.2-13.42r5011imnx_suse) initialized
>SubDomain: Control variable 'owlsm' changed to 0
>NET: Registered protocol family 17
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>mtrr: 0xc8000000,0x8000000 overlaps existing 0xc8000000,0x1000000
>eth0: no IPv6 routers present
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 not a capable Intel processor
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x4 (1450 mV)
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
>powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x8 (1350 mV)
>powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
>cpu_init done, current fid 0xc, vid 0x4
>bootsplash: status on console 0 changed to on
>bootsplash: status on console 0 changed to on
>SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.1.24 DST=192.168.1.13 LEN=40 TOS=0x10 PREC=0x00 TTL=64 ID=3 DF PROTO=TCP SPT=22 DPT=53766 WINDOW=0 RES=0x00 RST URGP=0 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.24 DST=224.0.0.251 LEN=111 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=91 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:c0:9f:a7:0a:39:00:0e:a6:6c:24:4b:08:00 SRC=192.168.1.13 DST=192.168.1.24 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14671 DF PROTO=TCP SPT=45374 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A141AADA20000000001030302) 
>SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:c0:9f:a7:0a:39:00:0e:a6:6c:24:4b:08:00 SRC=192.168.1.13 DST=192.168.1.24 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=39658 DF PROTO=TCP SPT=45375 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A141AB7D40000000001030302) 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.24 DST=224.0.0.251 LEN=111 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=91 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.24 DST=224.0.0.251 LEN=111 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=91

Actions: View

Attachments on bug 114879: 48541 | 48542 | 48543 | 48637 | 48638 | 48639